Return-path: Received: from smtp.nokia.com ([192.100.122.230]:19853 "EHLO mgw-mx03.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751556Ab0BQP63 (ORCPT ); Wed, 17 Feb 2010 10:58:29 -0500 Received: from vaebh106.NOE.Nokia.com (vaebh106.europe.nokia.com [10.160.244.32]) by mgw-mx03.nokia.com (Switch-3.3.3/Switch-3.3.3) with ESMTP id o1HFwJDj023045 for ; Wed, 17 Feb 2010 17:58:26 +0200 Received: from [127.0.1.1] (essapo-nirac253144.europe.nokia.com [10.162.253.144]) by mgw-da02.ext.nokia.com (Switch-3.3.3/Switch-3.3.3) with ESMTP id o1HFwCwr009071 for ; Wed, 17 Feb 2010 17:58:12 +0200 Subject: [PATCH v2] nl80211: add power save commands To: linux-wireless@vger.kernel.org From: Kalle Valo Date: Wed, 17 Feb 2010 17:58:10 +0200 Message-ID: <20100217155810.4534.69338.stgit@tikku> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Kalle Valo The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo --- include/linux/nl80211.h | 10 +++ include/net/cfg80211.h | 7 +- net/wireless/core.c | 16 +++-- net/wireless/nl80211.c | 131 ++++++++++++++++++++++++++++++++++++++++++++ net/wireless/wext-compat.c | 10 ++- 5 files changed, 159 insertions(+), 15 deletions(-) diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 8e6384f..28ba20f 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -416,6 +416,9 @@ enum nl80211_commands { NL80211_CMD_ACTION, NL80211_CMD_ACTION_TX_STATUS, + NL80211_CMD_SET_POWER_SAVE, + NL80211_CMD_GET_POWER_SAVE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -837,6 +840,8 @@ enum nl80211_attrs { NL80211_ATTR_ACK, + NL80211_ATTR_PS_STATE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1573,4 +1578,9 @@ enum nl80211_band { NL80211_BAND_5GHZ, }; +enum nl80211_ps_state { + NL80211_PS_DISABLED, + NL80211_PS_ENABLED, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7188934..3d134a1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1150,7 +1150,6 @@ struct cfg80211_ops { enum nl80211_channel_type channel_type, const u8 *buf, size_t len, u64 *cookie); - /* some temporary stuff to finish wext */ int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, bool enabled, int timeout); }; @@ -1489,6 +1488,9 @@ struct wireless_dev { struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; struct cfg80211_internal_bss *current_bss; /* associated / joined */ + bool ps; + int ps_timeout; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -1500,8 +1502,7 @@ struct wireless_dev { u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; s8 default_key, default_mgmt_key; - bool ps, prev_bssid_valid; - int ps_timeout; + bool prev_bssid_valid; } wext; #endif }; diff --git a/net/wireless/core.c b/net/wireless/core.c index 51908dc..7fdb940 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -698,19 +698,21 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, wdev->wext.default_key = -1; wdev->wext.default_mgmt_key = -1; wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC; +#endif + if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT) - wdev->wext.ps = true; + wdev->ps = true; else - wdev->wext.ps = false; - wdev->wext.ps_timeout = 100; + wdev->ps = false; + wdev->ps_timeout = 100; if (rdev->ops->set_power_mgmt) if (rdev->ops->set_power_mgmt(wdev->wiphy, dev, - wdev->wext.ps, - wdev->wext.ps_timeout)) { + wdev->ps, + wdev->ps_timeout)) { /* assume this means it's off */ - wdev->wext.ps = false; + wdev->ps = false; } -#endif + if (!dev->ethtool_ops) dev->ethtool_ops = &cfg80211_ethtool_ops; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 3281120..b0495a1 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -148,6 +148,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = { [NL80211_ATTR_FRAME] = { .type = NLA_BINARY, .len = IEEE80211_MAX_DATA_LEN }, [NL80211_ATTR_FRAME_MATCH] = { .type = NLA_BINARY, }, + [NL80211_ATTR_PS_STATE] = { .type = NLA_U32 }, }; /* policy for the attributes */ @@ -4663,6 +4664,124 @@ unlock_rtnl: return err; } +static int nl80211_set_power_save(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev; + struct wireless_dev *wdev; + struct net_device *dev; + u8 ps_state; + bool state; + int err; + + if (!info->attrs[NL80211_ATTR_PS_STATE]) { + err = -EINVAL; + goto out; + } + + ps_state = nla_get_u32(info->attrs[NL80211_ATTR_PS_STATE]); + + if (ps_state != NL80211_PS_DISABLED && ps_state != NL80211_PS_ENABLED) { + err = -EINVAL; + goto out; + } + + rtnl_lock(); + + err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev); + if (err) + goto unlock_rdev; + + wdev = dev->ieee80211_ptr; + + if (!rdev->ops->set_power_mgmt) { + err = -EOPNOTSUPP; + goto unlock_rdev; + } + + state = (ps_state == NL80211_PS_ENABLED) ? true : false; + + if (state == wdev->ps) + goto unlock_rdev; + + wdev->ps = state; + + if (rdev->ops->set_power_mgmt(wdev->wiphy, dev, wdev->ps, + wdev->ps_timeout)) + /* assume this means it's off */ + wdev->ps = false; + +unlock_rdev: + cfg80211_unlock_rdev(rdev); + dev_put(dev); + rtnl_unlock(); + +out: + return err; +} + +static int nl80211_get_power_save(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev; + enum nl80211_ps_state ps_state; + struct wireless_dev *wdev; + struct net_device *dev; + struct sk_buff *msg; + void *hdr; + int err; + + rtnl_lock(); + + err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev); + if (err) + goto unlock_rtnl; + + wdev = dev->ieee80211_ptr; + + if (!rdev->ops->set_power_mgmt) { + err = -EOPNOTSUPP; + goto out; + } + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto out; + } + + hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0, + NL80211_CMD_GET_POWER_SAVE); + if (!hdr) { + err = -ENOMEM; + goto free_msg; + } + + if (wdev->ps) + ps_state = NL80211_PS_ENABLED; + else + ps_state = NL80211_PS_DISABLED; + + NLA_PUT_U32(msg, NL80211_ATTR_PS_STATE, ps_state); + + genlmsg_end(msg, hdr); + err = genlmsg_reply(msg, info); + goto out; + +nla_put_failure: + err = -ENOBUFS; + +free_msg: + nlmsg_free(msg); + +out: + cfg80211_unlock_rdev(rdev); + dev_put(dev); + +unlock_rtnl: + rtnl_unlock(); + + return err; +} + static struct genl_ops nl80211_ops[] = { { .cmd = NL80211_CMD_GET_WIPHY, @@ -4955,6 +5074,18 @@ static struct genl_ops nl80211_ops[] = { .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, }, + { + .cmd = NL80211_CMD_SET_POWER_SAVE, + .doit = nl80211_set_power_save, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + }, + { + .cmd = NL80211_CMD_GET_POWER_SAVE, + .doit = nl80211_get_power_save, + .policy = nl80211_policy, + /* can be retrieved by unprivileged users */ + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index b17eeae..9ab5183 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -1099,8 +1099,8 @@ int cfg80211_wext_siwpower(struct net_device *dev, { struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); - bool ps = wdev->wext.ps; - int timeout = wdev->wext.ps_timeout; + bool ps = wdev->ps; + int timeout = wdev->ps_timeout; int err; if (wdev->iftype != NL80211_IFTYPE_STATION) @@ -1133,8 +1133,8 @@ int cfg80211_wext_siwpower(struct net_device *dev, if (err) return err; - wdev->wext.ps = ps; - wdev->wext.ps_timeout = timeout; + wdev->ps = ps; + wdev->ps_timeout = timeout; return 0; @@ -1147,7 +1147,7 @@ int cfg80211_wext_giwpower(struct net_device *dev, { struct wireless_dev *wdev = dev->ieee80211_ptr; - wrq->disabled = !wdev->wext.ps; + wrq->disabled = !wdev->ps; return 0; }