Return-path: Received: from mail-wy0-f174.google.com ([74.125.82.174]:62628 "EHLO mail-wy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754186Ab1FQEvZ convert rfc822-to-8bit (ORCPT ); Fri, 17 Jun 2011 00:51:25 -0400 Received: by wyb38 with SMTP id 38so53997wyb.19 for ; Thu, 16 Jun 2011 21:51:23 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: References: Date: Fri, 17 Jun 2011 10:21:23 +0530 Message-ID: (sfid-20110617_065130_119187_E3814F6B) Subject: Re: can mesh(802.11s) be supported in 802.11n? From: Mohammed Shafi To: b z Cc: linux-wireless@vger.kernel.org, javier@cozybit.com Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: On Wed, Jun 15, 2011 at 6:13 PM, b z wrote: > I have got 2 802.11n wireless routers using ralink rt3052f soc chip,mimo 2x2 > burned with openwrt (kernel 2.6.37.6, compat-wireless-2011-05-27) > > I configured them as mesh point respectively, ?then > #iw dev wlan0 station dump > > but the tx rate and rx rate still not exceed 54mbps, that is mean the > ht mode(300mbps) is not been actived > > can anyone tell me how to active the 802.11n ht mode in mesh? > it is the problem with mac80211 or rt2800pci driver? > or mesh using 802.11n is not implemented in the current kernel? yes HT mode is not yet supported in mesh (in mac80211). it should be implemented in mac80211 > > will it be implemented in the future? some time back Luis sent this link http://www.youtube.com/watch?v=sSUbCiEEP0k > thank! > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at ?http://vger.kernel.org/majordomo-info.html > -- shafi