Return-path: Received: from mtaout02-winn.ispmail.ntl.com ([81.103.221.48]:62943 "EHLO mtaout02-winn.ispmail.ntl.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755710Ab0JaNkh (ORCPT ); Sun, 31 Oct 2010 09:40:37 -0400 From: Daniel Drake To: linville@tuxdriver.com Cc: dcbw@redhat.com Cc: linux-wireless@vger.kernel.org Cc: libertas-dev@lists.infradead.org Cc: pgf@laptop.org Subject: [PATCH] libertas: EHS_REMOVE_WAKEUP is not always supported Message-Id: <20101031134033.C97169D401B@zog.reactivated.net> Date: Sun, 31 Oct 2010 13:40:33 +0000 (GMT) Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Deepak Saxena Certain firmware versions, particularly the 8388 found on the XO-1, do not support the EHS_REMOVE_WAKEUP command that is used to disable WOL. Sending this command to the card will return a failure that would get propagated up the stack and cause suspend to fail. Instead, fall back to an all-zero wakeup mask. This fixes http://dev.laptop.org/ticket/9967 Signed-off-by: Deepak Saxena Signed-off-by: Daniel Drake [includes fixups by Paul Fox] --- drivers/net/wireless/libertas/cmd.c | 8 ++++++++ drivers/net/wireless/libertas/dev.h | 1 + drivers/net/wireless/libertas/if_usb.c | 7 +++++++ drivers/net/wireless/libertas/main.c | 3 ++- 4 files changed, 18 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 7074592..78c4da1 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -177,6 +177,14 @@ int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria, struct cmd_ds_host_sleep cmd_config; int ret; + /* + * Certain firmware versions do not support EHS_REMOVE_WAKEUP command + * and the card will return a failure. Since we need to be + * able to reset the mask, in those cases we set a 0 mask instead. + */ + if (criteria == EHS_REMOVE_WAKEUP && !priv->ehs_remove_supported) + criteria = 0; + cmd_config.hdr.size = cpu_to_le16(sizeof(cmd_config)); cmd_config.criteria = cpu_to_le32(criteria); cmd_config.gpio = priv->wol_gpio; diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index f062ed5..f5a9851 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -137,6 +137,7 @@ struct lbs_private { uint32_t wol_criteria; uint8_t wol_gpio; uint8_t wol_gap; + bool ehs_remove_supported; /* Transmitting */ int tx_pending_len; /* -1 while building packet */ diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 35931cf..6524c70 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -345,6 +345,13 @@ static int if_usb_probe(struct usb_interface *intf, if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2)) lbs_pr_err("cannot register lbs_flash_boot2 attribute\n"); + /* + * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware. + */ + priv->wol_criteria = EHS_REMOVE_WAKEUP; + if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL)) + priv->ehs_remove_supported = false; + return 0; err_start_card: diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 47ce5a6..6d7af91 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -844,9 +844,10 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev) priv->work_thread = create_singlethread_workqueue("lbs_worker"); INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker); - priv->wol_criteria = 0xffffffff; + priv->wol_criteria = EHS_REMOVE_WAKEUP; priv->wol_gpio = 0xff; priv->wol_gap = 20; + priv->ehs_remove_supported = true; goto done; -- 1.7.2.3