Return-path: Received: from mail-pw0-f42.google.com ([209.85.160.42]:48955 "EHLO mail-pw0-f42.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754446Ab0A1Pha (ORCPT ); Thu, 28 Jan 2010 10:37:30 -0500 Received: by pwi21 with SMTP id 21so550163pwi.21 for ; Thu, 28 Jan 2010 07:37:29 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <201001281528.37342.holgerschurig@gmail.com> References: <8bf247761001280439u59a9b6ch1128d42a83116594@mail.gmail.com> <8bf247761001280607i2b90f73j96e3afd02fb6da29@mail.gmail.com> <201001281528.37342.holgerschurig@gmail.com> Date: Thu, 28 Jan 2010 21:07:29 +0530 Message-ID: <8bf247761001280737v135c8fbfj7a5e1b7eea881d5c@mail.gmail.com> Subject: Re: scan does not work From: Sriram V To: linux-wireless@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi, How do i check if the communication between the host and libertas is proper? Is there any way i can do it? Sometimes, i find that the loading of firmware fails with -110 (timeout) return value. what i do is rmmod the driver and do a insmod again and it works!. Regards, sriram On Thu, Jan 28, 2010 at 7:58 PM, Holger Schurig wrote: >> libertas cmd: DNLD_CMD: command 0x0006, seq 9, size 63 > > That is the scan command. > >> libertas cmd: CMD_RESP: response 0x8006, seq 9, size 11 > > And that the scan response. As I can see from the size (11 > bytes), it doesn't contain any results. The same happens with > the other scan-responses: > >> libertas cmd: CMD_RESP: response 0x8006, seq 10, size 11 >> libertas cmd: CMD_RESP: response 0x8006, seq 11, size 11 >> libertas cmd: CMD_RESP: response 0x8006, seq 12, size 11 >> libertas cmd: CMD_RESP: response 0x8006, seq 13, size 11 >> libertas cmd: CMD_RESP: response 0x8006, seq 14, size 11 > > I'd suggest you check your antenna. > > -- > http://www.holgerschurig.de >