Return-path: Received: from mga11.intel.com ([192.55.52.93]:24527 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753784Ab1BUTV3 (ORCPT ); Mon, 21 Feb 2011 14:21:29 -0500 From: Wey-Yi Guy To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, ipw3945-devel@lists.sourceforge.net, Meenakshi Venkataraman , Wey-Yi Guy Subject: [PATCH 4/4] iwlwifi: split the drivers for agn and legacy devices 3945/4965 Date: Mon, 21 Feb 2011 11:06:49 -0800 Message-Id: <1298315209-17986-5-git-send-email-wey-yi.w.guy@intel.com> In-Reply-To: <1298315209-17986-1-git-send-email-wey-yi.w.guy@intel.com> References: <1298315209-17986-1-git-send-email-wey-yi.w.guy@intel.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Meenakshi Venkataraman Intel WiFi devices 3945 and 4965 now have their own driver in the folder drivers/net/wireless/iwlegacy Add support to build these drivers independently of the driver for AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko, and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko contains code shared between both devices. The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3 ABGN device. Signed-off-by: Meenakshi Venkataraman Acked-by: Johannes Berg Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/Makefile | 3 +- drivers/net/wireless/iwlwifi/Kconfig | 124 +- drivers/net/wireless/iwlwifi/Makefile | 39 +- drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c | 522 --- drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h | 60 - drivers/net/wireless/iwlwifi/iwl-3945-fh.h | 188 - drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 294 -- drivers/net/wireless/iwlwifi/iwl-3945-led.c | 64 - drivers/net/wireless/iwlwifi/iwl-3945-led.h | 32 - drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 995 ------ drivers/net/wireless/iwlwifi/iwl-3945.c | 2819 --------------- drivers/net/wireless/iwlwifi/iwl-3945.h | 308 -- drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 792 ----- drivers/net/wireless/iwlwifi/iwl-4965.c | 2666 -------------- drivers/net/wireless/iwlwifi/iwl-agn.c | 18 - drivers/net/wireless/iwlwifi/iwl-core.c | 54 - drivers/net/wireless/iwlwifi/iwl-debugfs.c | 2 - drivers/net/wireless/iwlwifi/iwl-dev.h | 4 +- drivers/net/wireless/iwlwifi/iwl-eeprom.c | 8 - drivers/net/wireless/iwlwifi/iwl-hcmd.c | 5 - drivers/net/wireless/iwlwifi/iwl-led.c | 2 - drivers/net/wireless/iwlwifi/iwl-legacy.c | 657 ---- drivers/net/wireless/iwlwifi/iwl-legacy.h | 79 - drivers/net/wireless/iwlwifi/iwl-power.c | 3 - drivers/net/wireless/iwlwifi/iwl-rx.c | 6 - drivers/net/wireless/iwlwifi/iwl-scan.c | 10 - drivers/net/wireless/iwlwifi/iwl-sta.c | 11 - drivers/net/wireless/iwlwifi/iwl-tx.c | 7 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 4334 ----------------------- 30 files changed, 61 insertions(+), 14046 deletions(-) delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-fh.h delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-hw.h delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.h delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-rs.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.h delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-hw.h delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.c delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.h delete mode 100644 drivers/net/wireless/iwlwifi/iwl3945-base.c diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index b4338f3..7aeb113 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -274,6 +274,7 @@ source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/ipw2x00/Kconfig" source "drivers/net/wireless/iwlwifi/Kconfig" +source "drivers/net/wireless/iwlegacy/Kconfig" source "drivers/net/wireless/iwmc3200wifi/Kconfig" source "drivers/net/wireless/libertas/Kconfig" source "drivers/net/wireless/orinoco/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 9760561..cd0c7e2 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -41,7 +41,8 @@ obj-$(CONFIG_ADM8211) += adm8211.o obj-$(CONFIG_MWL8K) += mwl8k.o -obj-$(CONFIG_IWLWIFI) += iwlwifi/ +obj-$(CONFIG_IWLAGN) += iwlwifi/ +obj-$(CONFIG_IWLWIFI_LEGACY) += iwlegacy/ obj-$(CONFIG_RT2X00) += rt2x00/ obj-$(CONFIG_P54_COMMON) += p54/ diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index e1e3b1c..17d555f 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -1,18 +1,52 @@ -config IWLWIFI - tristate "Intel Wireless Wifi" +config IWLAGN + tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlagn) " depends on PCI && MAC80211 select FW_LOADER select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGERS select MAC80211_LEDS + ---help--- + Select to build the driver supporting the: + + Intel Wireless WiFi Link Next-Gen AGN + + This option enables support for use with the following hardware: + Intel Wireless WiFi Link 6250AGN Adapter + Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) + Intel WiFi Link 1000BGN + Intel Wireless WiFi 5150AGN + Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN + Intel 6005 Series Wi-Fi Adapters + Intel 6030 Series Wi-Fi Adapters + Intel Wireless WiFi Link 6150BGN 2 Adapter + Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) + Intel 2000 Series Wi-Fi Adapters + + + This driver uses the kernel's mac80211 subsystem. + + In order to use this driver, you will need a microcode (uCode) + image for it. You can obtain the microcode from: + + . + + The microcode is typically installed in /lib/firmware. You can + look in the hotplug script /etc/hotplug/firmware.agent to + determine which directory FIRMWARE_DIR is set to when the script + runs. + + If you want to compile the driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read . The + module will be called iwlagn. menu "Debugging Options" - depends on IWLWIFI + depends on IWLAGN config IWLWIFI_DEBUG - bool "Enable full debugging output in iwlagn and iwl3945 drivers" - depends on IWLWIFI + bool "Enable full debugging output in the iwlagn driver" + depends on IWLAGN ---help--- This option will enable debug tracing output for the iwlwifi drivers @@ -37,7 +71,7 @@ config IWLWIFI_DEBUG config IWLWIFI_DEBUGFS bool "iwlagn debugfs support" - depends on IWLWIFI && MAC80211_DEBUGFS + depends on IWLAGN && MAC80211_DEBUGFS ---help--- Enable creation of debugfs files for the iwlwifi drivers. This is a low-impact option that allows getting insight into the @@ -45,13 +79,13 @@ config IWLWIFI_DEBUGFS config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE bool "Experimental uCode support" - depends on IWLWIFI && IWLWIFI_DEBUG + depends on IWLAGN && IWLWIFI_DEBUG ---help--- Enable use of experimental ucode for testing and debugging. config IWLWIFI_DEVICE_TRACING bool "iwlwifi device access tracing" - depends on IWLWIFI + depends on IWLAGN depends on EVENT_TRACING help Say Y here to trace all commands, including TX frames and IO @@ -68,57 +102,9 @@ config IWLWIFI_DEVICE_TRACING occur. endmenu -config IWLAGN - tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)" - depends on IWLWIFI - ---help--- - Select to build the driver supporting the: - - Intel Wireless WiFi Link Next-Gen AGN - - This driver uses the kernel's mac80211 subsystem. - - In order to use this driver, you will need a microcode (uCode) - image for it. You can obtain the microcode from: - - . - - The microcode is typically installed in /lib/firmware. You can - look in the hotplug script /etc/hotplug/firmware.agent to - determine which directory FIRMWARE_DIR is set to when the script - runs. - - If you want to compile the driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The - module will be called iwlagn. - - -config IWL4965 - bool "Intel Wireless WiFi 4965AGN" - depends on IWLAGN - ---help--- - This option enables support for Intel Wireless WiFi Link 4965AGN - -config IWL5000 - bool "Intel Wireless-N/Advanced-N/Ultimate-N WiFi Link" - depends on IWLAGN - ---help--- - This option enables support for use with the following hardware: - Intel Wireless WiFi Link 6250AGN Adapter - Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) - Intel WiFi Link 1000BGN - Intel Wireless WiFi 5150AGN - Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN - Intel 6005 Series Wi-Fi Adapters - Intel 6030 Series Wi-Fi Adapters - Intel Wireless WiFi Link 6150BGN 2 Adapter - Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) - Intel 2000 Series Wi-Fi Adapters - config IWL_P2P bool "iwlwifi experimental P2P support" - depends on IWL5000 + depends on IWLAGN help This option enables experimental P2P support for some devices based on microcode support. Since P2P support is still under @@ -132,27 +118,3 @@ config IWL_P2P Say Y only if you want to experiment with P2P. -config IWL3945 - tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)" - depends on IWLWIFI - ---help--- - Select to build the driver supporting the: - - Intel PRO/Wireless 3945ABG/BG Network Connection - - This driver uses the kernel's mac80211 subsystem. - - In order to use this driver, you will need a microcode (uCode) - image for it. You can obtain the microcode from: - - . - - The microcode is typically installed in /lib/firmware. You can - look in the hotplug script /etc/hotplug/firmware.agent to - determine which directory FIRMWARE_DIR is set to when the script - runs. - - If you want to compile the driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . The - module will be called iwl3945. diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 25be742..aab7d15 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -1,36 +1,23 @@ -obj-$(CONFIG_IWLWIFI) += iwlcore.o -iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o -iwlcore-objs += iwl-rx.o iwl-tx.o iwl-sta.o -iwlcore-objs += iwl-scan.o iwl-led.o -iwlcore-$(CONFIG_IWL3945) += iwl-legacy.o -iwlcore-$(CONFIG_IWL4965) += iwl-legacy.o -iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o -iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o - -# If 3945 is selected only, iwl-legacy.o will be added -# to iwlcore-m above, but it needs to be built in. -iwlcore-objs += $(iwlcore-m) - -CFLAGS_iwl-devtrace.o := -I$(src) - # AGN obj-$(CONFIG_IWLAGN) += iwlagn.o iwlagn-objs := iwl-agn.o iwl-agn-rs.o iwl-agn-led.o iwlagn-objs += iwl-agn-ucode.o iwl-agn-tx.o iwlagn-objs += iwl-agn-lib.o iwl-agn-rx.o iwl-agn-calib.o iwlagn-objs += iwl-agn-tt.o iwl-agn-sta.o iwl-agn-eeprom.o -iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o -iwlagn-$(CONFIG_IWL4965) += iwl-4965.o -iwlagn-$(CONFIG_IWL5000) += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o -iwlagn-$(CONFIG_IWL5000) += iwl-5000.o -iwlagn-$(CONFIG_IWL5000) += iwl-6000.o -iwlagn-$(CONFIG_IWL5000) += iwl-1000.o -iwlagn-$(CONFIG_IWL5000) += iwl-2000.o +iwlagn-objs += iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o +iwlagn-objs += iwl-rx.o iwl-tx.o iwl-sta.o +iwlagn-objs += iwl-scan.o iwl-led.o +iwlagn-objs += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o +iwlagn-objs += iwl-5000.o +iwlagn-objs += iwl-6000.o +iwlagn-objs += iwl-1000.o +iwlagn-objs += iwl-2000.o + +iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o +iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o +iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o -# 3945 -obj-$(CONFIG_IWL3945) += iwl3945.o -iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o -iwl3945-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-3945-debugfs.o +CFLAGS_iwl-devtrace.o := -I$(src) ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c deleted file mode 100644 index ef0835b..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c +++ /dev/null @@ -1,522 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - -#include "iwl-3945-debugfs.h" - - -static int iwl3945_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz) -{ - int p = 0; - - p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n", - le32_to_cpu(priv->_3945.statistics.flag)); - if (le32_to_cpu(priv->_3945.statistics.flag) & - UCODE_STATISTICS_CLEAR_MSK) - p += scnprintf(buf + p, bufsz - p, - "\tStatistics have been cleared\n"); - p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n", - (le32_to_cpu(priv->_3945.statistics.flag) & - UCODE_STATISTICS_FREQUENCY_MSK) - ? "2.4 GHz" : "5.2 GHz"); - p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n", - (le32_to_cpu(priv->_3945.statistics.flag) & - UCODE_STATISTICS_NARROW_BAND_MSK) - ? "enabled" : "disabled"); - return p; -} - -ssize_t iwl3945_ucode_rx_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int pos = 0; - char *buf; - int bufsz = sizeof(struct iwl39_statistics_rx_phy) * 40 + - sizeof(struct iwl39_statistics_rx_non_phy) * 40 + 400; - ssize_t ret; - struct iwl39_statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm; - struct iwl39_statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck; - struct iwl39_statistics_rx_non_phy *general, *accum_general; - struct iwl39_statistics_rx_non_phy *delta_general, *max_general; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - /* - * The statistic information display here is based on - * the last statistics notification from uCode - * might not reflect the current uCode activity - */ - ofdm = &priv->_3945.statistics.rx.ofdm; - cck = &priv->_3945.statistics.rx.cck; - general = &priv->_3945.statistics.rx.general; - accum_ofdm = &priv->_3945.accum_statistics.rx.ofdm; - accum_cck = &priv->_3945.accum_statistics.rx.cck; - accum_general = &priv->_3945.accum_statistics.rx.general; - delta_ofdm = &priv->_3945.delta_statistics.rx.ofdm; - delta_cck = &priv->_3945.delta_statistics.rx.cck; - delta_general = &priv->_3945.delta_statistics.rx.general; - max_ofdm = &priv->_3945.max_delta.rx.ofdm; - max_cck = &priv->_3945.max_delta.rx.cck; - max_general = &priv->_3945.max_delta.rx.general; - - pos += iwl3945_statistics_flag(priv, buf, bufsz); - pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" - "acumulative delta max\n", - "Statistics_Rx - OFDM:"); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "ina_cnt:", le32_to_cpu(ofdm->ina_cnt), - accum_ofdm->ina_cnt, - delta_ofdm->ina_cnt, max_ofdm->ina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "fina_cnt:", - le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt, - delta_ofdm->fina_cnt, max_ofdm->fina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", "plcp_err:", - le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err, - delta_ofdm->plcp_err, max_ofdm->plcp_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", "crc32_err:", - le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err, - delta_ofdm->crc32_err, max_ofdm->crc32_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", "overrun_err:", - le32_to_cpu(ofdm->overrun_err), - accum_ofdm->overrun_err, delta_ofdm->overrun_err, - max_ofdm->overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "early_overrun_err:", - le32_to_cpu(ofdm->early_overrun_err), - accum_ofdm->early_overrun_err, - delta_ofdm->early_overrun_err, - max_ofdm->early_overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "crc32_good:", le32_to_cpu(ofdm->crc32_good), - accum_ofdm->crc32_good, delta_ofdm->crc32_good, - max_ofdm->crc32_good); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", "false_alarm_cnt:", - le32_to_cpu(ofdm->false_alarm_cnt), - accum_ofdm->false_alarm_cnt, - delta_ofdm->false_alarm_cnt, - max_ofdm->false_alarm_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "fina_sync_err_cnt:", - le32_to_cpu(ofdm->fina_sync_err_cnt), - accum_ofdm->fina_sync_err_cnt, - delta_ofdm->fina_sync_err_cnt, - max_ofdm->fina_sync_err_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "sfd_timeout:", - le32_to_cpu(ofdm->sfd_timeout), - accum_ofdm->sfd_timeout, - delta_ofdm->sfd_timeout, - max_ofdm->sfd_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "fina_timeout:", - le32_to_cpu(ofdm->fina_timeout), - accum_ofdm->fina_timeout, - delta_ofdm->fina_timeout, - max_ofdm->fina_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "unresponded_rts:", - le32_to_cpu(ofdm->unresponded_rts), - accum_ofdm->unresponded_rts, - delta_ofdm->unresponded_rts, - max_ofdm->unresponded_rts); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "rxe_frame_lmt_ovrun:", - le32_to_cpu(ofdm->rxe_frame_limit_overrun), - accum_ofdm->rxe_frame_limit_overrun, - delta_ofdm->rxe_frame_limit_overrun, - max_ofdm->rxe_frame_limit_overrun); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "sent_ack_cnt:", - le32_to_cpu(ofdm->sent_ack_cnt), - accum_ofdm->sent_ack_cnt, - delta_ofdm->sent_ack_cnt, - max_ofdm->sent_ack_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "sent_cts_cnt:", - le32_to_cpu(ofdm->sent_cts_cnt), - accum_ofdm->sent_cts_cnt, - delta_ofdm->sent_cts_cnt, max_ofdm->sent_cts_cnt); - - pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" - "acumulative delta max\n", - "Statistics_Rx - CCK:"); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "ina_cnt:", - le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt, - delta_cck->ina_cnt, max_cck->ina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "fina_cnt:", - le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt, - delta_cck->fina_cnt, max_cck->fina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "plcp_err:", - le32_to_cpu(cck->plcp_err), accum_cck->plcp_err, - delta_cck->plcp_err, max_cck->plcp_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "crc32_err:", - le32_to_cpu(cck->crc32_err), accum_cck->crc32_err, - delta_cck->crc32_err, max_cck->crc32_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "overrun_err:", - le32_to_cpu(cck->overrun_err), - accum_cck->overrun_err, - delta_cck->overrun_err, max_cck->overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "early_overrun_err:", - le32_to_cpu(cck->early_overrun_err), - accum_cck->early_overrun_err, - delta_cck->early_overrun_err, - max_cck->early_overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "crc32_good:", - le32_to_cpu(cck->crc32_good), accum_cck->crc32_good, - delta_cck->crc32_good, - max_cck->crc32_good); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "false_alarm_cnt:", - le32_to_cpu(cck->false_alarm_cnt), - accum_cck->false_alarm_cnt, - delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "fina_sync_err_cnt:", - le32_to_cpu(cck->fina_sync_err_cnt), - accum_cck->fina_sync_err_cnt, - delta_cck->fina_sync_err_cnt, - max_cck->fina_sync_err_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "sfd_timeout:", - le32_to_cpu(cck->sfd_timeout), - accum_cck->sfd_timeout, - delta_cck->sfd_timeout, max_cck->sfd_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "fina_timeout:", - le32_to_cpu(cck->fina_timeout), - accum_cck->fina_timeout, - delta_cck->fina_timeout, max_cck->fina_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "unresponded_rts:", - le32_to_cpu(cck->unresponded_rts), - accum_cck->unresponded_rts, - delta_cck->unresponded_rts, - max_cck->unresponded_rts); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "rxe_frame_lmt_ovrun:", - le32_to_cpu(cck->rxe_frame_limit_overrun), - accum_cck->rxe_frame_limit_overrun, - delta_cck->rxe_frame_limit_overrun, - max_cck->rxe_frame_limit_overrun); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "sent_ack_cnt:", - le32_to_cpu(cck->sent_ack_cnt), - accum_cck->sent_ack_cnt, - delta_cck->sent_ack_cnt, - max_cck->sent_ack_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "sent_cts_cnt:", - le32_to_cpu(cck->sent_cts_cnt), - accum_cck->sent_cts_cnt, - delta_cck->sent_cts_cnt, - max_cck->sent_cts_cnt); - - pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" - "acumulative delta max\n", - "Statistics_Rx - GENERAL:"); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "bogus_cts:", - le32_to_cpu(general->bogus_cts), - accum_general->bogus_cts, - delta_general->bogus_cts, max_general->bogus_cts); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "bogus_ack:", - le32_to_cpu(general->bogus_ack), - accum_general->bogus_ack, - delta_general->bogus_ack, max_general->bogus_ack); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "non_bssid_frames:", - le32_to_cpu(general->non_bssid_frames), - accum_general->non_bssid_frames, - delta_general->non_bssid_frames, - max_general->non_bssid_frames); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "filtered_frames:", - le32_to_cpu(general->filtered_frames), - accum_general->filtered_frames, - delta_general->filtered_frames, - max_general->filtered_frames); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "non_channel_beacons:", - le32_to_cpu(general->non_channel_beacons), - accum_general->non_channel_beacons, - delta_general->non_channel_beacons, - max_general->non_channel_beacons); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -ssize_t iwl3945_ucode_tx_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int pos = 0; - char *buf; - int bufsz = (sizeof(struct iwl39_statistics_tx) * 48) + 250; - ssize_t ret; - struct iwl39_statistics_tx *tx, *accum_tx, *delta_tx, *max_tx; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - /* - * The statistic information display here is based on - * the last statistics notification from uCode - * might not reflect the current uCode activity - */ - tx = &priv->_3945.statistics.tx; - accum_tx = &priv->_3945.accum_statistics.tx; - delta_tx = &priv->_3945.delta_statistics.tx; - max_tx = &priv->_3945.max_delta.tx; - pos += iwl3945_statistics_flag(priv, buf, bufsz); - pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" - "acumulative delta max\n", - "Statistics_Tx:"); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "preamble:", - le32_to_cpu(tx->preamble_cnt), - accum_tx->preamble_cnt, - delta_tx->preamble_cnt, max_tx->preamble_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "rx_detected_cnt:", - le32_to_cpu(tx->rx_detected_cnt), - accum_tx->rx_detected_cnt, - delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "bt_prio_defer_cnt:", - le32_to_cpu(tx->bt_prio_defer_cnt), - accum_tx->bt_prio_defer_cnt, - delta_tx->bt_prio_defer_cnt, - max_tx->bt_prio_defer_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "bt_prio_kill_cnt:", - le32_to_cpu(tx->bt_prio_kill_cnt), - accum_tx->bt_prio_kill_cnt, - delta_tx->bt_prio_kill_cnt, - max_tx->bt_prio_kill_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "few_bytes_cnt:", - le32_to_cpu(tx->few_bytes_cnt), - accum_tx->few_bytes_cnt, - delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "cts_timeout:", - le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout, - delta_tx->cts_timeout, max_tx->cts_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "ack_timeout:", - le32_to_cpu(tx->ack_timeout), - accum_tx->ack_timeout, - delta_tx->ack_timeout, max_tx->ack_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "expected_ack_cnt:", - le32_to_cpu(tx->expected_ack_cnt), - accum_tx->expected_ack_cnt, - delta_tx->expected_ack_cnt, - max_tx->expected_ack_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "actual_ack_cnt:", - le32_to_cpu(tx->actual_ack_cnt), - accum_tx->actual_ack_cnt, - delta_tx->actual_ack_cnt, - max_tx->actual_ack_cnt); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -ssize_t iwl3945_ucode_general_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int pos = 0; - char *buf; - int bufsz = sizeof(struct iwl39_statistics_general) * 10 + 300; - ssize_t ret; - struct iwl39_statistics_general *general, *accum_general; - struct iwl39_statistics_general *delta_general, *max_general; - struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg; - struct iwl39_statistics_div *div, *accum_div, *delta_div, *max_div; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - /* - * The statistic information display here is based on - * the last statistics notification from uCode - * might not reflect the current uCode activity - */ - general = &priv->_3945.statistics.general; - dbg = &priv->_3945.statistics.general.dbg; - div = &priv->_3945.statistics.general.div; - accum_general = &priv->_3945.accum_statistics.general; - delta_general = &priv->_3945.delta_statistics.general; - max_general = &priv->_3945.max_delta.general; - accum_dbg = &priv->_3945.accum_statistics.general.dbg; - delta_dbg = &priv->_3945.delta_statistics.general.dbg; - max_dbg = &priv->_3945.max_delta.general.dbg; - accum_div = &priv->_3945.accum_statistics.general.div; - delta_div = &priv->_3945.delta_statistics.general.div; - max_div = &priv->_3945.max_delta.general.div; - pos += iwl3945_statistics_flag(priv, buf, bufsz); - pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" - "acumulative delta max\n", - "Statistics_General:"); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "burst_check:", - le32_to_cpu(dbg->burst_check), - accum_dbg->burst_check, - delta_dbg->burst_check, max_dbg->burst_check); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "burst_count:", - le32_to_cpu(dbg->burst_count), - accum_dbg->burst_count, - delta_dbg->burst_count, max_dbg->burst_count); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "sleep_time:", - le32_to_cpu(general->sleep_time), - accum_general->sleep_time, - delta_general->sleep_time, max_general->sleep_time); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "slots_out:", - le32_to_cpu(general->slots_out), - accum_general->slots_out, - delta_general->slots_out, max_general->slots_out); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "slots_idle:", - le32_to_cpu(general->slots_idle), - accum_general->slots_idle, - delta_general->slots_idle, max_general->slots_idle); - pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n", - le32_to_cpu(general->ttl_timestamp)); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "tx_on_a:", - le32_to_cpu(div->tx_on_a), accum_div->tx_on_a, - delta_div->tx_on_a, max_div->tx_on_a); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "tx_on_b:", - le32_to_cpu(div->tx_on_b), accum_div->tx_on_b, - delta_div->tx_on_b, max_div->tx_on_b); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "exec_time:", - le32_to_cpu(div->exec_time), accum_div->exec_time, - delta_div->exec_time, max_div->exec_time); - pos += scnprintf(buf + pos, bufsz - pos, - " %-30s %10u %10u %10u %10u\n", - "probe_time:", - le32_to_cpu(div->probe_time), accum_div->probe_time, - delta_div->probe_time, max_div->probe_time); - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h deleted file mode 100644 index 70809c5..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h +++ /dev/null @@ -1,60 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-debug.h" - -#ifdef CONFIG_IWLWIFI_DEBUGFS -ssize_t iwl3945_ucode_rx_stats_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos); -ssize_t iwl3945_ucode_tx_stats_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos); -ssize_t iwl3945_ucode_general_stats_read(struct file *file, - char __user *user_buf, size_t count, - loff_t *ppos); -#else -static ssize_t iwl3945_ucode_rx_stats_read(struct file *file, - char __user *user_buf, size_t count, - loff_t *ppos) -{ - return 0; -} -static ssize_t iwl3945_ucode_tx_stats_read(struct file *file, - char __user *user_buf, size_t count, - loff_t *ppos) -{ - return 0; -} -static ssize_t iwl3945_ucode_general_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - return 0; -} -#endif diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h b/drivers/net/wireless/iwlwifi/iwl-3945-fh.h deleted file mode 100644 index 2c9ed2b..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h +++ /dev/null @@ -1,188 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_3945_fh_h__ -#define __iwl_3945_fh_h__ - -/************************************/ -/* iwl3945 Flow Handler Definitions */ -/************************************/ - -/** - * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) - * Addresses are offsets from device's PCI hardware base address. - */ -#define FH39_MEM_LOWER_BOUND (0x0800) -#define FH39_MEM_UPPER_BOUND (0x1000) - -#define FH39_CBCC_TABLE (FH39_MEM_LOWER_BOUND + 0x140) -#define FH39_TFDB_TABLE (FH39_MEM_LOWER_BOUND + 0x180) -#define FH39_RCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x400) -#define FH39_RSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x4c0) -#define FH39_TCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x500) -#define FH39_TSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x680) - -/* TFDB (Transmit Frame Buffer Descriptor) */ -#define FH39_TFDB(_ch, buf) (FH39_TFDB_TABLE + \ - ((_ch) * 2 + (buf)) * 0x28) -#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch) (FH39_TFDB_TABLE + 0x50 * (_ch)) - -/* CBCC channel is [0,2] */ -#define FH39_CBCC(_ch) (FH39_CBCC_TABLE + (_ch) * 0x8) -#define FH39_CBCC_CTRL(_ch) (FH39_CBCC(_ch) + 0x00) -#define FH39_CBCC_BASE(_ch) (FH39_CBCC(_ch) + 0x04) - -/* RCSR channel is [0,2] */ -#define FH39_RCSR(_ch) (FH39_RCSR_TABLE + (_ch) * 0x40) -#define FH39_RCSR_CONFIG(_ch) (FH39_RCSR(_ch) + 0x00) -#define FH39_RCSR_RBD_BASE(_ch) (FH39_RCSR(_ch) + 0x04) -#define FH39_RCSR_WPTR(_ch) (FH39_RCSR(_ch) + 0x20) -#define FH39_RCSR_RPTR_ADDR(_ch) (FH39_RCSR(_ch) + 0x24) - -#define FH39_RSCSR_CHNL0_WPTR (FH39_RCSR_WPTR(0)) - -/* RSSR */ -#define FH39_RSSR_CTRL (FH39_RSSR_TABLE + 0x000) -#define FH39_RSSR_STATUS (FH39_RSSR_TABLE + 0x004) - -/* TCSR */ -#define FH39_TCSR(_ch) (FH39_TCSR_TABLE + (_ch) * 0x20) -#define FH39_TCSR_CONFIG(_ch) (FH39_TCSR(_ch) + 0x00) -#define FH39_TCSR_CREDIT(_ch) (FH39_TCSR(_ch) + 0x04) -#define FH39_TCSR_BUFF_STTS(_ch) (FH39_TCSR(_ch) + 0x08) - -/* TSSR */ -#define FH39_TSSR_CBB_BASE (FH39_TSSR_TABLE + 0x000) -#define FH39_TSSR_MSG_CONFIG (FH39_TSSR_TABLE + 0x008) -#define FH39_TSSR_TX_STATUS (FH39_TSSR_TABLE + 0x010) - - -/* DBM */ - -#define FH39_SRVC_CHNL (6) - -#define FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE (20) -#define FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH (4) - -#define FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN (0x08000000) - -#define FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE (0x80000000) - -#define FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE (0x20000000) - -#define FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 (0x01000000) - -#define FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST (0x00001000) - -#define FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH (0x00000000) - -#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) -#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRIVER (0x00000001) - -#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000) -#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008) - -#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) - -#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) - -#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) -#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) - -#define FH39_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00004000) - -#define FH39_TCSR_CHNL_TX_BUF_STS_REG_BIT_TFDB_WPTR (0x00000001) - -#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON (0xFF000000) -#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON (0x00FF0000) - -#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B (0x00000400) - -#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON (0x00000100) -#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON (0x00000080) - -#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH (0x00000020) -#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH (0x00000005) - -#define FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) (BIT(_ch) << 24) -#define FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch) (BIT(_ch) << 16) - -#define FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_ch) \ - (FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) | \ - FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch)) - -#define FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) - -struct iwl3945_tfd_tb { - __le32 addr; - __le32 len; -} __packed; - -struct iwl3945_tfd { - __le32 control_flags; - struct iwl3945_tfd_tb tbs[4]; - u8 __pad[28]; -} __packed; - - -#endif /* __iwl_3945_fh_h__ */ - diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h deleted file mode 100644 index 65b5834..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h +++ /dev/null @@ -1,294 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -/* - * Please use this file (iwl-3945-hw.h) only for hardware-related definitions. - * Please use iwl-commands.h for uCode API definitions. - * Please use iwl-3945.h for driver implementation definitions. - */ - -#ifndef __iwl_3945_hw__ -#define __iwl_3945_hw__ - -#include "iwl-eeprom.h" - -/* RSSI to dBm */ -#define IWL39_RSSI_OFFSET 95 - -#define IWL_DEFAULT_TX_POWER 0x0F - -/* - * EEPROM related constants, enums, and structures. - */ -#define EEPROM_SKU_CAP_OP_MODE_MRC (1 << 7) - -/* - * Mapping of a Tx power level, at factory calibration temperature, - * to a radio/DSP gain table index. - * One for each of 5 "sample" power levels in each band. - * v_det is measured at the factory, using the 3945's built-in power amplifier - * (PA) output voltage detector. This same detector is used during Tx of - * long packets in normal operation to provide feedback as to proper output - * level. - * Data copied from EEPROM. - * DO NOT ALTER THIS STRUCTURE!!! - */ -struct iwl3945_eeprom_txpower_sample { - u8 gain_index; /* index into power (gain) setup table ... */ - s8 power; /* ... for this pwr level for this chnl group */ - u16 v_det; /* PA output voltage */ -} __packed; - -/* - * Mappings of Tx power levels -> nominal radio/DSP gain table indexes. - * One for each channel group (a.k.a. "band") (1 for BG, 4 for A). - * Tx power setup code interpolates between the 5 "sample" power levels - * to determine the nominal setup for a requested power level. - * Data copied from EEPROM. - * DO NOT ALTER THIS STRUCTURE!!! - */ -struct iwl3945_eeprom_txpower_group { - struct iwl3945_eeprom_txpower_sample samples[5]; /* 5 power levels */ - s32 a, b, c, d, e; /* coefficients for voltage->power - * formula (signed) */ - s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on - * frequency (signed) */ - s8 saturation_power; /* highest power possible by h/w in this - * band */ - u8 group_channel; /* "representative" channel # in this band */ - s16 temperature; /* h/w temperature at factory calib this band - * (signed) */ -} __packed; - -/* - * Temperature-based Tx-power compensation data, not band-specific. - * These coefficients are use to modify a/b/c/d/e coeffs based on - * difference between current temperature and factory calib temperature. - * Data copied from EEPROM. - */ -struct iwl3945_eeprom_temperature_corr { - u32 Ta; - u32 Tb; - u32 Tc; - u32 Td; - u32 Te; -} __packed; - -/* - * EEPROM map - */ -struct iwl3945_eeprom { - u8 reserved0[16]; - u16 device_id; /* abs.ofs: 16 */ - u8 reserved1[2]; - u16 pmc; /* abs.ofs: 20 */ - u8 reserved2[20]; - u8 mac_address[6]; /* abs.ofs: 42 */ - u8 reserved3[58]; - u16 board_revision; /* abs.ofs: 106 */ - u8 reserved4[11]; - u8 board_pba_number[9]; /* abs.ofs: 119 */ - u8 reserved5[8]; - u16 version; /* abs.ofs: 136 */ - u8 sku_cap; /* abs.ofs: 138 */ - u8 leds_mode; /* abs.ofs: 139 */ - u16 oem_mode; - u16 wowlan_mode; /* abs.ofs: 142 */ - u16 leds_time_interval; /* abs.ofs: 144 */ - u8 leds_off_time; /* abs.ofs: 146 */ - u8 leds_on_time; /* abs.ofs: 147 */ - u8 almgor_m_version; /* abs.ofs: 148 */ - u8 antenna_switch_type; /* abs.ofs: 149 */ - u8 reserved6[42]; - u8 sku_id[4]; /* abs.ofs: 192 */ - -/* - * Per-channel regulatory data. - * - * Each channel that *might* be supported by 3945 or 4965 has a fixed location - * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory - * txpower (MSB). - * - * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz) - * channels (only for 4965, not supported by 3945) appear later in the EEPROM. - * - * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 - */ - u16 band_1_count; /* abs.ofs: 196 */ - struct iwl_eeprom_channel band_1_channels[14]; /* abs.ofs: 198 */ - -/* - * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, - * 5.0 GHz channels 7, 8, 11, 12, 16 - * (4915-5080MHz) (none of these is ever supported) - */ - u16 band_2_count; /* abs.ofs: 226 */ - struct iwl_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */ - -/* - * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 - * (5170-5320MHz) - */ - u16 band_3_count; /* abs.ofs: 254 */ - struct iwl_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */ - -/* - * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 - * (5500-5700MHz) - */ - u16 band_4_count; /* abs.ofs: 280 */ - struct iwl_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */ - -/* - * 5.7 GHz channels 145, 149, 153, 157, 161, 165 - * (5725-5825MHz) - */ - u16 band_5_count; /* abs.ofs: 304 */ - struct iwl_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */ - - u8 reserved9[194]; - -/* - * 3945 Txpower calibration data. - */ -#define IWL_NUM_TX_CALIB_GROUPS 5 - struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS]; -/* abs.ofs: 512 */ - struct iwl3945_eeprom_temperature_corr corrections; /* abs.ofs: 832 */ - u8 reserved16[172]; /* fill out to full 1024 byte block */ -} __packed; - -#define IWL3945_EEPROM_IMG_SIZE 1024 - -/* End of EEPROM */ - -#define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */ -#define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */ - -/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */ -#define IWL39_NUM_QUEUES 5 -#define IWL39_CMD_QUEUE_NUM 4 - -#define IWL_DEFAULT_TX_RETRY 15 - -/*********************************************/ - -#define RFD_SIZE 4 -#define NUM_TFD_CHUNKS 4 - -#define RX_QUEUE_SIZE 256 -#define RX_QUEUE_MASK 255 -#define RX_QUEUE_SIZE_LOG 8 - -#define U32_PAD(n) ((4-(n))&0x3) - -#define TFD_CTL_COUNT_SET(n) (n << 24) -#define TFD_CTL_COUNT_GET(ctl) ((ctl >> 24) & 7) -#define TFD_CTL_PAD_SET(n) (n << 28) -#define TFD_CTL_PAD_GET(ctl) (ctl >> 28) - -/* Sizes and addresses for instruction and data memory (SRAM) in - * 3945's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */ -#define IWL39_RTC_INST_LOWER_BOUND (0x000000) -#define IWL39_RTC_INST_UPPER_BOUND (0x014000) - -#define IWL39_RTC_DATA_LOWER_BOUND (0x800000) -#define IWL39_RTC_DATA_UPPER_BOUND (0x808000) - -#define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \ - IWL39_RTC_INST_LOWER_BOUND) -#define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \ - IWL39_RTC_DATA_LOWER_BOUND) - -#define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE -#define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE - -/* Size of uCode instruction memory in bootstrap state machine */ -#define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE - -static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr) -{ - return (addr >= IWL39_RTC_DATA_LOWER_BOUND) && - (addr < IWL39_RTC_DATA_UPPER_BOUND); -} - -/* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE - * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */ -struct iwl3945_shared { - __le32 tx_base_ptr[8]; -} __packed; - -static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags) -{ - return le16_to_cpu(rate_n_flags) & 0xFF; -} - -static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags) -{ - return le16_to_cpu(rate_n_flags); -} - -static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags) -{ - return cpu_to_le16((u16)rate|flags); -} -#endif diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c deleted file mode 100644 index dc7c3a4..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c +++ /dev/null @@ -1,64 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "iwl-commands.h" -#include "iwl-3945.h" -#include "iwl-core.h" -#include "iwl-dev.h" -#include "iwl-3945-led.h" - - -/* Send led command */ -static int iwl3945_send_led_cmd(struct iwl_priv *priv, - struct iwl_led_cmd *led_cmd) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_LEDS_CMD, - .len = sizeof(struct iwl_led_cmd), - .data = led_cmd, - .flags = CMD_ASYNC, - .callback = NULL, - }; - - return iwl_send_cmd(priv, &cmd); -} - -const struct iwl_led_ops iwl3945_led_ops = { - .cmd = iwl3945_send_led_cmd, -}; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h deleted file mode 100644 index ce990ad..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h +++ /dev/null @@ -1,32 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#ifndef __iwl_3945_led_h__ -#define __iwl_3945_led_h__ - -extern const struct iwl_led_ops iwl3945_led_ops; - -#endif /* __iwl_3945_led_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c deleted file mode 100644 index 1f3e7e3..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ /dev/null @@ -1,995 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include "iwl-commands.h" -#include "iwl-3945.h" -#include "iwl-sta.h" - -#define RS_NAME "iwl-3945-rs" - -static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = { - 7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202 -}; - -static s32 iwl3945_expected_tpt_g_prot[IWL_RATE_COUNT_3945] = { - 7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125 -}; - -static s32 iwl3945_expected_tpt_a[IWL_RATE_COUNT_3945] = { - 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186 -}; - -static s32 iwl3945_expected_tpt_b[IWL_RATE_COUNT_3945] = { - 7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0 -}; - -struct iwl3945_tpt_entry { - s8 min_rssi; - u8 index; -}; - -static struct iwl3945_tpt_entry iwl3945_tpt_table_a[] = { - {-60, IWL_RATE_54M_INDEX}, - {-64, IWL_RATE_48M_INDEX}, - {-72, IWL_RATE_36M_INDEX}, - {-80, IWL_RATE_24M_INDEX}, - {-84, IWL_RATE_18M_INDEX}, - {-85, IWL_RATE_12M_INDEX}, - {-87, IWL_RATE_9M_INDEX}, - {-89, IWL_RATE_6M_INDEX} -}; - -static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = { - {-60, IWL_RATE_54M_INDEX}, - {-64, IWL_RATE_48M_INDEX}, - {-68, IWL_RATE_36M_INDEX}, - {-80, IWL_RATE_24M_INDEX}, - {-84, IWL_RATE_18M_INDEX}, - {-85, IWL_RATE_12M_INDEX}, - {-86, IWL_RATE_11M_INDEX}, - {-88, IWL_RATE_5M_INDEX}, - {-90, IWL_RATE_2M_INDEX}, - {-92, IWL_RATE_1M_INDEX} -}; - -#define IWL_RATE_MAX_WINDOW 62 -#define IWL_RATE_FLUSH (3*HZ) -#define IWL_RATE_WIN_FLUSH (HZ/2) -#define IWL39_RATE_HIGH_TH 11520 -#define IWL_SUCCESS_UP_TH 8960 -#define IWL_SUCCESS_DOWN_TH 10880 -#define IWL_RATE_MIN_FAILURE_TH 6 -#define IWL_RATE_MIN_SUCCESS_TH 8 -#define IWL_RATE_DECREASE_TH 1920 -#define IWL_RATE_RETRY_TH 15 - -static u8 iwl3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band) -{ - u32 index = 0; - u32 table_size = 0; - struct iwl3945_tpt_entry *tpt_table = NULL; - - if ((rssi < IWL_MIN_RSSI_VAL) || (rssi > IWL_MAX_RSSI_VAL)) - rssi = IWL_MIN_RSSI_VAL; - - switch (band) { - case IEEE80211_BAND_2GHZ: - tpt_table = iwl3945_tpt_table_g; - table_size = ARRAY_SIZE(iwl3945_tpt_table_g); - break; - - case IEEE80211_BAND_5GHZ: - tpt_table = iwl3945_tpt_table_a; - table_size = ARRAY_SIZE(iwl3945_tpt_table_a); - break; - - default: - BUG(); - break; - } - - while ((index < table_size) && (rssi < tpt_table[index].min_rssi)) - index++; - - index = min(index, (table_size - 1)); - - return tpt_table[index].index; -} - -static void iwl3945_clear_window(struct iwl3945_rate_scale_data *window) -{ - window->data = 0; - window->success_counter = 0; - window->success_ratio = -1; - window->counter = 0; - window->average_tpt = IWL_INVALID_VALUE; - window->stamp = 0; -} - -/** - * iwl3945_rate_scale_flush_windows - flush out the rate scale windows - * - * Returns the number of windows that have gathered data but were - * not flushed. If there were any that were not flushed, then - * reschedule the rate flushing routine. - */ -static int iwl3945_rate_scale_flush_windows(struct iwl3945_rs_sta *rs_sta) -{ - int unflushed = 0; - int i; - unsigned long flags; - struct iwl_priv *priv __maybe_unused = rs_sta->priv; - - /* - * For each rate, if we have collected data on that rate - * and it has been more than IWL_RATE_WIN_FLUSH - * since we flushed, clear out the gathered statistics - */ - for (i = 0; i < IWL_RATE_COUNT_3945; i++) { - if (!rs_sta->win[i].counter) - continue; - - spin_lock_irqsave(&rs_sta->lock, flags); - if (time_after(jiffies, rs_sta->win[i].stamp + - IWL_RATE_WIN_FLUSH)) { - IWL_DEBUG_RATE(priv, "flushing %d samples of rate " - "index %d\n", - rs_sta->win[i].counter, i); - iwl3945_clear_window(&rs_sta->win[i]); - } else - unflushed++; - spin_unlock_irqrestore(&rs_sta->lock, flags); - } - - return unflushed; -} - -#define IWL_RATE_FLUSH_MAX 5000 /* msec */ -#define IWL_RATE_FLUSH_MIN 50 /* msec */ -#define IWL_AVERAGE_PACKETS 1500 - -static void iwl3945_bg_rate_scale_flush(unsigned long data) -{ - struct iwl3945_rs_sta *rs_sta = (void *)data; - struct iwl_priv *priv __maybe_unused = rs_sta->priv; - int unflushed = 0; - unsigned long flags; - u32 packet_count, duration, pps; - - IWL_DEBUG_RATE(priv, "enter\n"); - - unflushed = iwl3945_rate_scale_flush_windows(rs_sta); - - spin_lock_irqsave(&rs_sta->lock, flags); - - /* Number of packets Rx'd since last time this timer ran */ - packet_count = (rs_sta->tx_packets - rs_sta->last_tx_packets) + 1; - - rs_sta->last_tx_packets = rs_sta->tx_packets + 1; - - if (unflushed) { - duration = - jiffies_to_msecs(jiffies - rs_sta->last_partial_flush); - - IWL_DEBUG_RATE(priv, "Tx'd %d packets in %dms\n", - packet_count, duration); - - /* Determine packets per second */ - if (duration) - pps = (packet_count * 1000) / duration; - else - pps = 0; - - if (pps) { - duration = (IWL_AVERAGE_PACKETS * 1000) / pps; - if (duration < IWL_RATE_FLUSH_MIN) - duration = IWL_RATE_FLUSH_MIN; - else if (duration > IWL_RATE_FLUSH_MAX) - duration = IWL_RATE_FLUSH_MAX; - } else - duration = IWL_RATE_FLUSH_MAX; - - rs_sta->flush_time = msecs_to_jiffies(duration); - - IWL_DEBUG_RATE(priv, "new flush period: %d msec ave %d\n", - duration, packet_count); - - mod_timer(&rs_sta->rate_scale_flush, jiffies + - rs_sta->flush_time); - - rs_sta->last_partial_flush = jiffies; - } else { - rs_sta->flush_time = IWL_RATE_FLUSH; - rs_sta->flush_pending = 0; - } - /* If there weren't any unflushed entries, we don't schedule the timer - * to run again */ - - rs_sta->last_flush = jiffies; - - spin_unlock_irqrestore(&rs_sta->lock, flags); - - IWL_DEBUG_RATE(priv, "leave\n"); -} - -/** - * iwl3945_collect_tx_data - Update the success/failure sliding window - * - * We keep a sliding window of the last 64 packets transmitted - * at this rate. window->data contains the bitmask of successful - * packets. - */ -static void iwl3945_collect_tx_data(struct iwl3945_rs_sta *rs_sta, - struct iwl3945_rate_scale_data *window, - int success, int retries, int index) -{ - unsigned long flags; - s32 fail_count; - struct iwl_priv *priv __maybe_unused = rs_sta->priv; - - if (!retries) { - IWL_DEBUG_RATE(priv, "leave: retries == 0 -- should be at least 1\n"); - return; - } - - spin_lock_irqsave(&rs_sta->lock, flags); - - /* - * Keep track of only the latest 62 tx frame attempts in this rate's - * history window; anything older isn't really relevant any more. - * If we have filled up the sliding window, drop the oldest attempt; - * if the oldest attempt (highest bit in bitmap) shows "success", - * subtract "1" from the success counter (this is the main reason - * we keep these bitmaps!). - * */ - while (retries > 0) { - if (window->counter >= IWL_RATE_MAX_WINDOW) { - - /* remove earliest */ - window->counter = IWL_RATE_MAX_WINDOW - 1; - - if (window->data & (1ULL << (IWL_RATE_MAX_WINDOW - 1))) { - window->data &= ~(1ULL << (IWL_RATE_MAX_WINDOW - 1)); - window->success_counter--; - } - } - - /* Increment frames-attempted counter */ - window->counter++; - - /* Shift bitmap by one frame (throw away oldest history), - * OR in "1", and increment "success" if this - * frame was successful. */ - window->data <<= 1; - if (success > 0) { - window->success_counter++; - window->data |= 0x1; - success--; - } - - retries--; - } - - /* Calculate current success ratio, avoid divide-by-0! */ - if (window->counter > 0) - window->success_ratio = 128 * (100 * window->success_counter) - / window->counter; - else - window->success_ratio = IWL_INVALID_VALUE; - - fail_count = window->counter - window->success_counter; - - /* Calculate average throughput, if we have enough history. */ - if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || - (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) - window->average_tpt = ((window->success_ratio * - rs_sta->expected_tpt[index] + 64) / 128); - else - window->average_tpt = IWL_INVALID_VALUE; - - /* Tag this window as having been updated */ - window->stamp = jiffies; - - spin_unlock_irqrestore(&rs_sta->lock, flags); - -} - -/* - * Called after adding a new station to initialize rate scaling - */ -void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id) -{ - struct ieee80211_hw *hw = priv->hw; - struct ieee80211_conf *conf = &priv->hw->conf; - struct iwl3945_sta_priv *psta; - struct iwl3945_rs_sta *rs_sta; - struct ieee80211_supported_band *sband; - int i; - - IWL_DEBUG_INFO(priv, "enter\n"); - if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id) - goto out; - - psta = (struct iwl3945_sta_priv *) sta->drv_priv; - rs_sta = &psta->rs_sta; - sband = hw->wiphy->bands[conf->channel->band]; - - rs_sta->priv = priv; - - rs_sta->start_rate = IWL_RATE_INVALID; - - /* default to just 802.11b */ - rs_sta->expected_tpt = iwl3945_expected_tpt_b; - - rs_sta->last_partial_flush = jiffies; - rs_sta->last_flush = jiffies; - rs_sta->flush_time = IWL_RATE_FLUSH; - rs_sta->last_tx_packets = 0; - - rs_sta->rate_scale_flush.data = (unsigned long)rs_sta; - rs_sta->rate_scale_flush.function = iwl3945_bg_rate_scale_flush; - - for (i = 0; i < IWL_RATE_COUNT_3945; i++) - iwl3945_clear_window(&rs_sta->win[i]); - - /* TODO: what is a good starting rate for STA? About middle? Maybe not - * the lowest or the highest rate.. Could consider using RSSI from - * previous packets? Need to have IEEE 802.1X auth succeed immediately - * after assoc.. */ - - for (i = sband->n_bitrates - 1; i >= 0; i--) { - if (sta->supp_rates[sband->band] & (1 << i)) { - rs_sta->last_txrate_idx = i; - break; - } - } - - priv->_3945.sta_supp_rates = sta->supp_rates[sband->band]; - /* For 5 GHz band it start at IWL_FIRST_OFDM_RATE */ - if (sband->band == IEEE80211_BAND_5GHZ) { - rs_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; - priv->_3945.sta_supp_rates = priv->_3945.sta_supp_rates << - IWL_FIRST_OFDM_RATE; - } - -out: - priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS; - - IWL_DEBUG_INFO(priv, "leave\n"); -} - -static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) -{ - return hw->priv; -} - -/* rate scale requires free function to be implemented */ -static void rs_free(void *priv) -{ - return; -} - -static void *rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp) -{ - struct iwl3945_rs_sta *rs_sta; - struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; - struct iwl_priv *priv __maybe_unused = iwl_priv; - - IWL_DEBUG_RATE(priv, "enter\n"); - - rs_sta = &psta->rs_sta; - - spin_lock_init(&rs_sta->lock); - init_timer(&rs_sta->rate_scale_flush); - - IWL_DEBUG_RATE(priv, "leave\n"); - - return rs_sta; -} - -static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta, - void *priv_sta) -{ - struct iwl3945_rs_sta *rs_sta = priv_sta; - - /* - * Be careful not to use any members of iwl3945_rs_sta (like trying - * to use iwl_priv to print out debugging) since it may not be fully - * initialized at this point. - */ - del_timer_sync(&rs_sta->rate_scale_flush); -} - - -/** - * rs_tx_status - Update rate control values based on Tx results - * - * NOTE: Uses iwl_priv->retry_rate for the # of retries attempted by - * the hardware for each rate. - */ -static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb) -{ - s8 retries = 0, current_count; - int scale_rate_index, first_index, last_index; - unsigned long flags; - struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl3945_rs_sta *rs_sta = priv_sta; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - IWL_DEBUG_RATE(priv, "enter\n"); - - retries = info->status.rates[0].count; - /* Sanity Check for retries */ - if (retries > IWL_RATE_RETRY_TH) - retries = IWL_RATE_RETRY_TH; - - first_index = sband->bitrates[info->status.rates[0].idx].hw_value; - if ((first_index < 0) || (first_index >= IWL_RATE_COUNT_3945)) { - IWL_DEBUG_RATE(priv, "leave: Rate out of bounds: %d\n", first_index); - return; - } - - if (!priv_sta) { - IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n"); - return; - } - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (!rs_sta->priv) { - IWL_DEBUG_RATE(priv, "leave: STA priv data uninitialized!\n"); - return; - } - - - rs_sta->tx_packets++; - - scale_rate_index = first_index; - last_index = first_index; - - /* - * Update the window for each rate. We determine which rates - * were Tx'd based on the total number of retries vs. the number - * of retries configured for each rate -- currently set to the - * priv value 'retry_rate' vs. rate specific - * - * On exit from this while loop last_index indicates the rate - * at which the frame was finally transmitted (or failed if no - * ACK) - */ - while (retries > 1) { - if ((retries - 1) < priv->retry_rate) { - current_count = (retries - 1); - last_index = scale_rate_index; - } else { - current_count = priv->retry_rate; - last_index = iwl3945_rs_next_rate(priv, - scale_rate_index); - } - - /* Update this rate accounting for as many retries - * as was used for it (per current_count) */ - iwl3945_collect_tx_data(rs_sta, - &rs_sta->win[scale_rate_index], - 0, current_count, scale_rate_index); - IWL_DEBUG_RATE(priv, "Update rate %d for %d retries.\n", - scale_rate_index, current_count); - - retries -= current_count; - - scale_rate_index = last_index; - } - - - /* Update the last index window with success/failure based on ACK */ - IWL_DEBUG_RATE(priv, "Update rate %d with %s.\n", - last_index, - (info->flags & IEEE80211_TX_STAT_ACK) ? - "success" : "failure"); - iwl3945_collect_tx_data(rs_sta, - &rs_sta->win[last_index], - info->flags & IEEE80211_TX_STAT_ACK, 1, last_index); - - /* We updated the rate scale window -- if its been more than - * flush_time since the last run, schedule the flush - * again */ - spin_lock_irqsave(&rs_sta->lock, flags); - - if (!rs_sta->flush_pending && - time_after(jiffies, rs_sta->last_flush + - rs_sta->flush_time)) { - - rs_sta->last_partial_flush = jiffies; - rs_sta->flush_pending = 1; - mod_timer(&rs_sta->rate_scale_flush, - jiffies + rs_sta->flush_time); - } - - spin_unlock_irqrestore(&rs_sta->lock, flags); - - IWL_DEBUG_RATE(priv, "leave\n"); -} - -static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta, - u8 index, u16 rate_mask, enum ieee80211_band band) -{ - u8 high = IWL_RATE_INVALID; - u8 low = IWL_RATE_INVALID; - struct iwl_priv *priv __maybe_unused = rs_sta->priv; - - /* 802.11A walks to the next literal adjacent rate in - * the rate table */ - if (unlikely(band == IEEE80211_BAND_5GHZ)) { - int i; - u32 mask; - - /* Find the previous rate that is in the rate mask */ - i = index - 1; - for (mask = (1 << i); i >= 0; i--, mask >>= 1) { - if (rate_mask & mask) { - low = i; - break; - } - } - - /* Find the next rate that is in the rate mask */ - i = index + 1; - for (mask = (1 << i); i < IWL_RATE_COUNT_3945; - i++, mask <<= 1) { - if (rate_mask & mask) { - high = i; - break; - } - } - - return (high << 8) | low; - } - - low = index; - while (low != IWL_RATE_INVALID) { - if (rs_sta->tgg) - low = iwl3945_rates[low].prev_rs_tgg; - else - low = iwl3945_rates[low].prev_rs; - if (low == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << low)) - break; - IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low); - } - - high = index; - while (high != IWL_RATE_INVALID) { - if (rs_sta->tgg) - high = iwl3945_rates[high].next_rs_tgg; - else - high = iwl3945_rates[high].next_rs; - if (high == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << high)) - break; - IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high); - } - - return (high << 8) | low; -} - -/** - * rs_get_rate - find the rate for the requested packet - * - * Returns the ieee80211_rate structure allocated by the driver. - * - * The rate control algorithm has no internal mapping between hw_mode's - * rate ordering and the rate ordering used by the rate control algorithm. - * - * The rate control algorithm uses a single table of rates that goes across - * the entire A/B/G spectrum vs. being limited to just one particular - * hw_mode. - * - * As such, we can't convert the index obtained below into the hw_mode's - * rate table and must reference the driver allocated rate table - * - */ -static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, - void *priv_sta, struct ieee80211_tx_rate_control *txrc) -{ - struct ieee80211_supported_band *sband = txrc->sband; - struct sk_buff *skb = txrc->skb; - u8 low = IWL_RATE_INVALID; - u8 high = IWL_RATE_INVALID; - u16 high_low; - int index; - struct iwl3945_rs_sta *rs_sta = priv_sta; - struct iwl3945_rate_scale_data *window = NULL; - int current_tpt = IWL_INVALID_VALUE; - int low_tpt = IWL_INVALID_VALUE; - int high_tpt = IWL_INVALID_VALUE; - u32 fail_count; - s8 scale_action = 0; - unsigned long flags; - u16 rate_mask = sta ? sta->supp_rates[sband->band] : 0; - s8 max_rate_idx = -1; - struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - IWL_DEBUG_RATE(priv, "enter\n"); - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (rs_sta && !rs_sta->priv) { - IWL_DEBUG_RATE(priv, "Rate scaling information not initialized yet.\n"); - priv_sta = NULL; - } - - if (rate_control_send_low(sta, priv_sta, txrc)) - return; - - rate_mask = sta->supp_rates[sband->band]; - - /* get user max rate if set */ - max_rate_idx = txrc->max_rate_idx; - if ((sband->band == IEEE80211_BAND_5GHZ) && (max_rate_idx != -1)) - max_rate_idx += IWL_FIRST_OFDM_RATE; - if ((max_rate_idx < 0) || (max_rate_idx >= IWL_RATE_COUNT)) - max_rate_idx = -1; - - index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT_3945 - 1); - - if (sband->band == IEEE80211_BAND_5GHZ) - rate_mask = rate_mask << IWL_FIRST_OFDM_RATE; - - spin_lock_irqsave(&rs_sta->lock, flags); - - /* for recent assoc, choose best rate regarding - * to rssi value - */ - if (rs_sta->start_rate != IWL_RATE_INVALID) { - if (rs_sta->start_rate < index && - (rate_mask & (1 << rs_sta->start_rate))) - index = rs_sta->start_rate; - rs_sta->start_rate = IWL_RATE_INVALID; - } - - /* force user max rate if set by user */ - if ((max_rate_idx != -1) && (max_rate_idx < index)) { - if (rate_mask & (1 << max_rate_idx)) - index = max_rate_idx; - } - - window = &(rs_sta->win[index]); - - fail_count = window->counter - window->success_counter; - - if (((fail_count < IWL_RATE_MIN_FAILURE_TH) && - (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))) { - spin_unlock_irqrestore(&rs_sta->lock, flags); - - IWL_DEBUG_RATE(priv, "Invalid average_tpt on rate %d: " - "counter: %d, success_counter: %d, " - "expected_tpt is %sNULL\n", - index, - window->counter, - window->success_counter, - rs_sta->expected_tpt ? "not " : ""); - - /* Can't calculate this yet; not enough history */ - window->average_tpt = IWL_INVALID_VALUE; - goto out; - - } - - current_tpt = window->average_tpt; - - high_low = iwl3945_get_adjacent_rate(rs_sta, index, rate_mask, - sband->band); - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* If user set max rate, dont allow higher than user constrain */ - if ((max_rate_idx != -1) && (max_rate_idx < high)) - high = IWL_RATE_INVALID; - - /* Collect Measured throughputs of adjacent rates */ - if (low != IWL_RATE_INVALID) - low_tpt = rs_sta->win[low].average_tpt; - - if (high != IWL_RATE_INVALID) - high_tpt = rs_sta->win[high].average_tpt; - - spin_unlock_irqrestore(&rs_sta->lock, flags); - - scale_action = 0; - - /* Low success ratio , need to drop the rate */ - if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) { - IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); - scale_action = -1; - /* No throughput measured yet for adjacent rates, - * try increase */ - } else if ((low_tpt == IWL_INVALID_VALUE) && - (high_tpt == IWL_INVALID_VALUE)) { - - if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH) - scale_action = 1; - else if (low != IWL_RATE_INVALID) - scale_action = 0; - - /* Both adjacent throughputs are measured, but neither one has - * better throughput; we're using the best rate, don't change - * it! */ - } else if ((low_tpt != IWL_INVALID_VALUE) && - (high_tpt != IWL_INVALID_VALUE) && - (low_tpt < current_tpt) && (high_tpt < current_tpt)) { - - IWL_DEBUG_RATE(priv, "No action -- low [%d] & high [%d] < " - "current_tpt [%d]\n", - low_tpt, high_tpt, current_tpt); - scale_action = 0; - - /* At least one of the rates has better throughput */ - } else { - if (high_tpt != IWL_INVALID_VALUE) { - - /* High rate has better throughput, Increase - * rate */ - if (high_tpt > current_tpt && - window->success_ratio >= IWL_RATE_INCREASE_TH) - scale_action = 1; - else { - IWL_DEBUG_RATE(priv, - "decrease rate because of high tpt\n"); - scale_action = 0; - } - } else if (low_tpt != IWL_INVALID_VALUE) { - if (low_tpt > current_tpt) { - IWL_DEBUG_RATE(priv, - "decrease rate because of low tpt\n"); - scale_action = -1; - } else if (window->success_ratio >= IWL_RATE_INCREASE_TH) { - /* Lower rate has better - * throughput,decrease rate */ - scale_action = 1; - } - } - } - - /* Sanity check; asked for decrease, but success rate or throughput - * has been good at old rate. Don't change it. */ - if ((scale_action == -1) && (low != IWL_RATE_INVALID) && - ((window->success_ratio > IWL_RATE_HIGH_TH) || - (current_tpt > (100 * rs_sta->expected_tpt[low])))) - scale_action = 0; - - switch (scale_action) { - case -1: - - /* Decrese rate */ - if (low != IWL_RATE_INVALID) - index = low; - break; - - case 1: - /* Increase rate */ - if (high != IWL_RATE_INVALID) - index = high; - - break; - - case 0: - default: - /* No change */ - break; - } - - IWL_DEBUG_RATE(priv, "Selected %d (action %d) - low %d high %d\n", - index, scale_action, low, high); - - out: - - rs_sta->last_txrate_idx = index; - if (sband->band == IEEE80211_BAND_5GHZ) - info->control.rates[0].idx = rs_sta->last_txrate_idx - - IWL_FIRST_OFDM_RATE; - else - info->control.rates[0].idx = rs_sta->last_txrate_idx; - - IWL_DEBUG_RATE(priv, "leave: %d\n", index); -} - -#ifdef CONFIG_MAC80211_DEBUGFS -static int iwl3945_open_file_generic(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -static ssize_t iwl3945_sta_dbgfs_stats_table_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - char *buff; - int desc = 0; - int j; - ssize_t ret; - struct iwl3945_rs_sta *lq_sta = file->private_data; - - buff = kmalloc(1024, GFP_KERNEL); - if (!buff) - return -ENOMEM; - - desc += sprintf(buff + desc, "tx packets=%d last rate index=%d\n" - "rate=0x%X flush time %d\n", - lq_sta->tx_packets, - lq_sta->last_txrate_idx, - lq_sta->start_rate, jiffies_to_msecs(lq_sta->flush_time)); - for (j = 0; j < IWL_RATE_COUNT_3945; j++) { - desc += sprintf(buff+desc, - "counter=%d success=%d %%=%d\n", - lq_sta->win[j].counter, - lq_sta->win[j].success_counter, - lq_sta->win[j].success_ratio); - } - ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); - kfree(buff); - return ret; -} - -static const struct file_operations rs_sta_dbgfs_stats_table_ops = { - .read = iwl3945_sta_dbgfs_stats_table_read, - .open = iwl3945_open_file_generic, - .llseek = default_llseek, -}; - -static void iwl3945_add_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct iwl3945_rs_sta *lq_sta = priv_sta; - - lq_sta->rs_sta_dbgfs_stats_table_file = - debugfs_create_file("rate_stats_table", 0600, dir, - lq_sta, &rs_sta_dbgfs_stats_table_ops); - -} - -static void iwl3945_remove_debugfs(void *priv, void *priv_sta) -{ - struct iwl3945_rs_sta *lq_sta = priv_sta; - debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); -} -#endif - -/* - * Initialization of rate scaling information is done by driver after - * the station is added. Since mac80211 calls this function before a - * station is added we ignore it. - */ -static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta) -{ -} - -static struct rate_control_ops rs_ops = { - .module = NULL, - .name = RS_NAME, - .tx_status = rs_tx_status, - .get_rate = rs_get_rate, - .rate_init = rs_rate_init_stub, - .alloc = rs_alloc, - .free = rs_free, - .alloc_sta = rs_alloc_sta, - .free_sta = rs_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = iwl3945_add_debugfs, - .remove_sta_debugfs = iwl3945_remove_debugfs, -#endif - -}; -void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id) -{ - struct iwl_priv *priv = hw->priv; - s32 rssi = 0; - unsigned long flags; - struct iwl3945_rs_sta *rs_sta; - struct ieee80211_sta *sta; - struct iwl3945_sta_priv *psta; - - IWL_DEBUG_RATE(priv, "enter\n"); - - rcu_read_lock(); - - sta = ieee80211_find_sta(priv->contexts[IWL_RXON_CTX_BSS].vif, - priv->stations[sta_id].sta.sta.addr); - if (!sta) { - IWL_DEBUG_RATE(priv, "Unable to find station to initialize rate scaling.\n"); - rcu_read_unlock(); - return; - } - - psta = (void *) sta->drv_priv; - rs_sta = &psta->rs_sta; - - spin_lock_irqsave(&rs_sta->lock, flags); - - rs_sta->tgg = 0; - switch (priv->band) { - case IEEE80211_BAND_2GHZ: - /* TODO: this always does G, not a regression */ - if (priv->contexts[IWL_RXON_CTX_BSS].active.flags & - RXON_FLG_TGG_PROTECT_MSK) { - rs_sta->tgg = 1; - rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot; - } else - rs_sta->expected_tpt = iwl3945_expected_tpt_g; - break; - - case IEEE80211_BAND_5GHZ: - rs_sta->expected_tpt = iwl3945_expected_tpt_a; - break; - case IEEE80211_NUM_BANDS: - BUG(); - break; - } - - spin_unlock_irqrestore(&rs_sta->lock, flags); - - rssi = priv->_3945.last_rx_rssi; - if (rssi == 0) - rssi = IWL_MIN_RSSI_VAL; - - IWL_DEBUG_RATE(priv, "Network RSSI: %d\n", rssi); - - rs_sta->start_rate = iwl3945_get_rate_index_by_rssi(rssi, priv->band); - - IWL_DEBUG_RATE(priv, "leave: rssi %d assign rate index: " - "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate, - iwl3945_rates[rs_sta->start_rate].plcp); - rcu_read_unlock(); -} - -int iwl3945_rate_control_register(void) -{ - return ieee80211_rate_control_register(&rs_ops); -} - -void iwl3945_rate_control_unregister(void) -{ - ieee80211_rate_control_unregister(&rs_ops); -} - - diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c deleted file mode 100644 index 5b6932c..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ /dev/null @@ -1,2819 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "iwl-fh.h" -#include "iwl-3945-fh.h" -#include "iwl-commands.h" -#include "iwl-sta.h" -#include "iwl-3945.h" -#include "iwl-eeprom.h" -#include "iwl-core.h" -#include "iwl-helpers.h" -#include "iwl-led.h" -#include "iwl-3945-led.h" -#include "iwl-3945-debugfs.h" -#include "iwl-legacy.h" - -#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ - [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ - IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX, \ - IWL_RATE_##r##M_INDEX_TABLE, \ - IWL_RATE_##ip##M_INDEX_TABLE } - -/* - * Parameter order: - * rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to IWL_RATE_INVALID - * - */ -const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = { - IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */ -}; - -static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index) -{ - u8 rate = iwl3945_rates[rate_index].prev_ieee; - - if (rate == IWL_RATE_INVALID) - rate = rate_index; - return rate; -} - -/* 1 = enable the iwl3945_disable_events() function */ -#define IWL_EVT_DISABLE (0) -#define IWL_EVT_DISABLE_SIZE (1532/32) - -/** - * iwl3945_disable_events - Disable selected events in uCode event log - * - * Disable an event by writing "1"s into "disable" - * bitmap in SRAM. Bit position corresponds to Event # (id/type). - * Default values of 0 enable uCode events to be logged. - * Use for only special debugging. This function is just a placeholder as-is, - * you'll need to provide the special bits! ... - * ... and set IWL_EVT_DISABLE to 1. */ -void iwl3945_disable_events(struct iwl_priv *priv) -{ - int i; - u32 base; /* SRAM address of event log header */ - u32 disable_ptr; /* SRAM address of event-disable bitmap array */ - u32 array_size; /* # of u32 entries in array */ - static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = { - 0x00000000, /* 31 - 0 Event id numbers */ - 0x00000000, /* 63 - 32 */ - 0x00000000, /* 95 - 64 */ - 0x00000000, /* 127 - 96 */ - 0x00000000, /* 159 - 128 */ - 0x00000000, /* 191 - 160 */ - 0x00000000, /* 223 - 192 */ - 0x00000000, /* 255 - 224 */ - 0x00000000, /* 287 - 256 */ - 0x00000000, /* 319 - 288 */ - 0x00000000, /* 351 - 320 */ - 0x00000000, /* 383 - 352 */ - 0x00000000, /* 415 - 384 */ - 0x00000000, /* 447 - 416 */ - 0x00000000, /* 479 - 448 */ - 0x00000000, /* 511 - 480 */ - 0x00000000, /* 543 - 512 */ - 0x00000000, /* 575 - 544 */ - 0x00000000, /* 607 - 576 */ - 0x00000000, /* 639 - 608 */ - 0x00000000, /* 671 - 640 */ - 0x00000000, /* 703 - 672 */ - 0x00000000, /* 735 - 704 */ - 0x00000000, /* 767 - 736 */ - 0x00000000, /* 799 - 768 */ - 0x00000000, /* 831 - 800 */ - 0x00000000, /* 863 - 832 */ - 0x00000000, /* 895 - 864 */ - 0x00000000, /* 927 - 896 */ - 0x00000000, /* 959 - 928 */ - 0x00000000, /* 991 - 960 */ - 0x00000000, /* 1023 - 992 */ - 0x00000000, /* 1055 - 1024 */ - 0x00000000, /* 1087 - 1056 */ - 0x00000000, /* 1119 - 1088 */ - 0x00000000, /* 1151 - 1120 */ - 0x00000000, /* 1183 - 1152 */ - 0x00000000, /* 1215 - 1184 */ - 0x00000000, /* 1247 - 1216 */ - 0x00000000, /* 1279 - 1248 */ - 0x00000000, /* 1311 - 1280 */ - 0x00000000, /* 1343 - 1312 */ - 0x00000000, /* 1375 - 1344 */ - 0x00000000, /* 1407 - 1376 */ - 0x00000000, /* 1439 - 1408 */ - 0x00000000, /* 1471 - 1440 */ - 0x00000000, /* 1503 - 1472 */ - }; - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (!iwl3945_hw_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); - return; - } - - disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32))); - array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32))); - - if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) { - IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n", - disable_ptr); - for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++) - iwl_write_targ_mem(priv, - disable_ptr + (i * sizeof(u32)), - evt_disable[i]); - - } else { - IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n"); - IWL_DEBUG_INFO(priv, " by writing \"1\"s into disable bitmap\n"); - IWL_DEBUG_INFO(priv, " in SRAM at 0x%x, size %d u32s\n", - disable_ptr, array_size); - } - -} - -static int iwl3945_hwrate_to_plcp_idx(u8 plcp) -{ - int idx; - - for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++) - if (iwl3945_rates[idx].plcp == plcp) - return idx; - return -1; -} - -#ifdef CONFIG_IWLWIFI_DEBUG -#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x - -static const char *iwl3945_get_tx_fail_reason(u32 status) -{ - switch (status & TX_STATUS_MSK) { - case TX_3945_STATUS_SUCCESS: - return "SUCCESS"; - TX_STATUS_ENTRY(SHORT_LIMIT); - TX_STATUS_ENTRY(LONG_LIMIT); - TX_STATUS_ENTRY(FIFO_UNDERRUN); - TX_STATUS_ENTRY(MGMNT_ABORT); - TX_STATUS_ENTRY(NEXT_FRAG); - TX_STATUS_ENTRY(LIFE_EXPIRE); - TX_STATUS_ENTRY(DEST_PS); - TX_STATUS_ENTRY(ABORTED); - TX_STATUS_ENTRY(BT_RETRY); - TX_STATUS_ENTRY(STA_INVALID); - TX_STATUS_ENTRY(FRAG_DROPPED); - TX_STATUS_ENTRY(TID_DISABLE); - TX_STATUS_ENTRY(FRAME_FLUSHED); - TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); - TX_STATUS_ENTRY(TX_LOCKED); - TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); - } - - return "UNKNOWN"; -} -#else -static inline const char *iwl3945_get_tx_fail_reason(u32 status) -{ - return ""; -} -#endif - -/* - * get ieee prev rate from rate scale table. - * for A and B mode we need to overright prev - * value - */ -int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate) -{ - int next_rate = iwl3945_get_prev_ieee_rate(rate); - - switch (priv->band) { - case IEEE80211_BAND_5GHZ: - if (rate == IWL_RATE_12M_INDEX) - next_rate = IWL_RATE_9M_INDEX; - else if (rate == IWL_RATE_6M_INDEX) - next_rate = IWL_RATE_6M_INDEX; - break; - case IEEE80211_BAND_2GHZ: - if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) && - iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { - if (rate == IWL_RATE_11M_INDEX) - next_rate = IWL_RATE_5M_INDEX; - } - break; - - default: - break; - } - - return next_rate; -} - - -/** - * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd - * - * When FW advances 'R' index, all entries between old and new 'R' index - * need to be reclaimed. As result, some free space forms. If there is - * enough free space (> low mark), wake the stack that feeds us. - */ -static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv, - int txq_id, int index) -{ - struct iwl_tx_queue *txq = &priv->txq[txq_id]; - struct iwl_queue *q = &txq->q; - struct iwl_tx_info *tx_info; - - BUG_ON(txq_id == IWL39_CMD_QUEUE_NUM); - - for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index; - q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { - - tx_info = &txq->txb[txq->q.read_ptr]; - ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb); - tx_info->skb = NULL; - priv->cfg->ops->lib->txq_free_tfd(priv, txq); - } - - if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) && - (txq_id != IWL39_CMD_QUEUE_NUM) && - priv->mac80211_registered) - iwl_wake_queue(priv, txq); -} - -/** - * iwl3945_rx_reply_tx - Handle Tx response - */ -static void iwl3945_rx_reply_tx(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int index = SEQ_TO_INDEX(sequence); - struct iwl_tx_queue *txq = &priv->txq[txq_id]; - struct ieee80211_tx_info *info; - struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; - u32 status = le32_to_cpu(tx_resp->status); - int rate_idx; - int fail; - - if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) { - IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d " - "is out of range [0-%d] %d %d\n", txq_id, - index, txq->q.n_bd, txq->q.write_ptr, - txq->q.read_ptr); - return; - } - - txq->time_stamp = jiffies; - info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb); - ieee80211_tx_info_clear_status(info); - - /* Fill the MRR chain with some info about on-chip retransmissions */ - rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx -= IWL_FIRST_OFDM_RATE; - - fail = tx_resp->failure_frame; - - info->status.rates[0].idx = rate_idx; - info->status.rates[0].count = fail + 1; /* add final attempt */ - - /* tx_status->rts_retry_count = tx_resp->failure_rts; */ - info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? - IEEE80211_TX_STAT_ACK : 0; - - IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", - txq_id, iwl3945_get_tx_fail_reason(status), status, - tx_resp->rate, tx_resp->failure_frame); - - IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index); - iwl3945_tx_queue_reclaim(priv, txq_id, index); - - if (status & TX_ABORT_REQUIRED_MSK) - IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n"); -} - - - -/***************************************************************************** - * - * Intel PRO/Wireless 3945ABG/BG Network Connection - * - * RX handler implementations - * - *****************************************************************************/ -#ifdef CONFIG_IWLWIFI_DEBUGFS -/* - * based on the assumption of all statistics counter are in DWORD - * FIXME: This function is for debugging, do not deal with - * the case of counters roll-over. - */ -static void iwl3945_accumulative_statistics(struct iwl_priv *priv, - __le32 *stats) -{ - int i; - __le32 *prev_stats; - u32 *accum_stats; - u32 *delta, *max_delta; - - prev_stats = (__le32 *)&priv->_3945.statistics; - accum_stats = (u32 *)&priv->_3945.accum_statistics; - delta = (u32 *)&priv->_3945.delta_statistics; - max_delta = (u32 *)&priv->_3945.max_delta; - - for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics); - i += sizeof(__le32), stats++, prev_stats++, delta++, - max_delta++, accum_stats++) { - if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { - *delta = (le32_to_cpu(*stats) - - le32_to_cpu(*prev_stats)); - *accum_stats += *delta; - if (*delta > *max_delta) - *max_delta = *delta; - } - } - - /* reset accumulative statistics for "no-counter" type statistics */ - priv->_3945.accum_statistics.general.temperature = - priv->_3945.statistics.general.temperature; - priv->_3945.accum_statistics.general.ttl_timestamp = - priv->_3945.statistics.general.ttl_timestamp; -} -#endif - -/** - * iwl3945_good_plcp_health - checks for plcp error. - * - * When the plcp error is exceeding the thresholds, reset the radio - * to improve the throughput. - */ -static bool iwl3945_good_plcp_health(struct iwl_priv *priv, - struct iwl_rx_packet *pkt) -{ - bool rc = true; - struct iwl3945_notif_statistics current_stat; - int combined_plcp_delta; - unsigned int plcp_msec; - unsigned long plcp_received_jiffies; - - if (priv->cfg->base_params->plcp_delta_threshold == - IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) { - IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n"); - return rc; - } - memcpy(¤t_stat, pkt->u.raw, sizeof(struct - iwl3945_notif_statistics)); - /* - * check for plcp_err and trigger radio reset if it exceeds - * the plcp error threshold plcp_delta. - */ - plcp_received_jiffies = jiffies; - plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies - - (long) priv->plcp_jiffies); - priv->plcp_jiffies = plcp_received_jiffies; - /* - * check to make sure plcp_msec is not 0 to prevent division - * by zero. - */ - if (plcp_msec) { - combined_plcp_delta = - (le32_to_cpu(current_stat.rx.ofdm.plcp_err) - - le32_to_cpu(priv->_3945.statistics.rx.ofdm.plcp_err)); - - if ((combined_plcp_delta > 0) && - ((combined_plcp_delta * 100) / plcp_msec) > - priv->cfg->base_params->plcp_delta_threshold) { - /* - * if plcp_err exceed the threshold, the following - * data is printed in csv format: - * Text: plcp_err exceeded %d, - * Received ofdm.plcp_err, - * Current ofdm.plcp_err, - * combined_plcp_delta, - * plcp_msec - */ - IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, " - "%u, %d, %u mSecs\n", - priv->cfg->base_params->plcp_delta_threshold, - le32_to_cpu(current_stat.rx.ofdm.plcp_err), - combined_plcp_delta, plcp_msec); - /* - * Reset the RF radio due to the high plcp - * error rate - */ - rc = false; - } - } - return rc; -} - -void iwl3945_hw_rx_statistics(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - - IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n", - (int)sizeof(struct iwl3945_notif_statistics), - le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK); -#ifdef CONFIG_IWLWIFI_DEBUGFS - iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw); -#endif - iwl_recover_from_statistics(priv, pkt); - - memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics)); -} - -void iwl3945_reply_statistics(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - __le32 *flag = (__le32 *)&pkt->u.raw; - - if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) { -#ifdef CONFIG_IWLWIFI_DEBUGFS - memset(&priv->_3945.accum_statistics, 0, - sizeof(struct iwl3945_notif_statistics)); - memset(&priv->_3945.delta_statistics, 0, - sizeof(struct iwl3945_notif_statistics)); - memset(&priv->_3945.max_delta, 0, - sizeof(struct iwl3945_notif_statistics)); -#endif - IWL_DEBUG_RX(priv, "Statistics have been cleared\n"); - } - iwl3945_hw_rx_statistics(priv, rxb); -} - - -/****************************************************************************** - * - * Misc. internal state and helper functions - * - ******************************************************************************/ - -/* This is necessary only for a number of statistics, see the caller. */ -static int iwl3945_is_network_packet(struct iwl_priv *priv, - struct ieee80211_hdr *header) -{ - /* Filter incoming packets to determine if they are targeted toward - * this network, discarding packets coming from ourselves */ - switch (priv->iw_mode) { - case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ - /* packets to our IBSS update information */ - return !compare_ether_addr(header->addr3, priv->bssid); - case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ - /* packets to our IBSS update information */ - return !compare_ether_addr(header->addr2, priv->bssid); - default: - return 1; - } -} - -static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb, - struct ieee80211_rx_status *stats) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); - struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); - struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); - u16 len = le16_to_cpu(rx_hdr->len); - struct sk_buff *skb; - __le16 fc = hdr->frame_control; - - /* We received data from the HW, so stop the watchdog */ - if (unlikely(len + IWL39_RX_FRAME_SIZE > - PAGE_SIZE << priv->hw_params.rx_page_order)) { - IWL_DEBUG_DROP(priv, "Corruption detected!\n"); - return; - } - - /* We only process data packets if the interface is open */ - if (unlikely(!priv->is_open)) { - IWL_DEBUG_DROP_LIMIT(priv, - "Dropping packet while interface is not open.\n"); - return; - } - - skb = dev_alloc_skb(128); - if (!skb) { - IWL_ERR(priv, "dev_alloc_skb failed\n"); - return; - } - - if (!iwl3945_mod_params.sw_crypto) - iwl_set_decrypted_flag(priv, - (struct ieee80211_hdr *)rxb_addr(rxb), - le32_to_cpu(rx_end->status), stats); - - skb_add_rx_frag(skb, 0, rxb->page, - (void *)rx_hdr->payload - (void *)pkt, len); - - iwl_update_stats(priv, false, fc, len); - memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - - ieee80211_rx(priv->hw, skb); - priv->alloc_rxb_page--; - rxb->page = NULL; -} - -#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) - -static void iwl3945_rx_reply_rx(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status; - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); - struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); - struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); - u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg); - u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff); - u8 network_packet; - - rx_status.flag = 0; - rx_status.mactime = le64_to_cpu(rx_end->timestamp); - rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel), - rx_status.band); - - rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate); - if (rx_status.band == IEEE80211_BAND_5GHZ) - rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; - - rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) & - RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4; - - /* set the preamble flag if appropriate */ - if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - rx_status.flag |= RX_FLAG_SHORTPRE; - - if ((unlikely(rx_stats->phy_count > 20))) { - IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n", - rx_stats->phy_count); - return; - } - - if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) - || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status); - return; - } - - - - /* Convert 3945's rssi indicator to dBm */ - rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET; - - IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n", - rx_status.signal, rx_stats_sig_avg, - rx_stats_noise_diff); - - header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); - - network_packet = iwl3945_is_network_packet(priv, header); - - IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n", - network_packet ? '*' : ' ', - le16_to_cpu(rx_hdr->channel), - rx_status.signal, rx_status.signal, - rx_status.rate_idx); - - iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header); - - if (network_packet) { - priv->_3945.last_beacon_time = - le32_to_cpu(rx_end->beacon_timestamp); - priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp); - priv->_3945.last_rx_rssi = rx_status.signal; - } - - iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); -} - -int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, - struct iwl_tx_queue *txq, - dma_addr_t addr, u16 len, u8 reset, u8 pad) -{ - int count; - struct iwl_queue *q; - struct iwl3945_tfd *tfd, *tfd_tmp; - - q = &txq->q; - tfd_tmp = (struct iwl3945_tfd *)txq->tfds; - tfd = &tfd_tmp[q->write_ptr]; - - if (reset) - memset(tfd, 0, sizeof(*tfd)); - - count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); - - if ((count >= NUM_TFD_CHUNKS) || (count < 0)) { - IWL_ERR(priv, "Error can not send more than %d chunks\n", - NUM_TFD_CHUNKS); - return -EINVAL; - } - - tfd->tbs[count].addr = cpu_to_le32(addr); - tfd->tbs[count].len = cpu_to_le32(len); - - count++; - - tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) | - TFD_CTL_PAD_SET(pad)); - - return 0; -} - -/** - * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr] - * - * Does NOT advance any indexes - */ -void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) -{ - struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds; - int index = txq->q.read_ptr; - struct iwl3945_tfd *tfd = &tfd_tmp[index]; - struct pci_dev *dev = priv->pci_dev; - int i; - int counter; - - /* sanity check */ - counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); - if (counter > NUM_TFD_CHUNKS) { - IWL_ERR(priv, "Too many chunks: %i\n", counter); - /* @todo issue fatal error, it is quite serious situation */ - return; - } - - /* Unmap tx_cmd */ - if (counter) - pci_unmap_single(dev, - dma_unmap_addr(&txq->meta[index], mapping), - dma_unmap_len(&txq->meta[index], len), - PCI_DMA_TODEVICE); - - /* unmap chunks if any */ - - for (i = 1; i < counter; i++) - pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr), - le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE); - - /* free SKB */ - if (txq->txb) { - struct sk_buff *skb; - - skb = txq->txb[txq->q.read_ptr].skb; - - /* can be called from irqs-disabled context */ - if (skb) { - dev_kfree_skb_any(skb); - txq->txb[txq->q.read_ptr].skb = NULL; - } - } -} - -/** - * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: - * -*/ -void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, - struct iwl_device_cmd *cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, - int sta_id, int tx_id) -{ - u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value; - u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945); - u16 rate_mask; - int rate; - u8 rts_retry_limit; - u8 data_retry_limit; - __le32 tx_flags; - __le16 fc = hdr->frame_control; - struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; - - rate = iwl3945_rates[rate_index].plcp; - tx_flags = tx_cmd->tx_flags; - - /* We need to figure out how to get the sta->supp_rates while - * in this running context */ - rate_mask = IWL_RATES_MASK_3945; - - /* Set retry limit on DATA packets and Probe Responses*/ - if (ieee80211_is_probe_resp(fc)) - data_retry_limit = 3; - else - data_retry_limit = IWL_DEFAULT_TX_RETRY; - tx_cmd->data_retry_limit = data_retry_limit; - - if (tx_id >= IWL39_CMD_QUEUE_NUM) - rts_retry_limit = 3; - else - rts_retry_limit = 7; - - if (data_retry_limit < rts_retry_limit) - rts_retry_limit = data_retry_limit; - tx_cmd->rts_retry_limit = rts_retry_limit; - - tx_cmd->rate = rate; - tx_cmd->tx_flags = tx_flags; - - /* OFDM */ - tx_cmd->supp_rates[0] = - ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF; - - /* CCK */ - tx_cmd->supp_rates[1] = (rate_mask & 0xF); - - IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " - "cck/ofdm mask: 0x%x/0x%x\n", sta_id, - tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags), - tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]); -} - -static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate) -{ - unsigned long flags_spin; - struct iwl_station_entry *station; - - if (sta_id == IWL_INVALID_STATION) - return IWL_INVALID_STATION; - - spin_lock_irqsave(&priv->sta_lock, flags_spin); - station = &priv->stations[sta_id]; - - station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; - station->sta.rate_n_flags = cpu_to_le16(tx_rate); - station->sta.mode = STA_CONTROL_MODIFY_MSK; - iwl_send_add_sta(priv, &station->sta, CMD_ASYNC); - spin_unlock_irqrestore(&priv->sta_lock, flags_spin); - - IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n", - sta_id, tx_rate); - return sta_id; -} - -static void iwl3945_set_pwr_vmain(struct iwl_priv *priv) -{ -/* - * (for documentation purposes) - * to set power to V_AUX, do - - if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) { - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - - iwl_poll_bit(priv, CSR_GPIO_IN, - CSR_GPIO_IN_VAL_VAUX_PWR_SRC, - CSR_GPIO_IN_BIT_AUX_POWER, 5000); - } - */ - - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); - - iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, - CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */ -} - -static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma); - iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma); - iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0); - iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), - FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | - FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | - FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | - FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | - (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) | - FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | - (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) | - FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); - - /* fake read to flush all prev I/O */ - iwl_read_direct32(priv, FH39_RSSR_CTRL); - - return 0; -} - -static int iwl3945_tx_reset(struct iwl_priv *priv) -{ - - /* bypass mode */ - iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2); - - /* RA 0 is active */ - iwl_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01); - - /* all 6 fifo are active */ - iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f); - - iwl_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000); - iwl_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002); - iwl_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004); - iwl_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005); - - iwl_write_direct32(priv, FH39_TSSR_CBB_BASE, - priv->_3945.shared_phys); - - iwl_write_direct32(priv, FH39_TSSR_MSG_CONFIG, - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); - - - return 0; -} - -/** - * iwl3945_txq_ctx_reset - Reset TX queue context - * - * Destroys all DMA structures and initialize them again - */ -static int iwl3945_txq_ctx_reset(struct iwl_priv *priv) -{ - int rc; - int txq_id, slots_num; - - iwl3945_hw_txq_ctx_free(priv); - - /* allocate tx queue structure */ - rc = iwl_alloc_txq_mem(priv); - if (rc) - return rc; - - /* Tx CMD queue */ - rc = iwl3945_tx_reset(priv); - if (rc) - goto error; - - /* Tx queue(s) */ - for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { - slots_num = (txq_id == IWL39_CMD_QUEUE_NUM) ? - TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; - rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num, - txq_id); - if (rc) { - IWL_ERR(priv, "Tx %d queue init failed\n", txq_id); - goto error; - } - } - - return rc; - - error: - iwl3945_hw_txq_ctx_free(priv); - return rc; -} - - -/* - * Start up 3945's basic functionality after it has been reset - * (e.g. after platform boot, or shutdown via iwl_apm_stop()) - * NOTE: This does not load uCode nor start the embedded processor - */ -static int iwl3945_apm_init(struct iwl_priv *priv) -{ - int ret = iwl_apm_init(priv); - - /* Clear APMG (NIC's internal power management) interrupts */ - iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0); - iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF); - - /* Reset radio chip */ - iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); - - return ret; -} - -static void iwl3945_nic_config(struct iwl_priv *priv) -{ - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - unsigned long flags; - u8 rev_id = 0; - - spin_lock_irqsave(&priv->lock, flags); - - /* Determine HW type */ - pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id); - - IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id); - - if (rev_id & PCI_CFG_REV_ID_BIT_RTP) - IWL_DEBUG_INFO(priv, "RTP type\n"); - else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { - IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n"); - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_3945_MB); - } else { - IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n"); - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_3945_MM); - } - - if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) { - IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n"); - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC); - } else - IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n"); - - if ((eeprom->board_revision & 0xF0) == 0xD0) { - IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n", - eeprom->board_revision); - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); - } else { - IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n", - eeprom->board_revision); - iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); - } - - if (eeprom->almgor_m_version <= 1) { - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); - IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n", - eeprom->almgor_m_version); - } else { - IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n", - eeprom->almgor_m_version); - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); - } - spin_unlock_irqrestore(&priv->lock, flags); - - if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n"); - - if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) - IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n"); -} - -int iwl3945_hw_nic_init(struct iwl_priv *priv) -{ - int rc; - unsigned long flags; - struct iwl_rx_queue *rxq = &priv->rxq; - - spin_lock_irqsave(&priv->lock, flags); - priv->cfg->ops->lib->apm_ops.init(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl3945_set_pwr_vmain(priv); - - priv->cfg->ops->lib->apm_ops.config(priv); - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - rc = iwl_rx_queue_alloc(priv); - if (rc) { - IWL_ERR(priv, "Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - iwl3945_rx_queue_reset(priv, rxq); - - iwl3945_rx_replenish(priv); - - iwl3945_rx_init(priv, rxq); - - - /* Look at using this instead: - rxq->need_update = 1; - iwl_rx_queue_update_write_ptr(priv, rxq); - */ - - iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7); - - rc = iwl3945_txq_ctx_reset(priv); - if (rc) - return rc; - - set_bit(STATUS_INIT, &priv->status); - - return 0; -} - -/** - * iwl3945_hw_txq_ctx_free - Free TXQ Context - * - * Destroy all TX DMA queues and structures - */ -void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv) -{ - int txq_id; - - /* Tx queues */ - if (priv->txq) - for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; - txq_id++) - if (txq_id == IWL39_CMD_QUEUE_NUM) - iwl_cmd_queue_free(priv); - else - iwl_tx_queue_free(priv, txq_id); - - /* free tx queue structure */ - iwl_free_txq_mem(priv); -} - -void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv) -{ - int txq_id; - - /* stop SCD */ - iwl_write_prph(priv, ALM_SCD_MODE_REG, 0); - iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0); - - /* reset TFD queues */ - for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { - iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0); - iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS, - FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), - 1000); - } - - iwl3945_hw_txq_ctx_free(priv); -} - -/** - * iwl3945_hw_reg_adjust_power_by_temp - * return index delta into power gain settings table -*/ -static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) -{ - return (new_reading - old_reading) * (-11) / 100; -} - -/** - * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range - */ -static inline int iwl3945_hw_reg_temp_out_of_range(int temperature) -{ - return ((temperature < -260) || (temperature > 25)) ? 1 : 0; -} - -int iwl3945_hw_get_temperature(struct iwl_priv *priv) -{ - return iwl_read32(priv, CSR_UCODE_DRV_GP2); -} - -/** - * iwl3945_hw_reg_txpower_get_temperature - * get the current temperature by reading from NIC -*/ -static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv) -{ - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - int temperature; - - temperature = iwl3945_hw_get_temperature(priv); - - /* driver's okay range is -260 to +25. - * human readable okay range is 0 to +285 */ - IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT); - - /* handle insane temp reading */ - if (iwl3945_hw_reg_temp_out_of_range(temperature)) { - IWL_ERR(priv, "Error bad temperature value %d\n", temperature); - - /* if really really hot(?), - * substitute the 3rd band/group's temp measured at factory */ - if (priv->last_temperature > 100) - temperature = eeprom->groups[2].temperature; - else /* else use most recent "sane" value from driver */ - temperature = priv->last_temperature; - } - - return temperature; /* raw, not "human readable" */ -} - -/* Adjust Txpower only if temperature variance is greater than threshold. - * - * Both are lower than older versions' 9 degrees */ -#define IWL_TEMPERATURE_LIMIT_TIMER 6 - -/** - * is_temp_calib_needed - determines if new calibration is needed - * - * records new temperature in tx_mgr->temperature. - * replaces tx_mgr->last_temperature *only* if calib needed - * (assumes caller will actually do the calibration!). */ -static int is_temp_calib_needed(struct iwl_priv *priv) -{ - int temp_diff; - - priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv); - temp_diff = priv->temperature - priv->last_temperature; - - /* get absolute value */ - if (temp_diff < 0) { - IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff); - temp_diff = -temp_diff; - } else if (temp_diff == 0) - IWL_DEBUG_POWER(priv, "Same temp,\n"); - else - IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff); - - /* if we don't need calibration, *don't* update last_temperature */ - if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) { - IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n"); - return 0; - } - - IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n"); - - /* assume that caller will actually do calib ... - * update the "last temperature" value */ - priv->last_temperature = priv->temperature; - return 1; -} - -#define IWL_MAX_GAIN_ENTRIES 78 -#define IWL_CCK_FROM_OFDM_POWER_DIFF -5 -#define IWL_CCK_FROM_OFDM_INDEX_DIFF (10) - -/* radio and DSP power table, each step is 1/2 dB. - * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ -static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = { - { - {251, 127}, /* 2.4 GHz, highest power */ - {251, 127}, - {251, 127}, - {251, 127}, - {251, 125}, - {251, 110}, - {251, 105}, - {251, 98}, - {187, 125}, - {187, 115}, - {187, 108}, - {187, 99}, - {243, 119}, - {243, 111}, - {243, 105}, - {243, 97}, - {243, 92}, - {211, 106}, - {211, 100}, - {179, 120}, - {179, 113}, - {179, 107}, - {147, 125}, - {147, 119}, - {147, 112}, - {147, 106}, - {147, 101}, - {147, 97}, - {147, 91}, - {115, 107}, - {235, 121}, - {235, 115}, - {235, 109}, - {203, 127}, - {203, 121}, - {203, 115}, - {203, 108}, - {203, 102}, - {203, 96}, - {203, 92}, - {171, 110}, - {171, 104}, - {171, 98}, - {139, 116}, - {227, 125}, - {227, 119}, - {227, 113}, - {227, 107}, - {227, 101}, - {227, 96}, - {195, 113}, - {195, 106}, - {195, 102}, - {195, 95}, - {163, 113}, - {163, 106}, - {163, 102}, - {163, 95}, - {131, 113}, - {131, 106}, - {131, 102}, - {131, 95}, - {99, 113}, - {99, 106}, - {99, 102}, - {99, 95}, - {67, 113}, - {67, 106}, - {67, 102}, - {67, 95}, - {35, 113}, - {35, 106}, - {35, 102}, - {35, 95}, - {3, 113}, - {3, 106}, - {3, 102}, - {3, 95} }, /* 2.4 GHz, lowest power */ - { - {251, 127}, /* 5.x GHz, highest power */ - {251, 120}, - {251, 114}, - {219, 119}, - {219, 101}, - {187, 113}, - {187, 102}, - {155, 114}, - {155, 103}, - {123, 117}, - {123, 107}, - {123, 99}, - {123, 92}, - {91, 108}, - {59, 125}, - {59, 118}, - {59, 109}, - {59, 102}, - {59, 96}, - {59, 90}, - {27, 104}, - {27, 98}, - {27, 92}, - {115, 118}, - {115, 111}, - {115, 104}, - {83, 126}, - {83, 121}, - {83, 113}, - {83, 105}, - {83, 99}, - {51, 118}, - {51, 111}, - {51, 104}, - {51, 98}, - {19, 116}, - {19, 109}, - {19, 102}, - {19, 98}, - {19, 93}, - {171, 113}, - {171, 107}, - {171, 99}, - {139, 120}, - {139, 113}, - {139, 107}, - {139, 99}, - {107, 120}, - {107, 113}, - {107, 107}, - {107, 99}, - {75, 120}, - {75, 113}, - {75, 107}, - {75, 99}, - {43, 120}, - {43, 113}, - {43, 107}, - {43, 99}, - {11, 120}, - {11, 113}, - {11, 107}, - {11, 99}, - {131, 107}, - {131, 99}, - {99, 120}, - {99, 113}, - {99, 107}, - {99, 99}, - {67, 120}, - {67, 113}, - {67, 107}, - {67, 99}, - {35, 120}, - {35, 113}, - {35, 107}, - {35, 99}, - {3, 120} } /* 5.x GHz, lowest power */ -}; - -static inline u8 iwl3945_hw_reg_fix_power_index(int index) -{ - if (index < 0) - return 0; - if (index >= IWL_MAX_GAIN_ENTRIES) - return IWL_MAX_GAIN_ENTRIES - 1; - return (u8) index; -} - -/* Kick off thermal recalibration check every 60 seconds */ -#define REG_RECALIB_PERIOD (60) - -/** - * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests - * - * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) - * or 6 Mbit (OFDM) rates. - */ -static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index, - s32 rate_index, const s8 *clip_pwrs, - struct iwl_channel_info *ch_info, - int band_index) -{ - struct iwl3945_scan_power_info *scan_power_info; - s8 power; - u8 power_index; - - scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index]; - - /* use this channel group's 6Mbit clipping/saturation pwr, - * but cap at regulatory scan power restriction (set during init - * based on eeprom channel data) for this channel. */ - power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]); - - /* further limit to user's max power preference. - * FIXME: Other spectrum management power limitations do not - * seem to apply?? */ - power = min(power, priv->tx_power_user_lmt); - scan_power_info->requested_power = power; - - /* find difference between new scan *power* and current "normal" - * Tx *power* for 6Mb. Use this difference (x2) to adjust the - * current "normal" temperature-compensated Tx power *index* for - * this rate (1Mb or 6Mb) to yield new temp-compensated scan power - * *index*. */ - power_index = ch_info->power_info[rate_index].power_table_index - - (power - ch_info->power_info - [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2; - - /* store reference index that we use when adjusting *all* scan - * powers. So we can accommodate user (all channel) or spectrum - * management (single channel) power changes "between" temperature - * feedback compensation procedures. - * don't force fit this reference index into gain table; it may be a - * negative number. This will help avoid errors when we're at - * the lower bounds (highest gains, for warmest temperatures) - * of the table. */ - - /* don't exceed table bounds for "real" setting */ - power_index = iwl3945_hw_reg_fix_power_index(power_index); - - scan_power_info->power_table_index = power_index; - scan_power_info->tpc.tx_gain = - power_gain_table[band_index][power_index].tx_gain; - scan_power_info->tpc.dsp_atten = - power_gain_table[band_index][power_index].dsp_atten; -} - -/** - * iwl3945_send_tx_power - fill in Tx Power command with gain settings - * - * Configures power settings for all rates for the current channel, - * using values from channel info struct, and send to NIC - */ -static int iwl3945_send_tx_power(struct iwl_priv *priv) -{ - int rate_idx, i; - const struct iwl_channel_info *ch_info = NULL; - struct iwl3945_txpowertable_cmd txpower = { - .channel = priv->contexts[IWL_RXON_CTX_BSS].active.channel, - }; - u16 chan; - - if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), - "TX Power requested while scanning!\n")) - return -EAGAIN; - - chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel); - - txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1; - ch_info = iwl_get_channel_info(priv, priv->band, chan); - if (!ch_info) { - IWL_ERR(priv, - "Failed to get channel info for channel %d [%d]\n", - chan, priv->band); - return -EINVAL; - } - - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on " - "non-Tx channel.\n"); - return 0; - } - - /* fill cmd with power settings for all rates for current channel */ - /* Fill OFDM rate */ - for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0; - rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) { - - txpower.power[i].tpc = ch_info->power_info[i].tpc; - txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; - - IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n", - le16_to_cpu(txpower.channel), - txpower.band, - txpower.power[i].tpc.tx_gain, - txpower.power[i].tpc.dsp_atten, - txpower.power[i].rate); - } - /* Fill CCK rates */ - for (rate_idx = IWL_FIRST_CCK_RATE; - rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) { - txpower.power[i].tpc = ch_info->power_info[i].tpc; - txpower.power[i].rate = iwl3945_rates[rate_idx].plcp; - - IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n", - le16_to_cpu(txpower.channel), - txpower.band, - txpower.power[i].tpc.tx_gain, - txpower.power[i].tpc.dsp_atten, - txpower.power[i].rate); - } - - return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, - sizeof(struct iwl3945_txpowertable_cmd), - &txpower); - -} - -/** - * iwl3945_hw_reg_set_new_power - Configures power tables at new levels - * @ch_info: Channel to update. Uses power_info.requested_power. - * - * Replace requested_power and base_power_index ch_info fields for - * one channel. - * - * Called if user or spectrum management changes power preferences. - * Takes into account h/w and modulation limitations (clip power). - * - * This does *not* send anything to NIC, just sets up ch_info for one channel. - * - * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to - * properly fill out the scan powers, and actual h/w gain settings, - * and send changes to NIC - */ -static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv, - struct iwl_channel_info *ch_info) -{ - struct iwl3945_channel_power_info *power_info; - int power_changed = 0; - int i; - const s8 *clip_pwrs; - int power; - - /* Get this chnlgrp's rate-to-max/clip-powers table */ - clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers; - - /* Get this channel's rate-to-current-power settings table */ - power_info = ch_info->power_info; - - /* update OFDM Txpower settings */ - for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; - i++, ++power_info) { - int delta_idx; - - /* limit new power to be no more than h/w capability */ - power = min(ch_info->curr_txpow, clip_pwrs[i]); - if (power == power_info->requested_power) - continue; - - /* find difference between old and new requested powers, - * update base (non-temp-compensated) power index */ - delta_idx = (power - power_info->requested_power) * 2; - power_info->base_power_index -= delta_idx; - - /* save new requested power value */ - power_info->requested_power = power; - - power_changed = 1; - } - - /* update CCK Txpower settings, based on OFDM 12M setting ... - * ... all CCK power settings for a given channel are the *same*. */ - if (power_changed) { - power = - ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. - requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF; - - /* do all CCK rates' iwl3945_channel_power_info structures */ - for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) { - power_info->requested_power = power; - power_info->base_power_index = - ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. - base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF; - ++power_info; - } - } - - return 0; -} - -/** - * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel - * - * NOTE: Returned power limit may be less (but not more) than requested, - * based strictly on regulatory (eeprom and spectrum mgt) limitations - * (no consideration for h/w clipping limitations). - */ -static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info) -{ - s8 max_power; - -#if 0 - /* if we're using TGd limits, use lower of TGd or EEPROM */ - if (ch_info->tgd_data.max_power != 0) - max_power = min(ch_info->tgd_data.max_power, - ch_info->eeprom.max_power_avg); - - /* else just use EEPROM limits */ - else -#endif - max_power = ch_info->eeprom.max_power_avg; - - return min(max_power, ch_info->max_power_avg); -} - -/** - * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature - * - * Compensate txpower settings of *all* channels for temperature. - * This only accounts for the difference between current temperature - * and the factory calibration temperatures, and bases the new settings - * on the channel's base_power_index. - * - * If RxOn is "associated", this sends the new Txpower to NIC! - */ -static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv) -{ - struct iwl_channel_info *ch_info = NULL; - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - int delta_index; - const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ - u8 a_band; - u8 rate_index; - u8 scan_tbl_index; - u8 i; - int ref_temp; - int temperature = priv->temperature; - - if (priv->disable_tx_power_cal || - test_bit(STATUS_SCANNING, &priv->status)) { - /* do not perform tx power calibration */ - return 0; - } - /* set up new Tx power info for each and every channel, 2.4 and 5.x */ - for (i = 0; i < priv->channel_count; i++) { - ch_info = &priv->channel_info[i]; - a_band = is_channel_a_band(ch_info); - - /* Get this chnlgrp's factory calibration temperature */ - ref_temp = (s16)eeprom->groups[ch_info->group_index]. - temperature; - - /* get power index adjustment based on current and factory - * temps */ - delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, - ref_temp); - - /* set tx power value for all rates, OFDM and CCK */ - for (rate_index = 0; rate_index < IWL_RATE_COUNT_3945; - rate_index++) { - int power_idx = - ch_info->power_info[rate_index].base_power_index; - - /* temperature compensate */ - power_idx += delta_index; - - /* stay within table range */ - power_idx = iwl3945_hw_reg_fix_power_index(power_idx); - ch_info->power_info[rate_index]. - power_table_index = (u8) power_idx; - ch_info->power_info[rate_index].tpc = - power_gain_table[a_band][power_idx]; - } - - /* Get this chnlgrp's rate-to-max/clip-powers table */ - clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers; - - /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ - for (scan_tbl_index = 0; - scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { - s32 actual_index = (scan_tbl_index == 0) ? - IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; - iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, - actual_index, clip_pwrs, - ch_info, a_band); - } - } - - /* send Txpower command for current channel to ucode */ - return priv->cfg->ops->lib->send_tx_power(priv); -} - -int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power) -{ - struct iwl_channel_info *ch_info; - s8 max_power; - u8 a_band; - u8 i; - - if (priv->tx_power_user_lmt == power) { - IWL_DEBUG_POWER(priv, "Requested Tx power same as current " - "limit: %ddBm.\n", power); - return 0; - } - - IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power); - priv->tx_power_user_lmt = power; - - /* set up new Tx powers for each and every channel, 2.4 and 5.x */ - - for (i = 0; i < priv->channel_count; i++) { - ch_info = &priv->channel_info[i]; - a_band = is_channel_a_band(ch_info); - - /* find minimum power of all user and regulatory constraints - * (does not consider h/w clipping limitations) */ - max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info); - max_power = min(power, max_power); - if (max_power != ch_info->curr_txpow) { - ch_info->curr_txpow = max_power; - - /* this considers the h/w clipping limitations */ - iwl3945_hw_reg_set_new_power(priv, ch_info); - } - } - - /* update txpower settings for all channels, - * send to NIC if associated. */ - is_temp_calib_needed(priv); - iwl3945_hw_reg_comp_txpower_temp(priv); - - return 0; -} - -static int iwl3945_send_rxon_assoc(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - int rc = 0; - struct iwl_rx_packet *pkt; - struct iwl3945_rxon_assoc_cmd rxon_assoc; - struct iwl_host_cmd cmd = { - .id = REPLY_RXON_ASSOC, - .len = sizeof(rxon_assoc), - .flags = CMD_WANT_SKB, - .data = &rxon_assoc, - }; - const struct iwl_rxon_cmd *rxon1 = &ctx->staging; - const struct iwl_rxon_cmd *rxon2 = &ctx->active; - - if ((rxon1->flags == rxon2->flags) && - (rxon1->filter_flags == rxon2->filter_flags) && - (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && - (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { - IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n"); - return 0; - } - - rxon_assoc.flags = ctx->staging.flags; - rxon_assoc.filter_flags = ctx->staging.filter_flags; - rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; - rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; - rxon_assoc.reserved = 0; - - rc = iwl_send_cmd_sync(priv, &cmd); - if (rc) - return rc; - - pkt = (struct iwl_rx_packet *)cmd.reply_page; - if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n"); - rc = -EIO; - } - - iwl_free_pages(priv, cmd.reply_page); - - return rc; -} - -/** - * iwl3945_commit_rxon - commit staging_rxon to hardware - * - * The RXON command in staging_rxon is committed to the hardware and - * the active_rxon structure is updated with the new data. This - * function correctly transitions out of the RXON_ASSOC_MSK state if - * a HW tune is required based on the RXON structure changes. - */ -int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - /* cast away the const for active_rxon in this function */ - struct iwl3945_rxon_cmd *active_rxon = (void *)&ctx->active; - struct iwl3945_rxon_cmd *staging_rxon = (void *)&ctx->staging; - int rc = 0; - bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return -EINVAL; - - if (!iwl_is_alive(priv)) - return -1; - - /* always get timestamp with Rx frame */ - staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK; - - /* select antenna */ - staging_rxon->flags &= - ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK); - staging_rxon->flags |= iwl3945_get_antenna_flags(priv); - - rc = iwl_check_rxon_cmd(priv, ctx); - if (rc) { - IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); - return -EINVAL; - } - - /* If we don't need to send a full RXON, we can use - * iwl3945_rxon_assoc_cmd which is used to reconfigure filter - * and other flags for the current radio configuration. */ - if (!iwl_full_rxon_required(priv, &priv->contexts[IWL_RXON_CTX_BSS])) { - rc = iwl_send_rxon_assoc(priv, - &priv->contexts[IWL_RXON_CTX_BSS]); - if (rc) { - IWL_ERR(priv, "Error setting RXON_ASSOC " - "configuration (%d).\n", rc); - return rc; - } - - memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); - - return 0; - } - - /* If we are currently associated and the new config requires - * an RXON_ASSOC and the new config wants the associated mask enabled, - * we must clear the associated from the active configuration - * before we apply the new config */ - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS) && new_assoc) { - IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n"); - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - /* - * reserved4 and 5 could have been filled by the iwlcore code. - * Let's clear them before pushing to the 3945. - */ - active_rxon->reserved4 = 0; - active_rxon->reserved5 = 0; - rc = iwl_send_cmd_pdu(priv, REPLY_RXON, - sizeof(struct iwl3945_rxon_cmd), - &priv->contexts[IWL_RXON_CTX_BSS].active); - - /* If the mask clearing failed then we set - * active_rxon back to what it was previously */ - if (rc) { - active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; - IWL_ERR(priv, "Error clearing ASSOC_MSK on current " - "configuration (%d).\n", rc); - return rc; - } - iwl_clear_ucode_stations(priv, - &priv->contexts[IWL_RXON_CTX_BSS]); - iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]); - } - - IWL_DEBUG_INFO(priv, "Sending RXON\n" - "* with%s RXON_FILTER_ASSOC_MSK\n" - "* channel = %d\n" - "* bssid = %pM\n", - (new_assoc ? "" : "out"), - le16_to_cpu(staging_rxon->channel), - staging_rxon->bssid_addr); - - /* - * reserved4 and 5 could have been filled by the iwlcore code. - * Let's clear them before pushing to the 3945. - */ - staging_rxon->reserved4 = 0; - staging_rxon->reserved5 = 0; - - iwl_set_rxon_hwcrypto(priv, ctx, !iwl3945_mod_params.sw_crypto); - - /* Apply the new configuration */ - rc = iwl_send_cmd_pdu(priv, REPLY_RXON, - sizeof(struct iwl3945_rxon_cmd), - staging_rxon); - if (rc) { - IWL_ERR(priv, "Error setting new configuration (%d).\n", rc); - return rc; - } - - memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); - - if (!new_assoc) { - iwl_clear_ucode_stations(priv, - &priv->contexts[IWL_RXON_CTX_BSS]); - iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]); - } - - /* If we issue a new RXON command which required a tune then we must - * send a new TXPOWER command or we won't be able to Tx any frames */ - rc = iwl_set_tx_power(priv, priv->tx_power_next, true); - if (rc) { - IWL_ERR(priv, "Error setting Tx power (%d).\n", rc); - return rc; - } - - /* Init the hardware's rate fallback order based on the band */ - rc = iwl3945_init_hw_rate_table(priv); - if (rc) { - IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc); - return -EIO; - } - - return 0; -} - -/** - * iwl3945_reg_txpower_periodic - called when time to check our temperature. - * - * -- reset periodic timer - * -- see if temp has changed enough to warrant re-calibration ... if so: - * -- correct coeffs for temp (can reset temp timer) - * -- save this temp as "last", - * -- send new set of gain settings to NIC - * NOTE: This should continue working, even when we're not associated, - * so we can keep our internal table of scan powers current. */ -void iwl3945_reg_txpower_periodic(struct iwl_priv *priv) -{ - /* This will kick in the "brute force" - * iwl3945_hw_reg_comp_txpower_temp() below */ - if (!is_temp_calib_needed(priv)) - goto reschedule; - - /* Set up a new set of temp-adjusted TxPowers, send to NIC. - * This is based *only* on current temperature, - * ignoring any previous power measurements */ - iwl3945_hw_reg_comp_txpower_temp(priv); - - reschedule: - queue_delayed_work(priv->workqueue, - &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ); -} - -static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - _3945.thermal_periodic.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_reg_txpower_periodic(priv); - mutex_unlock(&priv->mutex); -} - -/** - * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4) - * for the channel. - * - * This function is used when initializing channel-info structs. - * - * NOTE: These channel groups do *NOT* match the bands above! - * These channel groups are based on factory-tested channels; - * on A-band, EEPROM's "group frequency" entries represent the top - * channel in each group 1-4. Group 5 All B/G channels are in group 0. - */ -static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv, - const struct iwl_channel_info *ch_info) -{ - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0]; - u8 group; - u16 group_index = 0; /* based on factory calib frequencies */ - u8 grp_channel; - - /* Find the group index for the channel ... don't use index 1(?) */ - if (is_channel_a_band(ch_info)) { - for (group = 1; group < 5; group++) { - grp_channel = ch_grp[group].group_channel; - if (ch_info->channel <= grp_channel) { - group_index = group; - break; - } - } - /* group 4 has a few channels *above* its factory cal freq */ - if (group == 5) - group_index = 4; - } else - group_index = 0; /* 2.4 GHz, group 0 */ - - IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel, - group_index); - return group_index; -} - -/** - * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index - * - * Interpolate to get nominal (i.e. at factory calibration temperature) index - * into radio/DSP gain settings table for requested power. - */ -static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv, - s8 requested_power, - s32 setting_index, s32 *new_index) -{ - const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL; - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - s32 index0, index1; - s32 power = 2 * requested_power; - s32 i; - const struct iwl3945_eeprom_txpower_sample *samples; - s32 gains0, gains1; - s32 res; - s32 denominator; - - chnl_grp = &eeprom->groups[setting_index]; - samples = chnl_grp->samples; - for (i = 0; i < 5; i++) { - if (power == samples[i].power) { - *new_index = samples[i].gain_index; - return 0; - } - } - - if (power > samples[1].power) { - index0 = 0; - index1 = 1; - } else if (power > samples[2].power) { - index0 = 1; - index1 = 2; - } else if (power > samples[3].power) { - index0 = 2; - index1 = 3; - } else { - index0 = 3; - index1 = 4; - } - - denominator = (s32) samples[index1].power - (s32) samples[index0].power; - if (denominator == 0) - return -EINVAL; - gains0 = (s32) samples[index0].gain_index * (1 << 19); - gains1 = (s32) samples[index1].gain_index * (1 << 19); - res = gains0 + (gains1 - gains0) * - ((s32) power - (s32) samples[index0].power) / denominator + - (1 << 18); - *new_index = res >> 19; - return 0; -} - -static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv) -{ - u32 i; - s32 rate_index; - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - const struct iwl3945_eeprom_txpower_group *group; - - IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n"); - - for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) { - s8 *clip_pwrs; /* table of power levels for each rate */ - s8 satur_pwr; /* saturation power for each chnl group */ - group = &eeprom->groups[i]; - - /* sanity check on factory saturation power value */ - if (group->saturation_power < 40) { - IWL_WARN(priv, "Error: saturation power is %d, " - "less than minimum expected 40\n", - group->saturation_power); - return; - } - - /* - * Derive requested power levels for each rate, based on - * hardware capabilities (saturation power for band). - * Basic value is 3dB down from saturation, with further - * power reductions for highest 3 data rates. These - * backoffs provide headroom for high rate modulation - * power peaks, without too much distortion (clipping). - */ - /* we'll fill in this array with h/w max power levels */ - clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers; - - /* divide factory saturation power by 2 to find -3dB level */ - satur_pwr = (s8) (group->saturation_power >> 1); - - /* fill in channel group's nominal powers for each rate */ - for (rate_index = 0; - rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) { - switch (rate_index) { - case IWL_RATE_36M_INDEX_TABLE: - if (i == 0) /* B/G */ - *clip_pwrs = satur_pwr; - else /* A */ - *clip_pwrs = satur_pwr - 5; - break; - case IWL_RATE_48M_INDEX_TABLE: - if (i == 0) - *clip_pwrs = satur_pwr - 7; - else - *clip_pwrs = satur_pwr - 10; - break; - case IWL_RATE_54M_INDEX_TABLE: - if (i == 0) - *clip_pwrs = satur_pwr - 9; - else - *clip_pwrs = satur_pwr - 12; - break; - default: - *clip_pwrs = satur_pwr; - break; - } - } - } -} - -/** - * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM - * - * Second pass (during init) to set up priv->channel_info - * - * Set up Tx-power settings in our channel info database for each VALID - * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values - * and current temperature. - * - * Since this is based on current temperature (at init time), these values may - * not be valid for very long, but it gives us a starting/default point, - * and allows us to active (i.e. using Tx) scan. - * - * This does *not* write values to NIC, just sets up our internal table. - */ -int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv) -{ - struct iwl_channel_info *ch_info = NULL; - struct iwl3945_channel_power_info *pwr_info; - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - int delta_index; - u8 rate_index; - u8 scan_tbl_index; - const s8 *clip_pwrs; /* array of power levels for each rate */ - u8 gain, dsp_atten; - s8 power; - u8 pwr_index, base_pwr_index, a_band; - u8 i; - int temperature; - - /* save temperature reference, - * so we can determine next time to calibrate */ - temperature = iwl3945_hw_reg_txpower_get_temperature(priv); - priv->last_temperature = temperature; - - iwl3945_hw_reg_init_channel_groups(priv); - - /* initialize Tx power info for each and every channel, 2.4 and 5.x */ - for (i = 0, ch_info = priv->channel_info; i < priv->channel_count; - i++, ch_info++) { - a_band = is_channel_a_band(ch_info); - if (!is_channel_valid(ch_info)) - continue; - - /* find this channel's channel group (*not* "band") index */ - ch_info->group_index = - iwl3945_hw_reg_get_ch_grp_index(priv, ch_info); - - /* Get this chnlgrp's rate->max/clip-powers table */ - clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers; - - /* calculate power index *adjustment* value according to - * diff between current temperature and factory temperature */ - delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature, - eeprom->groups[ch_info->group_index]. - temperature); - - IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n", - ch_info->channel, delta_index, temperature + - IWL_TEMP_CONVERT); - - /* set tx power value for all OFDM rates */ - for (rate_index = 0; rate_index < IWL_OFDM_RATES; - rate_index++) { - s32 uninitialized_var(power_idx); - int rc; - - /* use channel group's clip-power table, - * but don't exceed channel's max power */ - s8 pwr = min(ch_info->max_power_avg, - clip_pwrs[rate_index]); - - pwr_info = &ch_info->power_info[rate_index]; - - /* get base (i.e. at factory-measured temperature) - * power table index for this rate's power */ - rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr, - ch_info->group_index, - &power_idx); - if (rc) { - IWL_ERR(priv, "Invalid power index\n"); - return rc; - } - pwr_info->base_power_index = (u8) power_idx; - - /* temperature compensate */ - power_idx += delta_index; - - /* stay within range of gain table */ - power_idx = iwl3945_hw_reg_fix_power_index(power_idx); - - /* fill 1 OFDM rate's iwl3945_channel_power_info struct */ - pwr_info->requested_power = pwr; - pwr_info->power_table_index = (u8) power_idx; - pwr_info->tpc.tx_gain = - power_gain_table[a_band][power_idx].tx_gain; - pwr_info->tpc.dsp_atten = - power_gain_table[a_band][power_idx].dsp_atten; - } - - /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/ - pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]; - power = pwr_info->requested_power + - IWL_CCK_FROM_OFDM_POWER_DIFF; - pwr_index = pwr_info->power_table_index + - IWL_CCK_FROM_OFDM_INDEX_DIFF; - base_pwr_index = pwr_info->base_power_index + - IWL_CCK_FROM_OFDM_INDEX_DIFF; - - /* stay within table range */ - pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index); - gain = power_gain_table[a_band][pwr_index].tx_gain; - dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten; - - /* fill each CCK rate's iwl3945_channel_power_info structure - * NOTE: All CCK-rate Txpwrs are the same for a given chnl! - * NOTE: CCK rates start at end of OFDM rates! */ - for (rate_index = 0; - rate_index < IWL_CCK_RATES; rate_index++) { - pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES]; - pwr_info->requested_power = power; - pwr_info->power_table_index = pwr_index; - pwr_info->base_power_index = base_pwr_index; - pwr_info->tpc.tx_gain = gain; - pwr_info->tpc.dsp_atten = dsp_atten; - } - - /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ - for (scan_tbl_index = 0; - scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { - s32 actual_index = (scan_tbl_index == 0) ? - IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; - iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index, - actual_index, clip_pwrs, ch_info, a_band); - } - } - - return 0; -} - -int iwl3945_hw_rxq_stop(struct iwl_priv *priv) -{ - int rc; - - iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0); - rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS, - FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); - if (rc < 0) - IWL_ERR(priv, "Can't stop Rx DMA.\n"); - - return 0; -} - -int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq) -{ - int txq_id = txq->q.id; - - struct iwl3945_shared *shared_data = priv->_3945.shared_virt; - - shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr); - - iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0); - iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0); - - iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), - FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | - FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | - FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | - FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | - FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); - - /* fake read to flush all prev. writes */ - iwl_read32(priv, FH39_TSSR_CBB_BASE); - - return 0; -} - -/* - * HCMD utils - */ -static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len) -{ - switch (cmd_id) { - case REPLY_RXON: - return sizeof(struct iwl3945_rxon_cmd); - case POWER_TABLE_CMD: - return sizeof(struct iwl3945_powertable_cmd); - default: - return len; - } -} - - -static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) -{ - struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data; - addsta->mode = cmd->mode; - memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); - memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); - addsta->station_flags = cmd->station_flags; - addsta->station_flags_msk = cmd->station_flags_msk; - addsta->tid_disable_tx = cpu_to_le16(0); - addsta->rate_n_flags = cmd->rate_n_flags; - addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; - addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; - addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; - - return (u16)sizeof(struct iwl3945_addsta_cmd); -} - -static int iwl3945_add_bssid_station(struct iwl_priv *priv, - const u8 *addr, u8 *sta_id_r) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - int ret; - u8 sta_id; - unsigned long flags; - - if (sta_id_r) - *sta_id_r = IWL_INVALID_STATION; - - ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id); - if (ret) { - IWL_ERR(priv, "Unable to add station %pM\n", addr); - return ret; - } - - if (sta_id_r) - *sta_id_r = sta_id; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].used |= IWL_STA_LOCAL; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return 0; -} -static int iwl3945_manage_ibss_station(struct iwl_priv *priv, - struct ieee80211_vif *vif, bool add) -{ - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - int ret; - - if (add) { - ret = iwl3945_add_bssid_station(priv, vif->bss_conf.bssid, - &vif_priv->ibss_bssid_sta_id); - if (ret) - return ret; - - iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id, - (priv->band == IEEE80211_BAND_5GHZ) ? - IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP); - iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id); - - return 0; - } - - return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id, - vif->bss_conf.bssid); -} - -/** - * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table - */ -int iwl3945_init_hw_rate_table(struct iwl_priv *priv) -{ - int rc, i, index, prev_index; - struct iwl3945_rate_scaling_cmd rate_cmd = { - .reserved = {0, 0, 0}, - }; - struct iwl3945_rate_scaling_info *table = rate_cmd.table; - - for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) { - index = iwl3945_rates[i].table_rs_index; - - table[index].rate_n_flags = - iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0); - table[index].try_cnt = priv->retry_rate; - prev_index = iwl3945_get_prev_ieee_rate(i); - table[index].next_rate_index = - iwl3945_rates[prev_index].table_rs_index; - } - - switch (priv->band) { - case IEEE80211_BAND_5GHZ: - IWL_DEBUG_RATE(priv, "Select A mode rate scale\n"); - /* If one of the following CCK rates is used, - * have it fall back to the 6M OFDM rate */ - for (i = IWL_RATE_1M_INDEX_TABLE; - i <= IWL_RATE_11M_INDEX_TABLE; i++) - table[i].next_rate_index = - iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; - - /* Don't fall back to CCK rates */ - table[IWL_RATE_12M_INDEX_TABLE].next_rate_index = - IWL_RATE_9M_INDEX_TABLE; - - /* Don't drop out of OFDM rates */ - table[IWL_RATE_6M_INDEX_TABLE].next_rate_index = - iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index; - break; - - case IEEE80211_BAND_2GHZ: - IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n"); - /* If an OFDM rate is used, have it fall back to the - * 1M CCK rates */ - - if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) && - iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { - - index = IWL_FIRST_CCK_RATE; - for (i = IWL_RATE_6M_INDEX_TABLE; - i <= IWL_RATE_54M_INDEX_TABLE; i++) - table[i].next_rate_index = - iwl3945_rates[index].table_rs_index; - - index = IWL_RATE_11M_INDEX_TABLE; - /* CCK shouldn't fall back to OFDM... */ - table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE; - } - break; - - default: - WARN_ON(1); - break; - } - - /* Update the rate scaling for control frame Tx */ - rate_cmd.table_id = 0; - rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), - &rate_cmd); - if (rc) - return rc; - - /* Update the rate scaling for data frame Tx */ - rate_cmd.table_id = 1; - return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), - &rate_cmd); -} - -/* Called when initializing driver */ -int iwl3945_hw_set_hw_params(struct iwl_priv *priv) -{ - memset((void *)&priv->hw_params, 0, - sizeof(struct iwl_hw_params)); - - priv->_3945.shared_virt = - dma_alloc_coherent(&priv->pci_dev->dev, - sizeof(struct iwl3945_shared), - &priv->_3945.shared_phys, GFP_KERNEL); - if (!priv->_3945.shared_virt) { - IWL_ERR(priv, "failed to allocate pci memory\n"); - return -ENOMEM; - } - - /* Assign number of Usable TX queues */ - priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues; - - priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd); - priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K); - priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; - priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; - priv->hw_params.max_stations = IWL3945_STATION_COUNT; - priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL3945_BROADCAST_ID; - - priv->sta_key_max_num = STA_KEY_MAX_NUM; - - priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR; - priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL; - priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS; - - return 0; -} - -unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl3945_frame *frame, u8 rate) -{ - struct iwl3945_tx_beacon_cmd *tx_beacon_cmd; - unsigned int frame_size; - - tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - tx_beacon_cmd->tx.sta_id = - priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - frame_size = iwl3945_fill_beacon_frame(priv, - tx_beacon_cmd->frame, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - - BUG_ON(frame_size > MAX_MPDU_SIZE); - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - - tx_beacon_cmd->tx.rate = rate; - tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK); - - /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/ - tx_beacon_cmd->tx.supp_rates[0] = - (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; - - tx_beacon_cmd->tx.supp_rates[1] = - (IWL_CCK_BASIC_RATES_MASK & 0xF); - - return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size; -} - -void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv) -{ - priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx; - priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx; -} - -void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv) -{ - INIT_DELAYED_WORK(&priv->_3945.thermal_periodic, - iwl3945_bg_reg_txpower_periodic); -} - -void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv) -{ - cancel_delayed_work(&priv->_3945.thermal_periodic); -} - -/* check contents of special bootstrap uCode SRAM */ -static int iwl3945_verify_bsm(struct iwl_priv *priv) - { - __le32 *image = priv->ucode_boot.v_addr; - u32 len = priv->ucode_boot.len; - u32 reg; - u32 val; - - IWL_DEBUG_INFO(priv, "Begin verify bsm\n"); - - /* verify BSM SRAM contents */ - val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG); - for (reg = BSM_SRAM_LOWER_BOUND; - reg < BSM_SRAM_LOWER_BOUND + len; - reg += sizeof(u32), image++) { - val = iwl_read_prph(priv, reg); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "BSM uCode verification failed at " - "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", - BSM_SRAM_LOWER_BOUND, - reg - BSM_SRAM_LOWER_BOUND, len, - val, le32_to_cpu(*image)); - return -EIO; - } - } - - IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n"); - - return 0; -} - - -/****************************************************************************** - * - * EEPROM related functions - * - ******************************************************************************/ - -/* - * Clear the OWNER_MSK, to establish driver (instead of uCode running on - * embedded controller) as EEPROM reader; each read is a series of pulses - * to/from the EEPROM chip, not a single event, so even reads could conflict - * if they weren't arbitrated by some ownership mechanism. Here, the driver - * simply claims ownership, which should be safe when this function is called - * (i.e. before loading uCode!). - */ -static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv) -{ - _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); - return 0; -} - - -static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv) -{ - return; -} - - /** - * iwl3945_load_bsm - Load bootstrap instructions - * - * BSM operation: - * - * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program - * in special SRAM that does not power down during RFKILL. When powering back - * up after power-saving sleeps (or during initial uCode load), the BSM loads - * the bootstrap program into the on-board processor, and starts it. - * - * The bootstrap program loads (via DMA) instructions and data for a new - * program from host DRAM locations indicated by the host driver in the - * BSM_DRAM_* registers. Once the new program is loaded, it starts - * automatically. - * - * When initializing the NIC, the host driver points the BSM to the - * "initialize" uCode image. This uCode sets up some internal data, then - * notifies host via "initialize alive" that it is complete. - * - * The host then replaces the BSM_DRAM_* pointer values to point to the - * normal runtime uCode instructions and a backup uCode data cache buffer - * (filled initially with starting data values for the on-board processor), - * then triggers the "initialize" uCode to load and launch the runtime uCode, - * which begins normal operation. - * - * When doing a power-save shutdown, runtime uCode saves data SRAM into - * the backup data cache in DRAM before SRAM is powered down. - * - * When powering back up, the BSM loads the bootstrap program. This reloads - * the runtime uCode instructions and the backup data cache into SRAM, - * and re-launches the runtime uCode from where it left off. - */ -static int iwl3945_load_bsm(struct iwl_priv *priv) -{ - __le32 *image = priv->ucode_boot.v_addr; - u32 len = priv->ucode_boot.len; - dma_addr_t pinst; - dma_addr_t pdata; - u32 inst_len; - u32 data_len; - int rc; - int i; - u32 done; - u32 reg_offset; - - IWL_DEBUG_INFO(priv, "Begin load bsm\n"); - - /* make sure bootstrap program is no larger than BSM's SRAM size */ - if (len > IWL39_MAX_BSM_SIZE) - return -EINVAL; - - /* Tell bootstrap uCode where to find the "Initialize" uCode - * in host DRAM ... host DRAM physical address bits 31:0 for 3945. - * NOTE: iwl3945_initialize_alive_start() will replace these values, - * after the "initialize" uCode has run, to point to - * runtime/protocol instructions and backup data cache. */ - pinst = priv->ucode_init.p_addr; - pdata = priv->ucode_init_data.p_addr; - inst_len = priv->ucode_init.len; - data_len = priv->ucode_init_data.len; - - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); - - /* Fill BSM memory with bootstrap instructions */ - for (reg_offset = BSM_SRAM_LOWER_BOUND; - reg_offset < BSM_SRAM_LOWER_BOUND + len; - reg_offset += sizeof(u32), image++) - _iwl_write_prph(priv, reg_offset, - le32_to_cpu(*image)); - - rc = iwl3945_verify_bsm(priv); - if (rc) - return rc; - - /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ - iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); - iwl_write_prph(priv, BSM_WR_MEM_DST_REG, - IWL39_RTC_INST_LOWER_BOUND); - iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); - - /* Load bootstrap code into instruction SRAM now, - * to prepare to load "initialize" uCode */ - iwl_write_prph(priv, BSM_WR_CTRL_REG, - BSM_WR_CTRL_REG_BIT_START); - - /* Wait for load of bootstrap uCode to finish */ - for (i = 0; i < 100; i++) { - done = iwl_read_prph(priv, BSM_WR_CTRL_REG); - if (!(done & BSM_WR_CTRL_REG_BIT_START)) - break; - udelay(10); - } - if (i < 100) - IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i); - else { - IWL_ERR(priv, "BSM write did not complete!\n"); - return -EIO; - } - - /* Enable future boot loads whenever power management unit triggers it - * (e.g. when powering back up after power-save shutdown) */ - iwl_write_prph(priv, BSM_WR_CTRL_REG, - BSM_WR_CTRL_REG_BIT_START_EN); - - return 0; -} - -static struct iwl_hcmd_ops iwl3945_hcmd = { - .rxon_assoc = iwl3945_send_rxon_assoc, - .commit_rxon = iwl3945_commit_rxon, - .send_bt_config = iwl_send_bt_config, -}; - -static struct iwl_lib_ops iwl3945_lib = { - .txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd, - .txq_free_tfd = iwl3945_hw_txq_free_tfd, - .txq_init = iwl3945_hw_tx_queue_init, - .load_ucode = iwl3945_load_bsm, - .dump_nic_event_log = iwl3945_dump_nic_event_log, - .dump_nic_error_log = iwl3945_dump_nic_error_log, - .apm_ops = { - .init = iwl3945_apm_init, - .config = iwl3945_nic_config, - }, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REGULATORY_BAND_1_CHANNELS, - EEPROM_REGULATORY_BAND_2_CHANNELS, - EEPROM_REGULATORY_BAND_3_CHANNELS, - EEPROM_REGULATORY_BAND_4_CHANNELS, - EEPROM_REGULATORY_BAND_5_CHANNELS, - EEPROM_REGULATORY_BAND_NO_HT40, - EEPROM_REGULATORY_BAND_NO_HT40, - }, - .acquire_semaphore = iwl3945_eeprom_acquire_semaphore, - .release_semaphore = iwl3945_eeprom_release_semaphore, - .query_addr = iwlcore_eeprom_query_addr, - }, - .send_tx_power = iwl3945_send_tx_power, - .is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr, - .isr_ops = { - .isr = iwl_isr_legacy, - }, - - .debugfs_ops = { - .rx_stats_read = iwl3945_ucode_rx_stats_read, - .tx_stats_read = iwl3945_ucode_tx_stats_read, - .general_stats_read = iwl3945_ucode_general_stats_read, - }, -}; - -static const struct iwl_legacy_ops iwl3945_legacy_ops = { - .post_associate = iwl3945_post_associate, - .config_ap = iwl3945_config_ap, - .manage_ibss_station = iwl3945_manage_ibss_station, -}; - -static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = { - .get_hcmd_size = iwl3945_get_hcmd_size, - .build_addsta_hcmd = iwl3945_build_addsta_hcmd, - .tx_cmd_protection = iwl_legacy_tx_cmd_protection, - .request_scan = iwl3945_request_scan, - .post_scan = iwl3945_post_scan, -}; - -static const struct iwl_ops iwl3945_ops = { - .lib = &iwl3945_lib, - .hcmd = &iwl3945_hcmd, - .utils = &iwl3945_hcmd_utils, - .led = &iwl3945_led_ops, - .legacy = &iwl3945_legacy_ops, - .ieee80211_ops = &iwl3945_hw_ops, -}; - -static struct iwl_base_params iwl3945_base_params = { - .eeprom_size = IWL3945_EEPROM_IMG_SIZE, - .num_of_queues = IWL39_NUM_QUEUES, - .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, - .set_l0s = false, - .use_bsm = true, - .use_isr_legacy = true, - .led_compensation = 64, - .broken_powersave = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, - .wd_timeout = IWL_DEF_WD_TIMEOUT, - .max_event_log_size = 512, - .tx_power_by_driver = true, -}; - -static struct iwl_cfg iwl3945_bg_cfg = { - .name = "3945BG", - .fw_name_pre = IWL3945_FW_PRE, - .ucode_api_max = IWL3945_UCODE_API_MAX, - .ucode_api_min = IWL3945_UCODE_API_MIN, - .sku = IWL_SKU_G, - .eeprom_ver = EEPROM_3945_EEPROM_VERSION, - .ops = &iwl3945_ops, - .mod_params = &iwl3945_mod_params, - .base_params = &iwl3945_base_params, - .led_mode = IWL_LED_BLINK, -}; - -static struct iwl_cfg iwl3945_abg_cfg = { - .name = "3945ABG", - .fw_name_pre = IWL3945_FW_PRE, - .ucode_api_max = IWL3945_UCODE_API_MAX, - .ucode_api_min = IWL3945_UCODE_API_MIN, - .sku = IWL_SKU_A|IWL_SKU_G, - .eeprom_ver = EEPROM_3945_EEPROM_VERSION, - .ops = &iwl3945_ops, - .mod_params = &iwl3945_mod_params, - .base_params = &iwl3945_base_params, - .led_mode = IWL_LED_BLINK, -}; - -DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = { - {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)}, - {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)}, - {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)}, - {0} -}; - -MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h deleted file mode 100644 index 3eef1eb..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ /dev/null @@ -1,308 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -/* - * Please use this file (iwl-3945.h) for driver implementation definitions. - * Please use iwl-3945-commands.h for uCode API definitions. - * Please use iwl-3945-hw.h for hardware-related definitions. - */ - -#ifndef __iwl_3945_h__ -#define __iwl_3945_h__ - -#include /* for struct pci_device_id */ -#include -#include - -/* Hardware specific file defines the PCI IDs table for that hardware module */ -extern const struct pci_device_id iwl3945_hw_card_ids[]; - -#include "iwl-csr.h" -#include "iwl-prph.h" -#include "iwl-fh.h" -#include "iwl-3945-hw.h" -#include "iwl-debug.h" -#include "iwl-power.h" -#include "iwl-dev.h" -#include "iwl-led.h" - -/* Highest firmware API version supported */ -#define IWL3945_UCODE_API_MAX 2 - -/* Lowest firmware API version supported */ -#define IWL3945_UCODE_API_MIN 1 - -#define IWL3945_FW_PRE "iwlwifi-3945-" -#define _IWL3945_MODULE_FIRMWARE(api) IWL3945_FW_PRE #api ".ucode" -#define IWL3945_MODULE_FIRMWARE(api) _IWL3945_MODULE_FIRMWARE(api) - -/* Default noise level to report when noise measurement is not available. - * This may be because we're: - * 1) Not associated (4965, no beacon statistics being sent to driver) - * 2) Scanning (noise measurement does not apply to associated channel) - * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) - * Use default noise value of -127 ... this is below the range of measurable - * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. - * Also, -127 works better than 0 when averaging frames with/without - * noise info (e.g. averaging might be done in app); measured dBm values are - * always negative ... using a negative value as the default keeps all - * averages within an s8's (used in some apps) range of negative values. */ -#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) - -/* Module parameters accessible from iwl-*.c */ -extern struct iwl_mod_params iwl3945_mod_params; - -struct iwl3945_rate_scale_data { - u64 data; - s32 success_counter; - s32 success_ratio; - s32 counter; - s32 average_tpt; - unsigned long stamp; -}; - -struct iwl3945_rs_sta { - spinlock_t lock; - struct iwl_priv *priv; - s32 *expected_tpt; - unsigned long last_partial_flush; - unsigned long last_flush; - u32 flush_time; - u32 last_tx_packets; - u32 tx_packets; - u8 tgg; - u8 flush_pending; - u8 start_rate; - struct timer_list rate_scale_flush; - struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945]; -#ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *rs_sta_dbgfs_stats_table_file; -#endif - - /* used to be in sta_info */ - int last_txrate_idx; -}; - - -/* - * The common struct MUST be first because it is shared between - * 3945 and agn! - */ -struct iwl3945_sta_priv { - struct iwl_station_priv_common common; - struct iwl3945_rs_sta rs_sta; -}; - -enum iwl3945_antenna { - IWL_ANTENNA_DIVERSITY, - IWL_ANTENNA_MAIN, - IWL_ANTENNA_AUX -}; - -/* - * RTS threshold here is total size [2347] minus 4 FCS bytes - * Per spec: - * a value of 0 means RTS on all data/management packets - * a value > max MSDU size means no RTS - * else RTS for data/management frames where MPDU is larger - * than RTS value. - */ -#define DEFAULT_RTS_THRESHOLD 2347U -#define MIN_RTS_THRESHOLD 0U -#define MAX_RTS_THRESHOLD 2347U -#define MAX_MSDU_SIZE 2304U -#define MAX_MPDU_SIZE 2346U -#define DEFAULT_BEACON_INTERVAL 100U -#define DEFAULT_SHORT_RETRY_LIMIT 7U -#define DEFAULT_LONG_RETRY_LIMIT 4U - -#define IWL_TX_FIFO_AC0 0 -#define IWL_TX_FIFO_AC1 1 -#define IWL_TX_FIFO_AC2 2 -#define IWL_TX_FIFO_AC3 3 -#define IWL_TX_FIFO_HCCA_1 5 -#define IWL_TX_FIFO_HCCA_2 6 -#define IWL_TX_FIFO_NONE 7 - -#define IEEE80211_DATA_LEN 2304 -#define IEEE80211_4ADDR_LEN 30 -#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) -#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) - -struct iwl3945_frame { - union { - struct ieee80211_hdr frame; - struct iwl3945_tx_beacon_cmd beacon; - u8 raw[IEEE80211_FRAME_LEN]; - u8 cmd[360]; - } u; - struct list_head list; -}; - -#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) -#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) -#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) - -#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 -#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 -#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 - -#define IWL_SUPPORTED_RATES_IE_LEN 8 - -#define SCAN_INTERVAL 100 - -#define MAX_TID_COUNT 9 - -#define IWL_INVALID_RATE 0xFF -#define IWL_INVALID_VALUE -1 - -#define STA_PS_STATUS_WAKE 0 -#define STA_PS_STATUS_SLEEP 1 - -struct iwl3945_ibss_seq { - u8 mac[ETH_ALEN]; - u16 seq_num; - u16 frag_num; - unsigned long packet_time; - struct list_head list; -}; - -#define IWL_RX_HDR(x) ((struct iwl3945_rx_frame_hdr *)(\ - x->u.rx_frame.stats.payload + \ - x->u.rx_frame.stats.phy_count)) -#define IWL_RX_END(x) ((struct iwl3945_rx_frame_end *)(\ - IWL_RX_HDR(x)->payload + \ - le16_to_cpu(IWL_RX_HDR(x)->len))) -#define IWL_RX_STATS(x) (&x->u.rx_frame.stats) -#define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload) - - -/****************************************************************************** - * - * Functions implemented in iwl-base.c which are forward declared here - * for use by iwl-*.c - * - *****************************************************************************/ -extern int iwl3945_calc_db_from_ratio(int sig_ratio); -extern void iwl3945_rx_replenish(void *data); -extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); -extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr,int left); -extern int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log, - char **buf, bool display); -extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv); - -/****************************************************************************** - * - * Functions implemented in iwl-[34]*.c which are forward declared here - * for use by iwl-base.c - * - * NOTE: The implementation of these functions are hardware specific - * which is why they are in the hardware specific files (vs. iwl-base.c) - * - * Naming convention -- - * iwl3945_ <-- Its part of iwlwifi (should be changed to iwl3945_) - * iwl3945_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW) - * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) - * iwl3945_bg_ <-- Called from work queue context - * iwl3945_mac_ <-- mac80211 callback - * - ****************************************************************************/ -extern void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv); -extern void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv); -extern void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv); -extern int iwl3945_hw_rxq_stop(struct iwl_priv *priv); -extern int iwl3945_hw_set_hw_params(struct iwl_priv *priv); -extern int iwl3945_hw_nic_init(struct iwl_priv *priv); -extern int iwl3945_hw_nic_stop_master(struct iwl_priv *priv); -extern void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv); -extern void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv); -extern int iwl3945_hw_nic_reset(struct iwl_priv *priv); -extern int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, - struct iwl_tx_queue *txq, - dma_addr_t addr, u16 len, - u8 reset, u8 pad); -extern void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, - struct iwl_tx_queue *txq); -extern int iwl3945_hw_get_temperature(struct iwl_priv *priv); -extern int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, - struct iwl_tx_queue *txq); -extern unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl3945_frame *frame, u8 rate); -void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv, - struct iwl_device_cmd *cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, - int sta_id, int tx_id); -extern int iwl3945_hw_reg_send_txpower(struct iwl_priv *priv); -extern int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power); -extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb); -void iwl3945_reply_statistics(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb); -extern void iwl3945_disable_events(struct iwl_priv *priv); -extern int iwl4965_get_temperature(const struct iwl_priv *priv); -extern void iwl3945_post_associate(struct iwl_priv *priv); -extern void iwl3945_config_ap(struct iwl_priv *priv); - -extern int iwl3945_commit_rxon(struct iwl_priv *priv, - struct iwl_rxon_context *ctx); - -/** - * iwl3945_hw_find_station - Find station id for a given BSSID - * @bssid: MAC address of station ID to find - * - * NOTE: This should not be hardware specific but the code has - * not yet been merged into a single common layer for managing the - * station tables. - */ -extern u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *bssid); - -extern struct ieee80211_ops iwl3945_hw_ops; - -/* - * Forward declare iwl-3945.c functions for iwl-base.c - */ -extern __le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv); -extern int iwl3945_init_hw_rate_table(struct iwl_priv *priv); -extern void iwl3945_reg_txpower_periodic(struct iwl_priv *priv); -extern int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv); - -extern const struct iwl_channel_info *iwl3945_get_channel_info( - const struct iwl_priv *priv, enum ieee80211_band band, u16 channel); - -extern int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate); - -/* scanning */ -int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif); -void iwl3945_post_scan(struct iwl_priv *priv); - -/* rates */ -extern const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945]; - -/* Requires full declaration of iwl_priv before including */ -#include "iwl-io.h" - -#endif diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h deleted file mode 100644 index 9166794..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h +++ /dev/null @@ -1,792 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -/* - * Please use this file (iwl-4965-hw.h) only for hardware-related definitions. - * Use iwl-commands.h for uCode API definitions. - * Use iwl-dev.h for driver implementation definitions. - */ - -#ifndef __iwl_4965_hw_h__ -#define __iwl_4965_hw_h__ - -#include "iwl-fh.h" - -/* EEPROM */ -#define IWL4965_EEPROM_IMG_SIZE 1024 - -/* - * uCode queue management definitions ... - * The first queue used for block-ack aggregation is #7 (4965 only). - * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7. - */ -#define IWL49_FIRST_AMPDU_QUEUE 7 - -/* Sizes and addresses for instruction and data memory (SRAM) in - * 4965's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */ -#define IWL49_RTC_INST_LOWER_BOUND (0x000000) -#define IWL49_RTC_INST_UPPER_BOUND (0x018000) - -#define IWL49_RTC_DATA_LOWER_BOUND (0x800000) -#define IWL49_RTC_DATA_UPPER_BOUND (0x80A000) - -#define IWL49_RTC_INST_SIZE (IWL49_RTC_INST_UPPER_BOUND - \ - IWL49_RTC_INST_LOWER_BOUND) -#define IWL49_RTC_DATA_SIZE (IWL49_RTC_DATA_UPPER_BOUND - \ - IWL49_RTC_DATA_LOWER_BOUND) - -#define IWL49_MAX_INST_SIZE IWL49_RTC_INST_SIZE -#define IWL49_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE - -/* Size of uCode instruction memory in bootstrap state machine */ -#define IWL49_MAX_BSM_SIZE BSM_SRAM_SIZE - -static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr) -{ - return (addr >= IWL49_RTC_DATA_LOWER_BOUND) && - (addr < IWL49_RTC_DATA_UPPER_BOUND); -} - -/********************* START TEMPERATURE *************************************/ - -/** - * 4965 temperature calculation. - * - * The driver must calculate the device temperature before calculating - * a txpower setting (amplifier gain is temperature dependent). The - * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration - * values used for the life of the driver, and one of which (R4) is the - * real-time temperature indicator. - * - * uCode provides all 4 values to the driver via the "initialize alive" - * notification (see struct iwl4965_init_alive_resp). After the runtime uCode - * image loads, uCode updates the R4 value via statistics notifications - * (see STATISTICS_NOTIFICATION), which occur after each received beacon - * when associated, or can be requested via REPLY_STATISTICS_CMD. - * - * NOTE: uCode provides the R4 value as a 23-bit signed value. Driver - * must sign-extend to 32 bits before applying formula below. - * - * Formula: - * - * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8 - * - * NOTE: The basic formula is 259 * (R4-R2) / (R3-R1). The 97/100 is - * an additional correction, which should be centered around 0 degrees - * Celsius (273 degrees Kelvin). The 8 (3 percent of 273) compensates for - * centering the 97/100 correction around 0 degrees K. - * - * Add 273 to Kelvin value to find degrees Celsius, for comparing current - * temperature with factory-measured temperatures when calculating txpower - * settings. - */ -#define TEMPERATURE_CALIB_KELVIN_OFFSET 8 -#define TEMPERATURE_CALIB_A_VAL 259 - -/* Limit range of calculated temperature to be between these Kelvin values */ -#define IWL_TX_POWER_TEMPERATURE_MIN (263) -#define IWL_TX_POWER_TEMPERATURE_MAX (410) - -#define IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \ - (((t) < IWL_TX_POWER_TEMPERATURE_MIN) || \ - ((t) > IWL_TX_POWER_TEMPERATURE_MAX)) - -/********************* END TEMPERATURE ***************************************/ - -/********************* START TXPOWER *****************************************/ - -/** - * 4965 txpower calculations rely on information from three sources: - * - * 1) EEPROM - * 2) "initialize" alive notification - * 3) statistics notifications - * - * EEPROM data consists of: - * - * 1) Regulatory information (max txpower and channel usage flags) is provided - * separately for each channel that can possibly supported by 4965. - * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz - * (legacy) channels. - * - * See struct iwl4965_eeprom_channel for format, and struct iwl4965_eeprom - * for locations in EEPROM. - * - * 2) Factory txpower calibration information is provided separately for - * sub-bands of contiguous channels. 2.4GHz has just one sub-band, - * but 5 GHz has several sub-bands. - * - * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided. - * - * See struct iwl4965_eeprom_calib_info (and the tree of structures - * contained within it) for format, and struct iwl4965_eeprom for - * locations in EEPROM. - * - * "Initialization alive" notification (see struct iwl4965_init_alive_resp) - * consists of: - * - * 1) Temperature calculation parameters. - * - * 2) Power supply voltage measurement. - * - * 3) Tx gain compensation to balance 2 transmitters for MIMO use. - * - * Statistics notifications deliver: - * - * 1) Current values for temperature param R4. - */ - -/** - * To calculate a txpower setting for a given desired target txpower, channel, - * modulation bit rate, and transmitter chain (4965 has 2 transmitters to - * support MIMO and transmit diversity), driver must do the following: - * - * 1) Compare desired txpower vs. (EEPROM) regulatory limit for this channel. - * Do not exceed regulatory limit; reduce target txpower if necessary. - * - * If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31), - * 2 transmitters will be used simultaneously; driver must reduce the - * regulatory limit by 3 dB (half-power) for each transmitter, so the - * combined total output of the 2 transmitters is within regulatory limits. - * - * - * 2) Compare target txpower vs. (EEPROM) saturation txpower *reduced by - * backoff for this bit rate*. Do not exceed (saturation - backoff[rate]); - * reduce target txpower if necessary. - * - * Backoff values below are in 1/2 dB units (equivalent to steps in - * txpower gain tables): - * - * OFDM 6 - 36 MBit: 10 steps (5 dB) - * OFDM 48 MBit: 15 steps (7.5 dB) - * OFDM 54 MBit: 17 steps (8.5 dB) - * OFDM 60 MBit: 20 steps (10 dB) - * CCK all rates: 10 steps (5 dB) - * - * Backoff values apply to saturation txpower on a per-transmitter basis; - * when using MIMO (2 transmitters), each transmitter uses the same - * saturation level provided in EEPROM, and the same backoff values; - * no reduction (such as with regulatory txpower limits) is required. - * - * Saturation and Backoff values apply equally to 20 Mhz (legacy) channel - * widths and 40 Mhz (.11n HT40) channel widths; there is no separate - * factory measurement for ht40 channels. - * - * The result of this step is the final target txpower. The rest of - * the steps figure out the proper settings for the device to achieve - * that target txpower. - * - * - * 3) Determine (EEPROM) calibration sub band for the target channel, by - * comparing against first and last channels in each sub band - * (see struct iwl4965_eeprom_calib_subband_info). - * - * - * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, - * referencing the 2 factory-measured (sample) channels within the sub band. - * - * Interpolation is based on difference between target channel's frequency - * and the sample channels' frequencies. Since channel numbers are based - * on frequency (5 MHz between each channel number), this is equivalent - * to interpolating based on channel number differences. - * - * Note that the sample channels may or may not be the channels at the - * edges of the sub band. The target channel may be "outside" of the - * span of the sampled channels. - * - * Driver may choose the pair (for 2 Tx chains) of measurements (see - * struct iwl4965_eeprom_calib_ch_info) for which the actual measured - * txpower comes closest to the desired txpower. Usually, though, - * the middle set of measurements is closest to the regulatory limits, - * and is therefore a good choice for all txpower calculations (this - * assumes that high accuracy is needed for maximizing legal txpower, - * while lower txpower configurations do not need as much accuracy). - * - * Driver should interpolate both members of the chosen measurement pair, - * i.e. for both Tx chains (radio transmitters), unless the driver knows - * that only one of the chains will be used (e.g. only one tx antenna - * connected, but this should be unusual). The rate scaling algorithm - * switches antennas to find best performance, so both Tx chains will - * be used (although only one at a time) even for non-MIMO transmissions. - * - * Driver should interpolate factory values for temperature, gain table - * index, and actual power. The power amplifier detector values are - * not used by the driver. - * - * Sanity check: If the target channel happens to be one of the sample - * channels, the results should agree with the sample channel's - * measurements! - * - * - * 5) Find difference between desired txpower and (interpolated) - * factory-measured txpower. Using (interpolated) factory gain table index - * (shown elsewhere) as a starting point, adjust this index lower to - * increase txpower, or higher to decrease txpower, until the target - * txpower is reached. Each step in the gain table is 1/2 dB. - * - * For example, if factory measured txpower is 16 dBm, and target txpower - * is 13 dBm, add 6 steps to the factory gain index to reduce txpower - * by 3 dB. - * - * - * 6) Find difference between current device temperature and (interpolated) - * factory-measured temperature for sub-band. Factory values are in - * degrees Celsius. To calculate current temperature, see comments for - * "4965 temperature calculation". - * - * If current temperature is higher than factory temperature, driver must - * increase gain (lower gain table index), and vice verse. - * - * Temperature affects gain differently for different channels: - * - * 2.4 GHz all channels: 3.5 degrees per half-dB step - * 5 GHz channels 34-43: 4.5 degrees per half-dB step - * 5 GHz channels >= 44: 4.0 degrees per half-dB step - * - * NOTE: Temperature can increase rapidly when transmitting, especially - * with heavy traffic at high txpowers. Driver should update - * temperature calculations often under these conditions to - * maintain strong txpower in the face of rising temperature. - * - * - * 7) Find difference between current power supply voltage indicator - * (from "initialize alive") and factory-measured power supply voltage - * indicator (EEPROM). - * - * If the current voltage is higher (indicator is lower) than factory - * voltage, gain should be reduced (gain table index increased) by: - * - * (eeprom - current) / 7 - * - * If the current voltage is lower (indicator is higher) than factory - * voltage, gain should be increased (gain table index decreased) by: - * - * 2 * (current - eeprom) / 7 - * - * If number of index steps in either direction turns out to be > 2, - * something is wrong ... just use 0. - * - * NOTE: Voltage compensation is independent of band/channel. - * - * NOTE: "Initialize" uCode measures current voltage, which is assumed - * to be constant after this initial measurement. Voltage - * compensation for txpower (number of steps in gain table) - * may be calculated once and used until the next uCode bootload. - * - * - * 8) If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31), - * adjust txpower for each transmitter chain, so txpower is balanced - * between the two chains. There are 5 pairs of tx_atten[group][chain] - * values in "initialize alive", one pair for each of 5 channel ranges: - * - * Group 0: 5 GHz channel 34-43 - * Group 1: 5 GHz channel 44-70 - * Group 2: 5 GHz channel 71-124 - * Group 3: 5 GHz channel 125-200 - * Group 4: 2.4 GHz all channels - * - * Add the tx_atten[group][chain] value to the index for the target chain. - * The values are signed, but are in pairs of 0 and a non-negative number, - * so as to reduce gain (if necessary) of the "hotter" channel. This - * avoids any need to double-check for regulatory compliance after - * this step. - * - * - * 9) If setting up for a CCK rate, lower the gain by adding a CCK compensation - * value to the index: - * - * Hardware rev B: 9 steps (4.5 dB) - * Hardware rev C: 5 steps (2.5 dB) - * - * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, - * bits [3:2], 1 = B, 2 = C. - * - * NOTE: This compensation is in addition to any saturation backoff that - * might have been applied in an earlier step. - * - * - * 10) Select the gain table, based on band (2.4 vs 5 GHz). - * - * Limit the adjusted index to stay within the table! - * - * - * 11) Read gain table entries for DSP and radio gain, place into appropriate - * location(s) in command (struct iwl4965_txpowertable_cmd). - */ - -/** - * When MIMO is used (2 transmitters operating simultaneously), driver should - * limit each transmitter to deliver a max of 3 dB below the regulatory limit - * for the device. That is, use half power for each transmitter, so total - * txpower is within regulatory limits. - * - * The value "6" represents number of steps in gain table to reduce power 3 dB. - * Each step is 1/2 dB. - */ -#define IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6) - -/** - * CCK gain compensation. - * - * When calculating txpowers for CCK, after making sure that the target power - * is within regulatory and saturation limits, driver must additionally - * back off gain by adding these values to the gain table index. - * - * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, - * bits [3:2], 1 = B, 2 = C. - */ -#define IWL_TX_POWER_CCK_COMPENSATION_B_STEP (9) -#define IWL_TX_POWER_CCK_COMPENSATION_C_STEP (5) - -/* - * 4965 power supply voltage compensation for txpower - */ -#define TX_POWER_IWL_VOLTAGE_CODES_PER_03V (7) - -/** - * Gain tables. - * - * The following tables contain pair of values for setting txpower, i.e. - * gain settings for the output of the device's digital signal processor (DSP), - * and for the analog gain structure of the transmitter. - * - * Each entry in the gain tables represents a step of 1/2 dB. Note that these - * are *relative* steps, not indications of absolute output power. Output - * power varies with temperature, voltage, and channel frequency, and also - * requires consideration of average power (to satisfy regulatory constraints), - * and peak power (to avoid distortion of the output signal). - * - * Each entry contains two values: - * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained - * linear value that multiplies the output of the digital signal processor, - * before being sent to the analog radio. - * 2) Radio gain. This sets the analog gain of the radio Tx path. - * It is a coarser setting, and behaves in a logarithmic (dB) fashion. - * - * EEPROM contains factory calibration data for txpower. This maps actual - * measured txpower levels to gain settings in the "well known" tables - * below ("well-known" means here that both factory calibration *and* the - * driver work with the same table). - * - * There are separate tables for 2.4 GHz and 5 GHz bands. The 5 GHz table - * has an extension (into negative indexes), in case the driver needs to - * boost power setting for high device temperatures (higher than would be - * present during factory calibration). A 5 Ghz EEPROM index of "40" - * corresponds to the 49th entry in the table used by the driver. - */ -#define MIN_TX_GAIN_INDEX (0) /* highest gain, lowest idx, 2.4 */ -#define MIN_TX_GAIN_INDEX_52GHZ_EXT (-9) /* highest gain, lowest idx, 5 */ - -/** - * 2.4 GHz gain table - * - * Index Dsp gain Radio gain - * 0 110 0x3f (highest gain) - * 1 104 0x3f - * 2 98 0x3f - * 3 110 0x3e - * 4 104 0x3e - * 5 98 0x3e - * 6 110 0x3d - * 7 104 0x3d - * 8 98 0x3d - * 9 110 0x3c - * 10 104 0x3c - * 11 98 0x3c - * 12 110 0x3b - * 13 104 0x3b - * 14 98 0x3b - * 15 110 0x3a - * 16 104 0x3a - * 17 98 0x3a - * 18 110 0x39 - * 19 104 0x39 - * 20 98 0x39 - * 21 110 0x38 - * 22 104 0x38 - * 23 98 0x38 - * 24 110 0x37 - * 25 104 0x37 - * 26 98 0x37 - * 27 110 0x36 - * 28 104 0x36 - * 29 98 0x36 - * 30 110 0x35 - * 31 104 0x35 - * 32 98 0x35 - * 33 110 0x34 - * 34 104 0x34 - * 35 98 0x34 - * 36 110 0x33 - * 37 104 0x33 - * 38 98 0x33 - * 39 110 0x32 - * 40 104 0x32 - * 41 98 0x32 - * 42 110 0x31 - * 43 104 0x31 - * 44 98 0x31 - * 45 110 0x30 - * 46 104 0x30 - * 47 98 0x30 - * 48 110 0x6 - * 49 104 0x6 - * 50 98 0x6 - * 51 110 0x5 - * 52 104 0x5 - * 53 98 0x5 - * 54 110 0x4 - * 55 104 0x4 - * 56 98 0x4 - * 57 110 0x3 - * 58 104 0x3 - * 59 98 0x3 - * 60 110 0x2 - * 61 104 0x2 - * 62 98 0x2 - * 63 110 0x1 - * 64 104 0x1 - * 65 98 0x1 - * 66 110 0x0 - * 67 104 0x0 - * 68 98 0x0 - * 69 97 0 - * 70 96 0 - * 71 95 0 - * 72 94 0 - * 73 93 0 - * 74 92 0 - * 75 91 0 - * 76 90 0 - * 77 89 0 - * 78 88 0 - * 79 87 0 - * 80 86 0 - * 81 85 0 - * 82 84 0 - * 83 83 0 - * 84 82 0 - * 85 81 0 - * 86 80 0 - * 87 79 0 - * 88 78 0 - * 89 77 0 - * 90 76 0 - * 91 75 0 - * 92 74 0 - * 93 73 0 - * 94 72 0 - * 95 71 0 - * 96 70 0 - * 97 69 0 - * 98 68 0 - */ - -/** - * 5 GHz gain table - * - * Index Dsp gain Radio gain - * -9 123 0x3F (highest gain) - * -8 117 0x3F - * -7 110 0x3F - * -6 104 0x3F - * -5 98 0x3F - * -4 110 0x3E - * -3 104 0x3E - * -2 98 0x3E - * -1 110 0x3D - * 0 104 0x3D - * 1 98 0x3D - * 2 110 0x3C - * 3 104 0x3C - * 4 98 0x3C - * 5 110 0x3B - * 6 104 0x3B - * 7 98 0x3B - * 8 110 0x3A - * 9 104 0x3A - * 10 98 0x3A - * 11 110 0x39 - * 12 104 0x39 - * 13 98 0x39 - * 14 110 0x38 - * 15 104 0x38 - * 16 98 0x38 - * 17 110 0x37 - * 18 104 0x37 - * 19 98 0x37 - * 20 110 0x36 - * 21 104 0x36 - * 22 98 0x36 - * 23 110 0x35 - * 24 104 0x35 - * 25 98 0x35 - * 26 110 0x34 - * 27 104 0x34 - * 28 98 0x34 - * 29 110 0x33 - * 30 104 0x33 - * 31 98 0x33 - * 32 110 0x32 - * 33 104 0x32 - * 34 98 0x32 - * 35 110 0x31 - * 36 104 0x31 - * 37 98 0x31 - * 38 110 0x30 - * 39 104 0x30 - * 40 98 0x30 - * 41 110 0x25 - * 42 104 0x25 - * 43 98 0x25 - * 44 110 0x24 - * 45 104 0x24 - * 46 98 0x24 - * 47 110 0x23 - * 48 104 0x23 - * 49 98 0x23 - * 50 110 0x22 - * 51 104 0x18 - * 52 98 0x18 - * 53 110 0x17 - * 54 104 0x17 - * 55 98 0x17 - * 56 110 0x16 - * 57 104 0x16 - * 58 98 0x16 - * 59 110 0x15 - * 60 104 0x15 - * 61 98 0x15 - * 62 110 0x14 - * 63 104 0x14 - * 64 98 0x14 - * 65 110 0x13 - * 66 104 0x13 - * 67 98 0x13 - * 68 110 0x12 - * 69 104 0x08 - * 70 98 0x08 - * 71 110 0x07 - * 72 104 0x07 - * 73 98 0x07 - * 74 110 0x06 - * 75 104 0x06 - * 76 98 0x06 - * 77 110 0x05 - * 78 104 0x05 - * 79 98 0x05 - * 80 110 0x04 - * 81 104 0x04 - * 82 98 0x04 - * 83 110 0x03 - * 84 104 0x03 - * 85 98 0x03 - * 86 110 0x02 - * 87 104 0x02 - * 88 98 0x02 - * 89 110 0x01 - * 90 104 0x01 - * 91 98 0x01 - * 92 110 0x00 - * 93 104 0x00 - * 94 98 0x00 - * 95 93 0x00 - * 96 88 0x00 - * 97 83 0x00 - * 98 78 0x00 - */ - - -/** - * Sanity checks and default values for EEPROM regulatory levels. - * If EEPROM values fall outside MIN/MAX range, use default values. - * - * Regulatory limits refer to the maximum average txpower allowed by - * regulatory agencies in the geographies in which the device is meant - * to be operated. These limits are SKU-specific (i.e. geography-specific), - * and channel-specific; each channel has an individual regulatory limit - * listed in the EEPROM. - * - * Units are in half-dBm (i.e. "34" means 17 dBm). - */ -#define IWL_TX_POWER_DEFAULT_REGULATORY_24 (34) -#define IWL_TX_POWER_DEFAULT_REGULATORY_52 (34) -#define IWL_TX_POWER_REGULATORY_MIN (0) -#define IWL_TX_POWER_REGULATORY_MAX (34) - -/** - * Sanity checks and default values for EEPROM saturation levels. - * If EEPROM values fall outside MIN/MAX range, use default values. - * - * Saturation is the highest level that the output power amplifier can produce - * without significant clipping distortion. This is a "peak" power level. - * Different types of modulation (i.e. various "rates", and OFDM vs. CCK) - * require differing amounts of backoff, relative to their average power output, - * in order to avoid clipping distortion. - * - * Driver must make sure that it is violating neither the saturation limit, - * nor the regulatory limit, when calculating Tx power settings for various - * rates. - * - * Units are in half-dBm (i.e. "38" means 19 dBm). - */ -#define IWL_TX_POWER_DEFAULT_SATURATION_24 (38) -#define IWL_TX_POWER_DEFAULT_SATURATION_52 (38) -#define IWL_TX_POWER_SATURATION_MIN (20) -#define IWL_TX_POWER_SATURATION_MAX (50) - -/** - * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance) - * and thermal Txpower calibration. - * - * When calculating txpower, driver must compensate for current device - * temperature; higher temperature requires higher gain. Driver must calculate - * current temperature (see "4965 temperature calculation"), then compare vs. - * factory calibration temperature in EEPROM; if current temperature is higher - * than factory temperature, driver must *increase* gain by proportions shown - * in table below. If current temperature is lower than factory, driver must - * *decrease* gain. - * - * Different frequency ranges require different compensation, as shown below. - */ -/* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR1_FCH 34 -#define CALIB_IWL_TX_ATTEN_GR1_LCH 43 - -/* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR2_FCH 44 -#define CALIB_IWL_TX_ATTEN_GR2_LCH 70 - -/* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR3_FCH 71 -#define CALIB_IWL_TX_ATTEN_GR3_LCH 124 - -/* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR4_FCH 125 -#define CALIB_IWL_TX_ATTEN_GR4_LCH 200 - -/* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */ -#define CALIB_IWL_TX_ATTEN_GR5_FCH 1 -#define CALIB_IWL_TX_ATTEN_GR5_LCH 20 - -enum { - CALIB_CH_GROUP_1 = 0, - CALIB_CH_GROUP_2 = 1, - CALIB_CH_GROUP_3 = 2, - CALIB_CH_GROUP_4 = 3, - CALIB_CH_GROUP_5 = 4, - CALIB_CH_GROUP_MAX -}; - -/********************* END TXPOWER *****************************************/ - - -/** - * Tx/Rx Queues - * - * Most communication between driver and 4965 is via queues of data buffers. - * For example, all commands that the driver issues to device's embedded - * controller (uCode) are via the command queue (one of the Tx queues). All - * uCode command responses/replies/notifications, including Rx frames, are - * conveyed from uCode to driver via the Rx queue. - * - * Most support for these queues, including handshake support, resides in - * structures in host DRAM, shared between the driver and the device. When - * allocating this memory, the driver must make sure that data written by - * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's - * cache memory), so DRAM and cache are consistent, and the device can - * immediately see changes made by the driver. - * - * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via - * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array - * in DRAM containing 256 Transmit Frame Descriptors (TFDs). - */ -#define IWL49_NUM_FIFOS 7 -#define IWL49_CMD_FIFO_NUM 4 -#define IWL49_NUM_QUEUES 16 -#define IWL49_NUM_AMPDU_QUEUES 8 - - -/** - * struct iwl4965_schedq_bc_tbl - * - * Byte Count table - * - * Each Tx queue uses a byte-count table containing 320 entries: - * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that - * duplicate the first 64 entries (to avoid wrap-around within a Tx window; - * max Tx window is 64 TFDs). - * - * When driver sets up a new TFD, it must also enter the total byte count - * of the frame to be transmitted into the corresponding entry in the byte - * count table for the chosen Tx queue. If the TFD index is 0-63, the driver - * must duplicate the byte count entry in corresponding index 256-319. - * - * padding puts each byte count table on a 1024-byte boundary; - * 4965 assumes tables are separated by 1024 bytes. - */ -struct iwl4965_scd_bc_tbl { - __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; - u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)]; -} __packed; - -#endif /* !__iwl_4965_hw_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c deleted file mode 100644 index 8998ed1..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ /dev/null @@ -1,2666 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-helpers.h" -#include "iwl-agn-calib.h" -#include "iwl-sta.h" -#include "iwl-agn-led.h" -#include "iwl-agn.h" -#include "iwl-agn-debugfs.h" -#include "iwl-legacy.h" - -static int iwl4965_send_tx_power(struct iwl_priv *priv); -static int iwl4965_hw_get_temperature(struct iwl_priv *priv); - -/* Highest firmware API version supported */ -#define IWL4965_UCODE_API_MAX 2 - -/* Lowest firmware API version supported */ -#define IWL4965_UCODE_API_MIN 2 - -#define IWL4965_FW_PRE "iwlwifi-4965-" -#define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode" -#define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api) - -/* check contents of special bootstrap uCode SRAM */ -static int iwl4965_verify_bsm(struct iwl_priv *priv) -{ - __le32 *image = priv->ucode_boot.v_addr; - u32 len = priv->ucode_boot.len; - u32 reg; - u32 val; - - IWL_DEBUG_INFO(priv, "Begin verify bsm\n"); - - /* verify BSM SRAM contents */ - val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG); - for (reg = BSM_SRAM_LOWER_BOUND; - reg < BSM_SRAM_LOWER_BOUND + len; - reg += sizeof(u32), image++) { - val = iwl_read_prph(priv, reg); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "BSM uCode verification failed at " - "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", - BSM_SRAM_LOWER_BOUND, - reg - BSM_SRAM_LOWER_BOUND, len, - val, le32_to_cpu(*image)); - return -EIO; - } - } - - IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n"); - - return 0; -} - -/** - * iwl4965_load_bsm - Load bootstrap instructions - * - * BSM operation: - * - * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program - * in special SRAM that does not power down during RFKILL. When powering back - * up after power-saving sleeps (or during initial uCode load), the BSM loads - * the bootstrap program into the on-board processor, and starts it. - * - * The bootstrap program loads (via DMA) instructions and data for a new - * program from host DRAM locations indicated by the host driver in the - * BSM_DRAM_* registers. Once the new program is loaded, it starts - * automatically. - * - * When initializing the NIC, the host driver points the BSM to the - * "initialize" uCode image. This uCode sets up some internal data, then - * notifies host via "initialize alive" that it is complete. - * - * The host then replaces the BSM_DRAM_* pointer values to point to the - * normal runtime uCode instructions and a backup uCode data cache buffer - * (filled initially with starting data values for the on-board processor), - * then triggers the "initialize" uCode to load and launch the runtime uCode, - * which begins normal operation. - * - * When doing a power-save shutdown, runtime uCode saves data SRAM into - * the backup data cache in DRAM before SRAM is powered down. - * - * When powering back up, the BSM loads the bootstrap program. This reloads - * the runtime uCode instructions and the backup data cache into SRAM, - * and re-launches the runtime uCode from where it left off. - */ -static int iwl4965_load_bsm(struct iwl_priv *priv) -{ - __le32 *image = priv->ucode_boot.v_addr; - u32 len = priv->ucode_boot.len; - dma_addr_t pinst; - dma_addr_t pdata; - u32 inst_len; - u32 data_len; - int i; - u32 done; - u32 reg_offset; - int ret; - - IWL_DEBUG_INFO(priv, "Begin load bsm\n"); - - priv->ucode_type = UCODE_RT; - - /* make sure bootstrap program is no larger than BSM's SRAM size */ - if (len > IWL49_MAX_BSM_SIZE) - return -EINVAL; - - /* Tell bootstrap uCode where to find the "Initialize" uCode - * in host DRAM ... host DRAM physical address bits 35:4 for 4965. - * NOTE: iwl_init_alive_start() will replace these values, - * after the "initialize" uCode has run, to point to - * runtime/protocol instructions and backup data cache. - */ - pinst = priv->ucode_init.p_addr >> 4; - pdata = priv->ucode_init_data.p_addr >> 4; - inst_len = priv->ucode_init.len; - data_len = priv->ucode_init_data.len; - - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); - - /* Fill BSM memory with bootstrap instructions */ - for (reg_offset = BSM_SRAM_LOWER_BOUND; - reg_offset < BSM_SRAM_LOWER_BOUND + len; - reg_offset += sizeof(u32), image++) - _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image)); - - ret = iwl4965_verify_bsm(priv); - if (ret) - return ret; - - /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ - iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); - iwl_write_prph(priv, BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND); - iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); - - /* Load bootstrap code into instruction SRAM now, - * to prepare to load "initialize" uCode */ - iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); - - /* Wait for load of bootstrap uCode to finish */ - for (i = 0; i < 100; i++) { - done = iwl_read_prph(priv, BSM_WR_CTRL_REG); - if (!(done & BSM_WR_CTRL_REG_BIT_START)) - break; - udelay(10); - } - if (i < 100) - IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i); - else { - IWL_ERR(priv, "BSM write did not complete!\n"); - return -EIO; - } - - /* Enable future boot loads whenever power management unit triggers it - * (e.g. when powering back up after power-save shutdown) */ - iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); - - - return 0; -} - -/** - * iwl4965_set_ucode_ptrs - Set uCode address location - * - * Tell initialization uCode where to find runtime uCode. - * - * BSM registers initially contain pointers to initialization uCode. - * We need to replace them to load runtime uCode inst and data, - * and to save runtime data when powering down. - */ -static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) -{ - dma_addr_t pinst; - dma_addr_t pdata; - int ret = 0; - - /* bits 35:4 for 4965 */ - pinst = priv->ucode_code.p_addr >> 4; - pdata = priv->ucode_data_backup.p_addr >> 4; - - /* Tell bootstrap uCode where to find image to load */ - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, - priv->ucode_data.len); - - /* Inst byte count must be last to set up, bit 31 signals uCode - * that all new ptr/size info is in place */ - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, - priv->ucode_code.len | BSM_DRAM_INST_LOAD); - IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n"); - - return ret; -} - -/** - * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received - * - * Called after REPLY_ALIVE notification received from "initialize" uCode. - * - * The 4965 "initialize" ALIVE reply contains calibration data for: - * Voltage, temperature, and MIMO tx gain correction, now stored in priv - * (3945 does not contain this data). - * - * Tell "initialize" uCode to go ahead and load the runtime uCode. -*/ -static void iwl4965_init_alive_start(struct iwl_priv *priv) -{ - /* Bootstrap uCode has loaded initialize uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "initialize" alive if code weren't properly loaded. */ - if (iwl_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n"); - goto restart; - } - - /* Calculate temperature */ - priv->temperature = iwl4965_hw_get_temperature(priv); - - /* Send pointers to protocol/runtime uCode image ... init code will - * load and launch runtime uCode, which will send us another "Alive" - * notification. */ - IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); - if (iwl4965_set_ucode_ptrs(priv)) { - /* Runtime instruction load won't happen; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n"); - goto restart; - } - return; - -restart: - queue_work(priv->workqueue, &priv->restart); -} - -static bool is_ht40_channel(__le32 rxon_flags) -{ - int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK) - >> RXON_FLG_CHANNEL_MODE_POS; - return ((chan_mod == CHANNEL_MODE_PURE_40) || - (chan_mod == CHANNEL_MODE_MIXED)); -} - -/* - * EEPROM handlers - */ -static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv) -{ - return iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET); -} - -/* - * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask - * must be called under priv->lock and mac access - */ -static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask) -{ - iwl_write_prph(priv, IWL49_SCD_TXFACT, mask); -} - -static void iwl4965_nic_config(struct iwl_priv *priv) -{ - unsigned long flags; - u16 radio_cfg; - - spin_lock_irqsave(&priv->lock, flags); - - radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); - - /* write radio config values to register */ - if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX) - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | - EEPROM_RF_CFG_STEP_MSK(radio_cfg) | - EEPROM_RF_CFG_DASH_MSK(radio_cfg)); - - /* set CSR_HW_CONFIG_REG for uCode use */ - iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | - CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); - - priv->calib_info = (struct iwl_eeprom_calib_info *) - iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET); - - spin_unlock_irqrestore(&priv->lock, flags); -} - -/* Reset differential Rx gains in NIC to prepare for chain noise calibration. - * Called after every association, but this runs only once! - * ... once chain noise is calibrated the first time, it's good forever. */ -static void iwl4965_chain_noise_reset(struct iwl_priv *priv) -{ - struct iwl_chain_noise_data *data = &(priv->chain_noise_data); - - if ((data->state == IWL_CHAIN_NOISE_ALIVE) && - iwl_is_any_associated(priv)) { - struct iwl_calib_diff_gain_cmd cmd; - - /* clear data for chain noise calibration algorithm */ - data->chain_noise_a = 0; - data->chain_noise_b = 0; - data->chain_noise_c = 0; - data->chain_signal_a = 0; - data->chain_signal_b = 0; - data->chain_signal_c = 0; - data->beacon_count = 0; - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD; - cmd.diff_gain_a = 0; - cmd.diff_gain_b = 0; - cmd.diff_gain_c = 0; - if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, - sizeof(cmd), &cmd)) - IWL_ERR(priv, - "Could not send REPLY_PHY_CALIBRATION_CMD\n"); - data->state = IWL_CHAIN_NOISE_ACCUMULATE; - IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n"); - } -} - -static void iwl4965_gain_computation(struct iwl_priv *priv, - u32 *average_noise, - u16 min_average_noise_antenna_i, - u32 min_average_noise, - u8 default_chain) -{ - int i, ret; - struct iwl_chain_noise_data *data = &priv->chain_noise_data; - - data->delta_gain_code[min_average_noise_antenna_i] = 0; - - for (i = default_chain; i < NUM_RX_CHAINS; i++) { - s32 delta_g = 0; - - if (!(data->disconn_array[i]) && - (data->delta_gain_code[i] == - CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) { - delta_g = average_noise[i] - min_average_noise; - data->delta_gain_code[i] = (u8)((delta_g * 10) / 15); - data->delta_gain_code[i] = - min(data->delta_gain_code[i], - (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); - - data->delta_gain_code[i] = - (data->delta_gain_code[i] | (1 << 2)); - } else { - data->delta_gain_code[i] = 0; - } - } - IWL_DEBUG_CALIB(priv, "delta_gain_codes: a %d b %d c %d\n", - data->delta_gain_code[0], - data->delta_gain_code[1], - data->delta_gain_code[2]); - - /* Differential gain gets sent to uCode only once */ - if (!data->radio_write) { - struct iwl_calib_diff_gain_cmd cmd; - data->radio_write = 1; - - memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD; - cmd.diff_gain_a = data->delta_gain_code[0]; - cmd.diff_gain_b = data->delta_gain_code[1]; - cmd.diff_gain_c = data->delta_gain_code[2]; - ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, - sizeof(cmd), &cmd); - if (ret) - IWL_DEBUG_CALIB(priv, "fail sending cmd " - "REPLY_PHY_CALIBRATION_CMD\n"); - - /* TODO we might want recalculate - * rx_chain in rxon cmd */ - - /* Mark so we run this algo only once! */ - data->state = IWL_CHAIN_NOISE_CALIBRATED; - } -} - -static void iwl4965_bg_txpower_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - txpower_work); - - /* If a scan happened to start before we got here - * then just return; the statistics notification will - * kick off another scheduled work to compensate for - * any temperature delta we missed here. */ - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - - /* Regardless of if we are associated, we must reconfigure the - * TX power since frames can be sent on non-radar channels while - * not associated */ - iwl4965_send_tx_power(priv); - - /* Update last_temperature to keep is_calib_needed from running - * when it isn't needed... */ - priv->last_temperature = priv->temperature; - - mutex_unlock(&priv->mutex); -} - -/* - * Acquire priv->lock before calling this function ! - */ -static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index) -{ - iwl_write_direct32(priv, HBUS_TARG_WRPTR, - (index & 0xff) | (txq_id << 8)); - iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index); -} - -/** - * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue - * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed - * @scd_retry: (1) Indicates queue will be used in aggregation mode - * - * NOTE: Acquire priv->lock before calling this function ! - */ -static void iwl4965_tx_queue_set_status(struct iwl_priv *priv, - struct iwl_tx_queue *txq, - int tx_fifo_id, int scd_retry) -{ - int txq_id = txq->q.id; - - /* Find out whether to activate Tx queue */ - int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0; - - /* Set up and activate */ - iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | - (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) | - (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) | - (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | - IWL49_SCD_QUEUE_STTS_REG_MSK); - - txq->sched_retry = scd_retry; - - IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n", - active ? "Activate" : "Deactivate", - scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); -} - -static const s8 default_queue_to_tx_fifo[] = { - IWL_TX_FIFO_VO, - IWL_TX_FIFO_VI, - IWL_TX_FIFO_BE, - IWL_TX_FIFO_BK, - IWL49_CMD_FIFO_NUM, - IWL_TX_FIFO_UNUSED, - IWL_TX_FIFO_UNUSED, -}; - -static int iwl4965_alive_notify(struct iwl_priv *priv) -{ - u32 a; - unsigned long flags; - int i, chan; - u32 reg_val; - - spin_lock_irqsave(&priv->lock, flags); - - /* Clear 4965's internal Tx Scheduler data base */ - priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR); - a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET; - for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) - iwl_write_targ_mem(priv, a, 0); - for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) - iwl_write_targ_mem(priv, a, 0); - for (; a < priv->scd_base_addr + - IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4) - iwl_write_targ_mem(priv, a, 0); - - /* Tel 4965 where to find Tx byte count tables */ - iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR, - priv->scd_bc_tbls.dma >> 10); - - /* Enable DMA channel */ - for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++) - iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan), - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); - - /* Update FH chicken bits */ - reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG); - iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG, - reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); - - /* Disable chain mode for all queues */ - iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0); - - /* Initialize each Tx queue (including the command queue) */ - for (i = 0; i < priv->hw_params.max_txq_num; i++) { - - /* TFD circular buffer read/write indexes */ - iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0); - iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8)); - - /* Max Tx Window size for Scheduler-ACK mode */ - iwl_write_targ_mem(priv, priv->scd_base_addr + - IWL49_SCD_CONTEXT_QUEUE_OFFSET(i), - (SCD_WIN_SIZE << - IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); - - /* Frame limit */ - iwl_write_targ_mem(priv, priv->scd_base_addr + - IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) + - sizeof(u32), - (SCD_FRAME_LIMIT << - IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); - - } - iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK, - (1 << priv->hw_params.max_txq_num) - 1); - - /* Activate all Tx DMA/FIFO channels */ - priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 6)); - - iwl4965_set_wr_ptrs(priv, IWL_DEFAULT_CMD_QUEUE_NUM, 0); - - /* make sure all queue are not stopped */ - memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped)); - for (i = 0; i < 4; i++) - atomic_set(&priv->queue_stop_count[i], 0); - - /* reset to 0 to enable all the queue first */ - priv->txq_ctx_active_msk = 0; - /* Map each Tx/cmd queue to its corresponding fifo */ - BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); - - for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { - int ac = default_queue_to_tx_fifo[i]; - - iwl_txq_ctx_activate(priv, i); - - if (ac == IWL_TX_FIFO_UNUSED) - continue; - - iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0); - } - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static struct iwl_sensitivity_ranges iwl4965_sensitivity = { - .min_nrg_cck = 97, - .max_nrg_cck = 0, /* not used, set to 0 */ - - .auto_corr_min_ofdm = 85, - .auto_corr_min_ofdm_mrc = 170, - .auto_corr_min_ofdm_x1 = 105, - .auto_corr_min_ofdm_mrc_x1 = 220, - - .auto_corr_max_ofdm = 120, - .auto_corr_max_ofdm_mrc = 210, - .auto_corr_max_ofdm_x1 = 140, - .auto_corr_max_ofdm_mrc_x1 = 270, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 200, - .auto_corr_min_cck_mrc = 200, - .auto_corr_max_cck_mrc = 400, - - .nrg_th_cck = 100, - .nrg_th_ofdm = 100, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 390, - .nrg_th_cca = 62, -}; - -static void iwl4965_set_ct_threshold(struct iwl_priv *priv) -{ - /* want Kelvin */ - priv->hw_params.ct_kill_threshold = - CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); -} - -/** - * iwl4965_hw_set_hw_params - * - * Called when initializing driver - */ -static int iwl4965_hw_set_hw_params(struct iwl_priv *priv) -{ - if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && - priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES) - priv->cfg->base_params->num_of_queues = - priv->cfg->mod_params->num_of_queues; - - priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues; - priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; - priv->hw_params.scd_bc_tbls_size = - priv->cfg->base_params->num_of_queues * - sizeof(struct iwl4965_scd_bc_tbl); - priv->hw_params.tfd_size = sizeof(struct iwl_tfd); - priv->hw_params.max_stations = IWL4965_STATION_COUNT; - priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL4965_BROADCAST_ID; - priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE; - priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE; - priv->hw_params.max_bsm_size = BSM_SRAM_SIZE; - priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ); - - priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; - - priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); - priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); - priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; - priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; - - iwl4965_set_ct_threshold(priv); - - priv->hw_params.sens = &iwl4965_sensitivity; - priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS; - - return 0; -} - -static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res) -{ - s32 sign = 1; - - if (num < 0) { - sign = -sign; - num = -num; - } - if (denom < 0) { - sign = -sign; - denom = -denom; - } - *res = 1; - *res = ((num * 2 + denom) / (denom * 2)) * sign; - - return 1; -} - -/** - * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower - * - * Determines power supply voltage compensation for txpower calculations. - * Returns number of 1/2-dB steps to subtract from gain table index, - * to compensate for difference between power supply voltage during - * factory measurements, vs. current power supply voltage. - * - * Voltage indication is higher for lower voltage. - * Lower voltage requires more gain (lower gain table index). - */ -static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage, - s32 current_voltage) -{ - s32 comp = 0; - - if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) || - (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage)) - return 0; - - iwl4965_math_div_round(current_voltage - eeprom_voltage, - TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp); - - if (current_voltage > eeprom_voltage) - comp *= 2; - if ((comp < -2) || (comp > 2)) - comp = 0; - - return comp; -} - -static s32 iwl4965_get_tx_atten_grp(u16 channel) -{ - if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH && - channel <= CALIB_IWL_TX_ATTEN_GR5_LCH) - return CALIB_CH_GROUP_5; - - if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH && - channel <= CALIB_IWL_TX_ATTEN_GR1_LCH) - return CALIB_CH_GROUP_1; - - if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH && - channel <= CALIB_IWL_TX_ATTEN_GR2_LCH) - return CALIB_CH_GROUP_2; - - if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH && - channel <= CALIB_IWL_TX_ATTEN_GR3_LCH) - return CALIB_CH_GROUP_3; - - if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH && - channel <= CALIB_IWL_TX_ATTEN_GR4_LCH) - return CALIB_CH_GROUP_4; - - return -1; -} - -static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel) -{ - s32 b = -1; - - for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) { - if (priv->calib_info->band_info[b].ch_from == 0) - continue; - - if ((channel >= priv->calib_info->band_info[b].ch_from) - && (channel <= priv->calib_info->band_info[b].ch_to)) - break; - } - - return b; -} - -static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) -{ - s32 val; - - if (x2 == x1) - return y1; - else { - iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val); - return val + y2; - } -} - -/** - * iwl4965_interpolate_chan - Interpolate factory measurements for one channel - * - * Interpolates factory measurements from the two sample channels within a - * sub-band, to apply to channel of interest. Interpolation is proportional to - * differences in channel frequencies, which is proportional to differences - * in channel number. - */ -static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, - struct iwl_eeprom_calib_ch_info *chan_info) -{ - s32 s = -1; - u32 c; - u32 m; - const struct iwl_eeprom_calib_measure *m1; - const struct iwl_eeprom_calib_measure *m2; - struct iwl_eeprom_calib_measure *omeas; - u32 ch_i1; - u32 ch_i2; - - s = iwl4965_get_sub_band(priv, channel); - if (s >= EEPROM_TX_POWER_BANDS) { - IWL_ERR(priv, "Tx Power can not find channel %d\n", channel); - return -1; - } - - ch_i1 = priv->calib_info->band_info[s].ch1.ch_num; - ch_i2 = priv->calib_info->band_info[s].ch2.ch_num; - chan_info->ch_num = (u8) channel; - - IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n", - channel, s, ch_i1, ch_i2); - - for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) { - for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) { - m1 = &(priv->calib_info->band_info[s].ch1. - measurements[c][m]); - m2 = &(priv->calib_info->band_info[s].ch2. - measurements[c][m]); - omeas = &(chan_info->measurements[c][m]); - - omeas->actual_pow = - (u8) iwl4965_interpolate_value(channel, ch_i1, - m1->actual_pow, - ch_i2, - m2->actual_pow); - omeas->gain_idx = - (u8) iwl4965_interpolate_value(channel, ch_i1, - m1->gain_idx, ch_i2, - m2->gain_idx); - omeas->temperature = - (u8) iwl4965_interpolate_value(channel, ch_i1, - m1->temperature, - ch_i2, - m2->temperature); - omeas->pa_det = - (s8) iwl4965_interpolate_value(channel, ch_i1, - m1->pa_det, ch_i2, - m2->pa_det); - - IWL_DEBUG_TXPOWER(priv, - "chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m, - m1->actual_pow, m2->actual_pow, omeas->actual_pow); - IWL_DEBUG_TXPOWER(priv, - "chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m, - m1->gain_idx, m2->gain_idx, omeas->gain_idx); - IWL_DEBUG_TXPOWER(priv, - "chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m, - m1->pa_det, m2->pa_det, omeas->pa_det); - IWL_DEBUG_TXPOWER(priv, - "chain %d meas %d T1=%d T2=%d T=%d\n", c, m, - m1->temperature, m2->temperature, - omeas->temperature); - } - } - - return 0; -} - -/* bit-rate-dependent table to prevent Tx distortion, in half-dB units, - * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */ -static s32 back_off_table[] = { - 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */ - 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */ - 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */ - 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */ - 10 /* CCK */ -}; - -/* Thermal compensation values for txpower for various frequency ranges ... - * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */ -static struct iwl4965_txpower_comp_entry { - s32 degrees_per_05db_a; - s32 degrees_per_05db_a_denom; -} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = { - {9, 2}, /* group 0 5.2, ch 34-43 */ - {4, 1}, /* group 1 5.2, ch 44-70 */ - {4, 1}, /* group 2 5.2, ch 71-124 */ - {4, 1}, /* group 3 5.2, ch 125-200 */ - {3, 1} /* group 4 2.4, ch all */ -}; - -static s32 get_min_power_index(s32 rate_power_index, u32 band) -{ - if (!band) { - if ((rate_power_index & 7) <= 4) - return MIN_TX_GAIN_INDEX_52GHZ_EXT; - } - return MIN_TX_GAIN_INDEX; -} - -struct gain_entry { - u8 dsp; - u8 radio; -}; - -static const struct gain_entry gain_table[2][108] = { - /* 5.2GHz power gain index table */ - { - {123, 0x3F}, /* highest txpower */ - {117, 0x3F}, - {110, 0x3F}, - {104, 0x3F}, - {98, 0x3F}, - {110, 0x3E}, - {104, 0x3E}, - {98, 0x3E}, - {110, 0x3D}, - {104, 0x3D}, - {98, 0x3D}, - {110, 0x3C}, - {104, 0x3C}, - {98, 0x3C}, - {110, 0x3B}, - {104, 0x3B}, - {98, 0x3B}, - {110, 0x3A}, - {104, 0x3A}, - {98, 0x3A}, - {110, 0x39}, - {104, 0x39}, - {98, 0x39}, - {110, 0x38}, - {104, 0x38}, - {98, 0x38}, - {110, 0x37}, - {104, 0x37}, - {98, 0x37}, - {110, 0x36}, - {104, 0x36}, - {98, 0x36}, - {110, 0x35}, - {104, 0x35}, - {98, 0x35}, - {110, 0x34}, - {104, 0x34}, - {98, 0x34}, - {110, 0x33}, - {104, 0x33}, - {98, 0x33}, - {110, 0x32}, - {104, 0x32}, - {98, 0x32}, - {110, 0x31}, - {104, 0x31}, - {98, 0x31}, - {110, 0x30}, - {104, 0x30}, - {98, 0x30}, - {110, 0x25}, - {104, 0x25}, - {98, 0x25}, - {110, 0x24}, - {104, 0x24}, - {98, 0x24}, - {110, 0x23}, - {104, 0x23}, - {98, 0x23}, - {110, 0x22}, - {104, 0x18}, - {98, 0x18}, - {110, 0x17}, - {104, 0x17}, - {98, 0x17}, - {110, 0x16}, - {104, 0x16}, - {98, 0x16}, - {110, 0x15}, - {104, 0x15}, - {98, 0x15}, - {110, 0x14}, - {104, 0x14}, - {98, 0x14}, - {110, 0x13}, - {104, 0x13}, - {98, 0x13}, - {110, 0x12}, - {104, 0x08}, - {98, 0x08}, - {110, 0x07}, - {104, 0x07}, - {98, 0x07}, - {110, 0x06}, - {104, 0x06}, - {98, 0x06}, - {110, 0x05}, - {104, 0x05}, - {98, 0x05}, - {110, 0x04}, - {104, 0x04}, - {98, 0x04}, - {110, 0x03}, - {104, 0x03}, - {98, 0x03}, - {110, 0x02}, - {104, 0x02}, - {98, 0x02}, - {110, 0x01}, - {104, 0x01}, - {98, 0x01}, - {110, 0x00}, - {104, 0x00}, - {98, 0x00}, - {93, 0x00}, - {88, 0x00}, - {83, 0x00}, - {78, 0x00}, - }, - /* 2.4GHz power gain index table */ - { - {110, 0x3f}, /* highest txpower */ - {104, 0x3f}, - {98, 0x3f}, - {110, 0x3e}, - {104, 0x3e}, - {98, 0x3e}, - {110, 0x3d}, - {104, 0x3d}, - {98, 0x3d}, - {110, 0x3c}, - {104, 0x3c}, - {98, 0x3c}, - {110, 0x3b}, - {104, 0x3b}, - {98, 0x3b}, - {110, 0x3a}, - {104, 0x3a}, - {98, 0x3a}, - {110, 0x39}, - {104, 0x39}, - {98, 0x39}, - {110, 0x38}, - {104, 0x38}, - {98, 0x38}, - {110, 0x37}, - {104, 0x37}, - {98, 0x37}, - {110, 0x36}, - {104, 0x36}, - {98, 0x36}, - {110, 0x35}, - {104, 0x35}, - {98, 0x35}, - {110, 0x34}, - {104, 0x34}, - {98, 0x34}, - {110, 0x33}, - {104, 0x33}, - {98, 0x33}, - {110, 0x32}, - {104, 0x32}, - {98, 0x32}, - {110, 0x31}, - {104, 0x31}, - {98, 0x31}, - {110, 0x30}, - {104, 0x30}, - {98, 0x30}, - {110, 0x6}, - {104, 0x6}, - {98, 0x6}, - {110, 0x5}, - {104, 0x5}, - {98, 0x5}, - {110, 0x4}, - {104, 0x4}, - {98, 0x4}, - {110, 0x3}, - {104, 0x3}, - {98, 0x3}, - {110, 0x2}, - {104, 0x2}, - {98, 0x2}, - {110, 0x1}, - {104, 0x1}, - {98, 0x1}, - {110, 0x0}, - {104, 0x0}, - {98, 0x0}, - {97, 0}, - {96, 0}, - {95, 0}, - {94, 0}, - {93, 0}, - {92, 0}, - {91, 0}, - {90, 0}, - {89, 0}, - {88, 0}, - {87, 0}, - {86, 0}, - {85, 0}, - {84, 0}, - {83, 0}, - {82, 0}, - {81, 0}, - {80, 0}, - {79, 0}, - {78, 0}, - {77, 0}, - {76, 0}, - {75, 0}, - {74, 0}, - {73, 0}, - {72, 0}, - {71, 0}, - {70, 0}, - {69, 0}, - {68, 0}, - {67, 0}, - {66, 0}, - {65, 0}, - {64, 0}, - {63, 0}, - {62, 0}, - {61, 0}, - {60, 0}, - {59, 0}, - } -}; - -static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, - u8 is_ht40, u8 ctrl_chan_high, - struct iwl4965_tx_power_db *tx_power_tbl) -{ - u8 saturation_power; - s32 target_power; - s32 user_target_power; - s32 power_limit; - s32 current_temp; - s32 reg_limit; - s32 current_regulatory; - s32 txatten_grp = CALIB_CH_GROUP_MAX; - int i; - int c; - const struct iwl_channel_info *ch_info = NULL; - struct iwl_eeprom_calib_ch_info ch_eeprom_info; - const struct iwl_eeprom_calib_measure *measurement; - s16 voltage; - s32 init_voltage; - s32 voltage_compensation; - s32 degrees_per_05db_num; - s32 degrees_per_05db_denom; - s32 factory_temp; - s32 temperature_comp[2]; - s32 factory_gain_index[2]; - s32 factory_actual_pwr[2]; - s32 power_index; - - /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units - * are used for indexing into txpower table) */ - user_target_power = 2 * priv->tx_power_user_lmt; - - /* Get current (RXON) channel, band, width */ - IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_ht40 %d\n", channel, band, - is_ht40); - - ch_info = iwl_get_channel_info(priv, priv->band, channel); - - if (!is_channel_valid(ch_info)) - return -EINVAL; - - /* get txatten group, used to select 1) thermal txpower adjustment - * and 2) mimo txpower balance between Tx chains. */ - txatten_grp = iwl4965_get_tx_atten_grp(channel); - if (txatten_grp < 0) { - IWL_ERR(priv, "Can't find txatten group for channel %d.\n", - channel); - return -EINVAL; - } - - IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n", - channel, txatten_grp); - - if (is_ht40) { - if (ctrl_chan_high) - channel -= 2; - else - channel += 2; - } - - /* hardware txpower limits ... - * saturation (clipping distortion) txpowers are in half-dBm */ - if (band) - saturation_power = priv->calib_info->saturation_power24; - else - saturation_power = priv->calib_info->saturation_power52; - - if (saturation_power < IWL_TX_POWER_SATURATION_MIN || - saturation_power > IWL_TX_POWER_SATURATION_MAX) { - if (band) - saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24; - else - saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52; - } - - /* regulatory txpower limits ... reg_limit values are in half-dBm, - * max_power_avg values are in dBm, convert * 2 */ - if (is_ht40) - reg_limit = ch_info->ht40_max_power_avg * 2; - else - reg_limit = ch_info->max_power_avg * 2; - - if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) || - (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) { - if (band) - reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24; - else - reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52; - } - - /* Interpolate txpower calibration values for this channel, - * based on factory calibration tests on spaced channels. */ - iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); - - /* calculate tx gain adjustment based on power supply voltage */ - voltage = le16_to_cpu(priv->calib_info->voltage); - init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); - voltage_compensation = - iwl4965_get_voltage_compensation(voltage, init_voltage); - - IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n", - init_voltage, - voltage, voltage_compensation); - - /* get current temperature (Celsius) */ - current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN); - current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX); - current_temp = KELVIN_TO_CELSIUS(current_temp); - - /* select thermal txpower adjustment params, based on channel group - * (same frequency group used for mimo txatten adjustment) */ - degrees_per_05db_num = - tx_power_cmp_tble[txatten_grp].degrees_per_05db_a; - degrees_per_05db_denom = - tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom; - - /* get per-chain txpower values from factory measurements */ - for (c = 0; c < 2; c++) { - measurement = &ch_eeprom_info.measurements[c][1]; - - /* txgain adjustment (in half-dB steps) based on difference - * between factory and current temperature */ - factory_temp = measurement->temperature; - iwl4965_math_div_round((current_temp - factory_temp) * - degrees_per_05db_denom, - degrees_per_05db_num, - &temperature_comp[c]); - - factory_gain_index[c] = measurement->gain_idx; - factory_actual_pwr[c] = measurement->actual_pow; - - IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c); - IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, " - "curr tmp %d, comp %d steps\n", - factory_temp, current_temp, - temperature_comp[c]); - - IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n", - factory_gain_index[c], - factory_actual_pwr[c]); - } - - /* for each of 33 bit-rates (including 1 for CCK) */ - for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) { - u8 is_mimo_rate; - union iwl4965_tx_power_dual_stream tx_power; - - /* for mimo, reduce each chain's txpower by half - * (3dB, 6 steps), so total output power is regulatory - * compliant. */ - if (i & 0x8) { - current_regulatory = reg_limit - - IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION; - is_mimo_rate = 1; - } else { - current_regulatory = reg_limit; - is_mimo_rate = 0; - } - - /* find txpower limit, either hardware or regulatory */ - power_limit = saturation_power - back_off_table[i]; - if (power_limit > current_regulatory) - power_limit = current_regulatory; - - /* reduce user's txpower request if necessary - * for this rate on this channel */ - target_power = user_target_power; - if (target_power > power_limit) - target_power = power_limit; - - IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n", - i, saturation_power - back_off_table[i], - current_regulatory, user_target_power, - target_power); - - /* for each of 2 Tx chains (radio transmitters) */ - for (c = 0; c < 2; c++) { - s32 atten_value; - - if (is_mimo_rate) - atten_value = - (s32)le32_to_cpu(priv->card_alive_init. - tx_atten[txatten_grp][c]); - else - atten_value = 0; - - /* calculate index; higher index means lower txpower */ - power_index = (u8) (factory_gain_index[c] - - (target_power - - factory_actual_pwr[c]) - - temperature_comp[c] - - voltage_compensation + - atten_value); - -/* IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n", - power_index); */ - - if (power_index < get_min_power_index(i, band)) - power_index = get_min_power_index(i, band); - - /* adjust 5 GHz index to support negative indexes */ - if (!band) - power_index += 9; - - /* CCK, rate 32, reduce txpower for CCK */ - if (i == POWER_TABLE_CCK_ENTRY) - power_index += - IWL_TX_POWER_CCK_COMPENSATION_C_STEP; - - /* stay within the table! */ - if (power_index > 107) { - IWL_WARN(priv, "txpower index %d > 107\n", - power_index); - power_index = 107; - } - if (power_index < 0) { - IWL_WARN(priv, "txpower index %d < 0\n", - power_index); - power_index = 0; - } - - /* fill txpower command for this rate/chain */ - tx_power.s.radio_tx_gain[c] = - gain_table[band][power_index].radio; - tx_power.s.dsp_predis_atten[c] = - gain_table[band][power_index].dsp; - - IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d " - "gain 0x%02x dsp %d\n", - c, atten_value, power_index, - tx_power.s.radio_tx_gain[c], - tx_power.s.dsp_predis_atten[c]); - } /* for each chain */ - - tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); - - } /* for each rate */ - - return 0; -} - -/** - * iwl4965_send_tx_power - Configure the TXPOWER level user limit - * - * Uses the active RXON for channel, band, and characteristics (ht40, high) - * The power limit is taken from priv->tx_power_user_lmt. - */ -static int iwl4965_send_tx_power(struct iwl_priv *priv) -{ - struct iwl4965_txpowertable_cmd cmd = { 0 }; - int ret; - u8 band = 0; - bool is_ht40 = false; - u8 ctrl_chan_high = 0; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), - "TX Power requested while scanning!\n")) - return -EAGAIN; - - band = priv->band == IEEE80211_BAND_2GHZ; - - is_ht40 = is_ht40_channel(ctx->active.flags); - - if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) - ctrl_chan_high = 1; - - cmd.band = band; - cmd.channel = ctx->active.channel; - - ret = iwl4965_fill_txpower_tbl(priv, band, - le16_to_cpu(ctx->active.channel), - is_ht40, ctrl_chan_high, &cmd.tx_power); - if (ret) - goto out; - - ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd); - -out: - return ret; -} - -static int iwl4965_send_rxon_assoc(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - int ret = 0; - struct iwl4965_rxon_assoc_cmd rxon_assoc; - const struct iwl_rxon_cmd *rxon1 = &ctx->staging; - const struct iwl_rxon_cmd *rxon2 = &ctx->active; - - if ((rxon1->flags == rxon2->flags) && - (rxon1->filter_flags == rxon2->filter_flags) && - (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && - (rxon1->ofdm_ht_single_stream_basic_rates == - rxon2->ofdm_ht_single_stream_basic_rates) && - (rxon1->ofdm_ht_dual_stream_basic_rates == - rxon2->ofdm_ht_dual_stream_basic_rates) && - (rxon1->rx_chain == rxon2->rx_chain) && - (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { - IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n"); - return 0; - } - - rxon_assoc.flags = ctx->staging.flags; - rxon_assoc.filter_flags = ctx->staging.filter_flags; - rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; - rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; - rxon_assoc.reserved = 0; - rxon_assoc.ofdm_ht_single_stream_basic_rates = - ctx->staging.ofdm_ht_single_stream_basic_rates; - rxon_assoc.ofdm_ht_dual_stream_basic_rates = - ctx->staging.ofdm_ht_dual_stream_basic_rates; - rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain; - - ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC, - sizeof(rxon_assoc), &rxon_assoc, NULL); - if (ret) - return ret; - - return ret; -} - -static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - /* cast away the const for active_rxon in this function */ - struct iwl_rxon_cmd *active_rxon = (void *)&ctx->active; - int ret; - bool new_assoc = - !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK); - - if (!iwl_is_alive(priv)) - return -EBUSY; - - if (!ctx->is_active) - return 0; - - /* always get timestamp with Rx frame */ - ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK; - - ret = iwl_check_rxon_cmd(priv, ctx); - if (ret) { - IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); - return -EINVAL; - } - - /* - * receive commit_rxon request - * abort any previous channel switch if still in process - */ - if (priv->switch_rxon.switch_in_progress && - (priv->switch_rxon.channel != ctx->staging.channel)) { - IWL_DEBUG_11H(priv, "abort channel switch on %d\n", - le16_to_cpu(priv->switch_rxon.channel)); - iwl_chswitch_done(priv, false); - } - - /* If we don't need to send a full RXON, we can use - * iwl_rxon_assoc_cmd which is used to reconfigure filter - * and other flags for the current radio configuration. */ - if (!iwl_full_rxon_required(priv, ctx)) { - ret = iwl_send_rxon_assoc(priv, ctx); - if (ret) { - IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); - return ret; - } - - memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); - iwl_print_rx_config_cmd(priv, ctx); - return 0; - } - - /* If we are currently associated and the new config requires - * an RXON_ASSOC and the new config wants the associated mask enabled, - * we must clear the associated from the active configuration - * before we apply the new config */ - if (iwl_is_associated_ctx(ctx) && new_assoc) { - IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n"); - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, - sizeof(struct iwl_rxon_cmd), - active_rxon); - - /* If the mask clearing failed then we set - * active_rxon back to what it was previously */ - if (ret) { - active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; - IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret); - return ret; - } - iwl_clear_ucode_stations(priv, ctx); - iwl_restore_stations(priv, ctx); - ret = iwl_restore_default_wep_keys(priv, ctx); - if (ret) { - IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); - return ret; - } - } - - IWL_DEBUG_INFO(priv, "Sending RXON\n" - "* with%s RXON_FILTER_ASSOC_MSK\n" - "* channel = %d\n" - "* bssid = %pM\n", - (new_assoc ? "" : "out"), - le16_to_cpu(ctx->staging.channel), - ctx->staging.bssid_addr); - - iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto); - - /* Apply the new configuration - * RXON unassoc clears the station table in uCode so restoration of - * stations is needed after it (the RXON command) completes - */ - if (!new_assoc) { - ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, - sizeof(struct iwl_rxon_cmd), &ctx->staging); - if (ret) { - IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); - return ret; - } - IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n"); - memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); - iwl_clear_ucode_stations(priv, ctx); - iwl_restore_stations(priv, ctx); - ret = iwl_restore_default_wep_keys(priv, ctx); - if (ret) { - IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); - return ret; - } - } - if (new_assoc) { - priv->start_calib = 0; - /* Apply the new configuration - * RXON assoc doesn't clear the station table in uCode, - */ - ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, - sizeof(struct iwl_rxon_cmd), &ctx->staging); - if (ret) { - IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); - return ret; - } - memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); - } - iwl_print_rx_config_cmd(priv, ctx); - - iwl_init_sensitivity(priv); - - /* If we issue a new RXON command which required a tune then we must - * send a new TXPOWER command or we won't be able to Tx any frames */ - ret = iwl_set_tx_power(priv, priv->tx_power_next, true); - if (ret) { - IWL_ERR(priv, "Error sending TX power (%d)\n", ret); - return ret; - } - - return 0; -} - -static int iwl4965_hw_channel_switch(struct iwl_priv *priv, - struct ieee80211_channel_switch *ch_switch) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - int rc; - u8 band = 0; - bool is_ht40 = false; - u8 ctrl_chan_high = 0; - struct iwl4965_channel_switch_cmd cmd; - const struct iwl_channel_info *ch_info; - u32 switch_time_in_usec, ucode_switch_time; - u16 ch; - u32 tsf_low; - u8 switch_count; - u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); - struct ieee80211_vif *vif = ctx->vif; - band = priv->band == IEEE80211_BAND_2GHZ; - - is_ht40 = is_ht40_channel(ctx->staging.flags); - - if (is_ht40 && - (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) - ctrl_chan_high = 1; - - cmd.band = band; - cmd.expect_beacon = 0; - ch = ch_switch->channel->hw_value; - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; - switch_count = ch_switch->count; - tsf_low = ch_switch->timestamp & 0x0ffffffff; - /* - * calculate the ucode channel switch time - * adding TSF as one of the factor for when to switch - */ - if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { - if (switch_count > ((priv->ucode_beacon_time - tsf_low) / - beacon_interval)) { - switch_count -= (priv->ucode_beacon_time - - tsf_low) / beacon_interval; - } else - switch_count = 0; - } - if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); - else { - switch_time_in_usec = - vif->bss_conf.beacon_int * switch_count * TIME_UNIT; - ucode_switch_time = iwl_usecs_to_beacons(priv, - switch_time_in_usec, - beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); - } - IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - ch_info = iwl_get_channel_info(priv, priv->band, ch); - if (ch_info) - cmd.expect_beacon = is_channel_radar(ch_info); - else { - IWL_ERR(priv, "invalid channel switch from %u to %u\n", - ctx->active.channel, ch); - return -EFAULT; - } - - rc = iwl4965_fill_txpower_tbl(priv, band, ch, is_ht40, - ctrl_chan_high, &cmd.tx_power); - if (rc) { - IWL_DEBUG_11H(priv, "error:%d fill txpower_tbl\n", rc); - return rc; - } - - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; - - return iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); -} - -/** - * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array - */ -static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, - struct iwl_tx_queue *txq, - u16 byte_cnt) -{ - struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr; - int txq_id = txq->q.id; - int write_ptr = txq->q.write_ptr; - int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; - __le16 bc_ent; - - WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX); - - bc_ent = cpu_to_le16(len & 0xFFF); - /* Set up byte count within first 256 entries */ - scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent; - - /* If within first 64 entries, duplicate at end */ - if (write_ptr < TFD_QUEUE_SIZE_BC_DUP) - scd_bc_tbl[txq_id]. - tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent; -} - -/** - * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin) - * @statistics: Provides the temperature reading from the uCode - * - * A return of <0 indicates bogus data in the statistics - */ -static int iwl4965_hw_get_temperature(struct iwl_priv *priv) -{ - s32 temperature; - s32 vt; - s32 R1, R2, R3; - u32 R4; - - if (test_bit(STATUS_TEMPERATURE, &priv->status) && - (priv->_agn.statistics.flag & - STATISTICS_REPLY_FLG_HT40_MODE_MSK)) { - IWL_DEBUG_TEMP(priv, "Running HT40 temperature calibration\n"); - R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]); - R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]); - R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]); - R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]); - } else { - IWL_DEBUG_TEMP(priv, "Running temperature calibration\n"); - R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]); - R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]); - R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]); - R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]); - } - - /* - * Temperature is only 23 bits, so sign extend out to 32. - * - * NOTE If we haven't received a statistics notification yet - * with an updated temperature, use R4 provided to us in the - * "initialize" ALIVE response. - */ - if (!test_bit(STATUS_TEMPERATURE, &priv->status)) - vt = sign_extend32(R4, 23); - else - vt = sign_extend32(le32_to_cpu(priv->_agn.statistics. - general.common.temperature), 23); - - IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt); - - if (R3 == R1) { - IWL_ERR(priv, "Calibration conflict R1 == R3\n"); - return -1; - } - - /* Calculate temperature in degrees Kelvin, adjust by 97%. - * Add offset to center the adjustment around 0 degrees Centigrade. */ - temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2); - temperature /= (R3 - R1); - temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET; - - IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n", - temperature, KELVIN_TO_CELSIUS(temperature)); - - return temperature; -} - -/* Adjust Txpower only if temperature variance is greater than threshold. */ -#define IWL_TEMPERATURE_THRESHOLD 3 - -/** - * iwl4965_is_temp_calib_needed - determines if new calibration is needed - * - * If the temperature changed has changed sufficiently, then a recalibration - * is needed. - * - * Assumes caller will replace priv->last_temperature once calibration - * executed. - */ -static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv) -{ - int temp_diff; - - if (!test_bit(STATUS_STATISTICS, &priv->status)) { - IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n"); - return 0; - } - - temp_diff = priv->temperature - priv->last_temperature; - - /* get absolute value */ - if (temp_diff < 0) { - IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff); - temp_diff = -temp_diff; - } else if (temp_diff == 0) - IWL_DEBUG_POWER(priv, "Temperature unchanged\n"); - else - IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff); - - if (temp_diff < IWL_TEMPERATURE_THRESHOLD) { - IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n"); - return 0; - } - - IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n"); - - return 1; -} - -static void iwl4965_temperature_calib(struct iwl_priv *priv) -{ - s32 temp; - - temp = iwl4965_hw_get_temperature(priv); - if (temp < 0) - return; - - if (priv->temperature != temp) { - if (priv->temperature) - IWL_DEBUG_TEMP(priv, "Temperature changed " - "from %dC to %dC\n", - KELVIN_TO_CELSIUS(priv->temperature), - KELVIN_TO_CELSIUS(temp)); - else - IWL_DEBUG_TEMP(priv, "Temperature " - "initialized to %dC\n", - KELVIN_TO_CELSIUS(temp)); - } - - priv->temperature = temp; - iwl_tt_handler(priv); - set_bit(STATUS_TEMPERATURE, &priv->status); - - if (!priv->disable_tx_power_cal && - unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && - iwl4965_is_temp_calib_needed(priv)) - queue_work(priv->workqueue, &priv->txpower_work); -} - -/** - * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration - */ -static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv, - u16 txq_id) -{ - /* Simply stop the queue, but don't change any configuration; - * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ - iwl_write_prph(priv, - IWL49_SCD_QUEUE_STATUS_BITS(txq_id), - (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)| - (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); -} - -/** - * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE - * priv->lock must be held by the caller - */ -static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id, - u16 ssn_idx, u8 tx_fifo) -{ - if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) || - (IWL49_FIRST_AMPDU_QUEUE + - priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) { - IWL_WARN(priv, - "queue number out of range: %d, must be %d to %d\n", - txq_id, IWL49_FIRST_AMPDU_QUEUE, - IWL49_FIRST_AMPDU_QUEUE + - priv->cfg->base_params->num_of_ampdu_queues - 1); - return -EINVAL; - } - - iwl4965_tx_queue_stop_scheduler(priv, txq_id); - - iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); - - priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); - priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); - /* supposes that ssn_idx is valid (!= 0xFFF) */ - iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx); - - iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); - iwl_txq_ctx_deactivate(priv, txq_id); - iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0); - - return 0; -} - -/** - * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue - */ -static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid, - u16 txq_id) -{ - u32 tbl_dw_addr; - u32 tbl_dw; - u16 scd_q2ratid; - - scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; - - tbl_dw_addr = priv->scd_base_addr + - IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); - - tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr); - - if (txq_id & 0x1) - tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); - else - tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); - - iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw); - - return 0; -} - - -/** - * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue - * - * NOTE: txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE, - * i.e. it must be one of the higher queues used for aggregation - */ -static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id, - int tx_fifo, int sta_id, int tid, u16 ssn_idx) -{ - unsigned long flags; - u16 ra_tid; - int ret; - - if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) || - (IWL49_FIRST_AMPDU_QUEUE + - priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) { - IWL_WARN(priv, - "queue number out of range: %d, must be %d to %d\n", - txq_id, IWL49_FIRST_AMPDU_QUEUE, - IWL49_FIRST_AMPDU_QUEUE + - priv->cfg->base_params->num_of_ampdu_queues - 1); - return -EINVAL; - } - - ra_tid = BUILD_RAxTID(sta_id, tid); - - /* Modify device's station table to Tx this TID */ - ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid); - if (ret) - return ret; - - spin_lock_irqsave(&priv->lock, flags); - - /* Stop this Tx queue before configuring it */ - iwl4965_tx_queue_stop_scheduler(priv, txq_id); - - /* Map receiver-address / traffic-ID to this queue */ - iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id); - - /* Set this queue as a chain-building queue */ - iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); - - /* Place first TFD at index corresponding to start sequence number. - * Assumes that ssn_idx is valid (!= 0xFFF) */ - priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); - priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); - iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx); - - /* Set up Tx window size and frame limit for this queue */ - iwl_write_targ_mem(priv, - priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), - (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); - - iwl_write_targ_mem(priv, priv->scd_base_addr + - IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), - (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) - & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); - - iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); - - /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ - iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1); - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - - -static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len) -{ - switch (cmd_id) { - case REPLY_RXON: - return (u16) sizeof(struct iwl4965_rxon_cmd); - default: - return len; - } -} - -static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) -{ - struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data; - addsta->mode = cmd->mode; - memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); - memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); - addsta->station_flags = cmd->station_flags; - addsta->station_flags_msk = cmd->station_flags_msk; - addsta->tid_disable_tx = cmd->tid_disable_tx; - addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; - addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; - addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; - addsta->sleep_tx_count = cmd->sleep_tx_count; - addsta->reserved1 = cpu_to_le16(0); - addsta->reserved2 = cpu_to_le16(0); - - return (u16)sizeof(struct iwl4965_addsta_cmd); -} - -static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp) -{ - return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN; -} - -/** - * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue - */ -static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, - struct iwl_ht_agg *agg, - struct iwl4965_tx_resp *tx_resp, - int txq_id, u16 start_idx) -{ - u16 status; - struct agg_tx_status *frame_status = tx_resp->u.agg_status; - struct ieee80211_tx_info *info = NULL; - struct ieee80211_hdr *hdr = NULL; - u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); - int i, sh, idx; - u16 seq; - if (agg->wait_for_ba) - IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n"); - - agg->frame_count = tx_resp->frame_count; - agg->start_idx = start_idx; - agg->rate_n_flags = rate_n_flags; - agg->bitmap = 0; - - /* num frames attempted by Tx command */ - if (agg->frame_count == 1) { - /* Only one frame was attempted; no block-ack will arrive */ - status = le16_to_cpu(frame_status[0].status); - idx = start_idx; - - /* FIXME: code repetition */ - IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n", - agg->frame_count, agg->start_idx, idx); - - info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb); - info->status.rates[0].count = tx_resp->failure_frame + 1; - info->flags &= ~IEEE80211_TX_CTL_AMPDU; - info->flags |= iwl_tx_status_to_mac80211(status); - iwlagn_hwrate_to_tx_control(priv, rate_n_flags, info); - /* FIXME: code repetition end */ - - IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n", - status & 0xff, tx_resp->failure_frame); - IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags); - - agg->wait_for_ba = 0; - } else { - /* Two or more frames were attempted; expect block-ack */ - u64 bitmap = 0; - int start = agg->start_idx; - - /* Construct bit-map of pending frames within Tx window */ - for (i = 0; i < agg->frame_count; i++) { - u16 sc; - status = le16_to_cpu(frame_status[i].status); - seq = le16_to_cpu(frame_status[i].sequence); - idx = SEQ_TO_INDEX(seq); - txq_id = SEQ_TO_QUEUE(seq); - - if (status & (AGG_TX_STATE_FEW_BYTES_MSK | - AGG_TX_STATE_ABORT_MSK)) - continue; - - IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n", - agg->frame_count, txq_id, idx); - - hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx); - if (!hdr) { - IWL_ERR(priv, - "BUG_ON idx doesn't point to valid skb" - " idx=%d, txq_id=%d\n", idx, txq_id); - return -1; - } - - sc = le16_to_cpu(hdr->seq_ctrl); - if (idx != (SEQ_TO_SN(sc) & 0xff)) { - IWL_ERR(priv, - "BUG_ON idx doesn't match seq control" - " idx=%d, seq_idx=%d, seq=%d\n", - idx, SEQ_TO_SN(sc), hdr->seq_ctrl); - return -1; - } - - IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n", - i, idx, SEQ_TO_SN(sc)); - - sh = idx - start; - if (sh > 64) { - sh = (start - idx) + 0xff; - bitmap = bitmap << sh; - sh = 0; - start = idx; - } else if (sh < -64) - sh = 0xff - (start - idx); - else if (sh < 0) { - sh = start - idx; - start = idx; - bitmap = bitmap << sh; - sh = 0; - } - bitmap |= 1ULL << sh; - IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n", - start, (unsigned long long)bitmap); - } - - agg->bitmap = bitmap; - agg->start_idx = start; - IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n", - agg->frame_count, agg->start_idx, - (unsigned long long)agg->bitmap); - - if (bitmap) - agg->wait_for_ba = 1; - } - return 0; -} - -static u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr) -{ - int i; - int start = 0; - int ret = IWL_INVALID_STATION; - unsigned long flags; - - if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) || - (priv->iw_mode == NL80211_IFTYPE_AP)) - start = IWL_STA_ID; - - if (is_broadcast_ether_addr(addr)) - return priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; - - spin_lock_irqsave(&priv->sta_lock, flags); - for (i = start; i < priv->hw_params.max_stations; i++) - if (priv->stations[i].used && - (!compare_ether_addr(priv->stations[i].sta.sta.addr, - addr))) { - ret = i; - goto out; - } - - IWL_DEBUG_ASSOC_LIMIT(priv, "can not find STA %pM total %d\n", - addr, priv->num_stations); - - out: - /* - * It may be possible that more commands interacting with stations - * arrive before we completed processing the adding of - * station - */ - if (ret != IWL_INVALID_STATION && - (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) || - ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) && - (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) { - IWL_ERR(priv, "Requested station info for sta %d before ready.\n", - ret); - ret = IWL_INVALID_STATION; - } - spin_unlock_irqrestore(&priv->sta_lock, flags); - return ret; -} - -static int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) -{ - if (priv->iw_mode == NL80211_IFTYPE_STATION) { - return IWL_AP_ID; - } else { - u8 *da = ieee80211_get_DA(hdr); - return iwl_find_station(priv, da); - } -} - -/** - * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response - */ -static void iwl4965_rx_reply_tx(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int index = SEQ_TO_INDEX(sequence); - struct iwl_tx_queue *txq = &priv->txq[txq_id]; - struct ieee80211_hdr *hdr; - struct ieee80211_tx_info *info; - struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; - u32 status = le32_to_cpu(tx_resp->u.status); - int uninitialized_var(tid); - int sta_id; - int freed; - u8 *qc = NULL; - unsigned long flags; - - if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) { - IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d " - "is out of range [0-%d] %d %d\n", txq_id, - index, txq->q.n_bd, txq->q.write_ptr, - txq->q.read_ptr); - return; - } - - txq->time_stamp = jiffies; - info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb); - memset(&info->status, 0, sizeof(info->status)); - - hdr = iwl_tx_queue_get_hdr(priv, txq_id, index); - if (ieee80211_is_data_qos(hdr->frame_control)) { - qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; - } - - sta_id = iwl_get_ra_sta_id(priv, hdr); - if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) { - IWL_ERR(priv, "Station not known\n"); - return; - } - - spin_lock_irqsave(&priv->sta_lock, flags); - if (txq->sched_retry) { - const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp); - struct iwl_ht_agg *agg = NULL; - WARN_ON(!qc); - - agg = &priv->stations[sta_id].tid[tid].agg; - - iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); - - /* check if BAR is needed */ - if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status)) - info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - - if (txq->q.read_ptr != (scd_ssn & 0xff)) { - index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); - IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn " - "%d index %d\n", scd_ssn , index); - freed = iwlagn_tx_queue_reclaim(priv, txq_id, index); - if (qc) - iwl_free_tfds_in_queue(priv, sta_id, - tid, freed); - - if (priv->mac80211_registered && - (iwl_queue_space(&txq->q) > txq->q.low_mark) && - (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) - iwl_wake_queue(priv, txq); - } - } else { - info->status.rates[0].count = tx_resp->failure_frame + 1; - info->flags |= iwl_tx_status_to_mac80211(status); - iwlagn_hwrate_to_tx_control(priv, - le32_to_cpu(tx_resp->rate_n_flags), - info); - - IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) " - "rate_n_flags 0x%x retries %d\n", - txq_id, - iwl_get_tx_fail_reason(status), status, - le32_to_cpu(tx_resp->rate_n_flags), - tx_resp->failure_frame); - - freed = iwlagn_tx_queue_reclaim(priv, txq_id, index); - if (qc && likely(sta_id != IWL_INVALID_STATION)) - iwl_free_tfds_in_queue(priv, sta_id, tid, freed); - else if (sta_id == IWL_INVALID_STATION) - IWL_DEBUG_TX_REPLY(priv, "Station not known\n"); - - if (priv->mac80211_registered && - (iwl_queue_space(&txq->q) > txq->q.low_mark)) - iwl_wake_queue(priv, txq); - } - if (qc && likely(sta_id != IWL_INVALID_STATION)) - iwlagn_txq_check_empty(priv, sta_id, tid, txq_id); - - iwl_check_abort_status(priv, tx_resp->frame_count, status); - - spin_unlock_irqrestore(&priv->sta_lock, flags); -} - -static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl4965_beacon_notif *beacon = (void *)pkt->u.raw; -#ifdef CONFIG_IWLWIFI_DEBUG - u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); - - IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d " - "tsf:0x%.8x%.8x rate:%d\n", - le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), - le32_to_cpu(beacon->low_tsf), rate); -#endif - - priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->beacon_update); -} - -static int iwl4965_calc_rssi(struct iwl_priv *priv, - struct iwl_rx_phy_res *rx_resp) -{ - /* data from PHY/DSP regarding signal strength, etc., - * contents are always there, not configurable by host. */ - struct iwl4965_rx_non_cfg_phy *ncphy = - (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; - u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK) - >> IWL49_AGC_DB_POS; - - u32 valid_antennae = - (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK) - >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; - u8 max_rssi = 0; - u32 i; - - /* Find max rssi among 3 possible receivers. - * These values are measured by the digital signal processor (DSP). - * They should stay fairly constant even as the signal strength varies, - * if the radio's automatic gain control (AGC) is working right. - * AGC value (see below) will provide the "interesting" info. */ - for (i = 0; i < 3; i++) - if (valid_antennae & (1 << i)) - max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); - - IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", - ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], - max_rssi, agc); - - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc - IWLAGN_RSSI_OFFSET; -} - - -/* Set up 4965-specific Rx frame reply handlers */ -static void iwl4965_rx_handler_setup(struct iwl_priv *priv) -{ - /* Legacy Rx frames */ - priv->rx_handlers[REPLY_RX] = iwlagn_rx_reply_rx; - /* Tx response */ - priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx; - priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; - - /* set up notification wait support */ - spin_lock_init(&priv->_agn.notif_wait_lock); - INIT_LIST_HEAD(&priv->_agn.notif_waits); - init_waitqueue_head(&priv->_agn.notif_waitq); -} - -static void iwl4965_setup_deferred_work(struct iwl_priv *priv) -{ - INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work); -} - -static void iwl4965_cancel_deferred_work(struct iwl_priv *priv) -{ - cancel_work_sync(&priv->txpower_work); -} - -static struct iwl_hcmd_ops iwl4965_hcmd = { - .rxon_assoc = iwl4965_send_rxon_assoc, - .commit_rxon = iwl4965_commit_rxon, - .set_rxon_chain = iwlagn_set_rxon_chain, - .send_bt_config = iwl_send_bt_config, -}; - -static void iwl4965_post_scan(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - /* - * Since setting the RXON may have been deferred while - * performing the scan, fire one off if needed - */ - if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) - iwlcore_commit_rxon(priv, ctx); -} - -static void iwl4965_post_associate(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_vif *vif = ctx->vif; - struct ieee80211_conf *conf = NULL; - int ret = 0; - - if (!vif || !priv->is_open) - return; - - if (vif->type == NL80211_IFTYPE_AP) { - IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__); - return; - } - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - iwl_scan_cancel_timeout(priv, 200); - - conf = ieee80211_get_hw_conf(priv->hw); - - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv, ctx); - - ret = iwl_send_rxon_timing(priv, ctx); - if (ret) - IWL_WARN(priv, "RXON timing - " - "Attempting to continue.\n"); - - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - - iwl_set_rxon_ht(priv, &priv->current_ht_config); - - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); - - ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid); - - IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n", - vif->bss_conf.aid, vif->bss_conf.beacon_int); - - if (vif->bss_conf.use_short_preamble) - ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { - if (vif->bss_conf.use_short_slot) - ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - } - - iwlcore_commit_rxon(priv, ctx); - - IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n", - vif->bss_conf.aid, ctx->active.bssid_addr); - - switch (vif->type) { - case NL80211_IFTYPE_STATION: - break; - case NL80211_IFTYPE_ADHOC: - iwlagn_send_beacon_cmd(priv); - break; - default: - IWL_ERR(priv, "%s Should not be called in %d mode\n", - __func__, vif->type); - break; - } - - /* the chain noise calibration will enabled PM upon completion - * If chain noise has already been run, then we need to enable - * power management here */ - if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) - iwl_power_update_mode(priv, false); - - /* Enable Rx differential gain and sensitivity calibrations */ - iwl_chain_noise_reset(priv); - priv->start_calib = 1; -} - -static void iwl4965_config_ap(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_vif *vif = ctx->vif; - int ret = 0; - - lockdep_assert_held(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* The following should be done only at AP bring up */ - if (!iwl_is_associated_ctx(ctx)) { - - /* RXON - unassoc (to set timing command) */ - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv, ctx); - - /* RXON Timing */ - ret = iwl_send_rxon_timing(priv, ctx); - if (ret) - IWL_WARN(priv, "RXON timing failed - " - "Attempting to continue.\n"); - - /* AP has all antennas */ - priv->chain_noise_data.active_chains = - priv->hw_params.valid_rx_ant; - iwl_set_rxon_ht(priv, &priv->current_ht_config); - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); - - ctx->staging.assoc_id = 0; - - if (vif->bss_conf.use_short_preamble) - ctx->staging.flags |= - RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= - ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { - if (vif->bss_conf.use_short_slot) - ctx->staging.flags |= - RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= - ~RXON_FLG_SHORT_SLOT_MSK; - } - /* need to send beacon cmd before committing assoc RXON! */ - iwlagn_send_beacon_cmd(priv); - /* restore RXON assoc */ - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv, ctx); - } - iwlagn_send_beacon_cmd(priv); - - /* FIXME - we need to add code here to detect a totally new - * configuration, reset the AP, unassoc, rxon timing, assoc, - * clear sta table, add BCAST sta... */ -} - -static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { - .get_hcmd_size = iwl4965_get_hcmd_size, - .build_addsta_hcmd = iwl4965_build_addsta_hcmd, - .chain_noise_reset = iwl4965_chain_noise_reset, - .gain_computation = iwl4965_gain_computation, - .tx_cmd_protection = iwl_legacy_tx_cmd_protection, - .calc_rssi = iwl4965_calc_rssi, - .request_scan = iwlagn_request_scan, - .post_scan = iwl4965_post_scan, -}; - -static struct iwl_lib_ops iwl4965_lib = { - .set_hw_params = iwl4965_hw_set_hw_params, - .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl, - .txq_set_sched = iwl4965_txq_set_sched, - .txq_agg_enable = iwl4965_txq_agg_enable, - .txq_agg_disable = iwl4965_txq_agg_disable, - .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd, - .txq_free_tfd = iwl_hw_txq_free_tfd, - .txq_init = iwl_hw_tx_queue_init, - .rx_handler_setup = iwl4965_rx_handler_setup, - .setup_deferred_work = iwl4965_setup_deferred_work, - .cancel_deferred_work = iwl4965_cancel_deferred_work, - .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, - .alive_notify = iwl4965_alive_notify, - .init_alive_start = iwl4965_init_alive_start, - .load_ucode = iwl4965_load_bsm, - .dump_nic_event_log = iwl_dump_nic_event_log, - .dump_nic_error_log = iwl_dump_nic_error_log, - .dump_fh = iwl_dump_fh, - .set_channel_switch = iwl4965_hw_channel_switch, - .apm_ops = { - .init = iwl_apm_init, - .config = iwl4965_nic_config, - }, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REGULATORY_BAND_1_CHANNELS, - EEPROM_REGULATORY_BAND_2_CHANNELS, - EEPROM_REGULATORY_BAND_3_CHANNELS, - EEPROM_REGULATORY_BAND_4_CHANNELS, - EEPROM_REGULATORY_BAND_5_CHANNELS, - EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS, - EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS - }, - .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, - .release_semaphore = iwlcore_eeprom_release_semaphore, - .calib_version = iwl4965_eeprom_calib_version, - .query_addr = iwlcore_eeprom_query_addr, - }, - .send_tx_power = iwl4965_send_tx_power, - .update_chain_flags = iwl_update_chain_flags, - .isr_ops = { - .isr = iwl_isr_legacy, - }, - .temp_ops = { - .temperature = iwl4965_temperature_calib, - }, - .debugfs_ops = { - .rx_stats_read = iwl_ucode_rx_stats_read, - .tx_stats_read = iwl_ucode_tx_stats_read, - .general_stats_read = iwl_ucode_general_stats_read, - .bt_stats_read = iwl_ucode_bt_stats_read, - .reply_tx_error = iwl_reply_tx_error_read, - }, - .check_plcp_health = iwl_good_plcp_health, -}; - -static const struct iwl_legacy_ops iwl4965_legacy_ops = { - .post_associate = iwl4965_post_associate, - .config_ap = iwl4965_config_ap, - .manage_ibss_station = iwlagn_manage_ibss_station, - .update_bcast_stations = iwl_update_bcast_stations, -}; - -struct ieee80211_ops iwl4965_hw_ops = { - .tx = iwlagn_mac_tx, - .start = iwlagn_mac_start, - .stop = iwlagn_mac_stop, - .add_interface = iwl_mac_add_interface, - .remove_interface = iwl_mac_remove_interface, - .change_interface = iwl_mac_change_interface, - .config = iwl_legacy_mac_config, - .configure_filter = iwlagn_configure_filter, - .set_key = iwlagn_mac_set_key, - .update_tkip_key = iwlagn_mac_update_tkip_key, - .conf_tx = iwl_mac_conf_tx, - .reset_tsf = iwl_legacy_mac_reset_tsf, - .bss_info_changed = iwl_legacy_mac_bss_info_changed, - .ampdu_action = iwlagn_mac_ampdu_action, - .hw_scan = iwl_mac_hw_scan, - .sta_add = iwlagn_mac_sta_add, - .sta_remove = iwl_mac_sta_remove, - .channel_switch = iwlagn_mac_channel_switch, - .flush = iwlagn_mac_flush, - .tx_last_beacon = iwl_mac_tx_last_beacon, -}; - -static const struct iwl_ops iwl4965_ops = { - .lib = &iwl4965_lib, - .hcmd = &iwl4965_hcmd, - .utils = &iwl4965_hcmd_utils, - .led = &iwlagn_led_ops, - .legacy = &iwl4965_legacy_ops, - .ieee80211_ops = &iwl4965_hw_ops, -}; - -static struct iwl_base_params iwl4965_base_params = { - .eeprom_size = IWL4965_EEPROM_IMG_SIZE, - .num_of_queues = IWL49_NUM_QUEUES, - .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES, - .pll_cfg_val = 0, - .set_l0s = true, - .use_bsm = true, - .use_isr_legacy = true, - .broken_powersave = true, - .led_compensation = 61, - .chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .wd_timeout = IWL_DEF_WD_TIMEOUT, - .temperature_kelvin = true, - .max_event_log_size = 512, - .tx_power_by_driver = true, - .ucode_tracing = true, - .sensitivity_calib_by_driver = true, - .chain_noise_calib_by_driver = true, - .no_agg_framecnt_info = true, -}; - -struct iwl_cfg iwl4965_agn_cfg = { - .name = "Intel(R) Wireless WiFi Link 4965AGN", - .fw_name_pre = IWL4965_FW_PRE, - .ucode_api_max = IWL4965_UCODE_API_MAX, - .ucode_api_min = IWL4965_UCODE_API_MIN, - .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, - .valid_tx_ant = ANT_AB, - .valid_rx_ant = ANT_ABC, - .eeprom_ver = EEPROM_4965_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION, - .ops = &iwl4965_ops, - .mod_params = &iwlagn_mod_params, - .base_params = &iwl4965_base_params, - .led_mode = IWL_LED_BLINK, - /* - * Force use of chains B and C for scan RX on 5 GHz band - * because the device has off-channel reception on chain A. - */ - .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC, -}; - -/* Module firmware */ -MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX)); - diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 9965215..d08fa93 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -86,7 +86,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); MODULE_LICENSE("GPL"); -MODULE_ALIAS("iwl4965"); static int iwlagn_ant_coupling; static bool iwlagn_bt_ch_announce = 1; @@ -3810,7 +3809,6 @@ static void iwlagn_bg_roc_done(struct work_struct *work) mutex_unlock(&priv->mutex); } -#ifdef CONFIG_IWL5000 static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw, struct ieee80211_channel *channel, enum nl80211_channel_type channel_type, @@ -3866,7 +3864,6 @@ static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw) return 0; } -#endif /***************************************************************************** * @@ -4036,7 +4033,6 @@ static void iwl_uninit_drv(struct iwl_priv *priv) kfree(priv->scan_cmd); } -#ifdef CONFIG_IWL5000 struct ieee80211_ops iwlagn_hw_ops = { .tx = iwlagn_mac_tx, .start = iwlagn_mac_start, @@ -4061,7 +4057,6 @@ struct ieee80211_ops iwlagn_hw_ops = { .remain_on_channel = iwl_mac_remain_on_channel, .cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel, }; -#endif static void iwl_hw_detect(struct iwl_priv *priv) { @@ -4129,12 +4124,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (cfg->mod_params->disable_hw_scan) { dev_printk(KERN_DEBUG, &(pdev->dev), "sw scan support is deprecated\n"); -#ifdef CONFIG_IWL5000 iwlagn_hw_ops.hw_scan = NULL; -#endif -#ifdef CONFIG_IWL4965 - iwl4965_hw_ops.hw_scan = NULL; -#endif } hw = iwl_alloc_all(cfg); @@ -4513,12 +4503,6 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev) /* Hardware specific file defines the PCI IDs table for that hardware module */ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { -#ifdef CONFIG_IWL4965 - {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, - {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, -#endif /* CONFIG_IWL4965 */ -#ifdef CONFIG_IWL5000 -/* 5100 Series WiFi */ {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */ {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */ {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */ @@ -4704,8 +4688,6 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)}, {IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)}, -#endif /* CONFIG_IWL5000 */ - {0} }; MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 977ddfb..4bd3420 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -43,11 +43,6 @@ #include "iwl-helpers.h" -MODULE_DESCRIPTION("iwl core"); -MODULE_VERSION(IWLWIFI_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); - /* * set bt_coex_active to true, uCode will do kill/defer * every time the priority line is asserted (BT is sending signals on the @@ -65,15 +60,12 @@ MODULE_LICENSE("GPL"); * default: bt_coex_active = true (BT_COEX_ENABLE) */ bool bt_coex_active = true; -EXPORT_SYMBOL_GPL(bt_coex_active); module_param(bt_coex_active, bool, S_IRUGO); MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist"); u32 iwl_debug_level; -EXPORT_SYMBOL(iwl_debug_level); const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; -EXPORT_SYMBOL(iwl_bcast_addr); /* This function both allocates and initializes hw and priv. */ @@ -98,7 +90,6 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg) out: return hw; } -EXPORT_SYMBOL(iwl_alloc_all); #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ @@ -272,7 +263,6 @@ int iwlcore_init_geos(struct iwl_priv *priv) return 0; } -EXPORT_SYMBOL(iwlcore_init_geos); /* * iwlcore_free_geos - undo allocations in iwlcore_init_geos @@ -283,7 +273,6 @@ void iwlcore_free_geos(struct iwl_priv *priv) kfree(priv->ieee_rates); clear_bit(STATUS_GEO_CONFIGURED, &priv->status); } -EXPORT_SYMBOL(iwlcore_free_geos); static bool iwl_is_channel_extension(struct iwl_priv *priv, enum ieee80211_band band, @@ -328,7 +317,6 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, le16_to_cpu(ctx->staging.channel), ctx->ht.extension_chan_offset); } -EXPORT_SYMBOL(iwl_is_ht40_tx_allowed); static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) { @@ -429,7 +417,6 @@ int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx) return iwl_send_cmd_pdu(priv, ctx->rxon_timing_cmd, sizeof(ctx->timing), &ctx->timing); } -EXPORT_SYMBOL(iwl_send_rxon_timing); void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx, int hw_decrypt) @@ -442,7 +429,6 @@ void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx, rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; } -EXPORT_SYMBOL(iwl_set_rxon_hwcrypto); /* validate RXON structure is valid */ int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx) @@ -515,7 +501,6 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx) } return 0; } -EXPORT_SYMBOL(iwl_check_rxon_cmd); /** * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed @@ -579,7 +564,6 @@ int iwl_full_rxon_required(struct iwl_priv *priv, return 0; } -EXPORT_SYMBOL(iwl_full_rxon_required); u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv, struct iwl_rxon_context *ctx) @@ -593,7 +577,6 @@ u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv, else return IWL_RATE_6M_PLCP; } -EXPORT_SYMBOL(iwl_rate_get_lowest_plcp); static void _iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf, @@ -670,7 +653,6 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf) for_each_context(priv, ctx) _iwl_set_rxon_ht(priv, ht_conf, ctx); } -EXPORT_SYMBOL(iwl_set_rxon_ht); /* Return valid, unused, channel for a passive scan to reset the RF */ u8 iwl_get_single_channel_number(struct iwl_priv *priv, @@ -711,7 +693,6 @@ u8 iwl_get_single_channel_number(struct iwl_priv *priv, return channel; } -EXPORT_SYMBOL(iwl_get_single_channel_number); /** * iwl_set_rxon_channel - Set the band and channel values in staging RXON @@ -742,7 +723,6 @@ int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, return 0; } -EXPORT_SYMBOL(iwl_set_rxon_channel); void iwl_set_flags_for_band(struct iwl_priv *priv, struct iwl_rxon_context *ctx, @@ -766,7 +746,6 @@ void iwl_set_flags_for_band(struct iwl_priv *priv, ctx->staging.flags &= ~RXON_FLG_CCK_MSK; } } -EXPORT_SYMBOL(iwl_set_flags_for_band); /* * initialize rxon structure with default values from eeprom @@ -838,7 +817,6 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv, ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff; ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff; } -EXPORT_SYMBOL(iwl_connection_init_rx_config); void iwl_set_rate(struct iwl_priv *priv) { @@ -871,7 +849,6 @@ void iwl_set_rate(struct iwl_priv *priv) (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; } } -EXPORT_SYMBOL(iwl_set_rate); void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) { @@ -891,7 +868,6 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) mutex_unlock(&priv->mutex); } } -EXPORT_SYMBOL(iwl_chswitch_done); void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { @@ -919,7 +895,6 @@ void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) } } } -EXPORT_SYMBOL(iwl_rx_csa); #ifdef CONFIG_IWLWIFI_DEBUG void iwl_print_rx_config_cmd(struct iwl_priv *priv, @@ -941,7 +916,6 @@ void iwl_print_rx_config_cmd(struct iwl_priv *priv, IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); } -EXPORT_SYMBOL(iwl_print_rx_config_cmd); #endif /** * iwl_irq_handle_error - called for HW or SW error interrupt from card @@ -1021,7 +995,6 @@ void iwl_irq_handle_error(struct iwl_priv *priv) queue_work(priv->workqueue, &priv->restart); } } -EXPORT_SYMBOL(iwl_irq_handle_error); static int iwl_apm_stop_master(struct iwl_priv *priv) { @@ -1058,7 +1031,6 @@ void iwl_apm_stop(struct iwl_priv *priv) */ iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); } -EXPORT_SYMBOL(iwl_apm_stop); /* @@ -1173,7 +1145,6 @@ int iwl_apm_init(struct iwl_priv *priv) out: return ret; } -EXPORT_SYMBOL(iwl_apm_init); int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) @@ -1233,7 +1204,6 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) } return ret; } -EXPORT_SYMBOL(iwl_set_tx_power); void iwl_send_bt_config(struct iwl_priv *priv) { @@ -1257,7 +1227,6 @@ void iwl_send_bt_config(struct iwl_priv *priv) sizeof(struct iwl_bt_cmd), &bt_cmd)) IWL_ERR(priv, "failed to send BT Coex Config\n"); } -EXPORT_SYMBOL(iwl_send_bt_config); int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear) { @@ -1275,7 +1244,6 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear) sizeof(struct iwl_statistics_cmd), &statistics_cmd); } -EXPORT_SYMBOL(iwl_send_statistics_request); void iwl_rx_pm_sleep_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) @@ -1287,7 +1255,6 @@ void iwl_rx_pm_sleep_notif(struct iwl_priv *priv, sleep->pm_sleep_mode, sleep->pm_wakeup_src); #endif } -EXPORT_SYMBOL(iwl_rx_pm_sleep_notif); void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) @@ -1299,7 +1266,6 @@ void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv, get_cmd_string(pkt->hdr.cmd)); iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len); } -EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif); void iwl_rx_reply_error(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) @@ -1314,7 +1280,6 @@ void iwl_rx_reply_error(struct iwl_priv *priv, le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), le32_to_cpu(pkt->u.err_resp.error_info)); } -EXPORT_SYMBOL(iwl_rx_reply_error); void iwl_clear_isr_stats(struct iwl_priv *priv) { @@ -1366,7 +1331,6 @@ int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, IWL_DEBUG_MAC80211(priv, "leave\n"); return 0; } -EXPORT_SYMBOL(iwl_mac_conf_tx); int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw) { @@ -1374,7 +1338,6 @@ int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw) return priv->ibss_manager == IWL_IBSS_MANAGER; } -EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon); static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx) { @@ -1484,7 +1447,6 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) IWL_DEBUG_MAC80211(priv, "leave\n"); return err; } -EXPORT_SYMBOL(iwl_mac_add_interface); static void iwl_teardown_interface(struct iwl_priv *priv, struct ieee80211_vif *vif, @@ -1537,7 +1499,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw, IWL_DEBUG_MAC80211(priv, "leave\n"); } -EXPORT_SYMBOL(iwl_mac_remove_interface); int iwl_alloc_txq_mem(struct iwl_priv *priv) { @@ -1552,14 +1513,12 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv) } return 0; } -EXPORT_SYMBOL(iwl_alloc_txq_mem); void iwl_free_txq_mem(struct iwl_priv *priv) { kfree(priv->txq); priv->txq = NULL; } -EXPORT_SYMBOL(iwl_free_txq_mem); #ifdef CONFIG_IWLWIFI_DEBUGFS @@ -1598,7 +1557,6 @@ int iwl_alloc_traffic_mem(struct iwl_priv *priv) iwl_reset_traffic_log(priv); return 0; } -EXPORT_SYMBOL(iwl_alloc_traffic_mem); void iwl_free_traffic_mem(struct iwl_priv *priv) { @@ -1608,7 +1566,6 @@ void iwl_free_traffic_mem(struct iwl_priv *priv) kfree(priv->rx_traffic); priv->rx_traffic = NULL; } -EXPORT_SYMBOL(iwl_free_traffic_mem); void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, u16 length, struct ieee80211_hdr *header) @@ -1633,7 +1590,6 @@ void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, (priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; } } -EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame); void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, u16 length, struct ieee80211_hdr *header) @@ -1658,7 +1614,6 @@ void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, (priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; } } -EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame); const char *get_mgmt_string(int cmd) { @@ -1795,7 +1750,6 @@ void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len) stats->data_bytes += len; } } -EXPORT_SYMBOL(iwl_update_stats); #endif static void iwl_force_rf_reset(struct iwl_priv *priv) @@ -1934,7 +1888,6 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, mutex_unlock(&priv->mutex); return err; } -EXPORT_SYMBOL(iwl_mac_change_interface); /* * On every watchdog tick we check (latest) time stamp. If it does not @@ -2006,7 +1959,6 @@ void iwl_bg_watchdog(unsigned long data) mod_timer(&priv->watchdog, jiffies + msecs_to_jiffies(IWL_WD_TICK(timeout))); } -EXPORT_SYMBOL(iwl_bg_watchdog); void iwl_setup_watchdog(struct iwl_priv *priv) { @@ -2018,7 +1970,6 @@ void iwl_setup_watchdog(struct iwl_priv *priv) else del_timer(&priv->watchdog); } -EXPORT_SYMBOL(iwl_setup_watchdog); /* * extended beacon time format @@ -2044,7 +1995,6 @@ u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval) return (quot << priv->hw_params.beacon_time_tsf_bits) + rem; } -EXPORT_SYMBOL(iwl_usecs_to_beacons); /* base is usually what we get from ucode with each received frame, * the same as HW timer counter counting down @@ -2072,7 +2022,6 @@ __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base, return cpu_to_le32(res); } -EXPORT_SYMBOL(iwl_add_beacon_time); #ifdef CONFIG_PM @@ -2092,7 +2041,6 @@ int iwl_pci_suspend(struct device *device) return 0; } -EXPORT_SYMBOL(iwl_pci_suspend); int iwl_pci_resume(struct device *device) { @@ -2121,7 +2069,6 @@ int iwl_pci_resume(struct device *device) return 0; } -EXPORT_SYMBOL(iwl_pci_resume); const struct dev_pm_ops iwl_pm_ops = { .suspend = iwl_pci_suspend, @@ -2131,6 +2078,5 @@ const struct dev_pm_ops iwl_pm_ops = { .poweroff = iwl_pci_suspend, .restore = iwl_pci_resume, }; -EXPORT_SYMBOL(iwl_pm_ops); #endif /* CONFIG_PM */ diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index bc7a965..8842411 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -1788,7 +1788,6 @@ err: iwl_dbgfs_unregister(priv); return -ENOMEM; } -EXPORT_SYMBOL(iwl_dbgfs_register); /** * Remove the debugfs files and directories @@ -1802,7 +1801,6 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv) debugfs_remove_recursive(priv->debugfs_dir); priv->debugfs_dir = NULL; } -EXPORT_SYMBOL(iwl_dbgfs_unregister); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 065615e..58165c7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -43,14 +43,14 @@ #include "iwl-prph.h" #include "iwl-fh.h" #include "iwl-debug.h" -#include "iwl-4965-hw.h" -#include "iwl-3945-hw.h" #include "iwl-agn-hw.h" #include "iwl-led.h" #include "iwl-power.h" #include "iwl-agn-rs.h" #include "iwl-agn-tt.h" +#define U32_PAD(n) ((4-(n))&0x3) + struct iwl_tx_queue; /* CT-KILL constants */ diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 358cfd7..833194a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -222,7 +222,6 @@ const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) BUG_ON(offset >= priv->cfg->base_params->eeprom_size); return &priv->eeprom[offset]; } -EXPORT_SYMBOL(iwlcore_eeprom_query_addr); static int iwl_init_otp_access(struct iwl_priv *priv) { @@ -382,7 +381,6 @@ const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) { return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset); } -EXPORT_SYMBOL(iwl_eeprom_query_addr); u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset) { @@ -390,7 +388,6 @@ u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset) return 0; return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8); } -EXPORT_SYMBOL(iwl_eeprom_query16); /** * iwl_eeprom_init - read EEPROM contents @@ -509,14 +506,12 @@ err: alloc_err: return ret; } -EXPORT_SYMBOL(iwl_eeprom_init); void iwl_eeprom_free(struct iwl_priv *priv) { kfree(priv->eeprom); priv->eeprom = NULL; } -EXPORT_SYMBOL(iwl_eeprom_free); static void iwl_init_band_reference(const struct iwl_priv *priv, int eep_band, int *eeprom_ch_count, @@ -779,7 +774,6 @@ int iwl_init_channel_map(struct iwl_priv *priv) return 0; } -EXPORT_SYMBOL(iwl_init_channel_map); /* * iwl_free_channel_map - undo allocations in iwl_init_channel_map @@ -789,7 +783,6 @@ void iwl_free_channel_map(struct iwl_priv *priv) kfree(priv->channel_info); priv->channel_count = 0; } -EXPORT_SYMBOL(iwl_free_channel_map); /** * iwl_get_channel_info - Find driver's private channel info @@ -818,4 +811,3 @@ const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv, return NULL; } -EXPORT_SYMBOL(iwl_get_channel_info); diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index e4b953d..02499f6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -114,7 +114,6 @@ const char *get_cmd_string(u8 cmd) } } -EXPORT_SYMBOL(get_cmd_string); #define HOST_COMPLETE_TIMEOUT (HZ / 2) @@ -253,7 +252,6 @@ out: mutex_unlock(&priv->sync_cmd_mutex); return ret; } -EXPORT_SYMBOL(iwl_send_cmd_sync); int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) { @@ -262,7 +260,6 @@ int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) return iwl_send_cmd_sync(priv, cmd); } -EXPORT_SYMBOL(iwl_send_cmd); int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data) { @@ -274,7 +271,6 @@ int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data) return iwl_send_cmd_sync(priv, &cmd); } -EXPORT_SYMBOL(iwl_send_cmd_pdu); int iwl_send_cmd_pdu_async(struct iwl_priv *priv, u8 id, u16 len, const void *data, @@ -293,4 +289,3 @@ int iwl_send_cmd_pdu_async(struct iwl_priv *priv, return iwl_send_cmd_async(priv, &cmd); } -EXPORT_SYMBOL(iwl_send_cmd_pdu_async); diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 074ad22..d7f2a0b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -175,7 +175,6 @@ void iwl_leds_init(struct iwl_priv *priv) priv->led_registered = true; } -EXPORT_SYMBOL(iwl_leds_init); void iwl_leds_exit(struct iwl_priv *priv) { @@ -185,4 +184,3 @@ void iwl_leds_exit(struct iwl_priv *priv) led_classdev_unregister(&priv->led); kfree(priv->led.name); } -EXPORT_SYMBOL(iwl_leds_exit); diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c deleted file mode 100644 index e1ace3c..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-legacy.c +++ /dev/null @@ -1,657 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - -#include -#include - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-helpers.h" -#include "iwl-legacy.h" - -static void iwl_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (!ctx->is_active) - return; - - ctx->qos_data.def_qos_parm.qos_flags = 0; - - if (ctx->qos_data.qos_active) - ctx->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_UPDATE_EDCA_MSK; - - if (ctx->ht.enabled) - ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; - - IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n", - ctx->qos_data.qos_active, - ctx->qos_data.def_qos_parm.qos_flags); - - iwl_send_cmd_pdu_async(priv, ctx->qos_cmd, - sizeof(struct iwl_qosparam_cmd), - &ctx->qos_data.def_qos_parm, NULL); -} - -/** - * iwl_legacy_mac_config - mac80211 config callback - */ -int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed) -{ - struct iwl_priv *priv = hw->priv; - const struct iwl_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = conf->channel; - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - struct iwl_rxon_context *ctx; - unsigned long flags = 0; - int ret = 0; - u16 ch; - int scan_active = 0; - bool ht_changed[NUM_IWL_RXON_CTX] = {}; - - if (WARN_ON(!priv->cfg->ops->legacy)) - return -EOPNOTSUPP; - - mutex_lock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n", - channel->hw_value, changed); - - if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) { - scan_active = 1; - IWL_DEBUG_MAC80211(priv, "scan active\n"); - } - - if (changed & (IEEE80211_CONF_CHANGE_SMPS | - IEEE80211_CONF_CHANGE_CHANNEL)) { - /* mac80211 uses static for non-HT which is what we want */ - priv->current_ht_config.smps = conf->smps_mode; - - /* - * Recalculate chain counts. - * - * If monitor mode is enabled then mac80211 will - * set up the SM PS mode to OFF if an HT channel is - * configured. - */ - if (priv->cfg->ops->hcmd->set_rxon_chain) - for_each_context(priv, ctx) - priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); - } - - /* during scanning mac80211 will delay channel setting until - * scan finish with changed = 0 - */ - if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) { - if (scan_active) - goto set_ch_out; - - ch = channel->hw_value; - ch_info = iwl_get_channel_info(priv, channel->band, ch); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); - ret = -EINVAL; - goto set_ch_out; - } - - spin_lock_irqsave(&priv->lock, flags); - - for_each_context(priv, ctx) { - /* Configure HT40 channels */ - if (ctx->ht.enabled != conf_is_ht(conf)) { - ctx->ht.enabled = conf_is_ht(conf); - ht_changed[ctx->ctxid] = true; - } - if (ctx->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } - } else - ctx->ht.is_40mhz = false; - - /* - * Default to no protection. Protection mode will - * later be set from BSS config in iwl_ht_conf - */ - ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; - - /* if we are switching from ht to 2.4 clear flags - * from any ht related info since 2.4 does not - * support ht */ - if ((le16_to_cpu(ctx->staging.channel) != ch)) - ctx->staging.flags = 0; - - iwl_set_rxon_channel(priv, channel, ctx); - iwl_set_rxon_ht(priv, ht_conf); - - iwl_set_flags_for_band(priv, ctx, channel->band, - ctx->vif); - } - - spin_unlock_irqrestore(&priv->lock, flags); - - if (priv->cfg->ops->legacy->update_bcast_stations) - ret = priv->cfg->ops->legacy->update_bcast_stations(priv); - - set_ch_out: - /* The list of supported rates and rate mask can be different - * for each band; since the band may have changed, reset - * the rate mask to what mac80211 lists */ - iwl_set_rate(priv); - } - - if (changed & (IEEE80211_CONF_CHANGE_PS | - IEEE80211_CONF_CHANGE_IDLE)) { - ret = iwl_power_update_mode(priv, false); - if (ret) - IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n"); - } - - if (changed & IEEE80211_CONF_CHANGE_POWER) { - IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", - priv->tx_power_user_lmt, conf->power_level); - - iwl_set_tx_power(priv, conf->power_level, false); - } - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - goto out; - } - - if (scan_active) - goto out; - - for_each_context(priv, ctx) { - if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging))) - iwlcore_commit_rxon(priv, ctx); - else - IWL_DEBUG_INFO(priv, - "Not re-sending same RXON configuration.\n"); - if (ht_changed[ctx->ctxid]) - iwl_update_qos(priv, ctx); - } - -out: - IWL_DEBUG_MAC80211(priv, "leave\n"); - mutex_unlock(&priv->mutex); - return ret; -} -EXPORT_SYMBOL(iwl_legacy_mac_config); - -void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - /* IBSS can only be the IWL_RXON_CTX_BSS context */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (WARN_ON(!priv->cfg->ops->legacy)) - return; - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "enter\n"); - - spin_lock_irqsave(&priv->lock, flags); - memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config)); - spin_unlock_irqrestore(&priv->lock, flags); - - spin_lock_irqsave(&priv->lock, flags); - - /* new association get rid of ibss beacon skb */ - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = NULL; - - priv->timestamp = 0; - - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_scan_cancel_timeout(priv, 100); - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - mutex_unlock(&priv->mutex); - return; - } - - /* we are restarting association process - * clear RXON_FILTER_ASSOC_MSK bit - */ - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwlcore_commit_rxon(priv, ctx); - - iwl_set_rate(priv); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} -EXPORT_SYMBOL(iwl_legacy_mac_reset_tsf); - -static void iwl_ht_conf(struct iwl_priv *priv, - struct ieee80211_vif *vif) -{ - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - struct ieee80211_sta *sta; - struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - - IWL_DEBUG_ASSOC(priv, "enter:\n"); - - if (!ctx->ht.enabled) - return; - - ctx->ht.protection = - bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION; - ctx->ht.non_gf_sta_present = - !!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); - - ht_conf->single_chain_sufficient = false; - - switch (vif->type) { - case NL80211_IFTYPE_STATION: - rcu_read_lock(); - sta = ieee80211_find_sta(vif, bss_conf->bssid); - if (sta) { - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - int maxstreams; - - maxstreams = (ht_cap->mcs.tx_params & - IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK) - >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; - maxstreams += 1; - - if ((ht_cap->mcs.rx_mask[1] == 0) && - (ht_cap->mcs.rx_mask[2] == 0)) - ht_conf->single_chain_sufficient = true; - if (maxstreams <= 1) - ht_conf->single_chain_sufficient = true; - } else { - /* - * If at all, this can only happen through a race - * when the AP disconnects us while we're still - * setting up the connection, in that case mac80211 - * will soon tell us about that. - */ - ht_conf->single_chain_sufficient = true; - } - rcu_read_unlock(); - break; - case NL80211_IFTYPE_ADHOC: - ht_conf->single_chain_sufficient = true; - break; - default: - break; - } - - IWL_DEBUG_ASSOC(priv, "leave\n"); -} - -static inline void iwl_set_no_assoc(struct iwl_priv *priv, - struct ieee80211_vif *vif) -{ - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - - /* - * inform the ucode that there is no longer an - * association and that no more packets should be - * sent - */ - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - ctx->staging.assoc_id = 0; - iwlcore_commit_rxon(priv, ctx); -} - -static void iwlcore_beacon_update(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct iwl_priv *priv = hw->priv; - unsigned long flags; - __le64 timestamp; - struct sk_buff *skb = ieee80211_beacon_get(hw, vif); - - if (!skb) - return; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - lockdep_assert_held(&priv->mutex); - - if (!priv->beacon_ctx) { - IWL_ERR(priv, "update beacon but no beacon context!\n"); - dev_kfree_skb(skb); - return; - } - - spin_lock_irqsave(&priv->lock, flags); - - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = skb; - - timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; - priv->timestamp = le64_to_cpu(timestamp); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - spin_unlock_irqrestore(&priv->lock, flags); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); - return; - } - - priv->cfg->ops->legacy->post_associate(priv); -} - -void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct iwl_priv *priv = hw->priv; - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - int ret; - - if (WARN_ON(!priv->cfg->ops->legacy)) - return; - - IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes); - - if (!iwl_is_alive(priv)) - return; - - mutex_lock(&priv->mutex); - - if (changes & BSS_CHANGED_QOS) { - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - ctx->qos_data.qos_active = bss_conf->qos; - iwl_update_qos(priv, ctx); - spin_unlock_irqrestore(&priv->lock, flags); - } - - if (changes & BSS_CHANGED_BEACON_ENABLED) { - /* - * the add_interface code must make sure we only ever - * have a single interface that could be beaconing at - * any time. - */ - if (vif->bss_conf.enable_beacon) - priv->beacon_ctx = ctx; - else - priv->beacon_ctx = NULL; - } - - if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) { - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = ieee80211_beacon_get(hw, vif); - } - - if (changes & BSS_CHANGED_BEACON_INT && vif->type == NL80211_IFTYPE_AP) - iwl_send_rxon_timing(priv, ctx); - - if (changes & BSS_CHANGED_BSSID) { - IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid); - - /* - * If there is currently a HW scan going on in the - * background then we need to cancel it else the RXON - * below/in post_associate will fail. - */ - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - mutex_unlock(&priv->mutex); - return; - } - - /* mac80211 only sets assoc when in STATION mode */ - if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) { - memcpy(ctx->staging.bssid_addr, - bss_conf->bssid, ETH_ALEN); - - /* currently needed in a few places */ - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); - } else { - ctx->staging.filter_flags &= - ~RXON_FILTER_ASSOC_MSK; - } - - } - - /* - * This needs to be after setting the BSSID in case - * mac80211 decides to do both changes at once because - * it will invoke post_associate. - */ - if (vif->type == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON) - iwlcore_beacon_update(hw, vif); - - if (changes & BSS_CHANGED_ERP_PREAMBLE) { - IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n", - bss_conf->use_short_preamble); - if (bss_conf->use_short_preamble) - ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - } - - if (changes & BSS_CHANGED_ERP_CTS_PROT) { - IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot); - if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) - ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK; - else - ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK; - if (bss_conf->use_cts_prot) - ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; - else - ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN; - } - - if (changes & BSS_CHANGED_BASIC_RATES) { - /* XXX use this information - * - * To do that, remove code from iwl_set_rate() and put something - * like this here: - * - if (A-band) - ctx->staging.ofdm_basic_rates = - bss_conf->basic_rates; - else - ctx->staging.ofdm_basic_rates = - bss_conf->basic_rates >> 4; - ctx->staging.cck_basic_rates = - bss_conf->basic_rates & 0xF; - */ - } - - if (changes & BSS_CHANGED_HT) { - iwl_ht_conf(priv, vif); - - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); - } - - if (changes & BSS_CHANGED_ASSOC) { - IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc); - if (bss_conf->assoc) { - priv->timestamp = bss_conf->timestamp; - - if (!iwl_is_rfkill(priv)) - priv->cfg->ops->legacy->post_associate(priv); - } else - iwl_set_no_assoc(priv, vif); - } - - if (changes && iwl_is_associated_ctx(ctx) && bss_conf->aid) { - IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n", - changes); - ret = iwl_send_rxon_assoc(priv, ctx); - if (!ret) { - /* Sync active_rxon with latest change. */ - memcpy((void *)&ctx->active, - &ctx->staging, - sizeof(struct iwl_rxon_cmd)); - } - } - - if (changes & BSS_CHANGED_BEACON_ENABLED) { - if (vif->bss_conf.enable_beacon) { - memcpy(ctx->staging.bssid_addr, - bss_conf->bssid, ETH_ALEN); - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); - priv->cfg->ops->legacy->config_ap(priv); - } else - iwl_set_no_assoc(priv, vif); - } - - if (changes & BSS_CHANGED_IBSS) { - ret = priv->cfg->ops->legacy->manage_ibss_station(priv, vif, - bss_conf->ibss_joined); - if (ret) - IWL_ERR(priv, "failed to %s IBSS station %pM\n", - bss_conf->ibss_joined ? "add" : "remove", - bss_conf->bssid); - } - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} -EXPORT_SYMBOL(iwl_legacy_mac_bss_info_changed); - -irqreturn_t iwl_isr_legacy(int irq, void *data) -{ - struct iwl_priv *priv = data; - u32 inta, inta_mask; - u32 inta_fh; - unsigned long flags; - if (!priv) - return IRQ_NONE; - - spin_lock_irqsave(&priv->lock, flags); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */ - iwl_write32(priv, CSR_INT_MASK, 0x00000000); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(priv, CSR_INT); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta && !inta_fh) { - IWL_DEBUG_ISR(priv, - "Ignore interrupt, inta == 0, inta_fh == 0\n"); - goto none; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta); - goto unplugged; - } - - IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - - inta &= ~CSR_INT_BIT_SCD; - - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta || inta_fh)) - tasklet_schedule(&priv->irq_tasklet); - -unplugged: - spin_unlock_irqrestore(&priv->lock, flags); - return IRQ_HANDLED; - -none: - /* re-enable interrupts here since we don't have anything to service. */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl_enable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - return IRQ_NONE; -} -EXPORT_SYMBOL(iwl_isr_legacy); - -/* - * iwl_legacy_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this - * function. - */ -void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - __le16 fc, __le32 *tx_flags) -{ - if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { - *tx_flags |= TX_CMD_FLG_RTS_MSK; - *tx_flags &= ~TX_CMD_FLG_CTS_MSK; - *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; - - if (!ieee80211_is_mgmt(fc)) - return; - - switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { - case cpu_to_le16(IEEE80211_STYPE_AUTH): - case cpu_to_le16(IEEE80211_STYPE_DEAUTH): - case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): - case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): - *tx_flags &= ~TX_CMD_FLG_RTS_MSK; - *tx_flags |= TX_CMD_FLG_CTS_MSK; - break; - } - } else if (info->control.rates[0].flags & - IEEE80211_TX_RC_USE_CTS_PROTECT) { - *tx_flags &= ~TX_CMD_FLG_RTS_MSK; - *tx_flags |= TX_CMD_FLG_CTS_MSK; - *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK; - } -} -EXPORT_SYMBOL(iwl_legacy_tx_cmd_protection); diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.h b/drivers/net/wireless/iwlwifi/iwl-legacy.h deleted file mode 100644 index 9f7b2f9..0000000 --- a/drivers/net/wireless/iwlwifi/iwl-legacy.h +++ /dev/null @@ -1,79 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_legacy_h__ -#define __iwl_legacy_h__ - -/* mac80211 handlers */ -int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed); -void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw); -void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes); -void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - __le16 fc, __le32 *tx_flags); - -irqreturn_t iwl_isr_legacy(int irq, void *data); - -#endif /* __iwl_legacy_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index 1d1bf32..576795e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -425,7 +425,6 @@ int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, return ret; } -EXPORT_SYMBOL(iwl_power_set_mode); int iwl_power_update_mode(struct iwl_priv *priv, bool force) { @@ -434,7 +433,6 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force) iwl_power_build_cmd(priv, &cmd); return iwl_power_set_mode(priv, &cmd, force); } -EXPORT_SYMBOL(iwl_power_update_mode); /* initialize to default */ void iwl_power_initialize(struct iwl_priv *priv) @@ -448,4 +446,3 @@ void iwl_power_initialize(struct iwl_priv *priv) memset(&priv->power_data.sleep_cmd, 0, sizeof(priv->power_data.sleep_cmd)); } -EXPORT_SYMBOL(iwl_power_initialize); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index bc89393..a21f6fe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -118,7 +118,6 @@ int iwl_rx_queue_space(const struct iwl_rx_queue *q) s = 0; return s; } -EXPORT_SYMBOL(iwl_rx_queue_space); /** * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue @@ -170,7 +169,6 @@ void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q exit_unlock: spin_unlock_irqrestore(&q->lock, flags); } -EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr); int iwl_rx_queue_alloc(struct iwl_priv *priv) { @@ -211,7 +209,6 @@ err_rb: err_bd: return -ENOMEM; } -EXPORT_SYMBOL(iwl_rx_queue_alloc); void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv, @@ -229,7 +226,6 @@ void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv, memcpy(&priv->measure_report, report, sizeof(*report)); priv->measurement_status |= MEASUREMENT_READY; } -EXPORT_SYMBOL(iwl_rx_spectrum_measure_notif); void iwl_recover_from_statistics(struct iwl_priv *priv, struct iwl_rx_packet *pkt) @@ -249,7 +245,6 @@ void iwl_recover_from_statistics(struct iwl_priv *priv, !priv->cfg->ops->lib->check_plcp_health(priv, pkt)) iwl_force_reset(priv, IWL_RF_RESET, false); } -EXPORT_SYMBOL(iwl_recover_from_statistics); /* * returns non-zero if packet should be dropped @@ -302,4 +297,3 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv, } return 0; } -EXPORT_SYMBOL(iwl_set_decrypted_flag); diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 08f1bea..faa6d34 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -155,7 +155,6 @@ int iwl_scan_cancel(struct iwl_priv *priv) queue_work(priv->workqueue, &priv->abort_scan); return 0; } -EXPORT_SYMBOL(iwl_scan_cancel); /** * iwl_scan_cancel_timeout - Cancel any currently executing HW scan @@ -180,7 +179,6 @@ int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) return test_bit(STATUS_SCAN_HW, &priv->status); } -EXPORT_SYMBOL(iwl_scan_cancel_timeout); /* Service response to REPLY_SCAN_CMD (0x80) */ static void iwl_rx_reply_scan(struct iwl_priv *priv, @@ -288,7 +286,6 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = iwl_rx_scan_complete_notif; } -EXPORT_SYMBOL(iwl_setup_rx_scan_handlers); inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv, enum ieee80211_band band, @@ -301,7 +298,6 @@ inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv, return IWL_ACTIVE_DWELL_TIME_24 + IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); } -EXPORT_SYMBOL(iwl_get_active_dwell_time); u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, enum ieee80211_band band, @@ -333,7 +329,6 @@ u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, return passive; } -EXPORT_SYMBOL(iwl_get_passive_dwell_time); void iwl_init_scan_params(struct iwl_priv *priv) { @@ -343,7 +338,6 @@ void iwl_init_scan_params(struct iwl_priv *priv) if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx; } -EXPORT_SYMBOL(iwl_init_scan_params); static int __must_check iwl_scan_initiate(struct iwl_priv *priv, struct ieee80211_vif *vif, @@ -439,7 +433,6 @@ out_unlock: return ret; } -EXPORT_SYMBOL(iwl_mac_hw_scan); /* * internal short scan, this function should only been called while associated. @@ -536,7 +529,6 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame, return (u16)len; } -EXPORT_SYMBOL(iwl_fill_probe_req); static void iwl_bg_abort_scan(struct work_struct *work) { @@ -621,7 +613,6 @@ void iwl_setup_scan_deferred_work(struct iwl_priv *priv) INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan); INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); } -EXPORT_SYMBOL(iwl_setup_scan_deferred_work); void iwl_cancel_scan_deferred_work(struct iwl_priv *priv) { @@ -635,4 +626,3 @@ void iwl_cancel_scan_deferred_work(struct iwl_priv *priv) mutex_unlock(&priv->mutex); } } -EXPORT_SYMBOL(iwl_cancel_scan_deferred_work); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 49493d1..bc90a12 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -169,7 +169,6 @@ int iwl_send_add_sta(struct iwl_priv *priv, return ret; } -EXPORT_SYMBOL(iwl_send_add_sta); static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, struct ieee80211_sta *sta, @@ -316,7 +315,6 @@ u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx, return sta_id; } -EXPORT_SYMBOL_GPL(iwl_prep_station); #define STA_WAIT_TIMEOUT (HZ/2) @@ -379,7 +377,6 @@ int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx, *sta_id_r = sta_id; return ret; } -EXPORT_SYMBOL(iwl_add_station_common); /** * iwl_sta_ucode_deactivate - deactivate ucode status for a station @@ -513,7 +510,6 @@ out_err: spin_unlock_irqrestore(&priv->sta_lock, flags); return -EINVAL; } -EXPORT_SYMBOL_GPL(iwl_remove_station); /** * iwl_clear_ucode_stations - clear ucode station table bits @@ -548,7 +544,6 @@ void iwl_clear_ucode_stations(struct iwl_priv *priv, if (!cleared) IWL_DEBUG_INFO(priv, "No active stations found to be cleared\n"); } -EXPORT_SYMBOL(iwl_clear_ucode_stations); /** * iwl_restore_stations() - Restore driver known stations to device @@ -625,7 +620,6 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx) else IWL_DEBUG_INFO(priv, "Restoring all known stations .... complete.\n"); } -EXPORT_SYMBOL(iwl_restore_stations); void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx) { @@ -668,7 +662,6 @@ void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx) priv->stations[sta_id].sta.sta.addr, ret); iwl_send_lq_cmd(priv, ctx, &lq, CMD_SYNC, true); } -EXPORT_SYMBOL(iwl_reprogram_ap_sta); int iwl_get_free_ucode_key_index(struct iwl_priv *priv) { @@ -680,7 +673,6 @@ int iwl_get_free_ucode_key_index(struct iwl_priv *priv) return WEP_INVALID_OFFSET; } -EXPORT_SYMBOL(iwl_get_free_ucode_key_index); void iwl_dealloc_bcast_stations(struct iwl_priv *priv) { @@ -700,7 +692,6 @@ void iwl_dealloc_bcast_stations(struct iwl_priv *priv) } spin_unlock_irqrestore(&priv->sta_lock, flags); } -EXPORT_SYMBOL_GPL(iwl_dealloc_bcast_stations); #ifdef CONFIG_IWLWIFI_DEBUG static void iwl_dump_lq_cmd(struct iwl_priv *priv, @@ -810,7 +801,6 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx, } return ret; } -EXPORT_SYMBOL(iwl_send_lq_cmd); int iwl_mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -832,4 +822,3 @@ int iwl_mac_sta_remove(struct ieee80211_hw *hw, mutex_unlock(&priv->mutex); return ret; } -EXPORT_SYMBOL(iwl_mac_sta_remove); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 073b6ce..7e607d3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -84,7 +84,6 @@ void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq) } txq->need_update = 0; } -EXPORT_SYMBOL(iwl_txq_update_write_ptr); /** * iwl_tx_queue_free - Deallocate DMA queue. @@ -131,7 +130,6 @@ void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id) /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); } -EXPORT_SYMBOL(iwl_tx_queue_free); /** * iwl_cmd_queue_free - Deallocate DMA queue. @@ -193,7 +191,6 @@ void iwl_cmd_queue_free(struct iwl_priv *priv) /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); } -EXPORT_SYMBOL(iwl_cmd_queue_free); /*************** DMA-QUEUE-GENERAL-FUNCTIONS ***** * DMA services @@ -233,7 +230,6 @@ int iwl_queue_space(const struct iwl_queue *q) s = 0; return s; } -EXPORT_SYMBOL(iwl_queue_space); /** @@ -384,7 +380,6 @@ out_free_arrays: return -ENOMEM; } -EXPORT_SYMBOL(iwl_tx_queue_init); void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) @@ -404,7 +399,6 @@ void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq, /* Tell device where to find queue */ priv->cfg->ops->lib->txq_init(priv, txq); } -EXPORT_SYMBOL(iwl_tx_queue_reset); /*************** HOST COMMAND QUEUE FUNCTIONS *****/ @@ -641,4 +635,3 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) } meta->flags = 0; } -EXPORT_SYMBOL(iwl_tx_cmd_complete); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c deleted file mode 100644 index adcef73..0000000 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ /dev/null @@ -1,4334 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#define DRV_NAME "iwl3945" - -#include "iwl-fh.h" -#include "iwl-3945-fh.h" -#include "iwl-commands.h" -#include "iwl-sta.h" -#include "iwl-3945.h" -#include "iwl-core.h" -#include "iwl-helpers.h" -#include "iwl-dev.h" -#include "iwl-spectrum.h" -#include "iwl-legacy.h" - -/* - * module name, copyright, version, etc. - */ - -#define DRV_DESCRIPTION \ -"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -/* - * add "s" to indicate spectrum measurement included. - * we add it here to be consistent with previous releases in which - * this was configurable. - */ -#define DRV_VERSION IWLWIFI_VERSION VD "s" -#define DRV_COPYRIGHT "Copyright(c) 2003-2010 Intel Corporation" -#define DRV_AUTHOR "" - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); - - /* module parameters */ -struct iwl_mod_params iwl3945_mod_params = { - .sw_crypto = 1, - .restart_fw = 1, - /* the rest are 0 by default */ -}; - -/** - * iwl3945_get_antenna_flags - Get antenna flags for RXON command - * @priv: eeprom and antenna fields are used to determine antenna flags - * - * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed - * iwl3945_mod_params.antenna specifies the antenna diversity mode: - * - * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself - * IWL_ANTENNA_MAIN - Force MAIN antenna - * IWL_ANTENNA_AUX - Force AUX antenna - */ -__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv) -{ - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - - switch (iwl3945_mod_params.antenna) { - case IWL_ANTENNA_DIVERSITY: - return 0; - - case IWL_ANTENNA_MAIN: - if (eeprom->antenna_switch_type) - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; - - case IWL_ANTENNA_AUX: - if (eeprom->antenna_switch_type) - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; - return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; - } - - /* bad antenna selector value */ - IWL_ERR(priv, "Bad antenna selector value (0x%x)\n", - iwl3945_mod_params.antenna); - - return 0; /* "diversity" is default if error */ -} - -static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, - u8 sta_id) -{ - unsigned long flags; - __le16 key_flags = 0; - int ret; - - key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - - if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - keyconf->hw_key_idx = keyconf->keyidx; - key_flags &= ~STA_KEY_FLG_INVALID; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].keyinfo.cipher = keyconf->cipher; - priv->stations[sta_id].keyinfo.keylen = keyconf->keylen; - memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, - keyconf->keylen); - - memcpy(priv->stations[sta_id].sta.key.key, keyconf->key, - keyconf->keylen); - - if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) - == STA_KEY_FLG_NO_ENC) - priv->stations[sta_id].sta.key.key_offset = - iwl_get_free_ucode_key_index(priv); - /* else, we are overriding an existing key => no need to allocated room - * in uCode. */ - - WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, - "no space for a new key"); - - priv->stations[sta_id].sta.key.key_flags = key_flags; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n"); - - ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); - - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return ret; -} - -static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, - u8 sta_id) -{ - return -EOPNOTSUPP; -} - -static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, - u8 sta_id) -{ - return -EOPNOTSUPP; -} - -static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id) -{ - unsigned long flags; - struct iwl_addsta_cmd sta_cmd; - - spin_lock_irqsave(&priv->sta_lock, flags); - memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key)); - memset(&priv->stations[sta_id].sta.key, 0, - sizeof(struct iwl4965_keyinfo)); - priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); - spin_unlock_irqrestore(&priv->sta_lock, flags); - - IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n"); - return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); -} - -static int iwl3945_set_dynamic_key(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, u8 sta_id) -{ - int ret = 0; - - keyconf->hw_key_idx = HW_KEY_DYNAMIC; - - switch (keyconf->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id); - break; - case WLAN_CIPHER_SUITE_TKIP: - ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id); - break; - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id); - break; - default: - IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__, - keyconf->cipher); - ret = -EINVAL; - } - - IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n", - keyconf->cipher, keyconf->keylen, keyconf->keyidx, - sta_id, ret); - - return ret; -} - -static int iwl3945_remove_static_key(struct iwl_priv *priv) -{ - int ret = -EOPNOTSUPP; - - return ret; -} - -static int iwl3945_set_static_key(struct iwl_priv *priv, - struct ieee80211_key_conf *key) -{ - if (key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) - return -EOPNOTSUPP; - - IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher); - return -EINVAL; -} - -static void iwl3945_clear_free_frames(struct iwl_priv *priv) -{ - struct list_head *element; - - IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n", - priv->frames_count); - - while (!list_empty(&priv->free_frames)) { - element = priv->free_frames.next; - list_del(element); - kfree(list_entry(element, struct iwl3945_frame, list)); - priv->frames_count--; - } - - if (priv->frames_count) { - IWL_WARN(priv, "%d frames still in use. Did we lose one?\n", - priv->frames_count); - priv->frames_count = 0; - } -} - -static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv) -{ - struct iwl3945_frame *frame; - struct list_head *element; - if (list_empty(&priv->free_frames)) { - frame = kzalloc(sizeof(*frame), GFP_KERNEL); - if (!frame) { - IWL_ERR(priv, "Could not allocate frame!\n"); - return NULL; - } - - priv->frames_count++; - return frame; - } - - element = priv->free_frames.next; - list_del(element); - return list_entry(element, struct iwl3945_frame, list); -} - -static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame) -{ - memset(frame, 0, sizeof(*frame)); - list_add(&frame->list, &priv->free_frames); -} - -unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - int left) -{ - - if (!iwl_is_associated(priv, IWL_RXON_CTX_BSS) || !priv->beacon_skb) - return 0; - - if (priv->beacon_skb->len > left) - return 0; - - memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len); - - return priv->beacon_skb->len; -} - -static int iwl3945_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl3945_frame *frame; - unsigned int frame_size; - int rc; - u8 rate; - - frame = iwl3945_get_free_frame(priv); - - if (!frame) { - IWL_ERR(priv, "Could not obtain free frame buffer for beacon " - "command.\n"); - return -ENOMEM; - } - - rate = iwl_rate_get_lowest_plcp(priv, - &priv->contexts[IWL_RXON_CTX_BSS]); - - frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate); - - rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size, - &frame->u.cmd[0]); - - iwl3945_free_frame(priv, frame); - - return rc; -} - -static void iwl3945_unset_hw_params(struct iwl_priv *priv) -{ - if (priv->_3945.shared_virt) - dma_free_coherent(&priv->pci_dev->dev, - sizeof(struct iwl3945_shared), - priv->_3945.shared_virt, - priv->_3945.shared_phys); -} - -static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - struct iwl_device_cmd *cmd, - struct sk_buff *skb_frag, - int sta_id) -{ - struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; - struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo; - - tx_cmd->sec_ctl = 0; - - switch (keyinfo->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - tx_cmd->sec_ctl = TX_CMD_SEC_CCM; - memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen); - IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); - break; - - case WLAN_CIPHER_SUITE_TKIP: - break; - - case WLAN_CIPHER_SUITE_WEP104: - tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; - /* fall through */ - case WLAN_CIPHER_SUITE_WEP40: - tx_cmd->sec_ctl |= TX_CMD_SEC_WEP | - (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT; - - memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen); - - IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption " - "with key %d\n", info->control.hw_key->hw_key_idx); - break; - - default: - IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher); - break; - } -} - -/* - * handle build REPLY_TX command notification. - */ -static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv, - struct iwl_device_cmd *cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, u8 std_id) -{ - struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload; - __le32 tx_flags = tx_cmd->tx_flags; - __le16 fc = hdr->frame_control; - - tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - tx_flags |= TX_CMD_FLG_ACK_MSK; - if (ieee80211_is_mgmt(fc)) - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - if (ieee80211_is_probe_resp(fc) && - !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) - tx_flags |= TX_CMD_FLG_TSF_MSK; - } else { - tx_flags &= (~TX_CMD_FLG_ACK_MSK); - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - } - - tx_cmd->sta_id = std_id; - if (ieee80211_has_morefrags(fc)) - tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tx_cmd->tid_tspec = qc[0] & 0xf; - tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; - } else { - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - } - - priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags); - - tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); - if (ieee80211_is_mgmt(fc)) { - if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); - else - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); - } else { - tx_cmd->timeout.pm_frame_timeout = 0; - } - - tx_cmd->driver_txop = 0; - tx_cmd->tx_flags = tx_flags; - tx_cmd->next_frame_len = 0; -} - -/* - * start REPLY_TX command process - */ -static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl3945_tx_cmd *tx_cmd; - struct iwl_tx_queue *txq = NULL; - struct iwl_queue *q = NULL; - struct iwl_device_cmd *out_cmd; - struct iwl_cmd_meta *out_meta; - dma_addr_t phys_addr; - dma_addr_t txcmd_phys; - int txq_id = skb_get_queue_mapping(skb); - u16 len, idx, hdr_len; - u8 id; - u8 unicast; - u8 sta_id; - u8 tid = 0; - __le16 fc; - u8 wait_write_ptr = 0; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n"); - goto drop_unlock; - } - - if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) { - IWL_ERR(priv, "ERROR: No TX rate available.\n"); - goto drop_unlock; - } - - unicast = !is_multicast_ether_addr(hdr->addr1); - id = 0; - - fc = hdr->frame_control; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (ieee80211_is_auth(fc)) - IWL_DEBUG_TX(priv, "Sending AUTH frame\n"); - else if (ieee80211_is_assoc_req(fc)) - IWL_DEBUG_TX(priv, "Sending ASSOC frame\n"); - else if (ieee80211_is_reassoc_req(fc)) - IWL_DEBUG_TX(priv, "Sending REASSOC frame\n"); -#endif - - spin_unlock_irqrestore(&priv->lock, flags); - - hdr_len = ieee80211_hdrlen(fc); - - /* Find index into station table for destination station */ - sta_id = iwl_sta_id_or_broadcast( - priv, &priv->contexts[IWL_RXON_CTX_BSS], - info->control.sta); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n", - hdr->addr1); - goto drop; - } - - IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id); - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; - if (unlikely(tid >= MAX_TID_COUNT)) - goto drop; - } - - /* Descriptor for chosen Tx queue */ - txq = &priv->txq[txq_id]; - q = &txq->q; - - if ((iwl_queue_space(q) < q->high_mark)) - goto drop; - - spin_lock_irqsave(&priv->lock, flags); - - idx = get_cmd_index(q, q->write_ptr, 0); - - /* Set up driver data for this TFD */ - memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info)); - txq->txb[q->write_ptr].skb = skb; - txq->txb[q->write_ptr].ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - /* Init first empty entry in queue's array of Tx/cmd buffers */ - out_cmd = txq->cmd[idx]; - out_meta = &txq->meta[idx]; - tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload; - memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); - memset(tx_cmd, 0, sizeof(*tx_cmd)); - - /* - * Set up the Tx-command (not MAC!) header. - * Store the chosen Tx queue and TFD index within the sequence field; - * after Tx, uCode's Tx response will return this value so driver can - * locate the frame within the tx queue and do post-tx processing. - */ - out_cmd->hdr.cmd = REPLY_TX; - out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | - INDEX_TO_SEQ(q->write_ptr))); - - /* Copy MAC header from skb into command buffer */ - memcpy(tx_cmd->hdr, hdr, hdr_len); - - - if (info->control.hw_key) - iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); - - /* TODO need this for burst mode later on */ - iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); - - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx_cmd->len = cpu_to_le16(len); - - iwl_dbg_log_tx_data_frame(priv, len, hdr); - iwl_update_stats(priv, true, fc, len); - tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; - tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n", - le16_to_cpu(out_cmd->hdr.sequence)); - IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, - ieee80211_hdrlen(fc)); - - /* - * Use the first empty entry in this queue's command buffer array - * to contain the Tx command and MAC header concatenated together - * (payload data will be in another buffer). - * Size of this varies, due to varying MAC header length. - * If end is not dword aligned, we'll have 2 extra bytes at the end - * of the MAC header (device reads on dword boundaries). - * We'll tell device about this padding later. - */ - len = sizeof(struct iwl3945_tx_cmd) + - sizeof(struct iwl_cmd_header) + hdr_len; - len = (len + 3) & ~3; - - /* Physical address of this Tx command's header (not MAC header!), - * within command buffer array. */ - txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr, - len, PCI_DMA_TODEVICE); - /* we do not map meta data ... so we can safely access address to - * provide to unmap command*/ - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, len); - - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, - txcmd_phys, len, 1, 0); - - - /* Set up TFD's 2nd entry to point directly to remainder of skb, - * if any (802.11 null frames have no payload). */ - len = skb->len - hdr_len; - if (len) { - phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len, - len, PCI_DMA_TODEVICE); - priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, - phys_addr, len, - 0, U32_PAD(len)); - } - - - /* Tell device the write index *just past* this latest filled TFD */ - q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); - iwl_txq_update_write_ptr(priv, txq); - spin_unlock_irqrestore(&priv->lock, flags); - - if ((iwl_queue_space(q) < q->high_mark) - && priv->mac80211_registered) { - if (wait_write_ptr) { - spin_lock_irqsave(&priv->lock, flags); - txq->need_update = 1; - iwl_txq_update_write_ptr(priv, txq); - spin_unlock_irqrestore(&priv->lock, flags); - } - - iwl_stop_queue(priv, txq); - } - - return 0; - -drop_unlock: - spin_unlock_irqrestore(&priv->lock, flags); -drop: - return -1; -} - -static int iwl3945_get_measurement(struct iwl_priv *priv, - struct ieee80211_measurement_params *params, - u8 type) -{ - struct iwl_spectrum_cmd spectrum; - struct iwl_rx_packet *pkt; - struct iwl_host_cmd cmd = { - .id = REPLY_SPECTRUM_MEASUREMENT_CMD, - .data = (void *)&spectrum, - .flags = CMD_WANT_SKB, - }; - u32 add_time = le64_to_cpu(params->start_time); - int rc; - int spectrum_resp_status; - int duration = le16_to_cpu(params->duration); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) - add_time = iwl_usecs_to_beacons(priv, - le64_to_cpu(params->start_time) - priv->_3945.last_tsf, - le16_to_cpu(ctx->timing.beacon_interval)); - - memset(&spectrum, 0, sizeof(spectrum)); - - spectrum.channel_count = cpu_to_le16(1); - spectrum.flags = - RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK; - spectrum.filter_flags = MEASUREMENT_FILTER_FLAG; - cmd.len = sizeof(spectrum); - spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len)); - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) - spectrum.start_time = - iwl_add_beacon_time(priv, - priv->_3945.last_beacon_time, add_time, - le16_to_cpu(ctx->timing.beacon_interval)); - else - spectrum.start_time = 0; - - spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT); - spectrum.channels[0].channel = params->channel; - spectrum.channels[0].type = type; - if (ctx->active.flags & RXON_FLG_BAND_24G_MSK) - spectrum.flags |= RXON_FLG_BAND_24G_MSK | - RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK; - - rc = iwl_send_cmd_sync(priv, &cmd); - if (rc) - return rc; - - pkt = (struct iwl_rx_packet *)cmd.reply_page; - if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n"); - rc = -EIO; - } - - spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status); - switch (spectrum_resp_status) { - case 0: /* Command will be handled */ - if (pkt->u.spectrum.id != 0xff) { - IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n", - pkt->u.spectrum.id); - priv->measurement_status &= ~MEASUREMENT_READY; - } - priv->measurement_status |= MEASUREMENT_ACTIVE; - rc = 0; - break; - - case 1: /* Command will not be handled */ - rc = -EAGAIN; - break; - } - - iwl_free_pages(priv, cmd.reply_page); - - return rc; -} - -static void iwl3945_rx_reply_alive(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_alive_resp *palive; - struct delayed_work *pwork; - - palive = &pkt->u.alive_frame; - - IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision " - "0x%01X 0x%01X\n", - palive->is_valid, palive->ver_type, - palive->ver_subtype); - - if (palive->ver_subtype == INITIALIZE_SUBTYPE) { - IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); - memcpy(&priv->card_alive_init, &pkt->u.alive_frame, - sizeof(struct iwl_alive_resp)); - pwork = &priv->init_alive_start; - } else { - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - memcpy(&priv->card_alive, &pkt->u.alive_frame, - sizeof(struct iwl_alive_resp)); - pwork = &priv->alive_start; - iwl3945_disable_events(priv); - } - - /* We delay the ALIVE response by 5ms to - * give the HW RF Kill time to activate... */ - if (palive->is_valid == UCODE_VALID_OK) - queue_delayed_work(priv->workqueue, pwork, - msecs_to_jiffies(5)); - else - IWL_WARN(priv, "uCode did not respond OK.\n"); -} - -static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); -#endif - - IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status); -} - -static void iwl3945_bg_beacon_update(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, beacon_update); - struct sk_buff *beacon; - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, - priv->contexts[IWL_RXON_CTX_BSS].vif); - - if (!beacon) { - IWL_ERR(priv, "update beacon failed\n"); - return; - } - - mutex_lock(&priv->mutex); - /* new beacon skb is allocated every time; dispose previous.*/ - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = beacon; - mutex_unlock(&priv->mutex); - - iwl3945_send_beacon_cmd(priv); -} - -static void iwl3945_rx_beacon_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status); -#ifdef CONFIG_IWLWIFI_DEBUG - u8 rate = beacon->beacon_notify_hdr.rate; - - IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d " - "tsf %d %d rate %d\n", - le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), - le32_to_cpu(beacon->low_tsf), rate); -#endif - - priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); - - if ((priv->iw_mode == NL80211_IFTYPE_AP) && - (!test_bit(STATUS_EXIT_PENDING, &priv->status))) - queue_work(priv->workqueue, &priv->beacon_update); -} - -/* Handle notification from uCode that card's power state is changing - * due to software, hardware, or critical temperature RFKILL */ -static void iwl3945_rx_card_state_notif(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); - unsigned long status = priv->status; - - IWL_WARN(priv, "Card state received: HW:%s SW:%s\n", - (flags & HW_CARD_DISABLED) ? "Kill" : "On", - (flags & SW_CARD_DISABLED) ? "Kill" : "On"); - - iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - - iwl_scan_cancel(priv); - - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &priv->status))) - wiphy_rfkill_set_hw_state(priv->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &priv->status)); - else - wake_up_interruptible(&priv->wait_command_queue); -} - -/** - * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks - * - * Setup the RX handlers for each of the reply types sent from the uCode - * to the host. - * - * This function chains into the hardware specific files for them to setup - * any hardware specific handlers as well. - */ -static void iwl3945_setup_rx_handlers(struct iwl_priv *priv) -{ - priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive; - priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta; - priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error; - priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa; - priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] = - iwl_rx_spectrum_measure_notif; - priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif; - priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] = - iwl_rx_pm_debug_statistics_notif; - priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif; - - /* - * The same handler is used for both the REPLY to a discrete - * statistics request from the host as well as for the periodic - * statistics notifications (after received beacons) from the uCode. - */ - priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics; - priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics; - - iwl_setup_rx_scan_handlers(priv); - priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif; - - /* Set up hardware specific Rx handlers */ - iwl3945_hw_rx_handler_setup(priv); -} - -/************************** RX-FUNCTIONS ****************************/ -/* - * Rx theory of operation - * - * The host allocates 32 DMA target addresses and passes the host address - * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is - * 0 to 31 - * - * Rx Queue Indexes - * The host/firmware share two index registers for managing the Rx buffers. - * - * The READ index maps to the first position that the firmware may be writing - * to -- the driver can read up to (but not including) this position and get - * good data. - * The READ index is managed by the firmware once the card is enabled. - * - * The WRITE index maps to the last position the driver has read from -- the - * position preceding WRITE is the last slot the firmware can place a packet. - * - * The queue is empty (no good data) if WRITE = READ - 1, and is full if - * WRITE = READ. - * - * During initialization, the host sets up the READ queue position to the first - * INDEX position, and WRITE to the last (READ - 1 wrapped) - * - * When the firmware places a packet in a buffer, it will advance the READ index - * and fire the RX interrupt. The driver can then query the READ index and - * process as many packets as possible, moving the WRITE index forward as it - * resets the Rx queue buffers with new memory. - * - * The management in the driver is as follows: - * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When - * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled - * to replenish the iwl->rxq->rx_free. - * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the - * iwl->rxq is replenished and the READ INDEX is updated (updating the - * 'processed' and 'read' driver indexes as well) - * + A received packet is processed and handed to the kernel network stack, - * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. - * - * - * Driver sequence: - * - * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls - * iwl3945_rx_queue_restock - * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx - * queue, updates firmware pointers, and updates - * the WRITE index. If insufficient rx_free buffers - * are available, schedules iwl3945_rx_replenish - * - * -- enable interrupts -- - * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the - * READ INDEX, detaching the SKB from the pool. - * Moves the packet buffer from queue to rx_used. - * Calls iwl3945_rx_queue_restock to refill any empty - * slots. - * ... - * - */ - -/** - * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv, - dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)dma_addr); -} - -/** - * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -static void iwl3945_rx_queue_restock(struct iwl_priv *priv) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - unsigned long flags; - int write; - - spin_lock_irqsave(&rxq->lock, flags); - write = rxq->write & ~0x7; - while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - queue_work(priv->workqueue, &priv->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if ((rxq->write_actual != (rxq->write & ~0x7)) - || (abs(rxq->write - rxq->read) > 7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - iwl_rx_queue_update_write_ptr(priv, rxq); - } -} - -/** - * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl3945_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority) -{ - struct iwl_rx_queue *rxq = &priv->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - struct page *page; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (priv->hw_params.rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); - if (!page) { - if (net_ratelimit()) - IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n"); - if ((rxq->free_count <= RX_LOW_WATERMARK) && - net_ratelimit()) - IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n", - priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - break; - } - - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - __free_pages(page, priv->hw_params.rx_page_order); - return; - } - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - spin_unlock_irqrestore(&rxq->lock, flags); - - rxb->page = page; - /* Get physical address of RB/SKB */ - rxb->page_dma = pci_map_page(priv->pci_dev, page, 0, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - - spin_lock_irqsave(&rxq->lock, flags); - - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - priv->alloc_rxb_page++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - unsigned long flags; - int i; - spin_lock_irqsave(&rxq->lock, flags); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { - /* In the reset function, these buffers may have been allocated - * to an SKB, so we need to unmap and free potential storage */ - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - } - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->write_actual = 0; - rxq->free_count = 0; - spin_unlock_irqrestore(&rxq->lock, flags); -} - -void iwl3945_rx_replenish(void *data) -{ - struct iwl_priv *priv = data; - unsigned long flags; - - iwl3945_rx_allocate(priv, GFP_KERNEL); - - spin_lock_irqsave(&priv->lock, flags); - iwl3945_rx_queue_restock(priv); - spin_unlock_irqrestore(&priv->lock, flags); -} - -static void iwl3945_rx_replenish_now(struct iwl_priv *priv) -{ - iwl3945_rx_allocate(priv, GFP_ATOMIC); - - iwl3945_rx_queue_restock(priv); -} - - -/* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have its SKB set to NULL - * This free routine walks the list of POOL entries and if SKB is set to - * non NULL it is unmapped and freed - */ -static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) -{ - int i; - for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { - if (rxq->pool[i].page != NULL) { - pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __iwl_free_pages(priv, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - } - - dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, - rxq->bd_dma); - dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status), - rxq->rb_stts, rxq->rb_stts_dma); - rxq->bd = NULL; - rxq->rb_stts = NULL; -} - - -/* Convert linear signal-to-noise ratio into dB */ -static u8 ratio2dB[100] = { -/* 0 1 2 3 4 5 6 7 8 9 */ - 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */ - 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */ - 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */ - 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */ - 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */ - 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */ - 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */ - 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */ - 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */ - 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */ -}; - -/* Calculates a relative dB value from a ratio of linear - * (i.e. not dB) signal levels. - * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ -int iwl3945_calc_db_from_ratio(int sig_ratio) -{ - /* 1000:1 or higher just report as 60 dB */ - if (sig_ratio >= 1000) - return 60; - - /* 100:1 or higher, divide by 10 and use table, - * add 20 dB to make up for divide by 10 */ - if (sig_ratio >= 100) - return 20 + (int)ratio2dB[sig_ratio/10]; - - /* We shouldn't see this */ - if (sig_ratio < 1) - return 0; - - /* Use table for ratios 1:1 - 99:1 */ - return (int)ratio2dB[sig_ratio]; -} - -/** - * iwl3945_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -static void iwl3945_rx_handle(struct iwl_priv *priv) -{ - struct iwl_rx_mem_buffer *rxb; - struct iwl_rx_packet *pkt; - struct iwl_rx_queue *rxq = &priv->rxq; - u32 r, i; - int reclaim; - unsigned long flags; - u8 fill_rx = 0; - u32 count = 8; - int total_empty = 0; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; - i = rxq->read; - - /* calculate total frames need to be restock after handling RX */ - total_empty = r - rxq->write_actual; - if (total_empty < 0) - total_empty += RX_QUEUE_SIZE; - - if (total_empty > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i); - - while (i != r) { - int len; - - rxb = rxq->queue[i]; - - /* If an RXB doesn't have a Rx queue slot associated with it, - * then a bug has been introduced in the queue refilling - * routines -- catch it here */ - BUG_ON(rxb == NULL); - - rxq->queue[i] = NULL; - - pci_unmap_page(priv->pci_dev, rxb->page_dma, - PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - pkt = rxb_addr(rxb); - - len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - len += sizeof(u32); /* account for status word */ - trace_iwlwifi_dev_rx(priv, pkt, len); - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) && - (pkt->hdr.cmd != STATISTICS_NOTIFICATION) && - (pkt->hdr.cmd != REPLY_TX); - - /* Based on type of command response or notification, - * handle those that need handling via function in - * rx_handlers table. See iwl3945_setup_rx_handlers() */ - if (priv->rx_handlers[pkt->hdr.cmd]) { - IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i, - get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - priv->isr_stats.rx_handlers[pkt->hdr.cmd]++; - priv->rx_handlers[pkt->hdr.cmd] (priv, rxb); - } else { - /* No handling needed */ - IWL_DEBUG_RX(priv, - "r %d i %d No handler needed for %s, 0x%02x\n", - r, i, get_cmd_string(pkt->hdr.cmd), - pkt->hdr.cmd); - } - - /* - * XXX: After here, we should always check rxb->page - * against NULL before touching it or its virtual - * memory (pkt). Because some rx_handler might have - * already taken or freed the pages. - */ - - if (reclaim) { - /* Invoke any callbacks, transfer the buffer to caller, - * and fire off the (possibly) blocking iwl_send_cmd() - * as we reclaim the driver command queue */ - if (rxb->page) - iwl_tx_cmd_complete(priv, rxb); - else - IWL_WARN(priv, "Claim null rxb?\n"); - } - - /* Reuse the page if possible. For notification packets and - * SKBs that fail to Rx correctly, add them back into the - * rx_free list for reuse later. */ - spin_lock_irqsave(&rxq->lock, flags); - if (rxb->page != NULL) { - rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page, - 0, PAGE_SIZE << priv->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } else - list_add_tail(&rxb->list, &rxq->rx_used); - - spin_unlock_irqrestore(&rxq->lock, flags); - - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode won't assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - rxq->read = i; - iwl3945_rx_replenish_now(priv); - count = 0; - } - } - } - - /* Backtrack one entry */ - rxq->read = i; - if (fill_rx) - iwl3945_rx_replenish_now(priv); - else - iwl3945_rx_queue_restock(priv); -} - -/* call this function to flush any scheduled tasklet */ -static inline void iwl_synchronize_irq(struct iwl_priv *priv) -{ - /* wait to make sure we flush pending tasklet*/ - synchronize_irq(priv->pci_dev->irq); - tasklet_kill(&priv->irq_tasklet); -} - -static const char *desc_lookup(int i) -{ - switch (i) { - case 1: - return "FAIL"; - case 2: - return "BAD_PARAM"; - case 3: - return "BAD_CHECKSUM"; - case 4: - return "NMI_INTERRUPT"; - case 5: - return "SYSASSERT"; - case 6: - return "FATAL_ERROR"; - } - - return "UNKNOWN"; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -void iwl3945_dump_nic_error_log(struct iwl_priv *priv) -{ - u32 i; - u32 desc, time, count, base, data1; - u32 blink1, blink2, ilink1, ilink2; - - base = le32_to_cpu(priv->card_alive.error_event_table_ptr); - - if (!iwl3945_hw_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); - return; - } - - - count = iwl_read_targ_mem(priv, base); - - if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { - IWL_ERR(priv, "Start IWL Error Log Dump:\n"); - IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", - priv->status, count); - } - - IWL_ERR(priv, "Desc Time asrtPC blink2 " - "ilink1 nmiPC Line\n"); - for (i = ERROR_START_OFFSET; - i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET; - i += ERROR_ELEM_SIZE) { - desc = iwl_read_targ_mem(priv, base + i); - time = - iwl_read_targ_mem(priv, base + i + 1 * sizeof(u32)); - blink1 = - iwl_read_targ_mem(priv, base + i + 2 * sizeof(u32)); - blink2 = - iwl_read_targ_mem(priv, base + i + 3 * sizeof(u32)); - ilink1 = - iwl_read_targ_mem(priv, base + i + 4 * sizeof(u32)); - ilink2 = - iwl_read_targ_mem(priv, base + i + 5 * sizeof(u32)); - data1 = - iwl_read_targ_mem(priv, base + i + 6 * sizeof(u32)); - - IWL_ERR(priv, - "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n", - desc_lookup(desc), desc, time, blink1, blink2, - ilink1, ilink2, data1); - trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0, - 0, blink1, blink2, ilink1, ilink2); - } -} - -#define EVENT_START_OFFSET (6 * sizeof(u32)) - -/** - * iwl3945_print_event_log - Dump error event log to syslog - * - */ -static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx, - u32 num_events, u32 mode, - int pos, char **buf, size_t bufsz) -{ - u32 i; - u32 base; /* SRAM byte address of event log header */ - u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (num_events == 0) - return pos; - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - - if (mode == 0) - event_size = 2 * sizeof(u32); - else - event_size = 3 * sizeof(u32); - - ptr = base + EVENT_START_OFFSET + (start_idx * event_size); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&priv->reg_lock, reg_flags); - iwl_grab_nic_access(priv); - - /* Set starting address; reads will auto-increment */ - _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr); - rmb(); - - /* "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. */ - for (i = 0; i < num_events; i++) { - ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (mode == 0) { - /* data, ev */ - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "0x%08x:%04u\n", - time, ev); - } else { - IWL_ERR(priv, "0x%08x\t%04u\n", time, ev); - trace_iwlwifi_dev_ucode_event(priv, 0, - time, ev); - } - } else { - data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "%010u:0x%08x:%04u\n", - time, data, ev); - } else { - IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", - time, data, ev); - trace_iwlwifi_dev_ucode_event(priv, time, - data, ev); - } - } - } - - /* Allow device to power down */ - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->reg_lock, reg_flags); - return pos; -} - -/** - * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog - */ -static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity, - u32 num_wraps, u32 next_entry, - u32 size, u32 mode, - int pos, char **buf, size_t bufsz) -{ - /* - * display the newest DEFAULT_LOG_ENTRIES entries - * i.e the entries just before the next ont that uCode would fill. - */ - if (num_wraps) { - if (next_entry < size) { - pos = iwl3945_print_event_log(priv, - capacity - (size - next_entry), - size - next_entry, mode, - pos, buf, bufsz); - pos = iwl3945_print_event_log(priv, 0, - next_entry, mode, - pos, buf, bufsz); - } else - pos = iwl3945_print_event_log(priv, next_entry - size, - size, mode, - pos, buf, bufsz); - } else { - if (next_entry < size) - pos = iwl3945_print_event_log(priv, 0, - next_entry, mode, - pos, buf, bufsz); - else - pos = iwl3945_print_event_log(priv, next_entry - size, - size, mode, - pos, buf, bufsz); - } - return pos; -} - -#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20) - -int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log, - char **buf, bool display) -{ - u32 base; /* SRAM byte address of event log header */ - u32 capacity; /* event log capacity in # entries */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - u32 size; /* # entries that we'll print */ - int pos = 0; - size_t bufsz = 0; - - base = le32_to_cpu(priv->card_alive.log_event_table_ptr); - if (!iwl3945_hw_valid_rtc_data_addr(base)) { - IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); - return -EINVAL; - } - - /* event log header */ - capacity = iwl_read_targ_mem(priv, base); - mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); - - if (capacity > priv->cfg->base_params->max_event_log_size) { - IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n", - capacity, priv->cfg->base_params->max_event_log_size); - capacity = priv->cfg->base_params->max_event_log_size; - } - - if (next_entry > priv->cfg->base_params->max_event_log_size) { - IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n", - next_entry, priv->cfg->base_params->max_event_log_size); - next_entry = priv->cfg->base_params->max_event_log_size; - } - - size = num_wraps ? capacity : next_entry; - - /* bail out if nothing in log */ - if (size == 0) { - IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); - return pos; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log) - size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; -#else - size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size; -#endif - - IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n", - size); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - if (full_log) - bufsz = capacity * 48; - else - bufsz = size * 48; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - } - if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) { - /* if uCode has wrapped back to top of log, - * start at the oldest entry, - * i.e the next one that uCode would fill. - */ - if (num_wraps) - pos = iwl3945_print_event_log(priv, next_entry, - capacity - next_entry, mode, - pos, buf, bufsz); - - /* (then/else) start at top of log */ - pos = iwl3945_print_event_log(priv, 0, next_entry, mode, - pos, buf, bufsz); - } else - pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#else - pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#endif - return pos; -} - -static void iwl3945_irq_tasklet(struct iwl_priv *priv) -{ - u32 inta, handled = 0; - u32 inta_fh; - unsigned long flags; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&priv->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - * and will clear only when CSR_FH_INT_STATUS gets cleared. */ - inta = iwl_read32(priv, CSR_INT); - iwl_write32(priv, CSR_INT, inta); - - /* Ack/clear/reset pending flow-handler (DMA) interrupts. - * Any new interrupts that happen after this, either while we're - * in this tasklet, or later, will show up in next ISR/tasklet. */ - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & IWL_DL_ISR) { - /* just for debug */ - inta_mask = iwl_read32(priv, CSR_INT_MASK); - IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, inta_mask, inta_fh); - } -#endif - - spin_unlock_irqrestore(&priv->lock, flags); - - /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not - * atomic, make sure that inta covers all the interrupts that - * we've discovered, even if FH interrupt came in just after - * reading CSR_INT. */ - if (inta_fh & CSR39_FH_INT_RX_MASK) - inta |= CSR_INT_BIT_FH_RX; - if (inta_fh & CSR39_FH_INT_TX_MASK) - inta |= CSR_INT_BIT_FH_TX; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERR(priv, "Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl_disable_interrupts(priv); - - priv->isr_stats.hw++; - iwl_irq_handle_error(priv); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - IWL_DEBUG_ISR(priv, "Scheduler finished to transmit " - "the frame/frames.\n"); - priv->isr_stats.sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - IWL_DEBUG_ISR(priv, "Alive interrupt\n"); - priv->isr_stats.alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERR(priv, "Microcode SW error detected. " - "Restarting 0x%X.\n", inta); - priv->isr_stats.sw++; - iwl_irq_handle_error(priv); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - iwl_txq_update_write_ptr(priv, &priv->txq[0]); - iwl_txq_update_write_ptr(priv, &priv->txq[1]); - iwl_txq_update_write_ptr(priv, &priv->txq[2]); - iwl_txq_update_write_ptr(priv, &priv->txq[3]); - iwl_txq_update_write_ptr(priv, &priv->txq[4]); - iwl_txq_update_write_ptr(priv, &priv->txq[5]); - - priv->isr_stats.wakeup++; - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - iwl3945_rx_handle(priv); - priv->isr_stats.rx++; - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - } - - if (inta & CSR_INT_BIT_FH_TX) { - IWL_DEBUG_ISR(priv, "Tx interrupt\n"); - priv->isr_stats.tx++; - - iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6)); - iwl_write_direct32(priv, FH39_TCSR_CREDIT - (FH39_SRVC_CHNL), 0x0); - handled |= CSR_INT_BIT_FH_TX; - } - - if (inta & ~handled) { - IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled); - priv->isr_stats.unhandled++; - } - - if (inta & ~priv->inta_mask) { - IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n", - inta & ~priv->inta_mask); - IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &priv->status)) - iwl_enable_interrupts(priv); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { - inta = iwl_read32(priv, CSR_INT); - inta_mask = iwl_read32(priv, CSR_INT_MASK); - inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " - "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); - } -#endif -} - -static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - struct iwl3945_scan_channel *scan_ch) -{ - const struct ieee80211_supported_band *sband; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added = 0; - u8 channel = 0; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) { - IWL_ERR(priv, "invalid band\n"); - return added; - } - - active_dwell = iwl_get_active_dwell_time(priv, band, 0); - passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - - channel = iwl_get_single_channel_number(priv, band); - - if (channel) { - scan_ch->channel = channel; - scan_ch->type = 0; /* passive */ - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* Set txpower levels to defaults */ - scan_ch->tpc.dsp_atten = 110; - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); - added++; - } else - IWL_ERR(priv, "no valid channel found\n"); - return added; -} - -static int iwl3945_get_channels_for_scan(struct iwl_priv *priv, - enum ieee80211_band band, - u8 is_active, u8 n_probes, - struct iwl3945_scan_channel *scan_ch, - struct ieee80211_vif *vif) -{ - struct ieee80211_channel *chan; - const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) - return 0; - - active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); - passive_dwell = iwl_get_passive_dwell_time(priv, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { - chan = priv->scan_request->channels[i]; - - if (chan->band != band) - continue; - - scan_ch->channel = chan->hw_value; - - ch_info = iwl_get_channel_info(priv, band, scan_ch->channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n", - scan_ch->channel); - continue; - } - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* If passive , set up for auto-switch - * and use long active_dwell time. - */ - if (!is_active || is_channel_passive(ch_info) || - (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) { - scan_ch->type = 0; /* passive */ - if (IWL_UCODE_API(priv->ucode_ver) == 1) - scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1); - } else { - scan_ch->type = 1; /* active */ - } - - /* Set direct probe bits. These may be used both for active - * scan channels (probes gets sent right away), - * or for passive channels (probes get se sent only after - * hearing clear Rx packet).*/ - if (IWL_UCODE_API(priv->ucode_ver) >= 2) { - if (n_probes) - scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes); - } else { - /* uCode v1 does not allow setting direct probe bits on - * passive channel. */ - if ((scan_ch->type & 1) && n_probes) - scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes); - } - - /* Set txpower levels to defaults */ - scan_ch->tpc.dsp_atten = 110; - /* scan_pwr_info->tpc.dsp_atten; */ - - /*scan_pwr_info->tpc.tx_gain; */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; - else { - scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - } - - IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n", - scan_ch->channel, - (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE", - (scan_ch->type & 1) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); - return added; -} - -static void iwl3945_init_hw_rates(struct iwl_priv *priv, - struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = iwl3945_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= (iwl3945_rates[i].plcp == 10) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv) -{ - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data); - iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot); -} - -/** - * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host, - * looking at all data. - */ -static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len) -{ - u32 val; - u32 save_len = len; - int rc = 0; - u32 errcnt; - - IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); - - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - IWL39_RTC_INST_LOWER_BOUND); - - errcnt = 0; - for (; len > 0; len -= sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - save_len - len, val, le32_to_cpu(*image)); - rc = -EIO; - errcnt++; - if (errcnt >= 20) - break; - } - } - - - if (!errcnt) - IWL_DEBUG_INFO(priv, - "ucode image in INSTRUCTION memory is good\n"); - - return rc; -} - - -/** - * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) -{ - u32 val; - int rc = 0; - u32 errcnt = 0; - u32 i; - - IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, - i + IWL39_RTC_INST_LOWER_BOUND); - val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { -#if 0 /* Enable this if you want to see details */ - IWL_ERR(priv, "uCode INST section is invalid at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - i, val, *image); -#endif - rc = -EIO; - errcnt++; - if (errcnt >= 3) - break; - } - } - - return rc; -} - - -/** - * iwl3945_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -static int iwl3945_verify_ucode(struct iwl_priv *priv) -{ - __le32 *image; - u32 len; - int rc = 0; - - /* Try bootstrap */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl3945_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n"); - return 0; - } - - /* Try initialize */ - image = (__le32 *)priv->ucode_init.v_addr; - len = priv->ucode_init.len; - rc = iwl3945_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n"); - return 0; - } - - /* Try runtime/protocol */ - image = (__le32 *)priv->ucode_code.v_addr; - len = priv->ucode_code.len; - rc = iwl3945_verify_inst_sparse(priv, image, len); - if (rc == 0) { - IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); - - /* Since nothing seems to match, show first several data entries in - * instruction SRAM, so maybe visual inspection will give a clue. - * Selection of bootstrap image (vs. other images) is arbitrary. */ - image = (__le32 *)priv->ucode_boot.v_addr; - len = priv->ucode_boot.len; - rc = iwl3945_verify_inst_full(priv, image, len); - - return rc; -} - -static void iwl3945_nic_start(struct iwl_priv *priv) -{ - /* Remove all resets to allow NIC to operate */ - iwl_write32(priv, CSR_RESET, 0); -} - -#define IWL3945_UCODE_GET(item) \ -static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\ -{ \ - return le32_to_cpu(ucode->u.v1.item); \ -} - -static u32 iwl3945_ucode_get_header_size(u32 api_ver) -{ - return 24; -} - -static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode) -{ - return (u8 *) ucode->u.v1.data; -} - -IWL3945_UCODE_GET(inst_size); -IWL3945_UCODE_GET(data_size); -IWL3945_UCODE_GET(init_size); -IWL3945_UCODE_GET(init_data_size); -IWL3945_UCODE_GET(boot_size); - -/** - * iwl3945_read_ucode - Read uCode images from disk file. - * - * Copy into buffers for card to fetch via bus-mastering - */ -static int iwl3945_read_ucode(struct iwl_priv *priv) -{ - const struct iwl_ucode_header *ucode; - int ret = -EINVAL, index; - const struct firmware *ucode_raw; - /* firmware file name contains uCode/driver compatibility version */ - const char *name_pre = priv->cfg->fw_name_pre; - const unsigned int api_max = priv->cfg->ucode_api_max; - const unsigned int api_min = priv->cfg->ucode_api_min; - char buf[25]; - u8 *src; - size_t len; - u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size; - - /* Ask kernel firmware_class module to get the boot firmware off disk. - * request_firmware() is synchronous, file is in memory on return. */ - for (index = api_max; index >= api_min; index--) { - sprintf(buf, "%s%u%s", name_pre, index, ".ucode"); - ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev); - if (ret < 0) { - IWL_ERR(priv, "%s firmware file req failed: %d\n", - buf, ret); - if (ret == -ENOENT) - continue; - else - goto error; - } else { - if (index < api_max) - IWL_ERR(priv, "Loaded firmware %s, " - "which is deprecated. " - " Please use API v%u instead.\n", - buf, api_max); - IWL_DEBUG_INFO(priv, "Got firmware '%s' file " - "(%zd bytes) from disk\n", - buf, ucode_raw->size); - break; - } - } - - if (ret < 0) - goto error; - - /* Make sure that we got at least our header! */ - if (ucode_raw->size < iwl3945_ucode_get_header_size(1)) { - IWL_ERR(priv, "File size way too small!\n"); - ret = -EINVAL; - goto err_release; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (struct iwl_ucode_header *)ucode_raw->data; - - priv->ucode_ver = le32_to_cpu(ucode->ver); - api_ver = IWL_UCODE_API(priv->ucode_ver); - inst_size = iwl3945_ucode_get_inst_size(ucode); - data_size = iwl3945_ucode_get_data_size(ucode); - init_size = iwl3945_ucode_get_init_size(ucode); - init_data_size = iwl3945_ucode_get_init_data_size(ucode); - boot_size = iwl3945_ucode_get_boot_size(ucode); - src = iwl3945_ucode_get_data(ucode); - - /* api_ver should match the api version forming part of the - * firmware filename ... but we don't check for that and only rely - * on the API version read from firmware header from here on forward */ - - if (api_ver < api_min || api_ver > api_max) { - IWL_ERR(priv, "Driver unable to support your firmware API. " - "Driver supports v%u, firmware is v%u.\n", - api_max, api_ver); - priv->ucode_ver = 0; - ret = -EINVAL; - goto err_release; - } - if (api_ver != api_max) - IWL_ERR(priv, "Firmware has old API version. Expected %u, " - "got %u. New firmware can be obtained " - "from http://www.intellinuxwireless.org.\n", - api_max, api_ver); - - IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver)); - - snprintf(priv->hw->wiphy->fw_version, - sizeof(priv->hw->wiphy->fw_version), - "%u.%u.%u.%u", - IWL_UCODE_MAJOR(priv->ucode_ver), - IWL_UCODE_MINOR(priv->ucode_ver), - IWL_UCODE_API(priv->ucode_ver), - IWL_UCODE_SERIAL(priv->ucode_ver)); - - IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", - priv->ucode_ver); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n", - inst_size); - IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n", - data_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n", - init_size); - IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n", - init_data_size); - IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n", - boot_size); - - - /* Verify size of file vs. image size info in file's header */ - if (ucode_raw->size != iwl3945_ucode_get_header_size(api_ver) + - inst_size + data_size + init_size + - init_data_size + boot_size) { - - IWL_DEBUG_INFO(priv, - "uCode file size %zd does not match expected size\n", - ucode_raw->size); - ret = -EINVAL; - goto err_release; - } - - /* Verify that uCode images will fit in card's SRAM */ - if (inst_size > IWL39_MAX_INST_SIZE) { - IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n", - inst_size); - ret = -EINVAL; - goto err_release; - } - - if (data_size > IWL39_MAX_DATA_SIZE) { - IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n", - data_size); - ret = -EINVAL; - goto err_release; - } - if (init_size > IWL39_MAX_INST_SIZE) { - IWL_DEBUG_INFO(priv, - "uCode init instr len %d too large to fit in\n", - init_size); - ret = -EINVAL; - goto err_release; - } - if (init_data_size > IWL39_MAX_DATA_SIZE) { - IWL_DEBUG_INFO(priv, - "uCode init data len %d too large to fit in\n", - init_data_size); - ret = -EINVAL; - goto err_release; - } - if (boot_size > IWL39_MAX_BSM_SIZE) { - IWL_DEBUG_INFO(priv, - "uCode boot instr len %d too large to fit in\n", - boot_size); - ret = -EINVAL; - goto err_release; - } - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - priv->ucode_code.len = inst_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code); - - priv->ucode_data.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data); - - priv->ucode_data_backup.len = data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); - - if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || - !priv->ucode_data_backup.v_addr) - goto err_pci_alloc; - - /* Initialization instructions and data */ - if (init_size && init_data_size) { - priv->ucode_init.len = init_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init); - - priv->ucode_init_data.len = init_data_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data); - - if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr) - goto err_pci_alloc; - } - - /* Bootstrap (instructions only, no data) */ - if (boot_size) { - priv->ucode_boot.len = boot_size; - iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot); - - if (!priv->ucode_boot.v_addr) - goto err_pci_alloc; - } - - /* Copy images into buffers for card's bus-master reads ... */ - - /* Runtime instructions (first block of data in file) */ - len = inst_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) uCode instr len %zd\n", len); - memcpy(priv->ucode_code.v_addr, src, len); - src += len; - - IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", - priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr); - - /* Runtime data (2nd block) - * NOTE: Copy into backup buffer will be done in iwl3945_up() */ - len = data_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) uCode data len %zd\n", len); - memcpy(priv->ucode_data.v_addr, src, len); - memcpy(priv->ucode_data_backup.v_addr, src, len); - src += len; - - /* Initialization instructions (3rd block) */ - if (init_size) { - len = init_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) init instr len %zd\n", len); - memcpy(priv->ucode_init.v_addr, src, len); - src += len; - } - - /* Initialization data (4th block) */ - if (init_data_size) { - len = init_data_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) init data len %zd\n", len); - memcpy(priv->ucode_init_data.v_addr, src, len); - src += len; - } - - /* Bootstrap instructions (5th block) */ - len = boot_size; - IWL_DEBUG_INFO(priv, - "Copying (but not loading) boot instr len %zd\n", len); - memcpy(priv->ucode_boot.v_addr, src, len); - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - return 0; - - err_pci_alloc: - IWL_ERR(priv, "failed to allocate pci memory\n"); - ret = -ENOMEM; - iwl3945_dealloc_ucode_pci(priv); - - err_release: - release_firmware(ucode_raw); - - error: - return ret; -} - - -/** - * iwl3945_set_ucode_ptrs - Set uCode address location - * - * Tell initialization uCode where to find runtime uCode. - * - * BSM registers initially contain pointers to initialization uCode. - * We need to replace them to load runtime uCode inst and data, - * and to save runtime data when powering down. - */ -static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv) -{ - dma_addr_t pinst; - dma_addr_t pdata; - - /* bits 31:0 for 3945 */ - pinst = priv->ucode_code.p_addr; - pdata = priv->ucode_data_backup.p_addr; - - /* Tell bootstrap uCode where to find image to load */ - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, - priv->ucode_data.len); - - /* Inst byte count must be last to set up, bit 31 signals uCode - * that all new ptr/size info is in place */ - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, - priv->ucode_code.len | BSM_DRAM_INST_LOAD); - - IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n"); - - return 0; -} - -/** - * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received - * - * Called after REPLY_ALIVE notification received from "initialize" uCode. - * - * Tell "initialize" uCode to go ahead and load the runtime uCode. - */ -static void iwl3945_init_alive_start(struct iwl_priv *priv) -{ - /* Check alive response for "valid" sign from uCode */ - if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n"); - goto restart; - } - - /* Bootstrap uCode has loaded initialize uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "initialize" alive if code weren't properly loaded. */ - if (iwl3945_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n"); - goto restart; - } - - /* Send pointers to protocol/runtime uCode image ... init code will - * load and launch runtime uCode, which will send us another "Alive" - * notification. */ - IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); - if (iwl3945_set_ucode_ptrs(priv)) { - /* Runtime instruction load won't happen; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n"); - goto restart; - } - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - -/** - * iwl3945_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl3945_init_alive_start()). - */ -static void iwl3945_alive_start(struct iwl_priv *priv) -{ - int thermal_spin = 0; - u32 rfkill; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - - if (priv->card_alive.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Alive failed.\n"); - goto restart; - } - - /* Initialize uCode has loaded Runtime uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "runtime" alive if code weren't properly loaded. */ - if (iwl3945_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n"); - goto restart; - } - - rfkill = iwl_read_prph(priv, APMG_RFKILL_REG); - IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill); - - if (rfkill & 0x1) { - clear_bit(STATUS_RF_KILL_HW, &priv->status); - /* if RFKILL is not on, then wait for thermal - * sensor in adapter to kick in */ - while (iwl3945_hw_get_temperature(priv) == 0) { - thermal_spin++; - udelay(10); - } - - if (thermal_spin) - IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n", - thermal_spin * 10); - } else - set_bit(STATUS_RF_KILL_HW, &priv->status); - - /* After the ALIVE response, we can send commands to 3945 uCode */ - set_bit(STATUS_ALIVE, &priv->status); - - /* Enable watchdog to monitor the driver tx queues */ - iwl_setup_watchdog(priv); - - if (iwl_is_rfkill(priv)) - return; - - ieee80211_wake_queues(priv->hw); - - priv->active_rate = IWL_RATES_MASK_3945; - - iwl_power_update_mode(priv, true); - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { - struct iwl3945_rxon_cmd *active_rxon = - (struct iwl3945_rxon_cmd *)(&ctx->active); - - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - /* Initialize our rx_config data */ - iwl_connection_init_rx_config(priv, ctx); - } - - /* Configure Bluetooth device coexistence support */ - priv->cfg->ops->hcmd->send_bt_config(priv); - - set_bit(STATUS_READY, &priv->status); - - /* Configure the adapter for unassociated operation */ - iwl3945_commit_rxon(priv, ctx); - - iwl3945_reg_txpower_periodic(priv); - - IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - wake_up_interruptible(&priv->wait_command_queue); - - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - -static void iwl3945_cancel_deferred_work(struct iwl_priv *priv); - -static void __iwl3945_down(struct iwl_priv *priv) -{ - unsigned long flags; - int exit_pending; - - IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); - - iwl_scan_cancel_timeout(priv, 200); - - exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); - - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set - * to prevent rearm timer */ - del_timer_sync(&priv->watchdog); - - /* Station information will now be cleared in device */ - iwl_clear_ucode_stations(priv, NULL); - iwl_dealloc_bcast_stations(priv); - iwl_clear_driver_stations(priv); - - /* Unblock any waiting calls */ - wake_up_interruptible_all(&priv->wait_command_queue); - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* stop and reset the on-board processor */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /* tell the device to stop sending interrupts */ - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - iwl_synchronize_irq(priv); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - /* If we have not previously called iwl3945_init() then - * clear all bits but the RF Kill bits and return */ - if (!iwl_is_init(priv)) { - priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - goto exit; - } - - /* ...otherwise clear out all the status bits but the RF Kill - * bit and continue taking the NIC down. */ - priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_FW_ERROR, &priv->status) << - STATUS_FW_ERROR | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - - iwl3945_hw_txq_ctx_stop(priv); - iwl3945_hw_rxq_stop(priv); - - /* Power-down device's busmaster DMA clocks */ - iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); - udelay(5); - - /* Stop the device, and put it in low power state */ - iwl_apm_stop(priv); - - exit: - memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp)); - - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = NULL; - - /* clear out any free frames */ - iwl3945_clear_free_frames(priv); -} - -static void iwl3945_down(struct iwl_priv *priv) -{ - mutex_lock(&priv->mutex); - __iwl3945_down(priv); - mutex_unlock(&priv->mutex); - - iwl3945_cancel_deferred_work(priv); -} - -#define MAX_HW_RESTARTS 5 - -static int iwl3945_alloc_bcast_station(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - unsigned long flags; - u8 sta_id; - - spin_lock_irqsave(&priv->sta_lock, flags); - sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL); - if (sta_id == IWL_INVALID_STATION) { - IWL_ERR(priv, "Unable to prepare broadcast station\n"); - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return -EINVAL; - } - - priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE; - priv->stations[sta_id].used |= IWL_STA_BCAST; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return 0; -} - -static int __iwl3945_up(struct iwl_priv *priv) -{ - int rc, i; - - rc = iwl3945_alloc_bcast_station(priv); - if (rc) - return rc; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { - IWL_ERR(priv, "ucode not available for device bring up\n"); - return -EIO; - } - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &priv->status); - else { - set_bit(STATUS_RF_KILL_HW, &priv->status); - IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n"); - return -ENODEV; - } - - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - - rc = iwl3945_hw_nic_init(priv); - if (rc) { - IWL_ERR(priv, "Unable to int nic\n"); - return rc; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(priv, CSR_INT, 0xFFFFFFFF); - iwl_enable_interrupts(priv); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Copy original ucode data image from disk into backup cache. - * This will be used to initialize the on-board processor's - * data SRAM for a clean start when the runtime program first loads. */ - memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, - priv->ucode_data.len); - - /* We return success when we resume from suspend and rf_kill is on. */ - if (test_bit(STATUS_RF_KILL_HW, &priv->status)) - return 0; - - for (i = 0; i < MAX_HW_RESTARTS; i++) { - - /* load bootstrap state machine, - * load bootstrap program into processor's memory, - * prepare to load the "initialize" uCode */ - rc = priv->cfg->ops->lib->load_ucode(priv); - - if (rc) { - IWL_ERR(priv, - "Unable to set up bootstrap uCode: %d\n", rc); - continue; - } - - /* start card; "initialize" will load runtime ucode */ - iwl3945_nic_start(priv); - - IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n"); - - return 0; - } - - set_bit(STATUS_EXIT_PENDING, &priv->status); - __iwl3945_down(priv); - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - /* tried to restart and config the device for as long as our - * patience could withstand */ - IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i); - return -EIO; -} - - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl3945_bg_init_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, init_alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_init_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl3945_bg_alive_start(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, alive_start.work); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_alive_start(priv); - mutex_unlock(&priv->mutex); -} - -/* - * 3945 cannot interrupt driver when hardware rf kill switch toggles; - * driver must poll CSR_GP_CNTRL_REG register for change. This register - * *is* readable even when device has been SW_RESET into low power mode - * (e.g. during RF KILL). - */ -static void iwl3945_rfkill_poll(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, _3945.rfkill_poll.work); - bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status); - bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL) - & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); - - if (new_rfkill != old_rfkill) { - if (new_rfkill) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill); - - IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n", - new_rfkill ? "disable radio" : "enable radio"); - } - - /* Keep this running, even if radio now enabled. This will be - * cancelled in mac_start() if system decides to start again */ - queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, - round_jiffies_relative(2 * HZ)); - -} - -int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = sizeof(struct iwl3945_scan_cmd), - .flags = CMD_SIZE_HUGE, - }; - struct iwl3945_scan_cmd *scan; - u8 n_probes = 0; - enum ieee80211_band band; - bool is_active = false; - int ret; - - lockdep_assert_held(&priv->mutex); - - if (!priv->scan_cmd) { - priv->scan_cmd = kmalloc(sizeof(struct iwl3945_scan_cmd) + - IWL_MAX_SCAN_SIZE, GFP_KERNEL); - if (!priv->scan_cmd) { - IWL_DEBUG_SCAN(priv, "Fail to allocate scan memory\n"); - return -ENOMEM; - } - } - scan = priv->scan_cmd; - memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) { - u16 interval = 0; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - - IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); - - if (priv->is_internal_short_scan) - interval = 0; - else - interval = vif->bss_conf.beacon_int; - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - /* - * suspend time format: - * 0-19: beacon interval in usec (time before exec.) - * 20-23: 0 - * 24-31: number of beacons (suspend between channels) - */ - - extra = (suspend_time / interval) << 24; - scan_suspend_time = 0xFF0FFFFF & - (extra | ((suspend_time % interval) * 1024)); - - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - if (priv->is_internal_short_scan) { - IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); - } else if (priv->scan_request->n_ssids) { - int i, p = 0; - IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); - for (i = 0; i < priv->scan_request->n_ssids; i++) { - /* always does wildcard anyway */ - if (!priv->scan_request->ssids[i].ssid_len) - continue; - scan->direct_scan[p].id = WLAN_EID_SSID; - scan->direct_scan[p].len = - priv->scan_request->ssids[i].ssid_len; - memcpy(scan->direct_scan[p].ssid, - priv->scan_request->ssids[i].ssid, - priv->scan_request->ssids[i].ssid_len); - n_probes++; - p++; - } - is_active = true; - } else - IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n"); - - /* We don't build a direct scan probe request; the uCode will do - * that based on the direct_mask added to each channel entry */ - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - /* flags + rate selection */ - - switch (priv->scan_band) { - case IEEE80211_BAND_2GHZ: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - scan->tx_cmd.rate = IWL_RATE_1M_PLCP; - band = IEEE80211_BAND_2GHZ; - break; - case IEEE80211_BAND_5GHZ: - scan->tx_cmd.rate = IWL_RATE_6M_PLCP; - band = IEEE80211_BAND_5GHZ; - break; - default: - IWL_WARN(priv, "Invalid scan band\n"); - return -EIO; - } - - /* - * If active scaning is requested but a certain channel - * is marked passive, we can do active scanning if we - * detect transmissions. - */ - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_DISABLED; - - if (!priv->is_internal_short_scan) { - scan->tx_cmd.len = cpu_to_le16( - iwl_fill_probe_req(priv, - (struct ieee80211_mgmt *)scan->data, - vif->addr, - priv->scan_request->ie, - priv->scan_request->ie_len, - IWL_MAX_SCAN_SIZE - sizeof(*scan))); - } else { - /* use bcast addr, will not be transmitted but must be valid */ - scan->tx_cmd.len = cpu_to_le16( - iwl_fill_probe_req(priv, - (struct ieee80211_mgmt *)scan->data, - iwl_bcast_addr, NULL, 0, - IWL_MAX_SCAN_SIZE - sizeof(*scan))); - } - /* select Rx antennas */ - scan->flags |= iwl3945_get_antenna_flags(priv); - - if (priv->is_internal_short_scan) { - scan->channel_count = - iwl3945_get_single_channel_for_scan(priv, vif, band, - (void *)&scan->data[le16_to_cpu( - scan->tx_cmd.len)]); - } else { - scan->channel_count = - iwl3945_get_channels_for_scan(priv, band, is_active, n_probes, - (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif); - } - - if (scan->channel_count == 0) { - IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); - return -EIO; - } - - cmd.len += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl3945_scan_channel); - cmd.data = scan; - scan->len = cpu_to_le16(cmd.len); - - set_bit(STATUS_SCAN_HW, &priv->status); - ret = iwl_send_cmd_sync(priv, &cmd); - if (ret) - clear_bit(STATUS_SCAN_HW, &priv->status); - return ret; -} - -void iwl3945_post_scan(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - /* - * Since setting the RXON may have been deferred while - * performing the scan, fire one off if needed - */ - if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) - iwl3945_commit_rxon(priv, ctx); -} - -static void iwl3945_bg_restart(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) { - struct iwl_rxon_context *ctx; - mutex_lock(&priv->mutex); - for_each_context(priv, ctx) - ctx->vif = NULL; - priv->is_open = 0; - mutex_unlock(&priv->mutex); - iwl3945_down(priv); - ieee80211_restart_hw(priv->hw); - } else { - iwl3945_down(priv); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - __iwl3945_up(priv); - mutex_unlock(&priv->mutex); - } -} - -static void iwl3945_bg_rx_replenish(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, rx_replenish); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - mutex_lock(&priv->mutex); - iwl3945_rx_replenish(priv); - mutex_unlock(&priv->mutex); -} - -void iwl3945_post_associate(struct iwl_priv *priv) -{ - int rc = 0; - struct ieee80211_conf *conf = NULL; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (!ctx->vif || !priv->is_open) - return; - - if (ctx->vif->type == NL80211_IFTYPE_AP) { - IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__); - return; - } - - IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n", - ctx->vif->bss_conf.aid, ctx->active.bssid_addr); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - iwl_scan_cancel_timeout(priv, 200); - - conf = ieee80211_get_hw_conf(priv->hw); - - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl3945_commit_rxon(priv, ctx); - - rc = iwl_send_rxon_timing(priv, ctx); - if (rc) - IWL_WARN(priv, "REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - - ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid); - - IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n", - ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int); - - if (ctx->vif->bss_conf.use_short_preamble) - ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { - if (ctx->vif->bss_conf.use_short_slot) - ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - } - - iwl3945_commit_rxon(priv, ctx); - - switch (ctx->vif->type) { - case NL80211_IFTYPE_STATION: - iwl3945_rate_scale_init(priv->hw, IWL_AP_ID); - break; - case NL80211_IFTYPE_ADHOC: - iwl3945_send_beacon_cmd(priv); - break; - default: - IWL_ERR(priv, "%s Should not be called in %d mode\n", - __func__, ctx->vif->type); - break; - } -} - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -#define UCODE_READY_TIMEOUT (2 * HZ) - -static int iwl3945_mac_start(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&priv->mutex); - - /* fetch ucode file from disk, alloc and copy to bus-master buffers ... - * ucode filename and max sizes are card-specific. */ - - if (!priv->ucode_code.len) { - ret = iwl3945_read_ucode(priv); - if (ret) { - IWL_ERR(priv, "Could not read microcode: %d\n", ret); - mutex_unlock(&priv->mutex); - goto out_release_irq; - } - } - - ret = __iwl3945_up(priv); - - mutex_unlock(&priv->mutex); - - if (ret) - goto out_release_irq; - - IWL_DEBUG_INFO(priv, "Start UP work.\n"); - - /* Wait for START_ALIVE from ucode. Otherwise callbacks from - * mac80211 will not be run successfully. */ - ret = wait_event_interruptible_timeout(priv->wait_command_queue, - test_bit(STATUS_READY, &priv->status), - UCODE_READY_TIMEOUT); - if (!ret) { - if (!test_bit(STATUS_READY, &priv->status)) { - IWL_ERR(priv, - "Wait for START_ALIVE timeout after %dms.\n", - jiffies_to_msecs(UCODE_READY_TIMEOUT)); - ret = -ETIMEDOUT; - goto out_release_irq; - } - } - - /* ucode is running and will send rfkill notifications, - * no need to poll the killswitch state anymore */ - cancel_delayed_work(&priv->_3945.rfkill_poll); - - priv->is_open = 1; - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; - -out_release_irq: - priv->is_open = 0; - IWL_DEBUG_MAC80211(priv, "leave - failed\n"); - return ret; -} - -static void iwl3945_mac_stop(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!priv->is_open) { - IWL_DEBUG_MAC80211(priv, "leave - skip\n"); - return; - } - - priv->is_open = 0; - - iwl3945_down(priv); - - flush_workqueue(priv->workqueue); - - /* start polling the killswitch state again */ - queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, - round_jiffies_relative(2 * HZ)); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = hw->priv; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - - if (iwl3945_tx_skb(priv, skb)) - dev_kfree_skb_any(skb); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - return NETDEV_TX_OK; -} - -void iwl3945_config_ap(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_vif *vif = ctx->vif; - int rc = 0; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* The following should be done only at AP bring up */ - if (!(iwl_is_associated(priv, IWL_RXON_CTX_BSS))) { - - /* RXON - unassoc (to set timing command) */ - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - iwl3945_commit_rxon(priv, ctx); - - /* RXON Timing */ - rc = iwl_send_rxon_timing(priv, ctx); - if (rc) - IWL_WARN(priv, "REPLY_RXON_TIMING failed - " - "Attempting to continue.\n"); - - ctx->staging.assoc_id = 0; - - if (vif->bss_conf.use_short_preamble) - ctx->staging.flags |= - RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= - ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { - if (vif->bss_conf.use_short_slot) - ctx->staging.flags |= - RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= - ~RXON_FLG_SHORT_SLOT_MSK; - } - /* restore RXON assoc */ - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - iwl3945_commit_rxon(priv, ctx); - } - iwl3945_send_beacon_cmd(priv); - - /* FIXME - we need to add code here to detect a totally new - * configuration, reset the AP, unassoc, rxon timing, assoc, - * clear sta table, add BCAST sta... */ -} - -static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct iwl_priv *priv = hw->priv; - int ret = 0; - u8 sta_id = IWL_INVALID_STATION; - u8 static_key; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (iwl3945_mod_params.sw_crypto) { - IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - /* - * To support IBSS RSN, don't program group keys in IBSS, the - * hardware will then not attempt to decrypt the frames. - */ - if (vif->type == NL80211_IFTYPE_ADHOC && - !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) - return -EOPNOTSUPP; - - static_key = !iwl_is_associated(priv, IWL_RXON_CTX_BSS); - - if (!static_key) { - sta_id = iwl_sta_id_or_broadcast( - priv, &priv->contexts[IWL_RXON_CTX_BSS], sta); - if (sta_id == IWL_INVALID_STATION) - return -EINVAL; - } - - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 100); - - switch (cmd) { - case SET_KEY: - if (static_key) - ret = iwl3945_set_static_key(priv, key); - else - ret = iwl3945_set_dynamic_key(priv, key, sta_id); - IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (static_key) - ret = iwl3945_remove_static_key(priv); - else - ret = iwl3945_clear_sta_key_info(priv, sta_id); - IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static int iwl3945_mac_sta_add(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct iwl_priv *priv = hw->priv; - struct iwl3945_sta_priv *sta_priv = (void *)sta->drv_priv; - int ret; - bool is_ap = vif->type == NL80211_IFTYPE_STATION; - u8 sta_id; - - IWL_DEBUG_INFO(priv, "received request to add station %pM\n", - sta->addr); - mutex_lock(&priv->mutex); - IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", - sta->addr); - sta_priv->common.sta_id = IWL_INVALID_STATION; - - - ret = iwl_add_station_common(priv, &priv->contexts[IWL_RXON_CTX_BSS], - sta->addr, is_ap, sta, &sta_id); - if (ret) { - IWL_ERR(priv, "Unable to add station %pM (%d)\n", - sta->addr, ret); - /* Should we return success if return code is EEXIST ? */ - mutex_unlock(&priv->mutex); - return ret; - } - - sta_priv->common.sta_id = sta_id; - - /* Initialize rate scaling */ - IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n", - sta->addr); - iwl3945_rs_rate_init(priv, sta, sta_id); - mutex_unlock(&priv->mutex); - - return 0; -} - -static void iwl3945_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct iwl_priv *priv = hw->priv; - __le32 filter_or = 0, filter_nand = 0; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - -#define CHK(test, flag) do { \ - if (*total_flags & (test)) \ - filter_or |= (flag); \ - else \ - filter_nand |= (flag); \ - } while (0) - - IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", - changed_flags, *total_flags); - - CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); - CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK); - CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); - -#undef CHK - - mutex_lock(&priv->mutex); - - ctx->staging.filter_flags &= ~filter_nand; - ctx->staging.filter_flags |= filter_or; - - /* - * Not committing directly because hardware can perform a scan, - * but even if hw is ready, committing here breaks for some reason, - * we'll eventually commit the filter flags change anyway. - */ - - mutex_unlock(&priv->mutex); - - /* - * Receiving all multicast frames is always enabled by the - * default flags setup in iwl_connection_init_rx_config() - * since we currently do not support programming multicast - * filters into the device. - */ - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} - - -/***************************************************************************** - * - * sysfs attributes - * - *****************************************************************************/ - -#ifdef CONFIG_IWLWIFI_DEBUG - -/* - * The following adds a new attribute to the sysfs representation - * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/) - * used for controlling the debug level. - * - * See the level definitions in iwl for details. - * - * The debug_level being managed using sysfs below is a per device debug - * level that is used instead of the global debug level if it (the per - * device debug level) is set. - */ -static ssize_t show_debug_level(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv)); -} -static ssize_t store_debug_level(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = strict_strtoul(buf, 0, &val); - if (ret) - IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf); - else { - priv->debug_level = val; - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, - "Not enough memory to generate traffic log\n"); - } - return strnlen(buf, count); -} - -static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, - show_debug_level, store_debug_level); - -#endif /* CONFIG_IWLWIFI_DEBUG */ - -static ssize_t show_temperature(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv)); -} - -static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); - -static ssize_t show_tx_power(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "%d\n", priv->tx_power_user_lmt); -} - -static ssize_t store_tx_power(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - char *p = (char *)buf; - u32 val; - - val = simple_strtoul(p, &p, 10); - if (p == buf) - IWL_INFO(priv, ": %s is not in decimal form.\n", buf); - else - iwl3945_hw_reg_set_txpower(priv, val); - - return count; -} - -static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power); - -static ssize_t show_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - return sprintf(buf, "0x%04X\n", ctx->active.flags); -} - -static ssize_t store_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - u32 flags = simple_strtoul(buf, NULL, 0); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - mutex_lock(&priv->mutex); - if (le32_to_cpu(ctx->staging.flags) != flags) { - /* Cancel any currently running scans... */ - if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARN(priv, "Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n", - flags); - ctx->staging.flags = cpu_to_le32(flags); - iwl3945_commit_rxon(priv, ctx); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags); - -static ssize_t show_filter_flags(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - return sprintf(buf, "0x%04X\n", - le32_to_cpu(ctx->active.filter_flags)); -} - -static ssize_t store_filter_flags(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u32 filter_flags = simple_strtoul(buf, NULL, 0); - - mutex_lock(&priv->mutex); - if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) { - /* Cancel any currently running scans... */ - if (iwl_scan_cancel_timeout(priv, 100)) - IWL_WARN(priv, "Could not cancel scan.\n"); - else { - IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = " - "0x%04X\n", filter_flags); - ctx->staging.filter_flags = - cpu_to_le32(filter_flags); - iwl3945_commit_rxon(priv, ctx); - } - } - mutex_unlock(&priv->mutex); - - return count; -} - -static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, - store_filter_flags); - -static ssize_t show_measurement(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_spectrum_notification measure_report; - u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *)&measure_report; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (!(priv->measurement_status & MEASUREMENT_READY)) { - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } - memcpy(&measure_report, &priv->measure_report, size); - priv->measurement_status = 0; - spin_unlock_irqrestore(&priv->lock, flags); - - while (size && (PAGE_SIZE - len)) { - hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len, - PAGE_SIZE - len, 1); - len = strlen(buf); - if (PAGE_SIZE - len) - buf[len++] = '\n'; - - ofs += 16; - size -= min(size, 16U); - } - - return len; -} - -static ssize_t store_measurement(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_measurement_params params = { - .channel = le16_to_cpu(ctx->active.channel), - .start_time = cpu_to_le64(priv->_3945.last_tsf), - .duration = cpu_to_le16(1), - }; - u8 type = IWL_MEASURE_BASIC; - u8 buffer[32]; - u8 channel; - - if (count) { - char *p = buffer; - strncpy(buffer, buf, min(sizeof(buffer), count)); - channel = simple_strtoul(p, NULL, 0); - if (channel) - params.channel = channel; - - p = buffer; - while (*p && *p != ' ') - p++; - if (*p) - type = simple_strtoul(p + 1, NULL, 0); - } - - IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on " - "channel %d (for '%s')\n", type, params.channel, buf); - iwl3945_get_measurement(priv, ¶ms, type); - - return count; -} - -static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, - show_measurement, store_measurement); - -static ssize_t store_retry_rate(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - priv->retry_rate = simple_strtoul(buf, NULL, 0); - if (priv->retry_rate <= 0) - priv->retry_rate = 1; - - return count; -} - -static ssize_t show_retry_rate(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - return sprintf(buf, "%d", priv->retry_rate); -} - -static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate, - store_retry_rate); - - -static ssize_t show_channels(struct device *d, - struct device_attribute *attr, char *buf) -{ - /* all this shit doesn't belong into sysfs anyway */ - return 0; -} - -static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL); - -static ssize_t show_antenna(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - return sprintf(buf, "%d\n", iwl3945_mod_params.antenna); -} - -static ssize_t store_antenna(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d); - int ant; - - if (count == 0) - return 0; - - if (sscanf(buf, "%1i", &ant) != 1) { - IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n"); - return count; - } - - if ((ant >= 0) && (ant <= 2)) { - IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant); - iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant; - } else - IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant); - - - return count; -} - -static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna); - -static ssize_t show_status(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - if (!iwl_is_alive(priv)) - return -EAGAIN; - return sprintf(buf, "0x%08x\n", (int)priv->status); -} - -static DEVICE_ATTR(status, S_IRUGO, show_status, NULL); - -static ssize_t dump_error_log(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct iwl_priv *priv = dev_get_drvdata(d); - char *p = (char *)buf; - - if (p[0] == '1') - iwl3945_dump_nic_error_log(priv); - - return strnlen(buf, count); -} - -static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log); - -/***************************************************************************** - * - * driver setup and tear down - * - *****************************************************************************/ - -static void iwl3945_setup_deferred_work(struct iwl_priv *priv) -{ - priv->workqueue = create_singlethread_workqueue(DRV_NAME); - - init_waitqueue_head(&priv->wait_command_queue); - - INIT_WORK(&priv->restart, iwl3945_bg_restart); - INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish); - INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update); - INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start); - INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start); - INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll); - - iwl_setup_scan_deferred_work(priv); - - iwl3945_hw_setup_deferred_work(priv); - - init_timer(&priv->watchdog); - priv->watchdog.data = (unsigned long)priv; - priv->watchdog.function = iwl_bg_watchdog; - - tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) - iwl3945_irq_tasklet, (unsigned long)priv); -} - -static void iwl3945_cancel_deferred_work(struct iwl_priv *priv) -{ - iwl3945_hw_cancel_deferred_work(priv); - - cancel_delayed_work_sync(&priv->init_alive_start); - cancel_delayed_work(&priv->alive_start); - cancel_work_sync(&priv->beacon_update); - - iwl_cancel_scan_deferred_work(priv); -} - -static struct attribute *iwl3945_sysfs_entries[] = { - &dev_attr_antenna.attr, - &dev_attr_channels.attr, - &dev_attr_dump_errors.attr, - &dev_attr_flags.attr, - &dev_attr_filter_flags.attr, - &dev_attr_measurement.attr, - &dev_attr_retry_rate.attr, - &dev_attr_status.attr, - &dev_attr_temperature.attr, - &dev_attr_tx_power.attr, -#ifdef CONFIG_IWLWIFI_DEBUG - &dev_attr_debug_level.attr, -#endif - NULL -}; - -static struct attribute_group iwl3945_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = iwl3945_sysfs_entries, -}; - -struct ieee80211_ops iwl3945_hw_ops = { - .tx = iwl3945_mac_tx, - .start = iwl3945_mac_start, - .stop = iwl3945_mac_stop, - .add_interface = iwl_mac_add_interface, - .remove_interface = iwl_mac_remove_interface, - .change_interface = iwl_mac_change_interface, - .config = iwl_legacy_mac_config, - .configure_filter = iwl3945_configure_filter, - .set_key = iwl3945_mac_set_key, - .conf_tx = iwl_mac_conf_tx, - .reset_tsf = iwl_legacy_mac_reset_tsf, - .bss_info_changed = iwl_legacy_mac_bss_info_changed, - .hw_scan = iwl_mac_hw_scan, - .sta_add = iwl3945_mac_sta_add, - .sta_remove = iwl_mac_sta_remove, - .tx_last_beacon = iwl_mac_tx_last_beacon, -}; - -static int iwl3945_init_drv(struct iwl_priv *priv) -{ - int ret; - struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom; - - priv->retry_rate = 1; - priv->beacon_skb = NULL; - - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); - mutex_init(&priv->sync_cmd_mutex); - - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->iw_mode = NL80211_IFTYPE_STATION; - priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; - - /* initialize force reset */ - priv->force_reset[IWL_RF_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_RF_RESET; - priv->force_reset[IWL_FW_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_FW_RELOAD; - - - priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER; - priv->tx_power_next = IWL_DEFAULT_TX_POWER; - - if (eeprom->version < EEPROM_3945_EEPROM_VERSION) { - IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n", - eeprom->version); - ret = -EINVAL; - goto err; - } - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); - goto err; - } - - /* Set up txpower settings in driver for all channels */ - if (iwl3945_txpower_set_from_eeprom(priv)) { - ret = -EIO; - goto err_free_channel_map; - } - - ret = iwlcore_init_geos(priv); - if (ret) { - IWL_ERR(priv, "initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - iwl3945_init_hw_rates(priv, priv->ieee_rates); - - return 0; - -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - -#define IWL3945_MAX_PROBE_REQUEST 200 - -static int iwl3945_setup_mac(struct iwl_priv *priv) -{ - int ret; - struct ieee80211_hw *hw = priv->hw; - - hw->rate_control_algorithm = "iwl-3945-rs"; - hw->sta_data_size = sizeof(struct iwl3945_sta_priv); - hw->vif_data_size = sizeof(struct iwl_vif_priv); - - /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SPECTRUM_MGMT; - - if (!priv->cfg->base_params->broken_powersave) - hw->flags |= IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; - - hw->wiphy->interface_modes = - priv->contexts[IWL_RXON_CTX_BSS].interface_modes; - - hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | - WIPHY_FLAG_DISABLE_BEACON_HINTS | - WIPHY_FLAG_IBSS_RSN; - - hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945; - /* we create the 802.11 header and a zero-length SSID element */ - hw->wiphy->max_scan_ie_len = IWL3945_MAX_PROBE_REQUEST - 24 - 2; - - /* Default value; 4 EDCA QOS priorities */ - hw->queues = 4; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &priv->bands[IEEE80211_BAND_2GHZ]; - - if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &priv->bands[IEEE80211_BAND_5GHZ]; - - iwl_leds_init(priv); - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); - return ret; - } - priv->mac80211_registered = 1; - - return 0; -} - -static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int err = 0, i; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); - struct iwl3945_eeprom *eeprom; - unsigned long flags; - - /*********************** - * 1. Allocating HW data - * ********************/ - - /* mac80211 allocates memory for this device instance, including - * space for this driver's private structure */ - hw = iwl_alloc_all(cfg); - if (hw == NULL) { - pr_err("Can not allocate network device\n"); - err = -ENOMEM; - goto out; - } - priv = hw->priv; - SET_IEEE80211_DEV(hw, &pdev->dev); - - priv->cmd_queue = IWL39_CMD_QUEUE_NUM; - - /* 3945 has only one valid context */ - priv->valid_contexts = BIT(IWL_RXON_CTX_BSS); - - for (i = 0; i < NUM_IWL_RXON_CTX; i++) - priv->contexts[i].ctxid = i; - - priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; - priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; - priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; - priv->contexts[IWL_RXON_CTX_BSS].interface_modes = - BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); - priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; - priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; - priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; - - /* - * Disabling hardware scan means that mac80211 will perform scans - * "the hard way", rather than using device's scan. - */ - if (iwl3945_mod_params.disable_hw_scan) { - dev_printk(KERN_DEBUG, &(pdev->dev), - "sw scan support is deprecated\n"); - iwl3945_hw_ops.hw_scan = NULL; - } - - - IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); - priv->cfg = cfg; - priv->pci_dev = pdev; - priv->inta_mask = CSR_INI_SET_MASK; - - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, "Not enough memory to generate traffic log\n"); - - /*************************** - * 2. Initializing PCI bus - * *************************/ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - - if (pci_enable_device(pdev)) { - err = -ENODEV; - goto out_ieee80211_free_hw; - } - - pci_set_master(pdev); - - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - if (err) { - IWL_WARN(priv, "No suitable DMA available.\n"); - goto out_pci_disable_device; - } - - pci_set_drvdata(pdev, priv); - err = pci_request_regions(pdev, DRV_NAME); - if (err) - goto out_pci_disable_device; - - /*********************** - * 3. Read REV Register - * ********************/ - priv->hw_base = pci_iomap(pdev, 0, 0); - if (!priv->hw_base) { - err = -ENODEV; - goto out_pci_release_regions; - } - - IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n", - (unsigned long long) pci_resource_len(pdev, 0)); - IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base); - - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); - - /* these spin locks will be used in apm_ops.init and EEPROM access - * we should init now - */ - spin_lock_init(&priv->reg_lock); - spin_lock_init(&priv->lock); - - /* - * stop and reset the on-board processor just in case it is in a - * strange state ... like being left stranded by a primary kernel - * and this is now the kdump kernel trying to start up - */ - iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /*********************** - * 4. Read EEPROM - * ********************/ - - /* Read the EEPROM */ - err = iwl_eeprom_init(priv); - if (err) { - IWL_ERR(priv, "Unable to init EEPROM\n"); - goto out_iounmap; - } - /* MAC Address location in EEPROM same for 3945/4965 */ - eeprom = (struct iwl3945_eeprom *)priv->eeprom; - IWL_DEBUG_INFO(priv, "MAC address: %pM\n", eeprom->mac_address); - SET_IEEE80211_PERM_ADDR(priv->hw, eeprom->mac_address); - - /*********************** - * 5. Setup HW Constants - * ********************/ - /* Device-specific setup */ - if (iwl3945_hw_set_hw_params(priv)) { - IWL_ERR(priv, "failed to set hw settings\n"); - goto out_eeprom_free; - } - - /*********************** - * 6. Setup priv - * ********************/ - - err = iwl3945_init_drv(priv); - if (err) { - IWL_ERR(priv, "initializing driver failed\n"); - goto out_unset_hw_params; - } - - IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n", - priv->cfg->name); - - /*********************** - * 7. Setup Services - * ********************/ - - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - pci_enable_msi(priv->pci_dev); - - err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr, - IRQF_SHARED, DRV_NAME, priv); - if (err) { - IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq); - goto out_disable_msi; - } - - err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); - if (err) { - IWL_ERR(priv, "failed to create sysfs device attributes\n"); - goto out_release_irq; - } - - iwl_set_rxon_channel(priv, - &priv->bands[IEEE80211_BAND_2GHZ].channels[5], - &priv->contexts[IWL_RXON_CTX_BSS]); - iwl3945_setup_deferred_work(priv); - iwl3945_setup_rx_handlers(priv); - iwl_power_initialize(priv); - - /********************************* - * 8. Setup and Register mac80211 - * *******************************/ - - iwl_enable_interrupts(priv); - - err = iwl3945_setup_mac(priv); - if (err) - goto out_remove_sysfs; - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err); - - /* Start monitoring the killswitch */ - queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll, - 2 * HZ); - - return 0; - - out_remove_sysfs: - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); - out_release_irq: - free_irq(priv->pci_dev->irq, priv); - out_disable_msi: - pci_disable_msi(priv->pci_dev); - iwlcore_free_geos(priv); - iwl_free_channel_map(priv); - out_unset_hw_params: - iwl3945_unset_hw_params(priv); - out_eeprom_free: - iwl_eeprom_free(priv); - out_iounmap: - pci_iounmap(pdev, priv->hw_base); - out_pci_release_regions: - pci_release_regions(pdev); - out_pci_disable_device: - pci_set_drvdata(pdev, NULL); - pci_disable_device(pdev); - out_ieee80211_free_hw: - iwl_free_traffic_mem(priv); - ieee80211_free_hw(priv->hw); - out: - return err; -} - -static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) -{ - struct iwl_priv *priv = pci_get_drvdata(pdev); - unsigned long flags; - - if (!priv) - return; - - IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); - - iwl_dbgfs_unregister(priv); - - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl_leds_exit(priv); - - if (priv->mac80211_registered) { - ieee80211_unregister_hw(priv->hw); - priv->mac80211_registered = 0; - } else { - iwl3945_down(priv); - } - - /* - * Make sure device is reset to low power before unloading driver. - * This may be redundant with iwl_down(), but there are paths to - * run iwl_down() without calling apm_ops.stop(), and there are - * paths to avoid running iwl_down() at all before leaving driver. - * This (inexpensive) call *makes sure* device is reset. - */ - iwl_apm_stop(priv); - - /* make sure we flush any pending irq or - * tasklet for the driver - */ - spin_lock_irqsave(&priv->lock, flags); - iwl_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - iwl_synchronize_irq(priv); - - sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); - - cancel_delayed_work_sync(&priv->_3945.rfkill_poll); - - iwl3945_dealloc_ucode_pci(priv); - - if (priv->rxq.bd) - iwl3945_rx_queue_free(priv, &priv->rxq); - iwl3945_hw_txq_ctx_free(priv); - - iwl3945_unset_hw_params(priv); - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->workqueue); - - /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes - * priv->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - iwl_free_traffic_mem(priv); - - free_irq(pdev->irq, priv); - pci_disable_msi(pdev); - - pci_iounmap(pdev, priv->hw_base); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - - iwl_free_channel_map(priv); - iwlcore_free_geos(priv); - kfree(priv->scan_cmd); - if (priv->beacon_skb) - dev_kfree_skb(priv->beacon_skb); - - ieee80211_free_hw(priv->hw); -} - - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -static struct pci_driver iwl3945_driver = { - .name = DRV_NAME, - .id_table = iwl3945_hw_card_ids, - .probe = iwl3945_pci_probe, - .remove = __devexit_p(iwl3945_pci_remove), - .driver.pm = IWL_PM_OPS, -}; - -static int __init iwl3945_init(void) -{ - - int ret; - pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); - pr_info(DRV_COPYRIGHT "\n"); - - ret = iwl3945_rate_control_register(); - if (ret) { - pr_err("Unable to register rate control algorithm: %d\n", ret); - return ret; - } - - ret = pci_register_driver(&iwl3945_driver); - if (ret) { - pr_err("Unable to initialize PCI module\n"); - goto error_register; - } - - return ret; - -error_register: - iwl3945_rate_control_unregister(); - return ret; -} - -static void __exit iwl3945_exit(void) -{ - pci_unregister_driver(&iwl3945_driver); - iwl3945_rate_control_unregister(); -} - -MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX)); - -module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO); -MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); -module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO); -MODULE_PARM_DESC(swcrypto, - "using software crypto (default 1 [software])\n"); -#ifdef CONFIG_IWLWIFI_DEBUG -module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "debug output mask"); -#endif -module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, - int, S_IRUGO); -MODULE_PARM_DESC(disable_hw_scan, - "disable hardware scanning (default 0) (deprecated)"); -module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error"); - -module_exit(iwl3945_exit); -module_init(iwl3945_init); -- 1.7.0.4