Return-path: Received: from mx1.chubb.wattle.id.au ([128.177.28.167]:55585 "EHLO mx1.chubb.wattle.id.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751670Ab1FUEiV (ORCPT ); Tue, 21 Jun 2011 00:38:21 -0400 Date: Tue, 21 Jun 2011 14:38:08 +1000 Message-ID: (sfid-20110621_063824_291164_7A49CD27) From: "Peter Chubb" To: Larry Finger Cc: Peter Chubb , linux-wireless@vger.kernel.org Subject: Re: State of rtl8192CU driver? In-Reply-To: <4E001D55.50503@lwfinger.net> References: <4DFB6004.1060006@lwfinger.net> <4DFFC1D9.8030803@lwfinger.net> <4E001D55.50503@lwfinger.net> MIME-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset=US-ASCII Sender: linux-wireless-owner@vger.kernel.org List-ID: >>>>> "Larry" == Larry Finger writes: Larry> On 06/20/2011 10:24 PM, Peter Chubb wrote: >>>>>>> "Larry" == Larry Finger writes: >> Larry> Peter, I found a problem with rtl8192cu since the 3.0-rcX Larry> merge. Please go to Larry> https://bugzilla.kernel.org/show_bug.cgi?id=38012 and try the Larry> patch found there. >> >> Thanks. I applied the patch and tried the result. >> Larry> What do you get for an md5sum for the firmware? I get Larry> finger@larrylap:~> md5sum /lib/firmware/rtlwifi/rtl8192cufw.bin Larry> 943e9b714a926e630b8152d7aad91d2e Larry> /lib/firmware/rtlwifi/rtl8192cufw.bin same. Larry> Other than that, I have no explanation for what you see. I can Larry> connect with mine using WEP, WPA and WPA2 encryption. It also Larry> connects with an 802.11n AP using 40 MHz channels. Hmmmm. I'm using a tip-of-Linus's tree kernel. Maybe there's something else interfering in my config? If yours works, then the problem must be here. Larry> The only difference between your system and mine is that I am Larry> using the wireless-testing tree, not the mainline tree, but I Larry> just checked the sources. The only differences were the most Larry> recent commits. Very strange. I'll dig around a bit more and see if I can sus it out. Peter C