Return-path: Received: from mail.atheros.com ([12.19.149.2]:13825 "EHLO mail.atheros.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751517Ab0LAHc5 (ORCPT ); Wed, 1 Dec 2010 02:32:57 -0500 Received: from mail.atheros.com ([10.10.20.105]) by sidewinder.atheros.com for ; Tue, 30 Nov 2010 23:32:43 -0800 From: Vasanthakumar Thiagarajan To: CC: Subject: [PATCH 00/26] Add support for AR9485 Date: Tue, 30 Nov 2010 23:32:29 -0800 Message-ID: <1291188775-13707-1-git-send-email-vasanth@atheros.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: John, This patch series add support for a new chipset of AR9003 family. This chip(AR9485) is an 1x1 and 2.4Ghz band only. Vasanth Vasanthakumar Thiagarajan (26): ath9k_hw: Define hw version macros for AR9485 ath9k_hw: Add initvals.h for AR9485 ath9k_hw: Enable hw initialization for AR9485 ath9k_hw: Initialize mode registers for AR9485 ath9k_hw: Initialize tx/rx gain table from initvals.h for AR9485 ath9k_hw: Eeeprom changes for AR9485 ath9k_hw: Disable LDPC for AR9485 ath9k: Disable TX STBC for AR9485 ath9k: Enable extended synch for AR9485 to fix L0s recovery issue ath9k: Configure pll control for AR9485 ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 from an array for AR9485 ath9k_hw: Add a helper function to get spur channel pointer from cal data for AR9003 family ath9k: Read spur channel information from eeprom for AR9485 ath9k_hw: Configure xpa bias level for AR9485 ath9k_hw: Read and configure antenna diversity control for AR9485 ath9k_hw: Configure attenuation control only for chain 0 on AR9485 ath9k_hw: Configure internal regulator for AR9485 ath9k_hw: Read and configure turnning caps to regulate freq accuracy ath9k_hw: Configure power control only for chain 0 on AR9485 ath9k_hw: Program appropriate chianmask for AR9485 before starting AGC/IQ cal ath9k_hw: Define IQcal correction coefficient registers using index ath9k_hw: Add IQ cal changes for AR9485 ath9k_hw: Program appropriate register for temperature compensation cal for AR9485 ath9k_hw: Setup paprd only for chain 0 on AR9485 ath9k_hw: Disable MRC CCK for AR9485 ath9k: Add device id of AR9485 to pci table drivers/net/wireless/ath/ath.h | 1 + drivers/net/wireless/ath/ath9k/ani.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 256 ++++++- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 193 ++++- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 2 + drivers/net/wireless/ath/ath9k/ar9003_hw.c | 278 +++++-- drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 40 +- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 76 ++- drivers/net/wireless/ath/ath9k/ar9003_phy.h | 70 ++- drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 943 ++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.c | 19 +- drivers/net/wireless/ath/ath9k/hw.h | 3 + drivers/net/wireless/ath/ath9k/init.c | 4 +- drivers/net/wireless/ath/ath9k/main.c | 3 + drivers/net/wireless/ath/ath9k/pci.c | 13 + drivers/net/wireless/ath/ath9k/reg.h | 10 + 16 files changed, 1745 insertions(+), 168 deletions(-) create mode 100644 drivers/net/wireless/ath/ath9k/ar9485_initvals.h