Return-path: Received: from smtp.nokia.com ([192.100.105.134]:19758 "EHLO mgw-mx09.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753965Ab0CQNE6 (ORCPT ); Wed, 17 Mar 2010 09:04:58 -0400 Received: from vaebh105.NOE.Nokia.com (vaebh105.europe.nokia.com [10.160.244.31]) by mgw-mx09.nokia.com (Switch-3.3.3/Switch-3.3.3) with ESMTP id o2HD40iv015615 for ; Wed, 17 Mar 2010 08:04:57 -0500 Received: from localhost.localdomain (wimaxnb.nmp.nokia.com [172.22.211.32]) by mgw-sa02.ext.nokia.com (Switch-3.3.3/Switch-3.3.3) with ESMTP id o2HD42g4030104 for ; Wed, 17 Mar 2010 15:04:05 +0200 From: Juuso Oikarinen To: linux-wireless@vger.kernel.org Subject: [RFC PATCHv3 2/2] mac80211: Add support for connection quality monitoring Date: Wed, 17 Mar 2010 15:01:17 +0200 Message-Id: <1268830877-5162-3-git-send-email-juuso.oikarinen@nokia.com> In-Reply-To: <1268830877-5162-1-git-send-email-juuso.oikarinen@nokia.com> References: <1268830877-5162-1-git-send-email-juuso.oikarinen@nokia.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Add support for the set_cqm_config op. This op function configures the requested connection quality monitor rssi threshold and rssi hysteresis values to the hardware if the hardware supports IEEE80211_HW_SUPPORTS_CQM. For unsupporting hardware, currently -EOPNOTSUPP is returned, so the mac80211 is currently not doing connection quality monitoring on the host. This could be added later, if needed. Signed-off-by: Juuso Oikarinen --- include/net/mac80211.h | 27 +++++++++++++++++++++++++++ net/mac80211/cfg.c | 26 ++++++++++++++++++++++++++ net/mac80211/mlme.c | 9 +++++++++ 3 files changed, 62 insertions(+), 0 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 936bc41..90da396 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -599,6 +599,7 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed + * @IEEE80211_CONF_CHANGE_CQM: Connection quality monitor config changed */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_SMPS = BIT(1), @@ -609,6 +610,7 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), IEEE80211_CONF_CHANGE_IDLE = BIT(8), + IEEE80211_CONF_CHANGE_CQM = BIT(9), }; /** @@ -662,6 +664,9 @@ enum ieee80211_smps_mode { * frame, called "dot11ShortRetryLimit" in 802.11, but actually means the * number of transmissions not the number of retries * + * @cqm_rssi_thold: Connection quality monitor RSSI threshold + * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis + * * @smps_mode: spatial multiplexing powersave mode; note that * %IEEE80211_SMPS_STATIC is used when the device is not * configured for an HT channel @@ -676,6 +681,9 @@ struct ieee80211_conf { u8 long_frame_max_tx_count, short_frame_max_tx_count; + s32 cqm_rssi_thold; + u8 cqm_rssi_hyst; + struct ieee80211_channel *channel; enum nl80211_channel_type channel_type; enum ieee80211_smps_mode smps_mode; @@ -954,6 +962,10 @@ enum ieee80211_tkip_key_type { * Hardware can provide ack status reports of Tx frames to * the stack. * + * @IEEE80211_HW_SUPPORTS_CQM: + * Hardware can do connection quality monitoring - i.e. it can monitor + * RSSI levels and notify on changes based on a threshold and hysteresis. + * */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -975,6 +987,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, + IEEE80211_HW_SUPPORTS_CQM = 1<<19, }; /** @@ -2370,6 +2383,20 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw, */ void ieee80211_beacon_loss(struct ieee80211_vif *vif); +/** + * ieee80211_cqm_notify - inform connection quality monitoring RSSI + * threshold triggered + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @rssi_state: the current state of the RSSI value compared to threshold + * + * When the IEEE80211_HW_SUPPORTS_CQM is set, and a RSSI threshold has been + * configured, the driver will inform whenever RSSI goes above or below + * the threshold with this function. + */ +void ieee80211_cqm_notify(struct ieee80211_vif *vif, + enum nl80211_cqm_state rssi_state); + /* Rate control API */ /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index b7116ef..319a604 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1402,6 +1402,31 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, return 0; } +static int ieee80211_set_cqm_config(struct wiphy *wiphy, + struct net_device *dev, + s32 rssi_thold, u8 rssi_hyst) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_conf *conf = &local->hw.conf; + + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return -EOPNOTSUPP; + + if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM)) + return -EOPNOTSUPP; + + if (rssi_thold == conf->cqm_rssi_thold && + rssi_hyst == conf->cqm_rssi_hyst) + return 0; + + conf->cqm_rssi_thold = rssi_thold; + conf->cqm_rssi_hyst = rssi_hyst; + + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CQM); + return 0; +} + static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, struct net_device *dev, const u8 *addr, @@ -1506,4 +1531,5 @@ struct cfg80211_ops mac80211_config_ops = { .remain_on_channel = ieee80211_remain_on_channel, .cancel_remain_on_channel = ieee80211_cancel_remain_on_channel, .action = ieee80211_action, + .set_cqm_config = ieee80211_set_cqm_config }; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index be5f723..3ee3250 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2135,3 +2135,12 @@ int ieee80211_mgd_action(struct ieee80211_sub_if_data *sdata, *cookie = (unsigned long) skb; return 0; } + +void ieee80211_cqm_notify(struct ieee80211_vif *vif, + enum nl80211_cqm_state rssi_state) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + cfg80211_cqm_notify(sdata->dev, rssi_state, GFP_KERNEL); +} +EXPORT_SYMBOL(ieee80211_cqm_notify); -- 1.6.3.3