Return-path: Received: from 128-177-27-249.ip.openhosting.com ([128.177.27.249]:59176 "EHLO jmalinen.user.openhosting.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752736AbZL2K7a (ORCPT ); Tue, 29 Dec 2009 05:59:30 -0500 Date: Tue, 29 Dec 2009 12:59:19 +0200 From: Jouni Malinen To: "John W. Linville" , Johannes Berg Cc: linux-wireless@vger.kernel.org, Jouni Malinen , Jouni Malinen Subject: [PATCH 1/3] mac80211: Select lowest rate based on basic rate set in AP mode Message-ID: <20091229105919.GB18493@jm.kir.nu> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-wireless-owner@vger.kernel.org List-ID: If the basic rate set is configured to not include the lowest rate (e.g., basic rate set = 6, 12, 24 Mbps in IEEE 802.11g mode), the AP should not send out broadcast frames at 1 Mbps. This type of configuration can be used to optimize channel usage in cases where there is no need for backwards compatibility with IEEE 802.11b-only devices. In AP mode, mac80211 was unconditionally using the lowest rate for Beacon frames and similarly, with all rate control algorithms that use rate_control_send_low(), the lowest rate ended up being used for all broadcast frames (and all unicast frames that are sent before association). Change this to take into account the basic rate configuration in AP mode, i.e., use the lowest rate in the basic rate set instead of the lowest supported rate when selecting the rate. Signed-off-by: Jouni Malinen --- include/net/mac80211.h | 2 ++ net/mac80211/rate.c | 25 +++++++++++++++++++++++++ net/mac80211/tx.c | 24 +++++++++++++----------- 3 files changed, 40 insertions(+), 11 deletions(-) --- wireless-testing.orig/net/mac80211/rate.c 2009-12-29 10:49:34.000000000 +0200 +++ wireless-testing/net/mac80211/rate.c 2009-12-29 10:53:59.000000000 +0200 @@ -207,6 +207,27 @@ static bool rc_no_data_or_no_ack(struct return ((info->flags & IEEE80211_TX_CTL_NO_ACK) || !ieee80211_is_data(fc)); } +static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u8 max_rate_idx) +{ + u8 i; + + if (basic_rates == 0) + return; /* assume basic rates unknown and accept rate */ + if (*idx < 0) + return; + if (basic_rates & (1 << *idx)) + return; /* selected rate is a basic rate */ + + for (i = *idx + 1; i <= max_rate_idx; i++) { + if (basic_rates & (1 << i)) { + *idx = i; + return; + } + } + + /* could not find a basic rate; use original selection */ +} + bool rate_control_send_low(struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_rate_control *txrc) @@ -218,6 +239,10 @@ bool rate_control_send_low(struct ieee80 info->control.rates[0].count = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 1 : txrc->hw->max_rate_tries; + if (!sta && txrc->ap) + rc_send_low_broadcast(&info->control.rates[0].idx, + txrc->bss_conf->basic_rates, + txrc->sband->n_bitrates); return true; } return false; --- wireless-testing.orig/net/mac80211/tx.c 2009-12-29 10:50:57.000000000 +0200 +++ wireless-testing/net/mac80211/tx.c 2009-12-29 10:53:59.000000000 +0200 @@ -520,6 +520,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021 txrc.skb = tx->skb; txrc.reported_rate.idx = -1; txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx; + txrc.ap = tx->sdata->vif.type == NL80211_IFTYPE_AP; /* set up RTS protection if desired */ if (len > tx->local->hw.wiphy->rts_threshold) { @@ -2060,6 +2061,7 @@ struct sk_buff *ieee80211_beacon_get_tim struct beacon_data *beacon; struct ieee80211_supported_band *sband; enum ieee80211_band band = local->hw.conf.channel->band; + struct ieee80211_tx_rate_control txrc; sband = local->hw.wiphy->bands[band]; @@ -2167,21 +2169,21 @@ struct sk_buff *ieee80211_beacon_get_tim info = IEEE80211_SKB_CB(skb); info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + info->flags |= IEEE80211_TX_CTL_NO_ACK; info->band = band; - /* - * XXX: For now, always use the lowest rate - */ - info->control.rates[0].idx = 0; - info->control.rates[0].count = 1; - info->control.rates[1].idx = -1; - info->control.rates[2].idx = -1; - info->control.rates[3].idx = -1; - info->control.rates[4].idx = -1; - BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); + + memset(&txrc, 0, sizeof(txrc)); + txrc.hw = hw; + txrc.sband = sband; + txrc.bss_conf = &sdata->vif.bss_conf; + txrc.skb = skb; + txrc.reported_rate.idx = -1; + txrc.max_rate_idx = sdata->max_ratectrl_rateidx; + txrc.ap = true; + rate_control_get_rate(sdata, NULL, &txrc); info->control.vif = vif; - info->flags |= IEEE80211_TX_CTL_NO_ACK; info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; out: --- wireless-testing.orig/include/net/mac80211.h 2009-12-29 10:50:57.000000000 +0200 +++ wireless-testing/include/net/mac80211.h 2009-12-29 10:53:59.000000000 +0200 @@ -2294,6 +2294,7 @@ enum rate_control_changed { * @max_rate_idx: user-requested maximum rate (not MCS for now) * @skb: the skb that will be transmitted, the control information in it needs * to be filled in + * @ap: whether this frame is sent out in AP mode */ struct ieee80211_tx_rate_control { struct ieee80211_hw *hw; @@ -2303,6 +2304,7 @@ struct ieee80211_tx_rate_control { struct ieee80211_tx_rate reported_rate; bool rts, short_preamble; u8 max_rate_idx; + bool ap; }; struct rate_control_ops { -- -- Jouni Malinen PGP id EFC895FA