Return-path: Received: from bombadil.infradead.org ([18.85.46.34]:45308 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756518AbZHNAnE (ORCPT ); Thu, 13 Aug 2009 20:43:04 -0400 From: "Luis R. Rodriguez" To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, "Luis R. Rodriguez" Subject: [PATCH v2 19/25] wireless: organize individual drivers alphabetically Date: Thu, 13 Aug 2009 20:42:58 -0400 Message-Id: <1250210584-13374-20-git-send-email-lrodriguez@atheros.com> In-Reply-To: <1250210584-13374-1-git-send-email-lrodriguez@atheros.com> References: <1250210584-13374-1-git-send-email-lrodriguez@atheros.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Luis R. Rodriguez --- drivers/net/wireless/Kconfig | 95 +++++++++++++++++++++--------------------- 1 files changed, 47 insertions(+), 48 deletions(-) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 59e4664..45e9cf2 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -14,30 +14,6 @@ menuconfig WLAN_PRE80211 This option does not affect the kernel build, it only lets you choose drivers. -config STRIP - tristate "STRIP (Metricom starmode radio IP)" - depends on INET && WLAN_PRE80211 - select WIRELESS_EXT - ---help--- - Say Y if you have a Metricom radio and intend to use Starmode Radio - IP. STRIP is a radio protocol developed for the MosquitoNet project - (on the WWW at ) to send Internet - traffic using Metricom radios. Metricom radios are small, battery - powered, 100kbit/sec packet radio transceivers, about the size and - weight of a cellular telephone. (You may also have heard them called - "Metricom modems" but we avoid the term "modem" because it misleads - many people into thinking that you can plug a Metricom modem into a - phone line and use it as a modem.) - - You can use STRIP on any Linux machine with a serial port, although - it is obviously most useful for people with laptop computers. If you - think you might get a Metricom radio in the future, there is no harm - in saying Y to STRIP now, except that it makes the kernel a bit - bigger. - - To compile this as a module, choose M here: the module will be - called strip. - config ARLAN tristate "Aironet Arlan 655 & IC2200 DS support" depends on ISA && !64BIT && WLAN_PRE80211 @@ -89,6 +65,30 @@ config PCMCIA_WAVELAN To compile this driver as a module, choose M here: the module will be called wavelan_cs. If unsure, say N. +config STRIP + tristate "STRIP (Metricom starmode radio IP)" + depends on INET && WLAN_PRE80211 + select WIRELESS_EXT + ---help--- + Say Y if you have a Metricom radio and intend to use Starmode Radio + IP. STRIP is a radio protocol developed for the MosquitoNet project + (on the WWW at ) to send Internet + traffic using Metricom radios. Metricom radios are small, battery + powered, 100kbit/sec packet radio transceivers, about the size and + weight of a cellular telephone. (You may also have heard them called + "Metricom modems" but we avoid the term "modem" because it misleads + many people into thinking that you can plug a Metricom modem into a + phone line and use it as a modem.) + + You can use STRIP on any Linux machine with a serial port, although + it is obviously most useful for people with laptop computers. If you + think you might get a Metricom radio in the future, there is no harm + in saying Y to STRIP now, except that it makes the kernel a bit + bigger. + + To compile this as a module, choose M here: the module will be + called strip. + config PCMCIA_NETWAVE tristate "Xircom Netwave AirSurfer Pcmcia wireless support" depends on PCMCIA && WLAN_PRE80211 @@ -100,7 +100,6 @@ config PCMCIA_NETWAVE To compile this driver as a module, choose M here: the module will be called netwave_cs. If unsure, say N. - menuconfig WLAN_80211 bool "Wireless LAN (IEEE 802.11)" depends on NETDEVICES @@ -509,28 +508,6 @@ config USB_ZD1201 endif # ZYDAS_80211 -config PCMCIA_RAYCS - tristate "Aviator/Raytheon 2.4GHz wireless support" - depends on PCMCIA && WLAN_80211 - select WIRELESS_EXT - ---help--- - Say Y here if you intend to attach an Aviator/Raytheon PCMCIA - (PC-card) wireless Ethernet networking card to your computer. - Please read the file for - details. - - To compile this driver as a module, choose M here: the module will be - called ray_cs. If unsure, say N. - -config PCMCIA_WL3501 - tristate "Planet WL3501 PCMCIA cards" - depends on EXPERIMENTAL && PCMCIA && WLAN_80211 - select WIRELESS_EXT - ---help--- - A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. - It has basic support for Linux wireless extensions and initial - micro support for ethtool. - config ADM8211 tristate "ADMtek ADM8211 support" depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL @@ -558,8 +535,30 @@ config ADM8211 Thanks to Infineon-ADMtek for their support of this driver. -source "drivers/net/wireless/hostap/Kconfig" +config PCMCIA_RAYCS + tristate "Aviator/Raytheon 2.4GHz wireless support" + depends on PCMCIA && WLAN_80211 + select WIRELESS_EXT + ---help--- + Say Y here if you intend to attach an Aviator/Raytheon PCMCIA + (PC-card) wireless Ethernet networking card to your computer. + Please read the file for + details. + + To compile this driver as a module, choose M here: the module will be + called ray_cs. If unsure, say N. + source "drivers/net/wireless/orinoco/Kconfig" +source "drivers/net/wireless/hostap/Kconfig" + +config PCMCIA_WL3501 + tristate "Planet WL3501 PCMCIA cards" + depends on EXPERIMENTAL && PCMCIA && WLAN_80211 + select WIRELESS_EXT + ---help--- + A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. + It has basic support for Linux wireless extensions and initial + micro support for ethtool. config USB_NET_RNDIS_WLAN tristate "Wireless RNDIS USB support" -- 1.6.2.5