Return-path: Received: from he.sipsolutions.net ([78.46.109.217]:53766 "EHLO sipsolutions.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754965Ab0LBIpM (ORCPT ); Thu, 2 Dec 2010 03:45:12 -0500 Subject: [RFC 5/5 v2] cfg80211/mac80211: add mesh join/leave commands From: Johannes Berg To: linux-wireless@vger.kernel.org Cc: Javier Cardona , Steve Derosier , devel@lists.open80211s.org In-Reply-To: <20101201210226.159495600@sipsolutions.net> References: <20101201205939.009530439@sipsolutions.net> <20101201210226.159495600@sipsolutions.net> Content-Type: text/plain; charset="UTF-8" Date: Thu, 02 Dec 2010 09:45:10 +0100 Message-ID: <1291279510.3481.17.camel@jlt3.sipsolutions.net> Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Johannes Berg Instead of tying mesh activity to interface up, add join and leave commands for mesh. Since we must be backward compatible, let cfg80211 handle joining a mesh if a mesh ID was pre-configured when the device goes up. Note that this therefore must modify mac80211 as well since mac80211 needs to lose the logic to start the mesh on interface up. We now allow querying mesh parameters before the mesh is connected, which simply returns defaults. Setting them (internally renamed to "update") is only allowed while connected. Specify them with the new mesh join command instead where needed. Signed-off-by: Johannes Berg --- v2: - fix join on netdev up (pointed out by Javier) - only require mesh ID (pointed out by Javier) - more sanity checking around get/set_mesh_params - rename set_mesh_params to update_mesh_params, disallow calling it before connected to mesh - add some mesh interface type checks - introduce mesh_setup struct for static config I have lightly tested this. You can find a new test branch of iw that includes support for the new commands here: http://git.sipsolutions.net/?p=iw.git;a=shortlog;h=refs/heads/mesh I think this is about ready, maybe with some minor issues still. I'd appreciate if you could review and test it, and then we can add the IE and path selection protocols to the mesh_setup struct and the iw mesh join command. include/linux/nl80211.h | 8 ++ include/net/cfg80211.h | 38 +++++++++--- net/mac80211/cfg.c | 39 +++++++++--- net/mac80211/ieee80211_i.h | 13 ---- net/mac80211/iface.c | 14 ---- net/mac80211/mesh.c | 20 ------ net/mac80211/mesh.h | 23 ------- net/wireless/Makefile | 2 net/wireless/core.c | 15 ++++ net/wireless/core.h | 13 ++++ net/wireless/mesh.c | 134 ++++++++++++++++++++++++++++++++++++++++++++ net/wireless/nl80211.c | 137 ++++++++++++++++++++++++++++++++++++++------- net/wireless/util.c | 1 13 files changed, 346 insertions(+), 111 deletions(-) --- wireless-testing.orig/include/linux/nl80211.h 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/include/linux/nl80211.h 2010-12-02 09:38:22.000000000 +0100 @@ -394,6 +394,11 @@ * * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. * + * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial + * mesh config parameters may be given. + * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the + * network is determined by the network interface. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -500,6 +505,9 @@ enum nl80211_commands { NL80211_CMD_FRAME_WAIT_CANCEL, + NL80211_CMD_JOIN_MESH, + NL80211_CMD_LEAVE_MESH, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ --- wireless-testing.orig/include/net/cfg80211.h 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/include/net/cfg80211.h 2010-12-02 09:38:22.000000000 +0100 @@ -258,13 +258,9 @@ struct ieee80211_supported_band { /** * struct vif_params - describes virtual interface parameters - * @mesh_id: mesh ID to use - * @mesh_id_len: length of the mesh ID * @use_4addr: use 4-address frames */ struct vif_params { - u8 *mesh_id; - int mesh_id_len; int use_4addr; }; @@ -615,6 +611,11 @@ struct bss_parameters { int ap_isolate; }; +/* + * struct mesh_config - 802.11s mesh configuration + * + * These parameters can be changed while the mesh is active. + */ struct mesh_config { /* Timeouts in ms */ /* Mesh plink management parameters */ @@ -636,6 +637,18 @@ struct mesh_config { }; /** + * struct mesh_setup - 802.11s mesh setup configuration + * @mesh_id: the mesh ID + * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes + * + * These parameters are fixed when the mesh is created. + */ +struct mesh_setup { + const u8 *mesh_id; + u8 mesh_id_len; +}; + +/** * struct ieee80211_txq_params - TX queue parameters * @queue: TX queue identifier (NL80211_TXQ_Q_*) * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled @@ -1076,7 +1089,7 @@ struct cfg80211_pmksa { * * @get_mesh_params: Put the current mesh parameters into *params * - * @set_mesh_params: Set mesh parameters. + * @update_mesh_params: Update mesh parameters on a running mesh. * The mask is a bitfield which tells us which parameters to * set, and which to leave alone. * @@ -1220,9 +1233,14 @@ struct cfg80211_ops { int (*get_mesh_params)(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf); - int (*set_mesh_params)(struct wiphy *wiphy, - struct net_device *dev, - const struct mesh_config *nconf, u32 mask); + int (*update_mesh_params)(struct wiphy *wiphy, + struct net_device *dev, u32 mask, + const struct mesh_config *nconf); + int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev, + const struct mesh_config *conf, + const struct mesh_setup *setup); + int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); + int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, struct bss_parameters *params); @@ -1638,6 +1656,8 @@ struct cfg80211_cached_keys; * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code + * @mesh_id_len: (private) Used by the internal configuration code + * @mesh_id_up_len: (private) Used by the internal configuration code * @wext: (private) Used by the internal wireless extensions compat code * @use_4addr: indicates 4addr mode is used on this interface, must be * set by driver (if supported) on add_interface BEFORE registering the @@ -1667,7 +1687,7 @@ struct wireless_dev { /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; - u8 ssid_len; + u8 ssid_len, mesh_id_len, mesh_id_up_len; enum { CFG80211_SME_IDLE, CFG80211_SME_CONNECTING, --- wireless-testing.orig/net/wireless/Makefile 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/wireless/Makefile 2010-12-02 09:38:22.000000000 +0100 @@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o obj-$(CONFIG_WEXT_PRIV) += wext-priv.o cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o -cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o +cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o --- wireless-testing.orig/net/wireless/core.h 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/wireless/core.h 2010-12-02 09:38:22.000000000 +0100 @@ -285,6 +285,19 @@ void __cfg80211_ibss_joined(struct net_d int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev); +/* mesh */ +extern const struct mesh_config default_mesh_config; +int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf); +int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf); +int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev); + /* MLME */ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, struct net_device *dev, --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ wireless-testing/net/wireless/mesh.c 2010-12-02 09:38:22.000000000 +0100 @@ -0,0 +1,134 @@ +#include +#include +#include "core.h" + +/* Default values, timeouts in ms */ +#define MESH_TTL 31 +#define MESH_MAX_RETR 3 +#define MESH_RET_T 100 +#define MESH_CONF_T 100 +#define MESH_HOLD_T 100 + +#define MESH_PATH_TIMEOUT 5000 +/* Minimum interval between two consecutive PREQs originated by the same + * interface + */ +#define MESH_PREQ_MIN_INT 10 +#define MESH_DIAM_TRAVERSAL_TIME 50 +/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before + * timing out. This way it will remain ACTIVE and no data frames will be + * unnecesarily held in the pending queue. + */ +#define MESH_PATH_REFRESH_TIME 1000 +#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME) + +/* Default maximum number of established plinks per interface */ +#define MESH_MAX_ESTAB_PLINKS 32 + +#define MESH_MAX_PREQ_RETRIES 4 + + +const struct mesh_config default_mesh_config = { + .dot11MeshRetryTimeout = MESH_RET_T, + .dot11MeshConfirmTimeout = MESH_CONF_T, + .dot11MeshHoldingTimeout = MESH_HOLD_T, + .dot11MeshMaxRetries = MESH_MAX_RETR, + .dot11MeshTTL = MESH_TTL, + .auto_open_plinks = true, + .dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS, + .dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT, + .dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT, + .dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME, + .dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES, + .path_refresh_time = MESH_PATH_REFRESH_TIME, + .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT, +}; + + +int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct mesh_setup setup = { + .mesh_id = mesh_id, + .mesh_id_len = mesh_id_len, + }; + int err; + + BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN); + + ASSERT_WDEV_LOCK(wdev); + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (wdev->mesh_id_len) + return -EALREADY; + + if (!mesh_id_len) + return -EINVAL; + + if (!rdev->ops->join_mesh) + return -EOPNOTSUPP; + + err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, &setup); + if (!err) { + memcpy(wdev->ssid, mesh_id, mesh_id_len); + wdev->mesh_id_len = mesh_id_len; + } + + return err; +} + +int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + wdev_lock(wdev); + err = __cfg80211_join_mesh(rdev, dev, mesh_id, mesh_id_len, conf); + wdev_unlock(wdev); + + return err; +} + +static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + ASSERT_WDEV_LOCK(wdev); + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (!rdev->ops->leave_mesh) + return -EOPNOTSUPP; + + if (!wdev->mesh_id_len) + return -ENOTCONN; + + err = rdev->ops->leave_mesh(&rdev->wiphy, dev); + if (!err) + wdev->mesh_id_len = 0; + return err; +} + +int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + wdev_lock(wdev); + err = __cfg80211_leave_mesh(rdev, dev); + wdev_unlock(wdev); + + return err; +} --- wireless-testing.orig/net/wireless/nl80211.c 2010-12-02 09:38:20.000000000 +0100 +++ wireless-testing/net/wireless/nl80211.c 2010-12-02 09:38:31.000000000 +0100 @@ -661,13 +661,14 @@ static int nl80211_send_wiphy(struct sk_ CMD(add_beacon, NEW_BEACON); CMD(add_station, NEW_STATION); CMD(add_mpath, NEW_MPATH); - CMD(set_mesh_params, SET_MESH_PARAMS); + CMD(update_mesh_params, SET_MESH_PARAMS); CMD(change_bss, SET_BSS); CMD(auth, AUTHENTICATE); CMD(assoc, ASSOCIATE); CMD(deauth, DEAUTHENTICATE); CMD(disassoc, DISASSOCIATE); CMD(join_ibss, JOIN_IBSS); + CMD(join_mesh, JOIN_MESH); CMD(set_pmksa, SET_PMKSA); CMD(del_pmksa, DEL_PMKSA); CMD(flush_pmksa, FLUSH_PMKSA); @@ -1324,11 +1325,21 @@ static int nl80211_set_interface(struct } if (info->attrs[NL80211_ATTR_MESH_ID]) { + struct wireless_dev *wdev = dev->ieee80211_ptr; + if (ntype != NL80211_IFTYPE_MESH_POINT) return -EINVAL; - params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]); - params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]); - change = true; + if (netif_running(dev)) + return -EBUSY; + + wdev_lock(wdev); + BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != + IEEE80211_MAX_MESH_ID_LEN); + wdev->mesh_id_up_len = + nla_len(info->attrs[NL80211_ATTR_MESH_ID]); + memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]), + wdev->mesh_id_up_len); + wdev_unlock(wdev); } if (info->attrs[NL80211_ATTR_4ADDR]) { @@ -1388,12 +1399,6 @@ static int nl80211_new_interface(struct !(rdev->wiphy.interface_modes & (1 << type))) return -EOPNOTSUPP; - if (type == NL80211_IFTYPE_MESH_POINT && - info->attrs[NL80211_ATTR_MESH_ID]) { - params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]); - params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]); - } - if (info->attrs[NL80211_ATTR_4ADDR]) { params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]); err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type); @@ -1410,6 +1415,20 @@ static int nl80211_new_interface(struct if (IS_ERR(dev)) return PTR_ERR(dev); + if (type == NL80211_IFTYPE_MESH_POINT && + info->attrs[NL80211_ATTR_MESH_ID]) { + struct wireless_dev *wdev = dev->ieee80211_ptr; + + wdev_lock(wdev); + BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != + IEEE80211_MAX_MESH_ID_LEN); + wdev->mesh_id_up_len = + nla_len(info->attrs[NL80211_ATTR_MESH_ID]); + memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]), + wdev->mesh_id_up_len); + wdev_unlock(wdev); + } + return 0; } @@ -2543,21 +2562,32 @@ static int nl80211_req_set_reg(struct sk } static int nl80211_get_mesh_params(struct sk_buff *skb, - struct genl_info *info) + struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; - struct mesh_config cur_params; - int err; struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct mesh_config cur_params; + int err = 0; void *hdr; struct nlattr *pinfoattr; struct sk_buff *msg; + if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + if (!rdev->ops->get_mesh_params) return -EOPNOTSUPP; - /* Get the mesh params */ - err = rdev->ops->get_mesh_params(&rdev->wiphy, dev, &cur_params); + wdev_lock(wdev); + /* If not connected, get default parameters */ + if (!wdev->mesh_id_len) + memcpy(&cur_params, &default_mesh_config, sizeof(cur_params)); + else + err = rdev->ops->get_mesh_params(&rdev->wiphy, dev, + &cur_params); + wdev_unlock(wdev); + if (err) return err; @@ -2700,23 +2730,37 @@ do {\ #undef FILL_IN_MESH_PARAM_IF_SET } -static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info) +static int nl80211_update_mesh_params(struct sk_buff *skb, + struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; struct mesh_config cfg; u32 mask; int err; - if (!rdev->ops->set_mesh_params) + if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (!rdev->ops->update_mesh_params) return -EOPNOTSUPP; err = nl80211_parse_mesh_params(info, &cfg, &mask); if (err) return err; - /* Apply changes */ - return rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask); + wdev_lock(wdev); + if (!wdev->mesh_id_len) + err = -ENOLINK; + + if (!err) + err = rdev->ops->update_mesh_params(&rdev->wiphy, dev, + mask, &cfg); + + wdev_unlock(wdev); + + return err; } static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) @@ -4500,6 +4544,41 @@ out: return err; } +static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct mesh_config cfg; + int err; + + /* start with default */ + memcpy(&cfg, &default_mesh_config, sizeof(cfg)); + + if (info->attrs[NL80211_ATTR_MESH_PARAMS]) { + /* and parse parameters if given */ + err = nl80211_parse_mesh_params(info, &cfg, NULL); + if (err) + return err; + } + + if (!info->attrs[NL80211_ATTR_MESH_ID] || + !nla_len(info->attrs[NL80211_ATTR_MESH_ID])) + return -EINVAL; + + return cfg80211_join_mesh(rdev, dev, + nla_data(info->attrs[NL80211_ATTR_MESH_ID]), + nla_len(info->attrs[NL80211_ATTR_MESH_ID]), + &cfg); +} + +static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + + return cfg80211_leave_mesh(rdev, dev); +} + #define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_RTNL 0x04 @@ -4764,10 +4843,10 @@ static struct genl_ops nl80211_ops[] = { }, { .cmd = NL80211_CMD_SET_MESH_PARAMS, - .doit = nl80211_set_mesh_params, + .doit = nl80211_update_mesh_params, .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, - .internal_flags = NL80211_FLAG_NEED_NETDEV | + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | NL80211_FLAG_NEED_RTNL, }, { @@ -4982,6 +5061,22 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_JOIN_MESH, + .doit = nl80211_join_mesh, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, + { + .cmd = NL80211_CMD_LEAVE_MESH, + .doit = nl80211_leave_mesh, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { --- wireless-testing.orig/net/wireless/core.c 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/wireless/core.c 2010-12-02 09:38:22.000000000 +0100 @@ -332,6 +332,7 @@ struct wiphy *wiphy_new(const struct cfg WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf); WARN_ON(ops->add_station && !ops->del_station); WARN_ON(ops->add_mpath && !ops->del_mpath); + WARN_ON(ops->join_mesh && !ops->leave_mesh); alloc_size = sizeof(*rdev) + sizeof_priv; @@ -752,6 +753,9 @@ static int cfg80211_netdev_notifier_call cfg80211_mlme_down(rdev, dev); wdev_unlock(wdev); break; + case NL80211_IFTYPE_MESH_POINT: + cfg80211_leave_mesh(rdev, dev); + break; default: break; } @@ -775,20 +779,27 @@ static int cfg80211_netdev_notifier_call } cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); -#ifdef CONFIG_CFG80211_WEXT wdev_lock(wdev); switch (wdev->iftype) { +#ifdef CONFIG_CFG80211_WEXT case NL80211_IFTYPE_ADHOC: cfg80211_ibss_wext_join(rdev, wdev); break; case NL80211_IFTYPE_STATION: cfg80211_mgd_wext_connect(rdev, wdev); break; +#endif + case NL80211_IFTYPE_MESH_POINT: + /* backward compat code ... */ + if (wdev->mesh_id_up_len) + __cfg80211_join_mesh(rdev, dev, wdev->ssid, + wdev->mesh_id_up_len, + &default_mesh_config); + break; default: break; } wdev_unlock(wdev); -#endif rdev->opencount++; mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); --- wireless-testing.orig/net/mac80211/cfg.c 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/mac80211/cfg.c 2010-12-02 09:38:22.000000000 +0100 @@ -60,11 +60,6 @@ static int ieee80211_change_iface(struct if (ret) return ret; - if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len) - ieee80211_sdata_set_mesh_id(sdata, - params->mesh_id_len, - params->mesh_id); - if (type == NL80211_IFTYPE_AP_VLAN && params && params->use_4addr == 0) rcu_assign_pointer(sdata->u.vlan.sta, NULL); @@ -1003,9 +998,9 @@ static inline bool _chg_mesh_attr(enum n return (mask >> (parm-1)) & 0x1; } -static int ieee80211_set_mesh_params(struct wiphy *wiphy, - struct net_device *dev, - const struct mesh_config *nconf, u32 mask) +static int ieee80211_update_mesh_params(struct wiphy *wiphy, + struct net_device *dev, u32 mask, + const struct mesh_config *nconf) { struct mesh_config *conf; struct ieee80211_sub_if_data *sdata; @@ -1054,6 +1049,30 @@ static int ieee80211_set_mesh_params(str return 0; } +static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, + const struct mesh_config *conf, + const struct mesh_setup *setup) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + + memcpy(&sdata->u.mesh.mshcfg, conf, sizeof(struct mesh_config)); + ifmsh->mesh_id_len = setup->mesh_id_len; + memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len); + + ieee80211_start_mesh(sdata); + + return 0; +} + +static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + ieee80211_stop_mesh(sdata); + + return 0; +} #endif static int ieee80211_change_bss(struct wiphy *wiphy, @@ -1758,8 +1777,10 @@ struct cfg80211_ops mac80211_config_ops .change_mpath = ieee80211_change_mpath, .get_mpath = ieee80211_get_mpath, .dump_mpath = ieee80211_dump_mpath, - .set_mesh_params = ieee80211_set_mesh_params, + .update_mesh_params = ieee80211_update_mesh_params, .get_mesh_params = ieee80211_get_mesh_params, + .join_mesh = ieee80211_join_mesh, + .leave_mesh = ieee80211_leave_mesh, #endif .change_bss = ieee80211_change_bss, .set_txq_params = ieee80211_set_txq_params, --- wireless-testing.orig/net/mac80211/ieee80211_i.h 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/mac80211/ieee80211_i.h 2010-12-02 09:38:22.000000000 +0100 @@ -608,19 +608,6 @@ struct ieee80211_sub_if_data *vif_to_sda return container_of(p, struct ieee80211_sub_if_data, vif); } -static inline void -ieee80211_sdata_set_mesh_id(struct ieee80211_sub_if_data *sdata, - u8 mesh_id_len, u8 *mesh_id) -{ -#ifdef CONFIG_MAC80211_MESH - struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - ifmsh->mesh_id_len = mesh_id_len; - memcpy(ifmsh->mesh_id, mesh_id, mesh_id_len); -#else - WARN_ON(1); -#endif -} - enum sdata_queue_type { IEEE80211_SDATA_QUEUE_TYPE_FRAME = 0, IEEE80211_SDATA_QUEUE_AGG_START = 1, --- wireless-testing.orig/net/mac80211/iface.c 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/mac80211/iface.c 2010-12-02 09:38:22.000000000 +0100 @@ -268,9 +268,7 @@ static int ieee80211_do_open(struct net_ goto err_stop; } - if (ieee80211_vif_is_mesh(&sdata->vif)) { - ieee80211_start_mesh(sdata); - } else if (sdata->vif.type == NL80211_IFTYPE_AP) { + if (sdata->vif.type == NL80211_IFTYPE_AP) { local->fif_pspoll++; local->fif_probe_req++; @@ -495,10 +493,6 @@ static void ieee80211_do_stop(struct iee ieee80211_adjust_monitor_flags(sdata, -1); ieee80211_configure_filter(local); break; - case NL80211_IFTYPE_MESH_POINT: - if (ieee80211_vif_is_mesh(&sdata->vif)) - ieee80211_stop_mesh(sdata); - /* fall through */ default: flush_work(&sdata->work); /* @@ -1188,12 +1182,6 @@ int ieee80211_if_add(struct ieee80211_lo if (ret) goto fail; - if (ieee80211_vif_is_mesh(&sdata->vif) && - params && params->mesh_id_len) - ieee80211_sdata_set_mesh_id(sdata, - params->mesh_id_len, - params->mesh_id); - mutex_lock(&local->iflist_mtx); list_add_tail_rcu(&sdata->list, &local->interfaces); mutex_unlock(&local->iflist_mtx); --- wireless-testing.orig/net/mac80211/mesh.c 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/mac80211/mesh.c 2010-12-02 09:38:22.000000000 +0100 @@ -674,26 +674,6 @@ void ieee80211_mesh_init_sdata(struct ie ieee80211_mesh_housekeeping_timer, (unsigned long) sdata); - ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T; - ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T; - ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T; - ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR; - ifmsh->mshcfg.dot11MeshTTL = MESH_TTL; - ifmsh->mshcfg.auto_open_plinks = true; - ifmsh->mshcfg.dot11MeshMaxPeerLinks = - MESH_MAX_ESTAB_PLINKS; - ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout = - MESH_PATH_TIMEOUT; - ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval = - MESH_PREQ_MIN_INT; - ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime = - MESH_DIAM_TRAVERSAL_TIME; - ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries = - MESH_MAX_PREQ_RETRIES; - ifmsh->mshcfg.path_refresh_time = - MESH_PATH_REFRESH_TIME; - ifmsh->mshcfg.min_discovery_timeout = - MESH_MIN_DISCOVERY_TIMEOUT; ifmsh->accepting_plinks = true; ifmsh->preq_id = 0; ifmsh->sn = 0; --- wireless-testing.orig/net/mac80211/mesh.h 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/mac80211/mesh.h 2010-12-02 09:38:22.000000000 +0100 @@ -175,33 +175,10 @@ struct mesh_rmc { */ #define MESH_CFG_CMP_LEN (IEEE80211_MESH_CONFIG_LEN - 2) -/* Default values, timeouts in ms */ -#define MESH_TTL 31 -#define MESH_MAX_RETR 3 -#define MESH_RET_T 100 -#define MESH_CONF_T 100 -#define MESH_HOLD_T 100 - -#define MESH_PATH_TIMEOUT 5000 -/* Minimum interval between two consecutive PREQs originated by the same - * interface - */ -#define MESH_PREQ_MIN_INT 10 -#define MESH_DIAM_TRAVERSAL_TIME 50 -/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before - * timing out. This way it will remain ACTIVE and no data frames will be - * unnecesarily held in the pending queue. - */ -#define MESH_PATH_REFRESH_TIME 1000 -#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME) #define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units */ -#define MESH_MAX_PREQ_RETRIES 4 #define MESH_PATH_EXPIRE (600 * HZ) -/* Default maximum number of established plinks per interface */ -#define MESH_MAX_ESTAB_PLINKS 32 - /* Default maximum number of plinks per interface */ #define MESH_MAX_PLINKS 256 --- wireless-testing.orig/net/wireless/util.c 2010-12-02 09:32:13.000000000 +0100 +++ wireless-testing/net/wireless/util.c 2010-12-02 09:38:22.000000000 +0100 @@ -792,6 +792,7 @@ int cfg80211_change_iface(struct cfg8021 if (ntype != otype) { dev->ieee80211_ptr->use_4addr = false; + dev->ieee80211_ptr->mesh_id_up_len = 0; switch (otype) { case NL80211_IFTYPE_ADHOC: