Return-path: Received: from mail30s.wh2.ocn.ne.jp ([125.206.180.198]:7568 "HELO mail30s.wh2.ocn.ne.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753795Ab1ASJUi (ORCPT ); Wed, 19 Jan 2011 04:20:38 -0500 Received: from vs3016.wh2.ocn.ne.jp (125.206.180.189) by mail30s.wh2.ocn.ne.jp (RS ver 1.0.95vs) with SMTP id 0-0535238836 for ; Wed, 19 Jan 2011 18:20:36 +0900 (JST) Subject: [PATCH 6/8] ath5: Remove unused CTL definitions To: linville@tuxdriver.com From: Bruno Randolf Cc: linux-wireless@vger.kernel.org Date: Wed, 19 Jan 2011 18:21:02 +0900 Message-ID: <20110119092102.19628.68971.stgit@localhost6.localdomain6> In-Reply-To: <20110119091949.19628.28309.stgit@localhost6.localdomain6> References: <20110119091949.19628.28309.stgit@localhost6.localdomain6> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Sender: linux-wireless-owner@vger.kernel.org List-ID: They are unused in ath5k and a more detailled definition is in ath/regd_common.h. Signed-off-by: Bruno Randolf --- drivers/net/wireless/ath/ath5k/eeprom.h | 23 ----------------------- 1 files changed, 0 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index d46f105..6511c27 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -268,29 +268,6 @@ enum ath5k_ctl_mode { AR5K_CTL_MODE_M = 15, }; -/* Default CTL ids for the 3 main reg domains. - * Atheros only uses these by default but vendors - * can have up to 32 different CTLs for different - * scenarios. Note that theese values are ORed with - * the mode id (above) so we can have up to 24 CTL - * datasets out of these 3 main regdomains. That leaves - * 8 ids that can be used by vendors and since 0x20 is - * missing from HAL sources i guess this is the set of - * custom CTLs vendors can use. */ -#define AR5K_CTL_FCC 0x10 -#define AR5K_CTL_CUSTOM 0x20 -#define AR5K_CTL_ETSI 0x30 -#define AR5K_CTL_MKK 0x40 - -/* Indicates a CTL with only mode set and - * no reg domain mapping, such CTLs are used - * for world roaming domains or simply when - * a reg domain is not set */ -#define AR5K_CTL_NO_REGDOMAIN 0xf0 - -/* Indicates an empty (invalid) CTL */ -#define AR5K_CTL_NO_CTL 0xff - /* Per channel calibration data, used for power table setup */ struct ath5k_chan_pcal_info_rf5111 { /* Power levels in half dbm units