Return-path: Received: from smtp.nokia.com ([192.100.122.230]:24694 "EHLO mgw-mx03.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754050Ab0BRL2N (ORCPT ); Thu, 18 Feb 2010 06:28:13 -0500 From: Juuso Oikarinen To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, Luciano Coelho Subject: [PATCH 09/22] wl1271: add most of the normal initialization commands to PLT mode Date: Thu, 18 Feb 2010 13:25:44 +0200 Message-Id: <1266492357-462-10-git-send-email-juuso.oikarinen@nokia.com> In-Reply-To: <1266492357-462-1-git-send-email-juuso.oikarinen@nokia.com> References: <1266492357-462-1-git-send-email-juuso.oikarinen@nokia.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Luciano Coelho We need to configure PLT mode almost in the same way as normal mode. Most of the configuration functions need to be called also when entering PLT, with the exception of a few RX and TX configuration (which cause mac80211 warnings if enable while runnning PLT tests). Signed-off-by: Luciano Coelho Reviewed-by: Juuso Oikarinen Signed-off-by: Juuso Oikarinen --- drivers/net/wireless/wl12xx/wl1271_init.c | 8 ++-- drivers/net/wireless/wl12xx/wl1271_init.h | 4 ++ drivers/net/wireless/wl12xx/wl1271_main.c | 85 ++++++++++++++++++++++++++--- 3 files changed, 86 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c index 78403da..86c30a8 100644 --- a/drivers/net/wireless/wl12xx/wl1271_init.c +++ b/drivers/net/wireless/wl12xx/wl1271_init.c @@ -49,7 +49,7 @@ static int wl1271_init_hwenc_config(struct wl1271 *wl) return 0; } -static int wl1271_init_templates_config(struct wl1271 *wl) +int wl1271_init_templates_config(struct wl1271 *wl) { int ret; @@ -113,7 +113,7 @@ static int wl1271_init_rx_config(struct wl1271 *wl, u32 config, u32 filter) return 0; } -static int wl1271_init_phy_config(struct wl1271 *wl) +int wl1271_init_phy_config(struct wl1271 *wl) { int ret; @@ -156,7 +156,7 @@ static int wl1271_init_beacon_filter(struct wl1271 *wl) return 0; } -static int wl1271_init_pta(struct wl1271 *wl) +int wl1271_init_pta(struct wl1271 *wl) { int ret; @@ -171,7 +171,7 @@ static int wl1271_init_pta(struct wl1271 *wl) return 0; } -static int wl1271_init_energy_detection(struct wl1271 *wl) +int wl1271_init_energy_detection(struct wl1271 *wl) { int ret; diff --git a/drivers/net/wireless/wl12xx/wl1271_init.h b/drivers/net/wireless/wl12xx/wl1271_init.h index 930677f..bc26f8c 100644 --- a/drivers/net/wireless/wl12xx/wl1271_init.h +++ b/drivers/net/wireless/wl12xx/wl1271_init.h @@ -27,6 +27,10 @@ #include "wl1271.h" int wl1271_hw_init_power_auth(struct wl1271 *wl); +int wl1271_init_templates_config(struct wl1271 *wl); +int wl1271_init_phy_config(struct wl1271 *wl); +int wl1271_init_pta(struct wl1271 *wl); +int wl1271_init_energy_detection(struct wl1271 *wl); int wl1271_hw_init(struct wl1271 *wl); #endif diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index b5d53a3..e698dec 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -265,7 +265,9 @@ static void wl1271_conf_init(struct wl1271 *wl) static int wl1271_plt_init(struct wl1271 *wl) { - int ret; + struct conf_tx_ac_category *conf_ac; + struct conf_tx_tid *conf_tid; + int ret, i; ret = wl1271_cmd_general_parms(wl); if (ret < 0) @@ -275,15 +277,89 @@ static int wl1271_plt_init(struct wl1271 *wl) if (ret < 0) return ret; + ret = wl1271_init_templates_config(wl); + if (ret < 0) + return ret; + ret = wl1271_acx_init_mem_config(wl); if (ret < 0) return ret; + /* PHY layer config */ + ret = wl1271_init_phy_config(wl); + if (ret < 0) + goto out_free_memmap; + + ret = wl1271_acx_dco_itrim_params(wl); + if (ret < 0) + goto out_free_memmap; + + /* Initialize connection monitoring thresholds */ + ret = wl1271_acx_conn_monit_params(wl); + if (ret < 0) + goto out_free_memmap; + + /* Bluetooth WLAN coexistence */ + ret = wl1271_init_pta(wl); + if (ret < 0) + goto out_free_memmap; + + /* Energy detection */ + ret = wl1271_init_energy_detection(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default fragmentation threshold */ + ret = wl1271_acx_frag_threshold(wl); + if (ret < 0) + goto out_free_memmap; + + /* Default TID configuration */ + for (i = 0; i < wl->conf.tx.tid_conf_count; i++) { + conf_tid = &wl->conf.tx.tid_conf[i]; + ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id, + conf_tid->channel_type, + conf_tid->tsid, + conf_tid->ps_scheme, + conf_tid->ack_policy, + conf_tid->apsd_conf[0], + conf_tid->apsd_conf[1]); + if (ret < 0) + goto out_free_memmap; + } + + /* Default AC configuration */ + for (i = 0; i < wl->conf.tx.ac_conf_count; i++) { + conf_ac = &wl->conf.tx.ac_conf[i]; + ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min, + conf_ac->cw_max, conf_ac->aifsn, + conf_ac->tx_op_limit); + if (ret < 0) + goto out_free_memmap; + } + + /* Enable data path */ ret = wl1271_cmd_data_path(wl, 1); if (ret < 0) - return ret; + goto out_free_memmap; + + /* Configure for CAM power saving (ie. always active) */ + ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); + if (ret < 0) + goto out_free_memmap; + + /* configure PM */ + ret = wl1271_acx_pm_config(wl); + if (ret < 0) + goto out_free_memmap; return 0; + + out_free_memmap: + kfree(wl->target_mem_map); + wl->target_mem_map = NULL; + + return ret; } static void wl1271_disable_interrupts(struct wl1271 *wl) @@ -653,11 +729,6 @@ int wl1271_plt_start(struct wl1271 *wl) if (ret < 0) goto irq_disable; - /* Make sure power saving is disabled */ - ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); - if (ret < 0) - goto irq_disable; - wl->state = WL1271_STATE_PLT; wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver); -- 1.6.3.3