Return-path: Received: from mail-fx0-f46.google.com ([209.85.161.46]:49491 "EHLO mail-fx0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756534Ab0IGL3y (ORCPT ); Tue, 7 Sep 2010 07:29:54 -0400 From: Ohad Ben-Cohen To: , Cc: Luciano Coelho , , San Mehat , Roger Quadros , Nicolas Pitre , Gao Yunpeng , Ohad Ben-Cohen Subject: [PATCH v1 7/8] sdio: enable Runtime PM for SDIO functions Date: Tue, 7 Sep 2010 14:29:08 +0300 Message-Id: <1283858949-11073-8-git-send-email-ohad@wizery.com> In-Reply-To: <1283858949-11073-1-git-send-email-ohad@wizery.com> References: <1283858949-11073-1-git-send-email-ohad@wizery.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Enable runtime PM for SDIO functions. SDIO functions are initialized with a disabled runtime PM status, and are set active (and their usage count is incremented) only before potential drivers are probed. SDIO function drivers that support runtime PM should call pm_runtime_put_noidle() in their probe routine, and pm_runtime_get_noresume() in their remove routine (very similarly to PCI drivers). In case a matching driver does not support runtime PM, power will always be on (since the usage count is positive). Signed-off-by: Ohad Ben-Cohen --- drivers/mmc/core/sdio.c | 5 +++++ drivers/mmc/core/sdio_bus.c | 30 ++++++++++++++++++++++++++++-- 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index a5a76a8..c4022da 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -732,6 +732,11 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) err = sdio_init_func(host->card, i + 1); if (err) goto remove; + + /* + * Enable Runtime PM for this func + */ + pm_runtime_enable(&card->sdio_func[i]->dev); } mmc_release_host(host); diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 256a968..d55a592 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -126,15 +126,34 @@ static int sdio_bus_probe(struct device *dev) if (!id) return -ENODEV; + /* Unbound SDIO functions are always suspended. + * During probe, the function is set active and the usage count + * is incremented. If the driver supports runtime PM, + * it should call pm_runtime_put_noidle() in its probe routine and + * pm_runtime_get_noresume() in its remove routine. + */ + ret = pm_runtime_get_sync(dev); + if (ret) + goto out; + /* Set the default block size so the driver is sure it's something * sensible. */ sdio_claim_host(func); ret = sdio_set_block_size(func, 0); sdio_release_host(func); if (ret) - return ret; + goto disable_runtimepm; + + ret = drv->probe(func, id); + if (ret) + goto disable_runtimepm; + + return 0; - return drv->probe(func, id); +disable_runtimepm: + pm_runtime_put_noidle(dev); +out: + return ret; } static int sdio_bus_remove(struct device *dev) @@ -142,6 +161,8 @@ static int sdio_bus_remove(struct device *dev) struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); + pm_runtime_get_sync(dev); + drv->remove(func); if (func->irq_handler) { @@ -152,6 +173,11 @@ static int sdio_bus_remove(struct device *dev) sdio_release_host(func); } + pm_runtime_put_noidle(dev); + + /* Undo the runtime PM settings in sdio_bus_probe() */ + pm_runtime_put_noidle(dev); + return 0; } -- 1.7.0.4