Return-path: Received: from smtp.nokia.com ([192.100.122.233]:36154 "EHLO mgw-mx06.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933730AbZJMJuA (ORCPT ); Tue, 13 Oct 2009 05:50:00 -0400 From: Luciano Coelho To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, Juuso Oikarinen Subject: [PATCH 02/22] wl1271: Add structure for firmware configuration values Date: Tue, 13 Oct 2009 12:47:39 +0300 Message-Id: <1255427279-1224-3-git-send-email-luciano.coelho@nokia.com> In-Reply-To: <1255427279-1224-1-git-send-email-luciano.coelho@nokia.com> References: <1255427279-1224-1-git-send-email-luciano.coelho@nokia.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Juuso Oikarinen In order to make the firmware configuration more manageable, collect hardcoded configuration values into one data structure, and set default values there. Add the SoftGemini BT/WLAN coex paramters into the config structure. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho --- drivers/net/wireless/wl12xx/wl1271.h | 5 + drivers/net/wireless/wl12xx/wl1271_acx.c | 40 ++----- drivers/net/wireless/wl12xx/wl1271_acx.h | 136 +++------------------- drivers/net/wireless/wl12xx/wl1271_cmd.c | 6 +- drivers/net/wireless/wl12xx/wl1271_cmd.h | 5 - drivers/net/wireless/wl12xx/wl1271_conf.h | 178 +++++++++++++++++++++++++++++ drivers/net/wireless/wl12xx/wl1271_main.c | 84 ++++++++++---- drivers/net/wireless/wl12xx/wl1271_reg.h | 44 ------- 8 files changed, 274 insertions(+), 224 deletions(-) create mode 100644 drivers/net/wireless/wl12xx/wl1271_conf.h diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h index aa9bb2e..64a3270 100644 --- a/drivers/net/wireless/wl12xx/wl1271.h +++ b/drivers/net/wireless/wl12xx/wl1271.h @@ -32,6 +32,8 @@ #include #include +#include "wl1271_conf.h" + #define DRIVER_NAME "wl1271" #define DRIVER_PREFIX DRIVER_NAME ": " @@ -420,6 +422,9 @@ struct wl1271 { /* Used for a workaround to send disconnect before rejoining */ bool joined; + + /* Current chipset configuration */ + struct conf_drv_settings conf; }; int wl1271_plt_start(struct wl1271 *wl); diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index 6c29890..d19d860 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -509,6 +509,7 @@ out: int wl1271_acx_sg_cfg(struct wl1271 *wl) { struct acx_bt_wlan_coex_param *param; + struct conf_sg_settings *c = &wl->conf.sg; int ret; wl1271_debug(DEBUG_ACX, "acx sg cfg"); @@ -520,34 +521,17 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl) } /* BT-WLAN coext parameters */ - param->min_rate = RATE_INDEX_24MBPS; - param->bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF; - param->wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF; - param->sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF; - param->rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF; - param->tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF; - param->rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF; - param->tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF; - param->wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF; - param->bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF; - param->next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF; - param->wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF; - param->hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF; - param->next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF; - param->antenna_type = PTA_ANTENNA_TYPE_DEF; - param->signal_type = PTA_SIGNALING_TYPE_DEF; - param->afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF; - param->quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF; - param->max_cts = PTA_MAX_NUM_CTS_DEF; - param->wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF; - param->bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF; - param->missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF; - param->wlan_elp_hp = PTA_ELP_HP_DEF; - param->bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF; - param->ack_mode_dual_ant = PTA_ACK_MODE_DEF; - param->pa_sd_enable = PTA_ALLOW_PA_SD_DEF; - param->pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF; - param->bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF; + param->per_threshold = c->per_threshold; + param->max_scan_compensation_time = c->max_scan_compensation_time; + param->nfs_sample_interval = c->nfs_sample_interval; + param->load_ratio = c->load_ratio; + param->auto_ps_mode = c->auto_ps_mode; + param->probe_req_compensation = c->probe_req_compensation; + param->scan_window_compensation = c->scan_window_compensation; + param->antenna_config = c->antenna_config; + param->beacon_miss_threshold = c->beacon_miss_threshold; + param->rate_adaptation_threshold = c->rate_adaptation_threshold; + param->rate_adaptation_snr = c->rate_adaptation_snr; ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param)); if (ret < 0) { diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h index 0c704af..8e3b97c 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.h +++ b/drivers/net/wireless/wl12xx/wl1271_acx.h @@ -496,126 +496,18 @@ struct acx_smart_reflex_config_params { struct acx_bt_wlan_coex_param { struct acx_header header; - /* - * The minimum rate of a received WLAN packet in the STA, - * during protective mode, of which a new BT-HP request - * during this Rx will always be respected and gain the antenna. - */ - u32 min_rate; - - /* Max time the BT HP will be respected. */ - u16 bt_hp_max_time; - - /* Max time the WLAN HP will be respected. */ - u16 wlan_hp_max_time; - - /* - * The time between the last BT activity - * and the moment when the sense mode returns - * to SENSE_INACTIVE. - */ - u16 sense_disable_timer; - - /* Time before the next BT HP instance */ - u16 rx_time_bt_hp; - u16 tx_time_bt_hp; - - /* range: 10-20000 default: 1500 */ - u16 rx_time_bt_hp_fast; - u16 tx_time_bt_hp_fast; - - /* range: 2000-65535 default: 8700 */ - u16 wlan_cycle_fast; - - /* range: 0 - 15000 (Msec) default: 1000 */ - u16 bt_anti_starvation_period; - - /* range 400-10000(Usec) default: 3000 */ - u16 next_bt_lp_packet; - - /* Deafult: worst case for BT DH5 traffic */ - u16 wake_up_beacon; - - /* range: 0-50000(Usec) default: 1050 */ - u16 hp_dm_max_guard_time; - - /* - * This is to prevent both BT & WLAN antenna - * starvation. - * Range: 100-50000(Usec) default:2550 - */ - u16 next_wlan_packet; - - /* 0 -> shared antenna */ - u8 antenna_type; - - /* - * 0 -> TI legacy - * 1 -> Palau - */ - u8 signal_type; - - /* - * BT AFH status - * 0 -> no AFH - * 1 -> from dedicated GPIO - * 2 -> AFH on (from host) - */ - u8 afh_leverage_on; - - /* - * The number of cycles during which no - * TX will be sent after 1 cycle of RX - * transaction in protective mode - */ - u8 quiet_cycle_num; - - /* - * The maximum number of CTSs that will - * be sent for receiving RX packet in - * protective mode - */ - u8 max_cts; - - /* - * The number of WLAN packets - * transferred in common mode before - * switching to BT. - */ - u8 wlan_packets_num; - - /* - * The number of BT packets - * transferred in common mode before - * switching to WLAN. - */ - u8 bt_packets_num; - - /* range: 1-255 default: 5 */ - u8 missed_rx_avalanche; - - /* range: 0-1 default: 1 */ - u8 wlan_elp_hp; - - /* range: 0 - 15 default: 4 */ - u8 bt_anti_starvation_cycles; - - u8 ack_mode_dual_ant; - - /* - * Allow PA_SD assertion/de-assertion - * during enabled BT activity. - */ - u8 pa_sd_enable; - - /* - * Enable/Disable PTA in auto mode: - * Support Both Active & P.S modes - */ - u8 pta_auto_mode_enable; - - /* range: 0 - 20 default: 1 */ - u8 bt_hp_respected_num; + u32 per_threshold; + u32 max_scan_compensation_time; + u16 nfs_sample_interval; + u8 load_ratio; + u8 auto_ps_mode; + u8 probe_req_compensation; + u8 scan_window_compensation; + u8 antenna_config; + u8 beacon_miss_threshold; + u32 rate_adaptation_threshold; + s8 rate_adaptation_snr; + u8 padding[3]; } __attribute__ ((packed)); #define CCA_THRSH_ENABLE_ENERGY_D 0x140A @@ -690,6 +582,10 @@ struct acx_event_mask { #define SCAN_TRIGGERED BIT(2) #define SCAN_PRIORITY_HIGH BIT(3) +/* When set, disable HW encryption */ +#define DF_ENCRYPTION_DISABLE 0x01 +#define DF_SNIFF_MODE_ENABLE 0x80 + struct acx_feature_config { struct acx_header header; diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index eaa1de9..c7a8a64 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -229,8 +229,8 @@ int wl1271_cmd_join(struct wl1271 *wl) join->rx_config_options = 0; join->rx_filter_options = WL1271_DEFAULT_RX_FILTER; - join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | - RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; + join->basic_rate_set = CONF_HW_BIT_RATE_1MBPS | CONF_HW_BIT_RATE_2MBPS | + CONF_HW_BIT_RATE_5_5MBPS | CONF_HW_BIT_RATE_11MBPS; join->beacon_interval = WL1271_DEFAULT_BEACON_INT; join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD; @@ -538,7 +538,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len, params->params.num_channels = num_channels; params->params.num_probe_requests = probe_requests; - params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS); + params->params.tx_rate = cpu_to_le32(CONF_HW_BIT_RATE_2MBPS); params->params.tid_trigger = 0; params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h index 0219664..9143087 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.h +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h @@ -288,11 +288,6 @@ struct wl1271_cmd_ps_params { #define NUM_ACCESS_CATEGORIES_COPY 4 #define MAX_KEY_SIZE 32 -/* When set, disable HW encryption */ -#define DF_ENCRYPTION_DISABLE 0x01 -/* When set, disable HW decryption */ -#define DF_SNIFF_MODE_ENABLE 0x80 - enum wl1271_cmd_key_action { KEY_ADD_OR_REPLACE = 1, KEY_REMOVE = 2, diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h new file mode 100644 index 0000000..1d6a44b --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -0,0 +1,178 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL1271_CONF_H__ +#define __WL1271_CONF_H__ + +enum { + CONF_HW_BIT_RATE_1MBPS = BIT(0), + CONF_HW_BIT_RATE_2MBPS = BIT(1), + CONF_HW_BIT_RATE_5_5MBPS = BIT(2), + CONF_HW_BIT_RATE_6MBPS = BIT(3), + CONF_HW_BIT_RATE_9MBPS = BIT(4), + CONF_HW_BIT_RATE_11MBPS = BIT(5), + CONF_HW_BIT_RATE_12MBPS = BIT(6), + CONF_HW_BIT_RATE_18MBPS = BIT(7), + CONF_HW_BIT_RATE_22MBPS = BIT(8), + CONF_HW_BIT_RATE_24MBPS = BIT(9), + CONF_HW_BIT_RATE_36MBPS = BIT(10), + CONF_HW_BIT_RATE_48MBPS = BIT(11), + CONF_HW_BIT_RATE_54MBPS = BIT(12), + CONF_HW_BIT_RATE_MCS_0 = BIT(13), + CONF_HW_BIT_RATE_MCS_1 = BIT(14), + CONF_HW_BIT_RATE_MCS_2 = BIT(15), + CONF_HW_BIT_RATE_MCS_3 = BIT(16), + CONF_HW_BIT_RATE_MCS_4 = BIT(17), + CONF_HW_BIT_RATE_MCS_5 = BIT(18), + CONF_HW_BIT_RATE_MCS_6 = BIT(19), + CONF_HW_BIT_RATE_MCS_7 = BIT(20) +}; + +enum { + CONF_HW_RATE_INDEX_1MBPS = 0, + CONF_HW_RATE_INDEX_2MBPS = 1, + CONF_HW_RATE_INDEX_5_5MBPS = 2, + CONF_HW_RATE_INDEX_6MBPS = 3, + CONF_HW_RATE_INDEX_9MBPS = 4, + CONF_HW_RATE_INDEX_11MBPS = 5, + CONF_HW_RATE_INDEX_12MBPS = 6, + CONF_HW_RATE_INDEX_18MBPS = 7, + CONF_HW_RATE_INDEX_22MBPS = 8, + CONF_HW_RATE_INDEX_24MBPS = 9, + CONF_HW_RATE_INDEX_36MBPS = 10, + CONF_HW_RATE_INDEX_48MBPS = 11, + CONF_HW_RATE_INDEX_54MBPS = 12, + CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, +}; + +struct conf_sg_settings { + /* + * Defines the PER threshold in PPM of the BT voice of which reaching + * this value will trigger raising the priority of the BT voice by + * the BT IP until next NFS sample interval time as defined in + * nfs_sample_interval. + * + * Unit: PER value in PPM (parts per million) + * #Error_packets / #Total_packets + + * Range: u32 + */ + u32 per_threshold; + + /* + * This value is an absolute time in micro-seconds to limit the + * maximum scan duration compensation while in SG + */ + u32 max_scan_compensation_time; + + /* Defines the PER threshold of the BT voice of which reaching this + * value will trigger raising the priority of the BT voice until next + * NFS sample interval time as defined in sample_interval. + * + * Unit: msec + * Range: 1-65000 + */ + u16 nfs_sample_interval; + + /* + * Defines the load ratio for the BT. + * The WLAN ratio is: 100 - load_ratio + * + * Unit: Percent + * Range: 0-100 + */ + u8 load_ratio; + + /* + * true - Co-ex is allowed to enter/exit P.S automatically and + * transparently to the host + * + * false - Co-ex is disallowed to enter/exit P.S and will trigger an + * event to the host to notify for the need to enter/exit P.S + * due to BT change state + * + */ + u8 auto_ps_mode; + + /* + * This parameter defines the compensation percentage of num of probe + * requests in case scan is initiated during BT voice/BT ACL + * guaranteed link. + * + * Unit: Percent + * Range: 0-255 (0 - No compensation) + */ + u8 probe_req_compensation; + + /* + * This parameter defines the compensation percentage of scan window + * size in case scan is initiated during BT voice/BT ACL Guaranteed + * link. + * + * Unit: Percent + * Range: 0-255 (0 - No compensation) + */ + u8 scan_window_compensation; + + /* + * Defines the antenna configuration. + * + * Range: 0 - Single Antenna; 1 - Dual Antenna + */ + u8 antenna_config; + + /* + * The percent out of the Max consecutive beacon miss roaming trigger + * which is the threshold for raising the priority of beacon + * reception. + * + * Range: 1-100 + * N = MaxConsecutiveBeaconMiss + * P = coexMaxConsecutiveBeaconMissPrecent + * Threshold = MIN( N-1, round(N * P / 100)) + */ + u8 beacon_miss_threshold; + + /* + * The RX rate threshold below which rate adaptation is assumed to be + * occurring at the AP which will raise priority for ACTIVE_RX and RX + * SP. + * + * Range: HW_BIT_RATE_* + */ + u32 rate_adaptation_threshold; + + /* + * The SNR above which the RX rate threshold indicating AP rate + * adaptation is valid + * + * Range: -128 - 127 + */ + s8 rate_adaptation_snr; +}; + +struct conf_drv_settings { + struct conf_sg_settings sg; +}; + +#endif diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index 821a775..69bc929 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -46,6 +46,39 @@ #include "wl1271_cmd.h" #include "wl1271_boot.h" +static void wl1271_conf_init(struct wl1271 *wl) +{ + struct conf_drv_settings conf = { + .sg = { + .per_threshold = 7500, + .max_scan_compensation_time = 120000, + .nfs_sample_interval = 400, + .load_ratio = 50, + .auto_ps_mode = 0, + .probe_req_compensation = 170, + .scan_window_compensation = 50, + .antenna_config = 0, + .beacon_miss_threshold = 60, + .rate_adaptation_threshold = CONF_HW_BIT_RATE_12MBPS, + .rate_adaptation_snr = 0 + } + }; + + /* + * This function applies the default configuration to the driver. This + * function is invoked upon driver load (spi probe.) + * + * The configuration is stored in a run-time structure in order to + * facilitate for run-time adjustment of any of the parameters. Making + * changes to the configuration structure will apply the new values on + * the next interface up (wl1271_op_start.) + */ + + /* apply driver default configuration */ + memcpy(&wl->conf, &conf, sizeof(conf)); +} + + static int wl1271_plt_init(struct wl1271 *wl) { int ret; @@ -1180,44 +1213,44 @@ out: /* can't be const, mac80211 writes to this */ static struct ieee80211_rate wl1271_rates[] = { { .bitrate = 10, - .hw_value = 0x1, - .hw_value_short = 0x1, }, + .hw_value = CONF_HW_BIT_RATE_1MBPS, + .hw_value_short = CONF_HW_BIT_RATE_1MBPS, }, { .bitrate = 20, - .hw_value = 0x2, - .hw_value_short = 0x2, + .hw_value = CONF_HW_BIT_RATE_2MBPS, + .hw_value_short = CONF_HW_BIT_RATE_2MBPS, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 55, - .hw_value = 0x4, - .hw_value_short = 0x4, + .hw_value = CONF_HW_BIT_RATE_5_5MBPS, + .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 110, - .hw_value = 0x20, - .hw_value_short = 0x20, + .hw_value = CONF_HW_BIT_RATE_11MBPS, + .hw_value_short = CONF_HW_BIT_RATE_11MBPS, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, { .bitrate = 60, - .hw_value = 0x8, - .hw_value_short = 0x8, }, + .hw_value = CONF_HW_BIT_RATE_6MBPS, + .hw_value_short = CONF_HW_BIT_RATE_6MBPS, }, { .bitrate = 90, - .hw_value = 0x10, - .hw_value_short = 0x10, }, + .hw_value = CONF_HW_BIT_RATE_9MBPS, + .hw_value_short = CONF_HW_BIT_RATE_9MBPS, }, { .bitrate = 120, - .hw_value = 0x40, - .hw_value_short = 0x40, }, + .hw_value = CONF_HW_BIT_RATE_12MBPS, + .hw_value_short = CONF_HW_BIT_RATE_12MBPS, }, { .bitrate = 180, - .hw_value = 0x80, - .hw_value_short = 0x80, }, + .hw_value = CONF_HW_BIT_RATE_18MBPS, + .hw_value_short = CONF_HW_BIT_RATE_18MBPS, }, { .bitrate = 240, - .hw_value = 0x200, - .hw_value_short = 0x200, }, + .hw_value = CONF_HW_BIT_RATE_24MBPS, + .hw_value_short = CONF_HW_BIT_RATE_24MBPS, }, { .bitrate = 360, - .hw_value = 0x400, - .hw_value_short = 0x400, }, + .hw_value = CONF_HW_BIT_RATE_36MBPS, + .hw_value_short = CONF_HW_BIT_RATE_36MBPS, }, { .bitrate = 480, - .hw_value = 0x800, - .hw_value_short = 0x800, }, + .hw_value = CONF_HW_BIT_RATE_48MBPS, + .hw_value_short = CONF_HW_BIT_RATE_48MBPS, }, { .bitrate = 540, - .hw_value = 0x1000, - .hw_value_short = 0x1000, }, + .hw_value = CONF_HW_BIT_RATE_54MBPS, + .hw_value_short = CONF_HW_BIT_RATE_54MBPS, }, }; /* can't be const, mac80211 writes to this */ @@ -1433,6 +1466,9 @@ static int __devinit wl1271_probe(struct spi_device *spi) } dev_set_drvdata(&wl1271_device.dev, wl); + /* Apply default driver configuration. */ + wl1271_conf_init(wl); + ret = wl1271_init_ieee80211(wl); if (ret) goto out_platform; diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/wl1271_reg.h index 6af87b5..1f23738 100644 --- a/drivers/net/wireless/wl12xx/wl1271_reg.h +++ b/drivers/net/wireless/wl12xx/wl1271_reg.h @@ -613,50 +613,6 @@ enum { MAX_RADIO_BANDS = 0xFF }; -enum { - NO_RATE = 0, - RATE_1MBPS = 0x0A, - RATE_2MBPS = 0x14, - RATE_5_5MBPS = 0x37, - RATE_6MBPS = 0x0B, - RATE_9MBPS = 0x0F, - RATE_11MBPS = 0x6E, - RATE_12MBPS = 0x0A, - RATE_18MBPS = 0x0E, - RATE_22MBPS = 0xDC, - RATE_24MBPS = 0x09, - RATE_36MBPS = 0x0D, - RATE_48MBPS = 0x08, - RATE_54MBPS = 0x0C -}; - -enum { - RATE_INDEX_1MBPS = 0, - RATE_INDEX_2MBPS = 1, - RATE_INDEX_5_5MBPS = 2, - RATE_INDEX_6MBPS = 3, - RATE_INDEX_9MBPS = 4, - RATE_INDEX_11MBPS = 5, - RATE_INDEX_12MBPS = 6, - RATE_INDEX_18MBPS = 7, - RATE_INDEX_22MBPS = 8, - RATE_INDEX_24MBPS = 9, - RATE_INDEX_36MBPS = 10, - RATE_INDEX_48MBPS = 11, - RATE_INDEX_54MBPS = 12, - RATE_INDEX_MAX = RATE_INDEX_54MBPS, - MAX_RATE_INDEX, - INVALID_RATE_INDEX = MAX_RATE_INDEX, - RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF -}; - -enum { - RATE_MASK_1MBPS = 0x1, - RATE_MASK_2MBPS = 0x2, - RATE_MASK_5_5MBPS = 0x4, - RATE_MASK_11MBPS = 0x20, -}; - #define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */ #define OFDM_RATE_BIT BIT(6) #define PBCC_RATE_BIT BIT(7) -- 1.5.6.5