Return-path: Received: from mail30s.wh2.ocn.ne.jp ([125.206.180.198]:5287 "HELO mail30s.wh2.ocn.ne.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753862Ab0FYAtL (ORCPT ); Thu, 24 Jun 2010 20:49:11 -0400 Received: from vs3013.wh2.ocn.ne.jp (125.206.180.245) by mail30s.wh2.ocn.ne.jp (RS ver 1.0.95vs) with SMTP id 0-0931866946 for ; Fri, 25 Jun 2010 09:49:07 +0900 (JST) From: Bruno Randolf To: "Jaroslav Fojtik" Subject: Re: ATH5k - Signal measurement reports wrong values - "calib" did not help Date: Fri, 25 Jun 2010 09:47:38 +0900 Cc: linux-wireless@vger.kernel.org References: <4C1E6A13.4259.24AF3C@jafojtik.seznam.cz> <201006211650.50766.br1@einfach.org> <4C21CDD7.22303.238050@jafojtik.seznam.cz> In-Reply-To: <4C21CDD7.22303.238050@jafojtik.seznam.cz> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Message-Id: <201006250947.39223.br1@einfach.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Wed June 23 2010 18:03:19 Jaroslav Fojtik wrote: > Dear Bruno & ATH5k developpers, > > > > > it might be interresting to see what results you get from noise > > > > calibration. you can enable calibration debugging with "echo calib > > > > > /sys/kernel/debug/ath5k/phy0/debug" > > Nothing changed after setting "calib" on. > > ATH5k still reports bad values. > > You could see a magenta line here: > http://78.108.103.11:11080/cgi-bin/rodga.cgi > > regards > Jara hey jara! setting "calib" is not supposed to change the results, it would just show us debug messages in the kernel log (dmesg). have you tried the patch i sent later? that should fix it... bruno