Return-path: Received: from lo.gmane.org ([80.91.229.12]:58751 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753056AbZK2OB3 (ORCPT ); Sun, 29 Nov 2009 09:01:29 -0500 Received: from list by lo.gmane.org with local (Exim 4.50) id 1NEkLG-0003WH-RG for linux-wireless@vger.kernel.org; Sun, 29 Nov 2009 15:01:34 +0100 Received: from 85-127-91-18.dynamic.xdsl-line.inode.at ([85.127.91.18]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 29 Nov 2009 15:01:34 +0100 Received: from tim by 85-127-91-18.dynamic.xdsl-line.inode.at with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sun, 29 Nov 2009 15:01:34 +0100 To: linux-wireless@vger.kernel.org From: Tim Blechmann Subject: Re: rt61pci bug Date: Sun, 29 Nov 2009 15:01:02 +0100 Message-ID: <4B127E9E.1090008@klingt.org> References: <4AE43028.30703@klingt.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig4E94235E0AA08E8D965FD4C4" In-Reply-To: Sender: linux-wireless-owner@vger.kernel.org List-ID: This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig4E94235E0AA08E8D965FD4C4 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable On 11/04/2009 07:00 PM, Tim Blechmann wrote: >> running the rt61pci module on 2.6.31.5 works fine, but using the recen= t=20 >> linus/master (2.6.32-rc5) results in this: >=20 > same issue with 2.6.32-rc5 ... new bootlog with more debugging info > attached ... i was still able to reproduce this issue with 2.6.32-rc8 ... it would=20 be nice, if someone could have a look into this issue before 2.6.32 is=20 released ... dmesg from 2.6.32-rc8: [ 10.249098] rt61pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> = IRQ 16 [ 10.257182] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - NIC: 0x= ff80 [ 10.257184] phy0 -> rt61pci_validate_eeprom: EEPROM recovery - Led: 0x= e0ff [ 10.257187] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 030= 2, rf: 0003, rev: 0002561c. [ 10.351794] Registered led device: rt61pci-phy0::radio [ 10.351839] Registered led device: rt61pci-phy0::assoc [ 14.342046] rt61pci 0000:06:00.0: firmware: requesting rt2561.bin [ 14.395533] phy0 -> rt2x00lib_request_firmware: Info - Firmware detect= ed - version: 0.8. [ 14.421238] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - = CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. [ 14.421245] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - = CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. [ 14.421252] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - = CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. [ 14.421258] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - = CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. [ 273.404685] phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non= -free entry in the non-full queue 2. [ 273.404687] Please file bug report to http://rt2x00.serialmonkey.com. [ 282.143549] wlan0: no IPv6 routers present [ 357.304908] phy0 -> rt61pci_txdone: Warning - TX status report missed = for entry 2 [ 357.333806] phy0 -> rt61pci_txdone: Warning - TX status report missed = for entry 9 [ 360.172776] phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non= -free entry in the non-full queue 2. [ 360.172778] Please file bug report to http://rt2x00.serialmonkey.com. [ 360.172782] phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS= /CTS frame. [ 383.880010] No probe response from AP 00:24:fe:09:94:18 after 500ms, d= isconnecting. [ 383.880026] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - = CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. [ 383.880034] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - = CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. [ 383.880042] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - = CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. [ 383.880050] phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - = CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0. [ 385.220460] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 1) [ 385.421337] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 2) [ 385.621304] wlan0: direct probe to AP 00:24:fe:09:94:18 (try 3) [ 385.821264] wlan0: direct probe to AP 00:24:fe:09:94:18 timed out lspci -vvv: 06:00.0 Network controller: RaLink RT2561/RT61 rev B 802.11g Subsystem: D-Link System Inc Device 3c09 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step= ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dslow >TAbort- SERR-