Return-path: Received: from 80-190-117-144.ip-home.de ([80.190.117.144]:34299 "EHLO bu3sch.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755132Ab1CGLmc (ORCPT ); Mon, 7 Mar 2011 06:42:32 -0500 Subject: Re: WARN_ON in ieee80211_scan_completed_finish triggered From: Michael Buesch To: Johannes Berg Cc: "linux-wireless@vger.kernel.org" , Felix Fietkau , Ben Greear In-Reply-To: <1299491485.3790.2.camel@jlt3.sipsolutions.net> (sfid-20110307_105130_457515_FFFFFFFF997C7B78) References: <1299443142.1292.6.camel@marge> <1299491485.3790.2.camel@jlt3.sipsolutions.net> (sfid-20110307_105130_457515_FFFFFFFF997C7B78) Content-Type: text/plain; charset="UTF-8" Date: Mon, 07 Mar 2011 12:42:27 +0100 Message-ID: <1299498147.5665.3.camel@marge> Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: On Mon, 2011-03-07 at 10:51 +0100, Johannes Berg wrote: > On Sun, 2011-03-06 at 21:25 +0100, Michael Buesch wrote: > > I just noticed the following warning on my p54spi device > > with compat-wireless-2011-02-25 (OpenWrt): > > > > > [ 1182.826599] WARNING: at net/mac80211/scan.c:310 ieee80211_rx_bss_free+0x20c/0x4b8 [mac80211]() > > Unfortunately the backtrace gives no hint at all, is it possible that > there was an ifdown that canceled the scan? I don't think there was an ifdown. It seems that it happened right after a regulatory update. See printk timestamps in the full kernel log: [ 0.000000] Linux version 2.6.38-rc7 (mb@marge) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #6 PREEMPT Sun Mar 6 20:40:45 CET 2011 [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387f [ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache [ 0.000000] Machine: Nokia N810 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP2420 [ 0.000000] [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0xa0000 [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c03eb718, node_mem_map c044b000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz [ 0.000000] GPMC revision 2.0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext4,ext3,ext2,squashfs,jffs2 console=tty0 console=ttyO2,115200n8 earlyprintk [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 125508k/125508k available, 5564k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc002a000 ( 136 kB) [ 0.000000] .text : 0xc002a000 - 0xc03c0704 (3674 kB) [ 0.000000] .data : 0xc03c2000 - 0xc03ebdc0 ( 168 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:391 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 32000 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.001770] Calibrating delay loop... 320.37 BogoMIPS (lpj=1253376) [ 0.175567] pid_max: default: 32768 minimum: 301 [ 0.176300] Mount-cache hash table entries: 512 [ 0.177246] CPU: Testing write buffer coherency: ok [ 0.178771] devtmpfs: initialized [ 0.182037] omap_voltage_early_init: voltage driver support not added [ 0.184509] print_constraints: dummy: [ 0.185089] NET: Registered protocol family 16 [ 0.189636] omap_device: omap_gpio.0: new worst case activate latency 0: 91552 [ 0.189880] OMAP GPIO hardware version 1.8 [ 0.190093] OMAP GPIO hardware version 1.8 [ 0.190277] OMAP GPIO hardware version 1.8 [ 0.190460] OMAP GPIO hardware version 1.8 [ 0.197967] omap_mux_init: Add partition: #1: core, flags: 3 [ 0.205627] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517 [ 0.205688] omap_device: omap_uart.0: new worst case activate latency 0: 30517 [ 0.208465] N8x0 MIPID config loaded [ 0.208587] N8x0 Blizzard initializedUSBFS INIT 1 [ 0.230499] USBFS INIT 2 [ 0.230560] USBFS INIT 3 [ 0.230621] PLAT OTG INIT [ 0.231414] OTG_SYSCON_1 = 00000004 [ 0.231445] OTG_SYSCON_2 = 00000100 [ 0.231475] USB: hmc 16, usb0 6 wires, Mini-AB on usb0 [ 0.232269] OTG_SYSCON_1 = 00030004 [ 0.232299] USBFS INIT 4 [ 0.232360] TUSB 6010 [ 0.240234] OMAP DMA hardware revision 2.0 [ 0.242492] omap2_clk_init_cpufreq_table: no matching entries in rate_table [ 0.277343] bio: create slab at 0 [ 0.281402] SCSI subsystem initialized [ 0.287536] omap_device: omap_i2c.1: new worst case activate latency 0: 30517 [ 0.287719] omap_i2c omap_i2c.1: bus 1 rev3.4 at 400 kHz [ 0.289581] omap_i2c omap_i2c.2: bus 2 rev3.4 at 400 kHz [ 0.292236] omap_device: omap_i2c.2: new worst case deactivate latency 0: 30517 [ 0.293670] tahvo tahvo: Betty v2.2 found [ 0.294677] retu retu: Vilma v1.5 found [ 0.303985] Switching to clocksource 32k_counter [ 0.305450] Switched to NOHz mode on CPU #0 [ 0.377166] NET: Registered protocol family 2 [ 0.377563] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.378326] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.378662] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.378875] TCP: Hash tables configured (established 4096 bind 4096) [ 0.378936] TCP reno registered [ 0.378997] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.379119] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.380187] NET: Registered protocol family 1 [ 0.381530] PMU: registered new PMU device of type 0 [ 0.427642] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.427795] Registering mini_fo version $Id$ [ 0.429718] JFFS2 version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.433135] msgmni has been set to 245 [ 0.435455] io scheduler noop registered [ 0.435791] io scheduler cfq registered (default) [ 0.438598] omapfb: ls041y3 rev 81 LCD detected, 24 data lines [ 0.439117] omapfb: configured for panel ls041y3 [ 0.443756] omapfb: DISPC version 2.0 initialized [ 0.443908] omapfb: RFBI version 1.0 initialized [ 0.460998] omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3) [ 0.461242] omapfb omapfb: s1d1374x: setting update mode to auto [ 0.516326] Console: switching to colour frame buffer device 100x30 [ 0.535919] omapfb: Framebuffer initialized. Total vram 770048 planes 1 [ 0.542968] omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz [ 0.551971] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.565460] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.574371] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.583160] omap_uart.2: ttyO2 at MMIO 0x4806e000 (irq = 74) is a OMAP UART2 [ 1.850708] console [ttyO2] enabled [ 1.866058] omap_rng omap_rng: OMAP Random Number Generator ver. 40 [ 1.915496] brd: module loaded [ 1.943664] loop: module loaded [ 1.955474] Menelaus rev 2.2 [ 1.981536] OneNAND driver initializing [ 1.993377] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base c88c0000 [ 2.017761] OneNAND Manufacturer: Samsung (0xec) [ 2.017791] Muxed OneNAND 256MB 1.8V 16-bit (0x40) [ 2.030364] OneNAND version = 0x0022 [ 2.041412] Chip support all block unlock [ 2.041442] Chip has 2 plane [ 2.042999] Scanning device for bad blocks [ 2.084777] onenand_bbt_wait: ecc 0x2222 ctrl 0x2440 intr 0x8080 addr1 0x20e addr8 0x0 [ 2.084808] OneNAND eraseblock 526 is an initial bad block [ 2.140777] onenand_bbt_wait: ecc 0x2222 ctrl 0x2440 intr 0x8080 addr1 0x4fa addr8 0x0 [ 2.140808] OneNAND eraseblock 1274 is an initial bad block [ 2.169250] onenand_bbt_wait: ecc 0x2222 ctrl 0x2440 intr 0x8080 addr1 0x60e addr8 0x0 [ 2.169281] OneNAND eraseblock 1550 is an initial bad block [ 2.210418] Creating 5 MTD partitions on "omap2-onenand": [ 2.222839] 0x000000000000-0x000000020000 : "bootloader" [ 2.240142] 0x000000020000-0x000000080000 : "config" [ 2.256988] 0x000000080000-0x000000280000 : "kernel" [ 2.274078] 0x000000280000-0x000000680000 : "initfs" [ 2.290588] 0x000000680000-0x000010000000 : "rootfs" [ 2.311157] mousedev: PS/2 mouse device common for all mice [ 2.365905] Registered led device: n810::keyboard [ 2.366851] Registered led device: n810::cover [ 2.368011] input: Internal keyboard as /devices/virtual/input/input0 [ 2.383239] i2c-core: driver [lm8323] using legacy suspend method [ 2.396606] i2c-core: driver [lm8323] using legacy resume method [ 2.410156] TSC2005 driver initializing [ 2.422424] input: TSC2005 touchscreen as /devices/virtual/input/input1 [ 2.438690] i2c /dev entries driver [ 2.453491] input: retu-pwrbutton as /devices/virtual/input/input2 [ 2.471160] input: retu-headset as /devices/platform/retu/retu-headset/input/input3 [ 2.488769] cpuidle: using governor ladder [ 2.499908] cpuidle: using governor menu [ 2.511016] sdhci: Secure Digital Host Controller Interface driver [ 2.524200] sdhci: Copyright(c) Pierre Ossman [ 2.734375] OMAP-mmc: waiting for cards... [ 3.016998] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.032714] mmc0: new SD card at address aaaa [ 3.045440] mmcblk0: mmc0:aaaa SU02G 1.84 GiB [ 3.060668] mmcblk0: p1 p2 [ 3.148742] mmci-omap mmci-omap.0: command timeout (CMD52) [ 3.161010] mmci-omap mmci-omap.0: command timeout (CMD52) [ 3.174041] mmci-omap mmci-omap.0: command timeout (CMD52) [ 3.190399] mmci-omap mmci-omap.0: command timeout (CMD8) [ 3.202087] mmci-omap mmci-omap.0: command timeout (CMD8) [ 3.214599] mmci-omap mmci-omap.0: command timeout (CMD5) [ 3.226715] mmci-omap mmci-omap.0: command timeout (CMD5) [ 3.237976] mmci-omap mmci-omap.0: command timeout (CMD5) [ 3.249847] mmci-omap mmci-omap.0: command timeout (CMD5) [ 3.261688] mmci-omap mmci-omap.0: command timeout (CMD5) [ 3.273529] mmci-omap mmci-omap.0: command timeout (CMD55) [ 3.284759] mmci-omap mmci-omap.0: command timeout (CMD55) [ 3.296539] mmci-omap mmci-omap.0: command timeout (CMD55) [ 3.307312] mmci-omap mmci-omap.0: command timeout (CMD55) [ 3.318634] mmci-omap mmci-omap.0: command timeout (CMD55) [ 3.329895] mmci-omap mmci-omap.0: command timeout (CMD55) [ 3.380340] mmc1: new MMC card at address 0001 [ 3.391143] mmcblk1: mmc1:0001 000000 1.87 GiB [ 3.404632] mmcblk1: p1 [ 3.411804] mmcblk1: p1 size 4014064 extends beyond EOD, truncated [ 3.426452] omap_sham_mod_init: loading omap-sham driver [ 3.436645] omap_sham_mod_init: Unsupported cpu [ 3.446014] omap_aes_mod_init: loading omap-aes driver [ 3.455749] omap_aes_mod_init: Unsupported cpu [ 3.466461] TCP cubic registered [ 3.478729] NET: Registered protocol family 10 [ 3.490325] NET: Registered protocol family 17 [ 3.498962] Registering the dns_resolver key type [ 3.507751] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 3.522644] omap_voltage_late_init: Voltage driver support not added [ 3.533935] Power Management for OMAP2 initializing [ 3.543365] PRCM revision 1.0 [ 3.551910] input: slide as /devices/virtual/input/input4 [ 3.564422] input: kb_lock as /devices/virtual/input/input5 [ 3.576293] clock: disabling unused clocks to save power [ 3.587158] Bootup reason: pwr_key [ 3.595855] OMAP GPIO switch handler initializing [ 3.613067] gpio-switch: required switch not found (-1, cam_act) [ 3.625457] gpio-switch: required switch not found (-1, cam_turn) [ 3.637512] slide (GPIO 110) is now closed [ 3.647491] kb_lock (GPIO 102) is now open [ 3.657501] headphone (GPIO 107) is now disconnected [ 3.826507] EXT4-fs (mmcblk0p1): recovery complete [ 3.840332] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.855499] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 3.870178] devtmpfs: mounted [ 3.880065] Freeing init memory: 136K [ 8.648925] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 10.420623] retu-n810bm retu-n810bm: Requesting CAL BME PMM block firmware file n810-cal-bme-pmm.fw [ 10.740936] Compat-wireless backport release: compat-wireless-2011-01-31-19-g74d6d79 [ 10.816772] Backport based on wireless-testing.git master-2011-02-25 [ 10.861450] firmware retu-n810bm: firmware_loading_store: vmap() failed [ 10.921936] retu-n810bm retu-n810bm: CAL PMM block image file not found [ 11.344207] cfg80211: Calling CRDA to update world regulatory domain [ 11.700561] cfg80211: World regulatory domain updated: [ 11.734283] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.765319] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.796569] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.835601] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.866699] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.898132] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.939666] usbcore: registered new interface driver usbfs [ 11.955139] usbcore: registered new interface driver hub [ 11.970336] usbcore: registered new device driver usb [ 12.694671] RPC: Registered udp transport module. [ 12.707641] RPC: Registered tcp transport module. [ 12.720489] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.086395] PPP generic driver version 2.4.2 [ 14.090728] tun: Universal TUN/TAP device driver, 1.6 [ 14.104095] tun: (C) 1999-2004 Max Krasnyansky [ 14.274139] ieee80211 phy0: p54 detected a LM20 firmware [ 14.288146] p54: rx_mtu reduced from 3240 to 2376 [ 14.301025] ieee80211 phy0: FW rev 2.13.0.0.a.13.14 - Softmac protocol 5.6 [ 14.316223] ieee80211 phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 14.434204] firmware spi2.0: firmware_loading_store: vmap() failed [ 14.449462] p54spi spi2.0: loading default eeprom... [ 14.464416] ieee80211 phy0: hwaddr 00:02:ee:c0:ff:ee, MAC:isl3820 RF:Longbow [ 14.483703] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 14.490203] Registered led device: p54-phy0::assoc [ 14.491485] Registered led device: p54-phy0::tx [ 14.499816] Registered led device: p54-phy0::rx [ 14.501281] Registered led device: p54-phy0::radio [ 14.501525] p54spi spi2.0: is registered as 'phy0' [ 14.713531] nfs: Unknown symbol nfsacl_decode (err 0) [ 14.753784] nfs: Unknown symbol nfsacl_encode (err 0) [ 14.832611] nfs: Unknown symbol svc_gss_principal (err 0) [ 14.991241] nfsd: Unknown symbol nfsacl_decode (err 0) [ 15.012420] nfsd: Unknown symbol gss_mech_get_by_pseudoflavor (err 0) [ 15.041809] nfsd: Unknown symbol nfsacl_encode (err 0) [ 15.098236] nfsd: Unknown symbol gss_pseudoflavor_to_service (err 0) [ 15.129791] nfsd: Unknown symbol svc_gss_principal (err 0) [ 15.150604] nfsd: Unknown symbol gss_mech_put (err 0) [ 15.187347] nfsd: Unknown symbol svcauth_gss_flavor (err 0) [ 15.399688] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.796020] NET: Registered protocol family 24 [ 16.069122] nf_conntrack version 0.5.0 (1963 buckets, 7852 max) [ 17.162780] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 17.782226] TAHVO PROBE USB [ 17.792907] tahvo: Registering interrupt 0 for device vbus_interrupt [ 17.807678] PWR OFF 1 [ 17.817718] PWR OFF 2 [ 17.827606] PWR OFF 3 [ 17.837249] PWR OFF 4 [ 17.846679] PWR OFF 5 [ 17.856079] PWR OFF 6 [ 17.865112] PWR OFF 7 [ 17.873931] TAHVO SET TRANSCEIVER [ 17.883941] USB cable disconnected [ 17.894042] TAHVO USB DONE [ 17.904266] TAHVO PROBE USB OTG [ 17.913879] TAHVO OTG INIT 1 [ 17.922607] TAHVO OTG INIT 2 [ 17.931152] TAHVO OTG INIT 3 [ 17.940643] TAHVO OTG INIT 4 [ 17.949035] TAHVO OTG INIT 5 [ 17.957214] TAHVO OTG INIT 6 [ 17.965179] TAHVO OTG INIT 7 [ 17.972991] TAHVO OMAP OTG REQUEST IRQ [ 17.982086] RESULT 0 [ 17.990325] TAHVO USB LOADED [ 18.109436] musb-hdrc: version 6.0, tusb-omap-dma, otg (peripheral+host), debug=0 [ 18.127807] nop_usb_xceiv nop_usb_xceiv: can't register transceiver, err: -16 [ 18.156311] nop_usb_xceiv: probe of nop_usb_xceiv failed with error -16 [ 18.195098] tusb: prcm2.0 int2.0 gpio3.0 dma3.0 dieid2 rev3.1 [ 18.218353] drivers/usb/musb/tusb6010.c tusb_musb_disable: dma still active [ 18.243194] musb-hdrc: ConfigData=0x06 (UTMI-8, dyn FIFOs, SoftConn) [ 18.243255] musb-hdrc: MHDRC RTL version 1.400 [ 18.243286] musb-hdrc: setup fifo_mode 4 [ 18.243347] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 18.244018] musb-hdrc musb-hdrc: USB OTG mode controller at c8be4000 using DMA, IRQ 218 [ 20.368164] cfg80211: Calling CRDA for country: DE [ 20.982696] cfg80211: Regulatory domain changed to country: DE [ 20.994720] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.010223] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.024139] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.038208] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 21.052062] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 21.094635] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.757873] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 1) [ 22.776733] wlan0: authenticated [ 22.779022] wlan0: associate with 00:1d:0f:b9:df:2d (try 1) [ 22.801055] wlan0: RX AssocResp from 00:1d:0f:b9:df:2d (capab=0x411 status=0 aid=3) [ 22.801116] wlan0: associated [ 22.811584] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 22.855529] cfg80211: Calling CRDA for country: DE [ 23.150695] cfg80211: Regulatory domain changed to country: DE [ 23.195037] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.245025] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 23.278869] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 23.320068] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 23.349334] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 1182.077880] cfg80211: Calling CRDA to update world regulatory domain [ 1182.205261] cfg80211: World regulatory domain updated: [ 1182.211517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1182.222381] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1182.232482] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1182.241577] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1182.251129] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1182.260528] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1182.269927] cfg80211: Calling CRDA for country: DE [ 1182.369659] cfg80211: Regulatory domain changed to country: DE [ 1182.376586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1182.386138] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1182.395385] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1182.404449] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1182.413146] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 1182.821472] ------------[ cut here ]------------ [ 1182.826599] WARNING: at /home/mb/develop/svn/openwrt_n810/trunk/build_dir/linux-omap24xx/compat-wireless-2011-02-25/net/mac80211/scan.c:310 ieee80211_rx_bss_free+0x20c/0x4b8 [mac80211]() [ 1182.845275] Modules linked in: leds_gpio musb_hdrc tahvo_usb nop_usb_xceiv ip6t_REJECT ip6t_LOG ip6t_rt ip6t_hbh ip6t_mh ip6t_ipv6header ip6t_frag ip6t_eui64 ip6t_ah ip6table_raw ip6_queue ip6table_mangle ip6table_filter ip6_tables nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_recent xt_helper xt_conntrack xt_connmark xt_connbytes xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables p54spi tun snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd_page_alloc snd soundcore ppp_async ppp_generic slhc p54common lockd sunrpc mac80211 usbcore exportfs cfg80211 compat arc4 n810bm ecb [ 1182.929046] [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_common+0x4c/0x64) [ 1182.939788] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x18/0x1c) [ 1182.951171] [] (warn_slowpath_null+0x18/0x1c) from [] (ieee80211_rx_bss_free+0x20c/0x4b8 [mac80211]) [ 1182.963623] [] (ieee80211_rx_bss_free+0x20c/0x4b8 [mac80211]) from [] (process_one_work+0x220/0x374) [ 1182.975891] [] (process_one_work+0x220/0x374) from [] (worker_thread+0x1e4/0x310) [ 1182.986663] [] (worker_thread+0x1e4/0x310) from [] (kthread+0x80/0x88) [ 1182.996154] [] (kthread+0x80/0x88) from [] (kernel_thread_exit+0x0/0x8) [ 1183.005676] ---[ end trace 9161f9fa8f376438 ]--- [ 1184.886108] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 1) [ 1184.902191] wlan0: authenticated [ 1184.903198] wlan0: associate with 00:1d:0f:b9:df:2d (try 1) [ 1184.909210] wlan0: RX ReassocResp from 00:1d:0f:b9:df:2d (capab=0x411 status=0 aid=3) [ 1184.909271] wlan0: associated [ 1184.917022] cfg80211: Calling CRDA for country: DE [ 1185.019226] cfg80211: Regulatory domain changed to country: DE [ 1185.026153] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1185.035675] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1185.044311] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1185.053253] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1185.061920] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 1215.072723] cfg80211: Calling CRDA to update world regulatory domain [ 1215.197235] cfg80211: World regulatory domain updated: [ 1215.203430] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1215.212951] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1215.223632] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1215.233734] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1215.243377] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1215.252777] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1215.262237] cfg80211: Calling CRDA for country: DE [ 1215.362762] cfg80211: Regulatory domain changed to country: DE [ 1215.369689] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1215.379211] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1215.388427] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1215.397735] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1215.407806] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 1217.073699] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 1) [ 1217.090820] wlan0: authenticated [ 1217.091827] wlan0: associate with 00:1d:0f:b9:df:2d (try 1) [ 1217.280883] wlan0: associate with 00:1d:0f:b9:df:2d (try 2) [ 1217.284332] wlan0: RX ReassocResp from 00:1d:0f:b9:df:2d (capab=0x411 status=0 aid=3) [ 1217.284362] wlan0: associated [ 1217.292510] cfg80211: Calling CRDA for country: DE [ 1217.395324] cfg80211: Regulatory domain changed to country: DE [ 1217.402282] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1217.411834] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1217.421020] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1217.431732] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1217.440765] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 1220.415222] wlan0: deauthenticated from 00:1d:0f:b9:df:2d (Reason: 2) [ 1220.418029] cfg80211: Calling CRDA to update world regulatory domain [ 1220.525299] cfg80211: World regulatory domain updated: [ 1220.531951] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1220.542022] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1220.551422] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1220.560760] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1220.571319] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1220.581420] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1220.591766] cfg80211: Calling CRDA for country: DE [ 1220.690551] cfg80211: Regulatory domain changed to country: DE [ 1220.697509] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1220.708374] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1220.718048] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1220.727264] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1220.736602] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 1221.151580] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 1) [ 1221.343414] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 2) [ 1221.538696] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 3) [ 1221.734008] wlan0: authentication with 00:1d:0f:b9:df:2d timed out [ 1222.464202] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 1) [ 1222.655914] wlan0: authenticate with 00:1d:0f:b9:df:2d (try 2) [ 1222.658386] wlan0: authenticated [ 1222.659423] wlan0: associate with 00:1d:0f:b9:df:2d (try 1) [ 1222.666900] wlan0: RX ReassocResp from 00:1d:0f:b9:df:2d (capab=0x411 status=0 aid=3) [ 1222.666961] wlan0: associated [ 1222.674560] cfg80211: Calling CRDA for country: DE [ 1222.777038] cfg80211: Regulatory domain changed to country: DE [ 1222.783996] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1222.793487] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1222.802429] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1222.811126] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1222.819763] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) -- Greetings, Michael.