Return-path: Received: from oproxy1-pub.bluehost.com ([66.147.249.253]:33276 "HELO oproxy1-pub.bluehost.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753451Ab1F3TFl (ORCPT ); Thu, 30 Jun 2011 15:05:41 -0400 Message-ID: <4E0CC8FC.9050906@boundarydevices.com> (sfid-20110630_210545_559936_D6C3489B) Date: Thu, 30 Jun 2011 12:05:32 -0700 From: Troy Kisky MIME-Version: 1.0 To: mangesh gadre CC: linux-wireless@vger.kernel.org Subject: Re: WL1271: WLAN_IRQ not working References: <4E0942CA.9010402@boundarydevices.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: On 6/29/2011 11:24 PM, mangesh gadre wrote: > Hi, > > Please check if your wifi enable pin is in right state. secondly check if > regulator section of your chip is actually powering up wifi internal core . > check your circuit against standard ref circuit. > I have seen similar issue and there was some resistor missing in feedback > path of volatge regulator output path from chip. Most probably wifi section > of your chip is not powered up. I think the problem is solved, but can you point me to a "standard ref circuit" for TiWiR2. Maybe, I can avoid future problems. Thanks Troy