Return-path: Received: from mx51.mymxserver.com ([85.199.173.110]:12904 "EHLO mx51.mymxserver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932696AbZJFOdS (ORCPT ); Tue, 6 Oct 2009 10:33:18 -0400 From: Holger Schurig To: linux-wireless@vger.kernel.org Subject: [PATCH] libertas: first stab at cfg80211 support Date: Tue, 6 Oct 2009 16:31:54 +0200 Cc: John W Linville , Dan Williams MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Message-Id: <200910061631.54859.hs4233@mail.mn-solutions.de> Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Holger Schurig Index: linux-wl/drivers/net/wireless/libertas/defs.h =================================================================== --- linux-wl.orig/drivers/net/wireless/libertas/defs.h 2009-10-06 11:07:46.000000000 +0200 +++ linux-wl/drivers/net/wireless/libertas/defs.h 2009-10-06 11:08:43.000000000 +0200 @@ -42,6 +42,7 @@ #define LBS_DEB_SDIO 0x00400000 #define LBS_DEB_SYSFS 0x00800000 #define LBS_DEB_SPI 0x01000000 +#define LBS_DEB_CFG80211 0x02000000 extern unsigned int lbs_debug; @@ -86,6 +87,7 @@ do { if ((lbs_debug & (grp)) == (grp)) \ #define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args) #define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args) #define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args) +#define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args) #define lbs_pr_info(format, args...) \ printk(KERN_INFO DRV_NAME": " format, ## args) Index: linux-wl/drivers/net/wireless/libertas/dev.h =================================================================== --- linux-wl.orig/drivers/net/wireless/libertas/dev.h 2009-10-06 11:08:25.000000000 +0200 +++ linux-wl/drivers/net/wireless/libertas/dev.h 2009-10-06 15:22:40.000000000 +0200 @@ -100,6 +100,7 @@ struct lbs_mesh_stats { /** Private structure for the MV device */ struct lbs_private { + struct wireless_dev *wdev; int mesh_open; int mesh_fw_ver; int infra_open; Index: linux-wl/drivers/net/wireless/libertas/cfg.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-wl/drivers/net/wireless/libertas/cfg.h 2009-10-06 13:56:57.000000000 +0200 @@ -0,0 +1,16 @@ +#ifndef __LBS_CFG80211_H__ +#define __LBS_CFG80211_H__ + +#include "dev.h" + +struct wireless_dev *lbs_cfg_alloc(struct device *dev); +int lbs_cfg_register(struct lbs_private *priv); +void lbs_cfg_free(struct lbs_private *priv); + +int lbs_send_specific_ssid_scan(struct lbs_private *priv, u8 *ssid, + u8 ssid_len); +int lbs_scan_networks(struct lbs_private *priv, int full_scan); +void lbs_cfg_scan_worker(struct work_struct *work); + + +#endif Index: linux-wl/drivers/net/wireless/libertas/cfg.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-wl/drivers/net/wireless/libertas/cfg.c 2009-10-06 15:23:34.000000000 +0200 @@ -0,0 +1,198 @@ +/* + * Implement cfg80211 ("iw") support. + * + * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany + * Holger Schurig + * + */ + +#include + +#include "cfg.h" +#include "cmd.h" + + +#define CHAN2G(_channel, _freq, _flags) { \ + .band = IEEE80211_BAND_2GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_channel), \ + .flags = (_flags), \ + .max_antenna_gain = 0, \ + .max_power = 30, \ +} + +static struct ieee80211_channel lbs_2ghz_channels[] = { + CHAN2G(1, 2412, 0), + CHAN2G(2, 2417, 0), + CHAN2G(3, 2422, 0), + CHAN2G(4, 2427, 0), + CHAN2G(5, 2432, 0), + CHAN2G(6, 2437, 0), + CHAN2G(7, 2442, 0), + CHAN2G(8, 2447, 0), + CHAN2G(9, 2452, 0), + CHAN2G(10, 2457, 0), + CHAN2G(11, 2462, 0), + CHAN2G(12, 2467, 0), + CHAN2G(13, 2472, 0), + CHAN2G(14, 2484, 0), +}; + +#define RATETAB_ENT(_rate, _rateid, _flags) { \ + .bitrate = (_rate), \ + .hw_value = (_rateid), \ + .flags = (_flags), \ +} + + +static struct ieee80211_rate lbs_rates[] = { + RATETAB_ENT(10, 0x1, 0), + RATETAB_ENT(20, 0x2, 0), + RATETAB_ENT(55, 0x4, 0), + RATETAB_ENT(110, 0x8, 0), + RATETAB_ENT(60, 0x10, 0), + RATETAB_ENT(90, 0x20, 0), + RATETAB_ENT(120, 0x40, 0), + RATETAB_ENT(180, 0x80, 0), + RATETAB_ENT(240, 0x100, 0), + RATETAB_ENT(360, 0x200, 0), + RATETAB_ENT(480, 0x400, 0), + RATETAB_ENT(540, 0x800, 0), +}; + +static struct ieee80211_supported_band lbs_band_2ghz = { + .channels = lbs_2ghz_channels, + .n_channels = ARRAY_SIZE(lbs_2ghz_channels), + .bitrates = lbs_rates, + .n_bitrates = ARRAY_SIZE(lbs_rates), +}; + + +static const u32 cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, +}; + + + +static int lbs_cfg_set_channel(struct wiphy *wiphy, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + int ret = -ENOTSUPP; + + lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", chan->center_freq, channel_type); + + if (channel_type != NL80211_CHAN_NO_HT) + goto out; + + ret = lbs_set_channel(priv, chan->hw_value); + + out: + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + + + +static struct cfg80211_ops lbs_cfg80211_ops = { + .set_channel = lbs_cfg_set_channel, +}; + + +/* + * At this time lbs_private *priv doesn't even exist, so we just allocate + * memory and don't initialize the wiphy further. This is postponed until we + * can talk to the firmware and happens at registration time in + * lbs_cfg_wiphy_register(). + */ +struct wireless_dev *lbs_cfg_alloc(struct device *dev) +{ + int ret = 0; + struct wireless_dev *wdev; + + lbs_deb_enter(LBS_DEB_CFG80211); + + wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); + if (!wdev) { + dev_err(dev, "cannot allocate wireless device\n"); + return ERR_PTR(-ENOMEM); + } + + wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private)); + if (!wdev->wiphy) { + dev_err(dev, "cannot allocate wiphy\n"); + ret = -ENOMEM; + goto err_wiphy_new; + } + + lbs_deb_leave(LBS_DEB_CFG80211); + return wdev; + + err_wiphy_new: + kfree(wdev); + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ERR_PTR(ret); +} + + +/* + * This function get's called after lbs_setup_firmware() determined the + * firmware capabities. So we can setup the wiphy according to our + * hardware/firmware. + */ +int lbs_cfg_register(struct lbs_private *priv) +{ + struct wireless_dev *wdev = priv->wdev; + int ret; + + lbs_deb_enter(LBS_DEB_CFG80211); + + wdev->wiphy->max_scan_ssids = 1; + wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + + /* TODO: BIT(NL80211_IFTYPE_ADHOC); */ + wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + + /* TODO: honor priv->regioncode */ + wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz; + + /* + * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have + * never seen a firmware without WPA + */ + wdev->wiphy->cipher_suites = cipher_suites; + wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + + ret = wiphy_register(wdev->wiphy); + if (ret < 0) + lbs_pr_err("cannot register wiphy device\n"); + + ret = register_netdev(priv->dev); + if (ret) + lbs_pr_err("cannot register network device\n"); + + lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); + return ret; +} + + +void lbs_cfg_free(struct lbs_private *priv) +{ + struct wireless_dev *wdev = priv->wdev; + + lbs_deb_enter(LBS_DEB_CFG80211); + + if (!wdev) + return; + + if (wdev->wiphy) { + wiphy_unregister(wdev->wiphy); + wiphy_free(wdev->wiphy); + } + kfree(wdev); +} Index: linux-wl/drivers/net/wireless/libertas/main.c =================================================================== --- linux-wl.orig/drivers/net/wireless/libertas/main.c 2009-10-06 11:08:25.000000000 +0200 +++ linux-wl/drivers/net/wireless/libertas/main.c 2009-10-06 15:22:40.000000000 +0200 @@ -14,11 +14,13 @@ #include #include #include +#include #include "host.h" #include "decl.h" #include "dev.h" #include "wext.h" +#include "cfg.h" #include "debugfs.h" #include "scan.h" #include "assoc.h" @@ -1245,31 +1247,42 @@ static const struct net_device_ops lbs_n */ struct lbs_private *lbs_add_card(void *card, struct device *dmdev) { - struct net_device *dev = NULL; + struct net_device *dev; + struct wireless_dev *wdev; struct lbs_private *priv = NULL; lbs_deb_enter(LBS_DEB_MAIN); /* Allocate an Ethernet device and register it */ - dev = alloc_etherdev(sizeof(struct lbs_private)); - if (!dev) { - lbs_pr_err("init wlanX device failed\n"); + wdev = lbs_cfg_alloc(dmdev); + if (IS_ERR(wdev)) { + lbs_pr_err("cfg80211 init failed\n"); goto done; } - priv = netdev_priv(dev); - dev->ml_priv = priv; + /* TODO? */ + wdev->iftype = NL80211_IFTYPE_STATION; + priv = wdev_priv(wdev); + priv->wdev = wdev; if (lbs_init_adapter(priv)) { lbs_pr_err("failed to initialize adapter structure.\n"); - goto err_init_adapter; + goto err_wdev; } + //TODO? dev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES); + dev = alloc_netdev(0, "wlan%d", ether_setup); + if (!dev) { + dev_err(dmdev, "no memory for network device instance\n"); + goto err_adapter; + } + + dev->netdev_ops = &lbs_netdev_ops; + dev->ieee80211_ptr = wdev; + dev->ml_priv = priv; + SET_NETDEV_DEV(dev, dmdev); + wdev->netdev = dev; priv->dev = dev; - priv->card = card; - priv->mesh_open = 0; - priv->infra_open = 0; - /* Setup the OS Interface to our functions */ dev->netdev_ops = &lbs_netdev_ops; dev->watchdog_timeo = 5 * HZ; dev->ethtool_ops = &lbs_ethtool_ops; @@ -1278,7 +1291,14 @@ struct lbs_private *lbs_add_card(void *c #endif dev->flags |= IFF_BROADCAST | IFF_MULTICAST; - SET_NETDEV_DEV(dev, dmdev); + + // TODO: kzalloc + iwm_init_default_profile(iwm, iwm->umac_profile); ?? + + + priv->card = card; + priv->mesh_open = 0; + priv->infra_open = 0; + priv->rtap_net_dev = NULL; strcpy(dev->name, "wlan%d"); @@ -1288,7 +1308,7 @@ struct lbs_private *lbs_add_card(void *c priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main"); if (IS_ERR(priv->main_thread)) { lbs_deb_thread("Error creating main thread.\n"); - goto err_init_adapter; + goto err_ndev; } priv->work_thread = create_singlethread_workqueue("lbs_worker"); @@ -1305,9 +1325,15 @@ struct lbs_private *lbs_add_card(void *c goto done; -err_init_adapter: - lbs_free_adapter(priv); + err_ndev: free_netdev(dev); + + err_adapter: + lbs_free_adapter(priv); + + err_wdev: + lbs_cfg_free(priv); + priv = NULL; done: @@ -1359,6 +1385,7 @@ void lbs_remove_card(struct lbs_private kthread_stop(priv->main_thread); lbs_free_adapter(priv); + lbs_cfg_free(priv); priv->dev = NULL; free_netdev(dev); @@ -1383,8 +1410,8 @@ int lbs_start_card(struct lbs_private *p /* init 802.11d */ lbs_init_11d(priv); - if (register_netdev(dev)) { - lbs_pr_err("cannot register ethX device\n"); + if (lbs_cfg_register(priv)) { + lbs_pr_err("cannot register device\n"); goto done; } Index: linux-wl/drivers/net/wireless/libertas/Makefile =================================================================== --- linux-wl.orig/drivers/net/wireless/libertas/Makefile 2009-10-06 11:08:43.000000000 +0200 +++ linux-wl/drivers/net/wireless/libertas/Makefile 2009-10-06 15:22:40.000000000 +0200 @@ -1,5 +1,6 @@ libertas-y += 11d.o libertas-y += assoc.o +libertas-y += cfg.o libertas-y += cmd.o libertas-y += cmdresp.o libertas-y += debugfs.o -- http://www.holgerschurig.de