Return-path: Received: from mail-pz0-f192.google.com ([209.85.222.192]:52807 "EHLO mail-pz0-f192.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754157AbZH0A1f (ORCPT ); Wed, 26 Aug 2009 20:27:35 -0400 Received: by pzk30 with SMTP id 30so693575pzk.4 for ; Wed, 26 Aug 2009 17:27:37 -0700 (PDT) Message-ID: <4A95D2A8.9090208@lwfinger.net> Date: Wed, 26 Aug 2009 19:26:16 -0500 From: Larry Finger MIME-Version: 1.0 To: =?UTF-8?B?R8OhYm9yIFN0ZWZhbmlr?= CC: John Linville , Michael Buesch , Mark Huijgen , Broadcom Wireless , linux-wireless Subject: Congratulations References: <1251323178-7173-1-git-send-email-netrolller.3d@gmail.com> In-Reply-To: <1251323178-7173-1-git-send-email-netrolller.3d@gmail.com> Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: Gábor, Congratulations on your progress. With today's patches my BCM4312 802.11b/g card with PCI ID 14e4:4315 works - I'm using it at the moment. I'm using WPA2 encryption and have connected to APs on channels 1 and 11. My logs are clean. As you noted, performance is a little weak, but I get transmits of 9-11 Mb/s and receive rates up to 18 Mb/s - eminently usable. I certainly hope that you get the patches approved so that these changes will be in the 2.6.32 kernel. Once again, congratulations to you, Michael, and the others members of the reverse engineering team. Seeing the device comes to life makes all those hours of staring at MIPS binary code seem very worthwhile. For those of you with N PHYs, the RE of those devices will be my next step. Larry