Return-path: Received: from mail-iw0-f174.google.com ([209.85.214.174]:40004 "EHLO mail-iw0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753822Ab0IVKjA convert rfc822-to-8bit (ORCPT ); Wed, 22 Sep 2010 06:39:00 -0400 Received: by iwn5 with SMTP id 5so438106iwn.19 for ; Wed, 22 Sep 2010 03:38:59 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: References: Date: Wed, 22 Sep 2010 14:38:58 +0400 Message-ID: Subject: Re: p54spi (STLC4560) with Marvel XScale CPU (kernel 2.6.25.4) From: Max Filippov To: Alex Mihaylov Cc: linux-wireless@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: > Also i got firmware ?2.13.0.0.a.13.14.arm from linux-wireles. After > loading module with proper command line, I see message > > cx3110x spi1.0: firmware boot failed > > and no other error/warning message presents. SPI signals like good. > > > phy0: p54 detected a LM20 firmware > p54: rx_mtu reduced from 3240 to 2376 > phy0: FW rev 2.13.0.0.a.13.14 - Softmac protocol 5.6 > phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > cx3110x spi1.0: loading user eeprom... Looks like you have custom eeprom image... > phy0: hwaddr 00:02:ee:c0:ff:ee, MAC:isl3820 RF:Longbc > x3110x spi1.0: firmware boot failed ...and this eeprom image has wrong format. > What's trouble? Incorrect firmware? Unsupported (so slow) SPI rate? > > I try load another firmware from 2.13... series - result: firmware > boot failed. I also try load firmware cutted from Sagrad source > (version 2.19....) result is same: firmware boot failed. > > What is my next step for this idea? I'd suggest removing file 3826.eeprom and trying to boot without it. -- Max