Return-path: Received: from mga02.intel.com ([134.134.136.20]:13568 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751234Ab0LOU3W (ORCPT ); Wed, 15 Dec 2010 15:29:22 -0500 Subject: Re: iwl rfkill suddenly dropped to hard block From: "Guy, Wey-Yi" To: "John W. Linville" Cc: Evgeniy Polyakov , Zhu Yi , Intel Linux Wireless , "netdev@vger.kernel.org" , "linux-wireless@vger.kernel.org" In-Reply-To: <20101215201126.GG2377@tuxdriver.com> References: <20101215195651.GA18545@ioremap.net> <20101215201126.GG2377@tuxdriver.com> Content-Type: text/plain Date: Wed, 15 Dec 2010 12:28:15 -0800 Message-Id: <1292444895.27593.6.camel@wwguy-ubuntu> Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Can we get a full PCI config space dump for both root complex and endpoint sudo lspci -s 00:1c.1 -xxx sudo lspci -s 03:00.0 -xxx Thanks Wey On Wed, 2010-12-15 at 12:11 -0800, John W. Linville wrote: > Cc'ing linux-wireless and Wey-Yi... > > To be honest, nearly every report of "suddenly my rfkill is stuck > on" is because the laptop has multiple rfkill keys, usually with > one of them a slider along the edge of the case. In particular, > Thinkpads have such switches. The slider gets accidently engaged > (possibly while the laptop is being transported or somesuch) and > suddenly wireless stops working. > > Please check for the above. If you are sure that isn't the case, then > please try to determine the last working kernel and do a bisection -- > hopefully you don't have to go all the way back to 2.6.33! > > Hth! > > John > > On Wed, Dec 15, 2010 at 10:56:52PM +0300, Evgeniy Polyakov wrote: > > Hi. > > > > Yesterday the latest git kernel (as of 2 days pull + i915 drm fixes > > tree) decided to turn my iwl agn adapter off. > > rfkill says it is hard blocked. It worked pretty well for the last > > several days for sure, but there was a suspend/wakeup (unsuccessful > > because i915 did not flash the display). > > > > With 2.6.33 kernel it worked for months (although without sound). > > Other (newer) stock kernels from FC13 do not turn on LCD. > > > > My tree is at 63abf3eda, which likely comes from drm-fixes or > > drm-staging kernel tree, but it is just 2 or 3 commits ahead of vanilla > > HEAD, but the same happens with 2.6.33.3-85 kernel from FC13. > > > > Attached full dmesg with iwlagn debug=127 and lspci -vvv -H1 > > > > Thank you. > > > > -- > > Evgeniy Polyakov > > > Initializing cgroup subsys cpuset > > Initializing cgroup subsys cpu > > Linux version 2.6.37-rc5-mainline+ (zbr@gavana) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #4 SMP Sat Dec 11 16:37:52 MSK 2010 > > Command line: ro root=/dev/mapper/vg_gavana-lv_root rd_LVM_LV=vg_gavana/lv_root rd_LVM_LV=vg_gavana/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) > > BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) > > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > > BIOS-e820: 0000000000100000 - 00000000db65f000 (usable) > > BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data) > > BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS) > > BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved) > > BIOS-e820: 00000000dde00000 - 00000000e0000000 (reserved) > > BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) > > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > > BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) > > BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) > > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) > > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > > BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) > > BIOS-e820: 0000000100000000 - 000000011c000000 (usable) > > NX (Execute Disable) protection: active > > DMI 2.6 present. > > DMI: 0T26D8/Latitude E4310, BIOS A04 08/10/2010 > > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > > e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > > No AGP bridge found > > last_pfn = 0x11c000 max_arch_pfn = 0x400000000 > > MTRR default type: uncachable > > MTRR fixed ranges enabled: > > 00000-9FFFF write-back > > A0000-BFFFF uncachable > > C0000-FFFFF write-protect > > MTRR variable ranges enabled: > > 0 base 000000000 mask F80000000 write-back > > 1 base 080000000 mask FC0000000 write-back > > 2 base 0C0000000 mask FE0000000 write-back > > 3 base 0DC000000 mask FFC000000 uncachable > > 4 base 100000000 mask FE0000000 write-back > > 5 base 11C000000 mask FFC000000 uncachable > > 6 disabled > > 7 disabled > > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > > original variable MTRRs > > reg 0, base: 0GB, range: 2GB, type WB > > reg 1, base: 2GB, range: 1GB, type WB > > reg 2, base: 3GB, range: 512MB, type WB > > reg 3, base: 3520MB, range: 64MB, type UC > > reg 4, base: 4GB, range: 512MB, type WB > > reg 5, base: 4544MB, range: 64MB, type UC > > total RAM covered: 3968M > > Found optimal setting for mtrr clean up > > gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G > > New variable MTRRs > > reg 0, base: 0GB, range: 2GB, type WB > > reg 1, base: 2GB, range: 1GB, type WB > > reg 2, base: 3GB, range: 512MB, type WB > > reg 3, base: 3520MB, range: 64MB, type UC > > reg 4, base: 4GB, range: 512MB, type WB > > reg 5, base: 4544MB, range: 64MB, type UC > > e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved) > > last_pfn = 0xdb65f max_arch_pfn = 0x400000000 > > found SMP MP-table at [ffff8800000f2280] f2280 > > initial memory mapped : 0 - 20000000 > > init_memory_mapping: 0000000000000000-00000000db65f000 > > 0000000000 - 00db600000 page 2M > > 00db600000 - 00db65f000 page 4k > > kernel direct mapping tables up to db65f000 @ 1fffa000-20000000 > > init_memory_mapping: 0000000100000000-000000011c000000 > > 0100000000 - 011c000000 page 2M > > kernel direct mapping tables up to 11c000000 @ db659000-db65f000 > > RAMDISK: 373a7000 - 37ff0000 > > ACPI: RSDP 00000000000fe300 00024 (v02 DELL ) > > ACPI: XSDT 00000000db67de18 0005C (v01 DELL E2 06222004 MSFT 00010013) > > ACPI: FACP 00000000db75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013) > > ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369) > > ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20101013/tbfadt-486) > > ACPI: DSDT 00000000db750018 09760 (v01 DELL E2 00001001 INTL 20080729) > > ACPI: FACS 00000000db76bf40 00040 > > ACPI: APIC 00000000db67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013) > > ACPI: MCFG 00000000db76dd18 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097) > > ACPI: HPET 00000000db76dc98 00038 (v01 DELL E2 00000001 ASL 00000061) > > ACPI: BOOT 00000000db76dc18 00028 (v01 DELL E2 06222004 AMI 00010013) > > ACPI: SLIC 00000000db766818 00176 (v03 DELL E2 06222004 MSFT 00010013) > > ACPI: SSDT 00000000db75e018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729) > > ACPI: Local APIC address 0xfee00000 > > No NUMA configuration found > > Faking a node at 0000000000000000-000000011c000000 > > Initmem setup node 0 0000000000000000-000000011c000000 > > NODE_DATA [000000011bfec000 - 000000011bffffff] > > [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880117e00000-ffff88011b7fffff] on node 0 > > Zone PFN ranges: > > DMA 0x00000010 -> 0x00001000 > > DMA32 0x00001000 -> 0x00100000 > > Normal 0x00100000 -> 0x0011c000 > > Movable zone start PFN for each node > > early_node_map[3] active PFN ranges > > 0: 0x00000010 -> 0x0000009a > > 0: 0x00000100 -> 0x000db65f > > 0: 0x00100000 -> 0x0011c000 > > On node 0 totalpages: 1013225 > > DMA zone: 56 pages used for memmap > > DMA zone: 6 pages reserved > > DMA zone: 3916 pages, LIFO batch:0 > > DMA32 zone: 14280 pages used for memmap > > DMA32 zone: 880279 pages, LIFO batch:31 > > Normal zone: 1568 pages used for memmap > > Normal zone: 113120 pages, LIFO batch:31 > > ACPI: PM-Timer IO Port: 0x408 > > ACPI: Local APIC address 0xfee00000 > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) > > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > ACPI: IRQ0 used by override. > > ACPI: IRQ2 used by override. > > ACPI: IRQ9 used by override. > > Using ACPI (MADT) for SMP configuration information > > ACPI: HPET id: 0x8086a701 base: 0xfed00000 > > SMP: Allowing 8 CPUs, 4 hotplug CPUs > > nr_irqs_gsi: 40 > > PM: Registered nosave memory: 000000000009a000 - 000000000009b000 > > PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 > > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > > PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000 > > PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000 > > PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000 > > PM: Registered nosave memory: 00000000dc000000 - 00000000dde00000 > > PM: Registered nosave memory: 00000000dde00000 - 00000000e0000000 > > PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 > > PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 > > PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 > > PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 > > PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 > > PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 > > PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 > > PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 > > PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 > > PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 > > PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 > > PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > > PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 > > PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 > > Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) > > Booting paravirtualized kernel on bare hardware > > setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 > > PERCPU: Embedded 28 pages/cpu @ffff8800db400000 s82752 r8192 d23744 u262144 > > pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152 > > pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > > Built 1 zonelists in Node order, mobility grouping on. Total pages: 997315 > > Policy zone: Normal > > Kernel command line: ro root=/dev/mapper/vg_gavana-lv_root rd_LVM_LV=vg_gavana/lv_root rd_LVM_LV=vg_gavana/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > Checking aperture... > > No AGP bridge found > > Calgary: detecting Calgary via BIOS EBDA area > > Calgary: Unable to locate Rio Grande table in EBDA - bailing! > > Memory: 3899920k/4653056k available (4454k kernel code, 600156k absent, 152980k reserved, 7041k data, 924k init) > > SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 > > Hierarchical RCU implementation. > > RCU dyntick-idle grace-period acceleration is enabled. > > RCU-based detection of stalled CPUs is disabled. > > NR_IRQS:16640 nr_irqs:744 16 > > Extended CMOS year: 2000 > > Console: colour VGA+ 80x25 > > console [tty0] enabled > > allocated 41943040 bytes of page_cgroup > > please try 'cgroup_disable=memory' option if you don't want memory cgroups > > hpet clockevent registered > > Fast TSC calibration using PIT > > spurious 8259A interrupt: IRQ7. > > Detected 2526.928 MHz processor. > > Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.85 BogoMIPS (lpj=2526928) > > pid_max: default: 32768 minimum: 301 > > Security Framework initialized > > SELinux: Initializing. > > SELinux: Starting in permissive mode > > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > > Mount-cache hash table entries: 256 > > Initializing cgroup subsys ns > > ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. > > Initializing cgroup subsys cpuacct > > Initializing cgroup subsys memory > > Initializing cgroup subsys devices > > Initializing cgroup subsys freezer > > Initializing cgroup subsys blkio > > CPU: Physical Processor ID: 0 > > CPU: Processor Core ID: 0 > > mce: CPU supports 9 MCE banks > > CPU0: Thermal monitoring handled by SMI > > using mwait in idle threads. > > Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. > > ... version: 3 > > ... bit width: 48 > > ... generic registers: 4 > > ... value mask: 0000ffffffffffff > > ... max period: 000000007fffffff > > ... fixed-purpose events: 3 > > ... event mask: 000000070000000f > > ACPI: Core revision 20101013 > > ftrace: allocating 21006 entries in 83 pages > > Setting APIC routing to flat > > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 > > CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz stepping 02 > > Booting Node 0, Processors #1 > > CPU1: Thermal monitoring handled by SMI > > #2 > > CPU2: Thermal monitoring handled by SMI > > #3 > > CPU3: Thermal monitoring handled by SMI > > Brought up 4 CPUs > > Total of 4 processors activated (20215.06 BogoMIPS). > > devtmpfs: initialized > > Time: 19:04:46 Date: 12/15/10 > > NET: Registered protocol family 16 > > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > > ACPI: bus type pci registered > > PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) > > PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > > PCI: Using configuration type 1 for base access > > bio: create slab at 0 > > ACPI: EC: Look up EC in DSDT > > [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored > > [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored > > ACPI: SSDT 00000000db7ea918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20080729) > > ACPI: Dynamic OEM Table Load: > > ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20080729) > > ACPI: SSDT 00000000db7e8018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729) > > ACPI: Dynamic OEM Table Load: > > ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729) > > ACPI: SSDT 00000000db7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729) > > ACPI: Dynamic OEM Table Load: > > ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20080729) > > ACPI: SSDT 00000000db7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729) > > ACPI: Dynamic OEM Table Load: > > ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20080729) > > ACPI: Interpreter enabled > > ACPI: (supports S0 S3 S4 S5) > > ACPI: Using IOAPIC for interrupt routing > > ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 > > ACPI: No dock devices found. > > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > > \_SB_.PCI0:_OSC invalid UUID > > _OSC request data:1 8 1f > > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) > > pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] > > pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] > > pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] > > pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] > > pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 > > DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics > > pci 0000:00:02.0: [8086:0046] type 0 class 0x000300 > > pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] > > pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] > > pci 0000:00:02.0: reg 20: [io 0x60b0-0x60b7] > > pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200 > > pci 0000:00:19.0: reg 10: [mem 0xf5400000-0xf541ffff] > > pci 0000:00:19.0: reg 14: [mem 0xf5480000-0xf5480fff] > > pci 0000:00:19.0: reg 18: [io 0x6040-0x605f] > > pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > > pci 0000:00:19.0: PME# disabled > > pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 > > pci 0000:00:1a.0: reg 10: [mem 0xf5470000-0xf54703ff] > > pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > > pci 0000:00:1a.0: PME# disabled > > pci 0000:00:1b.0: [8086:3b57] type 0 class 0x000403 > > pci 0000:00:1b.0: reg 10: [mem 0xf5460000-0xf5463fff 64bit] > > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > > pci 0000:00:1b.0: PME# disabled > > pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 > > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > > pci 0000:00:1c.0: PME# disabled > > pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 > > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > > pci 0000:00:1c.1: PME# disabled > > pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604 > > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > > pci 0000:00:1c.2: PME# disabled > > pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604 > > pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > > pci 0000:00:1c.3: PME# disabled > > pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 > > pci 0000:00:1d.0: reg 10: [mem 0xf5450000-0xf54503ff] > > pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > > pci 0000:00:1d.0: PME# disabled > > pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 > > pci 0000:00:1f.0: [8086:3b0f] type 0 class 0x000601 > > pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106 > > pci 0000:00:1f.2: reg 10: [io 0x6090-0x6097] > > pci 0000:00:1f.2: reg 14: [io 0x6080-0x6083] > > pci 0000:00:1f.2: reg 18: [io 0x6070-0x6077] > > pci 0000:00:1f.2: reg 1c: [io 0x6060-0x6063] > > pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f] > > pci 0000:00:1f.2: reg 24: [mem 0xf5440000-0xf54407ff] > > pci 0000:00:1f.2: PME# supported from D3hot > > pci 0000:00:1f.2: PME# disabled > > pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 > > pci 0000:00:1f.3: reg 10: [mem 0xf5430000-0xf54300ff 64bit] > > pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f] > > pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 > > pci 0000:00:1f.6: reg 10: [mem 0xf5420000-0xf5420fff 64bit] > > pci 0000:00:1c.0: PCI bridge to [bus 01-01] > > pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] > > pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf53fffff] > > pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > > pci 0000:02:00.0: [8086:422c] type 0 class 0x000280 > > pci 0000:02:00.0: reg 10: [mem 0xf2c00000-0xf2c01fff 64bit] > > pci 0000:02:00.0: PME# supported from D0 D3hot D3cold > > pci 0000:02:00.0: PME# disabled > > pci 0000:00:1c.1: PCI bridge to [bus 02-02] > > pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] > > pci 0000:00:1c.1: bridge window [mem 0xf2c00000-0xf3ffffff] > > pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > > pci 0000:03:00.0: [1180:e822] type 0 class 0x000805 > > pci 0000:03:00.0: reg 10: [mem 0xf1830000-0xf18300ff] > > pci 0000:03:00.0: supports D1 D2 > > pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold > > pci 0000:03:00.0: PME# disabled > > pci 0000:00:1c.2: PCI bridge to [bus 03-03] > > pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] > > pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf2bfffff] > > pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > > pci 0000:00:1c.3: PCI bridge to [bus 04-09] > > pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] > > pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf17fffff] > > pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > > pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) > > pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) > > pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) > > pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) > > pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > > pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > > pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) > > pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] > > \_SB_.PCI0:_OSC invalid UUID > > _OSC request data:1 19 1f > > ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f]) > > pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600 > > pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600 > > pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600 > > pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600 > > pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600 > > pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600 > > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) > > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) > > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) > > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) > > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > > vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > > vgaarb: loaded > > SCSI subsystem initialized > > libata version 3.00 loaded. > > usbcore: registered new interface driver usbfs > > usbcore: registered new interface driver hub > > usbcore: registered new device driver usb > > PCI: Using ACPI for IRQ routing > > PCI: pci_cache_line_size set to 64 bytes > > reserve RAM buffer: 000000000009ac00 - 000000000009ffff > > reserve RAM buffer: 00000000db65f000 - 00000000dbffffff > > NetLabel: Initializing > > NetLabel: domain hash size = 128 > > NetLabel: protocols = UNLABELED CIPSOv4 > > NetLabel: unlabeled traffic allowed by default > > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 > > hpet0: 8 comparators, 64-bit 14.318180 MHz counter > > Switching to clocksource tsc > > pnp: PnP ACPI init > > ACPI: bus type pnp registered > > pnp 00:00: [bus 00-3e] > > pnp 00:00: [io 0x0000-0x0cf7 window] > > pnp 00:00: [io 0x0cf8-0x0cff] > > pnp 00:00: [io 0x0d00-0xffff window] > > pnp 00:00: [mem 0x000a0000-0x000bffff window] > > pnp 00:00: [mem 0x000c0000-0x000c3fff window] > > pnp 00:00: [mem 0x000c4000-0x000c7fff window] > > pnp 00:00: [mem 0x000c8000-0x000cbfff window] > > pnp 00:00: [mem 0x000cc000-0x000cffff window] > > pnp 00:00: [mem 0x000d0000-0x000d3fff window] > > pnp 00:00: [mem 0x000d4000-0x000d7fff window] > > pnp 00:00: [mem 0x000d8000-0x000dbfff window] > > pnp 00:00: [mem 0x000dc000-0x000dffff window] > > pnp 00:00: [mem 0x000e0000-0x000e3fff window] > > pnp 00:00: [mem 0x000e4000-0x000e7fff window] > > pnp 00:00: [mem 0x000e8000-0x000ebfff window] > > pnp 00:00: [mem 0x000ec000-0x000effff window] > > pnp 00:00: [mem 0x000f0000-0x000fffff window] > > pnp 00:00: [mem 0xe0000000-0xfeafffff window] > > pnp 00:00: [mem 0xfed40000-0xfed44fff window] > > pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) > > pnp 00:01: [io 0x0000-0x001f] > > pnp 00:01: [io 0x0081-0x0091] > > pnp 00:01: [io 0x0093-0x009f] > > pnp 00:01: [io 0x00c0-0x00df] > > pnp 00:01: [dma 4] > > pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) > > pnp 00:02: [mem 0xff000000-0xffffffff] > > pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) > > pnp 00:03: [mem 0xfed00000-0xfed003ff] > > pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) > > pnp 00:04: [io 0x00f0] > > pnp 00:04: [irq 13] > > pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) > > pnp 00:05: [io 0x002e-0x002f] > > pnp 00:05: [io 0x004e-0x004f] > > pnp 00:05: [io 0x0061] > > pnp 00:05: [io 0x0063] > > pnp 00:05: [io 0x0065] > > pnp 00:05: [io 0x0067] > > pnp 00:05: [io 0x0070] > > pnp 00:05: [io 0x0080] > > pnp 00:05: [io 0x0092] > > pnp 00:05: [io 0x00b2-0x00b3] > > pnp 00:05: [io 0x0680-0x069f] > > pnp 00:05: [io 0x1000-0x1003] > > pnp 00:05: [io 0x1004-0x1013] > > pnp 00:05: [io 0xffff] > > pnp 00:05: [io 0x0400-0x047f] > > pnp 00:05: [io 0x0500-0x057f] > > pnp 00:05: [io 0x164e-0x164f] > > pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) > > pnp 00:06: [io 0x0070-0x0077] > > pnp 00:06: [irq 8] > > pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) > > pnp 00:07: [io 0x0060] > > pnp 00:07: [io 0x0064] > > pnp 00:07: [irq 1] > > pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) > > pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled) > > pnp 00:09: [irq 12] > > pnp 00:09: Plug and Play ACPI device, IDs DLL0410 PNP0f13 (active) > > pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] > > pnp 00:0a: [mem 0xfed10000-0xfed13fff] > > pnp 00:0a: [mem 0xfed18000-0xfed18fff] > > pnp 00:0a: [mem 0xfed19000-0xfed19fff] > > pnp 00:0a: [mem 0xf8000000-0xfbffffff] > > pnp 00:0a: [mem 0xfed20000-0xfed3ffff] > > pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled] > > pnp 00:0a: [mem 0xfed45000-0xfed8ffff] > > pnp 00:0a: [mem 0xff000000-0xffffffff] > > pnp 00:0a: [mem 0xfee00000-0xfeefffff] > > pnp 00:0a: [mem 0xf54c0000-0xf54c0fff] > > pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) > > pnp 00:0b: [irq 23] > > pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active) > > pnp 00:0c: [bus 3f] > > pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active) > > pnp: PnP ACPI: found 13 devices > > ACPI: ACPI bus type pnp unregistered > > system 00:05: [io 0x0680-0x069f] has been reserved > > system 00:05: [io 0x1000-0x1003] has been reserved > > system 00:05: [io 0x1004-0x1013] has been reserved > > system 00:05: [io 0xffff] has been reserved > > system 00:05: [io 0x0400-0x047f] has been reserved > > system 00:05: [io 0x0500-0x057f] has been reserved > > system 00:05: [io 0x164e-0x164f] has been reserved > > system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved > > system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved > > system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved > > system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved > > system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved > > system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved > > system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved > > system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved > > system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved > > system 00:0a: [mem 0xf54c0000-0xf54c0fff] has been reserved > > pci 0000:00:1c.0: BAR 15: assigned [mem 0xfe900000-0xfeafffff 64bit pref] > > pci 0000:00:1c.1: BAR 15: assigned [mem 0xfe700000-0xfe8fffff 64bit pref] > > pci 0000:00:1c.2: BAR 15: assigned [mem 0xfe500000-0xfe6fffff 64bit pref] > > pci 0000:00:1c.3: BAR 15: assigned [mem 0xfe300000-0xfe4fffff 64bit pref] > > pci 0000:00:1c.0: PCI bridge to [bus 01-01] > > pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] > > pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf53fffff] > > pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfeafffff 64bit pref] > > pci 0000:00:1c.1: PCI bridge to [bus 02-02] > > pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] > > pci 0000:00:1c.1: bridge window [mem 0xf2c00000-0xf3ffffff] > > pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe8fffff 64bit pref] > > pci 0000:00:1c.2: PCI bridge to [bus 03-03] > > pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] > > pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf2bfffff] > > pci 0000:00:1c.2: bridge window [mem 0xfe500000-0xfe6fffff 64bit pref] > > pci 0000:00:1c.3: PCI bridge to [bus 04-09] > > pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] > > pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf17fffff] > > pci 0000:00:1c.3: bridge window [mem 0xfe300000-0xfe4fffff 64bit pref] > > pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] > > pci 0000:00:1e.0: bridge window [io disabled] > > pci 0000:00:1e.0: bridge window [mem disabled] > > pci 0000:00:1e.0: bridge window [mem pref disabled] > > pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > pci 0000:00:1c.0: setting latency timer to 64 > > pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > > pci 0000:00:1c.1: setting latency timer to 64 > > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > > pci 0000:00:1c.2: setting latency timer to 64 > > pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > > pci 0000:00:1c.3: setting latency timer to 64 > > pci 0000:00:1e.0: setting latency timer to 64 > > pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > > pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > > pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > > pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff] > > pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] > > pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf53fffff] > > pci_bus 0000:01: resource 2 [mem 0xfe900000-0xfeafffff 64bit pref] > > pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] > > pci_bus 0000:02: resource 1 [mem 0xf2c00000-0xf3ffffff] > > pci_bus 0000:02: resource 2 [mem 0xfe700000-0xfe8fffff 64bit pref] > > pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] > > pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf2bfffff] > > pci_bus 0000:03: resource 2 [mem 0xfe500000-0xfe6fffff 64bit pref] > > pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] > > pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf17fffff] > > pci_bus 0000:04: resource 2 [mem 0xfe300000-0xfe4fffff 64bit pref] > > pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] > > pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] > > pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] > > pci_bus 0000:0a: resource 7 [mem 0xe0000000-0xfeafffff] > > NET: Registered protocol family 2 > > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > > TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > > TCP: Hash tables configured (established 524288 bind 65536) > > TCP reno registered > > UDP hash table entries: 2048 (order: 4, 65536 bytes) > > UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) > > NET: Registered protocol family 1 > > pci 0000:00:02.0: Boot video device > > PCI: CLS 64 bytes, default 64 > > Trying to unpack rootfs image as initramfs... > > Freeing initrd memory: 12580k freed > > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > > Placing 64MB software IO TLB between ffff8800d7400000 - ffff8800db400000 > > software IO TLB at phys 0xd7400000 - 0xdb400000 > > Simple Boot Flag at 0xf1 set to 0x1 > > audit: initializing netlink socket (disabled) > > type=2000 audit(1292439886.925:1): initialized > > HugeTLB registered 2 MB page size, pre-allocated 0 pages > > VFS: Disk quotas dquot_6.5.2 > > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > > msgmni has been set to 7641 > > SELinux: Registering netfilter hooks > > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > > io scheduler noop registered > > io scheduler deadline registered > > io scheduler cfq registered (default) > > \_SB_.PCI0:_OSC invalid UUID > > _OSC request data:1 0 1d > > \_SB_.PCI0:_OSC invalid UUID > > _OSC request data:1 0 1d > > \_SB_.PCI0:_OSC invalid UUID > > _OSC request data:1 0 1d > > \_SB_.PCI0:_OSC invalid UUID > > _OSC request data:1 0 1d > > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > > acpiphp: Slot [1] registered > > pci-stub: invalid id string "" > > ACPI: AC Adapter [AC] (off-line) > > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 > > ACPI: Lid Switch [LID] > > input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > > ACPI: Power Button [PBTN] > > input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 > > ACPI: Sleep Button [SBTN] > > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 > > ACPI: Power Button [PWRF] > > ACPI: acpi_idle registered with cpuidle > > Monitor-Mwait will be used to enter C-1 state > > Monitor-Mwait will be used to enter C-2 state > > Monitor-Mwait will be used to enter C-3 state > > Non-volatile memory driver v1.3 > > Linux agpgart interface v0.103 > > agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset > > agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable > > agpgart-intel 0000:00:00.0: detected 32768K stolen memory > > ACPI: Battery Slot [BAT0] (battery present) > > agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 > > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > ACPI: Battery Slot [BAT1] (battery absent) > > brd: module loaded > > loop: module loaded > > ahci 0000:00:1f.2: version 3.0 > > ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > > ahci 0000:00:1f.2: irq 40 for MSI/MSI-X > > ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst > > ahci 0000:00:1f.2: setting latency timer to 64 > > scsi0 : ahci > > scsi1 : ahci > > scsi2 : ahci > > scsi3 : ahci > > scsi4 : ahci > > scsi5 : ahci > > ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40 > > ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40 > > ata3: DUMMY > > ata4: DUMMY > > ata5: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440300 irq 40 > > ata6: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440380 irq 40 > > Fixed MDIO Bus: probed > > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > ehci_hcd 0000:00:1a.0: setting latency timer to 64 > > ehci_hcd 0000:00:1a.0: EHCI Host Controller > > ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > > ehci_hcd 0000:00:1a.0: debug port 2 > > ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported > > ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5470000 > > ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > usb usb1: Product: EHCI Host Controller > > usb usb1: Manufacturer: Linux 2.6.37-rc5-mainline+ ehci_hcd > > usb usb1: SerialNumber: 0000:00:1a.0 > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 3 ports detected > > ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > > ehci_hcd 0000:00:1d.0: setting latency timer to 64 > > ehci_hcd 0000:00:1d.0: EHCI Host Controller > > ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > > ehci_hcd 0000:00:1d.0: debug port 2 > > ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported > > ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf5450000 > > ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > usb usb2: Product: EHCI Host Controller > > usb usb2: Manufacturer: Linux 2.6.37-rc5-mainline+ ehci_hcd > > usb usb2: SerialNumber: 0000:00:1d.0 > > hub 2-0:1.0: USB hub found > > hub 2-0:1.0: 3 ports detected > > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > > uhci_hcd: USB Universal Host Controller Interface driver > > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > > i8042.c: Warning: Keylock active. > > serio: i8042 KBD port at 0x60,0x64 irq 1 > > serio: i8042 AUX port at 0x60,0x64 irq 12 > > mice: PS/2 mouse device common for all mice > > rtc_cmos 00:06: RTC can wake from S4 > > rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > > rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs > > device-mapper: uevent: version 1.0.3 > > device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com > > cpuidle: using governor ladder > > cpuidle: using governor menu > > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 > > usbcore: registered new interface driver usbhid > > usbhid: USB HID core driver > > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > > ip_tables: (C) 2000-2006 Netfilter Core Team > > TCP cubic registered > > Initializing XFRM netlink socket > > NET: Registered protocol family 17 > > Registering the dns_resolver key type > > PM: Hibernation image not present or could not be loaded. > > IMA: No TPM chip found, activating TPM-bypass! > > Magic number: 6:692:91 > > rtc_cmos 00:06: setting system clock to 2010-12-15 19:04:47 UTC (1292439887) > > Initalizing network drop monitor service > > ata6: SATA link down (SStatus 0 SControl 300) > > ata5: SATA link down (SStatus 0 SControl 300) > > usb 1-1: new high speed USB device using ehci_hcd and address 2 > > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > > ata2.00: ATAPI: MATSHITA DVD+/-RW UJ892, 1.04, max UDMA/100 > > ata1.00: ATA-7: SAMSUNG SSD PM800 2.5" 256GB, VBM24D1Q, max UDMA/100 > > ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA > > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > > ata1.00: configured for UDMA/100 > > scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM80 VBM2 PQ: 0 ANSI: 5 > > sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > sd 0:0:0:0: [sda] Write Protect is off > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > > ata2.00: configured for UDMA/100 > > sda: sda1 sda2 > > sd 0:0:0:0: [sda] Attached SCSI disk > > usb 1-1: New USB device found, idVendor=8087, idProduct=0020 > > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > hub 1-1:1.0: USB hub found > > scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ892 1.04 PQ: 0 ANSI: 5 > > hub 1-1:1.0: 6 ports detected > > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > > cdrom: Uniform CD-ROM driver Revision: 3.20 > > sr 1:0:0:0: Attached scsi CD-ROM sr0 > > sr 1:0:0:0: Attached scsi generic sg1 type 5 > > Freeing unused kernel memory: 924k freed > > Write protecting the kernel read-only data: 10240k > > Freeing unused kernel memory: 1672k freed > > Freeing unused kernel memory: 1944k freed > > dracut: dracut-005-5.fc13 > > dracut: rd_NO_LUKS: removing cryptoluks activation > > udev: starting version 153 > > udevd (104): /proc/104/oom_adj is deprecated, please use /proc/104/oom_score_adj instead. > > usb 2-1: new high speed USB device using ehci_hcd and address 2 > > [drm] Initialized drm 1.1.0 20060810 > > i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > i915 0000:00:02.0: setting latency timer to 64 > > usb 2-1: New USB device found, idVendor=8087, idProduct=0020 > > usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > hub 2-1:1.0: USB hub found > > hub 2-1:1.0: 8 ports detected > > i915 0000:00:02.0: irq 41 for MSI/MSI-X > > vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > > fbcon: inteldrmfb (fb0) is primary device > > usb 1-1.4: new high speed USB device using ehci_hcd and address 3 > > [drm:ironlake_crtc_enable] *ERROR* failed to enable transcoder 0 > > Console: switching to colour frame buffer device 170x48 > > fb0: inteldrmfb frame buffer device > > drm: registered panic notifier > > usb 1-1.4: New USB device found, idVendor=0461, idProduct=4db1 > > usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > > usb 1-1.4: Product: Laptop_Integrated_Webcam_2M > > usb 1-1.4: Manufacturer: CN0F5CWW7866406901WQA00 > > usb 2-1.8: new full speed USB device using ehci_hcd and address 3 > > usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800 > > usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > usb 2-1.8: Product: 5880 > > usb 2-1.8: Manufacturer: Broadcom Corp > > usb 2-1.8: SerialNumber: 0123456789ABCD > > usb 2-1.8: config 0 descriptor?? > > ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20101013/evregion-474) > > ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880113653be0), AE_TIME (20101013/psparse-537) > > ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR2] (Node ffff880113653c08), AE_TIME (20101013/psparse-537) > > ACPI Error: Method parse/execution failed [\ECRW] (Node ffff880113653d70), AE_TIME (20101013/psparse-537) > > ACPI Error: Method parse/execution failed [\ECG1] (Node ffff880113653dc0), AE_TIME (20101013/psparse-537) > > ACPI Error: Method parse/execution failed [\NEVT] (Node ffff880113655140), AE_TIME (20101013/psparse-537) > > ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880113653bb8), AE_TIME (20101013/psparse-537) > > acpi device:38: registered as cooling_device4 > > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 > > ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > > [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > > input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6 > > dracut: Starting plymouth daemon > > sdhci: Secure Digital Host Controller Interface driver > > sdhci: Copyright(c) Pierre Ossman > > sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 1) > > sdhci-pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > > sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it. > > sdhci-pci 0000:03:00.0: setting latency timer to 64 > > Registered led device: mmc0:: > > mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA > > dracut: Scanning devices sda2 for LVM logical volumes vg_gavana/lv_root vg_gavana/lv_swap > > dracut: inactive '/dev/vg_gavana/lv_root' [50.00 GiB] inherit > > dracut: inactive '/dev/vg_gavana/lv_home' [182.22 GiB] inherit > > dracut: inactive '/dev/vg_gavana/lv_swap' [5.75 GiB] inherit > > EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) > > dracut: Mounted root filesystem /dev/mapper/vg_gavana-lv_root > > dracut: Loading SELinux policy > > type=1404 audit(1292439892.295:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 > > SELinux: 2048 avtab hash slots, 205638 rules. > > SELinux: 2048 avtab hash slots, 205638 rules. > > SELinux: 9 users, 13 roles, 3365 types, 175 bools, 1 sens, 1024 cats > > SELinux: 77 classes, 205638 rules > > SELinux: Permission read_policy in class security not defined in policy. > > SELinux: Permission audit_access in class file not defined in policy. > > SELinux: Permission audit_access in class dir not defined in policy. > > SELinux: Permission execmod in class dir not defined in policy. > > SELinux: Permission audit_access in class lnk_file not defined in policy. > > SELinux: Permission open in class lnk_file not defined in policy. > > SELinux: Permission execmod in class lnk_file not defined in policy. > > SELinux: Permission audit_access in class chr_file not defined in policy. > > SELinux: Permission audit_access in class blk_file not defined in policy. > > SELinux: Permission execmod in class blk_file not defined in policy. > > SELinux: Permission audit_access in class sock_file not defined in policy. > > SELinux: Permission execmod in class sock_file not defined in policy. > > SELinux: Permission audit_access in class fifo_file not defined in policy. > > SELinux: Permission execmod in class fifo_file not defined in policy. > > SELinux: the above unknown classes and permissions will be allowed > > SELinux: Completing initialization. > > SELinux: Setting up existing superblocks. > > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > > SELinux: initialized (dev proc, type proc), uses genfs_contexts > > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > > SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs > > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs > > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > > SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts > > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > > SELinux: initialized (dev dm-0, type ext4), uses xattr > > type=1403 audit(1292439892.882:3): policy loaded auid=4294967295 ses=4294967295 > > dracut: > > dracut: Switching root > > readahead: starting > > udev: starting version 153 > > type=1400 audit(1292439894.129:4): avc: denied { mmap_zero } for pid=412 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect > > iTCO_vendor_support: vendor-support=0 > > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 > > iTCO_wdt: Found a QS57 TCO device (Version=2, TCOBASE=0x0460) > > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > > input: PC Speaker as /devices/platform/pcspkr/input/input7 > > i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > > ACPI: resource 0000:00:1f.3 [io 0x6000-0x601f] conflicts with ACPI region SMBI [mem 0x00006000-0x0000600f disabled] > > ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > > wmi: Mapper loaded > > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > > dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > > microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9 > > e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 > > e1000e: Copyright (c) 1999 - 2010 Intel Corporation. > > e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > > e1000e 0000:00:19.0: setting latency timer to 64 > > e1000e 0000:00:19.0: irq 42 for MSI/MSI-X > > input: Dell WMI hotkeys as /devices/virtual/input/input8 > > microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9 > > microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9 > > microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9 > > microcode: Microcode Update Driver: v2.00 , Peter Oruba > > cfg80211: Calling CRDA to update world regulatory domain > > microcode: CPU0 updated to revision 0xc, date = 2010-06-10 > > microcode: CPU1 updated to revision 0xc, date = 2010-06-10 > > microcode: CPU2 updated to revision 0xc, date = 2010-06-10 > > microcode: CPU3 updated to revision 0xc, date = 2010-06-10 > > e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:e0:54:fd > > e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection > > e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 4041ff-0ff > > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X > > HDA Intel 0000:00:1b.0: setting latency timer to 64 > > ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) > > ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) > > ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) > > ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0 > > ALSA sound/pci/hda/hda_codec.c:4632: inputs: > > ALSA sound/pci/hda/hda_codec.c:4638: > > ALSA sound/pci/hda/patch_sigmatel.c:3042: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) > > cfg80211: World regulatory domain updated: > > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > > (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > > (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > > (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > > (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > > (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > > input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 > > input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 > > input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 > > input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 > > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d > > iwlagn: Copyright(c) 2003-2010 Intel Corporation > > iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > > iwlagn 0000:02:00.0: setting latency timer to 64 > > iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 > > iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6 > > iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels > > iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X > > iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 > > cfg80211: Calling CRDA for country: RU > > ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' > > cfg80211: Regulatory domain changed to country: RU > > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > > (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) > > (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm) > > EXT4-fs (dm-0): re-mounted. Opts: (null) > > EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) > > SELinux: initialized (dev sda1, type ext4), uses xattr > > EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) > > SELinux: initialized (dev dm-2, type ext4), uses xattr > > Adding 6029308k swap on /dev/mapper/vg_gavana-lv_swap. Priority:-1 extents:1 across:6029308k > > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > > NET: Registered protocol family 10 > > lo: Disabled Privacy Extensions > > ip6_tables: (C) 2000-2006 Netfilter Core Team > > e1000e 0000:00:19.0: irq 42 for MSI/MSI-X > > e1000e 0000:00:19.0: irq 42 for MSI/MSI-X > > ADDRCONF(NETDEV_UP): eth0: link is not ready > > RPC: Registered udp transport module. > > RPC: Registered tcp transport module. > > RPC: Registered tcp NFSv4.1 backchannel transport module. > > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts > > fuse init (API version 7.15) > > SELinux: initialized (dev fuse, type fuse), uses genfs_contexts > > wmi: Mapper unloaded > > iwlagn 0000:02:00.0: PCI INT A disabled > > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d > > iwlagn: Copyright(c) 2003-2010 Intel Corporation > > iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > > iwlagn 0000:02:00.0: setting latency timer to 64 > > iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 > > iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6 > > iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels > > iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X > > iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 > > ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' > > iwlagn 0000:02:00.0: PCI INT A disabled > > iwlcore: Unknown parameter `debug' > > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d > > iwlagn: Copyright(c) 2003-2010 Intel Corporation > > ieee80211 phy2: U iwl_pci_probe *** LOAD DRIVER *** > > iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > > iwlagn 0000:02:00.0: setting latency timer to 64 > > ieee80211 phy2: U iwl_pci_probe pci_resource_len = 0x00002000 > > ieee80211 phy2: U iwl_pci_probe pci_resource_base = ffffc90005b14000 > > ieee80211 phy2: U iwl_hw_detect HW Revision ID = 0x35 > > iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 > > ieee80211 phy2: U iwl_prepare_card_hw iwl_prepare_card_hw enter > > ieee80211 phy2: U iwl_set_hw_ready hardware ready > > ieee80211 phy2: U iwl_eeprom_init NVM size = 2048 > > ieee80211 phy2: U iwl_apm_init Init card's basic functions > > ieee80211 phy2: U iwl_eeprom_verify_signature EEPROM signature=0x00000001 > > ieee80211 phy2: U iwl_eeprom_init NVM Type: OTP, version: 0x436 > > ieee80211 phy2: U iwl_apm_stop Stop card, put in low power state > > ieee80211 phy2: U iwl_apm_stop_master stop master > > iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6 > > ieee80211 phy2: U iwl_pci_probe MAC address: 00:27:10:46:ad:04 > > ieee80211 phy2: U iwlagn_set_rxon_chain rx_chain=0x240C active=2 idle=1 > > ieee80211 phy2: U iwl_init_channel_map Initializing regulatory info from EEPROM > > ieee80211 phy2: U iwl_init_channel_map Parsing data for 56 channels. > > ieee80211 phy2: U iwl_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 36 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 40 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 44 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 48 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 52 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 56 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 60 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 64 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 100 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 104 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 108 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 112 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 116 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 120 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 124 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 128 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 132 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 136 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 140 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic > > ieee80211 phy2: U iwl_init_channel_map Ch. 149 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 153 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 157 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 161 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_init_channel_map Ch. 165 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 36 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 40 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 44 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 48 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 52 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 56 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 60 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 64 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 100 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 104 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 108 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 112 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 116 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 120 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 124 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 128 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 132 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 136 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 149 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 153 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 157 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 161 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 14 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 11 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 5 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 6 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 7 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 11 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 9 dB chain_c: 9 dB mimo2: 8 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 9 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 9 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 9 dB chain_c: 10 dB mimo2: 8 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 11 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 13 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 5 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 10 dB chain_c: 10 dB mimo2: 9 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 10 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 13 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 13 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 11 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB > > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 11 dB mimo3: 0 dB > > ieee80211 phy2: U iwlcore_init_geos Channel 1 Freq=2412[2.4GHz] valid flag=0x20 > > ieee80211 phy2: U iwlcore_init_geos Channel 2 Freq=2417[2.4GHz] valid flag=0x20 > > ieee80211 phy2: U iwlcore_init_geos Channel 3 Freq=2422[2.4GHz] valid flag=0x20 > > ieee80211 phy2: U iwlcore_init_geos Channel 4 Freq=2427[2.4GHz] valid flag=0x20 > > ieee80211 phy2: U iwlcore_init_geos Channel 5 Freq=2432[2.4GHz] valid flag=0x0 > > ieee80211 phy2: U iwlcore_init_geos Channel 6 Freq=2437[2.4GHz] valid flag=0x0 > > ieee80211 phy2: U iwlcore_init_geos Channel 7 Freq=2442[2.4GHz] valid flag=0x0 > > ieee80211 phy2: U iwlcore_init_geos Channel 8 Freq=2447[2.4GHz] valid flag=0x10 > > ieee80211 phy2: U iwlcore_init_geos Channel 9 Freq=2452[2.4GHz] valid flag=0x10 > > ieee80211 phy2: U iwlcore_init_geos Channel 10 Freq=2457[2.4GHz] valid flag=0x10 > > ieee80211 phy2: U iwlcore_init_geos Channel 11 Freq=2462[2.4GHz] valid flag=0x10 > > ieee80211 phy2: U iwlcore_init_geos Channel 12 Freq=2467[2.4GHz] valid flag=0x36 > > ieee80211 phy2: U iwlcore_init_geos Channel 13 Freq=2472[2.4GHz] valid flag=0x36 > > ieee80211 phy2: U iwlcore_init_geos Channel 36 Freq=5180[5.2GHz] valid flag=0x26 > > ieee80211 phy2: U iwlcore_init_geos Channel 40 Freq=5200[5.2GHz] valid flag=0x16 > > ieee80211 phy2: U iwlcore_init_geos Channel 44 Freq=5220[5.2GHz] valid flag=0x26 > > ieee80211 phy2: U iwlcore_init_geos Channel 48 Freq=5240[5.2GHz] valid flag=0x16 > > ieee80211 phy2: U iwlcore_init_geos Channel 52 Freq=5260[5.2GHz] valid flag=0x2E > > ieee80211 phy2: U iwlcore_init_geos Channel 56 Freq=5280[5.2GHz] valid flag=0x1E > > ieee80211 phy2: U iwlcore_init_geos Channel 60 Freq=5300[5.2GHz] valid flag=0x2E > > ieee80211 phy2: U iwlcore_init_geos Channel 64 Freq=5320[5.2GHz] valid flag=0x1E > > ieee80211 phy2: U iwlcore_init_geos Channel 100 Freq=5500[5.2GHz] valid flag=0x2E > > ieee80211 phy2: U iwlcore_init_geos Channel 104 Freq=5520[5.2GHz] valid flag=0x1E > > ieee80211 phy2: U iwlcore_init_geos Channel 108 Freq=5540[5.2GHz] valid flag=0x2E > > ieee80211 phy2: U iwlcore_init_geos Channel 112 Freq=5560[5.2GHz] valid flag=0x1E > > ieee80211 phy2: U iwlcore_init_geos Channel 116 Freq=5580[5.2GHz] valid flag=0x2E > > ieee80211 phy2: U iwlcore_init_geos Channel 120 Freq=5600[5.2GHz] valid flag=0x1E > > ieee80211 phy2: U iwlcore_init_geos Channel 124 Freq=5620[5.2GHz] valid flag=0x2E > > ieee80211 phy2: U iwlcore_init_geos Channel 128 Freq=5640[5.2GHz] valid flag=0x1E > > ieee80211 phy2: U iwlcore_init_geos Channel 132 Freq=5660[5.2GHz] valid flag=0x2E > > ieee80211 phy2: U iwlcore_init_geos Channel 136 Freq=5680[5.2GHz] valid flag=0x1E > > ieee80211 phy2: U iwlcore_init_geos Channel 140 Freq=5700[5.2GHz] valid flag=0x3E > > ieee80211 phy2: U iwlcore_init_geos Channel 149 Freq=5745[5.2GHz] valid flag=0x26 > > ieee80211 phy2: U iwlcore_init_geos Channel 153 Freq=5765[5.2GHz] valid flag=0x16 > > ieee80211 phy2: U iwlcore_init_geos Channel 157 Freq=5785[5.2GHz] valid flag=0x26 > > ieee80211 phy2: U iwlcore_init_geos Channel 161 Freq=5805[5.2GHz] valid flag=0x16 > > ieee80211 phy2: U iwlcore_init_geos Channel 165 Freq=5825[5.2GHz] valid flag=0x36 > > iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels > > iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X > > ieee80211 phy2: U iwl_request_firmware attempting to load firmware 'iwlwifi-6000-4.ucode' > > ieee80211 phy2: U iwl_ucode_callback Loaded firmware file 'iwlwifi-6000-4.ucode' (454608 bytes). > > iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 > > ieee80211 phy2: U iwl_ucode_callback f/w package hdr ucode version raw = 0x9dd0401 > > ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime inst size = 145616 > > ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime data size = 81920 > > ieee80211 phy2: U iwl_ucode_callback f/w package hdr init inst size = 145124 > > ieee80211 phy2: U iwl_ucode_callback f/w package hdr init data size = 81920 > > ieee80211 phy2: U iwl_ucode_callback f/w package hdr boot inst size = 0 > > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode instr len 145616 > > ieee80211 phy2: U iwl_ucode_callback uCode instr buf vaddr = 0xffff8800c91c0000, paddr = 0xc91c0000 > > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode data len 81920 > > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init instr len 145124 > > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init data len 81920 > > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) boot instr len 0 > > ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs' > > 4: phy2: Wireless LAN > > Soft blocked: no > > Hard blocked: yes > > > 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) > > Subsystem: Dell Device 0410 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0 > > Capabilities: [e0] Vendor Specific Information: Len=0c > > > > 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) > > Subsystem: Dell Device 0410 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at f0000000 (64-bit, non-prefetchable) > > Region 2: Memory at e0000000 (64-bit, prefetchable) > > Region 4: I/O ports at 60b0 > > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > > Address: fee0500c Data: 4169 > > Capabilities: [d0] Power Management version 2 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [a4] PCI Advanced Features > > AFCap: TP+ FLR+ > > AFCtrl: FLR- > > AFStatus: TP- > > Kernel modules: i915 > > > > 00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05) > > Subsystem: Dell Device 0410 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 5 > > Region 0: Memory at f5400000 (32-bit, non-prefetchable) > > Region 1: Memory at f5480000 (32-bit, non-prefetchable) > > Region 2: I/O ports at 6040 > > Capabilities: [c8] Power Management version 2 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > > Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > > Address: 00000000fee0400c Data: 41a1 > > Capabilities: [e0] PCI Advanced Features > > AFCap: TP+ FLR+ > > AFCtrl: FLR- > > AFStatus: TP- > > Kernel modules: e1000e > > > > 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) > > Subsystem: Dell Device 0410 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at f5470000 (32-bit, non-prefetchable) > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [58] Debug port: BAR=1 offset=00a0 > > Capabilities: [98] PCI Advanced Features > > AFCap: TP+ FLR+ > > AFCtrl: FLR- > > AFStatus: TP- > > > > 00:1b.0 Audio device: Intel Corporation Device 3b57 (rev 05) > > Subsystem: Dell Device 0410 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 3 > > Region 0: Memory at f5460000 (64-bit, non-prefetchable) > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ > > Address: 00000000fee0500c Data: 4189 > > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE- FLReset+ > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us > > ClockPM- Surprise- LLActRep- BwNot- > > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > > Kernel modules: snd-hda-intel > > > > 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > I/O behind bridge: 00005000-00005fff > > Memory behind bridge: f4000000-f53fffff > > Prefetchable memory behind bridge: 00000000fe900000-00000000feafffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > > ClockPM- Surprise- LLActRep+ BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > > Slot #0, PowerLimit 10.000W; Interlock- NoCompl+ > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > > Changed: MRL- PresDet- LinkState- > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- > > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > Compliance De-emphasis: -6dB > > LnkSta2: Current De-emphasis Level: -6dB > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > > Address: 00000000 Data: 0000 > > Capabilities: [90] Subsystem: Dell Device 0410 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Kernel modules: shpchp > > > > 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > > I/O behind bridge: 00004000-00004fff > > Memory behind bridge: f2c00000-f3ffffff > > Prefetchable memory behind bridge: 00000000fe700000-00000000fe8fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us > > ClockPM- Surprise- LLActRep+ BwNot- > > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > > Slot #1, PowerLimit 10.000W; Interlock- NoCompl+ > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > > Changed: MRL- PresDet+ LinkState+ > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- > > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > Compliance De-emphasis: -6dB > > LnkSta2: Current De-emphasis Level: -6dB > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > > Address: 00000000 Data: 0000 > > Capabilities: [90] Subsystem: Dell Device 0410 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Kernel modules: shpchp > > > > 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > > I/O behind bridge: 00003000-00003fff > > Memory behind bridge: f1800000-f2bfffff > > Prefetchable memory behind bridge: 00000000fe500000-00000000fe6fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us > > ClockPM- Surprise- LLActRep+ BwNot- > > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > > Slot #2, PowerLimit 10.000W; Interlock- NoCompl+ > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > > Changed: MRL- PresDet+ LinkState+ > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- > > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > Compliance De-emphasis: -6dB > > LnkSta2: Current De-emphasis Level: -6dB > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > > Address: 00000000 Data: 0000 > > Capabilities: [90] Subsystem: Dell Device 0410 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Kernel modules: shpchp > > > > 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) (prog-if 00 [Normal decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 64 bytes > > Bus: primary=00, secondary=04, subordinate=09, sec-latency=0 > > I/O behind bridge: 00002000-00002fff > > Memory behind bridge: f0400000-f17fffff > > Prefetchable memory behind bridge: 00000000fe300000-00000000fe4fffff > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > > ExtTag- RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > > LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us > > ClockPM- Surprise- LLActRep+ BwNot- > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > > Slot #3, PowerLimit 10.000W; Interlock- NoCompl+ > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- > > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > > Changed: MRL- PresDet- LinkState- > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > > RootCap: CRSVisible- > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd- > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- > > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > Compliance De-emphasis: -6dB > > LnkSta2: Current De-emphasis Level: -6dB > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > > Address: 00000000 Data: 0000 > > Capabilities: [90] Subsystem: Dell Device 0410 > > Capabilities: [a0] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Kernel modules: shpchp > > > > 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) > > Subsystem: Dell Device 0410 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- > Latency: 0 > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at f5450000 (32-bit, non-prefetchable) > > Capabilities: [50] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [58] Debug port: BAR=1 offset=00a0 > > Capabilities: [98] PCI Advanced Features > > AFCap: TP+ FLR+ > > AFCtrl: FLR- > > AFStatus: TP- > > > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode]) > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0 > > Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 > > I/O behind bridge: 0000f000-00000fff > > Memory behind bridge: fff00000-000fffff > > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [50] Subsystem: Dell Device 0410 > > > > 00:1f.0 ISA bridge: Intel Corporation 5 Series/3400 Series Chipset LPC Interface Controller (rev 05) > > Subsystem: Dell Device 0410 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- > Latency: 0 > > Capabilities: [e0] Vendor Specific Information: Len=10 > > Kernel modules: iTCO_wdt > > > > 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0]) > > Subsystem: Dell Device 0410 > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- > Latency: 0 > > Interrupt: pin C routed to IRQ 10 > > Region 0: I/O ports at 6090 > > Region 1: I/O ports at 6080 > > Region 2: I/O ports at 6070 > > Region 3: I/O ports at 6060 > > Region 4: I/O ports at 6020 > > Region 5: Memory at f5440000 (32-bit, non-prefetchable) > > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > > Address: fee0500c Data: 4161 > > Capabilities: [70] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 > > Capabilities: [b0] PCI Advanced Features > > AFCap: TP+ FLR+ > > AFCtrl: FLR- > > AFStatus: TP- > > > > 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) > > Subsystem: Dell Device 0410 > > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- > Interrupt: pin C routed to IRQ 10 > > Region 0: Memory at f5430000 (64-bit, non-prefetchable) > > Region 4: I/O ports at 6000 > > Kernel modules: i2c-i801 > > > > 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) > > Subsystem: Dell Device 0410 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0 > > Interrupt: pin C routed to IRQ 10 > > Region 0: Memory at f5420000 (64-bit, non-prefetchable) > > Capabilities: [50] Power Management version 3 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- > > Address: 00000000 Data: 0000 > > > > 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35) > > Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 11 > > Region 0: Memory at f2c00000 (64-bit, non-prefetchable) > > Capabilities: [c8] Power Management version 3 > > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > > Address: 00000000fee0f00c Data: 41b1 > > Capabilities: [e0] Express (v1) Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us > > ClockPM+ Surprise- LLActRep- BwNot- > > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > Kernel modules: iwlagn > > > > 03:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01) > > Subsystem: Dell Device 0410 > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- > Latency: 0, Cache Line Size: 64 bytes > > Interrupt: pin A routed to IRQ 10 > > Region 0: Memory at f1830000 (32-bit, non-prefetchable) > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > > Address: 0000000000000000 Data: 0000 > > Capabilities: [78] Power Management version 3 > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- > > Capabilities: [80] Express (v1) Endpoint, MSI 00 > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > > ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- > > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > > MaxPayload 128 bytes, MaxReadReq 512 bytes > > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- > > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us > > ClockPM+ Surprise- LLActRep- BwNot- > > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > Kernel modules: sdhci-pci > > > > > -- > John W. Linville Someday the world will need a hero, and you > linville@tuxdriver.com might be all we have. Be ready.