MIME-Version: 1.0
In-Reply-To: <BANLkTiknq4jDQY2-z53QXoyHUb4b4=Oojw@mail.gmail.com>
References: <BANLkTinoAmna3mtMWY2Ai82wbGu-T9FzMQ@mail.gmail.com>
	<BANLkTi=Z=i9_WoXX=YbQtF-8imKizRPM+w@mail.gmail.com>
	<BANLkTim_uY0Di13RDHZxOpVQZaDfG3hc8A@mail.gmail.com>
	<19903.49991.848934.183819@gargle.gargle.HOWL>
	<BANLkTi=1E-Ma=N0D-gP_baSjMOvmfM-2KQ@mail.gmail.com>
	<BANLkTi=wXtCNY7TUUpfYpHux8piL09+RuQ@mail.gmail.com>
	<BANLkTiknq4jDQY2-z53QXoyHUb4b4=Oojw@mail.gmail.com>
Date: Fri, 6 May 2011 12:24:06 -0400
Message-ID: <BANLkTi=tZDXs=ja+YKXFVyP3FeuxmWLtuA@mail.gmail.com> (sfid-20110506_182413_078661_4229BCCA)
Subject: Re: error initializing AR7010+AR9280 Xbox 802.11n adapter
From: George Nychis <gnychis@gmail.com>
To: Sujith <m.sujith@gmail.com>
Cc: Mark Davis <marked86@gmail.com>, linux-wireless@vger.kernel.org,
	Steven <srumney@sbcglobal.net>
Content-Type: text/plain; charset=ISO-8859-1
Sender: linux-wireless-owner@vger.kernel.org

I decided to get the Sony BR100 and try it out, given that the
WikiDevi page for the device seems to suggest that it works with
ath9k_htc:
http://www.wikidevi.com/wiki/Sony_UWA-BR100

My confidence is also a little higher given that someone has it
working in Windows, also.

But, using the most recent firmware and compat-wireless, I get the
same exact error that I did with the Xbox adapter:
[ 1277.228258] usb 2-2: ath9k_htc: Transferred FW: htc_7010.fw, size: 72996
[ 1278.228930] ath9k_htc 2-2:1.0: ath9k_htc: Target is unresponsive
[ 1278.229788] Failed to initialize the device
[ 1279.029952] ath9k_htc: probe of 2-2:1.0 failed with error -22

The WikiDev page mentions that it worked as of Jan. 8, 2011.  So I
rolled back compat-wireless to that date and grabbed the old firmware
from the old tree.

Unfortunately, I still get the same error:
[  386.398366] usb 1-1: USB disconnect, address 4
[  388.412466] usb 1-1: new high speed USB device using ehci_hcd and address 5
[  389.113687] usb 1-1: ath9k_htc: Transferred FW: ar7010_1_1.fw, size: 70624
[  390.112282] usb 1-1: ath9k_htc: Target is unresponsive
[  390.112308] Failed to initialize the device
[  390.113658] ath9k_hif_usb: probe of 1-1:1.0 failed with error -22

So, either this person had some form of magic, or I am missing
something... I'd be curious to try it in Windows.  BTW, it shows up in
Mac OSX as "Buffalo" ...

(CEWL 1):

  Product ID:	0x017f
  Vendor ID:	0x0411  (BUFFALO INC.)
  Version:	 2.02
  Serial Number:	12345
  Speed:	Up to 480 Mb/sec
  Manufacturer:	BUFFALO
  Location ID:	0xfd100000
  Current Available (mA):	500
  Current Required (mA):	Unknown (Device has not been configured)


On Tue, May 3, 2011 at 2:39 PM, George Nychis <gnychis@gmail.com> wrote:
> Has anyone tried either of these with ath9k_htc:
> Sony UWA-BR100
> TiVo AN0100
>
> I'm curious if anyone has had success with them, and if they are UB94
> based. ?It'd be great to know.
>