Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:42037 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754484Ab0IOSbf (ORCPT ); Wed, 15 Sep 2010 14:31:35 -0400 From: Shahar Levi To: Cc: Luciano Coelho Subject: [PATCH 01/04] wl1271: 11n Support, Add Definitions Date: Wed, 15 Sep 2010 20:31:09 +0200 Message-Id: <1284575472-19888-2-git-send-email-shahar_levi@ti.com> In-Reply-To: <1284575472-19888-1-git-send-email-shahar_levi@ti.com> References: <1284575472-19888-1-git-send-email-shahar_levi@ti.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Added all definitions needed for 11n support. Signed-off-by: Shahar Levi --- drivers/net/wireless/wl12xx/wl1271.h | 2 +- drivers/net/wireless/wl12xx/wl1271_acx.h | 91 +++++++++++++++++++++++++++++ drivers/net/wireless/wl12xx/wl1271_conf.h | 3 + drivers/net/wireless/wl12xx/wl1271_main.c | 13 ++++ 4 files changed, 108 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h index 4134f44..fd1c2fc 100644 --- a/drivers/net/wireless/wl12xx/wl1271.h +++ b/drivers/net/wireless/wl12xx/wl1271.h @@ -423,7 +423,7 @@ struct wl1271 { /* Our association ID */ u16 aid; - /* currently configured rate set */ + /* currently configured rate set: bits0-15 BG, bits 16-23 MCS */ u32 sta_rate_set; u32 basic_rate_set; u32 basic_rate; diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h index 4235bc5..2a8fc43 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.h +++ b/drivers/net/wireless/wl12xx/wl1271_acx.h @@ -993,6 +993,97 @@ struct wl1271_acx_rssi_snr_avg_weights { u8 snr_data; }; +/* 11n command to the FW */ +/* Name: ACX_PEER_HT_CAP +* Desc: Configure HT capabilities - declare the capabilities of the peer +* we are connected to. +* Type: Configuration +* Access: Write Only +* Length: +*/ +struct wl1271_acx_ht_capabilities { + struct acx_header header; + + /* + * bit 0 - Allow HT Operation + * bit 1 - Allow Greenfield format in TX + * bit 2 - Allow Short GI in TX + * bit 3 - Allow L-SIG TXOP Protection in TX + * bit 4 - Allow HT Control fields in TX. + * Note, driver will still leave space for HT control in packets + * regardless of the value of this field. FW will be responsible to + * drop the HT field from any frame when this Bit is set to 0. + * 5 - Allow RD initiation in TXOP. FW is allowed to initate RD. + * Exact policy setting for this feature is TBD. + * Note, this bit can only be set to 1 if bit 3 is set to 1. + */ + u32 ht_capabilites; + + /* + * Indicates to which peer these capabilities are relevant. + * Note, currently this value will be set to FFFFFFFFFFFF to indicate it + * is relevant for all peers since we only support HT in infrastructure + * mode. Later on this field will be relevant to IBSS/DLS operation + */ + u8 mac_address[ETH_ALEN]; + + /* + * This the maximum a-mpdu length supported by the AP. The FW may not + * exceed this length when sending A-MPDUs + */ + u8 ampdu_max_length; + + /* + * This is the minimal spacing required when sending A-MPDUs to the AP + */ + u8 ampdu_min_spacing; +} __packed; + +/* HT Capabilites Fw Bit Mask Mapping */ +enum acx_ht_capabilites_fw { + WL1271_ACX_FW_CAP_BIT_MASK_HT_OPERATION = BIT(0), + WL1271_ACX_FW_CAP_BIT_MASK_GREENFIELD_FRAME_FORMAT = BIT(1), + WL1271_ACX_FW_CAP_BIT_MASK_SHORT_GI_FOR_20MHZ_PACKETS = BIT(2), + WL1271_ACX_FW_CAP_BIT_MASK_LSIG_TXOP_PROTECTION = BIT(3), + WL1271_ACX_FW_CAP_BIT_MASK_HT_CONTROL_FIELDS = BIT(4), + WL1271_ACX_FW_CAP_BIT_MASK_RD_INITIATION = BIT(5) +}; + +/* Name: ACX_HT_BSS_OPERATION + * Desc: Configure HT capabilities - AP rules for behavior in the BSS. + * Type: Configuration + * Access: Write Only + * Length: + */ +struct wl1271_acx_ht_information { + struct acx_header header; + + u8 rifs_mode; /* Values: 0 - RIFS not allowed, 1 - RIFS allowed */ + + u8 ht_protection; /* Values: 0 - 3 like in spec */ + + /* + * Values: 0 - GF protection not required, 1 - GF protection required + */ + u8 gf_protection; + + /* + * Values: 0 - TX Burst limit not required, 1 - TX Burst Limit required + */ + u8 ht_tx_burst_limit; + + /* + * Values: 0 - Dual CTS protection not required, + * 1 Dual CTS Protection required + * Note: When this value is set to 1 FW will protect all TXOP with RTS + * frame and will not use CTS-to-self regardless of the value of the + * ACX_CTS_PROTECTION information element + */ + u8 dual_cts_protection; + + u8 padding[3]; +} __packed; + struct wl1271_acx_fw_tsf_information { struct acx_header header; diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 0435ffd..0e22d41 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -91,6 +91,9 @@ enum { CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff }; +#define HW_BG_RATES_MASK 0xffff +#define HW_HT_RATES_OFFSET 16 + enum { CONF_SG_DISABLE = 0, CONF_SG_PROTECTIVE, diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index af26150..ae69397 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -2041,6 +2041,19 @@ static const u8 wl1271_rate_to_idx_2ghz[] = { 0 /* CONF_HW_RXTX_RATE_1 */ }; +/* 11n sta capabilities */ +#define WL12xx_HT_CAP { \ + .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \ + .ht_supported = true, \ + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \ + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \ + .mcs = { \ + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, \ + .rx_highest = cpu_to_le16(65), \ + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, \ + }, \ +} + /* can't be const, mac80211 writes to this */ static struct ieee80211_supported_band wl1271_band_2ghz = { .channels = wl1271_channels, -- 1.6.0.4