Return-path: Received: from mail-ey0-f174.google.com ([209.85.215.174]:56339 "EHLO mail-ey0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932688Ab1ERQWA (ORCPT ); Wed, 18 May 2011 12:22:00 -0400 Received: by eyx24 with SMTP id 24so493600eyx.19 for ; Wed, 18 May 2011 09:21:57 -0700 (PDT) From: Stevie Trujillo To: linux-wireless@vger.kernel.org Subject: iwlagn: 2.6.38.6 memory corruption when unloading module? Date: Wed, 18 May 2011 18:21:49 +0200 MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_dI/0NlIKhSVqAJm" Message-Id: <201105181821.49508.stevie.trujillo@gmail.com> (sfid-20110518_182209_631877_308A45E2) Sender: linux-wireless-owner@vger.kernel.org List-ID: --Boundary-00=_dI/0NlIKhSVqAJm Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello, I have a Dell-XPS 15 with a Intel(R) Centrino(R) Wireless-N 1030 BGN card. Doing modprobe -r iwlagn; modprobe iwlagn makes my kernel crash (sometimes I have to repeat it). I managed to get a backtrace (the file "dmesg-kexec.txt" attached) with the advice of Milton Miller. I also tried to boot with slub_debug=FZ (not exactly sure what that does) - dmesg attached in "dmesg-slub_debug.txt". -- Stevie Trujillo --Boundary-00=_dI/0NlIKhSVqAJm Content-Type: text/plain; charset="us-ascii"; name="dmesg-slub_debug.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg-slub_debug.txt" [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38.6-dbg (root@cnulaptop) (gcc version 4.4= =2E5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 SMP Wed May 18 17:39:58 CEST 2011 [ 0.000000] Command line: root=3D/dev/sda6 crashkernel=3D160M mem=3D512M= slub_debug=3DFZ [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable) [ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bacac000 (reserved) [ 0.000000] BIOS-e820: 00000000bacac000 - 00000000bacba000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bacba000 - 00000000badfa000 (reserved) [ 0.000000] BIOS-e820: 00000000badfa000 - 00000000badfc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badfc000 - 00000000badfe000 (reserved) [ 0.000000] BIOS-e820: 00000000badfe000 - 00000000bae01000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae01000 - 00000000bae04000 (reserved) [ 0.000000] BIOS-e820: 00000000bae04000 - 00000000bae05000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae05000 - 00000000bae0a000 (reserved) [ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved) [ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) [ 0.000000] e820 remove range: 0000000020000000 - ffffffffffffffff (usab= le) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] user-defined physical RAM map: [ 0.000000] user: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] user: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] user: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] user: 00000000bac8f000 - 00000000bacac000 (reserved) [ 0.000000] user: 00000000bacac000 - 00000000bacba000 (ACPI NVS) [ 0.000000] user: 00000000bacba000 - 00000000badfa000 (reserved) [ 0.000000] user: 00000000badfa000 - 00000000badfc000 (ACPI NVS) [ 0.000000] user: 00000000badfc000 - 00000000badfe000 (reserved) [ 0.000000] user: 00000000badfe000 - 00000000bae01000 (ACPI NVS) [ 0.000000] user: 00000000bae01000 - 00000000bae04000 (reserved) [ 0.000000] user: 00000000bae04000 - 00000000bae05000 (ACPI NVS) [ 0.000000] user: 00000000bae05000 - 00000000bae0a000 (reserved) [ 0.000000] user: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) [ 0.000000] user: 00000000bae1b000 - 00000000baf18000 (reserved) [ 0.000000] user: 00000000baf18000 - 00000000baf1c000 (ACPI NVS) [ 0.000000] user: 00000000baf1c000 - 00000000baf1f000 (reserved) [ 0.000000] user: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) [ 0.000000] user: 00000000baf9f000 - 00000000bafff000 (ACPI data) [ 0.000000] user: 00000000bb000000 - 00000000bfa00000 (reserved) [ 0.000000] user: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] user: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] user: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] user: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] user: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] user: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] user: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. Dell System XPS L502X/0YR8NN, BIOS A= 04 03/25/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usab= le) =3D=3D> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usab= le) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn =3D 0x20000 max_arch_pfn =3D 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x701060007= 0106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] 0000000000 - 0020000000 page 2M [ 0.000000] kernel direct mapping tables up to 20000000 @ 1fffe000-20000= 000 [ 0.000000] Reserving 160MB of memory at 352MB for crashkernel (System R= AM: 512MB) [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09 00000= 002 LOHR 00000002) [ 0.000000] ACPI: FACP 00000000bafef000 000F4 (v03 DELL QA09 00000= 002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000baff2000 08C85 (v02 DELL SNB-CPT 00000= 000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000baf3f000 00040 [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000= 002 LOHR 00000001) [ 0.000000] ACPI: SSDT 00000000baffb000 01068 (v01 DELL PtidDevc 00001= 000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000baff1000 000A5 (v32 DELL QA09 00000= 002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000bafee000 00038 (v01 DELL QA09 00000= 002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000bafed000 00098 (v01 DELL QA09 00000= 002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000bafec000 0003C (v01 DELL QA09 00000= 002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000bafea000 01217 (v01 NvORef NvOptTbl 00001= 000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafe9000 00804 (v01 PmRef Cpu0Ist 00003= 000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bafe8000 00996 (v01 PmRef CpuPm 00003= 000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000bafe7000 0003E (v01 DELL QA09 00000= 002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000= 001 PTL 00000001) [ 0.000000] ACPI: DMAR 00000000bafe5000 000E8 (v01 INTEL SNB 00000= 001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000bafe4000 0026A (v01 DELL QA09 00000= 002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880014e0000= 0-ffff8800155fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] On node 0 totalpages: 130957 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1736 pages used for memmap [ 0.000000] DMA32 zone: 125240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-= 23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000= 9e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000= a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000= e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000001= 00000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000= :9ac8f000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_= node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880015c00000 s74880 r8192= d23424 u262144 [ 0.000000] pcpu-alloc: s74880 r8192 d23424 u262144 alloc=3D1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7=20 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota= l pages: 129159 [ 0.000000] Kernel command line: root=3D/dev/sda6 crashkernel=3D160M mem= =3D512M slub_debug=3DFZ [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 byt= es) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 byte= s) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Queued invalidation will be enabled to support x2apic and In= tr-remapping. [ 0.000000] Memory: 342504k/524288k available (3495k kernel code, 460k a= bsent, 181324k reserved, 2945k data, 428k init) [ 0.000000] SLUB: Genslabs=3D15, HWalign=3D64, Order=3D0-3, MinObjects= =3D0, CPUs=3D8, Nodes=3D1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2593.548 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using tim= er frequency.. 5187.09 BogoMIPS (lpj=3D2593548) [ 0.000191] pid_max: default: 32768 minimum: 301 [ 0.000334] Mount-cache hash table entries: 256 [ 0.000561] Initializing cgroup subsys ns [ 0.000654] ns_cgroup deprecated: consider using the 'clone_children' fl= ag without the ns_cgroup. [ 0.000814] Initializing cgroup subsys cpuacct [ 0.000910] Initializing cgroup subsys freezer [ 0.001032] CPU: Physical Processor ID: 0 [ 0.001125] CPU: Processor Core ID: 0 [ 0.001219] mce: CPU supports 7 MCE banks [ 0.001317] CPU0: Thermal monitoring handled by SMI [ 0.001322] using mwait in idle threads. [ 0.001461] ACPI: Core revision 20110112 [ 0.071378] DMAR: Host address width 36 [ 0.071472] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.071572] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 e= cap f0101a [ 0.071728] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.071826] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 e= cap f0105a [ 0.071972] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff [ 0.072070] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff [ 0.072168] DMAR: No ATSR found [ 0.072329] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.072425] HPET id 0 under DRHD base 0xfed91000 [ 0.072519] HPET id 0 under DRHD base 0xfed91000 [ 0.073947] HPET id 0 under DRHD base 0xfed91000 [ 0.074041] HPET id 0 under DRHD base 0xfed91000 [ 0.074134] HPET id 0 under DRHD base 0xfed91000 [ 0.074228] HPET id 0 under DRHD base 0xfed91000 [ 0.074322] HPET id 0 under DRHD base 0xfed91000 [ 0.074415] HPET id 0 under DRHD base 0xfed91000 [ 0.074750] Enabled Interrupt-remapping [ 0.074864] Setting APIC routing to flat [ 0.075333] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D= =2D1 [ 0.085409] CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz stepping 07 [ 0.186422] Performance Events: PEBS fmt1+, generic architected perfmon,= Intel PMU driver. [ 0.186690] ... version: 3 [ 0.186782] ... bit width: 48 [ 0.186875] ... generic registers: 4 [ 0.186969] ... value mask: 0000ffffffffffff [ 0.187064] ... max period: 000000007fffffff [ 0.187160] ... fixed-purpose events: 3 [ 0.187253] ... event mask: 000000070000000f [ 0.187484] Booting Node 0, Processors #1 [ 0.258297] CPU1: Thermal monitoring handled by SMI [ 0.278406] #2 [ 0.349113] CPU2: Thermal monitoring handled by SMI [ 0.369221] #3 [ 0.439929] CPU3: Thermal monitoring handled by SMI [ 0.459974] Brought up 4 CPUs [ 0.460154] Total of 4 processors activated (20749.74 BogoMIPS). [ 0.461937] PM: Adding info for No Bus:platform [ 0.462353] Time: 18:03:11 Date: 05/18/11 [ 0.462493] NET: Registered protocol family 16 [ 0.462751] PM: Adding info for No Bus:vtcon0 [ 0.462785] ACPI: bus type pci registered [ 0.462934] PM: Adding info for No Bus:id [ 0.463001] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000= =2D0xfbffffff] (base 0xf8000000) [ 0.463151] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.466850] PCI: Using configuration type 1 for base access [ 0.470351] PM: Adding info for No Bus:default [ 0.470404] bio: create slab at 0 [ 0.471995] ACPI: EC: Look up EC in DSDT [ 0.473553] ACPI: Executed 1 blocks of module-level executable AML code [ 0.493945] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.496001] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst 00003= 001 INTL 20061109) [ 0.496785] ACPI: Dynamic OEM Table Load: [ 0.496960] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003= 001 INTL 20061109) [ 0.500986] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst 00003= 000 INTL 20061109) [ 0.501945] ACPI: Dynamic OEM Table Load: [ 0.502117] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003= 000 INTL 20061109) [ 0.505245] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst 00003= 000 INTL 20061109) [ 0.505950] ACPI: Dynamic OEM Table Load: [ 0.506122] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003= 000 INTL 20061109) [ 0.514338] ACPI: Interpreter enabled [ 0.514432] ACPI: (supports S0 S3 S4 S5) [ 0.514755] ACPI: Using IOAPIC for interrupt routing [ 0.515026] PM: Adding info for acpi:LNXSYSTM:00 [ 0.515101] PM: Adding info for acpi:LNXCPU:00 [ 0.515178] PM: Adding info for acpi:LNXCPU:01 [ 0.515247] PM: Adding info for acpi:LNXCPU:02 [ 0.515315] PM: Adding info for acpi:LNXCPU:03 [ 0.515387] PM: Adding info for acpi:LNXCPU:04 [ 0.515456] PM: Adding info for acpi:LNXCPU:05 [ 0.515523] PM: Adding info for acpi:LNXCPU:06 [ 0.515591] PM: Adding info for acpi:LNXCPU:07 [ 0.515717] PM: Adding info for acpi:device:00 [ 0.515863] PM: Adding info for acpi:PNP0C14:00 [ 0.516039] PM: Adding info for acpi:PNP0A08:00 [ 0.516520] PM: Adding info for acpi:device:01 [ 0.516643] PM: Adding info for acpi:device:02 [ 0.516771] PM: Adding info for acpi:PNP0200:00 [ 0.517040] PM: Adding info for acpi:PNP0103:00 [ 0.517163] PM: Adding info for acpi:PNP0000:00 [ 0.517279] PM: Adding info for acpi:PNP0C04:00 [ 0.517402] PM: Adding info for acpi:PNP0C02:00 [ 0.517514] PM: Adding info for acpi:PNP0B00:00 [ 0.517631] PM: Adding info for acpi:PNP0100:00 [ 0.517833] PM: Adding info for acpi:INT3F0D:00 [ 0.518005] PM: Adding info for acpi:PNP0C09:00 [ 0.518323] PM: Adding info for acpi:PNP0303:00 [ 0.518613] PM: Adding info for acpi:DLL04B6:00 [ 0.518724] PM: Adding info for acpi:PNP0C02:01 [ 0.519261] PM: Adding info for acpi:device:03 [ 0.519360] PM: Adding info for acpi:device:04 [ 0.519458] PM: Adding info for acpi:device:05 [ 0.519552] PM: Adding info for acpi:device:06 [ 0.519647] PM: Adding info for acpi:device:07 [ 0.519740] PM: Adding info for acpi:device:08 [ 0.519836] PM: Adding info for acpi:device:09 [ 0.519972] PM: Adding info for acpi:device:0a [ 0.520063] PM: Adding info for acpi:device:0b [ 0.520156] PM: Adding info for acpi:device:0c [ 0.520246] PM: Adding info for acpi:device:0d [ 0.520338] PM: Adding info for acpi:device:0e [ 0.520860] PM: Adding info for acpi:device:0f [ 0.520954] PM: Adding info for acpi:device:10 [ 0.521042] PM: Adding info for acpi:device:11 [ 0.521130] PM: Adding info for acpi:device:12 [ 0.521223] PM: Adding info for acpi:device:13 [ 0.521312] PM: Adding info for acpi:device:14 [ 0.521400] PM: Adding info for acpi:device:15 [ 0.521483] PM: Adding info for acpi:device:16 [ 0.521569] PM: Adding info for acpi:device:17 [ 0.521651] PM: Adding info for acpi:device:18 [ 0.522044] PM: Adding info for acpi:device:19 [ 0.522429] PM: Adding info for acpi:device:1a [ 0.522543] PM: Adding info for acpi:device:1b [ 0.522930] PM: Adding info for acpi:device:1c [ 0.523043] PM: Adding info for acpi:device:1d [ 0.523422] PM: Adding info for acpi:device:1e [ 0.523533] PM: Adding info for acpi:device:1f [ 0.523957] PM: Adding info for acpi:device:20 [ 0.524189] PM: Adding info for acpi:device:21 [ 0.524706] PM: Adding info for acpi:device:22 [ 0.524931] PM: Adding info for acpi:device:23 [ 0.525119] PM: Adding info for acpi:device:24 [ 0.525302] PM: Adding info for acpi:device:25 [ 0.525484] PM: Adding info for acpi:device:26 [ 0.525663] PM: Adding info for acpi:device:27 [ 0.525848] PM: Adding info for acpi:device:28 [ 0.526378] PM: Adding info for acpi:device:29 [ 0.526593] PM: Adding info for acpi:device:2a [ 0.527142] PM: Adding info for acpi:device:2b [ 0.527359] PM: Adding info for acpi:device:2c [ 0.527906] PM: Adding info for acpi:device:2d [ 0.528123] PM: Adding info for acpi:device:2e [ 0.528302] PM: Adding info for acpi:device:2f [ 0.528475] PM: Adding info for acpi:device:30 [ 0.528652] PM: Adding info for acpi:device:31 [ 0.528827] PM: Adding info for acpi:device:32 [ 0.529066] PM: Adding info for acpi:device:33 [ 0.529362] PM: Adding info for acpi:LNXVIDEO:00 [ 0.529618] PM: Adding info for acpi:LNXVIDEO:01 [ 0.529867] PM: Adding info for acpi:device:34 [ 0.530106] PM: Adding info for acpi:device:35 [ 0.530344] PM: Adding info for acpi:device:36 [ 0.530579] PM: Adding info for acpi:device:37 [ 0.530818] PM: Adding info for acpi:device:38 [ 0.531054] PM: Adding info for acpi:device:39 [ 0.531290] PM: Adding info for acpi:device:3a [ 0.531524] PM: Adding info for acpi:device:3b [ 0.531772] PM: Adding info for acpi:SMO8800:00 [ 0.532104] PM: Adding info for acpi:PNP0C0F:00 [ 0.532374] PM: Adding info for acpi:PNP0C0F:01 [ 0.532638] PM: Adding info for acpi:PNP0C0F:02 [ 0.532905] PM: Adding info for acpi:PNP0C0F:03 [ 0.533161] PM: Adding info for acpi:PNP0C0F:04 [ 0.533416] PM: Adding info for acpi:PNP0C0F:05 [ 0.533670] PM: Adding info for acpi:PNP0C0F:06 [ 0.533929] PM: Adding info for acpi:PNP0C0F:07 [ 0.534086] PM: Adding info for acpi:PNP0C0C:00 [ 0.534241] PM: Adding info for acpi:PNP0C0E:00 [ 0.535360] PM: Adding info for acpi:PNP0C0D:00 [ 0.535516] PM: Adding info for acpi:ACPI0003:00 [ 0.535784] PM: Adding info for acpi:PNP0C0A:00 [ 0.535980] PM: Adding info for acpi:INT340E:00 [ 0.536127] PM: Adding info for acpi:device:3c [ 0.536200] PM: Adding info for acpi:LNXTHERM:00 [ 0.536272] PM: Adding info for acpi:LNXTHERM:01 [ 0.536435] PM: Adding info for acpi:LNXPWRBN:00 [ 0.536633] ACPI: EC: GPE =3D 0x17, I/O: command/status =3D 0x66, data = =3D 0x62 [ 0.540374] ACPI: No dock devices found. [ 0.540468] PCI: Using host bridge windows from ACPI; if necessary, use = "pci=3Dnocrs" and report a bug [ 0.542440] \_SB_.PCI0:_OSC invalid UUID [ 0.542444] _OSC request data:1 8 1f=20 [ 0.542447] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.542561] PM: Adding info for No Bus:pci0000:00 [ 0.542578] PM: Adding info for No Bus:0000:00 [ 0.545713] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.545812] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.545910] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x00= 0bffff] [ 0.546056] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfe= afffff] [ 0.546203] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfe= d44fff] [ 0.546358] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.546379] pci 0000:00:00.0: rpm_resume flags 0x0 [ 0.546380] pci 0000:00:00.0: rpm_resume returns -11 [ 0.546392] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.546411] pci 0000:00:01.0: rpm_resume flags 0x0 [ 0.546413] pci 0000:00:01.0: rpm_resume returns -11 [ 0.546416] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.546419] pci 0000:00:01.0: PME# disabled [ 0.546436] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 [ 0.546445] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] [ 0.546451] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit p= ref] [ 0.546455] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] [ 0.546468] pci 0000:00:02.0: rpm_resume flags 0x0 [ 0.546469] pci 0000:00:02.0: rpm_resume returns -11 [ 0.546505] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.546528] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit] [ 0.546584] pci 0000:00:16.0: rpm_resume flags 0x0 [ 0.546586] pci 0000:00:16.0: rpm_resume returns -11 [ 0.546592] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.546596] pci 0000:00:16.0: PME# disabled [ 0.546628] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.546649] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff] [ 0.546718] pci 0000:00:1a.0: rpm_resume flags 0x0 [ 0.546720] pci 0000:00:1a.0: rpm_resume returns -11 [ 0.546726] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.546730] pci 0000:00:1a.0: PME# disabled [ 0.546754] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.546769] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit] [ 0.546820] pci 0000:00:1b.0: rpm_resume flags 0x0 [ 0.546821] pci 0000:00:1b.0: rpm_resume returns -11 [ 0.546827] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.546831] pci 0000:00:1b.0: PME# disabled [ 0.546855] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.546939] pci 0000:00:1c.0: rpm_resume flags 0x0 [ 0.546941] pci 0000:00:1c.0: rpm_resume returns -11 [ 0.546959] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.546964] pci 0000:00:1c.0: PME# disabled [ 0.546998] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.547085] pci 0000:00:1c.1: rpm_resume flags 0x0 [ 0.547087] pci 0000:00:1c.1: rpm_resume returns -11 [ 0.547105] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.547110] pci 0000:00:1c.1: PME# disabled [ 0.547144] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.547226] pci 0000:00:1c.3: rpm_resume flags 0x0 [ 0.547228] pci 0000:00:1c.3: rpm_resume returns -11 [ 0.547246] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.547251] pci 0000:00:1c.3: PME# disabled [ 0.547281] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.547332] pci 0000:00:1c.4: rpm_resume flags 0x0 [ 0.547334] pci 0000:00:1c.4: rpm_resume returns -11 [ 0.547346] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.547350] pci 0000:00:1c.4: PME# disabled [ 0.547374] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.547425] pci 0000:00:1c.5: rpm_resume flags 0x0 [ 0.547427] pci 0000:00:1c.5: rpm_resume returns -11 [ 0.547438] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.547442] pci 0000:00:1c.5: PME# disabled [ 0.547472] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.547492] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff] [ 0.547559] pci 0000:00:1d.0: rpm_resume flags 0x0 [ 0.547561] pci 0000:00:1d.0: rpm_resume returns -11 [ 0.547567] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.547571] pci 0000:00:1d.0: PME# disabled [ 0.547596] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 [ 0.547683] pci 0000:00:1f.0: rpm_resume flags 0x0 [ 0.547684] pci 0000:00:1f.0: rpm_resume returns -11 [ 0.547714] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.547732] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] [ 0.547739] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] [ 0.547747] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] [ 0.547755] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] [ 0.547763] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] [ 0.547770] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff] [ 0.547797] pci 0000:00:1f.2: rpm_resume flags 0x0 [ 0.547798] pci 0000:00:1f.2: rpm_resume returns -11 [ 0.547807] pci 0000:00:1f.2: PME# supported from D3hot [ 0.547810] pci 0000:00:1f.2: PME# disabled [ 0.547829] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.547845] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit] [ 0.547865] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.547884] pci 0000:00:1f.3: rpm_resume flags 0x0 [ 0.547886] pci 0000:00:1f.3: rpm_resume returns -11 [ 0.547919] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300 [ 0.547927] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.547935] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit p= ref] [ 0.547943] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit p= ref] [ 0.547949] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] [ 0.547955] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 0.547968] pci 0000:01:00.0: rpm_resume flags 0x0 [ 0.547970] pci 0000:01:00.0: rpm_resume returns -11 [ 0.549713] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.549855] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.549857] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.549860] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff= 64bit pref] [ 0.549932] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.550031] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disab= led) [ 0.550036] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff= ] (disabled) [ 0.550044] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff= pref] (disabled) [ 0.550268] pci 0000:03:00.0: [8086:008a] type 0 class 0x000280 [ 0.550414] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit] [ 0.550963] pci 0000:03:00.0: rpm_resume flags 0x0 [ 0.550964] pci 0000:03:00.0: rpm_resume returns -11 [ 0.551019] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.551053] pci 0000:03:00.0: PME# disabled [ 0.552836] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.552935] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disab= led) [ 0.552940] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.552949] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff= pref] (disabled) [ 0.553093] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 [ 0.553119] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit] [ 0.553218] pci 0000:04:00.0: rpm_resume flags 0x0 [ 0.553219] pci 0000:04:00.0: rpm_resume returns -11 [ 0.553228] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.553233] pci 0000:04:00.0: PME# disabled [ 0.554759] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.554880] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disab= led) [ 0.554884] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.554891] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff= pref] (disabled) [ 0.554935] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.555032] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disab= led) [ 0.555037] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.555043] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff= pref] (disabled) [ 0.555108] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200 [ 0.555128] pci 0000:06:00.0: reg 10: [io 0x2000-0x20ff] [ 0.555162] pci 0000:06:00.0: reg 18: [mem 0xf1804000-0xf1804fff 64bit p= ref] [ 0.555184] pci 0000:06:00.0: reg 20: [mem 0xf1800000-0xf1803fff 64bit p= ref] [ 0.555237] pci 0000:06:00.0: rpm_resume flags 0x0 [ 0.555239] pci 0000:06:00.0: rpm_resume returns -11 [ 0.555248] pci 0000:06:00.0: supports D1 D2 [ 0.555249] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.555254] pci 0000:06:00.0: PME# disabled [ 0.556706] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.556845] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.556849] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff= ] (disabled) [ 0.556855] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff= 64bit pref] [ 0.556889] pci_bus 0000:00: on NUMA node 0 [ 0.556894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.557608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.557777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.557953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.558126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.558360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.558571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.558909] \_SB_.PCI0:_OSC invalid UUID [ 0.558912] _OSC request data:1 1f 1f=20 [ 0.558916] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.559180] \_SB_.PCI0:_OSC invalid UUID [ 0.559183] _OSC request data:1 0 1d=20 [ 0.560372] PM: Adding info for pci:0000:00:00.0 [ 0.561585] PM: Adding info for pci:0000:00:01.0 [ 0.562791] PM: Adding info for pci:0000:00:02.0 [ 0.563985] PM: Adding info for pci:0000:00:16.0 [ 0.565176] PM: Adding info for pci:0000:00:1a.0 [ 0.566361] PM: Adding info for pci:0000:00:1b.0 [ 0.567539] PM: Adding info for pci:0000:00:1c.0 [ 0.568713] PM: Adding info for pci:0000:00:1c.1 [ 0.569890] PM: Adding info for pci:0000:00:1c.3 [ 0.571049] PM: Adding info for pci:0000:00:1c.4 [ 0.572203] PM: Adding info for pci:0000:00:1c.5 [ 0.573350] PM: Adding info for pci:0000:00:1d.0 [ 0.574492] PM: Adding info for pci:0000:00:1f.0 [ 0.575630] PM: Adding info for pci:0000:00:1f.2 [ 0.576763] PM: Adding info for pci:0000:00:1f.3 [ 0.576886] PM: Adding info for pci:0000:01:00.0 [ 0.576928] PM: Adding info for No Bus:0000:01 [ 0.576970] PM: Adding info for No Bus:0000:02 [ 0.577065] PM: Adding info for pci:0000:03:00.0 [ 0.577105] PM: Adding info for No Bus:0000:03 [ 0.577198] PM: Adding info for pci:0000:04:00.0 [ 0.577240] PM: Adding info for No Bus:0000:04 [ 0.577279] PM: Adding info for No Bus:0000:05 [ 0.577370] PM: Adding info for pci:0000:06:00.0 [ 0.577411] PM: Adding info for No Bus:0000:06 [ 0.577617] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14= 15) [ 0.578351] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14= 15) [ 0.579082] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14= 15) [ 0.579811] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14= 15) [ 0.580533] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 = 15) *0, disabled. [ 0.581385] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 = 15) *0, disabled. [ 0.582246] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14= 15) [ 0.582974] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14= 15) [ 0.583690] PM: Adding info for No Bus:vga_arbiter [ 0.583727] vgaarb: device added: PCI:0000:00:02.0,decodes=3Dio+mem,owns= =3Dio+mem,locks=3Dnone [ 0.583906] vgaarb: device added: PCI:0000:01:00.0,decodes=3Dio+mem,owns= =3Dnone,locks=3Dnone [ 0.584062] vgaarb: loaded [ 0.584336] SCSI subsystem initialized [ 0.584509] libata version 3.00 loaded. [ 0.584586] usbcore: registered new interface driver usbfs [ 0.584730] usbcore: registered new interface driver hub [ 0.584865] usbcore: registered new device driver usb [ 0.585077] PCI: Using ACPI for IRQ routing [ 0.585171] PCI: pci_cache_line_size set to 64 bytes [ 0.585423] reserve RAM buffer: 000000000009d800 - 000000000009ffff=20 [ 0.585509] PM: Adding info for No Bus:lo [ 0.585674] PM: Adding info for platform:regulatory.0 [ 0.585706] cfg80211: Calling CRDA to update world regulatory domain [ 0.586003] PM: Adding info for No Bus:rfkill [ 0.586039] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.586487] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.588634] Switching to clocksource hpet [ 0.588804] pnp: PnP ACPI init [ 0.588907] PM: Adding info for No Bus:pnp0 [ 0.588908] ACPI: bus type pnp registered [ 0.589618] Switched to NOHz mode on CPU #0 [ 0.589714] Switched to NOHz mode on CPU #3 [ 0.589717] Switched to NOHz mode on CPU #2 [ 0.589726] Switched to NOHz mode on CPU #1 [ 0.590765] pnp 00:00: [bus 00-3e] [ 0.590767] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.590769] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.590770] pnp 00:00: [io 0x0d00-0xffff window] [ 0.590772] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.590774] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.590776] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.590777] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.590785] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.590787] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.590789] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.590790] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.590794] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.590796] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.590797] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.590799] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.590801] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.590802] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.590804] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] [ 0.590806] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.590846] PM: Adding info for pnp:00:00 [ 0.590888] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (a= ctive) [ 0.590929] pnp 00:01: [io 0x0000-0x001f] [ 0.590931] pnp 00:01: [io 0x0081-0x0091] [ 0.590932] pnp 00:01: [io 0x0093-0x009f] [ 0.590933] pnp 00:01: [io 0x00c0-0x00df] [ 0.590935] pnp 00:01: [dma 4] [ 0.590958] PM: Adding info for pnp:00:01 [ 0.590995] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.591238] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.591261] PM: Adding info for pnp:00:02 [ 0.591297] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.591329] pnp 00:03: [io 0x00f0] [ 0.591337] pnp 00:03: [irq 13] [ 0.591360] PM: Adding info for pnp:00:03 [ 0.591396] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.591422] pnp 00:04: [io 0x002e-0x002f] [ 0.591424] pnp 00:04: [io 0x004e-0x004f] [ 0.591425] pnp 00:04: [io 0x0061] [ 0.591427] pnp 00:04: [io 0x0063] [ 0.591428] pnp 00:04: [io 0x0065] [ 0.591429] pnp 00:04: [io 0x0067] [ 0.591431] pnp 00:04: [io 0x0068] [ 0.591432] pnp 00:04: [io 0x006c] [ 0.591433] pnp 00:04: [io 0x0070] [ 0.591435] pnp 00:04: [io 0x0080] [ 0.591436] pnp 00:04: [io 0x0092] [ 0.591437] pnp 00:04: [io 0x00b2-0x00b3] [ 0.591439] pnp 00:04: [io 0x0680-0x069f] [ 0.591440] pnp 00:04: [io 0x1000-0x1003] [ 0.591442] pnp 00:04: [io 0x1004-0x1013] [ 0.591443] pnp 00:04: [io 0xffff] [ 0.591444] pnp 00:04: [io 0x0400-0x0453] [ 0.591446] pnp 00:04: [io 0x0458-0x047f] [ 0.591447] pnp 00:04: [io 0x0500-0x057f] [ 0.591449] pnp 00:04: [io 0x164e-0x164f] [ 0.591524] PM: Adding info for pnp:00:04 [ 0.591565] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.591663] system 00:04: [io 0x1000-0x1003] has been reserved [ 0.591763] system 00:04: [io 0x1004-0x1013] has been reserved [ 0.591871] system 00:04: [io 0xffff] has been reserved [ 0.591967] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.592064] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.592162] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.592259] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.592356] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.592382] pnp 00:05: [io 0x0070-0x0077] [ 0.592388] pnp 00:05: [irq 8] [ 0.592410] PM: Adding info for pnp:00:05 [ 0.592447] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.592544] pnp 00:06: [io 0x0454-0x0457] [ 0.592613] PM: Adding info for pnp:00:06 [ 0.592652] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.592750] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02= (active) [ 0.592871] pnp 00:07: [io 0x0060] [ 0.592872] pnp 00:07: [io 0x0064] [ 0.592878] pnp 00:07: [irq 1] [ 0.592901] PM: Adding info for pnp:00:07 [ 0.592939] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.593042] pnp 00:08: [irq 12] [ 0.593076] PM: Adding info for pnp:00:08 [ 0.593116] pnp 00:08: Plug and Play ACPI device, IDs DLL04b6 PNP0f13 (a= ctive) [ 0.593543] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.593545] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 0.593546] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.593548] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.593549] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 0.593551] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.593552] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 0.593554] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.593555] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.593557] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.593559] pnp 00:09: [mem 0xfffff000-0xffffffff] [ 0.593602] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it = overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.593799] PM: Adding info for pnp:00:09 [ 0.593843] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.593942] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.594040] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.594139] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.594237] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.594335] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.594434] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.594532] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.594632] system 00:09: [mem 0xff000000-0xffffffff] could not be reser= ved [ 0.594732] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reser= ved [ 0.594842] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.595278] pnp 00:0a: [irq 20] [ 0.595316] PM: Adding info for pnp:00:0a [ 0.595353] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) [ 0.595880] pnp: PnP ACPI: found 11 devices [ 0.595975] ACPI: ACPI bus type pnp unregistered [ 0.596129] PM: Adding info for No Bus:mem [ 0.596176] PM: Adding info for No Bus:kmem [ 0.596226] PM: Adding info for No Bus:null [ 0.596273] PM: Adding info for No Bus:port [ 0.596322] PM: Adding info for No Bus:zero [ 0.596370] PM: Adding info for No Bus:full [ 0.596420] PM: Adding info for No Bus:random [ 0.596469] PM: Adding info for No Bus:urandom [ 0.596517] PM: Adding info for No Bus:kmsg [ 0.596566] PM: Adding info for No Bus:oldmem [ 0.596616] PM: Adding info for No Bus:tty [ 0.596668] PM: Adding info for No Bus:console [ 0.596728] PM: Adding info for No Bus:tty0 [ 0.596828] PM: Adding info for No Bus:vcs [ 0.596876] PM: Adding info for No Bus:vcsa [ 0.596925] PM: Adding info for No Bus:vcs1 [ 0.596975] PM: Adding info for No Bus:vcsa1 [ 0.597033] PM: Adding info for No Bus:tty1 [ 0.597081] PM: Adding info for No Bus:tty2 [ 0.597130] PM: Adding info for No Bus:tty3 [ 0.597178] PM: Adding info for No Bus:tty4 [ 0.597228] PM: Adding info for No Bus:tty5 [ 0.597276] PM: Adding info for No Bus:tty6 [ 0.597328] PM: Adding info for No Bus:tty7 [ 0.597375] PM: Adding info for No Bus:tty8 [ 0.597427] PM: Adding info for No Bus:tty9 [ 0.597477] PM: Adding info for No Bus:tty10 [ 0.597528] PM: Adding info for No Bus:tty11 [ 0.597576] PM: Adding info for No Bus:tty12 [ 0.597626] PM: Adding info for No Bus:tty13 [ 0.597676] PM: Adding info for No Bus:tty14 [ 0.597724] PM: Adding info for No Bus:tty15 [ 0.597785] PM: Adding info for No Bus:tty16 [ 0.597833] PM: Adding info for No Bus:tty17 [ 0.597883] PM: Adding info for No Bus:tty18 [ 0.597932] PM: Adding info for No Bus:tty19 [ 0.597982] PM: Adding info for No Bus:tty20 [ 0.598029] PM: Adding info for No Bus:tty21 [ 0.598080] PM: Adding info for No Bus:tty22 [ 0.598128] PM: Adding info for No Bus:tty23 [ 0.598178] PM: Adding info for No Bus:tty24 [ 0.598229] PM: Adding info for No Bus:tty25 [ 0.598287] PM: Adding info for No Bus:tty26 [ 0.598336] PM: Adding info for No Bus:tty27 [ 0.598386] PM: Adding info for No Bus:tty28 [ 0.598452] PM: Adding info for No Bus:tty29 [ 0.598504] PM: Adding info for No Bus:tty30 [ 0.598554] PM: Adding info for No Bus:tty31 [ 0.598605] PM: Adding info for No Bus:tty32 [ 0.598653] PM: Adding info for No Bus:tty33 [ 0.598703] PM: Adding info for No Bus:tty34 [ 0.598753] PM: Adding info for No Bus:tty35 [ 0.598814] PM: Adding info for No Bus:tty36 [ 0.598868] PM: Adding info for No Bus:tty37 [ 0.598916] PM: Adding info for No Bus:tty38 [ 0.598967] PM: Adding info for No Bus:tty39 [ 0.599015] PM: Adding info for No Bus:tty40 [ 0.599068] PM: Adding info for No Bus:tty41 [ 0.599116] PM: Adding info for No Bus:tty42 [ 0.599167] PM: Adding info for No Bus:tty43 [ 0.599216] PM: Adding info for No Bus:tty44 [ 0.599266] PM: Adding info for No Bus:tty45 [ 0.599318] PM: Adding info for No Bus:tty46 [ 0.599371] PM: Adding info for No Bus:tty47 [ 0.599420] PM: Adding info for No Bus:tty48 [ 0.599472] PM: Adding info for No Bus:tty49 [ 0.599523] PM: Adding info for No Bus:tty50 [ 0.599573] PM: Adding info for No Bus:tty51 [ 0.599624] PM: Adding info for No Bus:tty52 [ 0.599678] PM: Adding info for No Bus:tty53 [ 0.599728] PM: Adding info for No Bus:tty54 [ 0.599791] PM: Adding info for No Bus:tty55 [ 0.599844] PM: Adding info for No Bus:tty56 [ 0.599894] PM: Adding info for No Bus:tty57 [ 0.599951] PM: Adding info for No Bus:tty58 [ 0.600002] PM: Adding info for No Bus:tty59 [ 0.600054] PM: Adding info for No Bus:tty60 [ 0.600104] PM: Adding info for No Bus:tty61 [ 0.600155] PM: Adding info for No Bus:tty62 [ 0.600213] PM: Adding info for No Bus:tty63 [ 0.604905] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff= 80000-0xffffffff pref] [ 0.605115] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff= pref] [ 0.605263] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.605359] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.605458] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] [ 0.605557] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff= 64bit pref] [ 0.605705] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.605810] pci 0000:00:1c.0: bridge window [io disabled] [ 0.605912] pci 0000:00:1c.0: bridge window [mem disabled] [ 0.606011] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 0.606115] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.606209] pci 0000:00:1c.1: bridge window [io disabled] [ 0.606309] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] [ 0.606410] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 0.606514] pci 0000:00:1c.3: PCI bridge to [bus 04-04] [ 0.606609] pci 0000:00:1c.3: bridge window [io disabled] [ 0.606710] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] [ 0.606819] pci 0000:00:1c.3: bridge window [mem pref disabled] [ 0.606923] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 0.607017] pci 0000:00:1c.4: bridge window [io disabled] [ 0.607116] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] [ 0.607217] pci 0000:00:1c.4: bridge window [mem pref disabled] [ 0.607317] pci 0000:00:1c.5: PCI bridge to [bus 06-06] [ 0.607413] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.607513] pci 0000:00:1c.5: bridge window [mem disabled] [ 0.607611] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff= 64bit pref] [ 0.607776] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.607876] pci 0000:00:01.0: setting latency timer to 64 [ 0.607882] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.607985] pci 0000:00:1c.0: setting latency timer to 64 [ 0.607996] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.608098] pci 0000:00:1c.1: setting latency timer to 64 [ 0.608109] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.608210] pci 0000:00:1c.3: setting latency timer to 64 [ 0.608217] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.608316] pci 0000:00:1c.4: setting latency timer to 64 [ 0.608323] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.608422] pci 0000:00:1c.5: setting latency timer to 64 [ 0.608426] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.608427] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.608429] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.608430] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] [ 0.608432] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.608434] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.608435] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] [ 0.608437] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit= pref] [ 0.608439] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] [ 0.608440] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff] [ 0.608442] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff] [ 0.608444] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.608445] pci_bus 0000:06: resource 2 [mem 0xf1800000-0xf18fffff 64bit= pref] [ 0.608476] NET: Registered protocol family 2 [ 0.608605] IP route cache hash table entries: 4096 (order: 3, 32768 byt= es) [ 0.608843] TCP established hash table entries: 16384 (order: 6, 262144 = bytes) [ 0.609024] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.609150] TCP: Hash tables configured (established 16384 bind 16384) [ 0.609248] TCP reno registered [ 0.609341] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.609439] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.609639] NET: Registered protocol family 1 [ 0.609756] pci 0000:00:02.0: Boot video device [ 0.610594] PCI: CLS 64 bytes, default 64 [ 0.610715] IOMMU 0 0xfed90000: using Queued invalidation [ 0.610820] IOMMU 1 0xfed91000: using Queued invalidation [ 0.610918] IOMMU: Setting RMRR: [ 0.611024] IOMMU: Setting identity map for device 0000:00:02.0 [0xbb800= 000 - 0xbfa00000] [ 0.611514] IOMMU: Setting identity map for device 0000:00:1d.0 [0xbae1d= 000 - 0xbae34000] [ 0.611683] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbae1d= 000 - 0xbae34000] [ 0.613189] IOMMU: Prepare 0-16MiB unity mapping for LPC [ 0.613296] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0= x1000000] [ 0.613718] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O [ 0.615028] PM: Adding info for No Bus:mcelog [ 0.615130] PM: Adding info for No Bus:msr0 [ 0.615180] PM: Adding info for No Bus:msr1 [ 0.615230] PM: Adding info for No Bus:msr2 [ 0.615279] PM: Adding info for No Bus:msr3 [ 0.615366] PM: Adding info for No Bus:cpu0 [ 0.615416] PM: Adding info for No Bus:cpu1 [ 0.615469] PM: Adding info for No Bus:cpu2 [ 0.615517] PM: Adding info for No Bus:cpu3 [ 0.615636] PM: Adding info for platform:pcspkr [ 0.615682] PM: Adding info for platform:microcode [ 0.615723] microcode: CPU0 sig=3D0x206a7, pf=3D0x10, revision=3D0x14 [ 0.615838] microcode: CPU1 sig=3D0x206a7, pf=3D0x10, revision=3D0x14 [ 0.615944] microcode: CPU2 sig=3D0x206a7, pf=3D0x10, revision=3D0x14 [ 0.616047] microcode: CPU3 sig=3D0x206a7, pf=3D0x10, revision=3D0x14 [ 0.616159] PM: Adding info for No Bus:microcode [ 0.616196] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.616533] PM: Adding info for No Bus:snapshot [ 0.623907] PM: Adding info for event_source:cpu [ 0.623960] PM: Adding info for event_source:breakpoint [ 0.624008] PM: Adding info for event_source:software [ 0.630354] VFS: Disk quotas dquot_6.5.2 [ 0.630525] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.630667] SGI XFS with ACLs, security attributes, large block/inode nu= mbers, no debug enabled [ 0.631897] SGI XFS Quota Management subsystem [ 0.631997] msgmni has been set to 668 [ 0.632457] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma= jor 253) [ 0.632604] io scheduler noop registered [ 0.632697] io scheduler deadline registered [ 0.632922] io scheduler cfq registered (default) [ 0.633128] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.633153] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 0.633170] PM: Adding info for pci_express:0000:00:01.0:pcie08 [ 0.633562] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.633658] intel_idle: MWAIT substates: 0x21120 [ 0.633659] intel_idle: v0.4 model 0x2A [ 0.633660] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.641050] PM: Adding info for No Bus:ptmx [ 0.641125] PM: Adding info for No Bus:hpet [ 0.641397] PM: Adding info for No Bus:nvram [ 0.641433] Non-volatile memory driver v1.3 [ 0.641631] PM: Adding info for No Bus:7:0 [ 0.641700] PM: Adding info for No Bus:loop0 [ 0.641768] PM: Adding info for No Bus:7:1 [ 0.641819] PM: Adding info for No Bus:loop1 [ 0.641886] PM: Adding info for No Bus:7:2 [ 0.641935] PM: Adding info for No Bus:loop2 [ 0.641998] PM: Adding info for No Bus:7:3 [ 0.642050] PM: Adding info for No Bus:loop3 [ 0.642113] PM: Adding info for No Bus:7:4 [ 0.642164] PM: Adding info for No Bus:loop4 [ 0.642228] PM: Adding info for No Bus:7:5 [ 0.642279] PM: Adding info for No Bus:loop5 [ 0.642358] PM: Adding info for No Bus:7:6 [ 0.642412] PM: Adding info for No Bus:loop6 [ 0.642474] PM: Adding info for No Bus:7:7 [ 0.642522] PM: Adding info for No Bus:loop7 [ 0.642573] loop: module loaded [ 0.642837] ahci 0000:00:1f.2: version 3.0 [ 0.642847] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.642977] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.643002] ahci: SSS flag set, parallel bus scan disabled [ 0.654710] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x= 13 impl SATA mode [ 0.654891] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio= slum part ems sxs apst=20 [ 0.655044] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.659754] PM: Adding info for No Bus:ata1 [ 0.659795] PM: Adding info for No Bus:ata1 [ 0.659847] PM: Adding info for No Bus:link1 [ 0.659863] PM: Adding info for No Bus:link1 [ 0.659909] PM: Adding info for No Bus:dev1.0 [ 0.659925] PM: Adding info for No Bus:dev1.0 [ 0.659973] PM: Adding info for No Bus:ata2 [ 0.659990] PM: Adding info for No Bus:ata2 [ 0.660036] PM: Adding info for No Bus:link2 [ 0.660052] PM: Adding info for No Bus:link2 [ 0.660100] PM: Adding info for No Bus:dev2.0 [ 0.660115] PM: Adding info for No Bus:dev2.0 [ 0.660163] PM: Adding info for No Bus:ata3 [ 0.660179] PM: Adding info for No Bus:ata3 [ 0.660223] PM: Adding info for No Bus:link3 [ 0.660237] PM: Adding info for No Bus:link3 [ 0.660283] PM: Adding info for No Bus:dev3.0 [ 0.660296] PM: Adding info for No Bus:dev3.0 [ 0.660347] PM: Adding info for No Bus:ata4 [ 0.660360] PM: Adding info for No Bus:ata4 [ 0.660406] PM: Adding info for No Bus:link4 [ 0.660420] PM: Adding info for No Bus:link4 [ 0.660467] PM: Adding info for No Bus:dev4.0 [ 0.660481] PM: Adding info for No Bus:dev4.0 [ 0.660531] PM: Adding info for No Bus:ata5 [ 0.660544] PM: Adding info for No Bus:ata5 [ 0.660591] PM: Adding info for No Bus:link5 [ 0.660604] PM: Adding info for No Bus:link5 [ 0.660662] PM: Adding info for No Bus:dev5.0 [ 0.660676] PM: Adding info for No Bus:dev5.0 [ 0.660731] PM: Adding info for No Bus:ata6 [ 0.660744] PM: Adding info for No Bus:ata6 [ 0.660792] PM: Adding info for No Bus:link6 [ 0.660813] PM: Adding info for No Bus:link6 [ 0.660861] PM: Adding info for No Bus:dev6.0 [ 0.660875] PM: Adding info for No Bus:dev6.0 [ 0.660933] scsi0 : ahci [ 0.661172] PM: Adding info for scsi:host0 [ 0.661231] PM: Adding info for No Bus:host0 [ 0.661289] scsi1 : ahci [ 0.661392] PM: Adding info for scsi:host1 [ 0.661447] PM: Adding info for No Bus:host1 [ 0.661503] scsi2 : ahci [ 0.661607] PM: Adding info for scsi:host2 [ 0.661671] PM: Adding info for No Bus:host2 [ 0.661728] scsi3 : ahci [ 0.661831] PM: Adding info for scsi:host3 [ 0.661886] PM: Adding info for No Bus:host3 [ 0.661941] scsi4 : ahci [ 0.662046] PM: Adding info for scsi:host4 [ 0.662104] PM: Adding info for No Bus:host4 [ 0.662159] scsi5 : ahci [ 0.662262] PM: Adding info for scsi:host5 [ 0.662316] PM: Adding info for No Bus:host5 [ 0.662674] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c0810= 0 irq 43 [ 0.662821] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c0818= 0 irq 43 [ 0.662966] ata3: DUMMY [ 0.663056] ata4: DUMMY [ 0.663148] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c0830= 0 irq 43 [ 0.663294] ata6: DUMMY [ 0.663400] scsi host0: rpm_resume flags 0x4 [ 0.663401] scsi host0: rpm_resume returns 1 [ 0.663564] usbmon: debugfs is not available [ 0.663670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.663767] ohci_hcd: block sizes: ed 80 td 96 [ 0.663858] usbcore: registered new interface driver libusual [ 0.664051] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0= x60,0x64 irq 1,12 [ 0.664222] PM: Adding info for platform:i8042 [ 0.668820] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.668918] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.669033] PM: Adding info for serio:serio0 [ 0.669097] PM: Adding info for serio:serio1 [ 0.669160] PM: Adding info for No Bus:mice [ 0.669209] mousedev: PS/2 mouse device common for all mice [ 0.669363] rtc_cmos 00:05: RTC can wake from S4 [ 0.672764] PM: Adding info for No Bus:rtc0 [ 0.672806] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.672928] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.673785] cpuidle: using governor ladder [ 0.675414] cpuidle: using governor menu [ 0.675659] PM: Adding info for No Bus:input0 [ 0.675715] input: AT Translated Set 2 keyboard as /devices/platform/i80= 42/serio0/input/input0 [ 0.676363] usbcore: registered new interface driver usbhid [ 0.676459] usbhid: USB HID core driver [ 0.676650] Netfilter messages via NETLINK v0.30. [ 0.676757] nf_conntrack version 0.5.0 (2675 buckets, 10700 max) [ 0.677022] ctnetlink v0.93: registering with nfnetlink. [ 0.677336] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.677478] TCP cubic registered [ 0.677571] Initializing XFRM netlink socket [ 0.678129] NET: Registered protocol family 10 [ 0.678912] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.679055] IPv6 over IPv4 tunneling driver [ 0.679217] PM: Adding info for No Bus:sit0 [ 0.679606] NET: Registered protocol family 17 [ 0.679720] Registering the dns_resolver key type [ 0.679848] PM: Adding info for No Bus:cpu_dma_latency [ 0.679955] PM: Adding info for No Bus:network_latency [ 0.680007] PM: Adding info for No Bus:network_throughput [ 0.680046] PM: Hibernation image not present or could not be loaded. [ 0.680052] registered taskstats version 1 [ 0.680497] Magic number: 11:767:89 [ 0.967169] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.969466] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succee= ded [ 0.971395] ata1.00: ATA-8: ST9500420AS, D005SDM1, max UDMA/133 [ 0.971525] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.974466] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succee= ded [ 0.984530] ata1.00: configured for UDMA/133 [ 0.984662] scsi host0: rpm_suspend flags 0x0 [ 0.984665] scsi host0: rpm_suspend returns 0 [ 0.984677] scsi target0:0:0: rpm_resume flags 0x4 [ 0.984679] scsi target0:0:0: rpm_resume returns -11 [ 0.984681] scsi host0: rpm_resume flags 0x4 [ 0.984683] ahci 0000:00:1f.2: rpm_resume flags 0x0 [ 0.984684] ahci 0000:00:1f.2: rpm_resume returns 1 [ 0.984686] scsi host0: rpm_resume returns 0 [ 0.984807] scsi 0:0:0:0: Direct-Access ATA ST9500420AS D0= 05 PQ: 0 ANSI: 5 [ 0.984977] PM: Adding info for scsi:target0:0:0 [ 0.985099] scsi target0:0:0: rpm_resume flags 0x4 [ 0.985101] scsi target0:0:0: rpm_resume returns 1 [ 0.985102] scsi 0:0:0:0: rpm_resume flags 0x0 [ 0.985104] scsi 0:0:0:0: rpm_resume returns -11 [ 0.985105] scsi 0:0:0:0: rpm_resume flags 0x4 [ 0.985106] scsi 0:0:0:0: rpm_resume returns 1 [ 0.985132] PM: Adding info for scsi:0:0:0:0 [ 0.985219] PM: Adding info for No Bus:0:0:0:0 [ 0.985279] PM: Adding info for No Bus:0:0:0:0 [ 0.985363] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB= /465 GiB) [ 0.985392] PM: Adding info for No Bus:0:0:0:0 [ 0.985468] scsi host1: rpm_resume flags 0x4 [ 0.985470] scsi host1: rpm_resume returns 1 [ 0.985668] sd 0:0:0:0: [sda] Write Protect is off [ 0.985765] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.985812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,= doesn't support DPO or FUA [ 0.985998] PM: Adding info for No Bus:8:0 [ 0.986091] PM: Adding info for No Bus:sda [ 0.986110] sd 0:0:0:0: rpm_resume flags 0x4 [ 0.986111] sd 0:0:0:0: rpm_resume returns 1 [ 1.031786] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.031932] PM: Adding info for No Bus:sda1 [ 1.031964] PM: Adding info for No Bus:sda2 [ 1.031989] PM: Adding info for No Bus:sda3 [ 1.032014] PM: Adding info for No Bus:sda4 [ 1.032038] PM: Adding info for No Bus:sda5 [ 1.032060] PM: Adding info for No Bus:sda6 [ 1.032686] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.289567] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.291565] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7717H, 102A, max UDMA/100 [ 1.293908] ata2.00: configured for UDMA/100 [ 1.294599] scsi host1: rpm_suspend flags 0x0 [ 1.294608] scsi host1: rpm_suspend returns 0 [ 1.294690] scsi target1:0:0: rpm_resume flags 0x4 [ 1.294692] scsi target1:0:0: rpm_resume returns -11 [ 1.294694] scsi host1: rpm_resume flags 0x4 [ 1.294696] ahci 0000:00:1f.2: rpm_resume flags 0x0 [ 1.294698] ahci 0000:00:1f.2: rpm_resume returns 1 [ 1.294699] scsi host1: rpm_resume returns 0 [ 1.296358] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7717H 10= 2A PQ: 0 ANSI: 5 [ 1.296566] PM: Adding info for scsi:target1:0:0 [ 1.296674] scsi target1:0:0: rpm_resume flags 0x4 [ 1.296676] scsi target1:0:0: rpm_resume returns 1 [ 1.296678] scsi 1:0:0:0: rpm_resume flags 0x0 [ 1.296679] scsi 1:0:0:0: rpm_resume returns -11 [ 1.296681] scsi 1:0:0:0: rpm_resume flags 0x4 [ 1.296682] scsi 1:0:0:0: rpm_resume returns 1 [ 1.296704] PM: Adding info for scsi:1:0:0:0 [ 1.296805] PM: Adding info for No Bus:1:0:0:0 [ 1.296917] PM: Adding info for No Bus:1:0:0:0 [ 1.297036] scsi host2: rpm_resume flags 0x4 [ 1.297052] scsi host2: rpm_resume returns 1 [ 1.297059] scsi host2: rpm_suspend flags 0x0 [ 1.297061] scsi host2: rpm_suspend returns 0 [ 1.297094] scsi host3: rpm_resume flags 0x4 [ 1.297095] scsi host3: rpm_resume returns 1 [ 1.297099] scsi host3: rpm_suspend flags 0x0 [ 1.297100] scsi host3: rpm_suspend returns 0 [ 1.297112] scsi host4: rpm_resume flags 0x4 [ 1.297114] scsi host4: rpm_resume returns 1 [ 1.600974] ata5: SATA link down (SStatus 0 SControl 300) [ 1.601109] scsi host4: rpm_suspend flags 0x0 [ 1.601112] scsi host4: rpm_suspend returns 0 [ 1.601186] scsi host5: rpm_resume flags 0x4 [ 1.601188] scsi host5: rpm_resume returns 1 [ 1.601194] scsi host5: rpm_suspend flags 0x0 [ 1.601196] scsi host5: rpm_suspend returns 0 [ 1.601265] sd 0:0:0:0: rpm_resume flags 0x4 [ 1.601268] sd 0:0:0:0: rpm_resume returns 1 [ 1.613884] Refined TSC clocksource calibration: 2594.106 MHz. [ 1.614021] Switching to clocksource tsc [ 1.623863] XFS mounting filesystem sda6 [ 1.901114] Ending clean XFS mount for filesystem: sda6 [ 1.901224] VFS: Mounted root (xfs filesystem) readonly on device 8:6. [ 1.902191] Freeing unused kernel memory: 428k freed [ 1.902355] Write protecting the kernel read-only data: 6144k [ 1.904230] Freeing unused kernel memory: 580k freed [ 1.906912] Freeing unused kernel memory: 864k freed [ 4.214761] <30>udevd[4003]: starting version 168 [ 4.609381] ACPI: Deprecated procfs I/F for AC is loaded, please retry w= ith CONFIG_ACPI_PROCFS_POWER cleared [ 4.609417] PM: Adding info for No Bus:ADP0 [ 4.690382] ACPI: acpi_idle yielding to intel_idle [ 4.690584] PM: Adding info for No Bus:cooling_device0 [ 4.693119] PM: Adding info for No Bus:cooling_device1 [ 4.693242] PM: Adding info for No Bus:cooling_device2 [ 4.694699] PM: Adding info for No Bus:cooling_device3 [ 4.709211] ACPI: AC Adapter [ADP0] (on-line) [ 4.718708] PM: Adding info for No Bus:BAT0 [ 4.725733] ACPI: Deprecated procfs I/F for battery is loaded, please re= try with CONFIG_ACPI_PROCFS_POWER cleared [ 4.725745] ACPI: Battery Slot [BAT0] (battery present) [ 4.725797] PM: Adding info for No Bus:input1 [ 4.725818] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0= C:00/input/input1 [ 4.725824] ACPI: Power Button [PWRB] [ 4.725882] PM: Adding info for No Bus:input2 [ 4.725907] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0= E:00/input/input2 [ 4.725911] ACPI: Sleep Button [SLPB] [ 4.725970] PM: Adding info for No Bus:input3 [ 4.725996] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:= 00/input/input3 [ 4.736035] ACPI: Lid Switch [LID0] [ 4.736146] PM: Adding info for No Bus:input4 [ 4.736169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/inpu= t/input4 [ 4.736174] ACPI: Power Button [PWRF] [ 4.764668] PM: Adding info for No Bus:event0 [ 4.764701] PM: Adding info for No Bus:event1 [ 4.764728] PM: Adding info for No Bus:event2 [ 4.764756] PM: Adding info for No Bus:event3 [ 4.764781] PM: Adding info for No Bus:event4 [ 4.796896] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) ->= IRQ 18 [ 4.796901] ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts wi= th ACPI region SMBI [io 0xefa0-0xefaf] [ 4.796903] ACPI: If an ACPI driver is available for this device, you sh= ould use it instead of the native driver [ 4.900781] PM: Adding info for No Bus:8D9DDCBC-A997-11DA-B012-B622A1EF5= 492 [ 4.900823] PM: Adding info for No Bus:A80593CE-A997-11DA-B012-B622A1EF5= 492 [ 4.900859] PM: Adding info for No Bus:DD8C7670-1CB5-11DB-A98B-669A0C200= 008 [ 4.900897] PM: Adding info for No Bus:9DBB5994-A997-11DA-B012-B622A1EF5= 492 [ 4.900933] PM: Adding info for No Bus:A3776CE0-1E88-11DB-A98B-0800200C9= A66 [ 4.900971] PM: Adding info for No Bus:05901221-D566-11D1-B2F0-00A0C9062= 910 [ 4.901019] wmi: Mapper loaded [ 5.060060] PM: Adding info for No Bus:thermal_zone0 [ 5.060204] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.060205] ACPI: Thermal Zone [TZ00] (54 C) [ 5.060622] PM: Adding info for No Bus:thermal_zone1 [ 5.060785] thermal LNXTHERM:01: registered as thermal_zone1 [ 5.060786] ACPI: Thermal Zone [TZ01] (54 C) [ 5.108195] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> I= RQ 19 [ 5.108216] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 5.108221] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 5.108242] drivers/usb/core/inode.c: creating file 'devices' [ 5.108246] drivers/usb/core/inode.c: creating file '001' [ 5.108248] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus = number 1 [ 5.115492] xhci_hcd 0000:04:00.0: supports USB remote wakeup [ 5.115510] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000 [ 5.115579] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 5.115585] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 5.115591] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 5.115596] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 5.115602] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 5.118867] usb usb1: No SuperSpeed endpoint companion for config 1 int= erface 0 altsetting 0 ep 129: using minimum values [ 5.118875] usb usb1: default language 0x0409 [ 5.118889] usb usb1: udev 1, busnum 1, minor =3D 0 [ 5.118896] usb usb1: New USB device found, idVendor=3D1d6b, idProduct= =3D0003 [ 5.118898] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 5.118900] usb usb1: Product: xHCI Host Controller [ 5.118901] usb usb1: Manufacturer: Linux 2.6.38.6-dbg xhci_hcd [ 5.118903] usb usb1: SerialNumber: 0000:04:00.0 [ 5.118946] PM: Adding info for usb:usb1 [ 5.118967] usb usb1: usb_probe_device [ 5.118969] usb usb1: configuration #1 chosen from 1 choice [ 5.118972] xHCI xhci_add_endpoint called for root hub [ 5.118973] xHCI xhci_check_bandwidth called for root hub [ 5.118980] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 5.119027] PM: Adding info for usb:1-0:1.0 [ 5.119048] hub 1-0:1.0: usb_probe_interface [ 5.119050] hub 1-0:1.0: usb_probe_interface - got id [ 5.119052] hub 1-0:1.0: USB hub found [ 5.119057] hub 1-0:1.0: 4 ports detected [ 5.119059] hub 1-0:1.0: standalone hub [ 5.119060] hub 1-0:1.0: individual port power switching [ 5.119061] hub 1-0:1.0: individual port over-current protection [ 5.119063] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 5.119064] hub 1-0:1.0: power on to power good time: 20ms [ 5.119070] hub 1-0:1.0: local power source is good [ 5.119072] hub 1-0:1.0: enabling power on all ports [ 5.119107] hub 1-0:1.0: rpm_suspend flags 0x4 [ 5.119108] hub 1-0:1.0: rpm_suspend returns 0 [ 5.119125] PM: Adding info for No Bus:ep_81 [ 5.119128] drivers/usb/core/inode.c: creating file '001' [ 5.119155] PM: Adding info for No Bus:ep_00 [ 5.119157] usb usb1: rpm_suspend flags 0xc [ 5.119159] usb usb1: rpm_suspend returns -38 [ 5.132327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.132354] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ = 17 [ 5.132400] r8169 0000:06:00.0: setting latency timer to 64 [ 5.132407] r8169 0000:06:00.0: (unregistered net_device): unknown MAC, = using family default [ 5.132480] r8169 0000:06:00.0: irq 49 for MSI/MSI-X [ 5.132551] PM: Adding info for No Bus:eth0 [ 5.132902] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xffffc9000003c0= 00, 14:fe:b5:ac:11:58, XID 0c200000 IRQ 49 [ 5.153637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.153640] Warning! ehci_hcd should always be loaded before uhci_hcd an= d ohci_hcd, not after [ 5.153643] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 5.153671] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> I= RQ 16 [ 5.153695] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.153700] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 5.153707] drivers/usb/core/inode.c: creating file '002' [ 5.153713] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus = number 2 [ 5.163208] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=3D2 cc= =3D0 pcc=3D0 ordered !ppc ports=3D2 [ 5.163218] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame = 1024 64 bit addr [ 5.163321] ehci_hcd 0000:00:1a.0: support lpm [ 5.163331] ehci_hcd 0000:00:1a.0: debug port 2 [ 5.163336] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=3D0 ithr= esh=3D8 period=3D1024 Reset HALT [ 5.167204] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 5.167207] ehci_hcd 0000:00:1a.0: supports USB remote wakeup [ 5.167238] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000 [ 5.167244] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=3D0 ithr= esh=3D8 period=3D1024 Reset HALT [ 5.171129] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=3D0 ithre= sh=3D1 period=3D1024 RUN [ 5.176164] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.176202] usb usb2: default language 0x0409 [ 5.176225] usb usb2: udev 1, busnum 2, minor =3D 128 [ 5.176227] usb usb2: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 [ 5.176229] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 5.176230] usb usb2: Product: EHCI Host Controller [ 5.176232] usb usb2: Manufacturer: Linux 2.6.38.6-dbg ehci_hcd [ 5.176233] usb usb2: SerialNumber: 0000:00:1a.0 [ 5.176279] PM: Adding info for usb:usb2 [ 5.176305] usb usb2: usb_probe_device [ 5.176307] usb usb2: configuration #1 chosen from 1 choice [ 5.176319] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 5.176333] PM: Adding info for usb:2-0:1.0 [ 5.176347] hub 2-0:1.0: usb_probe_interface [ 5.176349] hub 2-0:1.0: usb_probe_interface - got id [ 5.176350] hub 2-0:1.0: USB hub found [ 5.176357] hub 2-0:1.0: 2 ports detected [ 5.176359] hub 2-0:1.0: standalone hub [ 5.176360] hub 2-0:1.0: no power switching (usb 1.0) [ 5.176361] hub 2-0:1.0: individual port over-current protection [ 5.176363] hub 2-0:1.0: power on to power good time: 20ms [ 5.176375] hub 2-0:1.0: local power source is good [ 5.176377] hub 2-0:1.0: trying to enable port power on non-switchable h= ub [ 5.176393] hub 2-0:1.0: rpm_suspend flags 0x4 [ 5.176395] hub 2-0:1.0: rpm_suspend returns 0 [ 5.176415] PM: Adding info for No Bus:ep_81 [ 5.176417] drivers/usb/core/inode.c: creating file '001' [ 5.176436] PM: Adding info for No Bus:ep_00 [ 5.176437] usb usb2: rpm_suspend flags 0xc [ 5.176439] usb usb2: rpm_suspend returns -38 [ 5.176514] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> I= RQ 23 [ 5.176532] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.176535] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 5.176540] drivers/usb/core/inode.c: creating file '003' [ 5.176543] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus = number 3 [ 5.182171] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=3D2 cc= =3D0 pcc=3D0 ordered !ppc ports=3D2 [ 5.182180] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame = 1024 64 bit addr [ 5.182287] ehci_hcd 0000:00:1d.0: support lpm [ 5.182297] ehci_hcd 0000:00:1d.0: debug port 2 [ 5.182302] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=3D0 ithr= esh=3D8 period=3D1024 Reset HALT [ 5.185333] PM: Adding info for No Bus:input5 [ 5.185358] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 5.185399] PM: Adding info for No Bus:event5 [ 5.186182] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 5.186184] ehci_hcd 0000:00:1d.0: supports USB remote wakeup [ 5.186206] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000 [ 5.186210] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=3D0 ithr= esh=3D8 period=3D1024 Reset HALT [ 5.190075] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=3D0 ithre= sh=3D1 period=3D1024 RUN [ 5.195144] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.195241] usb usb3: default language 0x0409 [ 5.195276] usb usb3: udev 1, busnum 3, minor =3D 256 [ 5.195278] usb usb3: New USB device found, idVendor=3D1d6b, idProduct= =3D0002 [ 5.195280] usb usb3: New USB device strings: Mfr=3D3, Product=3D2, Seri= alNumber=3D1 [ 5.195281] usb usb3: Product: EHCI Host Controller [ 5.195283] usb usb3: Manufacturer: Linux 2.6.38.6-dbg ehci_hcd [ 5.195284] usb usb3: SerialNumber: 0000:00:1d.0 [ 5.195329] PM: Adding info for usb:usb3 [ 5.195353] usb usb3: usb_probe_device [ 5.195356] usb usb3: configuration #1 chosen from 1 choice [ 5.195366] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 5.195380] PM: Adding info for usb:3-0:1.0 [ 5.195395] hub 3-0:1.0: usb_probe_interface [ 5.195396] hub 3-0:1.0: usb_probe_interface - got id [ 5.195398] hub 3-0:1.0: USB hub found [ 5.195404] hub 3-0:1.0: 2 ports detected [ 5.195406] hub 3-0:1.0: standalone hub [ 5.195407] hub 3-0:1.0: no power switching (usb 1.0) [ 5.195408] hub 3-0:1.0: individual port over-current protection [ 5.195410] hub 3-0:1.0: power on to power good time: 20ms [ 5.195420] hub 3-0:1.0: local power source is good [ 5.195422] hub 3-0:1.0: trying to enable port power on non-switchable h= ub [ 5.195436] hub 3-0:1.0: rpm_suspend flags 0x4 [ 5.195438] hub 3-0:1.0: rpm_suspend returns 0 [ 5.195457] PM: Adding info for No Bus:ep_81 [ 5.195459] drivers/usb/core/inode.c: creating file '001' [ 5.195478] PM: Adding info for No Bus:ep_00 [ 5.195480] usb usb3: rpm_suspend flags 0xc [ 5.195481] usb usb3: rpm_suspend returns -38 [ 5.218168] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 5.243106] PM: Adding info for No Bus:sg0 [ 5.243127] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.243172] PM: Adding info for No Bus:sg1 [ 5.243188] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.275996] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK= POWER sig=3Dj CSC CONNECT [ 5.276004] hub 2-0:1.0: port 1: status 0501 change 0001 [ 5.295004] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK= POWER sig=3Dj CSC CONNECT [ 5.295026] hub 3-0:1.0: port 1: status 0501 change 0001 [ 5.363633] sd 0:0:0:0: rpm_resume flags 0x4 [ 5.363635] sd 0:0:0:0: rpm_resume returns 1 [ 5.375839] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 5.375886] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 5.426924] ehci_hcd 0000:00:1a.0: port 1 high speed [ 5.426931] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK= POWER sig=3Dse0 PE CONNECT [ 5.435133] sd 0:0:0:0: rpm_resume flags 0x4 [ 5.435136] sd 0:0:0:0: rpm_resume returns 1 [ 5.435214] sd 0:0:0:0: rpm_resume flags 0x4 [ 5.435216] sd 0:0:0:0: rpm_resume returns 1 [ 5.436900] sd 0:0:0:0: rpm_resume flags 0x4 [ 5.436902] sd 0:0:0:0: rpm_resume returns 1 [ 5.477619] usb 2-1: new high speed USB device using ehci_hcd and addres= s 2 [ 5.528733] ehci_hcd 0000:00:1a.0: port 1 high speed [ 5.528740] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK= POWER sig=3Dse0 PE CONNECT [ 5.530762] scsi host1: rpm_resume flags 0x4 [ 5.530765] scsi host1: rpm_resume returns 1 [ 5.532749] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 = cdda tray [ 5.532759] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.532829] PM: Adding info for No Bus:11:0 [ 5.532880] PM: Adding info for No Bus:sr0 [ 5.532927] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.550147] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0x= d04773/0xa40000/0x8a0400 [ 5.591577] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 [ 5.591582] ehci_hcd 0000:00:1a.0: LPM: no device attached [ 5.591894] usb 2-1: udev 2, busnum 2, minor =3D 129 [ 5.591901] usb 2-1: New USB device found, idVendor=3D8087, idProduct=3D= 0024 [ 5.591907] usb 2-1: New USB device strings: Mfr=3D0, Product=3D0, Seria= lNumber=3D0 [ 5.592015] PM: Adding info for usb:2-1 [ 5.592042] usb 2-1: usb_probe_device [ 5.592046] usb 2-1: configuration #1 chosen from 1 choice [ 5.592157] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 5.592172] PM: Adding info for usb:2-1:1.0 [ 5.592190] hub 2-1:1.0: usb_probe_interface [ 5.592192] hub 2-1:1.0: usb_probe_interface - got id [ 5.592195] hub 2-1:1.0: USB hub found [ 5.592270] hub 2-1:1.0: 6 ports detected [ 5.592281] hub 2-1:1.0: standalone hub [ 5.592283] hub 2-1:1.0: individual port power switching [ 5.592284] hub 2-1:1.0: individual port over-current protection [ 5.592285] hub 2-1:1.0: Single TT [ 5.592287] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 5.592288] hub 2-1:1.0: power on to power good time: 100ms [ 5.592514] hub 2-1:1.0: local power source is good [ 5.592520] hub 2-1:1.0: enabling power on all ports [ 5.593265] hub 2-1:1.0: rpm_suspend flags 0x4 [ 5.593270] hub 2-1:1.0: rpm_suspend returns 0 [ 5.593334] PM: Adding info for No Bus:ep_81 [ 5.593341] drivers/usb/core/inode.c: creating file '002' [ 5.593384] PM: Adding info for No Bus:ep_00 [ 5.593386] usb 2-1: rpm_suspend flags 0xc [ 5.593387] usb 2-1: rpm_suspend returns -38 [ 5.593391] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 5.593403] hub 3-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 5.595421] PM: Adding info for No Bus:input6 [ 5.595449] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042= /serio1/input/input6 [ 5.595490] PM: Adding info for No Bus:mouse0 [ 5.595531] PM: Adding info for No Bus:event6 [ 5.644514] ehci_hcd 0000:00:1d.0: port 1 high speed [ 5.644519] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK= POWER sig=3Dse0 PE CONNECT [ 5.692698] hub 2-1:1.0: port 4: status 0101 change 0001 [ 5.695212] usb 3-1: new high speed USB device using ehci_hcd and addres= s 2 [ 5.716170] scsi host1: rpm_resume flags 0x4 [ 5.716176] scsi host1: rpm_resume returns 1 [ 5.717715] scsi host1: rpm_resume flags 0x4 [ 5.717720] scsi host1: rpm_resume returns 1 [ 5.719269] scsi host1: rpm_resume flags 0x4 [ 5.719274] scsi host1: rpm_resume returns 1 [ 5.732300] scsi host1: rpm_resume flags 0x4 [ 5.732307] scsi host1: rpm_resume returns 1 [ 5.746320] ehci_hcd 0000:00:1d.0: port 1 high speed [ 5.746325] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK= POWER sig=3Dse0 PE CONNECT [ 5.792046] usb 2-1: link qh256-0001/ffff880013734e10 start 1 [1/0 us] [ 5.809094] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 [ 5.809100] ehci_hcd 0000:00:1d.0: LPM: no device attached [ 5.809341] usb 3-1: udev 2, busnum 3, minor =3D 257 [ 5.809344] usb 3-1: New USB device found, idVendor=3D8087, idProduct=3D= 0024 [ 5.809346] usb 3-1: New USB device strings: Mfr=3D0, Product=3D0, Seria= lNumber=3D0 [ 5.809413] PM: Adding info for usb:3-1 [ 5.809447] usb 3-1: usb_probe_device [ 5.809450] usb 3-1: configuration #1 chosen from 1 choice [ 5.809589] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 5.809618] PM: Adding info for usb:3-1:1.0 [ 5.809641] hub 3-1:1.0: usb_probe_interface [ 5.809643] hub 3-1:1.0: usb_probe_interface - got id [ 5.809646] hub 3-1:1.0: USB hub found [ 5.809709] hub 3-1:1.0: 8 ports detected [ 5.809712] hub 3-1:1.0: standalone hub [ 5.809714] hub 3-1:1.0: individual port power switching [ 5.809716] hub 3-1:1.0: individual port over-current protection [ 5.809718] hub 3-1:1.0: Single TT [ 5.809720] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 5.809722] hub 3-1:1.0: power on to power good time: 100ms [ 5.809958] hub 3-1:1.0: local power source is good [ 5.809961] hub 3-1:1.0: enabling power on all ports [ 5.810957] hub 3-1:1.0: rpm_suspend flags 0x4 [ 5.810960] hub 3-1:1.0: rpm_suspend returns 0 [ 5.810991] PM: Adding info for No Bus:ep_81 [ 5.810995] drivers/usb/core/inode.c: creating file '002' [ 5.811027] PM: Adding info for No Bus:ep_00 [ 5.811029] usb 3-1: rpm_suspend flags 0xc [ 5.811032] usb 3-1: rpm_suspend returns -38 [ 5.811036] hub 2-1:1.0: state 7 ports 6 chg 0010 evt 0000 [ 5.811081] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 5.821048] PM: Adding info for No Bus:timer [ 5.822091] hub 2-1:1.0: port 4 not reset yet, waiting 10ms [ 5.883983] usb 2-1.4: new high speed USB device using ehci_hcd and addr= ess 3 [ 5.894947] hub 2-1:1.0: port 4 not reset yet, waiting 10ms [ 5.910533] hub 3-1:1.0: port 6: status 0101 change 0001 [ 5.917952] scsi host1: rpm_resume flags 0x4 [ 5.917959] scsi host1: rpm_resume returns 1 [ 5.919498] scsi host1: rpm_resume flags 0x4 [ 5.919503] scsi host1: rpm_resume returns 1 [ 5.932497] scsi host1: rpm_resume flags 0x4 [ 5.932505] scsi host1: rpm_resume returns 1 [ 5.969787] usb 2-1.4: skipped 2 descriptors after configuration [ 5.969791] usb 2-1.4: skipped 7 descriptors after interface [ 5.969795] usb 2-1.4: skipped 1 descriptor after endpoint [ 5.969798] usb 2-1.4: skipped 28 descriptors after interface [ 5.969803] usb 2-1.4: skipped 2 descriptors after interface [ 5.970030] usb 2-1.4: default language 0x0409 [ 5.970281] usb 2-1.4: udev 3, busnum 2, minor =3D 130 [ 5.970284] usb 2-1.4: New USB device found, idVendor=3D0408, idProduct= =3D2fb1 [ 5.970287] usb 2-1.4: New USB device strings: Mfr=3D3, Product=3D2, Ser= ialNumber=3D0 [ 5.970290] usb 2-1.4: Product: Laptop_Integrated_Webcam_2HDM [ 5.970292] usb 2-1.4: Manufacturer: CN07CN2C7866414I0D37A00 [ 5.970362] PM: Adding info for usb:2-1.4 [ 5.970403] usb 2-1.4: usb_probe_device [ 5.970406] usb 2-1.4: configuration #1 chosen from 1 choice [ 5.970656] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0) [ 5.970693] PM: Adding info for usb:2-1.4:1.0 [ 5.970954] PM: Adding info for No Bus:ep_81 [ 5.970958] usb 2-1.4: adding 2-1.4:1.1 (config #1, interface 1) [ 5.970987] PM: Adding info for usb:2-1.4:1.1 [ 5.971010] usb 2-1.4: adding 2-1.4:1.2 (config #1, interface 2) [ 5.971046] PM: Adding info for usb:2-1.4:1.2 [ 5.971069] drivers/usb/core/inode.c: creating file '003' [ 5.971102] PM: Adding info for No Bus:ep_00 [ 5.971105] usb 2-1.4: rpm_suspend flags 0xc [ 5.971108] usb 2-1.4: rpm_suspend returns -38 [ 5.971112] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 5.972674] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in= =2Dtree: [ 5.972677] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 5.972774] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [ 5.972815] iwlagn 0000:03:00.0: setting latency timer to 64 [ 5.972892] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-= N 1030 BGN, REV=3D0xB0 [ 5.989716] iwlagn 0000:03:00.0: device EEPROM VER=3D0x716, CALIB=3D0x6 [ 5.989719] iwlagn 0000:03:00.0: Device SKU: 0X9 [ 5.989721] iwlagn 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 5.990144] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11= a channels [ 5.990397] iwlagn 0000:03:00.0: irq 50 for MSI/MSI-X [ 5.990969] PM: Adding info for No Bus:0000:03:00.0 [ 6.010610] usb 3-1: link qh256-0001/ffff8800134b3cf0 start 1 [1/0 us] [ 6.010623] hub 3-1:1.0: state 7 ports 8 chg 0040 evt 0000 [ 6.010713] hub 3-1:1.0: port 6, status 0101, change 0000, 12 Mb/s [ 6.021740] hub 3-1:1.0: port 6 not reset yet, waiting 10ms [ 6.046738] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> = IRQ 22 [ 6.046788] HDA Intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 6.046813] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.064540] sd 0:0:0:0: rpm_resume flags 0x4 [ 6.064544] sd 0:0:0:0: rpm_resume returns 1 [ 6.083602] usb 3-1.6: new high speed USB device using ehci_hcd and addr= ess 3 [ 6.093968] PM: Removing info for No Bus:0000:03:00.0 [ 6.094028] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.2 buil= d 35905 [ 6.094614] PM: Adding info for No Bus:phy0 [ 6.094652] PM: Adding info for No Bus:rfkill0 [ 6.095550] hub 3-1:1.0: port 6 not reset yet, waiting 10ms [ 6.096132] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 6.096204] PM: Adding info for No Bus:wlan0 [ 6.134526] sd 0:0:0:0: rpm_resume flags 0x4 [ 6.134529] sd 0:0:0:0: rpm_resume returns 1 [ 6.139650] sd 0:0:0:0: rpm_resume flags 0x4 [ 6.139653] sd 0:0:0:0: rpm_resume returns 1 [ 6.139774] sd 0:0:0:0: rpm_resume flags 0x4 [ 6.139777] sd 0:0:0:0: rpm_resume returns 1 [ 6.139994] sd 0:0:0:0: rpm_resume flags 0x4 [ 6.139997] sd 0:0:0:0: rpm_resume returns 1 [ 6.140114] sd 0:0:0:0: rpm_resume flags 0x4 [ 6.140117] sd 0:0:0:0: rpm_resume returns 1 [ 6.140416] sd 0:0:0:0: rpm_resume flags 0x4 [ 6.140418] sd 0:0:0:0: rpm_resume returns 1 [ 6.170683] usb 3-1.6: skipped 3 descriptors after interface [ 6.170691] usb 3-1.6: skipped 4 descriptors after interface [ 6.170699] usb 3-1.6: skipped 4 descriptors after interface [ 6.170707] usb 3-1.6: skipped 2 descriptors after interface [ 6.170713] usb 3-1.6: skipped 5 descriptors after interface [ 6.170723] usb 3-1.6: skipped 2 descriptors after interface [ 6.170729] usb 3-1.6: skipped 4 descriptors after interface [ 6.171676] usb 3-1.6: skipped 3 descriptors after interface [ 6.171681] usb 3-1.6: skipped 4 descriptors after interface [ 6.171689] usb 3-1.6: skipped 4 descriptors after interface [ 6.171697] usb 3-1.6: skipped 2 descriptors after interface [ 6.171703] usb 3-1.6: skipped 5 descriptors after interface [ 6.171717] usb 3-1.6: skipped 2 descriptors after interface [ 6.171940] usb 3-1.6: default language 0x0409 [ 6.172668] usb 3-1.6: udev 3, busnum 3, minor =3D 258 [ 6.172674] usb 3-1.6: New USB device found, idVendor=3D413c, idProduct= =3D8184 [ 6.172680] usb 3-1.6: New USB device strings: Mfr=3D1, Product=3D2, Ser= ialNumber=3D3 [ 6.172686] usb 3-1.6: Product: Dell Wireless 5540 [ 6.172690] usb 3-1.6: Manufacturer: [] ? slab_err+0x8a/0x98 [ 33.029877] [] ? on_freelist+0x169/0x19d [ 33.029886] [] ? free_iova_mem+0x13/0x15 [ 33.029894] [] ? free_debug_processing+0x5c/0x1a3 [ 33.029909] [] ? __slab_free+0xe4/0xf9 [ 33.029911] [] ? free_iova_mem+0x13/0x15 [ 33.029914] [] ? kmem_cache_free+0x5a/0x66 [ 33.029916] [] ? free_iova_mem+0x13/0x15 [ 33.029918] [] ? __free_iova+0x5a/0x62 [ 33.029920] [] ? flush_unmaps+0xee/0x12f [ 33.029924] [] ? sched_clock_cpu+0x46/0xd1 [ 33.029926] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.029928] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.029932] [] ? run_timer_softirq+0x18f/0x21f [ 33.029935] [] ? lapic_next_event+0x18/0x1c [ 33.029938] [] ? __do_softirq+0x83/0x12a [ 33.029940] [] ? tick_program_event+0x1a/0x1c [ 33.029943] [] ? call_softirq+0x1c/0x28 [ 33.029946] [] ? do_softirq+0x33/0x68 [ 33.029948] [] ? irq_exit+0x36/0x78 [ 33.029950] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.029953] [] ? apic_timer_interrupt+0x13/0x20 [ 33.029954] [] ? intel_idle+0xc3/0xe9 [ 33.029959] [] ? intel_idle+0xa6/0xe9 [ 33.029963] [] ? cpuidle_idle_call+0x94/0xcd [ 33.029965] [] ? cpu_idle+0x5a/0x91 [ 33.029968] [] ? rest_init+0x68/0x6a [ 33.029971] [] ? start_kernel+0x35e/0x369 [ 33.029974] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.029976] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.029978] FIX iommu_iova: Object count adjusted. [ 33.029979] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.029981] BUG iommu_iova: Redzone overwritten [ 33.029982] ------------------------------------------------------------= =2D---------------- [ 33.029983]=20 [ 33.029984] INFO: 0xffff8800141a00e8-0xffff8800141a00ef. First byte 0xbb= instead of 0xcc [ 33.029987] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D2 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.029989] INFO: Object 0xffff8800141a00c0 @offset=3D192 fp=3D0xffff880= 0141a0040 [ 33.029990]=20 [ 33.029991] Bytes b4 0xffff8800141a00b0: 01 00 00 00 00 00 00 00 00 00 = 00 00 00 00 00 00 ................ [ 33.029998] Object 0xffff8800141a00c0: 40 00 1a 14 00 88 ff ff c0 04 = 1a 14 00 88 ff ff @.....=FF=FF=C0.....=FF=FF [ 33.030004] Object 0xffff8800141a00d0: 00 00 00 00 00 00 00 00 bf ff = 0f 00 00 00 00 00 ........=BF=FF...... [ 33.030011] Object 0xffff8800141a00e0: 80 ff 0f 00 00 00 00 00 = .=FF...... =20 [ 33.030017] Redzone 0xffff8800141a00e8: bb bb bb bb bb bb bb bb = =BB=BB=BB=BB=BB=BB=BB=BB =20 [ 33.030023] Padding 0xffff8800141a00f0: ff ff ff ff ff ff ff ff ff fe = ff ff ff ff ff ff =FF=FF=FF=FF=FF=FF=FF=FF=FF=FE=FF=FF=FF=FF=FF=FF [ 33.030030] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030031] Call Trace: [ 33.030032] [] ? print_trailer+0x12e/0x137 [ 33.030036] [] ? check_bytes_and_report+0xb9/0xfd [ 33.030038] [] ? domain_get_iommu+0x18/0x46 [ 33.030041] [] ? check_object+0x49/0x194 [ 33.030043] [] ? free_iova_mem+0x13/0x15 [ 33.030045] [] ? free_debug_processing+0x7a/0x1a3 [ 33.030048] [] ? __slab_free+0xe4/0xf9 [ 33.030050] [] ? free_iova_mem+0x13/0x15 [ 33.030052] [] ? kmem_cache_free+0x5a/0x66 [ 33.030054] [] ? free_iova_mem+0x13/0x15 [ 33.030056] [] ? __free_iova+0x5a/0x62 [ 33.030058] [] ? flush_unmaps+0xee/0x12f [ 33.030061] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030063] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030065] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030068] [] ? run_timer_softirq+0x18f/0x21f [ 33.030070] [] ? lapic_next_event+0x18/0x1c [ 33.030073] [] ? __do_softirq+0x83/0x12a [ 33.030075] [] ? tick_program_event+0x1a/0x1c [ 33.030077] [] ? call_softirq+0x1c/0x28 [ 33.030079] [] ? do_softirq+0x33/0x68 [ 33.030081] [] ? irq_exit+0x36/0x78 [ 33.030084] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030086] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030087] [] ? intel_idle+0xc3/0xe9 [ 33.030092] [] ? intel_idle+0xa6/0xe9 [ 33.030094] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030096] [] ? cpu_idle+0x5a/0x91 [ 33.030098] [] ? rest_init+0x68/0x6a [ 33.030100] [] ? start_kernel+0x35e/0x369 [ 33.030102] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030104] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030106] FIX iommu_iova: Restoring 0xffff8800141a00e8-0xffff8800141a0= 0ef=3D0xcc [ 33.030107]=20 [ 33.030111] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030112] BUG iommu_iova: Wrong object count. Counter is 2 but counted= were 3 [ 33.030114] ------------------------------------------------------------= =2D---------------- [ 33.030114]=20 [ 33.030116] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D2 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030118] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030119] Call Trace: [ 33.030120] [] ? slab_err+0x8a/0x98 [ 33.030124] [] ? dump_stack+0x6a/0x71 [ 33.030127] [] ? on_freelist+0x169/0x19d [ 33.030129] [] ? free_iova_mem+0x13/0x15 [ 33.030131] [] ? free_debug_processing+0x5c/0x1a3 [ 33.030134] [] ? __slab_free+0xe4/0xf9 [ 33.030135] [] ? free_iova_mem+0x13/0x15 [ 33.030138] [] ? kmem_cache_free+0x5a/0x66 [ 33.030140] [] ? free_iova_mem+0x13/0x15 [ 33.030142] [] ? __free_iova+0x5a/0x62 [ 33.030144] [] ? flush_unmaps+0xee/0x12f [ 33.030147] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030149] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030151] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030154] [] ? run_timer_softirq+0x18f/0x21f [ 33.030156] [] ? lapic_next_event+0x18/0x1c [ 33.030158] [] ? __do_softirq+0x83/0x12a [ 33.030161] [] ? tick_program_event+0x1a/0x1c [ 33.030163] [] ? call_softirq+0x1c/0x28 [ 33.030165] [] ? do_softirq+0x33/0x68 [ 33.030167] [] ? irq_exit+0x36/0x78 [ 33.030169] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030171] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030172] [] ? intel_idle+0xc3/0xe9 [ 33.030177] [] ? intel_idle+0xa6/0xe9 [ 33.030179] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030181] [] ? cpu_idle+0x5a/0x91 [ 33.030183] [] ? rest_init+0x68/0x6a [ 33.030185] [] ? start_kernel+0x35e/0x369 [ 33.030187] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030190] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030191] FIX iommu_iova: Object count adjusted. [ 33.030192] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030194] BUG iommu_iova: Redzone overwritten [ 33.030195] ------------------------------------------------------------= =2D---------------- [ 33.030196]=20 [ 33.030197] INFO: 0xffff8800141a0068-0xffff8800141a006f. First byte 0xbb= instead of 0xcc [ 33.030199] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D3 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030201] INFO: Object 0xffff8800141a0040 @offset=3D64 fp=3D0xffff8800= 141a0000 [ 33.030202]=20 [ 33.030203] Bytes b4 0xffff8800141a0030: ff ff ff ff ff ff ff ff ff fe = ff ff ff ff ff ff =FF=FF=FF=FF=FF=FF=FF=FF=FF=FE=FF=FF=FF=FF=FF=FF [ 33.030209] Object 0xffff8800141a0040: 00 00 1a 14 00 88 ff ff c0 04 = 1a 14 00 88 ff ff ......=FF=FF=C0.....=FF=FF [ 33.030216] Object 0xffff8800141a0050: 00 00 00 00 00 00 00 00 7f ff = 0f 00 00 00 00 00 .........=FF...... [ 33.030222] Object 0xffff8800141a0060: 60 ff 0f 00 00 00 00 00 = `=FF...... =20 [ 33.030228] Redzone 0xffff8800141a0068: bb bb bb bb bb bb bb bb = =BB=BB=BB=BB=BB=BB=BB=BB =20 [ 33.030234] Padding 0xffff8800141a0070: e0 4f 61 81 ff ff ff ff 90 5d = b2 14 00 88 ff ff =E0Oa.=FF=FF=FF=FF.]=B2...=FF=FF [ 33.030241] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030242] Call Trace: [ 33.030242] [] ? print_trailer+0x12e/0x137 [ 33.030247] [] ? check_bytes_and_report+0xb9/0xfd [ 33.030249] [] ? domain_get_iommu+0x18/0x46 [ 33.030251] [] ? check_object+0x49/0x194 [ 33.030253] [] ? free_iova_mem+0x13/0x15 [ 33.030255] [] ? free_debug_processing+0x7a/0x1a3 [ 33.030258] [] ? __slab_free+0xe4/0xf9 [ 33.030260] [] ? free_iova_mem+0x13/0x15 [ 33.030262] [] ? kmem_cache_free+0x5a/0x66 [ 33.030264] [] ? free_iova_mem+0x13/0x15 [ 33.030266] [] ? __free_iova+0x5a/0x62 [ 33.030268] [] ? flush_unmaps+0xee/0x12f [ 33.030271] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030273] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030275] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030278] [] ? run_timer_softirq+0x18f/0x21f [ 33.030280] [] ? lapic_next_event+0x18/0x1c [ 33.030282] [] ? __do_softirq+0x83/0x12a [ 33.030285] [] ? tick_program_event+0x1a/0x1c [ 33.030287] [] ? call_softirq+0x1c/0x28 [ 33.030289] [] ? do_softirq+0x33/0x68 [ 33.030291] [] ? irq_exit+0x36/0x78 [ 33.030293] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030296] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030297] [] ? intel_idle+0xc3/0xe9 [ 33.030301] [] ? intel_idle+0xa6/0xe9 [ 33.030303] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030305] [] ? cpu_idle+0x5a/0x91 [ 33.030307] [] ? rest_init+0x68/0x6a [ 33.030309] [] ? start_kernel+0x35e/0x369 [ 33.030312] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030314] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030316] FIX iommu_iova: Restoring 0xffff8800141a0068-0xffff8800141a0= 06f=3D0xcc [ 33.030316]=20 [ 33.030320] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030321] BUG iommu_iova: Wrong object count. Counter is 3 but counted= were 4 [ 33.030322] ------------------------------------------------------------= =2D---------------- [ 33.030323]=20 [ 33.030325] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D3 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030327] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030328] Call Trace: [ 33.030328] [] ? slab_err+0x8a/0x98 [ 33.030332] [] ? dump_stack+0x6a/0x71 [ 33.030335] [] ? on_freelist+0x169/0x19d [ 33.030337] [] ? free_iova_mem+0x13/0x15 [ 33.030339] [] ? free_debug_processing+0x5c/0x1a3 [ 33.030342] [] ? __slab_free+0xe4/0xf9 [ 33.030344] [] ? free_iova_mem+0x13/0x15 [ 33.030346] [] ? kmem_cache_free+0x5a/0x66 [ 33.030348] [] ? free_iova_mem+0x13/0x15 [ 33.030350] [] ? __free_iova+0x5a/0x62 [ 33.030352] [] ? flush_unmaps+0xee/0x12f [ 33.030355] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030357] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030359] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030362] [] ? run_timer_softirq+0x18f/0x21f [ 33.030364] [] ? lapic_next_event+0x18/0x1c [ 33.030366] [] ? __do_softirq+0x83/0x12a [ 33.030369] [] ? tick_program_event+0x1a/0x1c [ 33.030371] [] ? call_softirq+0x1c/0x28 [ 33.030373] [] ? do_softirq+0x33/0x68 [ 33.030375] [] ? irq_exit+0x36/0x78 [ 33.030377] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030380] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030381] [] ? intel_idle+0xc3/0xe9 [ 33.030385] [] ? intel_idle+0xa6/0xe9 [ 33.030387] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030389] [] ? cpu_idle+0x5a/0x91 [ 33.030391] [] ? rest_init+0x68/0x6a [ 33.030393] [] ? start_kernel+0x35e/0x369 [ 33.030395] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030398] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030399] FIX iommu_iova: Object count adjusted. [ 33.030400] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030402] BUG iommu_iova: Redzone overwritten [ 33.030403] ------------------------------------------------------------= =2D---------------- [ 33.030404]=20 [ 33.030405] INFO: 0xffff8800141a0028-0xffff8800141a002f. First byte 0xbb= instead of 0xcc [ 33.030407] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D4 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030409] INFO: Object 0xffff8800141a0000 @offset=3D0 fp=3D0xffff88001= 41a0080 [ 33.030410]=20 [ 33.030411] Object 0xffff8800141a0000: 80 00 1a 14 00 88 ff ff c0 04 = 1a 14 00 88 ff ff ......=FF=FF=C0.....=FF=FF [ 33.030417] Object 0xffff8800141a0010: 00 00 00 00 00 00 00 00 5f ff = 0f 00 00 00 00 00 ........_=FF...... [ 33.030423] Object 0xffff8800141a0020: 40 ff 0f 00 00 00 00 00 = @=FF...... =20 [ 33.030429] Redzone 0xffff8800141a0028: bb bb bb bb bb bb bb bb = =BB=BB=BB=BB=BB=BB=BB=BB =20 [ 33.030435] Padding 0xffff8800141a0030: ff ff ff ff ff ff ff ff ff fe = ff ff ff ff ff ff =FF=FF=FF=FF=FF=FF=FF=FF=FF=FE=FF=FF=FF=FF=FF=FF [ 33.030442] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030443] Call Trace: [ 33.030444] [] ? print_trailer+0x12e/0x137 [ 33.030448] [] ? check_bytes_and_report+0xb9/0xfd [ 33.030450] [] ? domain_get_iommu+0x18/0x46 [ 33.030452] [] ? check_object+0x49/0x194 [ 33.030454] [] ? free_iova_mem+0x13/0x15 [ 33.030457] [] ? free_debug_processing+0x7a/0x1a3 [ 33.030459] [] ? __slab_free+0xe4/0xf9 [ 33.030461] [] ? free_iova_mem+0x13/0x15 [ 33.030464] [] ? kmem_cache_free+0x5a/0x66 [ 33.030466] [] ? free_iova_mem+0x13/0x15 [ 33.030468] [] ? __free_iova+0x5a/0x62 [ 33.030470] [] ? flush_unmaps+0xee/0x12f [ 33.030472] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030474] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030477] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030479] [] ? run_timer_softirq+0x18f/0x21f [ 33.030482] [] ? lapic_next_event+0x18/0x1c [ 33.030484] [] ? __do_softirq+0x83/0x12a [ 33.030486] [] ? tick_program_event+0x1a/0x1c [ 33.030488] [] ? call_softirq+0x1c/0x28 [ 33.030490] [] ? do_softirq+0x33/0x68 [ 33.030492] [] ? irq_exit+0x36/0x78 [ 33.030495] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030497] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030498] [] ? intel_idle+0xc3/0xe9 [ 33.030502] [] ? intel_idle+0xa6/0xe9 [ 33.030505] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030506] [] ? cpu_idle+0x5a/0x91 [ 33.030508] [] ? rest_init+0x68/0x6a [ 33.030511] [] ? start_kernel+0x35e/0x369 [ 33.030513] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030515] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030517] FIX iommu_iova: Restoring 0xffff8800141a0028-0xffff8800141a0= 02f=3D0xcc [ 33.030518]=20 [ 33.030521] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030522] BUG iommu_iova: Wrong object count. Counter is 4 but counted= were 5 [ 33.030524] ------------------------------------------------------------= =2D---------------- [ 33.030525]=20 [ 33.030526] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D4 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030528] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030529] Call Trace: [ 33.030530] [] ? slab_err+0x8a/0x98 [ 33.030534] [] ? dump_stack+0x6a/0x71 [ 33.030536] [] ? on_freelist+0x169/0x19d [ 33.030538] [] ? free_iova_mem+0x13/0x15 [ 33.030541] [] ? free_debug_processing+0x5c/0x1a3 [ 33.030543] [] ? __slab_free+0xe4/0xf9 [ 33.030545] [] ? free_iova_mem+0x13/0x15 [ 33.030547] [] ? kmem_cache_free+0x5a/0x66 [ 33.030549] [] ? free_iova_mem+0x13/0x15 [ 33.030551] [] ? __free_iova+0x5a/0x62 [ 33.030553] [] ? flush_unmaps+0xee/0x12f [ 33.030556] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030558] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030560] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030563] [] ? run_timer_softirq+0x18f/0x21f [ 33.030565] [] ? lapic_next_event+0x18/0x1c [ 33.030567] [] ? __do_softirq+0x83/0x12a [ 33.030570] [] ? tick_program_event+0x1a/0x1c [ 33.030572] [] ? call_softirq+0x1c/0x28 [ 33.030574] [] ? do_softirq+0x33/0x68 [ 33.030576] [] ? irq_exit+0x36/0x78 [ 33.030578] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030581] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030582] [] ? intel_idle+0xc3/0xe9 [ 33.030586] [] ? intel_idle+0xa6/0xe9 [ 33.030588] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030590] [] ? cpu_idle+0x5a/0x91 [ 33.030592] [] ? rest_init+0x68/0x6a [ 33.030594] [] ? start_kernel+0x35e/0x369 [ 33.030596] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030599] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030600] FIX iommu_iova: Object count adjusted. [ 33.030601] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030603] BUG iommu_iova: Redzone overwritten [ 33.030604] ------------------------------------------------------------= =2D---------------- [ 33.030605]=20 [ 33.030606] INFO: 0xffff8800141a00a8-0xffff8800141a00af. First byte 0xbb= instead of 0xcc [ 33.030608] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D5 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030610] INFO: Object 0xffff8800141a0080 @offset=3D128 fp=3D0xffff880= 0141a0500 [ 33.030611]=20 [ 33.030612] Bytes b4 0xffff8800141a0070: e0 4f 61 81 ff ff ff ff 90 5d = b2 14 00 88 ff ff =E0Oa.=FF=FF=FF=FF.]=B2...=FF=FF [ 33.030618] Object 0xffff8800141a0080: 00 05 1a 14 00 88 ff ff c0 04 = 1a 14 00 88 ff ff ......=FF=FF=C0.....=FF=FF [ 33.030625] Object 0xffff8800141a0090: 00 00 00 00 00 00 00 00 3f ff = 0f 00 00 00 00 00 ........?=FF...... [ 33.030631] Object 0xffff8800141a00a0: 00 ff 0f 00 00 00 00 00 = .=FF...... =20 [ 33.030637] Redzone 0xffff8800141a00a8: bb bb bb bb bb bb bb bb = =BB=BB=BB=BB=BB=BB=BB=BB =20 [ 33.030643] Padding 0xffff8800141a00b0: 01 00 00 00 00 00 00 00 00 00 = 00 00 00 00 00 00 ................ [ 33.030649] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030651] Call Trace: [ 33.030651] [] ? print_trailer+0x12e/0x137 [ 33.030655] [] ? check_bytes_and_report+0xb9/0xfd [ 33.030658] [] ? domain_get_iommu+0x18/0x46 [ 33.030660] [] ? check_object+0x49/0x194 [ 33.030662] [] ? free_iova_mem+0x13/0x15 [ 33.030664] [] ? free_debug_processing+0x7a/0x1a3 [ 33.030667] [] ? __slab_free+0xe4/0xf9 [ 33.030669] [] ? free_iova_mem+0x13/0x15 [ 33.030671] [] ? kmem_cache_free+0x5a/0x66 [ 33.030673] [] ? free_iova_mem+0x13/0x15 [ 33.030675] [] ? __free_iova+0x5a/0x62 [ 33.030677] [] ? flush_unmaps+0xee/0x12f [ 33.030680] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030682] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030684] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030687] [] ? run_timer_softirq+0x18f/0x21f [ 33.030689] [] ? lapic_next_event+0x18/0x1c [ 33.030691] [] ? __do_softirq+0x83/0x12a [ 33.030694] [] ? tick_program_event+0x1a/0x1c [ 33.030696] [] ? call_softirq+0x1c/0x28 [ 33.030698] [] ? do_softirq+0x33/0x68 [ 33.030700] [] ? irq_exit+0x36/0x78 [ 33.030702] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030704] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030705] [] ? intel_idle+0xc3/0xe9 [ 33.030710] [] ? intel_idle+0xa6/0xe9 [ 33.030712] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030714] [] ? cpu_idle+0x5a/0x91 [ 33.030716] [] ? rest_init+0x68/0x6a [ 33.030718] [] ? start_kernel+0x35e/0x369 [ 33.030720] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030722] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030724] FIX iommu_iova: Restoring 0xffff8800141a00a8-0xffff8800141a0= 0af=3D0xcc [ 33.030725]=20 [ 33.030728] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030729] BUG iommu_iova: Wrong object count. Counter is 5 but counted= were 6 [ 33.030731] ------------------------------------------------------------= =2D---------------- [ 33.030732]=20 [ 33.030733] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D5 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030735] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030736] Call Trace: [ 33.030737] [] ? slab_err+0x8a/0x98 [ 33.030741] [] ? dump_stack+0x6a/0x71 [ 33.030743] [] ? on_freelist+0x169/0x19d [ 33.030745] [] ? free_iova_mem+0x13/0x15 [ 33.030748] [] ? free_debug_processing+0x5c/0x1a3 [ 33.030750] [] ? __slab_free+0xe4/0xf9 [ 33.030752] [] ? free_iova_mem+0x13/0x15 [ 33.030754] [] ? kmem_cache_free+0x5a/0x66 [ 33.030756] [] ? free_iova_mem+0x13/0x15 [ 33.030758] [] ? __free_iova+0x5a/0x62 [ 33.030761] [] ? flush_unmaps+0xee/0x12f [ 33.030763] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030766] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030769] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030772] [] ? run_timer_softirq+0x18f/0x21f [ 33.030775] [] ? lapic_next_event+0x18/0x1c [ 33.030777] [] ? __do_softirq+0x83/0x12a [ 33.030779] [] ? tick_program_event+0x1a/0x1c [ 33.030782] [] ? call_softirq+0x1c/0x28 [ 33.030784] [] ? do_softirq+0x33/0x68 [ 33.030786] [] ? irq_exit+0x36/0x78 [ 33.030788] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030791] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030792] [] ? intel_idle+0xc3/0xe9 [ 33.030797] [] ? intel_idle+0xa6/0xe9 [ 33.030799] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030801] [] ? cpu_idle+0x5a/0x91 [ 33.030803] [] ? rest_init+0x68/0x6a [ 33.030805] [] ? start_kernel+0x35e/0x369 [ 33.030807] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030809] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030811] FIX iommu_iova: Object count adjusted. [ 33.030812] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030814] BUG iommu_iova: Redzone overwritten [ 33.030815] ------------------------------------------------------------= =2D---------------- [ 33.030816]=20 [ 33.030817] INFO: 0xffff8800141a0528-0xffff8800141a052f. First byte 0xbb= instead of 0xcc [ 33.030819] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D6 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030821] INFO: Object 0xffff8800141a0500 @offset=3D1280 fp=3D0xffff88= 00141a0480 [ 33.030822]=20 [ 33.030823] Bytes b4 0xffff8800141a04f0: e0 4f 61 81 ff ff ff ff 70 5f = b2 14 00 88 ff ff =E0Oa.=FF=FF=FF=FFp_=B2...=FF=FF [ 33.030829] Object 0xffff8800141a0500: 80 04 1a 14 00 88 ff ff c0 04 = 1a 14 00 88 ff ff ......=FF=FF=C0.....=FF=FF [ 33.030835] Object 0xffff8800141a0510: 00 00 00 00 00 00 00 00 ff fe = 0f 00 00 00 00 00 ........=FF=FE...... [ 33.030842] Object 0xffff8800141a0520: e0 fe 0f 00 00 00 00 00 = =E0=FE...... =20 [ 33.030848] Redzone 0xffff8800141a0528: bb bb bb bb bb bb bb bb = =BB=BB=BB=BB=BB=BB=BB=BB =20 [ 33.030854] Padding 0xffff8800141a0530: 00 00 00 00 00 00 00 00 00 00 = 00 00 00 00 00 00 ................ [ 33.030860] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030861] Call Trace: [ 33.030862] [] ? print_trailer+0x12e/0x137 [ 33.030866] [] ? check_bytes_and_report+0xb9/0xfd [ 33.030868] [] ? domain_get_iommu+0x18/0x46 [ 33.030871] [] ? check_object+0x49/0x194 [ 33.030873] [] ? free_iova_mem+0x13/0x15 [ 33.030875] [] ? free_debug_processing+0x7a/0x1a3 [ 33.030877] [] ? __slab_free+0xe4/0xf9 [ 33.030879] [] ? free_iova_mem+0x13/0x15 [ 33.030882] [] ? kmem_cache_free+0x5a/0x66 [ 33.030884] [] ? free_iova_mem+0x13/0x15 [ 33.030886] [] ? __free_iova+0x5a/0x62 [ 33.030888] [] ? flush_unmaps+0xee/0x12f [ 33.030890] [] ? sched_clock_cpu+0x46/0xd1 [ 33.030893] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.030895] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.030897] [] ? run_timer_softirq+0x18f/0x21f [ 33.030900] [] ? lapic_next_event+0x18/0x1c [ 33.030902] [] ? __do_softirq+0x83/0x12a [ 33.030904] [] ? tick_program_event+0x1a/0x1c [ 33.030907] [] ? call_softirq+0x1c/0x28 [ 33.030909] [] ? do_softirq+0x33/0x68 [ 33.030911] [] ? irq_exit+0x36/0x78 [ 33.030913] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.030915] [] ? apic_timer_interrupt+0x13/0x20 [ 33.030916] [] ? intel_idle+0xc3/0xe9 [ 33.030921] [] ? intel_idle+0xa6/0xe9 [ 33.030923] [] ? cpuidle_idle_call+0x94/0xcd [ 33.030925] [] ? cpu_idle+0x5a/0x91 [ 33.030927] [] ? rest_init+0x68/0x6a [ 33.030929] [] ? start_kernel+0x35e/0x369 [ 33.030931] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.030933] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.030935] FIX iommu_iova: Restoring 0xffff8800141a0528-0xffff8800141a0= 52f=3D0xcc [ 33.030936]=20 [ 33.030938] =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D [ 33.030939] BUG iommu_iova: Object already free [ 33.030940] ------------------------------------------------------------= =2D---------------- [ 33.030941]=20 [ 33.030942] INFO: Slab 0xffffea0000465b00 objects=3D64 used=3D6 fp=3D0xf= fff8800141a04c0 flags=3D0x40000000000000c1 [ 33.030944] INFO: Object 0xffff8800141a04c0 @offset=3D1216 fp=3D0xffff88= 00141a0480 [ 33.030945]=20 [ 33.030946] Bytes b4 0xffff8800141a04b0: ff ff ff ff ff ff ff ff ff fe = ff ff ff ff ff ff =FF=FF=FF=FF=FF=FF=FF=FF=FF=FE=FF=FF=FF=FF=FF=FF [ 33.030952] Object 0xffff8800141a04c0: 80 04 1a 14 00 88 ff ff 00 00 = 00 00 00 00 00 00 ......=FF=FF........ [ 33.030959] Object 0xffff8800141a04d0: 00 00 00 00 00 00 00 00 ff ff = 0f 00 00 00 00 00 ........=FF=FF...... [ 33.030965] Object 0xffff8800141a04e0: fe ff 0f 00 00 00 00 00 = =FE=FF...... =20 [ 33.030971] Redzone 0xffff8800141a04e8: bb bb bb bb bb bb bb bb = =BB=BB=BB=BB=BB=BB=BB=BB =20 [ 33.030977] Padding 0xffff8800141a04f0: e0 4f 61 81 ff ff ff ff 70 5f = b2 14 00 88 ff ff =E0Oa.=FF=FF=FF=FFp_=B2...=FF=FF [ 33.030984] Pid: 0, comm: swapper Not tainted 2.6.38.6-dbg #1 [ 33.030985] Call Trace: [ 33.030985] [] ? print_trailer+0x12e/0x137 [ 33.030989] [] ? free_iova_mem+0x13/0x15 [ 33.030991] [] ? object_err+0x35/0x3d [ 33.030994] [] ? free_debug_processing+0xe5/0x1a3 [ 33.030996] [] ? __slab_free+0xe4/0xf9 [ 33.030998] [] ? free_iova_mem+0x13/0x15 [ 33.031001] [] ? kmem_cache_free+0x5a/0x66 [ 33.031003] [] ? free_iova_mem+0x13/0x15 [ 33.031005] [] ? __free_iova+0x5a/0x62 [ 33.031007] [] ? flush_unmaps+0xee/0x12f [ 33.031009] [] ? sched_clock_cpu+0x46/0xd1 [ 33.031011] [] ? flush_unmaps_timeout+0x0/0x30 [ 33.031014] [] ? flush_unmaps_timeout+0x1d/0x30 [ 33.031016] [] ? run_timer_softirq+0x18f/0x21f [ 33.031019] [] ? lapic_next_event+0x18/0x1c [ 33.031021] [] ? __do_softirq+0x83/0x12a [ 33.031023] [] ? tick_program_event+0x1a/0x1c [ 33.031025] [] ? call_softirq+0x1c/0x28 [ 33.031027] [] ? do_softirq+0x33/0x68 [ 33.031029] [] ? irq_exit+0x36/0x78 [ 33.031032] [] ? smp_apic_timer_interrupt+0x88/0x96 [ 33.031034] [] ? apic_timer_interrupt+0x13/0x20 [ 33.031035] [] ? intel_idle+0xc3/0xe9 [ 33.031039] [] ? intel_idle+0xa6/0xe9 [ 33.031041] [] ? cpuidle_idle_call+0x94/0xcd [ 33.031043] [] ? cpu_idle+0x5a/0x91 [ 33.031045] [] ? rest_init+0x68/0x6a [ 33.031047] [] ? start_kernel+0x35e/0x369 [ 33.031050] [] ? x86_64_start_reservations+0xb8/0xbc [ 33.031052] [] ? x86_64_start_kernel+0xf2/0xf9 [ 33.031054] FIX iommu_iova: Object at 0xffff8800141a04c0 not freed [ 34.937801] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in= =2Dtree: [ 34.937804] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 34.937893] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ= 17 [ 34.937942] iwlagn 0000:03:00.0: setting latency timer to 64 [ 34.938028] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-= N 1030 BGN, REV=3D0xB0 [ 34.955091] iwlagn 0000:03:00.0: device EEPROM VER=3D0x716, CALIB=3D0x6 [ 34.955092] iwlagn 0000:03:00.0: Device SKU: 0X9 [ 34.955094] iwlagn 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 34.955108] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11= a channels [ 34.955510] iwlagn 0000:03:00.0: irq 50 for MSI/MSI-X [ 34.955931] PM: Adding info for No Bus:0000:03:00.0 [ 34.957953] PM: Removing info for No Bus:0000:03:00.0 [ 34.958019] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.2 buil= d 35905 [ 34.958558] PM: Adding info for No Bus:phy1 [ 34.958596] PM: Adding info for No Bus:rfkill1 [ 34.958630] ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' [ 34.958702] PM: Adding info for No Bus:wlan0 --Boundary-00=_dI/0NlIKhSVqAJm Content-Type: text/plain; charset="us-ascii"; name="dmesg-kexec.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-kexec.txt" <6>[ 0.000000] Initializing cgroup subsys cpuset <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 2.6.38.6-dbg (root@cnulaptop) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 SMP Wed May 18 17:39:58 CEST 2011 <6>[ 0.000000] Command line: root=/dev/sda6 crashkernel=160M mem=512M <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) <6>[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bac8f000 (usable) <6>[ 0.000000] BIOS-e820: 00000000bac8f000 - 00000000bacac000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000bacac000 - 00000000bacba000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000bacba000 - 00000000badfa000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000badfa000 - 00000000badfc000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000badfc000 - 00000000badfe000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000badfe000 - 00000000bae01000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000bae01000 - 00000000bae04000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000bae04000 - 00000000bae05000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000bae05000 - 00000000bae0a000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000bae1b000 - 00000000baf18000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000baf18000 - 00000000baf1c000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000baf1c000 - 00000000baf1f000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) <6>[ 0.000000] BIOS-e820: 00000000baf9f000 - 00000000bafff000 (ACPI data) <6>[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable) <6>[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <6>[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) <6>[ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable) <7>[ 0.000000] e820 remove range: 0000000020000000 - ffffffffffffffff (usable) <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] user-defined physical RAM map: <6>[ 0.000000] user: 0000000000000000 - 000000000009d800 (usable) <6>[ 0.000000] user: 000000000009d800 - 00000000000a0000 (reserved) <6>[ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved) <6>[ 0.000000] user: 0000000000100000 - 0000000020000000 (usable) <6>[ 0.000000] user: 00000000bac8f000 - 00000000bacac000 (reserved) <6>[ 0.000000] user: 00000000bacac000 - 00000000bacba000 (ACPI NVS) <6>[ 0.000000] user: 00000000bacba000 - 00000000badfa000 (reserved) <6>[ 0.000000] user: 00000000badfa000 - 00000000badfc000 (ACPI NVS) <6>[ 0.000000] user: 00000000badfc000 - 00000000badfe000 (reserved) <6>[ 0.000000] user: 00000000badfe000 - 00000000bae01000 (ACPI NVS) <6>[ 0.000000] user: 00000000bae01000 - 00000000bae04000 (reserved) <6>[ 0.000000] user: 00000000bae04000 - 00000000bae05000 (ACPI NVS) <6>[ 0.000000] user: 00000000bae05000 - 00000000bae0a000 (reserved) <6>[ 0.000000] user: 00000000bae0a000 - 00000000bae1b000 (ACPI NVS) <6>[ 0.000000] user: 00000000bae1b000 - 00000000baf18000 (reserved) <6>[ 0.000000] user: 00000000baf18000 - 00000000baf1c000 (ACPI NVS) <6>[ 0.000000] user: 00000000baf1c000 - 00000000baf1f000 (reserved) <6>[ 0.000000] user: 00000000baf1f000 - 00000000baf9f000 (ACPI NVS) <6>[ 0.000000] user: 00000000baf9f000 - 00000000bafff000 (ACPI data) <6>[ 0.000000] user: 00000000bb000000 - 00000000bfa00000 (reserved) <6>[ 0.000000] user: 00000000f8000000 - 00000000fc000000 (reserved) <6>[ 0.000000] user: 00000000fec00000 - 00000000fec01000 (reserved) <6>[ 0.000000] user: 00000000fed08000 - 00000000fed09000 (reserved) <6>[ 0.000000] user: 00000000fed10000 - 00000000fed1a000 (reserved) <6>[ 0.000000] user: 00000000fed1c000 - 00000000fed20000 (reserved) <6>[ 0.000000] user: 00000000fee00000 - 00000000fee01000 (reserved) <6>[ 0.000000] user: 00000000ffd80000 - 0000000100000000 (reserved) <6>[ 0.000000] DMI 2.6 present. <7>[ 0.000000] DMI: Dell Inc. Dell System XPS L502X/0YR8NN, BIOS A04 03/25/2011 <7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) <7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) <6>[ 0.000000] No AGP bridge found <6>[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000 <7>[ 0.000000] MTRR default type: uncachable <7>[ 0.000000] MTRR fixed ranges enabled: <7>[ 0.000000] 00000-9FFFF write-back <7>[ 0.000000] A0000-BFFFF uncachable <7>[ 0.000000] C0000-FFFFF write-protect <7>[ 0.000000] MTRR variable ranges enabled: <7>[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect <7>[ 0.000000] 1 base 000000000 mask F80000000 write-back <7>[ 0.000000] 2 base 080000000 mask FC0000000 write-back <7>[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable <7>[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable <7>[ 0.000000] 5 base 100000000 mask F00000000 write-back <7>[ 0.000000] 6 base 200000000 mask FC0000000 write-back <7>[ 0.000000] 7 base 23FE00000 mask FFFE00000 uncachable <7>[ 0.000000] 8 disabled <7>[ 0.000000] 9 disabled <6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <7>[ 0.000000] initial memory mapped : 0 - 20000000 <6>[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 <7>[ 0.000000] 0000000000 - 0020000000 page 2M <7>[ 0.000000] kernel direct mapping tables up to 20000000 @ 1fffe000-20000000 <6>[ 0.000000] Reserving 160MB of memory at 352MB for crashkernel (System RAM: 512MB) <4>[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 DELL ) <4>[ 0.000000] ACPI: XSDT 00000000baffe120 00094 (v01 DELL QA09 00000002 LOHR 00000002) <4>[ 0.000000] ACPI: FACP 00000000bafef000 000F4 (v03 DELL QA09 00000002 PTL 00000002) <4>[ 0.000000] ACPI: DSDT 00000000baff2000 08C85 (v02 DELL SNB-CPT 00000000 INTL 20061109) <4>[ 0.000000] ACPI: FACS 00000000baf3f000 00040 <4>[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001) <4>[ 0.000000] ACPI: SSDT 00000000baffb000 01068 (v01 DELL PtidDevc 00001000 INTL 20061109) <4>[ 0.000000] ACPI: ASF! 00000000baff1000 000A5 (v32 DELL QA09 00000002 PTL 00000002) <4>[ 0.000000] ACPI: HPET 00000000bafee000 00038 (v01 DELL QA09 00000002 PTL 00000002) <4>[ 0.000000] ACPI: APIC 00000000bafed000 00098 (v01 DELL QA09 00000002 PTL 00000002) <4>[ 0.000000] ACPI: MCFG 00000000bafec000 0003C (v01 DELL QA09 00000002 PTL 00000002) <4>[ 0.000000] ACPI: SSDT 00000000bafea000 01217 (v01 NvORef NvOptTbl 00001000 INTL 20061109) <4>[ 0.000000] ACPI: SSDT 00000000bafe9000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) <4>[ 0.000000] ACPI: SSDT 00000000bafe8000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) <4>[ 0.000000] ACPI: UEFI 00000000bafe7000 0003E (v01 DELL QA09 00000002 PTL 00000002) <4>[ 0.000000] ACPI: UEFI 00000000bafe6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) <4>[ 0.000000] ACPI: DMAR 00000000bafe5000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) <4>[ 0.000000] ACPI: UEFI 00000000bafe4000 0026A (v01 DELL QA09 00000002 PTL 00000002) <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <7>[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880014e00000-ffff8800155fffff] on node 0 <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] DMA 0x00000010 -> 0x00001000 <4>[ 0.000000] DMA32 0x00001000 -> 0x00100000 <4>[ 0.000000] Normal empty <4>[ 0.000000] Movable zone start PFN for each node <4>[ 0.000000] early_node_map[2] active PFN ranges <4>[ 0.000000] 0: 0x00000010 -> 0x0000009d <4>[ 0.000000] 0: 0x00000100 -> 0x00020000 <7>[ 0.000000] On node 0 totalpages: 130957 <7>[ 0.000000] DMA zone: 56 pages used for memmap <7>[ 0.000000] DMA zone: 6 pages reserved <7>[ 0.000000] DMA zone: 3919 pages, LIFO batch:0 <7>[ 0.000000] DMA32 zone: 1736 pages used for memmap <7>[ 0.000000] DMA32 zone: 125240 pages, LIFO batch:31 <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) <6>[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>[ 0.000000] ACPI: IRQ0 used by override. <7>[ 0.000000] ACPI: IRQ2 used by override. <7>[ 0.000000] ACPI: IRQ9 used by override. <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <6>[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 <6>[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs <7>[ 0.000000] nr_irqs_gsi: 40 <6>[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 <6>[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 <6>[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 <6>[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:9ac8f000) <6>[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880015c00000 s74880 r8192 d23424 u262144 <7>[ 0.000000] pcpu-alloc: s74880 r8192 d23424 u262144 alloc=1*2097152 <7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129159 <5>[ 0.000000] Kernel command line: root=/dev/sda6 crashkernel=160M mem=512M <6>[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) <6>[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 <6>[ 0.000000] Checking aperture... <6>[ 0.000000] No AGP bridge found <6>[ 0.000000] Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.000000] Memory: 342504k/524288k available (3495k kernel code, 460k absent, 181324k reserved, 2945k data, 428k init) <6>[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.000000] Hierarchical RCU implementation. <6>[ 0.000000] RCU-based detection of stalled CPUs is disabled. <6>[ 0.000000] NR_IRQS:4352 nr_irqs:744 16 <6>[ 0.000000] Extended CMOS year: 2000 <4>[ 0.000000] Console: colour VGA+ 80x25 <6>[ 0.000000] console [tty0] enabled <7>[ 0.000000] hpet clockevent registered <4>[ 0.000000] Fast TSC calibration using PIT <4>[ 0.001000] Detected 2594.241 MHz processor. <6>[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.48 BogoMIPS (lpj=2594241) <6>[ 0.000191] pid_max: default: 32768 minimum: 301 <4>[ 0.000313] Mount-cache hash table entries: 256 <6>[ 0.000499] Initializing cgroup subsys ns <4>[ 0.000592] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. <6>[ 0.000740] Initializing cgroup subsys cpuacct <6>[ 0.000836] Initializing cgroup subsys freezer <6>[ 0.000950] CPU: Physical Processor ID: 0 <6>[ 0.001052] CPU: Processor Core ID: 0 <6>[ 0.001146] mce: CPU supports 7 MCE banks <7>[ 0.001245] CPU0: Thermal monitoring handled by SMI <6>[ 0.001250] using mwait in idle threads. <6>[ 0.001388] ACPI: Core revision 20110112 <6>[ 0.056813] DMAR: Host address width 36 <6>[ 0.056916] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 <6>[ 0.057015] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a <6>[ 0.057161] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 <6>[ 0.057259] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a <6>[ 0.057406] DMAR: RMRR base: 0x000000bae1d000 end: 0x000000bae33fff <6>[ 0.057503] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff <6>[ 0.057600] DMAR: No ATSR found <6>[ 0.057760] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 <6>[ 0.057857] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.057951] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.058044] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.058138] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.058232] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.059659] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.059753] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.059847] HPET id 0 under DRHD base 0xfed91000 <6>[ 0.060183] Enabled Interrupt-remapping <6>[ 0.060291] Setting APIC routing to flat <6>[ 0.060758] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.070837] CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz stepping 07 <6>[ 0.172654] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver. <6>[ 0.172921] ... version: 3 <6>[ 0.173014] ... bit width: 48 <6>[ 0.173107] ... generic registers: 4 <6>[ 0.173201] ... value mask: 0000ffffffffffff <6>[ 0.173296] ... max period: 000000007fffffff <6>[ 0.173391] ... fixed-purpose events: 3 <6>[ 0.173484] ... event mask: 000000070000000f <6>[ 0.173692] Booting Node 0, Processors #1 <7>[ 0.244530] CPU1: Thermal monitoring handled by SMI <4>[ 0.264630] #2 <7>[ 0.335345] CPU2: Thermal monitoring handled by SMI <4>[ 0.355467] #3 <7>[ 0.426162] CPU3: Thermal monitoring handled by SMI <6>[ 0.446152] Brought up 4 CPUs <6>[ 0.446334] Total of 4 processors activated (20751.12 BogoMIPS). <7>[ 0.448084] PM: Adding info for No Bus:platform <4>[ 0.448371] Time: 15:43:25 Date: 05/18/11 <6>[ 0.448496] NET: Registered protocol family 16 <7>[ 0.448702] PM: Adding info for No Bus:vtcon0 <6>[ 0.448728] ACPI: bus type pci registered <7>[ 0.448857] PM: Adding info for No Bus:id <6>[ 0.448896] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) <6>[ 0.449047] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 <6>[ 0.452753] PCI: Using configuration type 1 for base access <7>[ 0.454912] PM: Adding info for No Bus:default <4>[ 0.454946] bio: create slab at 0 <7>[ 0.456473] ACPI: EC: Look up EC in DSDT <4>[ 0.457777] ACPI: Executed 1 blocks of module-level executable AML code <5>[ 0.467117] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored <4>[ 0.470039] ACPI: SSDT 00000000bae06718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) <4>[ 0.470620] ACPI: Dynamic OEM Table Load: <4>[ 0.470791] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109) <4>[ 0.473365] ACPI: SSDT 00000000bae07a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) <4>[ 0.473976] ACPI: Dynamic OEM Table Load: <4>[ 0.474149] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) <4>[ 0.477220] ACPI: SSDT 00000000bae05d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) <4>[ 0.477787] ACPI: Dynamic OEM Table Load: <4>[ 0.477959] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) <6>[ 0.484244] ACPI: Interpreter enabled <6>[ 0.484339] ACPI: (supports S0 S3 S4 S5) <6>[ 0.484604] ACPI: Using IOAPIC for interrupt routing <7>[ 0.484787] PM: Adding info for acpi:LNXSYSTM:00 <7>[ 0.484827] PM: Adding info for acpi:LNXCPU:00 <7>[ 0.484869] PM: Adding info for acpi:LNXCPU:01 <7>[ 0.484905] PM: Adding info for acpi:LNXCPU:02 <7>[ 0.484941] PM: Adding info for acpi:LNXCPU:03 <7>[ 0.484975] PM: Adding info for acpi:LNXCPU:04 <7>[ 0.485010] PM: Adding info for acpi:LNXCPU:05 <7>[ 0.485046] PM: Adding info for acpi:LNXCPU:06 <7>[ 0.485081] PM: Adding info for acpi:LNXCPU:07 <7>[ 0.485128] PM: Adding info for acpi:device:00 <7>[ 0.485175] PM: Adding info for acpi:PNP0C14:00 <7>[ 0.485246] PM: Adding info for acpi:PNP0A08:00 <7>[ 0.485371] PM: Adding info for acpi:device:01 <7>[ 0.485415] PM: Adding info for acpi:device:02 <7>[ 0.485460] PM: Adding info for acpi:PNP0200:00 <7>[ 0.485548] PM: Adding info for acpi:PNP0103:00 <7>[ 0.485592] PM: Adding info for acpi:PNP0000:00 <7>[ 0.485634] PM: Adding info for acpi:PNP0C04:00 <7>[ 0.485678] PM: Adding info for acpi:PNP0C02:00 <7>[ 0.485721] PM: Adding info for acpi:PNP0B00:00 <7>[ 0.485763] PM: Adding info for acpi:PNP0100:00 <7>[ 0.485827] PM: Adding info for acpi:INT3F0D:00 <7>[ 0.485884] PM: Adding info for acpi:PNP0C09:00 <7>[ 0.486040] PM: Adding info for acpi:PNP0303:00 <7>[ 0.486136] PM: Adding info for acpi:DLL04B6:00 <7>[ 0.486184] PM: Adding info for acpi:PNP0C02:01 <7>[ 0.486324] PM: Adding info for acpi:device:03 <7>[ 0.486369] PM: Adding info for acpi:device:04 <7>[ 0.486410] PM: Adding info for acpi:device:05 <7>[ 0.486452] PM: Adding info for acpi:device:06 <7>[ 0.486493] PM: Adding info for acpi:device:07 <7>[ 0.486535] PM: Adding info for acpi:device:08 <7>[ 0.486576] PM: Adding info for acpi:device:09 <7>[ 0.486618] PM: Adding info for acpi:device:0a <7>[ 0.486660] PM: Adding info for acpi:device:0b <7>[ 0.486702] PM: Adding info for acpi:device:0c <7>[ 0.486744] PM: Adding info for acpi:device:0d <7>[ 0.486786] PM: Adding info for acpi:device:0e <7>[ 0.486919] PM: Adding info for acpi:device:0f <7>[ 0.486963] PM: Adding info for acpi:device:10 <7>[ 0.487005] PM: Adding info for acpi:device:11 <7>[ 0.487049] PM: Adding info for acpi:device:12 <7>[ 0.487105] PM: Adding info for acpi:device:13 <7>[ 0.487149] PM: Adding info for acpi:device:14 <7>[ 0.487191] PM: Adding info for acpi:device:15 <7>[ 0.487233] PM: Adding info for acpi:device:16 <7>[ 0.487274] PM: Adding info for acpi:device:17 <7>[ 0.487316] PM: Adding info for acpi:device:18 <7>[ 0.487422] PM: Adding info for acpi:device:19 <7>[ 0.487528] PM: Adding info for acpi:device:1a <7>[ 0.487580] PM: Adding info for acpi:device:1b <7>[ 0.487686] PM: Adding info for acpi:device:1c <7>[ 0.487738] PM: Adding info for acpi:device:1d <7>[ 0.487843] PM: Adding info for acpi:device:1e <7>[ 0.487896] PM: Adding info for acpi:device:1f <7>[ 0.488014] PM: Adding info for acpi:device:20 <7>[ 0.488071] PM: Adding info for acpi:device:21 <7>[ 0.488180] PM: Adding info for acpi:device:22 <7>[ 0.488234] PM: Adding info for acpi:device:23 <7>[ 0.488278] PM: Adding info for acpi:device:24 <7>[ 0.488323] PM: Adding info for acpi:device:25 <7>[ 0.488366] PM: Adding info for acpi:device:26 <7>[ 0.488408] PM: Adding info for acpi:device:27 <7>[ 0.488449] PM: Adding info for acpi:device:28 <7>[ 0.488555] PM: Adding info for acpi:device:29 <7>[ 0.488608] PM: Adding info for acpi:device:2a <7>[ 0.488712] PM: Adding info for acpi:device:2b <7>[ 0.488766] PM: Adding info for acpi:device:2c <7>[ 0.488872] PM: Adding info for acpi:device:2d <7>[ 0.488925] PM: Adding info for acpi:device:2e <7>[ 0.488970] PM: Adding info for acpi:device:2f <7>[ 0.489011] PM: Adding info for acpi:device:30 <7>[ 0.489060] PM: Adding info for acpi:device:31 <7>[ 0.489130] PM: Adding info for acpi:device:32 <7>[ 0.489193] PM: Adding info for acpi:device:33 <7>[ 0.489266] PM: Adding info for acpi:LNXVIDEO:00 <7>[ 0.489359] PM: Adding info for acpi:LNXVIDEO:01 <7>[ 0.489425] PM: Adding info for acpi:device:34 <7>[ 0.489486] PM: Adding info for acpi:device:35 <7>[ 0.489547] PM: Adding info for acpi:device:36 <7>[ 0.489608] PM: Adding info for acpi:device:37 <7>[ 0.489670] PM: Adding info for acpi:device:38 <7>[ 0.489730] PM: Adding info for acpi:device:39 <7>[ 0.489792] PM: Adding info for acpi:device:3a <7>[ 0.489853] PM: Adding info for acpi:device:3b <7>[ 0.489939] PM: Adding info for acpi:SMO8800:00 <7>[ 0.490028] PM: Adding info for acpi:PNP0C0F:00 <7>[ 0.490099] PM: Adding info for acpi:PNP0C0F:01 <7>[ 0.490171] PM: Adding info for acpi:PNP0C0F:02 <7>[ 0.490241] PM: Adding info for acpi:PNP0C0F:03 <7>[ 0.490312] PM: Adding info for acpi:PNP0C0F:04 <7>[ 0.490382] PM: Adding info for acpi:PNP0C0F:05 <7>[ 0.490452] PM: Adding info for acpi:PNP0C0F:06 <7>[ 0.490523] PM: Adding info for acpi:PNP0C0F:07 <7>[ 0.490569] PM: Adding info for acpi:PNP0C0C:00 <7>[ 0.490614] PM: Adding info for acpi:PNP0C0E:00 <7>[ 0.491444] PM: Adding info for acpi:PNP0C0D:00 <7>[ 0.491511] PM: Adding info for acpi:ACPI0003:00 <7>[ 0.491584] PM: Adding info for acpi:PNP0C0A:00 <7>[ 0.491644] PM: Adding info for acpi:INT340E:00 <7>[ 0.491694] PM: Adding info for acpi:device:3c <7>[ 0.491727] PM: Adding info for acpi:LNXTHERM:00 <7>[ 0.491764] PM: Adding info for acpi:LNXTHERM:01 <7>[ 0.491909] PM: Adding info for acpi:LNXPWRBN:00 <6>[ 0.492034] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 <6>[ 0.495224] ACPI: No dock devices found. <6>[ 0.495319] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <7>[ 0.495783] \_SB_.PCI0:_OSC invalid UUID <7>[ 0.495784] _OSC request data:1 8 1f <6>[ 0.495787] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) <7>[ 0.495899] PM: Adding info for No Bus:pci0000:00 <7>[ 0.495909] PM: Adding info for No Bus:0000:00 <6>[ 0.496455] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] <6>[ 0.496554] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] <6>[ 0.496652] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] <6>[ 0.496799] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff] <6>[ 0.496945] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] <7>[ 0.497103] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 <7>[ 0.497124] pci 0000:00:00.0: rpm_resume flags 0x0 <7>[ 0.497126] pci 0000:00:00.0: rpm_resume returns -11 <7>[ 0.497137] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 <7>[ 0.497157] pci 0000:00:01.0: rpm_resume flags 0x0 <7>[ 0.497158] pci 0000:00:01.0: rpm_resume returns -11 <7>[ 0.497162] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold <7>[ 0.497164] pci 0000:00:01.0: PME# disabled <7>[ 0.497183] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300 <7>[ 0.497192] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit] <7>[ 0.497197] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] <7>[ 0.497202] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f] <7>[ 0.497214] pci 0000:00:02.0: rpm_resume flags 0x0 <7>[ 0.497215] pci 0000:00:02.0: rpm_resume returns -11 <7>[ 0.497251] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 <7>[ 0.497274] pci 0000:00:16.0: reg 10: [mem 0xf1c05000-0xf1c0500f 64bit] <7>[ 0.497330] pci 0000:00:16.0: rpm_resume flags 0x0 <7>[ 0.497331] pci 0000:00:16.0: rpm_resume returns -11 <7>[ 0.497338] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold <7>[ 0.497342] pci 0000:00:16.0: PME# disabled <7>[ 0.497373] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 <7>[ 0.497394] pci 0000:00:1a.0: reg 10: [mem 0xf1c0a000-0xf1c0a3ff] <7>[ 0.497461] pci 0000:00:1a.0: rpm_resume flags 0x0 <7>[ 0.497462] pci 0000:00:1a.0: rpm_resume returns -11 <7>[ 0.497468] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold <7>[ 0.497473] pci 0000:00:1a.0: PME# disabled <7>[ 0.497496] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 <7>[ 0.497511] pci 0000:00:1b.0: reg 10: [mem 0xf1c00000-0xf1c03fff 64bit] <7>[ 0.497560] pci 0000:00:1b.0: rpm_resume flags 0x0 <7>[ 0.497562] pci 0000:00:1b.0: rpm_resume returns -11 <7>[ 0.497567] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold <7>[ 0.497571] pci 0000:00:1b.0: PME# disabled <7>[ 0.497596] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 <7>[ 0.497680] pci 0000:00:1c.0: rpm_resume flags 0x0 <7>[ 0.497681] pci 0000:00:1c.0: rpm_resume returns -11 <7>[ 0.497700] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <7>[ 0.497704] pci 0000:00:1c.0: PME# disabled <7>[ 0.497738] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 <7>[ 0.497822] pci 0000:00:1c.1: rpm_resume flags 0x0 <7>[ 0.497823] pci 0000:00:1c.1: rpm_resume returns -11 <7>[ 0.497842] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold <7>[ 0.497847] pci 0000:00:1c.1: PME# disabled <7>[ 0.497882] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 <7>[ 0.497966] pci 0000:00:1c.3: rpm_resume flags 0x0 <7>[ 0.497967] pci 0000:00:1c.3: rpm_resume returns -11 <7>[ 0.497986] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold <7>[ 0.497992] pci 0000:00:1c.3: PME# disabled <7>[ 0.498025] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 <7>[ 0.498075] pci 0000:00:1c.4: rpm_resume flags 0x0 <7>[ 0.498077] pci 0000:00:1c.4: rpm_resume returns -11 <7>[ 0.498089] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <7>[ 0.498093] pci 0000:00:1c.4: PME# disabled <7>[ 0.498116] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 <7>[ 0.498166] pci 0000:00:1c.5: rpm_resume flags 0x0 <7>[ 0.498167] pci 0000:00:1c.5: rpm_resume returns -11 <7>[ 0.498179] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold <7>[ 0.498183] pci 0000:00:1c.5: PME# disabled <7>[ 0.498213] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 <7>[ 0.498233] pci 0000:00:1d.0: reg 10: [mem 0xf1c09000-0xf1c093ff] <7>[ 0.498301] pci 0000:00:1d.0: rpm_resume flags 0x0 <7>[ 0.498302] pci 0000:00:1d.0: rpm_resume returns -11 <7>[ 0.498308] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold <7>[ 0.498312] pci 0000:00:1d.0: PME# disabled <7>[ 0.498337] pci 0000:00:1f.0: [8086:1c4b] type 0 class 0x000601 <7>[ 0.498424] pci 0000:00:1f.0: rpm_resume flags 0x0 <7>[ 0.498425] pci 0000:00:1f.0: rpm_resume returns -11 <7>[ 0.498452] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 <7>[ 0.498470] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f] <7>[ 0.498478] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097] <7>[ 0.498486] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087] <7>[ 0.498494] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093] <7>[ 0.498502] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f] <7>[ 0.498510] pci 0000:00:1f.2: reg 24: [mem 0xf1c08000-0xf1c087ff] <7>[ 0.498537] pci 0000:00:1f.2: rpm_resume flags 0x0 <7>[ 0.498538] pci 0000:00:1f.2: rpm_resume returns -11 <7>[ 0.498545] pci 0000:00:1f.2: PME# supported from D3hot <7>[ 0.498549] pci 0000:00:1f.2: PME# disabled <7>[ 0.498567] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 <7>[ 0.498582] pci 0000:00:1f.3: reg 10: [mem 0xf1c04000-0xf1c040ff 64bit] <7>[ 0.498603] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] <7>[ 0.498622] pci 0000:00:1f.3: rpm_resume flags 0x0 <7>[ 0.498623] pci 0000:00:1f.3: rpm_resume returns -11 <7>[ 0.498656] pci 0000:01:00.0: [10de:0df5] type 0 class 0x000300 <7>[ 0.498664] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] <7>[ 0.498672] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] <7>[ 0.498680] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] <7>[ 0.498686] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f] <7>[ 0.498691] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] <7>[ 0.498705] pci 0000:01:00.0: rpm_resume flags 0x0 <7>[ 0.498706] pci 0000:01:00.0: rpm_resume returns -11 <6>[ 0.500018] pci 0000:00:01.0: PCI bridge to [bus 01-01] <7>[ 0.500158] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] <7>[ 0.500161] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] <7>[ 0.500164] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] <6>[ 0.500236] pci 0000:00:1c.0: PCI bridge to [bus 02-02] <7>[ 0.500335] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) <7>[ 0.500340] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) <7>[ 0.500348] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>[ 0.500570] pci 0000:03:00.0: [8086:008a] type 0 class 0x000280 <7>[ 0.500717] pci 0000:03:00.0: reg 10: [mem 0xf1b00000-0xf1b01fff 64bit] <7>[ 0.501266] pci 0000:03:00.0: rpm_resume flags 0x0 <7>[ 0.501267] pci 0000:03:00.0: rpm_resume returns -11 <7>[ 0.501321] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold <7>[ 0.501356] pci 0000:03:00.0: PME# disabled <6>[ 0.503140] pci 0000:00:1c.1: PCI bridge to [bus 03-03] <7>[ 0.503238] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) <7>[ 0.503244] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] <7>[ 0.503252] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>[ 0.503396] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03 <7>[ 0.503422] pci 0000:04:00.0: reg 10: [mem 0xf1a00000-0xf1a01fff 64bit] <7>[ 0.503520] pci 0000:04:00.0: rpm_resume flags 0x0 <7>[ 0.503521] pci 0000:04:00.0: rpm_resume returns -11 <7>[ 0.503530] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold <7>[ 0.503535] pci 0000:04:00.0: PME# disabled <6>[ 0.505063] pci 0000:00:1c.3: PCI bridge to [bus 04-04] <7>[ 0.505185] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) <7>[ 0.505189] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] <7>[ 0.505196] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <6>[ 0.505240] pci 0000:00:1c.4: PCI bridge to [bus 05-05] <7>[ 0.505337] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) <7>[ 0.505342] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] <7>[ 0.505348] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>[ 0.505413] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200 <7>[ 0.505433] pci 0000:06:00.0: reg 10: [io 0x2000-0x20ff] <7>[ 0.505467] pci 0000:06:00.0: reg 18: [mem 0xf1804000-0xf1804fff 64bit pref] <7>[ 0.505488] pci 0000:06:00.0: reg 20: [mem 0xf1800000-0xf1803fff 64bit pref] <7>[ 0.505541] pci 0000:06:00.0: rpm_resume flags 0x0 <7>[ 0.505542] pci 0000:06:00.0: rpm_resume returns -11 <7>[ 0.505551] pci 0000:06:00.0: supports D1 D2 <7>[ 0.505553] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold <7>[ 0.505558] pci 0000:06:00.0: PME# disabled <6>[ 0.507011] pci 0000:00:1c.5: PCI bridge to [bus 06-06] <7>[ 0.507150] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] <7>[ 0.507154] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled) <7>[ 0.507160] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff 64bit pref] <7>[ 0.507195] pci_bus 0000:00: on NUMA node 0 <7>[ 0.507197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>[ 0.507328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] <7>[ 0.507362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] <7>[ 0.507396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] <7>[ 0.507428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] <7>[ 0.507473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] <7>[ 0.507515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] <7>[ 0.507580] \_SB_.PCI0:_OSC invalid UUID <7>[ 0.507581] _OSC request data:1 1f 1f <6>[ 0.507584] pci0000:00: Requesting ACPI _OSC control (0x1d) <7>[ 0.507710] \_SB_.PCI0:_OSC invalid UUID <7>[ 0.507711] _OSC request data:1 0 1d <7>[ 0.507886] PM: Adding info for pci:0000:00:00.0 <7>[ 0.508089] PM: Adding info for pci:0000:00:01.0 <7>[ 0.508284] PM: Adding info for pci:0000:00:02.0 <7>[ 0.508477] PM: Adding info for pci:0000:00:16.0 <7>[ 0.508669] PM: Adding info for pci:0000:00:1a.0 <7>[ 0.508862] PM: Adding info for pci:0000:00:1b.0 <7>[ 0.509059] PM: Adding info for pci:0000:00:1c.0 <7>[ 0.509254] PM: Adding info for pci:0000:00:1c.1 <7>[ 0.509452] PM: Adding info for pci:0000:00:1c.3 <7>[ 0.509645] PM: Adding info for pci:0000:00:1c.4 <7>[ 0.509838] PM: Adding info for pci:0000:00:1c.5 <7>[ 0.510034] PM: Adding info for pci:0000:00:1d.0 <7>[ 0.510228] PM: Adding info for pci:0000:00:1f.0 <7>[ 0.510421] PM: Adding info for pci:0000:00:1f.2 <7>[ 0.510614] PM: Adding info for pci:0000:00:1f.3 <7>[ 0.510664] PM: Adding info for pci:0000:01:00.0 <7>[ 0.510695] PM: Adding info for No Bus:0000:01 <7>[ 0.510723] PM: Adding info for No Bus:0000:02 <7>[ 0.510765] PM: Adding info for pci:0000:03:00.0 <7>[ 0.510793] PM: Adding info for No Bus:0000:03 <7>[ 0.510835] PM: Adding info for pci:0000:04:00.0 <7>[ 0.510863] PM: Adding info for No Bus:0000:04 <7>[ 0.510892] PM: Adding info for No Bus:0000:05 <7>[ 0.510933] PM: Adding info for pci:0000:06:00.0 <7>[ 0.510963] PM: Adding info for No Bus:0000:06 <6>[ 0.511050] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) <6>[ 0.511659] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) <6>[ 0.512267] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) <6>[ 0.512871] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) <6>[ 0.513478] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. <6>[ 0.514214] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. <6>[ 0.514947] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) <6>[ 0.515557] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) <7>[ 0.516213] PM: Adding info for No Bus:vga_arbiter <6>[ 0.516236] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none <6>[ 0.516388] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none <6>[ 0.516537] vgaarb: loaded <5>[ 0.516725] SCSI subsystem initialized <7>[ 0.516871] libata version 3.00 loaded. <6>[ 0.516920] usbcore: registered new interface driver usbfs <6>[ 0.517042] usbcore: registered new interface driver hub <6>[ 0.517166] usbcore: registered new device driver usb <6>[ 0.517341] PCI: Using ACPI for IRQ routing <7>[ 0.517435] PCI: pci_cache_line_size set to 64 bytes <7>[ 0.517609] reserve RAM buffer: 000000000009d800 - 000000000009ffff <7>[ 0.517672] PM: Adding info for No Bus:lo <7>[ 0.517784] PM: Adding info for platform:regulatory.0 <6>[ 0.517806] cfg80211: Calling CRDA to update world regulatory domain <7>[ 0.518102] PM: Adding info for No Bus:rfkill <6>[ 0.518130] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 0.518580] hpet0: 8 comparators, 64-bit 14.318180 MHz counter <6>[ 0.520688] Switching to clocksource hpet <6>[ 0.520842] pnp: PnP ACPI init <7>[ 0.520942] PM: Adding info for No Bus:pnp0 <6>[ 0.520944] ACPI: bus type pnp registered <6>[ 0.520966] Switched to NOHz mode on CPU #0 <6>[ 0.521001] Switched to NOHz mode on CPU #3 <6>[ 0.521082] Switched to NOHz mode on CPU #2 <6>[ 0.521335] Switched to NOHz mode on CPU #1 <7>[ 0.521719] pnp 00:00: [bus 00-3e] <7>[ 0.521721] pnp 00:00: [io 0x0000-0x0cf7 window] <7>[ 0.521722] pnp 00:00: [io 0x0cf8-0x0cff] <7>[ 0.521724] pnp 00:00: [io 0x0d00-0xffff window] <7>[ 0.521726] pnp 00:00: [mem 0x000a0000-0x000bffff window] <7>[ 0.521727] pnp 00:00: [mem 0x000c0000-0x000c3fff window] <7>[ 0.521729] pnp 00:00: [mem 0x000c4000-0x000c7fff window] <7>[ 0.521730] pnp 00:00: [mem 0x000c8000-0x000cbfff window] <7>[ 0.521732] pnp 00:00: [mem 0x000cc000-0x000cffff window] <7>[ 0.521733] pnp 00:00: [mem 0x000d0000-0x000d3fff window] <7>[ 0.521735] pnp 00:00: [mem 0x000d4000-0x000d7fff window] <7>[ 0.521736] pnp 00:00: [mem 0x000d8000-0x000dbfff window] <7>[ 0.521738] pnp 00:00: [mem 0x000dc000-0x000dffff window] <7>[ 0.521739] pnp 00:00: [mem 0x000e0000-0x000e3fff window] <7>[ 0.521741] pnp 00:00: [mem 0x000e4000-0x000e7fff window] <7>[ 0.521742] pnp 00:00: [mem 0x000e8000-0x000ebfff window] <7>[ 0.521744] pnp 00:00: [mem 0x000ec000-0x000effff window] <7>[ 0.521746] pnp 00:00: [mem 0x000f0000-0x000fffff window] <7>[ 0.521747] pnp 00:00: [mem 0xbfa00000-0xfeafffff window] <7>[ 0.521749] pnp 00:00: [mem 0xfed40000-0xfed44fff window] <7>[ 0.521784] PM: Adding info for pnp:00:00 <7>[ 0.521816] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) <7>[ 0.521838] pnp 00:01: [io 0x0000-0x001f] <7>[ 0.521839] pnp 00:01: [io 0x0081-0x0091] <7>[ 0.521840] pnp 00:01: [io 0x0093-0x009f] <7>[ 0.521841] pnp 00:01: [io 0x00c0-0x00df] <7>[ 0.521843] pnp 00:01: [dma 4] <7>[ 0.521859] PM: Adding info for pnp:00:01 <7>[ 0.521888] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) <7>[ 0.521954] pnp 00:02: [mem 0xfed00000-0xfed003ff] <7>[ 0.521970] PM: Adding info for pnp:00:02 <7>[ 0.522000] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) <7>[ 0.522009] pnp 00:03: [io 0x00f0] <7>[ 0.522017] pnp 00:03: [irq 13] <7>[ 0.522033] PM: Adding info for pnp:00:03 <7>[ 0.522060] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) <7>[ 0.522069] pnp 00:04: [io 0x002e-0x002f] <7>[ 0.522070] pnp 00:04: [io 0x004e-0x004f] <7>[ 0.522071] pnp 00:04: [io 0x0061] <7>[ 0.522073] pnp 00:04: [io 0x0063] <7>[ 0.522074] pnp 00:04: [io 0x0065] <7>[ 0.522075] pnp 00:04: [io 0x0067] <7>[ 0.522076] pnp 00:04: [io 0x0068] <7>[ 0.522077] pnp 00:04: [io 0x006c] <7>[ 0.522078] pnp 00:04: [io 0x0070] <7>[ 0.522080] pnp 00:04: [io 0x0080] <7>[ 0.522081] pnp 00:04: [io 0x0092] <7>[ 0.522082] pnp 00:04: [io 0x00b2-0x00b3] <7>[ 0.522083] pnp 00:04: [io 0x0680-0x069f] <7>[ 0.522085] pnp 00:04: [io 0x1000-0x1003] <7>[ 0.522087] pnp 00:04: [io 0x1004-0x1013] <7>[ 0.522088] pnp 00:04: [io 0xffff] <7>[ 0.522089] pnp 00:04: [io 0x0400-0x0453] <7>[ 0.522091] pnp 00:04: [io 0x0458-0x047f] <7>[ 0.522092] pnp 00:04: [io 0x0500-0x057f] <7>[ 0.522093] pnp 00:04: [io 0x164e-0x164f] <7>[ 0.522126] PM: Adding info for pnp:00:04 <6>[ 0.522156] system 00:04: [io 0x0680-0x069f] has been reserved <6>[ 0.522254] system 00:04: [io 0x1000-0x1003] has been reserved <6>[ 0.522351] system 00:04: [io 0x1004-0x1013] has been reserved <6>[ 0.522448] system 00:04: [io 0xffff] has been reserved <6>[ 0.522544] system 00:04: [io 0x0400-0x0453] has been reserved <6>[ 0.522641] system 00:04: [io 0x0458-0x047f] has been reserved <6>[ 0.522739] system 00:04: [io 0x0500-0x057f] has been reserved <6>[ 0.522846] system 00:04: [io 0x164e-0x164f] has been reserved <7>[ 0.522943] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) <7>[ 0.522951] pnp 00:05: [io 0x0070-0x0077] <7>[ 0.522957] pnp 00:05: [irq 8] <7>[ 0.522972] PM: Adding info for pnp:00:05 <7>[ 0.523001] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) <7>[ 0.523025] pnp 00:06: [io 0x0454-0x0457] <7>[ 0.523050] PM: Adding info for pnp:00:06 <6>[ 0.523080] system 00:06: [io 0x0454-0x0457] has been reserved <7>[ 0.523178] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) <7>[ 0.523212] pnp 00:07: [io 0x0060] <7>[ 0.523213] pnp 00:07: [io 0x0064] <7>[ 0.523218] pnp 00:07: [irq 1] <7>[ 0.523235] PM: Adding info for pnp:00:07 <7>[ 0.523263] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) <7>[ 0.523293] pnp 00:08: [irq 12] <7>[ 0.523316] PM: Adding info for pnp:00:08 <7>[ 0.523344] pnp 00:08: Plug and Play ACPI device, IDs DLL04b6 PNP0f13 (active) <7>[ 0.523436] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] <7>[ 0.523438] pnp 00:09: [mem 0xfed10000-0xfed17fff] <7>[ 0.523439] pnp 00:09: [mem 0xfed18000-0xfed18fff] <7>[ 0.523441] pnp 00:09: [mem 0xfed19000-0xfed19fff] <7>[ 0.523442] pnp 00:09: [mem 0xf8000000-0xfbffffff] <7>[ 0.523444] pnp 00:09: [mem 0xfed20000-0xfed3ffff] <7>[ 0.523445] pnp 00:09: [mem 0xfed90000-0xfed93fff] <7>[ 0.523446] pnp 00:09: [mem 0xfed45000-0xfed8ffff] <7>[ 0.523448] pnp 00:09: [mem 0xff000000-0xffffffff] <7>[ 0.523449] pnp 00:09: [mem 0xfee00000-0xfeefffff] <7>[ 0.523451] pnp 00:09: [mem 0xfffff000-0xffffffff] <4>[ 0.523465] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] <7>[ 0.523637] PM: Adding info for pnp:00:09 <6>[ 0.523668] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved <6>[ 0.523765] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved <6>[ 0.523877] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved <6>[ 0.523976] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved <6>[ 0.524073] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved <6>[ 0.524171] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved <6>[ 0.524270] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved <6>[ 0.524368] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved <6>[ 0.524466] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved <6>[ 0.524565] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved <7>[ 0.524665] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) <7>[ 0.524763] pnp 00:0a: [irq 20] <7>[ 0.524792] PM: Adding info for pnp:00:0a <7>[ 0.524829] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) <6>[ 0.524952] pnp: PnP ACPI: found 11 devices <6>[ 0.525046] ACPI: ACPI bus type pnp unregistered <7>[ 0.525186] PM: Adding info for No Bus:mem <7>[ 0.525222] PM: Adding info for No Bus:kmem <7>[ 0.525258] PM: Adding info for No Bus:null <7>[ 0.525294] PM: Adding info for No Bus:port <7>[ 0.525328] PM: Adding info for No Bus:zero <7>[ 0.525365] PM: Adding info for No Bus:full <7>[ 0.525400] PM: Adding info for No Bus:random <7>[ 0.525438] PM: Adding info for No Bus:urandom <7>[ 0.525474] PM: Adding info for No Bus:kmsg <7>[ 0.525510] PM: Adding info for No Bus:oldmem <7>[ 0.525547] PM: Adding info for No Bus:tty <7>[ 0.525583] PM: Adding info for No Bus:console <7>[ 0.525620] PM: Adding info for No Bus:tty0 <7>[ 0.525683] PM: Adding info for No Bus:vcs <7>[ 0.525718] PM: Adding info for No Bus:vcsa <7>[ 0.525755] PM: Adding info for No Bus:vcs1 <7>[ 0.525790] PM: Adding info for No Bus:vcsa1 <7>[ 0.525838] PM: Adding info for No Bus:tty1 <7>[ 0.525875] PM: Adding info for No Bus:tty2 <7>[ 0.525910] PM: Adding info for No Bus:tty3 <7>[ 0.525946] PM: Adding info for No Bus:tty4 <7>[ 0.525984] PM: Adding info for No Bus:tty5 <7>[ 0.526019] PM: Adding info for No Bus:tty6 <7>[ 0.526055] PM: Adding info for No Bus:tty7 <7>[ 0.526090] PM: Adding info for No Bus:tty8 <7>[ 0.526126] PM: Adding info for No Bus:tty9 <7>[ 0.526162] PM: Adding info for No Bus:tty10 <7>[ 0.526198] PM: Adding info for No Bus:tty11 <7>[ 0.526236] PM: Adding info for No Bus:tty12 <7>[ 0.526273] PM: Adding info for No Bus:tty13 <7>[ 0.526312] PM: Adding info for No Bus:tty14 <7>[ 0.526348] PM: Adding info for No Bus:tty15 <7>[ 0.526383] PM: Adding info for No Bus:tty16 <7>[ 0.526420] PM: Adding info for No Bus:tty17 <7>[ 0.526455] PM: Adding info for No Bus:tty18 <7>[ 0.526493] PM: Adding info for No Bus:tty19 <7>[ 0.526528] PM: Adding info for No Bus:tty20 <7>[ 0.526564] PM: Adding info for No Bus:tty21 <7>[ 0.526601] PM: Adding info for No Bus:tty22 <7>[ 0.526637] PM: Adding info for No Bus:tty23 <7>[ 0.526674] PM: Adding info for No Bus:tty24 <7>[ 0.526713] PM: Adding info for No Bus:tty25 <7>[ 0.526750] PM: Adding info for No Bus:tty26 <7>[ 0.526787] PM: Adding info for No Bus:tty27 <7>[ 0.526834] PM: Adding info for No Bus:tty28 <7>[ 0.526877] PM: Adding info for No Bus:tty29 <7>[ 0.526914] PM: Adding info for No Bus:tty30 <7>[ 0.526950] PM: Adding info for No Bus:tty31 <7>[ 0.526987] PM: Adding info for No Bus:tty32 <7>[ 0.527024] PM: Adding info for No Bus:tty33 <7>[ 0.527061] PM: Adding info for No Bus:tty34 <7>[ 0.527100] PM: Adding info for No Bus:tty35 <7>[ 0.527137] PM: Adding info for No Bus:tty36 <7>[ 0.527176] PM: Adding info for No Bus:tty37 <7>[ 0.527213] PM: Adding info for No Bus:tty38 <7>[ 0.527248] PM: Adding info for No Bus:tty39 <7>[ 0.527286] PM: Adding info for No Bus:tty40 <7>[ 0.527323] PM: Adding info for No Bus:tty41 <7>[ 0.527360] PM: Adding info for No Bus:tty42 <7>[ 0.527397] PM: Adding info for No Bus:tty43 <7>[ 0.527433] PM: Adding info for No Bus:tty44 <7>[ 0.527470] PM: Adding info for No Bus:tty45 <7>[ 0.527508] PM: Adding info for No Bus:tty46 <7>[ 0.527547] PM: Adding info for No Bus:tty47 <7>[ 0.527584] PM: Adding info for No Bus:tty48 <7>[ 0.527621] PM: Adding info for No Bus:tty49 <7>[ 0.527659] PM: Adding info for No Bus:tty50 <7>[ 0.527695] PM: Adding info for No Bus:tty51 <7>[ 0.527733] PM: Adding info for No Bus:tty52 <7>[ 0.527770] PM: Adding info for No Bus:tty53 <7>[ 0.527807] PM: Adding info for No Bus:tty54 <7>[ 0.527858] PM: Adding info for No Bus:tty55 <7>[ 0.527896] PM: Adding info for No Bus:tty56 <7>[ 0.527935] PM: Adding info for No Bus:tty57 <7>[ 0.527973] PM: Adding info for No Bus:tty58 <7>[ 0.528012] PM: Adding info for No Bus:tty59 <7>[ 0.528050] PM: Adding info for No Bus:tty60 <7>[ 0.528088] PM: Adding info for No Bus:tty61 <7>[ 0.528125] PM: Adding info for No Bus:tty62 <7>[ 0.528163] PM: Adding info for No Bus:tty63 <6>[ 0.532793] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] <6>[ 0.533001] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref] <6>[ 0.533147] pci 0000:00:01.0: PCI bridge to [bus 01-01] <6>[ 0.533243] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] <6>[ 0.533341] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff] <6>[ 0.533440] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] <6>[ 0.533590] pci 0000:00:1c.0: PCI bridge to [bus 02-02] <6>[ 0.533684] pci 0000:00:1c.0: bridge window [io disabled] <6>[ 0.533785] pci 0000:00:1c.0: bridge window [mem disabled] <6>[ 0.533892] pci 0000:00:1c.0: bridge window [mem pref disabled] <6>[ 0.533996] pci 0000:00:1c.1: PCI bridge to [bus 03-03] <6>[ 0.534091] pci 0000:00:1c.1: bridge window [io disabled] <6>[ 0.534192] pci 0000:00:1c.1: bridge window [mem 0xf1b00000-0xf1bfffff] <6>[ 0.534293] pci 0000:00:1c.1: bridge window [mem pref disabled] <6>[ 0.534397] pci 0000:00:1c.3: PCI bridge to [bus 04-04] <6>[ 0.534492] pci 0000:00:1c.3: bridge window [io disabled] <6>[ 0.534592] pci 0000:00:1c.3: bridge window [mem 0xf1a00000-0xf1afffff] <6>[ 0.534694] pci 0000:00:1c.3: bridge window [mem pref disabled] <6>[ 0.534798] pci 0000:00:1c.4: PCI bridge to [bus 05-05] <6>[ 0.534898] pci 0000:00:1c.4: bridge window [io disabled] <6>[ 0.534998] pci 0000:00:1c.4: bridge window [mem 0xf1900000-0xf19fffff] <6>[ 0.535097] pci 0000:00:1c.4: bridge window [mem pref disabled] <6>[ 0.535197] pci 0000:00:1c.5: PCI bridge to [bus 06-06] <6>[ 0.535292] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] <6>[ 0.535392] pci 0000:00:1c.5: bridge window [mem disabled] <6>[ 0.535491] pci 0000:00:1c.5: bridge window [mem 0xf1800000-0xf18fffff 64bit pref] <6>[ 0.535651] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.535750] pci 0000:00:01.0: setting latency timer to 64 <6>[ 0.535757] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.535870] pci 0000:00:1c.0: setting latency timer to 64 <6>[ 0.535881] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>[ 0.535983] pci 0000:00:1c.1: setting latency timer to 64 <6>[ 0.535994] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 <7>[ 0.536095] pci 0000:00:1c.3: setting latency timer to 64 <6>[ 0.536102] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 0.536202] pci 0000:00:1c.4: setting latency timer to 64 <6>[ 0.536208] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 <7>[ 0.536308] pci 0000:00:1c.5: setting latency timer to 64 <7>[ 0.536311] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] <7>[ 0.536313] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] <7>[ 0.536315] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] <7>[ 0.536316] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff] <7>[ 0.536318] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] <7>[ 0.536320] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] <7>[ 0.536321] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff] <7>[ 0.536323] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] <7>[ 0.536325] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff] <7>[ 0.536326] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff] <7>[ 0.536328] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff] <7>[ 0.536330] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] <7>[ 0.536331] pci_bus 0000:06: resource 2 [mem 0xf1800000-0xf18fffff 64bit pref] <6>[ 0.536357] NET: Registered protocol family 2 <6>[ 0.536482] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) <6>[ 0.536693] TCP established hash table entries: 16384 (order: 6, 262144 bytes) <6>[ 0.536884] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) <6>[ 0.537011] TCP: Hash tables configured (established 16384 bind 16384) <6>[ 0.537110] TCP reno registered <6>[ 0.537202] UDP hash table entries: 256 (order: 1, 8192 bytes) <6>[ 0.537301] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) <6>[ 0.537484] NET: Registered protocol family 1 <7>[ 0.537586] pci 0000:00:02.0: Boot video device <7>[ 0.538393] PCI: CLS 64 bytes, default 64 <6>[ 0.538449] IOMMU 0 0xfed90000: using Queued invalidation <6>[ 0.538545] IOMMU 1 0xfed91000: using Queued invalidation <6>[ 0.538642] IOMMU: Setting RMRR: <6>[ 0.538743] IOMMU: Setting identity map for device 0000:00:02.0 [0xbb800000 - 0xbfa00000] <6>[ 0.539241] IOMMU: Setting identity map for device 0000:00:1d.0 [0xbae1d000 - 0xbae34000] <6>[ 0.539407] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbae1d000 - 0xbae34000] <6>[ 0.539564] IOMMU: Prepare 0-16MiB unity mapping for LPC <6>[ 0.539667] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000] <6>[ 0.541433] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O <7>[ 0.542458] PM: Adding info for No Bus:mcelog <7>[ 0.542531] PM: Adding info for No Bus:msr0 <7>[ 0.542569] PM: Adding info for No Bus:msr1 <7>[ 0.542605] PM: Adding info for No Bus:msr2 <7>[ 0.542641] PM: Adding info for No Bus:msr3 <7>[ 0.542705] PM: Adding info for No Bus:cpu0 <7>[ 0.542741] PM: Adding info for No Bus:cpu1 <7>[ 0.542778] PM: Adding info for No Bus:cpu2 <7>[ 0.542826] PM: Adding info for No Bus:cpu3 <7>[ 0.542914] PM: Adding info for platform:pcspkr <7>[ 0.542950] PM: Adding info for platform:microcode <6>[ 0.542982] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 <6>[ 0.543084] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 <6>[ 0.543185] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 <6>[ 0.543289] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 <7>[ 0.543397] PM: Adding info for No Bus:microcode <6>[ 0.543426] microcode: Microcode Update Driver: v2.00 , Peter Oruba <7>[ 0.543701] PM: Adding info for No Bus:snapshot <7>[ 0.551046] PM: Adding info for event_source:cpu <7>[ 0.551081] PM: Adding info for event_source:breakpoint <7>[ 0.551116] PM: Adding info for event_source:software <5>[ 0.554002] VFS: Disk quotas dquot_6.5.2 <4>[ 0.554157] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.554283] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled <6>[ 0.554889] SGI XFS Quota Management subsystem <6>[ 0.554988] msgmni has been set to 668 <6>[ 0.555375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) <6>[ 0.555522] io scheduler noop registered <6>[ 0.555615] io scheduler deadline registered <6>[ 0.555756] io scheduler cfq registered (default) <7>[ 0.555934] pcieport 0000:00:01.0: setting latency timer to 64 <7>[ 0.555958] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X <7>[ 0.555972] PM: Adding info for pci_express:0000:00:01.0:pcie08 <6>[ 0.556314] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <7>[ 0.556411] intel_idle: MWAIT substates: 0x21120 <7>[ 0.556412] intel_idle: v0.4 model 0x2A <7>[ 0.556413] intel_idle: lapic_timer_reliable_states 0xffffffff <7>[ 0.557610] PM: Adding info for No Bus:ptmx <7>[ 0.557668] PM: Adding info for No Bus:hpet <7>[ 0.557817] PM: Adding info for No Bus:nvram <6>[ 0.557847] Non-volatile memory driver v1.3 <7>[ 0.558027] PM: Adding info for No Bus:7:0 <7>[ 0.558073] PM: Adding info for No Bus:loop0 <7>[ 0.558121] PM: Adding info for No Bus:7:1 <7>[ 0.558158] PM: Adding info for No Bus:loop1 <7>[ 0.558204] PM: Adding info for No Bus:7:2 <7>[ 0.558239] PM: Adding info for No Bus:loop2 <7>[ 0.558284] PM: Adding info for No Bus:7:3 <7>[ 0.558320] PM: Adding info for No Bus:loop3 <7>[ 0.558366] PM: Adding info for No Bus:7:4 <7>[ 0.558402] PM: Adding info for No Bus:loop4 <7>[ 0.558447] PM: Adding info for No Bus:7:5 <7>[ 0.558485] PM: Adding info for No Bus:loop5 <7>[ 0.558530] PM: Adding info for No Bus:7:6 <7>[ 0.558566] PM: Adding info for No Bus:loop6 <7>[ 0.558612] PM: Adding info for No Bus:7:7 <7>[ 0.558648] PM: Adding info for No Bus:loop7 <6>[ 0.558685] loop: module loaded <7>[ 0.558861] ahci 0000:00:1f.2: version 3.0 <6>[ 0.558870] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 <7>[ 0.558998] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X <6>[ 0.559022] ahci: SSS flag set, parallel bus scan disabled <6>[ 0.569785] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode <6>[ 0.569967] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst <7>[ 0.570118] ahci 0000:00:1f.2: setting latency timer to 64 <7>[ 0.573819] PM: Adding info for No Bus:ata1 <7>[ 0.573851] PM: Adding info for No Bus:ata1 <7>[ 0.573901] PM: Adding info for No Bus:link1 <7>[ 0.573911] PM: Adding info for No Bus:link1 <7>[ 0.573947] PM: Adding info for No Bus:dev1.0 <7>[ 0.573957] PM: Adding info for No Bus:dev1.0 <7>[ 0.573994] PM: Adding info for No Bus:ata2 <7>[ 0.574004] PM: Adding info for No Bus:ata2 <7>[ 0.574038] PM: Adding info for No Bus:link2 <7>[ 0.574047] PM: Adding info for No Bus:link2 <7>[ 0.574084] PM: Adding info for No Bus:dev2.0 <7>[ 0.574093] PM: Adding info for No Bus:dev2.0 <7>[ 0.574130] PM: Adding info for No Bus:ata3 <7>[ 0.574139] PM: Adding info for No Bus:ata3 <7>[ 0.574173] PM: Adding info for No Bus:link3 <7>[ 0.574183] PM: Adding info for No Bus:link3 <7>[ 0.574218] PM: Adding info for No Bus:dev3.0 <7>[ 0.574227] PM: Adding info for No Bus:dev3.0 <7>[ 0.574269] PM: Adding info for No Bus:ata4 <7>[ 0.574278] PM: Adding info for No Bus:ata4 <7>[ 0.574313] PM: Adding info for No Bus:link4 <7>[ 0.574322] PM: Adding info for No Bus:link4 <7>[ 0.574357] PM: Adding info for No Bus:dev4.0 <7>[ 0.574366] PM: Adding info for No Bus:dev4.0 <7>[ 0.574402] PM: Adding info for No Bus:ata5 <7>[ 0.574412] PM: Adding info for No Bus:ata5 <7>[ 0.574446] PM: Adding info for No Bus:link5 <7>[ 0.574455] PM: Adding info for No Bus:link5 <7>[ 0.574490] PM: Adding info for No Bus:dev5.0 <7>[ 0.574499] PM: Adding info for No Bus:dev5.0 <7>[ 0.574536] PM: Adding info for No Bus:ata6 <7>[ 0.574545] PM: Adding info for No Bus:ata6 <7>[ 0.574579] PM: Adding info for No Bus:link6 <7>[ 0.574589] PM: Adding info for No Bus:link6 <7>[ 0.574624] PM: Adding info for No Bus:dev6.0 <7>[ 0.574634] PM: Adding info for No Bus:dev6.0 <6>[ 0.574679] scsi0 : ahci <7>[ 0.574803] PM: Adding info for scsi:host0 <7>[ 0.574845] PM: Adding info for No Bus:host0 <6>[ 0.574891] scsi1 : ahci <7>[ 0.574990] PM: Adding info for scsi:host1 <7>[ 0.575030] PM: Adding info for No Bus:host1 <6>[ 0.575076] scsi2 : ahci <7>[ 0.575174] PM: Adding info for scsi:host2 <7>[ 0.575214] PM: Adding info for No Bus:host2 <6>[ 0.575259] scsi3 : ahci <7>[ 0.575358] PM: Adding info for scsi:host3 <7>[ 0.575397] PM: Adding info for No Bus:host3 <6>[ 0.575442] scsi4 : ahci <7>[ 0.575542] PM: Adding info for scsi:host4 <7>[ 0.575582] PM: Adding info for No Bus:host4 <6>[ 0.575626] scsi5 : ahci <7>[ 0.575737] PM: Adding info for scsi:host5 <7>[ 0.575778] PM: Adding info for No Bus:host5 <6>[ 0.575849] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 43 <6>[ 0.575996] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 43 <6>[ 0.576143] ata3: DUMMY <6>[ 0.576233] ata4: DUMMY <6>[ 0.576325] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08300 irq 43 <6>[ 0.576471] ata6: DUMMY <7>[ 0.576572] scsi host0: rpm_resume flags 0x4 <7>[ 0.576574] scsi host0: rpm_resume returns 1 <5>[ 0.576707] usbmon: debugfs is not available <6>[ 0.576815] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <7>[ 0.576913] ohci_hcd: block sizes: ed 80 td 96 <6>[ 0.576978] usbcore: registered new interface driver libusual <6>[ 0.577155] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <7>[ 0.577322] PM: Adding info for platform:i8042 <6>[ 0.581696] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 0.581805] serio: i8042 AUX port at 0x60,0x64 irq 12 <7>[ 0.581912] PM: Adding info for serio:serio0 <7>[ 0.581956] PM: Adding info for serio:serio1 <7>[ 0.581984] PM: Adding info for No Bus:mice <6>[ 0.582018] mousedev: PS/2 mouse device common for all mice <6>[ 0.582161] rtc_cmos 00:05: RTC can wake from S4 <7>[ 0.588626] PM: Adding info for No Bus:input0 <6>[ 0.588715] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <7>[ 0.589796] PM: Adding info for No Bus:rtc0 <6>[ 0.589856] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 <6>[ 0.589977] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs <6>[ 0.590658] cpuidle: using governor ladder <6>[ 0.591857] cpuidle: using governor menu <6>[ 0.592492] usbcore: registered new interface driver usbhid <6>[ 0.592587] usbhid: USB HID core driver <6>[ 0.592723] Netfilter messages via NETLINK v0.30. <6>[ 0.592827] nf_conntrack version 0.5.0 (2675 buckets, 10700 max) <6>[ 0.593055] ctnetlink v0.93: registering with nfnetlink. <6>[ 0.593367] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 0.593495] TCP cubic registered <6>[ 0.593597] Initializing XFRM netlink socket <6>[ 0.594028] NET: Registered protocol family 10 <6>[ 0.594608] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 0.594756] IPv6 over IPv4 tunneling driver <7>[ 0.594891] PM: Adding info for No Bus:sit0 <6>[ 0.595286] NET: Registered protocol family 17 <5>[ 0.595383] Registering the dns_resolver key type <7>[ 0.595504] PM: Adding info for No Bus:cpu_dma_latency <7>[ 0.595547] PM: Adding info for No Bus:network_latency <7>[ 0.595590] PM: Adding info for No Bus:network_throughput <7>[ 0.595623] PM: Hibernation image not present or could not be loaded. <4>[ 0.595627] registered taskstats version 1 <4>[ 0.596038] Magic number: 11:620:740 <6>[ 0.880245] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>[ 0.882300] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) <6>[ 0.882868] ata1.00: ATA-8: ST9500420AS, D005SDM1, max UDMA/133 <6>[ 0.883001] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) <6>[ 0.885439] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) <6>[ 0.886005] ata1.00: configured for UDMA/133 <7>[ 0.887209] scsi host0: rpm_suspend flags 0x0 <7>[ 0.887221] scsi host0: rpm_suspend returns 0 <7>[ 0.887231] scsi target0:0:0: rpm_resume flags 0x4 <7>[ 0.887240] scsi target0:0:0: rpm_resume returns -11 <7>[ 0.887247] scsi host0: rpm_resume flags 0x4 <7>[ 0.887254] ahci 0000:00:1f.2: rpm_resume flags 0x0 <7>[ 0.887258] ahci 0000:00:1f.2: rpm_resume returns 1 <7>[ 0.887264] scsi host0: rpm_resume returns 0 <5>[ 0.887364] scsi 0:0:0:0: Direct-Access ATA ST9500420AS D005 PQ: 0 ANSI: 5 <7>[ 0.887528] PM: Adding info for scsi:target0:0:0 <7>[ 0.887651] scsi target0:0:0: rpm_resume flags 0x4 <7>[ 0.887653] scsi target0:0:0: rpm_resume returns 1 <7>[ 0.887655] scsi 0:0:0:0: rpm_resume flags 0x0 <7>[ 0.887657] scsi 0:0:0:0: rpm_resume returns -11 <7>[ 0.887658] scsi 0:0:0:0: rpm_resume flags 0x4 <7>[ 0.887659] scsi 0:0:0:0: rpm_resume returns 1 <7>[ 0.887677] PM: Adding info for scsi:0:0:0:0 <7>[ 0.887747] PM: Adding info for No Bus:0:0:0:0 <7>[ 0.887794] PM: Adding info for No Bus:0:0:0:0 <5>[ 0.887822] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) <7>[ 0.887886] PM: Adding info for No Bus:0:0:0:0 <7>[ 0.887943] scsi host1: rpm_resume flags 0x4 <7>[ 0.887944] scsi host1: rpm_resume returns 1 <5>[ 0.888034] sd 0:0:0:0: [sda] Write Protect is off <7>[ 0.888130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 0.888161] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <7>[ 0.888328] PM: Adding info for No Bus:8:0 <7>[ 0.888422] PM: Adding info for No Bus:sda <7>[ 0.888437] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 0.888438] sd 0:0:0:0: rpm_resume returns 1 <6>[ 0.934041] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > <7>[ 0.934192] PM: Adding info for No Bus:sda1 <7>[ 0.934210] PM: Adding info for No Bus:sda2 <7>[ 0.934232] PM: Adding info for No Bus:sda3 <7>[ 0.934248] PM: Adding info for No Bus:sda4 <7>[ 0.934263] PM: Adding info for No Bus:sda5 <7>[ 0.934278] PM: Adding info for No Bus:sda6 <5>[ 0.934810] sd 0:0:0:0: [sda] Attached SCSI disk <6>[ 1.191661] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>[ 1.193652] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7717H, 102A, max UDMA/100 <6>[ 1.195999] ata2.00: configured for UDMA/100 <7>[ 1.196690] scsi host1: rpm_suspend flags 0x0 <7>[ 1.196699] scsi host1: rpm_suspend returns 0 <7>[ 1.196783] scsi target1:0:0: rpm_resume flags 0x4 <7>[ 1.196786] scsi target1:0:0: rpm_resume returns -11 <7>[ 1.196788] scsi host1: rpm_resume flags 0x4 <7>[ 1.196789] ahci 0000:00:1f.2: rpm_resume flags 0x0 <7>[ 1.196791] ahci 0000:00:1f.2: rpm_resume returns 1 <7>[ 1.196793] scsi host1: rpm_resume returns 0 <5>[ 1.198434] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7717H 102A PQ: 0 ANSI: 5 <7>[ 1.198634] PM: Adding info for scsi:target1:0:0 <7>[ 1.198729] scsi target1:0:0: rpm_resume flags 0x4 <7>[ 1.198730] scsi target1:0:0: rpm_resume returns 1 <7>[ 1.198732] scsi 1:0:0:0: rpm_resume flags 0x0 <7>[ 1.198733] scsi 1:0:0:0: rpm_resume returns -11 <7>[ 1.198735] scsi 1:0:0:0: rpm_resume flags 0x4 <7>[ 1.198736] scsi 1:0:0:0: rpm_resume returns 1 <7>[ 1.198751] PM: Adding info for scsi:1:0:0:0 <7>[ 1.198830] PM: Adding info for No Bus:1:0:0:0 <7>[ 1.198913] PM: Adding info for No Bus:1:0:0:0 <7>[ 1.198995] scsi host2: rpm_resume flags 0x4 <7>[ 1.198997] scsi host2: rpm_resume returns 1 <7>[ 1.199001] scsi host2: rpm_suspend flags 0x0 <7>[ 1.199003] scsi host2: rpm_suspend returns 0 <7>[ 1.199029] scsi host3: rpm_resume flags 0x4 <7>[ 1.199031] scsi host3: rpm_resume returns 1 <7>[ 1.199037] scsi host3: rpm_suspend flags 0x0 <7>[ 1.199039] scsi host3: rpm_suspend returns 0 <7>[ 1.199053] scsi host4: rpm_resume flags 0x4 <7>[ 1.199055] scsi host4: rpm_resume returns 1 <6>[ 1.503072] ata5: SATA link down (SStatus 0 SControl 300) <7>[ 1.503208] scsi host4: rpm_suspend flags 0x0 <7>[ 1.503210] scsi host4: rpm_suspend returns 0 <7>[ 1.503288] scsi host5: rpm_resume flags 0x4 <7>[ 1.503291] scsi host5: rpm_resume returns 1 <7>[ 1.503297] scsi host5: rpm_suspend flags 0x0 <7>[ 1.503299] scsi host5: rpm_suspend returns 0 <7>[ 1.503354] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 1.503357] sd 0:0:0:0: rpm_resume returns 1 <6>[ 1.540998] Refined TSC clocksource calibration: 2594.106 MHz. <6>[ 1.541124] Switching to clocksource tsc <5>[ 1.558966] XFS mounting filesystem sda6 <7>[ 1.655034] Ending clean XFS mount for filesystem: sda6 <4>[ 1.655148] VFS: Mounted root (xfs filesystem) readonly on device 8:6. <6>[ 1.656115] Freeing unused kernel memory: 428k freed <6>[ 1.656277] Write protecting the kernel read-only data: 6144k <6>[ 1.658176] Freeing unused kernel memory: 580k freed <6>[ 1.660869] Freeing unused kernel memory: 864k freed <4>[ 3.911032] <30>udevd[3937]: starting version 168 <7>[ 4.233458] PM: Adding info for No Bus:BAT0 <4>[ 4.240605] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared <6>[ 4.240613] ACPI: Battery Slot [BAT0] (battery present) <7>[ 4.240666] PM: Adding info for No Bus:input1 <6>[ 4.240691] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 <6>[ 4.240696] ACPI: Power Button [PWRB] <7>[ 4.240732] PM: Adding info for No Bus:input2 <6>[ 4.240753] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 <6>[ 4.240757] ACPI: Sleep Button [SLPB] <7>[ 4.240793] PM: Adding info for No Bus:input3 <6>[ 4.240813] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 <6>[ 4.251863] ACPI: Lid Switch [LID0] <7>[ 4.251967] PM: Adding info for No Bus:input4 <6>[ 4.251989] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 <6>[ 4.251994] ACPI: Power Button [PWRF] <4>[ 4.351713] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared <7>[ 4.351769] PM: Adding info for No Bus:ADP0 <6>[ 4.451560] ACPI: AC Adapter [ADP0] (on-line) <6>[ 4.536700] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 <7>[ 4.536720] xhci_hcd 0000:04:00.0: setting latency timer to 64 <6>[ 4.536724] xhci_hcd 0000:04:00.0: xHCI Host Controller <7>[ 4.536739] drivers/usb/core/inode.c: creating file 'devices' <7>[ 4.536743] drivers/usb/core/inode.c: creating file '001' <6>[ 4.536746] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 <7>[ 4.541484] xhci_hcd 0000:04:00.0: supports USB remote wakeup <6>[ 4.541500] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf1a00000 <7>[ 4.541562] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X <7>[ 4.541567] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X <7>[ 4.541571] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X <7>[ 4.541576] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X <7>[ 4.541580] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X <4>[ 4.544869] usb usb1: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values <7>[ 4.544873] usb usb1: default language 0x0409 <7>[ 4.544878] usb usb1: udev 1, busnum 1, minor = 0 <6>[ 4.544880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0003 <6>[ 4.544882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.544883] usb usb1: Product: xHCI Host Controller <6>[ 4.544885] usb usb1: Manufacturer: Linux 2.6.38.6-dbg xhci_hcd <6>[ 4.544893] usb usb1: SerialNumber: 0000:04:00.0 <7>[ 4.544927] PM: Adding info for usb:usb1 <7>[ 4.544943] usb usb1: usb_probe_device <7>[ 4.544945] usb usb1: configuration #1 chosen from 1 choice <7>[ 4.544948] xHCI xhci_add_endpoint called for root hub <7>[ 4.544949] xHCI xhci_check_bandwidth called for root hub <7>[ 4.544953] usb usb1: adding 1-0:1.0 (config #1, interface 0) <7>[ 4.544964] PM: Adding info for usb:1-0:1.0 <7>[ 4.544976] hub 1-0:1.0: usb_probe_interface <7>[ 4.544977] hub 1-0:1.0: usb_probe_interface - got id <6>[ 4.544979] hub 1-0:1.0: USB hub found <6>[ 4.544982] hub 1-0:1.0: 4 ports detected <7>[ 4.544983] hub 1-0:1.0: standalone hub <7>[ 4.544984] hub 1-0:1.0: individual port power switching <7>[ 4.544985] hub 1-0:1.0: individual port over-current protection <7>[ 4.544987] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 4.544989] hub 1-0:1.0: power on to power good time: 20ms <7>[ 4.544992] hub 1-0:1.0: local power source is good <7>[ 4.544993] hub 1-0:1.0: enabling power on all ports <7>[ 4.545023] hub 1-0:1.0: rpm_suspend flags 0x4 <7>[ 4.545025] hub 1-0:1.0: rpm_suspend returns 0 <7>[ 4.545038] PM: Adding info for No Bus:ep_81 <7>[ 4.545040] drivers/usb/core/inode.c: creating file '001' <7>[ 4.545053] PM: Adding info for No Bus:ep_00 <7>[ 4.545055] usb usb1: rpm_suspend flags 0xc <7>[ 4.545057] usb usb1: rpm_suspend returns -38 <6>[ 4.575527] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 <4>[ 4.575532] ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf] <6>[ 4.575534] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver <7>[ 4.581055] PM: Adding info for No Bus:event0 <7>[ 4.581090] PM: Adding info for No Bus:event1 <7>[ 4.581204] PM: Adding info for No Bus:event2 <7>[ 4.581236] PM: Adding info for No Bus:event3 <7>[ 4.581263] PM: Adding info for No Bus:event4 <7>[ 4.644224] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 <7>[ 4.685419] PM: Adding info for No Bus:thermal_zone0 <6>[ 4.685482] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 4.685485] ACPI: Thermal Zone [TZ00] (65 C) <7>[ 4.685639] PM: Adding info for No Bus:thermal_zone1 <6>[ 4.685701] thermal LNXTHERM:01: registered as thermal_zone1 <6>[ 4.685703] ACPI: Thermal Zone [TZ01] (65 C) <7>[ 4.687407] ACPI: acpi_idle yielding to intel_idle <7>[ 4.687755] PM: Adding info for No Bus:cooling_device0 <7>[ 4.691165] PM: Adding info for No Bus:cooling_device1 <7>[ 4.693210] PM: Adding info for No Bus:cooling_device2 <7>[ 4.693673] PM: Adding info for No Bus:cooling_device3 <6>[ 4.803073] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded <6>[ 4.803095] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <7>[ 4.803135] r8169 0000:06:00.0: setting latency timer to 64 <5>[ 4.803141] r8169 0000:06:00.0: (unregistered net_device): unknown MAC, using family default <7>[ 4.803204] r8169 0000:06:00.0: irq 49 for MSI/MSI-X <7>[ 4.803261] PM: Adding info for No Bus:eth0 <6>[ 4.803579] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xffffc9000003c000, 14:fe:b5:ac:11:58, XID 0c200000 IRQ 49 <7>[ 4.870333] PM: Adding info for No Bus:8D9DDCBC-A997-11DA-B012-B622A1EF5492 <7>[ 4.870365] PM: Adding info for No Bus:A80593CE-A997-11DA-B012-B622A1EF5492 <7>[ 4.870395] PM: Adding info for No Bus:DD8C7670-1CB5-11DB-A98B-669A0C200008 <7>[ 4.870421] PM: Adding info for No Bus:9DBB5994-A997-11DA-B012-B622A1EF5492 <7>[ 4.870439] PM: Adding info for No Bus:A3776CE0-1E88-11DB-A98B-0800200C9A66 <7>[ 4.870459] PM: Adding info for No Bus:05901221-D566-11D1-B2F0-00A0C9062910 <6>[ 4.870497] wmi: Mapper loaded <7>[ 5.038063] PM: Adding info for No Bus:input5 <6>[ 5.038088] input: Dell WMI hotkeys as /devices/virtual/input/input5 <7>[ 5.038110] PM: Adding info for No Bus:event5 <7>[ 5.113716] PM: Adding info for No Bus:timer <6>[ 5.200001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <4>[ 5.200004] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after <7>[ 5.200006] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 <6>[ 5.200032] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>[ 5.200049] ehci_hcd 0000:00:1a.0: setting latency timer to 64 <6>[ 5.200053] ehci_hcd 0000:00:1a.0: EHCI Host Controller <7>[ 5.200059] drivers/usb/core/inode.c: creating file '002' <6>[ 5.200065] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 <7>[ 5.204044] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 <7>[ 5.204056] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr <7>[ 5.204161] ehci_hcd 0000:00:1a.0: support lpm <6>[ 5.204171] ehci_hcd 0000:00:1a.0: debug port 2 <7>[ 5.204176] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 5.208054] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported <7>[ 5.208056] ehci_hcd 0000:00:1a.0: supports USB remote wakeup <6>[ 5.208072] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1c0a000 <7>[ 5.208077] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 5.211069] PM: Adding info for No Bus:sg0 <5>[ 5.211082] sd 0:0:0:0: Attached scsi generic sg0 type 0 <7>[ 5.211104] PM: Adding info for No Bus:sg1 <5>[ 5.211116] scsi 1:0:0:0: Attached scsi generic sg1 type 5 <7>[ 5.211951] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN <6>[ 5.217019] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 <7>[ 5.217069] usb usb2: default language 0x0409 <7>[ 5.217085] usb usb2: udev 1, busnum 2, minor = 128 <6>[ 5.217090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 5.217096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.217101] usb usb2: Product: EHCI Host Controller <6>[ 5.217106] usb usb2: Manufacturer: Linux 2.6.38.6-dbg ehci_hcd <6>[ 5.217110] usb usb2: SerialNumber: 0000:00:1a.0 <7>[ 5.217161] PM: Adding info for usb:usb2 <7>[ 5.217179] usb usb2: usb_probe_device <7>[ 5.217183] usb usb2: configuration #1 chosen from 1 choice <7>[ 5.217191] usb usb2: adding 2-0:1.0 (config #1, interface 0) <7>[ 5.217206] PM: Adding info for usb:2-0:1.0 <7>[ 5.217224] hub 2-0:1.0: usb_probe_interface <7>[ 5.217226] hub 2-0:1.0: usb_probe_interface - got id <6>[ 5.217229] hub 2-0:1.0: USB hub found <6>[ 5.217234] hub 2-0:1.0: 2 ports detected <7>[ 5.217236] hub 2-0:1.0: standalone hub <7>[ 5.217237] hub 2-0:1.0: no power switching (usb 1.0) <7>[ 5.217239] hub 2-0:1.0: individual port over-current protection <7>[ 5.217242] hub 2-0:1.0: power on to power good time: 20ms <7>[ 5.217246] hub 2-0:1.0: local power source is good <7>[ 5.217248] hub 2-0:1.0: trying to enable port power on non-switchable hub <7>[ 5.217257] hub 2-0:1.0: rpm_suspend flags 0x4 <7>[ 5.217259] hub 2-0:1.0: rpm_suspend returns 0 <7>[ 5.217272] PM: Adding info for No Bus:ep_81 <7>[ 5.217274] drivers/usb/core/inode.c: creating file '001' <7>[ 5.217293] PM: Adding info for No Bus:ep_00 <7>[ 5.217295] usb usb2: rpm_suspend flags 0xc <7>[ 5.217297] usb usb2: rpm_suspend returns -38 <6>[ 5.217335] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 <7>[ 5.217355] ehci_hcd 0000:00:1d.0: setting latency timer to 64 <6>[ 5.217358] ehci_hcd 0000:00:1d.0: EHCI Host Controller <7>[ 5.217363] drivers/usb/core/inode.c: creating file '003' <6>[ 5.217366] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 <7>[ 5.223995] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 <7>[ 5.223999] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr <7>[ 5.224032] ehci_hcd 0000:00:1d.0: support lpm <6>[ 5.224043] ehci_hcd 0000:00:1d.0: debug port 2 <7>[ 5.224047] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 5.227914] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported <7>[ 5.227916] ehci_hcd 0000:00:1d.0: supports USB remote wakeup <6>[ 5.227936] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1c09000 <7>[ 5.227941] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT <7>[ 5.231810] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN <6>[ 5.236980] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 <7>[ 5.237017] usb usb3: default language 0x0409 <7>[ 5.237032] usb usb3: udev 1, busnum 3, minor = 256 <6>[ 5.237037] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 5.237043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.237049] usb usb3: Product: EHCI Host Controller <6>[ 5.237053] usb usb3: Manufacturer: Linux 2.6.38.6-dbg ehci_hcd <6>[ 5.237057] usb usb3: SerialNumber: 0000:00:1d.0 <7>[ 5.237114] PM: Adding info for usb:usb3 <7>[ 5.237133] usb usb3: usb_probe_device <7>[ 5.237136] usb usb3: configuration #1 chosen from 1 choice <7>[ 5.237144] usb usb3: adding 3-0:1.0 (config #1, interface 0) <7>[ 5.237157] PM: Adding info for usb:3-0:1.0 <7>[ 5.237175] hub 3-0:1.0: usb_probe_interface <7>[ 5.237177] hub 3-0:1.0: usb_probe_interface - got id <6>[ 5.237179] hub 3-0:1.0: USB hub found <6>[ 5.237184] hub 3-0:1.0: 2 ports detected <7>[ 5.237186] hub 3-0:1.0: standalone hub <7>[ 5.237188] hub 3-0:1.0: no power switching (usb 1.0) <7>[ 5.237190] hub 3-0:1.0: individual port over-current protection <7>[ 5.237192] hub 3-0:1.0: power on to power good time: 20ms <7>[ 5.237196] hub 3-0:1.0: local power source is good <7>[ 5.237198] hub 3-0:1.0: trying to enable port power on non-switchable hub <7>[ 5.237207] hub 3-0:1.0: rpm_suspend flags 0x4 <7>[ 5.237209] hub 3-0:1.0: rpm_suspend returns 0 <7>[ 5.237223] PM: Adding info for No Bus:ep_81 <7>[ 5.237225] drivers/usb/core/inode.c: creating file '001' <7>[ 5.237239] PM: Adding info for No Bus:ep_00 <7>[ 5.237241] usb usb3: rpm_suspend flags 0xc <7>[ 5.237242] usb usb3: rpm_suspend returns -38 <7>[ 5.282160] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.282163] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.312074] scsi host1: rpm_resume flags 0x4 <7>[ 5.312082] scsi host1: rpm_resume returns 1 <4>[ 5.314069] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray <6>[ 5.314076] cdrom: Uniform CD-ROM driver Revision: 3.20 <7>[ 5.314129] PM: Adding info for No Bus:11:0 <7>[ 5.314194] PM: Adding info for No Bus:sr0 <7>[ 5.314242] sr 1:0:0:0: Attached scsi CD-ROM sr0 <7>[ 5.316827] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 5.316832] hub 2-0:1.0: port 1: status 0501 change 0001 <7>[ 5.336813] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 5.336826] hub 3-0:1.0: port 1: status 0501 change 0001 <7>[ 5.378724] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.378727] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.378791] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.378793] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.380133] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.380136] sd 0:0:0:0: rpm_resume returns 1 <6>[ 5.383951] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 <7>[ 5.384007] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X <7>[ 5.384033] HDA Intel 0000:00:1b.0: setting latency timer to 64 <7>[ 5.417656] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 <7>[ 5.417678] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s <7>[ 5.468743] ehci_hcd 0000:00:1a.0: port 1 high speed <7>[ 5.468748] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 5.519484] usb 2-1: new high speed USB device using ehci_hcd and address 2 <7>[ 5.529202] scsi host1: rpm_resume flags 0x4 <7>[ 5.529210] scsi host1: rpm_resume returns 1 <7>[ 5.530747] scsi host1: rpm_resume flags 0x4 <7>[ 5.530752] scsi host1: rpm_resume returns 1 <7>[ 5.532297] scsi host1: rpm_resume flags 0x4 <7>[ 5.532302] scsi host1: rpm_resume returns 1 <7>[ 5.545118] scsi host1: rpm_resume flags 0x4 <7>[ 5.545125] scsi host1: rpm_resume returns 1 <7>[ 5.554042] scsi host1: rpm_resume flags 0x4 <7>[ 5.554044] scsi host1: rpm_resume returns 1 <7>[ 5.555445] scsi host1: rpm_resume flags 0x4 <7>[ 5.555450] scsi host1: rpm_resume returns 1 <7>[ 5.569032] scsi host1: rpm_resume flags 0x4 <7>[ 5.569039] scsi host1: rpm_resume returns 1 <7>[ 5.570551] ehci_hcd 0000:00:1a.0: port 1 high speed <7>[ 5.570555] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 5.633329] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 <7>[ 5.633340] ehci_hcd 0000:00:1a.0: LPM: no device attached <7>[ 5.633574] usb 2-1: udev 2, busnum 2, minor = 129 <6>[ 5.633581] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 <6>[ 5.633587] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 5.633671] PM: Adding info for usb:2-1 <7>[ 5.633691] usb 2-1: usb_probe_device <7>[ 5.633695] usb 2-1: configuration #1 chosen from 1 choice <7>[ 5.633817] usb 2-1: adding 2-1:1.0 (config #1, interface 0) <7>[ 5.633836] PM: Adding info for usb:2-1:1.0 <7>[ 5.633856] hub 2-1:1.0: usb_probe_interface <7>[ 5.633859] hub 2-1:1.0: usb_probe_interface - got id <6>[ 5.633861] hub 2-1:1.0: USB hub found <6>[ 5.633939] hub 2-1:1.0: 6 ports detected <7>[ 5.633941] hub 2-1:1.0: standalone hub <7>[ 5.633943] hub 2-1:1.0: individual port power switching <7>[ 5.633944] hub 2-1:1.0: individual port over-current protection <7>[ 5.633946] hub 2-1:1.0: Single TT <7>[ 5.633948] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 5.633950] hub 2-1:1.0: power on to power good time: 100ms <7>[ 5.634190] hub 2-1:1.0: local power source is good <7>[ 5.634193] hub 2-1:1.0: enabling power on all ports <7>[ 5.634938] hub 2-1:1.0: rpm_suspend flags 0x4 <7>[ 5.634942] hub 2-1:1.0: rpm_suspend returns 0 <7>[ 5.634965] PM: Adding info for No Bus:ep_81 <7>[ 5.634968] drivers/usb/core/inode.c: creating file '002' <7>[ 5.634992] PM: Adding info for No Bus:ep_00 <7>[ 5.634995] usb 2-1: rpm_suspend flags 0xc <7>[ 5.634998] usb 2-1: rpm_suspend returns -38 <7>[ 5.635001] hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000 <7>[ 5.635009] hub 3-0:1.0: port 1, status 0501, change 0000, 480 Mb/s <7>[ 5.685339] ehci_hcd 0000:00:1d.0: port 1 high speed <7>[ 5.685347] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 5.693339] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: <6>[ 5.693342] iwlagn: Copyright(c) 2003-2010 Intel Corporation <6>[ 5.693429] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <7>[ 5.693468] iwlagn 0000:03:00.0: setting latency timer to 64 <6>[ 5.693543] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0 <6>[ 5.710898] iwlagn 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 <6>[ 5.710899] iwlagn 0000:03:00.0: Device SKU: 0X9 <6>[ 5.710901] iwlagn 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 <6>[ 5.710919] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels <7>[ 5.711220] iwlagn 0000:03:00.0: irq 51 for MSI/MSI-X <7>[ 5.711549] PM: Adding info for No Bus:0000:03:00.0 <6>[ 5.725337] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400 <7>[ 5.734509] hub 2-1:1.0: port 4: status 0101 change 0001 <6>[ 5.736046] usb 3-1: new high speed USB device using ehci_hcd and address 2 <7>[ 5.765425] PM: Removing info for No Bus:0000:03:00.0 <6>[ 5.765456] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.2 build 35905 <7>[ 5.766002] PM: Adding info for No Bus:phy0 <7>[ 5.766033] PM: Adding info for No Bus:rfkill0 <7>[ 5.767410] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' <7>[ 5.767465] PM: Adding info for No Bus:wlan0 <7>[ 5.771509] PM: Adding info for No Bus:input6 <6>[ 5.771534] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 <7>[ 5.771563] PM: Adding info for No Bus:mouse0 <7>[ 5.771596] PM: Adding info for No Bus:event6 <7>[ 5.782199] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.782202] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.787266] ehci_hcd 0000:00:1d.0: port 1 high speed <7>[ 5.787271] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 5.822633] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.822636] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.827635] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.827638] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.827925] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.827928] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.827946] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.827949] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.828168] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.828170] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.828174] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.828176] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.833873] usb 2-1: link qh256-0001/ffff880013679e00 start 1 [1/0 us] <7>[ 5.849922] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 <7>[ 5.849931] ehci_hcd 0000:00:1d.0: LPM: no device attached <7>[ 5.850167] usb 3-1: udev 2, busnum 3, minor = 257 <6>[ 5.850173] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 <6>[ 5.850179] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 5.850281] PM: Adding info for usb:3-1 <7>[ 5.850301] usb 3-1: usb_probe_device <7>[ 5.850305] usb 3-1: configuration #1 chosen from 1 choice <7>[ 5.850409] usb 3-1: adding 3-1:1.0 (config #1, interface 0) <7>[ 5.850428] PM: Adding info for usb:3-1:1.0 <7>[ 5.850450] hub 3-1:1.0: usb_probe_interface <7>[ 5.850453] hub 3-1:1.0: usb_probe_interface - got id <6>[ 5.850455] hub 3-1:1.0: USB hub found <6>[ 5.850531] hub 3-1:1.0: 8 ports detected <7>[ 5.850533] hub 3-1:1.0: standalone hub <7>[ 5.850535] hub 3-1:1.0: individual port power switching <7>[ 5.850537] hub 3-1:1.0: individual port over-current protection <7>[ 5.850539] hub 3-1:1.0: Single TT <7>[ 5.850541] hub 3-1:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 5.850543] hub 3-1:1.0: power on to power good time: 100ms <7>[ 5.850781] hub 3-1:1.0: local power source is good <7>[ 5.850784] hub 3-1:1.0: enabling power on all ports <7>[ 5.851788] hub 3-1:1.0: rpm_suspend flags 0x4 <7>[ 5.851796] hub 3-1:1.0: rpm_suspend returns 0 <7>[ 5.851872] PM: Adding info for No Bus:ep_81 <7>[ 5.851879] drivers/usb/core/inode.c: creating file '002' <7>[ 5.851912] PM: Adding info for No Bus:ep_00 <7>[ 5.851914] usb 3-1: rpm_suspend flags 0xc <7>[ 5.851916] usb 3-1: rpm_suspend returns -38 <7>[ 5.851918] hub 2-1:1.0: state 7 ports 6 chg 0010 evt 0000 <7>[ 5.852046] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s <7>[ 5.861527] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.861529] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.862845] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 5.862848] sd 0:0:0:0: rpm_resume returns 1 <7>[ 5.862884] hub 2-1:1.0: port 4 not reset yet, waiting 10ms <6>[ 5.924790] usb 2-1.4: new high speed USB device using ehci_hcd and address 3 <7>[ 5.935755] hub 2-1:1.0: port 4 not reset yet, waiting 10ms <7>[ 5.951349] hub 3-1:1.0: port 6: status 0101 change 0001 <6>[ 5.964624] hda_codec: ALC665: SKU not ready 0x598301f0 <6>[ 5.964796] hda_codec: ALC665: BIOS auto-probing. <7>[ 6.010747] usb 2-1.4: skipped 2 descriptors after configuration <7>[ 6.010755] usb 2-1.4: skipped 7 descriptors after interface <7>[ 6.010762] usb 2-1.4: skipped 1 descriptor after endpoint <7>[ 6.010768] usb 2-1.4: skipped 28 descriptors after interface <7>[ 6.010776] usb 2-1.4: skipped 2 descriptors after interface <7>[ 6.010986] usb 2-1.4: default language 0x0409 <7>[ 6.011237] usb 2-1.4: udev 3, busnum 2, minor = 130 <6>[ 6.011243] usb 2-1.4: New USB device found, idVendor=0408, idProduct=2fb1 <6>[ 6.011249] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 <6>[ 6.011254] usb 2-1.4: Product: Laptop_Integrated_Webcam_2HDM <6>[ 6.011259] usb 2-1.4: Manufacturer: CN07CN2C7866414I0D37A00 <7>[ 6.011354] PM: Adding info for usb:2-1.4 <7>[ 6.011374] usb 2-1.4: usb_probe_device <7>[ 6.011377] usb 2-1.4: configuration #1 chosen from 1 choice <7>[ 6.011614] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0) <7>[ 6.011647] PM: Adding info for usb:2-1.4:1.0 <7>[ 6.011962] PM: Adding info for No Bus:ep_81 <7>[ 6.011977] usb 2-1.4: adding 2-1.4:1.1 (config #1, interface 1) <7>[ 6.011992] PM: Adding info for usb:2-1.4:1.1 <7>[ 6.012008] usb 2-1.4: adding 2-1.4:1.2 (config #1, interface 2) <7>[ 6.012026] PM: Adding info for usb:2-1.4:1.2 <7>[ 6.012042] drivers/usb/core/inode.c: creating file '003' <7>[ 6.012065] PM: Adding info for No Bus:ep_00 <7>[ 6.012067] usb 2-1.4: rpm_suspend flags 0xc <7>[ 6.012069] usb 2-1.4: rpm_suspend returns -38 <7>[ 6.012071] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0010 <7>[ 6.051459] usb 3-1: link qh256-0001/ffff880013e2bd80 start 1 [1/0 us] <7>[ 6.051489] hub 3-1:1.0: state 7 ports 8 chg 0040 evt 0000 <7>[ 6.051696] hub 3-1:1.0: port 6, status 0101, change 0000, 12 Mb/s <7>[ 6.062519] hub 3-1:1.0: port 6 not reset yet, waiting 10ms <6>[ 6.124419] usb 3-1.6: new high speed USB device using ehci_hcd and address 3 <7>[ 6.136366] hub 3-1:1.0: port 6 not reset yet, waiting 10ms <7>[ 6.200531] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.200533] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.202007] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.202009] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.211496] usb 3-1.6: skipped 3 descriptors after interface <7>[ 6.211504] usb 3-1.6: skipped 4 descriptors after interface <7>[ 6.211512] usb 3-1.6: skipped 4 descriptors after interface <7>[ 6.211518] usb 3-1.6: skipped 2 descriptors after interface <7>[ 6.211524] usb 3-1.6: skipped 5 descriptors after interface <7>[ 6.211533] usb 3-1.6: skipped 2 descriptors after interface <7>[ 6.211539] usb 3-1.6: skipped 4 descriptors after interface <7>[ 6.212362] usb 3-1.6: skipped 3 descriptors after interface <7>[ 6.212368] usb 3-1.6: skipped 4 descriptors after interface <7>[ 6.212374] usb 3-1.6: skipped 4 descriptors after interface <7>[ 6.212381] usb 3-1.6: skipped 2 descriptors after interface <7>[ 6.212386] usb 3-1.6: skipped 5 descriptors after interface <7>[ 6.212394] usb 3-1.6: skipped 2 descriptors after interface <7>[ 6.212605] usb 3-1.6: default language 0x0409 <7>[ 6.213104] usb 3-1.6: udev 3, busnum 3, minor = 258 <6>[ 6.213110] usb 3-1.6: New USB device found, idVendor=413c, idProduct=8184 <6>[ 6.213116] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 6.213122] usb 3-1.6: Product: Dell Wireless 5540 <6>[ 6.213137] usb 3-1.6: Manufacturer: [ 6.213143] usb 3-1.6: SerialNumber: 3563970328033220 <7>[ 6.213229] PM: Adding info for usb:3-1.6 <7>[ 6.213249] usb 3-1.6: usb_probe_device <7>[ 6.213252] usb 3-1.6: configuration #1 chosen from 2 choices <7>[ 6.216476] usb 3-1.6: adding 3-1.6:1.0 (config #1, interface 0) <7>[ 6.216514] PM: Adding info for usb:3-1.6:1.0 <7>[ 6.216768] usb 3-1.6: adding 3-1.6:1.1 (config #1, interface 1) <7>[ 6.216800] PM: Adding info for usb:3-1.6:1.1 <7>[ 6.217188] PM: Adding info for No Bus:ep_8a <7>[ 6.217195] usb 3-1.6: adding 3-1.6:1.2 (config #1, interface 2) <7>[ 6.217221] PM: Adding info for usb:3-1.6:1.2 <7>[ 6.217544] PM: Adding info for No Bus:ep_01 <7>[ 6.217578] PM: Adding info for No Bus:ep_81 <7>[ 6.217590] usb 3-1.6: adding 3-1.6:1.3 (config #1, interface 3) <7>[ 6.217600] PM: Adding info for usb:3-1.6:1.3 <7>[ 6.217912] PM: Adding info for No Bus:ep_89 <7>[ 6.217918] usb 3-1.6: adding 3-1.6:1.4 (config #1, interface 4) <7>[ 6.217951] PM: Adding info for usb:3-1.6:1.4 <7>[ 6.218289] PM: Adding info for No Bus:ep_02 <7>[ 6.218325] PM: Adding info for No Bus:ep_82 <7>[ 6.218338] usb 3-1.6: adding 3-1.6:1.5 (config #1, interface 5) <7>[ 6.218347] PM: Adding info for usb:3-1.6:1.5 <7>[ 6.218910] PM: Adding info for No Bus:ep_88 <7>[ 6.218915] usb 3-1.6: adding 3-1.6:1.6 (config #1, interface 6) <7>[ 6.218949] PM: Adding info for usb:3-1.6:1.6 <7>[ 6.219286] PM: Adding info for No Bus:ep_86 <7>[ 6.219291] usb 3-1.6: adding 3-1.6:1.7 (config #1, interface 7) <7>[ 6.219335] PM: Adding info for usb:3-1.6:1.7 <7>[ 6.219628] usb 3-1.6: adding 3-1.6:1.8 (config #1, interface 8) <7>[ 6.219660] PM: Adding info for usb:3-1.6:1.8 <7>[ 6.220034] PM: Adding info for No Bus:ep_87 <7>[ 6.220040] usb 3-1.6: adding 3-1.6:1.9 (config #1, interface 9) <7>[ 6.220071] PM: Adding info for usb:3-1.6:1.9 <7>[ 6.220413] PM: Adding info for No Bus:ep_84 <7>[ 6.220419] usb 3-1.6: adding 3-1.6:1.10 (config #1, interface 10) <7>[ 6.220458] PM: Adding info for usb:3-1.6:1.10 <7>[ 6.220780] PM: Adding info for No Bus:ep_03 <7>[ 6.220816] PM: Adding info for No Bus:ep_83 <7>[ 6.220822] drivers/usb/core/inode.c: creating file '003' <7>[ 6.220853] PM: Adding info for No Bus:ep_00 <7>[ 6.220856] usb 3-1.6: rpm_suspend flags 0xc <7>[ 6.220858] usb 3-1.6: rpm_suspend returns -38 <7>[ 6.234453] PM: Adding info for No Bus:card0 <7>[ 6.234483] PM: Adding info for No Bus:pcmC0D3p <7>[ 6.234505] PM: Adding info for No Bus:pcmC0D1p <7>[ 6.234525] PM: Adding info for No Bus:pcmC0D0p <7>[ 6.234549] PM: Adding info for No Bus:pcmC0D0c <7>[ 6.234577] PM: Adding info for No Bus:input7 <6>[ 6.234595] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 <7>[ 6.234610] PM: Adding info for No Bus:event7 <7>[ 6.234632] PM: Adding info for No Bus:input8 <6>[ 6.234647] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 <7>[ 6.234660] PM: Adding info for No Bus:event8 <7>[ 6.234680] PM: Adding info for No Bus:controlC0 <7>[ 6.301047] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.301059] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.302364] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.302366] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.333547] cdc_acm 3-1.6:1.1: usb_probe_interface <7>[ 6.333551] cdc_acm 3-1.6:1.1: usb_probe_interface - got id <6>[ 6.333705] cdc_acm 3-1.6:1.1: ttyACM0: USB ACM device <7>[ 6.341069] PM: Adding info for No Bus:ttyACM0 <7>[ 6.341105] cdc_acm 3-1.6:1.1: rpm_suspend flags 0x4 <7>[ 6.341110] cdc_acm 3-1.6:1.1: rpm_suspend returns 0 <7>[ 6.341121] cdc_acm 3-1.6:1.3: usb_probe_interface <7>[ 6.341124] cdc_acm 3-1.6:1.3: usb_probe_interface - got id <6>[ 6.341370] cdc_acm 3-1.6:1.3: ttyACM1: USB ACM device <7>[ 6.356869] PM: Adding info for No Bus:ttyACM1 <7>[ 6.356985] cdc_acm 3-1.6:1.3: rpm_suspend flags 0x4 <7>[ 6.356990] cdc_acm 3-1.6:1.3: rpm_suspend returns 0 <7>[ 6.357008] cdc_acm 3-1.6:1.9: usb_probe_interface <7>[ 6.357011] cdc_acm 3-1.6:1.9: usb_probe_interface - got id <6>[ 6.357266] cdc_acm 3-1.6:1.9: ttyACM2: USB ACM device <7>[ 6.372904] PM: Adding info for No Bus:ttyACM2 <7>[ 6.372956] cdc_acm 3-1.6:1.9: rpm_suspend flags 0x4 <7>[ 6.372960] cdc_acm 3-1.6:1.9: rpm_suspend returns 0 <6>[ 6.372985] usbcore: registered new interface driver cdc_acm <6>[ 6.372988] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters <7>[ 6.372998] cdc_wdm 3-1.6:1.5: usb_probe_interface <7>[ 6.373001] cdc_wdm 3-1.6:1.5: usb_probe_interface - got id <7>[ 6.373024] cdc_wdm 3-1.6:1.5: looking for a minor, starting at 176 <7>[ 6.373052] PM: Adding info for No Bus:cdc-wdm0 <6>[ 6.373069] cdc_wdm 3-1.6:1.5: cdc-wdm0: USB WDM device <7>[ 6.373072] cdc_wdm 3-1.6:1.5: rpm_suspend flags 0x4 <7>[ 6.373077] cdc_wdm 3-1.6:1.5: rpm_suspend returns 0 <7>[ 6.373085] cdc_wdm 3-1.6:1.8: usb_probe_interface <7>[ 6.373088] cdc_wdm 3-1.6:1.8: usb_probe_interface - got id <7>[ 6.373092] cdc_wdm 3-1.6:1.8: looking for a minor, starting at 176 <7>[ 6.373116] PM: Adding info for No Bus:cdc-wdm1 <6>[ 6.373126] cdc_wdm 3-1.6:1.8: cdc-wdm1: USB WDM device <7>[ 6.373128] cdc_wdm 3-1.6:1.8: rpm_suspend flags 0x4 <7>[ 6.373130] cdc_wdm 3-1.6:1.8: rpm_suspend returns 0 <6>[ 6.373141] usbcore: registered new interface driver cdc_wdm <7>[ 6.373168] cdc_ether 3-1.6:1.6: usb_probe_interface <7>[ 6.373171] cdc_ether 3-1.6:1.6: usb_probe_interface - got id <7>[ 6.382086] PM: Adding info for No Bus:ep_05 <7>[ 6.382128] PM: Adding info for No Bus:ep_85 <7>[ 6.383028] PM: Adding info for No Bus:wwan0 <6>[ 6.383407] cdc_ether 3-1.6:1.6: wwan0: register 'cdc_ether' at usb-0000:00:1d.0-1.6, Mobile Broadband Network Device, 02:80:37:ec:02:00 <7>[ 6.383411] cdc_ether 3-1.6:1.6: rpm_suspend flags 0x4 <7>[ 6.383415] cdc_ether 3-1.6:1.6: rpm_suspend returns 0 <6>[ 6.383432] usbcore: registered new interface driver cdc_ether <7>[ 6.425215] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.425218] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.426753] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.426755] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.577196] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.577198] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.578732] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.578734] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.609225] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.609227] sd 0:0:0:0: rpm_resume returns 1 <7>[ 6.610645] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 6.610647] sd 0:0:0:0: rpm_resume returns 1 <7>[ 8.295240] PM: Adding info for platform:coretemp.0 <6>[ 8.295257] coretemp coretemp.0: TjMax is 100 C. <7>[ 8.295287] PM: Adding info for No Bus:hwmon0 <7>[ 8.295313] PM: Adding info for platform:coretemp.2 <6>[ 8.295331] coretemp coretemp.2: TjMax is 100 C. <7>[ 8.295354] PM: Adding info for No Bus:hwmon1 <7>[ 8.459554] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 8.459556] sd 0:0:0:0: rpm_resume returns 1 <7>[ 8.459573] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 8.459574] sd 0:0:0:0: rpm_resume returns 1 <7>[ 8.571989] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 8.571991] sd 0:0:0:0: rpm_resume returns 1 <7>[ 8.624112] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 8.624115] sd 0:0:0:0: rpm_resume returns 1 <7>[ 8.625600] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 8.625603] sd 0:0:0:0: rpm_resume returns 1 <7>[ 9.181197] PM: Adding info for No Bus:vcs2 <7>[ 9.181222] PM: Adding info for No Bus:vcsa2 <7>[ 9.181316] PM: Adding info for No Bus:vcs3 <7>[ 9.181334] PM: Adding info for No Bus:vcsa3 <7>[ 9.181437] PM: Adding info for No Bus:vcs4 <7>[ 9.181465] PM: Adding info for No Bus:vcsa4 <7>[ 9.181615] PM: Adding info for No Bus:vcs5 <7>[ 9.181642] PM: Adding info for No Bus:vcsa5 <7>[ 9.181775] PM: Adding info for No Bus:vcs6 <7>[ 9.181801] PM: Adding info for No Bus:vcsa6 <7>[ 9.182066] PM: Adding info for No Bus:vcs7 <7>[ 9.182092] PM: Adding info for No Bus:vcsa7 <7>[ 9.182411] PM: Adding info for No Bus:vcs8 <7>[ 9.182440] PM: Adding info for No Bus:vcsa8 <7>[ 9.182745] PM: Adding info for No Bus:vcs9 <7>[ 9.182778] PM: Adding info for No Bus:vcsa9 <7>[ 9.183001] PM: Adding info for No Bus:vcs10 <7>[ 9.183031] PM: Adding info for No Bus:vcsa10 <7>[ 9.183249] PM: Adding info for No Bus:vcs11 <7>[ 9.183281] PM: Adding info for No Bus:vcsa11 <7>[ 9.183501] PM: Adding info for No Bus:vcs12 <7>[ 9.183530] PM: Adding info for No Bus:vcsa12 <7>[ 9.511303] r8169 0000:06:00.0: rpm_resume flags 0x4 <7>[ 9.511306] r8169 0000:06:00.0: rpm_resume returns 1 <6>[ 9.517060] r8169 0000:06:00.0: eth0: link down <6>[ 9.517066] r8169 0000:06:00.0: eth0: link down <6>[ 9.517107] ADDRCONF(NETDEV_UP): eth0: link is not ready <7>[ 10.400426] PM: Adding info for No Bus:mixer <7>[ 10.533168] PM: Adding info for No Bus:dsp <7>[ 10.533190] PM: Adding info for No Bus:audio <7>[ 10.533219] PM: Adding info for No Bus:adsp <7>[ 10.698175] PM: Adding info for No Bus:seq <7>[ 10.731469] PM: Adding info for No Bus:sequencer <7>[ 10.731490] PM: Adding info for No Bus:sequencer2 <7>[ 11.061929] r8169 0000:06:00.0: rpm_resume flags 0x1 <7>[ 11.061938] r8169 0000:06:00.0: rpm_resume returns 1 <6>[ 11.061952] r8169 0000:06:00.0: eth0: link up <6>[ 11.062026] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <6>[ 11.562490] CPU 1 is now offline <7>[ 11.562896] PM: Removing info for No Bus:msr1 <7>[ 11.562964] PM: Removing info for No Bus:cpu1 <7>[ 11.565835] PM: Removing info for platform:coretemp.2 <7>[ 11.565871] PM: Removing info for No Bus:hwmon1 <7>[ 11.566018] PM: Adding info for platform:coretemp.3 <6>[ 11.566226] coretemp coretemp.3: TjMax is 100 C. <7>[ 11.566692] PM: Adding info for No Bus:hwmon1 <6>[ 11.577915] CPU 2 is now offline <7>[ 11.578288] PM: Removing info for No Bus:msr2 <7>[ 11.578350] PM: Removing info for No Bus:cpu2 <6>[ 11.579304] CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 <7>[ 11.579670] PM: Removing info for platform:coretemp.3 <7>[ 11.579703] PM: Removing info for No Bus:hwmon1 <6>[ 11.588408] CPU 3 is now offline <6>[ 11.588415] SMP alternatives: switching to UP code <7>[ 11.599629] PM: Removing info for No Bus:msr3 <7>[ 11.599954] PM: Removing info for No Bus:cpu3 <7>[ 11.701511] usb 3-1.6: link qh16-0001/ffff880014170a80 start 2 [1/0 us] <7>[ 11.722975] usb 3-1.6: link qh16-0001/ffff880014303980 start 3 [1/0 us] <7>[ 11.746977] usb 3-1.6: link qh16-0001/ffff880014303f00 start 4 [1/0 us] <7>[ 11.953285] usb 3-1.6: link qh8-0001/ffff880014303680 start 5 [1/0 us] <7>[ 14.334087] usb 3-1.6: unlink qh16-0001/ffff880014170a80 start 2 [1/0 us] <7>[ 14.342007] usb 3-1.6: unlink qh16-0001/ffff880014303980 start 3 [1/0 us] <7>[ 14.349973] usb 3-1.6: unlink qh16-0001/ffff880014303f00 start 4 [1/0 us] <7>[ 14.352618] ehci_hcd 0000:00:1d.0: reused qh ffff880014170a80 schedule <7>[ 14.352630] usb 3-1.6: link qh16-0001/ffff880014170a80 start 2 [1/0 us] <7>[ 20.195104] usb 3-1.6: unlink qh16-0001/ffff880014170a80 start 2 [1/0 us] <7>[ 20.202757] usb 3-1.6: unlink qh8-0001/ffff880014303680 start 5 [1/0 us] <7>[ 24.939320] sd 0:0:0:0: rpm_resume flags 0x4 <7>[ 24.939328] sd 0:0:0:0: rpm_resume returns 1 <6>[ 36.421727] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) <6>[ 38.659564] SysRq : Emergency Sync <4>[ 38.661308] Emergency Sync complete <6>[ 40.357371] SysRq : Emergency Remount R/O <6>[ 40.699316] SysRq : Emergency Sync <4>[ 40.730146] Emergency Sync complete <4>[ 40.730158] Emergency Remount complete <7>[ 50.048499] iwlagn 0000:03:00.0: rpm_resume flags 0x4 <7>[ 50.048508] iwlagn 0000:03:00.0: rpm_resume returns 1 <7>[ 50.050502] PM: Removing info for No Bus:wlan0 <7>[ 50.055704] PM: Removing info for No Bus:rfkill0 <7>[ 50.055768] PM: Removing info for No Bus:phy0 <6>[ 50.056726] iwlagn 0000:03:00.0: PCI INT A disabled <6>[ 52.233183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: <6>[ 52.233190] iwlagn: Copyright(c) 2003-2010 Intel Corporation <6>[ 52.233341] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 <7>[ 52.233427] iwlagn 0000:03:00.0: setting latency timer to 64 <6>[ 52.233550] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0 <6>[ 52.251291] iwlagn 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6 <6>[ 52.251296] iwlagn 0000:03:00.0: Device SKU: 0X9 <6>[ 52.251301] iwlagn 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 <6>[ 52.251341] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels <7>[ 52.252109] iwlagn 0000:03:00.0: irq 51 for MSI/MSI-X <7>[ 52.254955] PM: Adding info for No Bus:0000:03:00.0 <7>[ 52.259434] PM: Removing info for No Bus:0000:03:00.0 <6>[ 52.259503] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.2 build 35905 <7>[ 52.261166] PM: Adding info for No Bus:phy1 <7>[ 52.261236] PM: Adding info for No Bus:rfkill1 <7>[ 52.261290] ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs' <7>[ 52.261437] PM: Adding info for No Bus:wlan0 <7>[ 54.307283] iwlagn 0000:03:00.0: rpm_resume flags 0x4 <7>[ 54.307293] iwlagn 0000:03:00.0: rpm_resume returns 1 <7>[ 54.309359] PM: Removing info for No Bus:wlan0 <7>[ 54.312709] PM: Removing info for No Bus:rfkill1 <7>[ 54.312771] PM: Removing info for No Bus:phy1 <6>[ 54.314310] iwlagn 0000:03:00.0: PCI INT A disabled <0>[ 56.379474] general protection fault: 0000 [#1] SMP <0>[ 56.379714] last sysfs file: /sys/module/iwlcore/refcnt <4>[ 56.379850] CPU 0 <4>[ 56.379906] Modules linked in: iwlcore(+) ext2 mbcache snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss acpi_cpufreq freq_table mperf coretemp hwmon kvm cdc_ether usbnet cdc_wdm cdc_acm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm sr_mod sg ehci_hcd snd_timer snd dell_wmi sparse_keymap psmouse wmi soundcore snd_page_alloc r8169 mii tpm_tis tpm cdrom tpm_bios processor thermal video evdev i2c_i801 i2c_core xhci_hcd backlight ac button battery [last unloaded: iwlcore] <4>[ 56.383409] <4>[ 56.383535] Pid: 5077, comm: modprobe Not tainted 2.6.38.6-dbg #1 Dell Inc. Dell System XPS L502X/0YR8NN <4>[ 56.383998] RIP: 0010:[] [] __kmalloc+0xd8/0x104 <4>[ 56.384270] RSP: 0018:ffff880013467de8 EFLAGS: 00010006 <4>[ 56.384407] RAX: 0000000000000000 RBX: ffff880014802540 RCX: ffff880015c14528 <4>[ 56.384549] RDX: 0000000100000000 RSI: 4000000000000000 RDI: 0000000000000007 <4>[ 56.384690] RBP: ffff880013467e08 R08: 0000000000000340 R09: ffff880014b135f0 <4>[ 56.384832] R10: 0000000000000c75 R11: ffff880013467e08 R12: 00000000000080d0 <4>[ 56.384973] R13: 0000000000000246 R14: ffffffff81179e6e R15: ffff880014beed80 <4>[ 56.385116] FS: 00007f518f243700(0000) GS:ffff880015c00000(0000) knlGS:0000000000000000 <4>[ 56.385328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 56.385465] CR2: 00007f518e6ae00f CR3: 0000000013968000 CR4: 00000000000406f0 <4>[ 56.385607] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[ 56.385749] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 56.385893] Process modprobe (pid: 5077, threadinfo ffff880013466000, task ffff880012beab20) <0>[ 56.386104] Stack: <4>[ 56.386229] ffffffffa0082830 ffffffff814d3e51 ffffffffa0082880 0000000000000000 <4>[ 56.386635] ffff880013467e18 ffffffff81179e6e ffff880013467e38 ffffffff81179e87 <4>[ 56.387042] ffff880013467e58 0000000000000246 ffff880013467e68 ffffffff81179ebc <0>[ 56.387446] Call Trace: <4>[ 56.387581] [] kzalloc+0xf/0x11 <4>[ 56.387717] [] kobject_create+0x17/0x35 <4>[ 56.387857] [] kobject_create_and_add+0x17/0x66 <4>[ 56.387999] [] load_module+0x140a/0x164f <4>[ 56.388140] [] sys_init_module+0x45/0x1dc <4>[ 56.388281] [] system_call_fastpath+0x16/0x1b <0>[ 56.388419] Code: 48 8b 0b 65 48 03 0c 25 58 c4 00 00 48 8b 31 48 85 f6 75 13 44 89 e6 4c 89 f2 48 89 df e8 92 f5 ff ff 48 89 c6 eb 0b 48 63 43 18 <48> 8b 04 06 48 89 01 41 55 9d 48 85 f6 74 11 66 45 85 e4 79 0b <1>[ 56.391914] RIP [] __kmalloc+0xd8/0x104 <4>[ 56.392103] RSP <4>[ 56.392234] ---[ end trace a27a59cbbd08e454 ]--- <0>[ 65.859650] general protection fault: 0000 [#2] SMP <0>[ 65.859887] last sysfs file: /sys/module/iwlcore/refcnt <4>[ 65.860023] CPU 0 <4>[ 65.860080] Modules linked in: iwlcore(+) ext2 mbcache snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss acpi_cpufreq freq_table mperf coretemp hwmon kvm cdc_ether usbnet cdc_wdm cdc_acm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm sr_mod sg ehci_hcd snd_timer snd dell_wmi sparse_keymap psmouse wmi soundcore snd_page_alloc r8169 mii tpm_tis tpm cdrom tpm_bios processor thermal video evdev i2c_i801 i2c_core xhci_hcd backlight ac button battery [last unloaded: iwlcore] <4>[ 65.863585] <4>[ 65.863711] Pid: 5032, comm: bash Tainted: G D 2.6.38.6-dbg #1 Dell Inc. Dell System XPS L502X/0YR8NN <4>[ 65.864179] RIP: 0010:[] [] kmem_cache_alloc+0x55/0x81 <4>[ 65.864454] RSP: 0018:ffff8800137eddb0 EFLAGS: 00010006 <4>[ 65.864591] RAX: 0000000000000000 RBX: ffff880014802540 RCX: ffff880015c14528 <4>[ 65.864733] RDX: 0000000000000000 RSI: 4000000000000000 RDI: ffff880014802540 <4>[ 65.864874] RBP: ffff8800137eddd0 R08: 0000000000014950 R09: 0000000000000001 <4>[ 65.865016] R10: 0000000000014900 R11: 0000000000000000 R12: 00000000000000d0 <4>[ 65.865158] R13: 0000000000000246 R14: ffffffff8104e258 R15: ffff8800136fb250 <4>[ 65.865301] FS: 00007f27ee498700(0000) GS:ffff880015c00000(0000) knlGS:0000000000000000 <4>[ 65.865514] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b <4>[ 65.865652] CR2: 0000000000c3a280 CR3: 0000000011a89000 CR4: 00000000000406f0 <4>[ 65.865793] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[ 65.865935] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 65.866078] Process bash (pid: 5032, threadinfo ffff8800137ec000, task ffff8800136fb250) <0>[ 65.866289] Stack: <4>[ 65.866413] ffff880014b1a0c0 ffff880012beab20 0000000000000010 ffff880012942000 <4>[ 65.866819] ffff8800137ede10 ffffffff8104e258 0000000000000000 ffff880012942000 <4>[ 65.867223] ffff8800137ede10 0000000001200011 ffff880012beab20 0000000000000000 <0>[ 65.867631] Call Trace: <4>[ 65.867764] [] copy_creds+0xce/0x161 <4>[ 65.867904] [] copy_process+0x23a/0xfea <4>[ 65.868043] [] ? get_empty_filp+0x99/0x124 <4>[ 65.868182] [] do_fork+0xf9/0x248 <4>[ 65.868321] [] ? fd_install+0x31/0x5d <4>[ 65.868461] [] ? do_pipe_flags+0x8a/0xc7 <4>[ 65.868600] [] sys_clone+0x23/0x25 <4>[ 65.868736] [] stub_clone+0x13/0x20 <4>[ 65.868874] [] ? system_call_fastpath+0x16/0x1b <0>[ 65.869012] Code: 48 8b 0b 65 48 03 0c 25 58 c4 00 00 48 8b 31 48 85 f6 75 13 44 89 e6 4c 89 f2 48 89 df e8 69 fd ff ff 48 89 c6 eb 0b 48 63 43 18 <48> 8b 04 06 48 89 01 41 55 9d 48 85 f6 74 11 66 45 85 e4 79 0b <1>[ 65.872506] RIP [] kmem_cache_alloc+0x55/0x81 <4>[ 65.872696] RSP <4>[ 65.872829] ---[ end trace a27a59cbbd08e455 ]--- <0>[ 65.875748] general protection fault: 0000 [#3] SMP <0>[ 65.875984] last sysfs file: /sys/module/iwlcore/refcnt <4>[ 65.876119] CPU 0 <4>[ 65.876175] Modules linked in: iwlcore(+) ext2 mbcache snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss acpi_cpufreq freq_table mperf coretemp hwmon kvm cdc_ether usbnet cdc_wdm cdc_acm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm sr_mod sg ehci_hcd snd_timer snd dell_wmi sparse_keymap psmouse wmi soundcore snd_page_alloc r8169 mii tpm_tis tpm cdrom tpm_bios processor thermal video evdev i2c_i801 i2c_core xhci_hcd backlight ac button battery [last unloaded: iwlcore] <4>[ 65.879674] <4>[ 65.879800] Pid: 1, comm: init Tainted: G D 2.6.38.6-dbg #1 Dell Inc. Dell System XPS L502X/0YR8NN <4>[ 65.880267] RIP: 0010:[] [] kmem_cache_alloc+0x55/0x81 <4>[ 65.880536] RSP: 0018:ffff88001487ddb0 EFLAGS: 00010006 <4>[ 65.880672] RAX: 0000000000000000 RBX: ffff880014802540 RCX: ffff880015c14528 <4>[ 65.882794] RDX: 0000000000000000 RSI: 4000000000000000 RDI: ffff880014802540 <4>[ 65.882936] RBP: ffff88001487ddd0 R08: 0000000000014950 R09: dead000000200200 <4>[ 65.883077] R10: dead000000100100 R11: 0000000000000001 R12: 00000000000000d0 <4>[ 65.883219] R13: 0000000000000246 R14: ffffffff8104e258 R15: ffff880014880000 <4>[ 65.883361] FS: 00007f1ed127c700(0000) GS:ffff880015c00000(0000) knlGS:0000000000000000 <4>[ 65.883575] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b <4>[ 65.883712] CR2: 0000000000609900 CR3: 0000000014b54000 CR4: 00000000000406f0 <4>[ 65.883853] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[ 65.883994] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 65.884137] Process init (pid: 1, threadinfo ffff88001487c000, task ffff880014880000) <0>[ 65.884347] Stack: <4>[ 65.884471] ffff880012be4f00 ffff880012bedd70 0000000000000010 ffff880013ed2000 <4>[ 65.884876] ffff88001487de10 ffffffff8104e258 0000000000000000 ffff880013ed2000 <4>[ 65.885283] ffff88001487de10 0000000001200011 ffff880012bedd70 0000000000000000 <0>[ 65.885691] Call Trace: <4>[ 65.885822] [] copy_creds+0xce/0x161 <4>[ 65.885961] [] copy_process+0x23a/0xfea <4>[ 65.886100] [] ? user_path_at+0x66/0x95 <4>[ 65.886241] [] ? do_wait+0x1ba/0x1fd <4>[ 65.886379] [] do_fork+0xf9/0x248 <4>[ 65.886516] [] ? prepare_creds+0x23/0x70 <4>[ 65.886657] [] ? sigprocmask+0xa0/0xc3 <4>[ 65.886796] [] sys_clone+0x23/0x25 <4>[ 65.886932] [] stub_clone+0x13/0x20 <4>[ 65.887069] [] ? system_call_fastpath+0x16/0x1b <0>[ 65.887208] Code: 48 8b 0b 65 48 03 0c 25 58 c4 00 00 48 8b 31 48 85 f6 75 13 44 89 e6 4c 89 f2 48 89 df e8 69 fd ff ff 48 89 c6 eb 0b 48 63 43 18 <48> 8b 04 06 48 89 01 41 55 9d 48 85 f6 74 11 66 45 85 e4 79 0b <1>[ 65.890710] RIP [] kmem_cache_alloc+0x55/0x81 <4>[ 65.890902] RSP --Boundary-00=_dI/0NlIKhSVqAJm--