Return-path: Received: from mgw-sa02.nokia.com ([147.243.1.48]:26342 "EHLO mgw-sa02.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753531Ab0H0L1Q (ORCPT ); Fri, 27 Aug 2010 07:27:16 -0400 From: Juuso Oikarinen To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, johannes.berg@intel.com Subject: [PATCHv2 3/4] cfg80211: allow changing port control protocol Date: Fri, 27 Aug 2010 14:26:53 +0300 Message-Id: <1282908414-26783-4-git-send-email-juuso.oikarinen@nokia.com> In-Reply-To: <1282908414-26783-1-git-send-email-juuso.oikarinen@nokia.com> References: <1282908414-26783-1-git-send-email-juuso.oikarinen@nokia.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Johannes Berg Some vendor specified mechanisms for 802.1X-style functionality use a different protocol than EAP (even if EAP is vendor-extensible). Allow setting the ethertype for the protocol when a driver has support for this. The default if unspecified is EAP, of course. Note: This is suitable only for station mode, not for AP implementation. Signed-off-by: Johannes Berg Signed-off-by: Juuso Oikarinen --- include/linux/nl80211.h | 16 +++++++++++++++- include/net/cfg80211.h | 24 +++++++++++++++++------- net/wireless/nl80211.c | 25 ++++++++++++++++++++++--- net/wireless/wext-sme.c | 2 ++ 4 files changed, 56 insertions(+), 11 deletions(-) diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index ec1690d..31603e8 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -295,7 +295,9 @@ * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT. + * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. * It is also sent as an event, with the BSSID and response IEs when the * connection is established or failed to be established. This can be * determined by the STATUS_CODE attribute. @@ -686,6 +688,15 @@ enum nl80211_commands { * request, the driver will assume that the port is unauthorized until * authorized by user space. Otherwise, port is marked authorized by * default in station mode. + * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the + * ethertype that will be used for key negotiation. It can be + * specified with the associate and connect commands. If it is not + * specified, the value defaults to 0x888E (PAE, 802.1X). This + * attribute is also used as a flag in the wiphy information to + * indicate that protocols other than PAE are supported. + * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom + * ethertype frames used for key negotiation must not be encrypted. * * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. @@ -951,6 +962,9 @@ enum nl80211_attrs { NL80211_ATTR_RX_FRAME_TYPES, NL80211_ATTR_FRAME_TYPE, + NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f274053..4c8c727 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -763,6 +763,10 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is * required to assume that the port is unauthorized until authorized by * user space. Otherwise, port is marked authorized by default. + * @control_port_ethertype: the control port protocol that should be + * allowed through even on unauthorized ports + * @control_port_no_encrypt: TRUE to prevent encryption of control port + * protocol frames. */ struct cfg80211_crypto_settings { u32 wpa_versions; @@ -772,6 +776,8 @@ struct cfg80211_crypto_settings { int n_akm_suites; u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; bool control_port; + __be16 control_port_ethertype; + bool control_port_no_encrypt; }; /** @@ -1293,15 +1299,19 @@ struct cfg80211_ops { * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station * on a VLAN interface) * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station + * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the + * control port protocol ethertype. The device also honours the + * control_port_no_encrypt flag. */ enum wiphy_flags { - WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), - WIPHY_FLAG_STRICT_REGULATORY = BIT(1), - WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), - WIPHY_FLAG_NETNS_OK = BIT(3), - WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), - WIPHY_FLAG_4ADDR_AP = BIT(5), - WIPHY_FLAG_4ADDR_STATION = BIT(6), + WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), + WIPHY_FLAG_STRICT_REGULATORY = BIT(1), + WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), + WIPHY_FLAG_NETNS_OK = BIT(3), + WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), + WIPHY_FLAG_4ADDR_AP = BIT(5), + WIPHY_FLAG_4ADDR_STATION = BIT(6), + WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), }; struct mac_address { diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 49f5ca3..85a23de 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -136,6 +136,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { .len = sizeof(struct nl80211_sta_flag_update), }, [NL80211_ATTR_CONTROL_PORT] = { .type = NLA_FLAG }, + [NL80211_ATTR_CONTROL_PORT_ETHERTYPE] = { .type = NLA_U16 }, + [NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT] = { .type = NLA_FLAG }, [NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG }, [NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 }, [NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 }, @@ -474,6 +476,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_PMKIDS, dev->wiphy.max_num_pmkids); + if (dev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL) + NLA_PUT_FLAG(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE); + nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES); if (!nl_modes) goto nla_put_failure; @@ -3691,7 +3696,8 @@ unlock_rtnl: return err; } -static int nl80211_crypto_settings(struct genl_info *info, +static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev, + struct genl_info *info, struct cfg80211_crypto_settings *settings, int cipher_limit) { @@ -3699,6 +3705,19 @@ static int nl80211_crypto_settings(struct genl_info *info, settings->control_port = info->attrs[NL80211_ATTR_CONTROL_PORT]; + if (info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]) { + u16 proto; + proto = nla_get_u16( + info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]); + settings->control_port_ethertype = cpu_to_be16(proto); + if (!(rdev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL) && + proto != ETH_P_PAE) + return -EINVAL; + if (info->attrs[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT]) + settings->control_port_no_encrypt = true; + } else + settings->control_port_ethertype = cpu_to_be16(ETH_P_PAE); + if (info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]) { void *data; int len, i; @@ -3826,7 +3845,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_PREV_BSSID]) prev_bssid = nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]); - err = nl80211_crypto_settings(info, &crypto, 1); + err = nl80211_crypto_settings(rdev, info, &crypto, 1); if (!err) err = cfg80211_mlme_assoc(rdev, dev, chan, bssid, prev_bssid, ssid, ssid_len, ie, ie_len, use_mfp, @@ -4303,7 +4322,7 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) connect.privacy = info->attrs[NL80211_ATTR_PRIVACY]; - err = nl80211_crypto_settings(info, &connect.crypto, + err = nl80211_crypto_settings(rdev, info, &connect.crypto, NL80211_MAX_NR_CIPHER_SUITES); if (err) return err; diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c index 9818198..6fffe62 100644 --- a/net/wireless/wext-sme.c +++ b/net/wireless/wext-sme.c @@ -197,6 +197,8 @@ int cfg80211_mgd_wext_siwessid(struct net_device *dev, wdev->wext.connect.ssid_len = len; wdev->wext.connect.crypto.control_port = false; + wdev->wext.connect.crypto.control_port_ethertype = + cpu_to_be16(ETH_P_PAE); err = cfg80211_mgd_wext_connect(rdev, wdev); out: -- 1.6.3.3