Return-path: Received: from shadbolt.e.decadent.org.uk ([88.96.1.126]:46273 "EHLO shadbolt.e.decadent.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754194Ab0GKW0n (ORCPT ); Sun, 11 Jul 2010 18:26:43 -0400 From: Ben Hutchings To: Michael Buesch , Stefano Brivio , linux-wireless@vger.kernel.org Cc: Simon Richter , 588196@bugs.debian.org In-Reply-To: <20100706021937.11147.78230.reportbug@debian.hogyros.de> References: <20100706021937.11147.78230.reportbug@debian.hogyros.de> Content-Type: multipart/signed; micalg="pgp-sha1"; protocol="application/pgp-signature"; boundary="=-oAz7tPAmPn/chOM8NC1P" Date: Sun, 11 Jul 2010 23:25:48 +0100 Message-ID: <1278887148.6139.91.camel@localhost> Mime-Version: 1.0 Subject: Re: Bug#588196: b43: does not join multicast groups Sender: linux-wireless-owner@vger.kernel.org List-ID: --=-oAz7tPAmPn/chOM8NC1P Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable On Tue, 2010-07-06 at 04:19 +0200, Simon Richter wrote: > Package: linux-2.6 > Version: 2.6.34-1~experimental.1 > Severity: normal >=20 > Hi, >=20 > I'm using a B43 based SSB card with LP-PHY, and find myself unable to > join an IPv6 network as router advertisements are never seen on my > system. ping6 using link-local addresses works fine. >=20 > The issue persists even if I enable promiscuous mode. I don't see any changes after 2.6.34 that might address this; therefore I'm forwarding this upstream. Ben. > Simon >=20 > -- Package-specific info: > ** Version: > Linux version 2.6.34-1-686 (Debian 2.6.34-1~experimental.1) (maks@debian.= org) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 SMP Thu May 20 12:14:21 UTC = 2010 >=20 > ** Command line: > root=3DUUID=3D67d4bec9-8770-46d3-b483-a53af24245f9 ro quiet >=20 > ** Not tainted >=20 > ** Kernel log: > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.34-1-686 (Debian 2.6.34-1~experimental.1= ) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 SMP Thu May 2= 0 12:14:21 UTC 2010 > [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommend= ed > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable) > [ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data= ) > [ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved) > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) > [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled:= non-PAE kernel! > [ 0.000000] DMI present. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (us= able) =3D=3D> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (us= able) > [ 0.000000] last_pfn =3D 0x3f6d0 max_arch_pfn =3D 0x100000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CFFFF write-protect > [ 0.000000] D0000-DFFFF uncachable > [ 0.000000] E0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask 0C0000000 write-back > [ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable > [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable > [ 0.000000] 3 disabled > [ 0.000000] 4 disabled > [ 0.000000] 5 disabled > [ 0.000000] 6 disabled > [ 0.000000] 7 disabled > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600= 070106 > [ 0.000000] initial memory mapped : 0 - 01800000 > [ 0.000000] found SMP MP-table at [c00f7fa0] f7fa0 > [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 > [ 0.000000] 0000000000 - 00377fe000 page 4k > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 100000-1e100= 0 > [ 0.000000] RAMDISK: 37903000 - 37ff0000 > [ 0.000000] Allocated new RAMDISK: 001d8000 - 008c4269 > [ 0.000000] Move RAMDISK from 0000000037903000 - 0000000037fef268 to 0= 01d8000 - 008c4268 > [ 0.000000] ACPI: RSDP 000f7f70 00024 (v02 PTLTD ) > [ 0.000000] ACPI: XSDT 3f6dc066 0006C (v01 PTLTD ? XSDT 06040000 L= TP 00000000) > [ 0.000000] ACPI: FACP 3f6e1d48 000F4 (v03 INTEL CALISTGA 06040000 AL= AN 00000001) > [ 0.000000] ACPI: DSDT 3f6dcf4b 04D89 (v01 INTEL CALISTGA 06040000 IN= TL 20050624) > [ 0.000000] ACPI: FACS 3f6e2fc0 00040 > [ 0.000000] ACPI: APIC 3f6e1e3c 00068 (v01 INTEL CALISTGA 06040000 LO= HR 0000005A) > [ 0.000000] ACPI: HPET 3f6e1ea4 00038 (v01 INTEL CALISTGA 06040000 LO= HR 0000005A) > [ 0.000000] ACPI: MCFG 3f6e1edc 0003C (v01 INTEL CALISTGA 06040000 LO= HR 0000005A) > [ 0.000000] ACPI: TCPA 3f6e1f18 00032 (v01 PTLTD CALISTGA 06040000 P= TL 00000001) > [ 0.000000] ACPI: TMOR 3f6e1f4a 00026 (v01 PTLTD 06040000 PT= L 00000003) > [ 0.000000] ACPI: APIC 3f6e1f70 00068 (v01 PTLTD ? APIC 06040000 L= TP 00000000) > [ 0.000000] ACPI: BOOT 3f6e1fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 L= TP 00000001) > [ 0.000000] ACPI: SSDT 3f6dc0d2 004F6 (v02 PmRef CpuPm 00003000 IN= TL 20050624) > [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 > [ 0.000000] ACPI: If "acpi_apic_instance=3D2" works better, notify lin= ux-acpi@vger.kernel.org > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 126MB HIGHMEM available. > [ 0.000000] 887MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 377fe000 > [ 0.000000] low ram: 0 - 377fe000 > [ 0.000000] node 0 low ram: 00000000 - 377fe000 > [ 0.000000] node 0 bootmap 00007000 - 0000df00 > [ 0.000000] (13/32 early reservations) =3D=3D> bootmem [0000000000 - 0= 0377fe000] > [ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE =3D=3D> [0= 000001000 - 0000002000] > [ 0.000000] #1 [0001000000 - 00014cf9c4] TEXT DATA BSS =3D=3D> [0= 001000000 - 00014cf9c4] > [ 0.000000] #2 [00014d0000 - 00014d6124] BRK =3D=3D> [0= 0014d0000 - 00014d6124] > [ 0.000000] #3 [00000f7fb0 - 0000100000] BIOS reserved =3D=3D> [0= 0000f7fb0 - 0000100000] > [ 0.000000] #4 [00000f7fa0 - 00000f7fb0] MP-table mpf =3D=3D> [0= 0000f7fa0 - 00000f7fb0] > [ 0.000000] #5 [000009f800 - 000009fc71] BIOS reserved =3D=3D> [0= 00009f800 - 000009fc71] > [ 0.000000] #6 [000009fdd1 - 00000f7fa0] BIOS reserved =3D=3D> [0= 00009fdd1 - 00000f7fa0] > [ 0.000000] #7 [000009fc71 - 000009fdd1] MP-table mpc =3D=3D> [0= 00009fc71 - 000009fdd1] > [ 0.000000] #8 [0000002000 - 0000003000] TRAMPOLINE =3D=3D> [0= 000002000 - 0000003000] > [ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP =3D=3D> [0= 000003000 - 0000007000] > [ 0.000000] #10 [0000100000 - 00001d8000] PGTABLE =3D=3D> [= 0000100000 - 00001d8000] > [ 0.000000] #11 [00001d8000 - 00008c5000] NEW RAMDISK =3D=3D> [= 00001d8000 - 00008c5000] > [ 0.000000] #12 [0000007000 - 000000e000] BOOTMAP =3D=3D> [= 0000007000 - 000000e000] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000001 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000377fe > [ 0.000000] HighMem 0x000377fe -> 0x0003f6d0 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000001 -> 0x0000009f > [ 0.000000] 0: 0x00000100 -> 0x0003f6d0 > [ 0.000000] On node 0 totalpages: 259694 > [ 0.000000] free_area_init_node: node 0, pgdat c13b3fc0, node_mem_map = c14d8020 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1744 pages used for memmap > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 254 pages used for memmap > [ 0.000000] HighMem zone: 32212 pages, LIFO batch:7 > [ 0.000000] Using APIC driver default > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI = 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level= ) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 24 > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 000000000= 00a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 000000000= 00e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 000000000= 0100000 > [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 400000= 00:a0000000) > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 n= r_node_ids:1 > [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1cce000 s33940 r0 d23404 u= 65536 > [ 0.000000] pcpu-alloc: s33940 r0 d23404 u65536 alloc=3D16*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1=20 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. To= tal pages: 257664 > [ 0.000000] Kernel command line: root=3DUUID=3D67d4bec9-8770-46d3-b483= -a53af24245f9 ro quiet > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 = bytes) > [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 by= tes) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0) > [ 0.000000] Memory: 1016784k/1039168k available (2523k kernel code, 21= 992k reserved, 1301k data, 380k init, 129864k highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) > [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > [ 0.000000] .init : 0xc13bd000 - 0xc141c000 ( 380 kB) > [ 0.000000] .data : 0xc1276d83 - 0xc13bc400 (1301 kB) > [ 0.000000] .text : 0xc1000000 - 0xc1276d83 (2523 kB) > [ 0.000000] Checking if this processor honours the WP bit even in supe= rvisor mode...Ok. > [ 0.000000] SLUB: Genslabs=3D13, HWalign=3D64, Order=3D0-3, MinObjects= =3D0, CPUs=3D2, Nodes=3D1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:1280 > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] hpet clockevent registered > [ 0.000000] Fast TSC calibration using PIT > [ 0.000000] Detected 1596.130 MHz processor. > [ 0.004009] Calibrating delay loop (skipped), value calculated using t= imer frequency.. 3192.26 BogoMIPS (lpj=3D6384520) > [ 0.004059] Security Framework initialized > [ 0.004067] SELinux: Disabled at boot. > [ 0.004083] Mount-cache hash table entries: 512 > [ 0.004318] Initializing cgroup subsys ns > [ 0.004327] Initializing cgroup subsys cpuacct > [ 0.004336] Initializing cgroup subsys devices > [ 0.004342] Initializing cgroup subsys freezer > [ 0.004347] Initializing cgroup subsys net_cls > [ 0.004383] Atom PSE erratum detected, BIOS microcode update recommend= ed > [ 0.004392] CPU: Physical Processor ID: 0 > [ 0.004396] CPU: Processor Core ID: 0 > [ 0.004402] mce: CPU supports 5 MCE banks > [ 0.004415] CPU0: Thermal monitoring enabled (TM1) > [ 0.004422] using mwait in idle threads. > [ 0.004435] Performance Events: Atom events, Intel PMU driver. > [ 0.004448] ... version: 3 > [ 0.004452] ... bit width: 40 > [ 0.004455] ... generic registers: 2 > [ 0.004460] ... value mask: 000000ffffffffff > [ 0.004464] ... max period: 000000007fffffff > [ 0.004468] ... fixed-purpose events: 3 > [ 0.004472] ... event mask: 0000000700000003 > [ 0.008014] Checking 'hlt' instruction... OK. > [ 0.025383] ACPI: Core revision 20100121 > [ 0.040096] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.040574] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2= =3D-1 > [ 0.082098] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 > [ 0.084000] Booting Node 0, Processors #1 Ok. > [ 0.008000] Initializing CPU#1 > [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommend= ed > [ 0.172028] Brought up 2 CPUs > [ 0.172037] Total of 2 processors activated (6384.20 BogoMIPS). > [ 0.172587] devtmpfs: initialized > [ 0.173213] regulator: core version 0.5 > [ 0.173297] NET: Registered protocol family 16 > [ 0.173506] ACPI: bus type pci registered > [ 0.173647] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe00000= 00-0xefffffff] (base 0xe0000000) > [ 0.173656] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E= 820 > [ 0.173661] PCI: Using MMCONFIG for extended config space > [ 0.173665] PCI: Using configuration type 1 for base access > [ 0.174457] bio: create slab at 0 > [ 0.176878] ACPI: EC: Look up EC in DSDT > [ 0.181062] ACPI: BIOS _OSI(Linux) query ignored > [ 0.183250] ACPI: SSDT 3f6dcc32 00245 (v02 PmRef Cpu0Ist 00003000 IN= TL 20050624) > [ 0.184303] ACPI: SSDT 3f6dc5c8 005E5 (v02 PmRef Cpu0Cst 00003001 IN= TL 20050624) > [ 0.185530] ACPI: SSDT 3f6dce77 000D4 (v02 PmRef Cpu1Ist 00003000 IN= TL 20050624) > [ 0.186276] ACPI: SSDT 3f6dcbad 00085 (v02 PmRef Cpu1Cst 00003000 IN= TL 20050624) > [ 0.240069] ACPI: Interpreter enabled > [ 0.240085] ACPI: (supports S0 S3 S4 S5) > [ 0.240136] ACPI: Using IOAPIC for interrupt routing > [ 0.289266] ACPI: EC: GPE =3D 0x19, I/O: command/status =3D 0x66, data= =3D 0x62 > [ 0.289714] ACPI: No dock devices found. > [ 0.289722] PCI: Using host bridge windows from ACPI; if necessary, us= e "pci=3Dnocrs" and report a bug > [ 0.290670] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.292534] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7= ] > [ 0.292542] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff= ] > [ 0.292549] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x= 000bffff] > [ 0.292556] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x= 000d3fff] > [ 0.292562] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x= 000d7fff] > [ 0.292569] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x= 000dbfff] > [ 0.292575] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x= 000dffff] > [ 0.292582] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0x= febfffff] > [ 0.292672] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf007ffff] > [ 0.292681] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807] > [ 0.292690] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] > [ 0.292699] pci 0000:00:02.0: reg 1c: [mem 0xf0300000-0xf033ffff] > [ 0.292749] pci 0000:00:02.1: reg 10: [mem 0xf0080000-0xf00fffff] > [ 0.292879] pci 0000:00:1b.0: reg 10: [mem 0xf0540000-0xf0543fff 64bit= ] > [ 0.292956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.292965] pci 0000:00:1b.0: PME# disabled > [ 0.293090] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.293098] pci 0000:00:1c.0: PME# disabled > [ 0.293223] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.293231] pci 0000:00:1c.1: PME# disabled > [ 0.293356] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.293364] pci 0000:00:1c.2: PME# disabled > [ 0.293450] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] > [ 0.293533] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] > [ 0.293617] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] > [ 0.293700] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f] > [ 0.293779] pci 0000:00:1d.7: reg 10: [mem 0xf0544000-0xf05443ff] > [ 0.293858] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.293866] pci 0000:00:1d.7: PME# disabled > [ 0.294058] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by IC= H6 ACPI/GPIO/TCO > [ 0.294067] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by IC= H6 GPIO > [ 0.294076] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680= (mask 007f) > [ 0.294084] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c= (mask 007f) > [ 0.294094] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068= (mask 0007) > [ 0.294157] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] > [ 0.294170] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] > [ 0.294182] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] > [ 0.294195] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] > [ 0.294207] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f] > [ 0.294306] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf] > [ 0.294477] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf01000ff] > [ 0.294562] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] > [ 0.294727] pci 0000:02:00.2: reg 10: [mem 0xf0100400-0xf01004ff] > [ 0.294963] pci 0000:02:00.3: reg 10: [mem 0xf0100800-0xf01008ff] > [ 0.300066] pci 0000:00:1c.0: PCI bridge to [bus 02-02] > [ 0.300076] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (dis= abled) > [ 0.300085] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fff= ff] > [ 0.300098] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fff= ff pref] (disabled) > [ 0.300488] pci 0000:03:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit= ] > [ 0.300715] pci 0000:03:00.0: supports D1 D2 > [ 0.300720] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold > [ 0.300734] pci 0000:03:00.0: PME# disabled > [ 0.300928] pci 0000:00:1c.1: PCI bridge to [bus 03-03] > [ 0.300937] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (dis= abled) > [ 0.300946] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fff= ff] > [ 0.300958] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fff= ff pref] (disabled) > [ 0.301152] pci 0000:04:00.0: reg 10: [io 0x2000-0x20ff] > [ 0.301248] pci 0000:04:00.0: reg 18: [mem 0xf0610000-0xf0610fff 64bit= pref] > [ 0.301318] pci 0000:04:00.0: reg 20: [mem 0xf0600000-0xf060ffff 64bit= pref] > [ 0.301379] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] > [ 0.301555] pci 0000:04:00.0: supports D1 D2 > [ 0.301560] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3col= d > [ 0.301605] pci 0000:04:00.0: PME# disabled > [ 0.301804] pci 0000:00:1c.2: PCI bridge to [bus 04-04] > [ 0.301813] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] > [ 0.301822] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fff= ff] (disabled) > [ 0.301835] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fff= ff 64bit pref] > [ 0.301934] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive d= ecode) > [ 0.301943] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (dis= abled) > [ 0.301953] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fff= ff] (disabled) > [ 0.301965] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fff= ff pref] (disabled) > [ 0.301972] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (sub= tractive decode) > [ 0.301978] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (sub= tractive decode) > [ 0.301984] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bff= ff] (subtractive decode) > [ 0.301999] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3f= ff] (subtractive decode) > [ 0.302005] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7f= ff] (subtractive decode) > [ 0.302012] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbf= ff] (subtractive decode) > [ 0.302018] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dff= ff] (subtractive decode) > [ 0.302025] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfff= ff] (subtractive decode) > [ 0.302061] pci_bus 0000:00: on NUMA node 0 > [ 0.302071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.302443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 0.302670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 0.302823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > [ 0.303044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > [ 0.316808] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 1= 4 15) > [ 0.317001] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 1= 4 15) > [ 0.317190] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14= 15) *11 > [ 0.317380] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14= 15) *10 > [ 0.317571] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14= 15) *0, disabled. > [ 0.317763] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14= 15) *0, disabled. > [ 0.317956] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 1= 4 15) > [ 0.318146] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 1= 4 15) > [ 0.318380] vgaarb: device added: PCI:0000:00:02.0,decodes=3Dio+mem,ow= ns=3Dio+mem,locks=3Dnone > [ 0.318403] vgaarb: loaded > [ 0.318447] PCI: Using ACPI for IRQ routing > [ 0.318447] PCI: pci_cache_line_size set to 64 bytes > [ 0.318447] reserve RAM buffer: 000000000009f800 - 000000000009ffff= =20 > [ 0.318447] reserve RAM buffer: 000000003f6d0000 - 000000003fffffff= =20 > [ 0.318447] HPET: 3 timers in total, 0 timers will be used for per-cpu= timer > [ 0.318447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.318447] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.324041] Switching to clocksource tsc > [ 0.326350] pnp: PnP ACPI init > [ 0.326386] ACPI: bus type pnp registered > [ 0.348153] pnp: PnP ACPI: found 11 devices > [ 0.348159] ACPI: ACPI bus type pnp unregistered > [ 0.348167] PnPBIOS: Disabled by ACPI PNP > [ 0.348197] system 00:01: [mem 0xe0000000-0xefffffff] has been reserve= d > [ 0.348205] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserve= d > [ 0.348212] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserve= d > [ 0.348219] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserve= d > [ 0.348226] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserve= d > [ 0.348233] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserve= d > [ 0.348240] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserve= d > [ 0.348247] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserve= d > [ 0.348262] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserve= d > [ 0.348277] system 00:06: [io 0x0680-0x069f] has been reserved > [ 0.348284] system 00:06: [io 0x0800-0x080f] has been reserved > [ 0.348291] system 00:06: [io 0x1000-0x107f] has been reserved > [ 0.348297] system 00:06: [io 0x1180-0x11bf] has been reserved > [ 0.348304] system 00:06: [io 0x1640-0x164f] has been reserved > [ 0.348311] system 00:06: [io 0xfe00-0xfe7f] has been reserved > [ 0.348318] system 00:06: [io 0xff00-0xff7f] has been reserved > [ 0.348330] system 00:07: [io 0x06a0-0x06af] has been reserved > [ 0.348336] system 00:07: [io 0x06b0-0x06ff] has been reserved > [ 0.383471] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401ff= fff pref] > [ 0.383483] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403ff= fff 64bit pref] > [ 0.383491] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40400000-0x407ff= fff] > [ 0.383500] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] > [ 0.383507] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] > [ 0.383515] pci 0000:02:00.0: BAR 6: assigned [mem 0x40000000-0x4000ff= ff pref] > [ 0.383522] pci 0000:00:1c.0: PCI bridge to [bus 02-02] > [ 0.383529] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] > [ 0.383540] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fff= ff] > [ 0.383549] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fff= ff pref] > [ 0.383561] pci 0000:00:1c.1: PCI bridge to [bus 03-03] > [ 0.383568] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] > [ 0.383578] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fff= ff] > [ 0.383587] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fff= ff 64bit pref] > [ 0.383602] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0620000-0xf063ff= ff pref] > [ 0.383607] pci 0000:00:1c.2: PCI bridge to [bus 04-04] > [ 0.383614] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] > [ 0.383624] pci 0000:00:1c.2: bridge window [mem 0x40400000-0x407fff= ff] > [ 0.383634] pci 0000:00:1c.2: bridge window [mem 0xf0600000-0xf06fff= ff 64bit pref] > [ 0.383646] pci 0000:00:1e.0: PCI bridge to [bus 05-05] > [ 0.383650] pci 0000:00:1e.0: bridge window [io disabled] > [ 0.383659] pci 0000:00:1e.0: bridge window [mem disabled] > [ 0.383666] pci 0000:00:1e.0: bridge window [mem pref disabled] > [ 0.383711] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ = 17 > [ 0.383720] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.383739] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ = 16 > [ 0.383749] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.383768] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ = 18 > [ 0.383776] pci 0000:00:1c.2: setting latency timer to 64 > [ 0.383790] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.383798] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.383804] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.383810] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.383816] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] > [ 0.383821] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] > [ 0.383827] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] > [ 0.383833] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] > [ 0.383839] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff] > [ 0.383847] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] > [ 0.383855] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff] > [ 0.383862] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff pre= f] > [ 0.383868] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] > [ 0.383874] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff] > [ 0.383880] pci_bus 0000:03: resource 2 [mem 0x40200000-0x403fffff 64b= it pref] > [ 0.383886] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] > [ 0.383892] pci_bus 0000:04: resource 1 [mem 0x40400000-0x407fffff] > [ 0.383898] pci_bus 0000:04: resource 2 [mem 0xf0600000-0xf06fffff 64b= it pref] > [ 0.383905] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] > [ 0.383910] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] > [ 0.383916] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.383922] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff] > [ 0.383928] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff] > [ 0.383934] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff] > [ 0.383940] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff] > [ 0.383946] pci_bus 0000:05: resource 11 [mem 0x40000000-0xfebfffff] > [ 0.384001] NET: Registered protocol family 2 > [ 0.384127] IP route cache hash table entries: 32768 (order: 5, 131072= bytes) > [ 0.384679] TCP established hash table entries: 131072 (order: 8, 1048= 576 bytes) > [ 0.385644] TCP bind hash table entries: 65536 (order: 7, 524288 bytes= ) > [ 0.386100] TCP: Hash tables configured (established 131072 bind 65536= ) > [ 0.386107] TCP reno registered > [ 0.386116] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 0.386137] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 0.386346] NET: Registered protocol family 1 > [ 0.386389] pci 0000:00:02.0: Boot video device > [ 0.386784] PCI: CLS 64 bytes, default 64 > [ 0.386896] Unpacking initramfs... > [ 0.763249] Freeing initrd memory: 7092k freed > [ 0.770033] Simple Boot Flag at 0x36 set to 0x1 > [ 0.770720] audit: initializing netlink socket (disabled) > [ 0.770746] type=3D2000 audit(1278020463.767:1): initialized > [ 0.771065] highmem bounce pool size: 64 pages > [ 0.771075] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 0.774308] VFS: Disk quotas dquot_6.5.2 > [ 0.774418] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.774596] msgmni has been set to 1746 > [ 0.774982] alg: No test for stdrng (krng) > [ 0.775113] Block layer SCSI generic (bsg) driver version 0.4 loaded (= major 253) > [ 0.775120] io scheduler noop registered > [ 0.775124] io scheduler deadline registered > [ 0.775213] io scheduler cfq registered (default) > [ 0.775393] pcieport 0000:00:1c.0: setting latency timer to 64 > [ 0.775465] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X > [ 0.775656] pcieport 0000:00:1c.1: setting latency timer to 64 > [ 0.775721] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X > [ 0.775895] pcieport 0000:00:1c.2: setting latency timer to 64 > [ 0.775959] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X > [ 0.776164] pcieport 0000:00:1c.0: Requesting control of PCIe PME from= ACPI BIOS > [ 0.776181] pcieport 0000:00:1c.0: Failed to receive control of PCIe P= ME service: no _OSC support > [ 0.776192] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -= 13 > [ 0.776202] pcieport 0000:00:1c.1: Requesting control of PCIe PME from= ACPI BIOS > [ 0.776210] pcieport 0000:00:1c.1: Failed to receive control of PCIe P= ME service: no _OSC support > [ 0.776218] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -= 13 > [ 0.776227] pcieport 0000:00:1c.2: Requesting control of PCIe PME from= ACPI BIOS > [ 0.776234] pcieport 0000:00:1c.2: Failed to receive control of PCIe P= ME service: no _OSC support > [ 0.776242] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -= 13 > [ 0.776480] isapnp: Scanning for PnP cards... > [ 1.130188] isapnp: No Plug & Play device found > [ 1.133880] Linux agpgart interface v0.103 > [ 1.134041] agpgart-intel 0000:00:00.0: Intel 945GME Chipset > [ 1.134408] agpgart-intel 0000:00:00.0: detected 7932K stolen memory > [ 1.137095] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000= 000 > [ 1.137257] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.138035] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0= x64 irq 1,12 > [ 1.177108] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.177124] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.177379] mice: PS/2 mouse device common for all mice > [ 1.179147] rtc_cmos 00:08: RTC can wake from S4 > [ 1.179231] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 > [ 1.179277] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet i= rqs > [ 1.179302] cpuidle: using governor ladder > [ 1.179307] cpuidle: using governor menu > [ 1.179316] No iBFT detected. > [ 1.179896] TCP cubic registered > [ 1.180273] NET: Registered protocol family 10 > [ 1.181060] lo: Disabled Privacy Extensions > [ 1.181578] Mobile IPv6 > [ 1.181584] NET: Registered protocol family 17 > [ 1.181614] Using IPI No-Shortcut mode > [ 1.181804] PM: Resume from disk failed. > [ 1.181818] registered taskstats version 1 > [ 1.182663] rtc_cmos 00:08: setting system clock to 2010-07-01 21:41:0= 4 UTC (1278020464) > [ 1.182753] Initalizing network drop monitor service > [ 1.182857] Freeing unused kernel memory: 380k freed > [ 1.183141] Write protecting the kernel text: 2524k > [ 1.183183] Write protecting the kernel read-only data: 924k > [ 1.213820] input: AT Translated Set 2 keyboard as /devices/platform/i= 8042/serio0/input/input0 > [ 1.402848] thermal LNXTHERM:01: registered as thermal_zone0 > [ 1.402868] ACPI: Thermal Zone [TZ01] (40 C) > [ 2.054768] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.054867] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IR= Q 18 > [ 2.055022] r8169 0000:04:00.0: setting latency timer to 64 > [ 2.055280] r8169 0000:04:00.0: irq 27 for MSI/MSI-X > [ 2.056894] r8169 0000:04:00.0: eth0: RTL8102e at 0xf80f8000, 00:21:70= :ce:d2:2a, XID 04a00000 IRQ 27 > [ 2.101785] usbcore: registered new interface driver usbfs > [ 2.101852] usbcore: registered new interface driver hub > [ 2.101965] usbcore: registered new device driver usb > [ 2.189005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.189087] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->= IRQ 23 > [ 2.189134] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 2.189144] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.189201] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bu= s number 1 > [ 2.189254] ehci_hcd 0000:00:1d.7: using broken periodic workaround > [ 2.189275] ehci_hcd 0000:00:1d.7: debug port 1 > [ 2.193166] ehci_hcd 0000:00:1d.7: cache line size of 64 is not suppor= ted > [ 2.265080] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0544000 > [ 2.277032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 2.277103] usb usb1: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 > [ 2.277113] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 2.277121] usb usb1: Product: EHCI Host Controller > [ 2.277128] usb usb1: Manufacturer: Linux 2.6.34-1-686 ehci_hcd > [ 2.277135] usb usb1: SerialNumber: 0000:00:1d.7 > [ 2.277476] hub 1-0:1.0: USB hub found > [ 2.277493] hub 1-0:1.0: 8 ports detected > [ 2.589050] usb 1-2: new high speed USB device using ehci_hcd and addr= ess 2 > [ 2.683218] uhci_hcd: USB Universal Host Controller Interface driver > [ 2.683392] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 > [ 2.683455] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 > [ 2.683475] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->= IRQ 23 > [ 2.683497] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 2.683507] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 2.683543] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bu= s number 2 > [ 2.683598] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 > [ 2.683721] usb usb2: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 > [ 2.683730] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 2.683738] usb usb2: Product: UHCI Host Controller > [ 2.683744] usb usb2: Manufacturer: Linux 2.6.34-1-686 uhci_hcd > [ 2.683751] usb usb2: SerialNumber: 0000:00:1d.0 > [ 2.684152] hub 2-0:1.0: USB hub found > [ 2.684173] hub 2-0:1.0: 2 ports detected > [ 2.684406] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->= IRQ 19 > [ 2.684429] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 2.684438] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 2.684467] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bu= s number 3 > [ 2.684534] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 > [ 2.684650] usb usb3: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 > [ 2.684660] usb usb3: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 2.684667] usb usb3: Product: UHCI Host Controller > [ 2.684673] usb usb3: Manufacturer: Linux 2.6.34-1-686 uhci_hcd > [ 2.684680] usb usb3: SerialNumber: 0000:00:1d.1 > [ 2.685026] hub 3-0:1.0: USB hub found > [ 2.685043] hub 3-0:1.0: 2 ports detected > [ 2.685227] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->= IRQ 18 > [ 2.685247] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 2.685256] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 2.685281] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bu= s number 4 > [ 2.685351] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 > [ 2.685471] usb usb4: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 > [ 2.685480] usb usb4: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 2.685488] usb usb4: Product: UHCI Host Controller > [ 2.685495] usb usb4: Manufacturer: Linux 2.6.34-1-686 uhci_hcd > [ 2.685502] usb usb4: SerialNumber: 0000:00:1d.2 > [ 2.685880] hub 4-0:1.0: USB hub found > [ 2.685895] hub 4-0:1.0: 2 ports detected > [ 2.686126] uhci_hcd 0000:00:1d.3: power state changed by ACPI to D0 > [ 2.686189] uhci_hcd 0000:00:1d.3: power state changed by ACPI to D0 > [ 2.686207] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) ->= IRQ 16 > [ 2.686227] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 2.686236] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 2.686263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bu= s number 5 > [ 2.686330] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 > [ 2.686445] usb usb5: New USB device found, idVendor=3D1d6b, idProduct= =3D0001 > [ 2.686454] usb usb5: New USB device strings: Mfr=3D3, Product=3D2, Se= rialNumber=3D1 > [ 2.686462] usb usb5: Product: UHCI Host Controller > [ 2.686469] usb usb5: Manufacturer: Linux 2.6.34-1-686 uhci_hcd > [ 2.686476] usb usb5: SerialNumber: 0000:00:1d.3 > [ 2.686781] hub 5-0:1.0: USB hub found > [ 2.686795] hub 5-0:1.0: 2 ports detected > [ 2.799854] usb 1-2: New USB device found, idVendor=3D064e, idProduct= =3Da102 > [ 2.799865] usb 1-2: New USB device strings: Mfr=3D2, Product=3D1, Ser= ialNumber=3D0 > [ 2.799874] usb 1-2: Product: Laptop_Integrated_Webcam_0.3M > [ 2.799881] usb 1-2: Manufacturer: SuYin > [ 3.156047] usb 5-1: new full speed USB device using uhci_hcd and addr= ess 2 > [ 3.335401] usb 5-1: New USB device found, idVendor=3D413c, idProduct= =3D02b0 > [ 3.335412] usb 5-1: New USB device strings: Mfr=3D1, Product=3D2, Ser= ialNumber=3D3 > [ 3.335421] usb 5-1: Product: BCM2046 Bluetooth Device > [ 3.335427] usb 5-1: Manufacturer: Broadcom Corp > [ 3.335433] usb 5-1: SerialNumber: 002269EA00DE > [ 3.898258] SCSI subsystem initialized > [ 4.280501] sdhci: Secure Digital Host Controller Interface driver > [ 4.280510] sdhci: Copyright(c) Pierre Ossman > [ 4.300926] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382]= (rev 0) > [ 4.300969] sdhci-pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -= > IRQ 16 > [ 4.301093] sdhci-pci 0000:02:00.0: setting latency timer to 64 > [ 4.301844] Registered led device: mmc0:: > [ 4.302114] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA > [ 4.302156] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381]= (rev 0) > [ 4.302198] sdhci-pci 0000:02:00.2: PCI INT A -> GSI 16 (level, low) -= > IRQ 16 > [ 4.302217] sdhci-pci 0000:02:00.2: Refusing to bind to secondary inte= rface. > [ 4.302233] sdhci-pci 0000:02:00.2: PCI INT A disabled > [ 4.310143] libata version 3.00 loaded. > [ 4.321763] ata_piix 0000:00:1f.1: version 2.13 > [ 4.321799] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) ->= IRQ 19 > [ 4.321887] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 4.322063] scsi0 : ata_piix > [ 4.322904] scsi1 : ata_piix > [ 4.324786] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 i= rq 14 > [ 4.324796] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 i= rq 15 > [ 4.328145] ata2: port disabled. ignoring. > [ 4.419058] mmc0: new MMC card at address 0001 > [ 4.457070] mmcblk0: mmc0:0001 AF MC 122 MiB=20 > [ 4.457199] mmcblk0: p1 > [ 4.489521] ata1.00: CFA: STEC PATA 8GB, D5221-10, max UDMA/133 > [ 4.489530] ata1.00: 15005088 sectors, multi 0: LBA=20 > [ 4.497434] ata1.00: configured for UDMA/100 > [ 4.497657] scsi 0:0:0:0: Direct-Access ATA STEC PATA 8GB = D522 PQ: 0 ANSI: 5 > [ 4.568362] sd 0:0:0:0: [sda] 15005088 512-byte logical blocks: (7.68 = GB/7.15 GiB) > [ 4.568608] sd 0:0:0:0: [sda] Write Protect is off > [ 4.568620] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 4.568719] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enable= d, doesn't support DPO or FUA > [ 4.569333] sda: sda1 > [ 4.570591] sd 0:0:0:0: [sda] Attached SCSI disk > [ 5.175260] kjournald starting. Commit interval 5 seconds > [ 5.175280] EXT3-fs (sda1): mounted filesystem with ordered data mode > [ 5.811653] udev: starting version 141 > [ 8.117342] input: PC Speaker as /devices/platform/pcspkr/input/input1 > [ 8.153161] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) = -> IRQ 19 > [ 8.153177] ACPI: resource 0000:00:1f.3 [io 0x18a0-0x18bf] conflicts = with ACPI region SMBI [??? 0x000018a0-0x000018af flags 0x49] > [ 8.153187] ACPI: If an ACPI driver is available for this device, you = should use it instead of the native driver > [ 8.517463] Bluetooth: Core ver 2.15 > [ 8.522884] NET: Registered protocol family 31 > [ 8.522892] Bluetooth: HCI device and connection manager initialized > [ 8.522900] Bluetooth: HCI socket layer initialized > [ 8.837401] Linux video capture interface: v2.00 > [ 8.844608] jmb38x_ms 0000:02:00.3: PCI INT A -> GSI 16 (level, low) -= > IRQ 16 > [ 8.844625] jmb38x_ms 0000:02:00.3: setting latency timer to 64 > [ 8.863808] Bluetooth: Generic Bluetooth USB driver ver 0.6 > [ 8.865577] usbcore: registered new interface driver btusb > [ 9.073009] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0= .3M (064e:a102) > [ 9.095152] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:0= 0/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input2 > [ 9.095240] usbcore: registered new interface driver uvcvideo > [ 9.095246] USB Video Class driver (v0.1.0) > [ 9.311319] leds_ss4200: no LED devices found > [ 9.824092] intel_rng: FWH not detected > [ 9.904095] compal-laptop: Identified laptop model 'Dell Mini 9'. > [ 9.918041] compal-laptop: driver 0.2.6 successfully loaded. > [ 10.000761] dcdbas dcdbas: Dell Systems Management Base Driver (versio= n 5.6.0-3.2) > [ 10.031878] dell-laptop: Blacklisted hardware detected - not enabling = rfkill > [ 10.748521] b43-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17 (level, l= ow) -> IRQ 17 > [ 10.748549] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 > [ 10.772520] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor = 0x4243) > [ 10.772549] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor= 0x4243) > [ 10.772573] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x42= 43) > [ 10.772597] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x424= 3) > [ 10.872370] ssb: Sonics Silicon Backplane found on PCI device 0000:03:= 00.0 > [ 11.009241] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0= C0D:00/input/input3 > [ 11.009721] ACPI: Lid Switch [LID0] > [ 11.010191] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PN= P0C0C:00/input/input4 > [ 11.010522] ACPI: Power Button [PWRB] > [ 11.010957] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PN= P0C0E:00/input/input5 > [ 11.011274] ACPI: Sleep Button [SLPB] > [ 11.024053] Monitor-Mwait will be used to enter C-1 state > [ 11.041306] Monitor-Mwait will be used to enter C-2 state > [ 11.048032] Monitor-Mwait will be used to enter C-3 state > [ 11.048057] Marking TSC unstable due to TSC halts in idle > [ 11.050585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/in= put/input6 > [ 11.050733] ACPI: Power Button [PWRF] > [ 11.067788] Switching to clocksource hpet > [ 12.524036] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: = 0xd04711/0xa00000/0x20000 > [ 12.872262] input: SynPS/2 Synaptics TouchPad as /devices/platform/i80= 42/serio1/input/input7 > [ 14.343456] cfg80211: Calling CRDA to update world regulatory domain > [ 16.225360] b43-phy0: Broadcom 4312 WLAN found (core revision 15) > [ 16.322859] acpi device:00: registered as cooling_device2 > [ 16.323284] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A= 08:00/LNXVIDEO:00/input/input8 > [ 16.323421] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:= no) > [ 20.377806] ACPI: AC Adapter [ACAD] (on-line) > [ 20.536445] ACPI: EC: GPE storm detected, transactions will use pollin= g mode > [ 20.661328] ACPI: Battery Slot [BAT1] (battery present) > [ 20.859305] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -= > IRQ 22 > [ 20.859456] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X > [ 20.859521] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 21.080215] phy0: Selected rate control algorithm 'minstrel' > [ 21.082001] Registered led device: b43-phy0::tx > [ 21.082070] Registered led device: b43-phy0::rx > [ 21.082134] Registered led device: b43-phy0::radio > [ 21.082324] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID:= FW13 ] > [ 21.280993] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1= b.0/input/input9 > [ 22.541029] EXT3-fs (sda1): using internal journal > [ 23.638269] loop: module loaded > [ 24.343487] NET: Registered protocol family 15 > [ 24.541323] alg: No test for cipher_null (cipher_null-generic) > [ 24.541427] alg: No test for ecb(cipher_null) (ecb-cipher_null) > [ 24.541517] alg: No test for digest_null (digest_null-generic) > [ 24.541605] alg: No test for compress_null (compress_null-generic) > [ 25.700500] padlock: VIA PadLock Hash Engine not detected. > [ 26.372455] padlock: VIA PadLock Hash Engine not detected. > [ 28.349988] padlock: VIA PadLock not detected. > [ 34.820268] b43 ssb0:0: firmware: requesting b43/ucode15.fw > [ 34.840703] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw > [ 34.861071] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw > [ 35.016266] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15= :32:10) > [ 40.562226] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 40.562777] r8169 0000:04:00.0: eth0: link down > [ 40.563220] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 43.209460] wlan0: deauthenticating from 06:18:4d:49:80:07 by local ch= oice (reason=3D3) > [ 43.209812] wlan0: authenticate with 06:18:4d:49:80:07 (try 1) > [ 43.212491] wlan0: authenticated > [ 43.213172] wlan0: associate with 06:18:4d:49:80:07 (try 1) > [ 43.215732] wlan0: RX AssocResp from 06:18:4d:49:80:07 (capab=3D0x431 = status=3D0 aid=3D1) > [ 43.215742] wlan0: associated > [ 43.218281] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 43.218439] cfg80211: Calling CRDA for country: DE > [ 45.065099] Bluetooth: L2CAP ver 2.14 > [ 45.065106] Bluetooth: L2CAP socket layer initialized > [ 45.191342] Bluetooth: RFCOMM TTY layer initialized > [ 45.191356] Bluetooth: RFCOMM socket layer initialized > [ 45.191362] Bluetooth: RFCOMM ver 1.11 > [ 46.686696] b43-phy0 ERROR: Fatal DMA error: 0x00000800, 0x00000000, 0= x00000000, 0x00000000, 0x00000000, 0x00000000 > [ 46.686878] b43-phy0 ERROR: This device does not support DMA on your s= ystem. Please use PIO instead. > [ 46.687041] b43-phy0: Controller RESET (DMA error) ... > [ 46.900338] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15= :32:10) > [ 52.421312] b43-phy0: Controller restarted > [ 54.024144] wlan0: no IPv6 routers present > [ 54.920178] No probe response from AP 06:18:4d:49:80:07 after 500ms, d= isconnecting. > [ 54.964212] cfg80211: Calling CRDA to update world regulatory domain > [ 56.360816] wlan0: authenticate with 06:18:4d:49:80:07 (try 1) > [ 56.363612] wlan0: authenticated > [ 56.363672] wlan0: associate with 06:18:4d:49:80:07 (try 1) > [ 56.366338] wlan0: RX AssocResp from 06:18:4d:49:80:07 (capab=3D0x431 = status=3D0 aid=3D1) > [ 56.366351] wlan0: associated > [ 67.820276] ACPI Warning: _BQC returned an invalid level (20100121/vid= eo-644) > [ 70.530545] [drm] Initialized drm 1.1.0 20060810 > [ 70.600147] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ = 16 > [ 70.600162] pci 0000:00:02.0: setting latency timer to 64 > [ 70.643287] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on = minor 0 > [ 161.121253] device wlan0 entered promiscuous mode > [ 179.304185] No probe response from AP 06:18:4d:49:80:07 after 500ms, d= isconnecting. > [ 179.624164] b43-phy0 ERROR: MAC suspend failed > [ 180.064154] b43-phy0 ERROR: MAC suspend failed > [ 180.081243] cfg80211: Calling CRDA to update world regulatory domain > [ 182.157138] wlan0: authenticate with 06:18:4d:49:80:07 (try 1) > [ 182.356188] wlan0: authenticate with 06:18:4d:49:80:07 (try 2) > [ 182.556200] wlan0: authenticate with 06:18:4d:49:80:07 (try 3) > [ 182.756182] wlan0: authentication with 06:18:4d:49:80:07 timed out > [ 199.256153] b43-phy0 ERROR: MAC suspend failed > [ 212.176142] b43-phy0 ERROR: MAC suspend failed > [ 212.776164] b43-phy0 ERROR: MAC suspend failed > [ 239.640171] b43-phy0 ERROR: MAC suspend failed > [ 240.028146] b43-phy0 ERROR: MAC suspend failed > [ 240.416165] b43-phy0 ERROR: MAC suspend failed > [ 240.804181] b43-phy0 ERROR: MAC suspend failed > [ 241.192161] b43-phy0 ERROR: MAC suspend failed > [ 241.580183] b43-phy0 ERROR: MAC suspend failed > [ 241.968183] b43-phy0 ERROR: MAC suspend failed > [ 252.669784] b43-phy1: Broadcom 4312 WLAN found (core revision 15) > [ 252.738905] phy1: Selected rate control algorithm 'minstrel' > [ 252.744804] Registered led device: b43-phy1::tx > [ 252.746101] Registered led device: b43-phy1::rx > [ 252.747464] Registered led device: b43-phy1::radio > [ 252.751118] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID:= FW13 ] > [ 252.784267] b43 ssb0:0: firmware: requesting b43/ucode15.fw > [ 252.803020] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw > [ 252.823455] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw > [ 252.980256] b43-phy1: Loading firmware version 410.2160 (2007-05-26 15= :32:10) > [ 258.513407] b43-phy1 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0= x00000000, 0x00000000, 0x00000000, 0x00000000 > [ 258.513437] b43-phy1 ERROR: This device does not support DMA on your s= ystem. Please use PIO instead. > [ 258.513456] b43-phy1: Controller RESET (DMA error) ... > [ 258.740369] b43-phy1: Loading firmware version 410.2160 (2007-05-26 15= :32:10) > [ 264.281323] b43-phy1: Controller restarted > [ 264.282886] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 270.912390] b43-phy1: Loading firmware version 410.2160 (2007-05-26 15= :32:10) > [ 276.458667] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 277.756823] wlan0: direct probe to 06:18:4d:49:80:07 (try 1) > [ 277.765756] wlan0: direct probe responded > [ 277.780112] wlan0: authenticate with 06:18:4d:49:80:07 (try 1) > [ 277.785071] wlan0: authenticated > [ 277.785139] wlan0: associate with 06:18:4d:49:80:07 (try 1) > [ 277.787782] wlan0: RX AssocResp from 06:18:4d:49:80:07 (capab=3D0x431 = status=3D0 aid=3D1) > [ 277.787794] wlan0: associated > [ 277.798160] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 288.192054] wlan0: no IPv6 routers present >=20 > ** Model information > not available >=20 > ** Loaded modules: > Module Size Used by > b43 136010 0=20 > i915 219529 2=20 > drm_kms_helper 18209 1 i915 > drm 113797 4 i915,drm_kms_helper > i2c_algo_bit 3541 1 i915 > binfmt_misc 5022 1=20 > rfcomm 24743 2=20 > l2cap 22579 3 rfcomm > crc16 1031 1 l2cap > acpi_cpufreq 5139 1=20 > cpufreq_conservative 6210 0=20 > cpufreq_stats 1944 0=20 > cpufreq_powersave 606 0=20 > cpufreq_userspace 1496 0=20 > deflate 1291 0=20 > zlib_deflate 15762 1 deflate > ctr 2687 0=20 > twofish 5669 0=20 > twofish_common 12564 1 twofish > camellia 16843 0=20 > serpent 16191 0=20 > blowfish 7256 0=20 > cast5 15585 0=20 > des_generic 15043 0=20 > cbc 1987 0=20 > aes_i586 6820 1=20 > aes_generic 25742 1 aes_i586 > xcbc 1845 0=20 > rmd160 9408 0=20 > sha512_generic 8005 0=20 > sha256_generic 10828 0=20 > sha1_generic 1403 0=20 > hmac 2005 0=20 > crypto_null 1864 0=20 > af_key 22390 2=20 > loop 9748 0=20 > snd_hda_codec_realtek 173780 1=20 > arc4 978 2=20 > snd_hda_intel 16543 3=20 > ecb 1409 2=20 > snd_hda_codec 54225 2 snd_hda_codec_realtek,snd_hda_intel > snd_hwdep 4070 1 snd_hda_codec > snd_pcm_oss 28706 0=20 > snd_mixer_oss 10474 1 snd_pcm_oss > battery 4074 0=20 > ac 1644 0=20 > snd_pcm 47768 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss > joydev 6855 0=20 > video 15177 1 i915 > output 1200 1 video > snd_seq_midi 3604 0=20 > mac80211 134629 1 b43 > cfg80211 100055 2 b43,mac80211 > snd_rawmidi 12636 1 snd_seq_midi > snd_seq_midi_event 3676 1 snd_seq_midi > button 3642 1 i915 > processor 25241 3 acpi_cpufreq > ssb 33351 1 b43 > serio_raw 2912 0=20 > snd_seq 35397 2 snd_seq_midi,snd_seq_midi_event > pcmcia 27272 2 b43,ssb > pcmcia_core 8972 1 pcmcia > snd_timer 12341 3 snd_pcm,snd_seq > snd_seq_device 3677 3 snd_seq_midi,snd_rawmidi,snd_seq > dell_laptop 4268 0=20 > dcdbas 3868 1 dell_laptop > compal_laptop 1344 0=20 > rng_core 2354 1 b43 > psmouse 39043 0=20 > evdev 5657 14=20 > snd 34771 15 snd_hda_codec_realtek,snd_hda_intel,snd_= hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,s= nd_timer,snd_seq_device > uvcvideo 44515 0=20 > btusb 8009 0=20 > jmb38x_ms 5510 0=20 > videodev 27052 1 uvcvideo > v4l1_compat 10318 2 uvcvideo,videodev > memstick 4352 1 jmb38x_ms > tpm_tis 5500 0=20 > tpm 8113 1 tpm_tis > tpm_bios 3561 1 tpm > bluetooth 35931 3 rfcomm,l2cap,btusb > i2c_i801 6506 0=20 > pcspkr 1211 0=20 > rfkill 10512 4 cfg80211,dell_laptop,compal_laptop,blueto= oth > i2c_core 12610 6 i915,drm_kms_helper,drm,i2c_algo_bit,vide= odev,i2c_i801 > soundcore 3626 1 snd > snd_page_alloc 5133 2 snd_hda_intel,snd_pcm > ext3 93348 1=20 > jbd 32625 1 ext3 > mbcache 3766 1 ext3 > sd_mod 26889 2=20 > crc_t10dif 1016 1 sd_mod > ata_generic 1951 0=20 > mmc_block 6516 0=20 > ata_piix 17348 1=20 > sdhci_pci 5146 0=20 > sdhci 12099 1 sdhci_pci > libata 116217 2 ata_generic,ata_piix > scsi_mod 103057 2 sd_mod,libata > uhci_hcd 16157 0=20 > mmc_core 39971 4 b43,ssb,mmc_block,sdhci > led_class 1571 2 b43,sdhci > ehci_hcd 28211 0=20 > usbcore 101657 5 uvcvideo,btusb,uhci_hcd,ehci_hcd > nls_base 4529 1 usbcore > r8169 25630 0=20 > mii 2718 1 r8169 > thermal 9533 0=20 > fan 2510 0=20 > thermal_sys 9406 4 video,processor,thermal,fan >=20 > ** Network interface configuration: > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). >=20 > # The loopback network interface > auto lo > iface lo inet loopback >=20 > # The primary network interface > allow-hotplug eth0 > iface eth0 inet dhcp >=20 > allow-hotplug wlan0 > iface wlan0 inet dhcp > wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf >=20 > ** Network status: > *** IP interfaces and addresses: > 1: lo: mtu 16436 qdisc noqueue state UNKNOWN=20 > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host=20 > valid_lft forever preferred_lft forever > 2: eth0: mtu 1500 qdisc pfifo_fast st= ate DOWN qlen 1000 > link/ether 00:21:70:ce:d2:2a brd ff:ff:ff:ff:ff:ff > inet 169.254.7.134/16 brd 169.254.255.255 scope link eth0:avahi > 4: wlan0: mtu 1500 qdisc mq state UP ql= en 1000 > link/ether 00:23:08:49:6f:45 brd ff:ff:ff:ff:ff:ff > inet 10.0.0.2/24 brd 1.0.23.255 scope global wlan0 > inet6 fe80::223:8ff:fe49:6f45/64 scope link=20 > valid_lft forever preferred_lft forever >=20 > *** Device statistics: > Inter-| Receive | Trans= mit > face |bytes packets errs drop fifo frame compressed multicast|bytes = packets errs drop fifo colls carrier compressed > lo: 45053 452 0 0 0 0 0 0 4505= 3 452 0 0 0 0 0 0 > eth0: 0 0 0 0 0 0 0 0 = 0 0 0 0 0 0 0 0 > wlan0: 1101320207 839055 0 0 0 0 0 0 7388= 7028 647167 0 0 0 0 0 0 >=20 > *** Protocol statistics: > Ip: > 836651 total packets received > 70 with invalid addresses > 0 forwarded > 0 incoming packets discarded > 836581 incoming packets delivered > 644863 requests sent out > 18 dropped because of missing route > Icmp: > 443 ICMP messages received > 4 input ICMP message failed. > ICMP-Eingabehistogramm: > destination unreachable: 440 > timeout in transit: 3 > 442 ICMP messages sent > 0 ICMP messages failed > ICMP-Ausgabehistogramm: > destination unreachable: 440 > echo request: 2 > IcmpMsg: > InType3: 440 > InType11: 3 > OutType3: 440 > OutType8: 2 > Tcp: > 4978 active connections openings > 120 passive connection openings > 37 failed connection attempts > 226 connection resets received > 4 connections established > 830699 segments received > 632056 segments send out > 6389 segments retransmited > 0 bad segments received. > 511 resets sent > Udp: > 5439 packets received > 0 packets to unknown port received. > 0 packet receive errors > 6010 packets sent > UdpLite: > TcpExt: > 33 resets received for embryonic SYN_RECV sockets > 2 packets pruned from receive queue because of socket buffer overrun > 2036 TCP sockets finished time wait in fast timer > 7 packets rejects in established connections because of timestamp > 99731 delayed acks sent > 5 delayed acks further delayed because of locked socket > Quick ack mode was activated 469 times > 79228 packets directly queued to recvmsg prequeue. > 49965 bytes directly in process context from backlog > 94674441 bytes directly received in process context from prequeue > 529133 packet headers predicted > 88167 packets header predicted and directly queued to user > 12958 acknowledgments not containing data payload received > 3164 predicted acknowledgments > 37 times recovered from packet loss by selective acknowledgements > 164 congestion windows recovered without slow start after partial ack > 13 TCP data loss events > 253 timeouts after reno fast retransmit > 792 timeouts after SACK recovery > 77 timeouts in loss state > 53 fast retransmits > 746 retransmits in slow start > 3129 other TCP timeouts > 6 SACK retransmits failed > 1 times receiver scheduled too late for direct processing > 183 packets collapsed in receive queue due to low socket buffer > 423 DSACKs sent for old packets > 6 DSACKs sent for out of order packets > 104 DSACKs received > 87 connections reset due to unexpected data > 24 connections reset due to early user close > 122 connections aborted due to timeout > TCPDSACKIgnoredOld: 46 > TCPDSACKIgnoredNoUndo: 21 > TCPSackShiftFallback: 624 > IpExt: > InOctets: 1089504067 > OutOctets: 53173986 >=20 > *** Device features: > eth0: 0x180 > lo: 0x13865 > wlan0: 0x2000 >=20 > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memor= y Controller Hub [8086:27ac] (rev 03) > Subsystem: Dell Device [1028:02b0] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0 > Capabilities: > Kernel driver in use: agpgart-intel >=20 > 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME= Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [V= GA controller]) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=3D5= 12K] > Region 1: I/O ports at 1800 [size=3D8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=3D256M] > Region 3: Memory at f0300000 (32-bit, non-prefetchable) [size=3D2= 56K] > Capabilities: > Kernel modules: i915 >=20 > 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME= , 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0 > Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=3D5= 12K] > Capabilities: >=20 > 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High = Definition Audio Controller [8086:27d8] (rev 02) > Subsystem: Dell Device [1028:02b0] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 28 > Region 0: Memory at f0540000 (64-bit, non-prefetchable) [size=3D1= 6K] > Capabilities: > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel >=20 > 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Exp= ress Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Bus: primary=3D00, secondary=3D02, subordinate=3D02, sec-latency= =3D0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: f0100000-f01fffff > Prefetchable memory behind bridge: 0000000040000000-00000000401ff= fff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > Kernel driver in use: pcieport > Kernel modules: shpchp >=20 > 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Exp= ress Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Bus: primary=3D00, secondary=3D03, subordinate=3D03, sec-latency= =3D0 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: f0200000-f02fffff > Prefetchable memory behind bridge: 0000000040200000-00000000403ff= fff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > Kernel driver in use: pcieport > Kernel modules: shpchp >=20 > 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Exp= ress Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Bus: primary=3D00, secondary=3D04, subordinate=3D04, sec-latency= =3D0 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: 40400000-407fffff > Prefetchable memory behind bridge: 00000000f0600000-00000000f06ff= fff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > Kernel driver in use: pcieport > Kernel modules: shpchp >=20 > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB= UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 4: I/O ports at 1820 [size=3D32] > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd >=20 > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB= UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at 1840 [size=3D32] > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd >=20 > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB= UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at 1860 [size=3D32] > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd >=20 > 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB= UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Interrupt: pin D routed to IRQ 16 > Region 4: I/O ports at 1880 [size=3D32] > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd >=20 > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB= 2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) > Subsystem: Dell Device [1028:02b0] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at f0544000 (32-bit, non-prefetchable) [size=3D1= K] > Capabilities: > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd >=20 > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [808= 6:2448] (rev e2) (prog-if 01 [Subtractive decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0 > Bus: primary=3D00, secondary=3D05, subordinate=3D05, sec-latency= =3D32 > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: >=20 > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interf= ace Bridge [8086:27b9] (rev 02) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Capabilities: > Kernel modules: intel-rng, leds-ss4200, iTCO_wdt >=20 > 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE = Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 0: I/O ports at 01f0 [size=3D8] > Region 1: I/O ports at 03f4 [size=3D1] > Region 2: I/O ports at 0170 [size=3D8] > Region 3: I/O ports at 0374 [size=3D1] > Region 4: I/O ports at 1810 [size=3D16] > Kernel driver in use: ata_piix > Kernel modules: ata_piix >=20 > 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Contro= ller [8086:27da] (rev 02) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort= - SERR- Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at 18a0 [size=3D32] > Kernel modules: i2c-i801 >=20 > 02:00.0 System peripheral [0880]: JMicron Technologies, Inc. Device [197b= :2382] > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=3D2= 56] > [virtual] Expansion ROM at 40000000 [disabled] [size=3D64K] > Capabilities: > Kernel driver in use: sdhci-pci > Kernel modules: sdhci-pci >=20 > 02:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Device [197= b:2381] (prog-if 01) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f0100400 (32-bit, non-prefetchable) [size=3D2= 56] > Capabilities: > Kernel modules: sdhci-pci >=20 > 02:00.3 System peripheral [0880]: JMicron Technologies, Inc. Device [197b= :2383] > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f0100800 (32-bit, non-prefetchable) [size=3D2= 56] > Capabilities: > Kernel driver in use: jmb38x_ms > Kernel modules: jmb38x_ms >=20 > 03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g= [14e4:4315] (rev 01) > Subsystem: Broadcom Corporation Device [14e4:04b5] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=3D1= 6K] > Capabilities: > Kernel driver in use: b43-pci-bridge > Kernel modules: ssb >=20 > 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL81= 01E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) > Subsystem: Dell Device [1028:02b0] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParEr= r- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 27 > Region 0: I/O ports at 2000 [size=3D256] > Region 2: Memory at f0610000 (64-bit, prefetchable) [size=3D4K] > Region 4: Memory at f0600000 (64-bit, prefetchable) [size=3D64K] > [virtual] Expansion ROM at f0620000 [disabled] [size=3D128K] > Capabilities: > Kernel driver in use: r8169 > Kernel modules: r8169 >=20 >=20 > ** USB devices: > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 002: ID 413c:02b0 Dell Computer Corp.=20 > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 002: ID 064e:a102 Suyin Corp. Lenovo Webcam > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >=20 >=20 > -- System Information: > Debian Release: squeeze/sid > APT prefers stable > APT policy: (990, 'stable') > Architecture: i386 (i686) >=20 > Kernel: Linux 2.6.34-1-686 (SMP w/2 CPU cores) > Locale: LANG=3Dde_DE.UTF-8, LC_CTYPE=3Dja_JP.UTF-8 (charmap=3DUTF-8) > Shell: /bin/sh linked to /bin/bash >=20 > Versions of packages linux-image-2.6.34-1-686 depends on: > ii debconf [debconf 1.5.24 Debian configuration managem= ent sy > ii initramfs-tools 0.92o tools for generating an init= ramfs > ii linux-base 2.6.34-1~experimental.1 Linux image base package > ii module-init-tool 3.4-1 tools for managing Linux ker= nel mo >=20 > Versions of packages linux-image-2.6.34-1-686 recommends: > pn firmware-linux-free (no description available) > ii libc6-i686 2.7-18lenny4 GNU C Library: Shared librar= ies [i >=20 > Versions of packages linux-image-2.6.34-1-686 suggests: > ii grub 0.97-47lenny2 GRand Unified Bootloader (Le= gacy v > pn linux-doc-2.6.34 (no description available) >=20 > Versions of packages linux-image-2.6.34-1-686 is related to: > pn firmware-bnx2 (no description available) > pn firmware-bnx2x (no description available) > pn firmware-ipw2x00 (no description available) > pn firmware-ivtv (no description available) > pn firmware-iwlwifi (no description available) > pn firmware-linux (no description available) > pn firmware-linux-nonfree (no description available) > pn firmware-qlogic (no description available) > pn firmware-ralink (no description available) > pn xen-hypervisor (no description available) >=20 > -- debconf information excluded --=20 Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse. --=-oAz7tPAmPn/chOM8NC1P Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIVAwUATDpE5+e/yOyVhhEJAQLg8g//RSlT5J8Nj7huYuimrjIhRJX9pq5kTg6W ZwovuatwsJtwIv5z7jteaYIBuZfjJUl5ZzYb/3GmP8F5K6fP5qrHvcl8DE0Iu4/Z AVTJSwb0MkwfGnC2a66IKbEaxLyDVgEAS1xlFtrwxsEn1i2eBU4xEoQdqfdtDyXm yd+OOWMg45qwe49IYiYIxAgRADNdCAexzunOi8KmecWDFNGB6op0vh2U18g92RLC lDHc2Zf6+VuNeqVaydMVD1PlNW6N9tTZoeAk1sgVDbB/hTjNHsC/2tcs05XURm2d X1sxnIXniKqYAxcycKMqusffTgb9HH21pse+cGYPyoxUURFIBcr8C9v3jzHm7xAU 3YcYKj5yEZrKLifyhzA3K7Xw/edOmPIKGxHSJuKCVLgZ8qdKp0SuFBiHWi/xezCB 1E46/DoE3toRn0Nb04cz0S1fj5gtibcLlg6w9l7Hb4ipQjhGBX4wP/bHKeQjsujQ oJba+zo4q2Des3DR+uZZeO5j+woFIs1WDfwe8jhUPg1TlV1D40LXZhMkw49Sl0M4 xvPOMQkYLtOHGPcx9xqgcvpwcDKxO06XloHFA+wpW7JnrVE+X53BpN732/ZjpJMh zTSCtGkmE0rHecVISpukavthI7snOt7y+g28RS8WcyuhtW0MfHeOXofFazsWRSRf RieXRLO+goY= =lEvS -----END PGP SIGNATURE----- --=-oAz7tPAmPn/chOM8NC1P--