Message-ID: <4CBE9C4F.7050806@gmx.net>
Date: Wed, 20 Oct 2010 09:37:51 +0200
From: George <george.news@gmx.net>
MIME-Version: 1.0
To: Grazvydas Ignotas <notasas@gmail.com>
CC: Luciano Coelho <luciano.coelho@nokia.com>,
	"Luis R. Rodriguez" <mcgrof@gmail.com>,
	Bob Copeland <me@bobcopeland.com>,
	Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: Compat-wireless N900
References: <4CB6BE57.8010401@gmx.net>	<1287071844.11341.5.camel@gnutoo-laptop>	<AANLkTikosEtFnWqRVzMBKtNsB=aqOpqQFKDOZS3+pXTE@mail.gmail.com>	<4CB74759.3030807@gmx.net>	<AANLkTi=1Ar-gzRaskHGDLmkaDnr=9+oZnA=qBLCYcUAi@mail.gmail.com>	<4CB7F7C7.7030804@gmx.net>	<AANLkTi=u+mT2Xd0=0vt4uaf9hSnnkPKY+wN6DjAxME3m@mail.gmail.com>	<4CBABB84.1090100@gmx.net>	<4CBC7725.7050202@gmx.net>	<AANLkTincCSBfwa_Y-cy_42HfU5kP1puCbi2-dBwGkkHu@mail.gmail.com>	<4CBC9A51.8030309@gmx.net>	<1287427291.8043.2.camel@powerslave>	<1287428554.8043.6.camel@powerslave>	<4CBD52DE.9090804@gmx.net>	<AANLkTi=dGSVBrdDXwJgmOjEGX+i+=P_KibiJd+NNMGfy@mail.gmail.com>	<4CBDB654.6060702@gmx.net>	<AANLkTimyCv6U+Yjf7q0OFEYF3PHr5PfACSpbXbTi_PZe@mail.gmail.com>	<4CBDBEDB.3070407@gmx.net> <AANLkTik3ZdZov4OTn0NnnPe_ZUaRh_w0db4bwLYVGCRR@mail.gmail.com>
In-Reply-To: <AANLkTik3ZdZov4OTn0NnnPe_ZUaRh_w0db4bwLYVGCRR@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Sender: linux-wireless-owner@vger.kernel.org

On 19/10/2010 17:18, Grazvydas Ignotas wrote:
>> I have also set the debug ALL mode to see if I get something that can help
>> you out on finding the problem.
>>
>> When uploading only wl1251 nothing appears in dmesg. But when uploading
>> module spi, I got the following info: http://pastebin.com/ysdTSDnB
>
> You need both wl1251 and spi. This is normal output, you should get
> wlan0 interface at this point.
> --

Yes, that is what I was expecting from the begining but although phy0 
should appear in /sys/class/ieee80211, this directory is empty :(

It seems that it tries to do something but it is not finally done. 
However, as you can see it seems there is no error (at least reported). 
Could it be that spi_read buf is almost everytime reading 00 00 00 00?

Another issue is that I have to manually upload the spi module as by 
default it only uploads wl1251 but not the spi. But this is not a big deal.

Again, thank you all for the help... You are almost there (I cannot say 
we as I've been only following your advices).

TA