Return-path: Received: from mms1.broadcom.com ([216.31.210.17]:2233 "EHLO mms1.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161216Ab1FALqY (ORCPT ); Wed, 1 Jun 2011 07:46:24 -0400 From: "Roland Vossen" To: gregkh@suse.de cc: devel@linuxdriverproject.org, linux-wireless@vger.kernel.org Subject: [PATCH 09/83] staging: brcm80211: emptied wlioctl.h Date: Wed, 1 Jun 2011 13:44:54 +0200 Message-ID: <1306928768-7501-9-git-send-email-rvossen@broadcom.com> (sfid-20110601_134636_235521_F3B40E2E) In-Reply-To: <1306928768-7501-1-git-send-email-rvossen@broadcom.com> References: <1306928768-7501-1-git-send-email-rvossen@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Code cleanup. Broadcom specific ioctl functionality is not necessary in the Linux world. Deleted unused defines and structs from wlioctl.h. Moved softmac specific items from wlioctl.h to softmac header files, same for fullmac items. Moved shared fullmac/softmac definitions to other header files. Signed-off-by: Roland Vossen Reviewed-by: Arend van Spriel --- drivers/staging/brcm80211/brcmfmac/dhd.h | 714 +++++++++-- drivers/staging/brcm80211/brcmfmac/dhd_common.c | 1 - .../staging/brcm80211/brcmfmac/dhd_custom_gpio.c | 1 - drivers/staging/brcm80211/brcmfmac/dhd_proto.h | 1 - drivers/staging/brcm80211/brcmfmac/dhdioctl.h | 80 -- drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c | 1 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h | 1 - drivers/staging/brcm80211/brcmfmac/wl_iw.c | 20 +- drivers/staging/brcm80211/brcmfmac/wl_iw.h | 2 - drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h | 2 - drivers/staging/brcm80211/brcmsmac/d11.h | 13 +- .../staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h | 40 +- drivers/staging/brcm80211/brcmsmac/wl_dbg.h | 2 +- drivers/staging/brcm80211/brcmsmac/wl_mac80211.c | 1 - drivers/staging/brcm80211/brcmsmac/wl_mac80211.h | 4 + drivers/staging/brcm80211/brcmsmac/wlc_alloc.c | 1 - drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c | 1 - drivers/staging/brcm80211/brcmsmac/wlc_antsel.c | 9 +- drivers/staging/brcm80211/brcmsmac/wlc_bmac.c | 2 - drivers/staging/brcm80211/brcmsmac/wlc_channel.c | 1 - drivers/staging/brcm80211/brcmsmac/wlc_key.h | 2 + drivers/staging/brcm80211/brcmsmac/wlc_main.c | 29 +- drivers/staging/brcm80211/brcmsmac/wlc_main.h | 2 +- drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c | 1 - drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h | 55 + drivers/staging/brcm80211/brcmsmac/wlc_pub.h | 103 ++- drivers/staging/brcm80211/brcmsmac/wlc_rate.c | 1 - drivers/staging/brcm80211/brcmsmac/wlc_scb.h | 2 + drivers/staging/brcm80211/brcmsmac/wlc_stf.c | 1 - drivers/staging/brcm80211/include/bcmdefs.h | 52 + drivers/staging/brcm80211/include/bcmwifi.h | 58 + drivers/staging/brcm80211/include/wlioctl.h | 1345 -------------------- 32 files changed, 993 insertions(+), 1555 deletions(-) diff --git a/drivers/staging/brcm80211/brcmfmac/dhd.h b/drivers/staging/brcm80211/brcmfmac/dhd.h index a726b49..6156062 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhd.h +++ b/drivers/staging/brcm80211/brcmfmac/dhd.h @@ -34,15 +34,167 @@ #include #include #include +#include "bcmdefs.h" /* The kernel threading is sdio-specific */ - -#include +#include "bcmwifi.h" +#include "proto/802.11.h" +#include "proto/bcmeth.h" +#include "proto/bcmevent.h" /* Forward decls */ struct dhd_bus; struct dhd_prot; struct dhd_info; +#define WLC_UP 2 +#define WLC_SET_PROMISC 10 +#define WLC_GET_RATE 12 +#define WLC_GET_INFRA 19 +#define WLC_SET_INFRA 20 +#define WLC_GET_AUTH 21 +#define WLC_SET_AUTH 22 +#define WLC_GET_BSSID 23 +#define WLC_GET_SSID 25 +#define WLC_SET_SSID 26 +#define WLC_GET_CHANNEL 29 +#define WLC_GET_SRL 31 +#define WLC_GET_LRL 33 +#define WLC_GET_RADIO 37 +#define WLC_SET_RADIO 38 +#define WLC_GET_PHYTYPE 39 +#define WLC_SET_KEY 45 +#define WLC_SET_PASSIVE_SCAN 49 +#define WLC_SCAN 50 +#define WLC_SCAN_RESULTS 51 +#define WLC_DISASSOC 52 +#define WLC_REASSOC 53 +#define WLC_SET_ROAM_TRIGGER 55 +#define WLC_SET_ROAM_DELTA 57 +#define WLC_GET_DTIMPRD 77 +#define WLC_SET_COUNTRY 84 +#define WLC_GET_PM 85 +#define WLC_SET_PM 86 +#define WLC_GET_AP 117 +#define WLC_SET_AP 118 +#define WLC_GET_RSSI 127 +#define WLC_GET_WSEC 133 +#define WLC_SET_WSEC 134 +#define WLC_GET_PHY_NOISE 135 +#define WLC_GET_BSS_INFO 136 +#define WLC_SET_SCAN_CHANNEL_TIME 185 +#define WLC_SET_SCAN_UNASSOC_TIME 187 +#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 +#define WLC_GET_VALID_CHANNELS 217 +#define WLC_GET_KEY_PRIMARY 235 +#define WLC_SET_KEY_PRIMARY 236 +#define WLC_SET_SCAN_PASSIVE_TIME 258 +#define WLC_GET_VAR 262 /* get value of named variable */ +#define WLC_SET_VAR 263 /* set named variable to value */ + +/* phy types (returned by WLC_GET_PHYTPE) */ +#define WLC_PHY_TYPE_A 0 +#define WLC_PHY_TYPE_B 1 +#define WLC_PHY_TYPE_G 2 +#define WLC_PHY_TYPE_N 4 +#define WLC_PHY_TYPE_LP 5 +#define WLC_PHY_TYPE_SSN 6 +#define WLC_PHY_TYPE_HT 7 +#define WLC_PHY_TYPE_LCN 8 +#define WLC_PHY_TYPE_NULL 0xf + +#define WL_PKT_FILTER_FIXED_LEN offsetof(wl_pkt_filter_t, u) +#define WL_PKT_FILTER_PATTERN_FIXED_LEN offsetof(wl_pkt_filter_pattern_t, mask_and_pattern) + +#define WL_EVENTING_MASK_LEN 16 + +#define TOE_TX_CSUM_OL 0x00000001 +#define TOE_RX_CSUM_OL 0x00000002 + +/* maximum channels returned by the get valid channels iovar */ +#define WL_NUMCHANNELS 64 + +#define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */ + +/* size of wl_scan_params not including variable length array */ +#define WL_SCAN_PARAMS_FIXED_SIZE 64 + +/* masks for channel and ssid count */ +#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff +#define WL_SCAN_PARAMS_NSSID_SHIFT 16 + +#define WL_SCAN_ACTION_START 1 +#define WL_SCAN_ACTION_CONTINUE 2 +#define WL_SCAN_ACTION_ABORT 3 + +#define ISCAN_REQ_VERSION 1 + +/* wl_iscan_results status values */ +#define WL_SCAN_RESULTS_SUCCESS 0 +#define WL_SCAN_RESULTS_PARTIAL 1 +#define WL_SCAN_RESULTS_PENDING 2 +#define WL_SCAN_RESULTS_ABORTED 3 +#define WL_SCAN_RESULTS_NO_MEM 4 + +#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */ +#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */ + +#define IBSS_MED 15 /* Mediom in-bss congestion percentage */ +#define IBSS_HI 25 /* Hi in-bss congestion percentage */ +#define OBSS_MED 12 +#define OBSS_HI 25 +#define INTERFER_MED 5 +#define INTERFER_HI 10 + +#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */ +#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */ +#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */ +#define CCA_FLAGS_PREFER_1_6_11 0x10 +#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */ + +#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */ +#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */ +#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */ +#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */ +#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */ + +#define WL_NUM_RPI_BINS 8 +#define WL_RM_TYPE_BASIC 1 +#define WL_RM_TYPE_CCA 2 +#define WL_RM_TYPE_RPI 3 + +#define WL_RM_FLAG_PARALLEL (1<<0) + +#define WL_RM_FLAG_LATE (1<<1) +#define WL_RM_FLAG_INCAPABLE (1<<2) +#define WL_RM_FLAG_REFUSED (1<<3) + +#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ +#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ +#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ +#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ +#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */ + +#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ +#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */ +#define WLC_IOCTL_MAXLEN 8192 + +#define DHD_IF_VIF 0x01 /* Virtual IF (Hidden from user) */ + +/* optionally set by a module_param_string() */ +#define MOD_PARAM_PATHLEN 2048 + +/* For supporting multiple interfaces */ +#define DHD_MAX_IFS 16 +#define DHD_DEL_IF -0xe +#define DHD_BAD_IF -0xf + +enum cust_gpio_modes { + WLAN_RESET_ON, + WLAN_RESET_OFF, + WLAN_POWER_ON, + WLAN_POWER_OFF +}; + /* The level of bus communication with the dongle */ enum dhd_bus_state { DHD_BUS_DOWN, /* Not ready for frame transfers */ @@ -50,6 +202,316 @@ enum dhd_bus_state { DHD_BUS_DATA /* Ready for frame transfers */ }; +/* Pattern matching filter. Specifies an offset within received packets to + * start matching, the pattern to match, the size of the pattern, and a bitmask + * that indicates which bits within the pattern should be matched. + */ +typedef struct wl_pkt_filter_pattern { + u32 offset; /* Offset within received packet to start pattern matching. + * Offset '0' is the first byte of the ethernet header. + */ + u32 size_bytes; /* Size of the pattern. Bitmask must be the same size. */ + u8 mask_and_pattern[1]; /* Variable length mask and pattern data. mask starts + * at offset 0. Pattern immediately follows mask. + */ +} wl_pkt_filter_pattern_t; + +/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ +typedef struct wl_pkt_filter { + u32 id; /* Unique filter id, specified by app. */ + u32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ + u32 negate_match; /* Negate the result of filter matches */ + union { /* Filter definitions */ + wl_pkt_filter_pattern_t pattern; /* Pattern matching filter */ + } u; +} wl_pkt_filter_t; + +/* IOVAR "pkt_filter_enable" parameter. */ +typedef struct wl_pkt_filter_enable { + u32 id; /* Unique filter id */ + u32 enable; /* Enable/disable bool */ +} wl_pkt_filter_enable_t; + +/* BSS info structure + * Applications MUST CHECK ie_offset field and length field to access IEs and + * next bss_info structure in a vector (in wl_scan_results_t) + */ +typedef struct wl_bss_info { + u32 version; /* version field */ + u32 length; /* byte length of data in this record, + * starting at version and including IEs + */ + u8 BSSID[ETH_ALEN]; + u16 beacon_period; /* units are Kusec */ + u16 capability; /* Capability information */ + u8 SSID_len; + u8 SSID[32]; + struct { + uint count; /* # rates in this set */ + u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ + } rateset; /* supported rates */ + chanspec_t chanspec; /* chanspec for bss */ + u16 atim_window; /* units are Kusec */ + u8 dtim_period; /* DTIM period */ + s16 RSSI; /* receive signal strength (in dBm) */ + s8 phy_noise; /* noise (in dBm) */ + + u8 n_cap; /* BSS is 802.11N Capable */ + u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */ + u8 ctl_ch; /* 802.11N BSS control channel number */ + u32 reserved32[1]; /* Reserved for expansion of BSS properties */ + u8 flags; /* flags */ + u8 reserved[3]; /* Reserved for expansion of BSS properties */ + u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ + + u16 ie_offset; /* offset at which IEs start, from beginning */ + u32 ie_length; /* byte length of Information Elements */ + s16 SNR; /* average SNR of during frame reception */ + /* Add new fields here */ + /* variable length Information Elements */ +} wl_bss_info_t; + +typedef struct wlc_ssid { + u32 SSID_len; + unsigned char SSID[32]; +} wlc_ssid_t; + +typedef struct wl_scan_params { + wlc_ssid_t ssid; /* default: {0, ""} */ + u8 bssid[ETH_ALEN]; /* default: bcast */ + s8 bss_type; /* default: any, + * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT + */ + u8 scan_type; /* flags, 0 use default */ + s32 nprobes; /* -1 use default, number of probes per channel */ + s32 active_time; /* -1 use default, dwell time per channel for + * active scanning + */ + s32 passive_time; /* -1 use default, dwell time per channel + * for passive scanning + */ + s32 home_time; /* -1 use default, dwell time for the home channel + * between channel scans + */ + s32 channel_num; /* count of channels and ssids that follow + * + * low half is count of channels in channel_list, 0 + * means default (use all available channels) + * + * high half is entries in wlc_ssid_t array that + * follows channel_list, aligned for s32 (4 bytes) + * meaning an odd channel count implies a 2-byte pad + * between end of channel_list and first ssid + * + * if ssid count is zero, single ssid in the fixed + * parameter portion is assumed, otherwise ssid in + * the fixed portion is ignored + */ + u16 channel_list[1]; /* list of chanspecs */ +} wl_scan_params_t; + +/* incremental scan struct */ +typedef struct wl_iscan_params { + u32 version; + u16 action; + u16 scan_duration; + wl_scan_params_t params; +} wl_iscan_params_t; + +/* 3 fields + size of wl_scan_params, not including variable length array */ +#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t)) + +typedef struct wl_scan_results { + u32 buflen; + u32 version; + u32 count; + wl_bss_info_t bss_info[1]; +} wl_scan_results_t; + +typedef struct wl_rateset_args { + u32 count; /* # rates in this set */ + u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ + u8 mcs[MCSSET_LEN]; /* supported mcs index bit map */ +} wl_rateset_args_t; + +/* u32 list */ +typedef struct wl_u32_list { + /* in - # of elements, out - # of entries */ + u32 count; + /* variable length u32 list */ + u32 element[1]; +} wl_u32_list_t; + +/* used for association with a specific BSSID and chanspec list */ +typedef struct wl_assoc_params { + u8 bssid[ETH_ALEN]; /* 00:00:00:00:00:00: broadcast scan */ + s32 chanspec_num; /* 0: all available channels, + * otherwise count of chanspecs in chanspec_list + */ + chanspec_t chanspec_list[1]; /* list of chanspecs */ +} wl_assoc_params_t; +#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t)) + +/* used for reassociation/roam to a specific BSSID and channel */ +typedef wl_assoc_params_t wl_reassoc_params_t; +#define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE + +/* used for join with or without a specific bssid and channel list */ +typedef struct wl_join_params { + wlc_ssid_t ssid; + wl_assoc_params_t params; /* optional field, but it must include the fixed portion + * of the wl_assoc_params_t struct when it does present. + */ +} wl_join_params_t; +#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t)) + +/* size of wl_scan_results not including variable length array */ +#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t)) + +/* incremental scan results struct */ +typedef struct wl_iscan_results { + u32 status; + wl_scan_results_t results; +} wl_iscan_results_t; + +/* size of wl_iscan_results not including variable length array */ +#define WL_ISCAN_RESULTS_FIXED_SIZE \ + (WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results)) + +typedef struct { + u32 duration; /* millisecs spent sampling this channel */ + u32 congest_ibss; /* millisecs in our bss (presumably this traffic will */ + /* move if cur bss moves channels) */ + u32 congest_obss; /* traffic not in our bss */ + u32 interference; /* millisecs detecting a non 802.11 interferer. */ + u32 timestamp; /* second timestamp */ +} cca_congest_t; + +typedef struct { + chanspec_t chanspec; /* Which channel? */ + u8 num_secs; /* How many secs worth of data */ + cca_congest_t secs[1]; /* Data */ +} cca_congest_channel_req_t; + +typedef struct wl_country { + char country_abbrev[WLC_CNTRY_BUF_SZ]; /* nul-terminated country code used in + * the Country IE + */ + s32 rev; /* revision specifier for ccode + * on set, -1 indicates unspecified. + * on get, rev >= 0 + */ + char ccode[WLC_CNTRY_BUF_SZ]; /* nul-terminated built-in country code. + * variable length, but fixed size in + * struct allows simple allocation for + * expected country strings <= 3 chars. + */ +} wl_country_t; + +typedef struct wl_channels_in_country { + u32 buflen; + u32 band; + char country_abbrev[WLC_CNTRY_BUF_SZ]; + u32 count; + u32 channel[1]; +} wl_channels_in_country_t; + +typedef struct wl_country_list { + u32 buflen; + u32 band_set; + u32 band; + u32 count; + char country_abbrev[1]; +} wl_country_list_t; + +typedef struct wl_rm_req_elt { + s8 type; + s8 flags; + chanspec_t chanspec; + u32 token; /* token for this measurement */ + u32 tsf_h; /* TSF high 32-bits of Measurement start time */ + u32 tsf_l; /* TSF low 32-bits */ + u32 dur; /* TUs */ +} wl_rm_req_elt_t; + +typedef struct wl_rm_req { + u32 token; /* overall measurement set token */ + u32 count; /* number of measurement requests */ + void *cb; /* completion callback function: may be NULL */ + void *cb_arg; /* arg to completion callback function */ + wl_rm_req_elt_t req[1]; /* variable length block of requests */ +} wl_rm_req_t; +#define WL_RM_REQ_FIXED_LEN offsetof(wl_rm_req_t, req) + +typedef struct wl_rm_rep_elt { + s8 type; + s8 flags; + chanspec_t chanspec; + u32 token; /* token for this measurement */ + u32 tsf_h; /* TSF high 32-bits of Measurement start time */ + u32 tsf_l; /* TSF low 32-bits */ + u32 dur; /* TUs */ + u32 len; /* byte length of data block */ + u8 data[1]; /* variable length data block */ +} wl_rm_rep_elt_t; +#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ + +#define WL_RPI_REP_BIN_NUM 8 +typedef struct wl_rm_rpi_rep { + u8 rpi[WL_RPI_REP_BIN_NUM]; + s8 rpi_max[WL_RPI_REP_BIN_NUM]; +} wl_rm_rpi_rep_t; + +typedef struct wl_rm_rep { + u32 token; /* overall measurement set token */ + u32 len; /* length of measurement report block */ + wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ +} wl_rm_rep_t; +#define WL_RM_REP_FIXED_LEN 8 + +typedef struct wl_wsec_key { + u32 index; /* key index */ + u32 len; /* key length */ + u8 data[WLAN_MAX_KEY_LEN]; /* key data */ + u32 pad_1[18]; + u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ + u32 flags; /* misc flags */ + u32 pad_2[2]; + int pad_3; + int iv_initialized; /* has IV been initialized already? */ + int pad_4; + /* Rx IV */ + struct { + u32 hi; /* upper 32 bits of IV */ + u16 lo; /* lower 16 bits of IV */ + } rxiv; + u32 pad_5[2]; + u8 ea[ETH_ALEN]; /* per station */ +} wl_wsec_key_t; + +/* Used to get specific STA parameters */ +typedef struct { + u32 val; + u8 ea[ETH_ALEN]; +} scb_val_t; + +/* channel encoding */ +typedef struct channel_info { + int hw_channel; + int target_channel; + int scan_channel; +} channel_info_t; + +/* Linux network driver ioctl encoding */ +typedef struct wl_ioctl { + uint cmd; /* common ioctl definition */ + void *buf; /* pointer to user buffer */ + uint len; /* length of user buffer */ + u8 set; /* get or set request (optional) */ + uint used; /* bytes read or written (optional) */ + uint needed; /* bytes needed (optional) */ +} wl_ioctl_t; + /* Common structure for module and instance linkage */ typedef struct dhd_pub { /* Linkage ponters */ @@ -122,6 +584,20 @@ typedef struct dhd_pub { } dhd_pub_t; +typedef struct dhd_if_event { + u8 ifidx; + u8 action; + u8 flags; + u8 bssidx; +} dhd_if_event_t; + +typedef struct { + u32 limit; /* Expiration time (usec) */ + u32 increment; /* Current expiration increment (usec) */ + u32 elapsed; /* Current elapsed time (usec) */ + u32 tick; /* O/S tick time (usec) */ +} dhd_timeout_t; + #if defined(CONFIG_PM_SLEEP) extern atomic_t dhd_mmc_suspend; #define DHD_PM_RESUME_WAIT_INIT(a) DECLARE_WAIT_QUEUE_HEAD(a); @@ -167,7 +643,69 @@ extern atomic_t dhd_mmc_suspend; } while (0) #endif /* defined(CONFIG_PM_SLEEP) */ -#define DHD_IF_VIF 0x01 /* Virtual IF (Hidden from user) */ + +/* + * Insmod parameters for debug/test + */ + +/* Watchdog timer interval */ +extern uint dhd_watchdog_ms; + +#if defined(DHD_DEBUG) +/* Console output poll interval */ +extern uint dhd_console_ms; +#endif /* defined(DHD_DEBUG) */ + +/* Use interrupts */ +extern uint dhd_intr; + +/* Use polling */ +extern uint dhd_poll; + +/* ARP offload agent mode */ +extern uint dhd_arp_mode; + +/* ARP offload enable */ +extern uint dhd_arp_enable; + +/* Pkt filte enable control */ +extern uint dhd_pkt_filter_enable; + +/* Pkt filter init setup */ +extern uint dhd_pkt_filter_init; + +/* Pkt filter mode control */ +extern uint dhd_master_mode; + +/* Roaming mode control */ +extern uint dhd_roam; + +/* Roaming mode control */ +extern uint dhd_radio_up; + +/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */ +extern int dhd_idletime; +#define DHD_IDLETIME_TICKS 1 + +/* SDIO Drive Strength */ +extern uint dhd_sdiod_drive_strength; + +/* Override to force tx queueing all the time */ +extern uint dhd_force_tx_queueing; + +#ifdef SDTEST +/* Echo packet generator (SDIO), pkts/s */ +extern uint dhd_pktgen; + +/* Echo packet len (0 => sawtooth, max 1800) */ +extern uint dhd_pktgen_len; +#define MAX_PKTGEN_LEN 1800 +#endif + +extern char fw_path[MOD_PARAM_PATHLEN]; +extern char nv_path[MOD_PARAM_PATHLEN]; + +extern u32 g_assert_type; static inline void MUTEX_LOCK_INIT(dhd_pub_t *dhdp) { @@ -205,13 +743,6 @@ static inline void MUTEX_UNLOCK_WL_SCAN_SET(void) { } -typedef struct dhd_if_event { - u8 ifidx; - u8 action; - u8 flags; - u8 bssidx; -} dhd_if_event_t; - /* * Exported from dhd OS modules (dhd_linux/dhd_ndis) */ @@ -286,13 +817,6 @@ extern void dhd_os_sdtxunlock(dhd_pub_t *pub); int setScheduler(struct task_struct *p, int policy, struct sched_param *param); -typedef struct { - u32 limit; /* Expiration time (usec) */ - u32 increment; /* Current expiration increment (usec) */ - u32 elapsed; /* Current elapsed time (usec) */ - u32 tick; /* O/S tick time (usec) */ -} dhd_timeout_t; - extern void dhd_timeout_start(dhd_timeout_t *tmo, uint usec); extern int dhd_timeout_expired(dhd_timeout_t *tmo); @@ -324,85 +848,9 @@ extern int dhd_bus_devreset(dhd_pub_t *dhdp, u8 flag); extern uint dhd_bus_status(dhd_pub_t *dhdp); extern int dhd_bus_start(dhd_pub_t *dhdp); -enum cust_gpio_modes { - WLAN_RESET_ON, - WLAN_RESET_OFF, - WLAN_POWER_ON, - WLAN_POWER_OFF -}; -/* - * Insmod parameters for debug/test - */ - -/* Watchdog timer interval */ -extern uint dhd_watchdog_ms; - -#if defined(DHD_DEBUG) -/* Console output poll interval */ -extern uint dhd_console_ms; -#endif /* defined(DHD_DEBUG) */ - -/* Use interrupts */ -extern uint dhd_intr; - -/* Use polling */ -extern uint dhd_poll; - -/* ARP offload agent mode */ -extern uint dhd_arp_mode; - -/* ARP offload enable */ -extern uint dhd_arp_enable; - -/* Pkt filte enable control */ -extern uint dhd_pkt_filter_enable; - -/* Pkt filter init setup */ -extern uint dhd_pkt_filter_init; - -/* Pkt filter mode control */ -extern uint dhd_master_mode; - -/* Roaming mode control */ -extern uint dhd_roam; - -/* Roaming mode control */ -extern uint dhd_radio_up; - -/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */ -extern int dhd_idletime; -#define DHD_IDLETIME_TICKS 1 - -/* SDIO Drive Strength */ -extern uint dhd_sdiod_drive_strength; - -/* Override to force tx queueing all the time */ -extern uint dhd_force_tx_queueing; - -#ifdef SDTEST -/* Echo packet generator (SDIO), pkts/s */ -extern uint dhd_pktgen; - -/* Echo packet len (0 => sawtooth, max 1800) */ -extern uint dhd_pktgen_len; -#define MAX_PKTGEN_LEN 1800 -#endif - -/* optionally set by a module_param_string() */ -#define MOD_PARAM_PATHLEN 2048 -extern char fw_path[MOD_PARAM_PATHLEN]; -extern char nv_path[MOD_PARAM_PATHLEN]; - -/* For supporting multiple interfaces */ -#define DHD_MAX_IFS 16 -#define DHD_DEL_IF -0xe -#define DHD_BAD_IF -0xf - extern void dhd_wait_for_event(dhd_pub_t *dhd, bool * lockvar); extern void dhd_wait_event_wakeup(dhd_pub_t *dhd); -extern u32 g_assert_type; - #ifdef BCMDBG #define ASSERT(exp) \ do { if (!(exp)) osl_assert(#exp, __FILE__, __LINE__); } while (0) @@ -411,4 +859,84 @@ extern void osl_assert(char *exp, char *file, int line); #define ASSERT(exp) do {} while (0) #endif /* defined(BCMDBG) */ +/* Linux network driver ioctl encoding */ +typedef struct dhd_ioctl { + uint cmd; /* common ioctl definition */ + void *buf; /* pointer to user buffer */ + uint len; /* length of user buffer */ + bool set; /* get or set request (optional) */ + uint used; /* bytes read or written (optional) */ + uint needed; /* bytes needed (optional) */ + uint driver; /* to identify target driver */ +} dhd_ioctl_t; + +/* per-driver magic numbers */ +#define DHD_IOCTL_MAGIC 0x00444944 + +/* bump this number if you change the ioctl interface */ +#define DHD_IOCTL_VERSION 1 + +#define DHD_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ +#define DHD_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ + +/* common ioctl definitions */ +#define DHD_GET_MAGIC 0 +#define DHD_GET_VERSION 1 +#define DHD_GET_VAR 2 +#define DHD_SET_VAR 3 + +/* message levels */ +#define DHD_ERROR_VAL 0x0001 +#define DHD_TRACE_VAL 0x0002 +#define DHD_INFO_VAL 0x0004 +#define DHD_DATA_VAL 0x0008 +#define DHD_CTL_VAL 0x0010 +#define DHD_TIMER_VAL 0x0020 +#define DHD_HDRS_VAL 0x0040 +#define DHD_BYTES_VAL 0x0080 +#define DHD_INTR_VAL 0x0100 +#define DHD_LOG_VAL 0x0200 +#define DHD_GLOM_VAL 0x0400 +#define DHD_EVENT_VAL 0x0800 +#define DHD_BTA_VAL 0x1000 +#define DHD_ISCAN_VAL 0x2000 + +#ifdef SDTEST +/* For pktgen iovar */ +typedef struct dhd_pktgen { + uint version; /* To allow structure change tracking */ + uint freq; /* Max ticks between tx/rx attempts */ + uint count; /* Test packets to send/rcv each attempt */ + uint print; /* Print counts every attempts */ + uint total; /* Total packets (or bursts) */ + uint minlen; /* Minimum length of packets to send */ + uint maxlen; /* Maximum length of packets to send */ + uint numsent; /* Count of test packets sent */ + uint numrcvd; /* Count of test packets received */ + uint numfail; /* Count of test send failures */ + uint mode; /* Test mode (type of test packets) */ + uint stop; /* Stop after this many tx failures */ +} dhd_pktgen_t; + +/* Version in case structure changes */ +#define DHD_PKTGEN_VERSION 2 + +/* Type of test packets to use */ +#define DHD_PKTGEN_ECHO 1 /* Send echo requests */ +#define DHD_PKTGEN_SEND 2 /* Send discard packets */ +#define DHD_PKTGEN_RXBURST 3 /* Request dongle send N packets */ +#define DHD_PKTGEN_RECV 4 /* Continuous rx from continuous + tx dongle */ +#endif /* SDTEST */ + +/* Enter idle immediately (no timeout) */ +#define DHD_IDLE_IMMEDIATE (-1) + +/* Values for idleclock iovar: other values are the sd_divisor to use + when idle */ +#define DHD_IDLE_ACTIVE 0 /* Do not request any SD clock change + when idle */ +#define DHD_IDLE_STOP (-1) /* Request SD clock be stopped + (and use SD1 mode) */ + #endif /* _dhd_h_ */ diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_common.c b/drivers/staging/brcm80211/brcmfmac/dhd_common.c index 0bfb93c..5aa5ee4 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/staging/brcm80211/brcmfmac/dhd_common.c @@ -24,7 +24,6 @@ #include #include #include -#include int dhd_msg_level; char fw_path[MOD_PARAM_PATHLEN]; diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c index 1cf6c5d..abd41e3 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c +++ b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c @@ -20,7 +20,6 @@ #include #include -#include #include #define WL_ERROR(fmt, args...) printk(fmt, ##args) diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_proto.h b/drivers/staging/brcm80211/brcmfmac/dhd_proto.h index 030d5ff..16b8942 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhd_proto.h +++ b/drivers/staging/brcm80211/brcmfmac/dhd_proto.h @@ -18,7 +18,6 @@ #define _dhd_proto_h_ #include -#include #ifndef IOCTL_RESP_TIMEOUT #define IOCTL_RESP_TIMEOUT 2000 /* In milli second */ diff --git a/drivers/staging/brcm80211/brcmfmac/dhdioctl.h b/drivers/staging/brcm80211/brcmfmac/dhdioctl.h index f0ba535..db0b9e8 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhdioctl.h +++ b/drivers/staging/brcm80211/brcmfmac/dhdioctl.h @@ -17,84 +17,4 @@ #ifndef _dhdioctl_h_ #define _dhdioctl_h_ -/* Linux network driver ioctl encoding */ -typedef struct dhd_ioctl { - uint cmd; /* common ioctl definition */ - void *buf; /* pointer to user buffer */ - uint len; /* length of user buffer */ - bool set; /* get or set request (optional) */ - uint used; /* bytes read or written (optional) */ - uint needed; /* bytes needed (optional) */ - uint driver; /* to identify target driver */ -} dhd_ioctl_t; - -/* per-driver magic numbers */ -#define DHD_IOCTL_MAGIC 0x00444944 - -/* bump this number if you change the ioctl interface */ -#define DHD_IOCTL_VERSION 1 - -#define DHD_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */ -#define DHD_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ - -/* common ioctl definitions */ -#define DHD_GET_MAGIC 0 -#define DHD_GET_VERSION 1 -#define DHD_GET_VAR 2 -#define DHD_SET_VAR 3 - -/* message levels */ -#define DHD_ERROR_VAL 0x0001 -#define DHD_TRACE_VAL 0x0002 -#define DHD_INFO_VAL 0x0004 -#define DHD_DATA_VAL 0x0008 -#define DHD_CTL_VAL 0x0010 -#define DHD_TIMER_VAL 0x0020 -#define DHD_HDRS_VAL 0x0040 -#define DHD_BYTES_VAL 0x0080 -#define DHD_INTR_VAL 0x0100 -#define DHD_LOG_VAL 0x0200 -#define DHD_GLOM_VAL 0x0400 -#define DHD_EVENT_VAL 0x0800 -#define DHD_BTA_VAL 0x1000 -#define DHD_ISCAN_VAL 0x2000 - -#ifdef SDTEST -/* For pktgen iovar */ -typedef struct dhd_pktgen { - uint version; /* To allow structure change tracking */ - uint freq; /* Max ticks between tx/rx attempts */ - uint count; /* Test packets to send/rcv each attempt */ - uint print; /* Print counts every attempts */ - uint total; /* Total packets (or bursts) */ - uint minlen; /* Minimum length of packets to send */ - uint maxlen; /* Maximum length of packets to send */ - uint numsent; /* Count of test packets sent */ - uint numrcvd; /* Count of test packets received */ - uint numfail; /* Count of test send failures */ - uint mode; /* Test mode (type of test packets) */ - uint stop; /* Stop after this many tx failures */ -} dhd_pktgen_t; - -/* Version in case structure changes */ -#define DHD_PKTGEN_VERSION 2 - -/* Type of test packets to use */ -#define DHD_PKTGEN_ECHO 1 /* Send echo requests */ -#define DHD_PKTGEN_SEND 2 /* Send discard packets */ -#define DHD_PKTGEN_RXBURST 3 /* Request dongle send N packets */ -#define DHD_PKTGEN_RECV 4 /* Continuous rx from continuous - tx dongle */ -#endif /* SDTEST */ - -/* Enter idle immediately (no timeout) */ -#define DHD_IDLE_IMMEDIATE (-1) - -/* Values for idleclock iovar: other values are the sd_divisor to use - when idle */ -#define DHD_IDLE_ACTIVE 0 /* Do not request any SD clock change - when idle */ -#define DHD_IDLE_STOP (-1) /* Request SD clock be stopped - (and use SD1 mode) */ - #endif /* _dhdioctl_h_ */ diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c index 945e039..fa005d3 100644 --- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h index 996033c..4bd0392 100644 --- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h @@ -20,7 +20,6 @@ #include #include #include -#include struct wl_conf; struct wl_iface; diff --git a/drivers/staging/brcm80211/brcmfmac/wl_iw.c b/drivers/staging/brcm80211/brcmfmac/wl_iw.c index 929ceaf..b284b12 100644 --- a/drivers/staging/brcm80211/brcmfmac/wl_iw.c +++ b/drivers/staging/brcm80211/brcmfmac/wl_iw.c @@ -18,7 +18,6 @@ #include #include #include -#include #include @@ -30,7 +29,6 @@ #include #include typedef const struct si_pub si_t; -#include #include #include @@ -115,6 +113,24 @@ typedef struct iscan_info { } iscan_info_t; iscan_info_t *g_iscan; +typedef enum sup_auth_status { + WLC_SUP_DISCONNECTED = 0, + WLC_SUP_CONNECTING, + WLC_SUP_IDREQUIRED, + WLC_SUP_AUTHENTICATING, + WLC_SUP_AUTHENTICATED, + WLC_SUP_KEYXCHANGE, + WLC_SUP_KEYED, + WLC_SUP_TIMEOUT, + WLC_SUP_LAST_BASIC_STATE, + WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED, + WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE, + WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE, + WLC_SUP_KEYXCHANGE_PREP_M4, + WLC_SUP_KEYXCHANGE_WAIT_G1, + WLC_SUP_KEYXCHANGE_PREP_G2 +} sup_auth_status_t; + static const u8 ether_bcast[ETH_ALEN] = {255, 255, 255, 255, 255, 255}; /* Global ASSERT type flag */ diff --git a/drivers/staging/brcm80211/brcmfmac/wl_iw.h b/drivers/staging/brcm80211/brcmfmac/wl_iw.h index fe06174..c92a8b5 100644 --- a/drivers/staging/brcm80211/brcmfmac/wl_iw.h +++ b/drivers/staging/brcm80211/brcmfmac/wl_iw.h @@ -19,8 +19,6 @@ #include -#include - #define WL_SCAN_PARAMS_SSID_MAX 10 #define GET_SSID "SSID=" #define GET_CHANNEL "CH=" diff --git a/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h b/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h index f4b3e61..a41e62c 100644 --- a/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h +++ b/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h @@ -17,8 +17,6 @@ #ifndef _bcmsrom_tbl_h_ #define _bcmsrom_tbl_h_ -#include "wlioctl.h" - typedef struct { const char *name; u32 revmask; diff --git a/drivers/staging/brcm80211/brcmsmac/d11.h b/drivers/staging/brcm80211/brcmsmac/d11.h index d91e418..cb434e5 100644 --- a/drivers/staging/brcm80211/brcmsmac/d11.h +++ b/drivers/staging/brcm80211/brcmsmac/d11.h @@ -17,14 +17,9 @@ #ifndef _D11_H #define _D11_H +#include #include -#ifndef WL_RSSI_ANT_MAX -#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ -#elif WL_RSSI_ANT_MAX != 4 -#error "WL_RSSI_ANT_MAX does not match" -#endif - /* cpp contortions to concatenate w/arg prescan */ #ifndef PAD #define _PADLINE(line) pad ## line @@ -56,6 +51,12 @@ #define TX_DATA_FIFO TX_AC_BE_FIFO #define TX_CTL_FIFO TX_AC_VO_FIFO +#ifndef WL_RSSI_ANT_MAX +#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ +#elif WL_RSSI_ANT_MAX != 4 +#error "WL_RSSI_ANT_MAX does not match" +#endif + typedef volatile struct { u32 intstatus; u32 intmask; diff --git a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h index 1ef96c7..93e3db9 100644 --- a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h +++ b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h @@ -14,14 +14,18 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +/* + * wlc_phy_hal.h: functionality exported from the phy to higher layers + */ + #ifndef _wlc_phy_h_ #define _wlc_phy_h_ -#include #include #include #include #include /* struct wiphy */ +#include "bcmwifi.h" /* chanspec_t */ #define IDCODE_VER_MASK 0x0000000f #define IDCODE_VER_SHIFT 0 @@ -87,12 +91,20 @@ #define WLC_TXPWR_DB_FACTOR 4 +/* a large TX Power as an init value to factor out of min() calculations, + * keep low enough to fit in an s8, units are .25 dBm + */ +#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */ + #define WLC_NUM_RATES_CCK 4 #define WLC_NUM_RATES_OFDM 8 #define WLC_NUM_RATES_MCS_1_STREAM 8 #define WLC_NUM_RATES_MCS_2_STREAM 8 #define WLC_NUM_RATES_MCS_3_STREAM 8 #define WLC_NUM_RATES_MCS_4_STREAM 8 + +#define WLC_RSSI_INVALID 0 /* invalid RSSI value */ + typedef struct txpwr_limits { u8 cck[WLC_NUM_RATES_CCK]; u8 ofdm[WLC_NUM_RATES_OFDM]; @@ -115,6 +127,32 @@ typedef struct txpwr_limits { } txpwr_limits_t; typedef struct { + u32 flags; + chanspec_t chanspec; /* txpwr report for this channel */ + chanspec_t local_chanspec; /* channel on which we are associated */ + u8 local_max; /* local max according to the AP */ + u8 local_constraint; /* local constraint according to the AP */ + s8 antgain[2]; /* Ant gain for each band - from SROM */ + u8 rf_cores; /* count of RF Cores being reported */ + u8 est_Pout[4]; /* Latest tx power out estimate per RF chain */ + u8 est_Pout_act[4]; /* Latest tx power out estimate per RF chain + * without adjustment + */ + u8 est_Pout_cck; /* Latest CCK tx power out estimate */ + u8 tx_power_max[4]; /* Maximum target power among all rates */ + u8 tx_power_max_rate_ind[4]; /* Index of the rate with the max target power */ + u8 user_limit[WL_TX_POWER_RATES]; /* User limit */ + u8 reg_limit[WL_TX_POWER_RATES]; /* Regulatory power limit */ + u8 board_limit[WL_TX_POWER_RATES]; /* Max power board can support (SROM) */ + u8 target[WL_TX_POWER_RATES]; /* Latest target power */ +} tx_power_t; + +typedef struct tx_inst_power { + u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */ + u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */ +} tx_inst_power_t; + +typedef struct { u8 vec[MAXCHANNEL / NBBY]; } chanvec_t; diff --git a/drivers/staging/brcm80211/brcmsmac/wl_dbg.h b/drivers/staging/brcm80211/brcmsmac/wl_dbg.h index 5582de3..8cc6b1a 100644 --- a/drivers/staging/brcm80211/brcmsmac/wl_dbg.h +++ b/drivers/staging/brcm80211/brcmsmac/wl_dbg.h @@ -19,7 +19,7 @@ #include /* dev_err() */ -/* wl_msg_level is a bit vector with defs in wlioctl.h */ +/* wl_msg_level is a bit vector with defs in bcmdefs.h */ extern u32 wl_msg_level; #define BCMMSG(dev, fmt, args...) \ diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c index f951f22..105f426 100644 --- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c +++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include "phy/wlc_phy_int.h" diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h index c878690..fafde6a 100644 --- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h +++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h @@ -17,6 +17,10 @@ #ifndef _wl_mac80211_h_ #define _wl_mac80211_h_ +/* softmac ioctl definitions */ +#define WLC_SET_SHORTSLOT_OVERRIDE 146 + + /* BMAC Note: High-only driver is no longer working in softirq context as it needs to block and * sleep so perimeter lock has to be a semaphore instead of spinlock. This requires timers to be * submitted to workqueue instead of being on kernel timer diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c b/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c index 3c4b2c0..3b04e02 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include "d11.h" diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c index 75343ab..c83896b 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c index 111ef32..efdc62a 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c @@ -26,7 +26,6 @@ #include #include #include -#include #include "d11.h" #include "wlc_rate.h" @@ -39,9 +38,15 @@ #include "wlc_channel.h" #include "wlc_main.h" #include "wl_export.h" -#include "wlc_phy_shim.h" #include "wlc_antsel.h" +#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */ +#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */ +#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */ +#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */ +#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */ +#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */ + /* useful macros */ #define WLC_ANTSEL_11N_0(ant) ((((ant) & ANT_SELCFG_MASK) >> 4) & 0xf) #define WLC_ANTSEL_11N_1(ant) (((ant) & ANT_SELCFG_MASK) & 0xf) diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c index 9ef7707..adc06fc 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -45,7 +44,6 @@ #include "wlc_scb.h" #include "wlc_pub.h" #include "wlc_key.h" -#include "wlc_phy_shim.h" #include "phy/wlc_phy_hal.h" #include "wlc_channel.h" #include "wlc_main.h" diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_channel.c b/drivers/staging/brcm80211/brcmsmac/wlc_channel.c index a3a2bf9..9e29339 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_channel.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_channel.c @@ -24,7 +24,6 @@ #include #include #include -#include #include "wlc_types.h" #include "d11.h" diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_key.h b/drivers/staging/brcm80211/brcmsmac/wlc_key.h index cab10c7..f4bced5 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_key.h +++ b/drivers/staging/brcm80211/brcmsmac/wlc_key.h @@ -17,6 +17,8 @@ #ifndef _wlc_key_h_ #define _wlc_key_h_ +#include /* for ETH_ALEN */ + struct scb; struct wlc_info; struct wlc_bsscfg; diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_main.c b/drivers/staging/brcm80211/brcmsmac/wlc_main.c index c1257d4..0837e8d 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_main.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_main.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include @@ -45,14 +44,12 @@ #include "wlc_main.h" #include "wlc_bmac.h" #include "wlc_phy_hal.h" -#include "wlc_phy_shim.h" #include "wlc_antsel.h" #include "wlc_stf.h" #include "wlc_ampdu.h" #include "wl_export.h" #include "wlc_alloc.h" #include "wl_dbg.h" - #include "wl_mac80211.h" /* @@ -93,6 +90,30 @@ #define TBTT_ALIGN_LEEWAY_US 100 /* min leeway before first TBTT in us */ +/* Software feature flag defines used by wlfeatureflag */ +#define WL_SWFL_NOHWRADIO 0x0004 +#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */ +#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */ + +/* n-mode support capability */ +/* 2x2 includes both 1x1 & 2x2 devices + * reserved #define 2 for future when we want to separate 1x1 & 2x2 and + * control it independently + */ +#define WL_11N_2x2 1 +#define WL_11N_3x3 3 +#define WL_11N_4x4 4 + +/* define 11n feature disable flags */ +#define WLFEATURE_DISABLE_11N 0x00000001 +#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002 +#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004 +#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008 +#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010 +#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020 +#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040 +#define WLFEATURE_DISABLE_11N_GF 0x00000080 + /* * driver maintains internal 'tick'(wlc->pub->now) which increments in 1s OS timer(soft * watchdog) it is not a wall clock and won't increment when driver is in "down" state @@ -2428,7 +2449,6 @@ _wlc_ioctl(struct wlc_info *wlc, int cmd, void *arg, int len, struct scb *nextscb; bool ta_ok; uint band; - rw_reg_t *r; struct wlc_bsscfg *bsscfg; wlc_bss_info_t *current_bss; @@ -2440,7 +2460,6 @@ _wlc_ioctl(struct wlc_info *wlc, int cmd, void *arg, int len, nextscb = NULL; ta_ok = false; band = 0; - r = NULL; /* If the device is turned off, then it's not "removed" */ if (!wlc->pub->hw_off && DEVICEREMOVED(wlc)) { diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_main.h b/drivers/staging/brcm80211/brcmsmac/wlc_main.h index edbf3d2..3bbb774 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_main.h +++ b/drivers/staging/brcm80211/brcmsmac/wlc_main.h @@ -290,7 +290,7 @@ struct wlcband { wlc_phy_t *pi; /* pointer to phy specific information */ bool abgphy_encore; - u8 gmode; /* currently active gmode (see wlioctl.h) */ + u8 gmode; /* currently active gmode */ struct scb *hwrs_scb; /* permanent scb for hw rateset */ diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c index 16fea02..c33b61b 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h index c151a5d..124d3fb 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h +++ b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h @@ -14,6 +14,10 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +/* + * wlc_phy_shim.h: stuff defined in wlc_phy_shim.c and included only by the phy + */ + #ifndef _wlc_phy_shim_h_ #define _wlc_phy_shim_h_ @@ -51,6 +55,57 @@ #define ANT_RX_DIV_ENABLE 3 /* APHY bbConfig Enable RX Diversity */ #define ANT_RX_DIV_DEF ANT_RX_DIV_START_0 /* default antdiv setting */ +#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */ +#define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */ +#define WL_ANT_IDX_1 0 /* antenna index 1 */ +#define WL_ANT_IDX_2 1 /* antenna index 2 */ + +/* values for n_preamble_type */ +#define WLC_N_PREAMBLE_MIXEDMODE 0 +#define WLC_N_PREAMBLE_GF 1 +#define WLC_N_PREAMBLE_GF_BRCM 2 + +#define WL_TX_POWER_RATES_LEGACY 45 +#define WL_TX_POWER_MCS20_FIRST 12 +#define WL_TX_POWER_MCS20_NUM 16 +#define WL_TX_POWER_MCS40_FIRST 28 +#define WL_TX_POWER_MCS40_NUM 17 + + +#define WL_TX_POWER_RATES 101 +#define WL_TX_POWER_CCK_FIRST 0 +#define WL_TX_POWER_CCK_NUM 4 +#define WL_TX_POWER_OFDM_FIRST 4 /* Index for first 20MHz OFDM SISO rate */ +#define WL_TX_POWER_OFDM20_CDD_FIRST 12 /* Index for first 20MHz OFDM CDD rate */ +#define WL_TX_POWER_OFDM40_SISO_FIRST 52 /* Index for first 40MHz OFDM SISO rate */ +#define WL_TX_POWER_OFDM40_CDD_FIRST 60 /* Index for first 40MHz OFDM CDD rate */ +#define WL_TX_POWER_OFDM_NUM 8 +#define WL_TX_POWER_MCS20_SISO_FIRST 20 /* Index for first 20MHz MCS SISO rate */ +#define WL_TX_POWER_MCS20_CDD_FIRST 28 /* Index for first 20MHz MCS CDD rate */ +#define WL_TX_POWER_MCS20_STBC_FIRST 36 /* Index for first 20MHz MCS STBC rate */ +#define WL_TX_POWER_MCS20_SDM_FIRST 44 /* Index for first 20MHz MCS SDM rate */ +#define WL_TX_POWER_MCS40_SISO_FIRST 68 /* Index for first 40MHz MCS SISO rate */ +#define WL_TX_POWER_MCS40_CDD_FIRST 76 /* Index for first 40MHz MCS CDD rate */ +#define WL_TX_POWER_MCS40_STBC_FIRST 84 /* Index for first 40MHz MCS STBC rate */ +#define WL_TX_POWER_MCS40_SDM_FIRST 92 /* Index for first 40MHz MCS SDM rate */ +#define WL_TX_POWER_MCS_1_STREAM_NUM 8 +#define WL_TX_POWER_MCS_2_STREAM_NUM 8 +#define WL_TX_POWER_MCS_32 100 /* Index for 40MHz rate MCS 32 */ +#define WL_TX_POWER_MCS_32_NUM 1 + +/* sslpnphy specifics */ +#define WL_TX_POWER_MCS20_SISO_FIRST_SSN 12 /* Index for first 20MHz MCS SISO rate */ + +/* tx_power_t.flags bits */ +#define WL_TX_POWER_F_ENABLED 1 +#define WL_TX_POWER_F_HW 2 +#define WL_TX_POWER_F_MIMO 4 +#define WL_TX_POWER_F_SISO 8 + +/* values to force tx/rx chain */ +#define WLC_N_TXRX_CHAIN0 0 +#define WLC_N_TXRX_CHAIN1 1 + /* Forward declarations */ struct wlc_hw_info; typedef struct wlc_phy_shim_info wlc_phy_shim_info_t; diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_pub.h b/drivers/staging/brcm80211/brcmsmac/wlc_pub.h index b3a79ab..2bbf995 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_pub.h +++ b/drivers/staging/brcm80211/brcmsmac/wlc_pub.h @@ -17,6 +17,9 @@ #ifndef _wlc_pub_h_ #define _wlc_pub_h_ +#include "proto/802.11.h" /* for MCSSET_LEN */ +#include "bcmwifi.h" /* for chanspec_t */ + #define WLC_NUMRATES 16 /* max # of rates in a rateset */ #define MAXMULTILIST 32 /* max # multicast addresses */ #define D11_PHY_HDR_LEN 6 /* Phy header length - 6 bytes */ @@ -96,6 +99,12 @@ #define AIDMAPSZ (roundup(MAXSCB, NBBY)/NBBY) /* aid bitmap size in bytes */ #endif /* AIDMAPSZ */ +#define MAX_STREAMS_SUPPORTED 4 /* max number of streams supported */ + +#define WL_SPURAVOID_OFF 0 +#define WL_SPURAVOID_ON1 1 +#define WL_SPURAVOID_ON2 2 + struct ieee80211_tx_queue_params; typedef struct wlc_tunables { @@ -151,7 +160,7 @@ struct rsn_parms { IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD |\ IEEE80211_HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40) -/* wlc internal bss_info, wl external one is in wlioctl.h */ +/* wlc internal bss_info */ typedef struct wlc_bss_info { u8 BSSID[ETH_ALEN]; /* network BSSID */ u16 flags; /* flags for internal attributes */ @@ -489,6 +498,98 @@ extern const u8 wme_fifo2ac[]; #define WLC_PROT_N_PAM_OVR 15 /* n preamble override */ #define WLC_PROT_N_OBSS 16 /* non-HT OBSS present */ +/* + * 54g modes (basic bits may still be overridden) + * + * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11 + * Preamble: Long + * Shortslot: Off + * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 + * Extended Rateset: 6, 9, 12, 48 + * Preamble: Long + * Shortslot: Auto + * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 + * Extended Rateset: 6b, 9, 12b, 48 + * Preamble: Short required + * Shortslot: Auto + * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 + * Extended Rateset: 6, 9, 12, 48 + * Preamble: Long + * Shortslot: On + * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 + * Preamble: Short required + * Shortslot: On and required + * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b + * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 + * Preamble: Long + * Shortslot: Auto + */ +#define GMODE_LEGACY_B 0 +#define GMODE_AUTO 1 +#define GMODE_ONLY 2 +#define GMODE_B_DEFERRED 3 +#define GMODE_PERFORMANCE 4 +#define GMODE_LRS 5 +#define GMODE_MAX 6 + +/* values for PLCPHdr_override */ +#define WLC_PLCP_AUTO -1 +#define WLC_PLCP_SHORT 0 +#define WLC_PLCP_LONG 1 + +/* values for g_protection_override and n_protection_override */ +#define WLC_PROTECTION_AUTO -1 +#define WLC_PROTECTION_OFF 0 +#define WLC_PROTECTION_ON 1 +#define WLC_PROTECTION_MMHDR_ONLY 2 +#define WLC_PROTECTION_CTS_ONLY 3 + +/* values for g_protection_control and n_protection_control */ +#define WLC_PROTECTION_CTL_OFF 0 +#define WLC_PROTECTION_CTL_LOCAL 1 +#define WLC_PROTECTION_CTL_OVERLAP 2 + +/* values for n_protection */ +#define WLC_N_PROTECTION_OFF 0 +#define WLC_N_PROTECTION_OPTIONAL 1 +#define WLC_N_PROTECTION_20IN40 2 +#define WLC_N_PROTECTION_MIXEDMODE 3 + +/* values for band specific 40MHz capabilities */ +#define WLC_N_BW_20ALL 0 +#define WLC_N_BW_40ALL 1 +#define WLC_N_BW_20IN2G_40IN5G 2 + +/* bitflags for SGI support (sgi_rx iovar) */ +#define WLC_N_SGI_20 0x01 +#define WLC_N_SGI_40 0x02 + +/* defines used by the nrate iovar */ +#define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ +#define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ +#define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ +#define NRATE_STF_SHIFT 8 /* stf mode shift */ +#define NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */ +#define NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */ +#define NRATE_SGI_MASK 0x00800000 /* sgi mode */ +#define NRATE_SGI_SHIFT 23 /* sgi mode */ +#define NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */ +#define NRATE_LDPC_SHIFT 22 /* ldpc shift */ + +#define NRATE_STF_SISO 0 /* stf mode SISO */ +#define NRATE_STF_CDD 1 /* stf mode CDD */ +#define NRATE_STF_STBC 2 /* stf mode STBC */ +#define NRATE_STF_SDM 3 /* stf mode SDM */ + +#define ANT_SELCFG_MAX 4 /* max number of antenna configurations */ + +#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */ + +typedef struct { + u8 ant_config[ANT_SELCFG_MAX]; /* antenna configuration */ + u8 num_antcfg; /* number of available antenna configurations */ +} wlc_antselcfg_t; + /* common functions for every port */ extern void *wlc_attach(struct wl_info *wl, u16 vendor, u16 device, uint unit, bool piomode, void *regsva, uint bustype, void *btparam, diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c index 87b252d..6c9574a 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include "wlc_types.h" diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_scb.h b/drivers/staging/brcm80211/brcmsmac/wlc_scb.h index f07a891..fd7767c 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_scb.h +++ b/drivers/staging/brcm80211/brcmsmac/wlc_scb.h @@ -17,6 +17,8 @@ #ifndef _wlc_scb_h_ #define _wlc_scb_h_ +#include /* for ETH_ALEN */ + #define AMPDU_TX_BA_MAX_WSIZE 64 /* max Tx ba window size (in pdu) */ /* structure to store per-tid state for the ampdu initiator */ typedef struct scb_ampdu_tid_ini { diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_stf.c b/drivers/staging/brcm80211/brcmsmac/wlc_stf.c index 544d883..ca1b8aa 100644 --- a/drivers/staging/brcm80211/brcmsmac/wlc_stf.c +++ b/drivers/staging/brcm80211/brcmsmac/wlc_stf.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/staging/brcm80211/include/bcmdefs.h b/drivers/staging/brcm80211/include/bcmdefs.h index 55631f3..6500547 100644 --- a/drivers/staging/brcm80211/include/bcmdefs.h +++ b/drivers/staging/brcm80211/include/bcmdefs.h @@ -147,4 +147,56 @@ typedef struct { struct wl_info; struct wlc_bsscfg; +#define WL_NUMRATES 16 /* max # of rates in a rateset */ +typedef struct wl_rateset { + u32 count; /* # rates in this set */ + u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ +} wl_rateset_t; + +#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NUL */ + +#define WLC_SET_CHANNEL 30 +#define WLC_SET_SRL 32 +#define WLC_SET_LRL 34 + +#define WLC_SET_RATESET 72 +#define WLC_SET_BCNPRD 76 +#define WLC_GET_CURR_RATESET 114 /* current rateset */ +#define WLC_GET_PHYLIST 180 + +/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ +#define WL_RADIO_SW_DISABLE (1<<0) +#define WL_RADIO_HW_DISABLE (1<<1) +#define WL_RADIO_MPC_DISABLE (1<<2) +#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ + +/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ +#define WL_TXPWR_OVERRIDE (1U<<31) + +/* band types */ +#define WLC_BAND_AUTO 0 /* auto-select */ +#define WLC_BAND_5G 1 /* 5 Ghz */ +#define WLC_BAND_2G 2 /* 2.4 Ghz */ +#define WLC_BAND_ALL 3 /* all bands */ + +/* Values for PM */ +#define PM_OFF 0 +#define PM_MAX 1 + +/* Message levels */ +#define WL_ERROR_VAL 0x00000001 +#define WL_TRACE_VAL 0x00000002 + +#define NFIFO 6 /* # tx/rx fifopairs */ + +#define PM_OFF 0 +#define PM_MAX 1 +#define PM_FAST 2 + +/* band range returned by band_range iovar */ +#define WL_CHAN_FREQ_RANGE_2G 0 +#define WL_CHAN_FREQ_RANGE_5GL 1 +#define WL_CHAN_FREQ_RANGE_5GM 2 +#define WL_CHAN_FREQ_RANGE_5GH 3 + #endif /* _bcmdefs_h_ */ diff --git a/drivers/staging/brcm80211/include/bcmwifi.h b/drivers/staging/brcm80211/include/bcmwifi.h index a573ebf..f0dc6f8 100644 --- a/drivers/staging/brcm80211/include/bcmwifi.h +++ b/drivers/staging/brcm80211/include/bcmwifi.h @@ -17,6 +17,9 @@ #ifndef _bcmwifi_h_ #define _bcmwifi_h_ +#include /* for ETH_ALEN */ +#include /* for WLAN_PMKID_LEN */ + /* A chanspec holds the channel number, band, bandwidth and control sideband */ typedef u16 chanspec_t; @@ -164,4 +167,59 @@ extern u8 bcm_chspec_ctlchan(chanspec_t chspec); */ extern int bcm_mhz2channel(uint freq, uint start_factor); +/* Enumerate crypto algorithms */ +#define CRYPTO_ALGO_OFF 0 +#define CRYPTO_ALGO_WEP1 1 +#define CRYPTO_ALGO_TKIP 2 +#define CRYPTO_ALGO_WEP128 3 +#define CRYPTO_ALGO_AES_CCM 4 +#define CRYPTO_ALGO_AES_RESERVED1 5 +#define CRYPTO_ALGO_AES_RESERVED2 6 +#define CRYPTO_ALGO_NALG 7 + +/* wireless security bitvec */ +#define WEP_ENABLED 0x0001 +#define TKIP_ENABLED 0x0002 +#define AES_ENABLED 0x0004 +#define WSEC_SWFLAG 0x0008 +#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ + +/* WPA authentication mode bitvec */ +#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ +#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ +#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ +#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ +#define WPA_AUTH_RESERVED1 0x0008 +#define WPA_AUTH_RESERVED2 0x0010 + /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */ +#define WPA2_AUTH_RESERVED1 0x0020 +#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ +#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ +#define WPA2_AUTH_RESERVED3 0x0200 +#define WPA2_AUTH_RESERVED4 0x0400 +#define WPA2_AUTH_RESERVED5 0x0800 + +/* pmkid */ +#define MAXPMKID 16 + +typedef struct _pmkid { + u8 BSSID[ETH_ALEN]; + u8 PMKID[WLAN_PMKID_LEN]; +} pmkid_t; + +typedef struct _pmkid_list { + u32 npmkid; + pmkid_t pmkid[1]; +} pmkid_list_t; + +typedef struct _pmkid_cand { + u8 BSSID[ETH_ALEN]; + u8 preauth; +} pmkid_cand_t; + +typedef struct _pmkid_cand_list { + u32 npmkid_cand; + pmkid_cand_t pmkid_cand[1]; +} pmkid_cand_list_t; + #endif /* _bcmwifi_h_ */ diff --git a/drivers/staging/brcm80211/include/wlioctl.h b/drivers/staging/brcm80211/include/wlioctl.h index 2876bd9..281ca70 100644 --- a/drivers/staging/brcm80211/include/wlioctl.h +++ b/drivers/staging/brcm80211/include/wlioctl.h @@ -17,1349 +17,4 @@ #ifndef _wlioctl_h_ #define _wlioctl_h_ -#include -#ifdef BRCM_FULLMAC -#include -#endif -#include -#include -#include - -#ifndef INTF_NAME_SIZ -#define INTF_NAME_SIZ 16 -#endif - -#ifdef BRCM_FULLMAC - -#define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */ - -/* BSS info structure - * Applications MUST CHECK ie_offset field and length field to access IEs and - * next bss_info structure in a vector (in wl_scan_results_t) - */ -typedef struct wl_bss_info { - u32 version; /* version field */ - u32 length; /* byte length of data in this record, - * starting at version and including IEs - */ - u8 BSSID[ETH_ALEN]; - u16 beacon_period; /* units are Kusec */ - u16 capability; /* Capability information */ - u8 SSID_len; - u8 SSID[32]; - struct { - uint count; /* # rates in this set */ - u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ - } rateset; /* supported rates */ - chanspec_t chanspec; /* chanspec for bss */ - u16 atim_window; /* units are Kusec */ - u8 dtim_period; /* DTIM period */ - s16 RSSI; /* receive signal strength (in dBm) */ - s8 phy_noise; /* noise (in dBm) */ - - u8 n_cap; /* BSS is 802.11N Capable */ - u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */ - u8 ctl_ch; /* 802.11N BSS control channel number */ - u32 reserved32[1]; /* Reserved for expansion of BSS properties */ - u8 flags; /* flags */ - u8 reserved[3]; /* Reserved for expansion of BSS properties */ - u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ - - u16 ie_offset; /* offset at which IEs start, from beginning */ - u32 ie_length; /* byte length of Information Elements */ - s16 SNR; /* average SNR of during frame reception */ - /* Add new fields here */ - /* variable length Information Elements */ -} wl_bss_info_t; -#endif /* BRCM_FULLMAC */ - -typedef struct wlc_ssid { - u32 SSID_len; - unsigned char SSID[32]; -} wlc_ssid_t; - -#ifdef BRCM_FULLMAC -typedef struct chan_scandata { - u8 txpower; - u8 pad; - chanspec_t channel; /* Channel num, bw, ctrl_sb and band */ - u32 channel_mintime; - u32 channel_maxtime; -} chan_scandata_t; - -typedef enum wl_scan_type { - EXTDSCAN_FOREGROUND_SCAN, - EXTDSCAN_BACKGROUND_SCAN, - EXTDSCAN_FORCEDBACKGROUND_SCAN -} wl_scan_type_t; - -#define WLC_EXTDSCAN_MAX_SSID 5 - -#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */ -#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */ -#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info was received on channel (vs offchannel) */ - -typedef struct wl_extdscan_params { - s8 nprobes; /* 0, passive, otherwise active */ - s8 split_scan; /* split scan */ - s8 band; /* band */ - s8 pad; - wlc_ssid_t ssid[WLC_EXTDSCAN_MAX_SSID]; /* ssid list */ - u32 tx_rate; /* in 500ksec units */ - wl_scan_type_t scan_type; /* enum */ - s32 channel_num; - chan_scandata_t channel_list[1]; /* list of chandata structs */ -} wl_extdscan_params_t; - -#define WL_EXTDSCAN_PARAMS_FIXED_SIZE (sizeof(wl_extdscan_params_t) - sizeof(chan_scandata_t)) - -#define WL_BSSTYPE_INFRA 1 -#define WL_BSSTYPE_INDEP 0 -#define WL_BSSTYPE_ANY 2 - -/* Bitmask for scan_type */ -#define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */ -#define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */ -#define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */ - -typedef struct wl_scan_params { - wlc_ssid_t ssid; /* default: {0, ""} */ - u8 bssid[ETH_ALEN]; /* default: bcast */ - s8 bss_type; /* default: any, - * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT - */ - u8 scan_type; /* flags, 0 use default */ - s32 nprobes; /* -1 use default, number of probes per channel */ - s32 active_time; /* -1 use default, dwell time per channel for - * active scanning - */ - s32 passive_time; /* -1 use default, dwell time per channel - * for passive scanning - */ - s32 home_time; /* -1 use default, dwell time for the home channel - * between channel scans - */ - s32 channel_num; /* count of channels and ssids that follow - * - * low half is count of channels in channel_list, 0 - * means default (use all available channels) - * - * high half is entries in wlc_ssid_t array that - * follows channel_list, aligned for s32 (4 bytes) - * meaning an odd channel count implies a 2-byte pad - * between end of channel_list and first ssid - * - * if ssid count is zero, single ssid in the fixed - * parameter portion is assumed, otherwise ssid in - * the fixed portion is ignored - */ - u16 channel_list[1]; /* list of chanspecs */ -} wl_scan_params_t; - -/* size of wl_scan_params not including variable length array */ -#define WL_SCAN_PARAMS_FIXED_SIZE 64 - -/* masks for channel and ssid count */ -#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff -#define WL_SCAN_PARAMS_NSSID_SHIFT 16 - -#define WL_SCAN_ACTION_START 1 -#define WL_SCAN_ACTION_CONTINUE 2 -#define WL_SCAN_ACTION_ABORT 3 - -#define ISCAN_REQ_VERSION 1 - -/* incremental scan struct */ -typedef struct wl_iscan_params { - u32 version; - u16 action; - u16 scan_duration; - wl_scan_params_t params; -} wl_iscan_params_t; - -/* 3 fields + size of wl_scan_params, not including variable length array */ -#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t)) - -typedef struct wl_scan_results { - u32 buflen; - u32 version; - u32 count; - wl_bss_info_t bss_info[1]; -} wl_scan_results_t; - -/* size of wl_scan_results not including variable length array */ -#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t)) - -/* wl_iscan_results status values */ -#define WL_SCAN_RESULTS_SUCCESS 0 -#define WL_SCAN_RESULTS_PARTIAL 1 -#define WL_SCAN_RESULTS_PENDING 2 -#define WL_SCAN_RESULTS_ABORTED 3 -#define WL_SCAN_RESULTS_NO_MEM 4 - -#define ESCAN_REQ_VERSION 1 - -typedef struct wl_escan_params { - u32 version; - u16 action; - u16 sync_id; - wl_scan_params_t params; -} wl_escan_params_t; - -#define WL_ESCAN_PARAMS_FIXED_SIZE (offsetof(wl_escan_params_t, params) + sizeof(wlc_ssid_t)) - -typedef struct wl_escan_result { - u32 buflen; - u32 version; - u16 sync_id; - u16 bss_count; - wl_bss_info_t bss_info[1]; -} wl_escan_result_t; - -#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(wl_escan_result_t) - sizeof(wl_bss_info_t)) - -/* incremental scan results struct */ -typedef struct wl_iscan_results { - u32 status; - wl_scan_results_t results; -} wl_iscan_results_t; - -/* size of wl_iscan_results not including variable length array */ -#define WL_ISCAN_RESULTS_FIXED_SIZE \ - (WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results)) - -typedef struct wl_probe_params { - wlc_ssid_t ssid; - u8 bssid[ETH_ALEN]; - u8 mac[ETH_ALEN]; -} wl_probe_params_t; -#endif /* BRCM_FULLMAC */ - -#define WL_NUMRATES 16 /* max # of rates in a rateset */ -typedef struct wl_rateset { - u32 count; /* # rates in this set */ - u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ -} wl_rateset_t; - -#ifdef BRCM_FULLMAC -typedef struct wl_rateset_args { - u32 count; /* # rates in this set */ - u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ - u8 mcs[MCSSET_LEN]; /* supported mcs index bit map */ -} wl_rateset_args_t; - -/* u32 list */ -typedef struct wl_u32_list { - /* in - # of elements, out - # of entries */ - u32 count; - /* variable length u32 list */ - u32 element[1]; -} wl_u32_list_t; - -/* used for association with a specific BSSID and chanspec list */ -typedef struct wl_assoc_params { - u8 bssid[ETH_ALEN]; /* 00:00:00:00:00:00: broadcast scan */ - u16 bssid_cnt; - s32 chanspec_num; /* 0: all available channels, - * otherwise count of chanspecs in chanspec_list - */ - chanspec_t chanspec_list[1]; /* list of chanspecs */ -} wl_assoc_params_t; -#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t)) - -/* used for reassociation/roam to a specific BSSID and channel */ -typedef wl_assoc_params_t wl_reassoc_params_t; -#define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE - -/* used for join with or without a specific bssid and channel list */ -typedef struct wl_join_params { - wlc_ssid_t ssid; - wl_assoc_params_t params; /* optional field, but it must include the fixed portion - * of the wl_assoc_params_t struct when it does present. - */ -} wl_join_params_t; -#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t)) - -#endif /* BRCM_FULLMAC */ - -/* defines used by the nrate iovar */ -#define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ -#define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ -#define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ -#define NRATE_STF_SHIFT 8 /* stf mode shift */ -#define NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */ -#define NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */ -#define NRATE_SGI_MASK 0x00800000 /* sgi mode */ -#define NRATE_SGI_SHIFT 23 /* sgi mode */ -#define NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */ -#define NRATE_LDPC_SHIFT 22 /* ldpc shift */ - -#define NRATE_STF_SISO 0 /* stf mode SISO */ -#define NRATE_STF_CDD 1 /* stf mode CDD */ -#define NRATE_STF_STBC 2 /* stf mode STBC */ -#define NRATE_STF_SDM 3 /* stf mode SDM */ - -#define ANTENNA_NUM_1 1 /* total number of antennas to be used */ -#define ANTENNA_NUM_2 2 -#define ANTENNA_NUM_3 3 -#define ANTENNA_NUM_4 4 - -#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */ -#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */ -#define ANT_SELCFG_MAX 4 /* max number of antenna configurations */ -#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */ -#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */ -#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */ -#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */ - -#define MAX_STREAMS_SUPPORTED 4 /* max number of streams supported */ - -typedef struct { - u8 ant_config[ANT_SELCFG_MAX]; /* antenna configuration */ - u8 num_antcfg; /* number of available antenna configurations */ -} wlc_antselcfg_t; - -#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */ - -#ifdef BRCM_FULLMAC -#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */ -#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */ - -#define IBSS_MED 15 /* Mediom in-bss congestion percentage */ -#define IBSS_HI 25 /* Hi in-bss congestion percentage */ -#define OBSS_MED 12 -#define OBSS_HI 25 -#define INTERFER_MED 5 -#define INTERFER_HI 10 - -#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */ -#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */ -#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */ -#define CCA_FLAGS_PREFER_1_6_11 0x10 -#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */ - -#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */ -#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */ -#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */ -#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */ -#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */ - -typedef struct { - u32 duration; /* millisecs spent sampling this channel */ - u32 congest_ibss; /* millisecs in our bss (presumably this traffic will */ - /* move if cur bss moves channels) */ - u32 congest_obss; /* traffic not in our bss */ - u32 interference; /* millisecs detecting a non 802.11 interferer. */ - u32 timestamp; /* second timestamp */ -} cca_congest_t; - -typedef struct { - chanspec_t chanspec; /* Which channel? */ - u8 num_secs; /* How many secs worth of data */ - cca_congest_t secs[1]; /* Data */ -} cca_congest_channel_req_t; - -#endif /* BRCM_FULLMAC */ - -#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NUL */ - -#ifdef BRCM_FULLMAC -typedef struct wl_country { - char country_abbrev[WLC_CNTRY_BUF_SZ]; /* nul-terminated country code used in - * the Country IE - */ - s32 rev; /* revision specifier for ccode - * on set, -1 indicates unspecified. - * on get, rev >= 0 - */ - char ccode[WLC_CNTRY_BUF_SZ]; /* nul-terminated built-in country code. - * variable length, but fixed size in - * struct allows simple allocation for - * expected country strings <= 3 chars. - */ -} wl_country_t; - -typedef struct wl_channels_in_country { - u32 buflen; - u32 band; - char country_abbrev[WLC_CNTRY_BUF_SZ]; - u32 count; - u32 channel[1]; -} wl_channels_in_country_t; - -typedef struct wl_country_list { - u32 buflen; - u32 band_set; - u32 band; - u32 count; - char country_abbrev[1]; -} wl_country_list_t; - -#define WL_NUM_RPI_BINS 8 -#define WL_RM_TYPE_BASIC 1 -#define WL_RM_TYPE_CCA 2 -#define WL_RM_TYPE_RPI 3 - -#define WL_RM_FLAG_PARALLEL (1<<0) - -#define WL_RM_FLAG_LATE (1<<1) -#define WL_RM_FLAG_INCAPABLE (1<<2) -#define WL_RM_FLAG_REFUSED (1<<3) - -typedef struct wl_rm_req_elt { - s8 type; - s8 flags; - chanspec_t chanspec; - u32 token; /* token for this measurement */ - u32 tsf_h; /* TSF high 32-bits of Measurement start time */ - u32 tsf_l; /* TSF low 32-bits */ - u32 dur; /* TUs */ -} wl_rm_req_elt_t; - -typedef struct wl_rm_req { - u32 token; /* overall measurement set token */ - u32 count; /* number of measurement requests */ - void *cb; /* completion callback function: may be NULL */ - void *cb_arg; /* arg to completion callback function */ - wl_rm_req_elt_t req[1]; /* variable length block of requests */ -} wl_rm_req_t; -#define WL_RM_REQ_FIXED_LEN offsetof(wl_rm_req_t, req) - -typedef struct wl_rm_rep_elt { - s8 type; - s8 flags; - chanspec_t chanspec; - u32 token; /* token for this measurement */ - u32 tsf_h; /* TSF high 32-bits of Measurement start time */ - u32 tsf_l; /* TSF low 32-bits */ - u32 dur; /* TUs */ - u32 len; /* byte length of data block */ - u8 data[1]; /* variable length data block */ -} wl_rm_rep_elt_t; -#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ - -#define WL_RPI_REP_BIN_NUM 8 -typedef struct wl_rm_rpi_rep { - u8 rpi[WL_RPI_REP_BIN_NUM]; - s8 rpi_max[WL_RPI_REP_BIN_NUM]; -} wl_rm_rpi_rep_t; - -typedef struct wl_rm_rep { - u32 token; /* overall measurement set token */ - u32 len; /* length of measurement report block */ - wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ -} wl_rm_rep_t; -#define WL_RM_REP_FIXED_LEN 8 -#endif /* BRCM_FULLMAC */ - -/* Enumerate crypto algorithms */ -#define CRYPTO_ALGO_OFF 0 -#define CRYPTO_ALGO_WEP1 1 -#define CRYPTO_ALGO_TKIP 2 -#define CRYPTO_ALGO_WEP128 3 -#define CRYPTO_ALGO_AES_CCM 4 -#define CRYPTO_ALGO_AES_RESERVED1 5 -#define CRYPTO_ALGO_AES_RESERVED2 6 -#define CRYPTO_ALGO_NALG 7 - -#define WSEC_GEN_MIC_ERROR 0x0001 -#define WSEC_GEN_REPLAY 0x0002 -#define WSEC_GEN_ICV_ERROR 0x0004 - -#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ -#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ -#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ -#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ -#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */ - -typedef struct wl_wsec_key { - u32 index; /* key index */ - u32 len; /* key length */ - u8 data[WLAN_MAX_KEY_LEN]; /* key data */ - u32 pad_1[18]; - u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ - u32 flags; /* misc flags */ - u32 pad_2[2]; - int pad_3; - int iv_initialized; /* has IV been initialized already? */ - int pad_4; - /* Rx IV */ - struct { - u32 hi; /* upper 32 bits of IV */ - u16 lo; /* lower 16 bits of IV */ - } rxiv; - u32 pad_5[2]; - u8 ea[ETH_ALEN]; /* per station */ -} wl_wsec_key_t; - -#define WSEC_MIN_PSK_LEN 8 -#define WSEC_MAX_PSK_LEN 64 - -/* Flag for key material needing passhash'ing */ -#define WSEC_PASSPHRASE (1<<0) - -/* receptacle for WLC_SET_WSEC_PMK parameter */ -typedef struct { - unsigned short key_len; /* octets in key material */ - unsigned short flags; /* key handling qualification */ - u8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ -} wsec_pmk_t; - -/* wireless security bitvec */ -#define WEP_ENABLED 0x0001 -#define TKIP_ENABLED 0x0002 -#define AES_ENABLED 0x0004 -#define WSEC_SWFLAG 0x0008 -#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ - -/* WPA authentication mode bitvec */ -#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ -#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ -#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ -#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ -#define WPA_AUTH_RESERVED1 0x0008 -#define WPA_AUTH_RESERVED2 0x0010 - /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */ -#define WPA2_AUTH_RESERVED1 0x0020 -#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ -#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ -#define WPA2_AUTH_RESERVED3 0x0200 -#define WPA2_AUTH_RESERVED4 0x0400 -#define WPA2_AUTH_RESERVED5 0x0800 - -/* pmkid */ -#define MAXPMKID 16 - -typedef struct _pmkid { - u8 BSSID[ETH_ALEN]; - u8 PMKID[WLAN_PMKID_LEN]; -} pmkid_t; - -typedef struct _pmkid_list { - u32 npmkid; - pmkid_t pmkid[1]; -} pmkid_list_t; - -typedef struct _pmkid_cand { - u8 BSSID[ETH_ALEN]; - u8 preauth; -} pmkid_cand_t; - -typedef struct _pmkid_cand_list { - u32 npmkid_cand; - pmkid_cand_t pmkid_cand[1]; -} pmkid_cand_list_t; - -typedef struct wl_led_info { - u32 index; /* led index */ - u32 behavior; - u8 activehi; -} wl_led_info_t; - -/* R_REG and W_REG struct passed through ioctl */ -typedef struct { - u32 byteoff; /* byte offset of the field in d11regs_t */ - u32 val; /* read/write value of the field */ - u32 size; /* sizeof the field */ - uint band; /* band (optional) */ -} rw_reg_t; - - -#ifdef BRCM_FULLMAC -/* Used to get specific STA parameters */ -typedef struct { - u32 val; - u8 ea[ETH_ALEN]; -} scb_val_t; -#endif /* BRCM_FULLMAC */ - -/* channel encoding */ -typedef struct channel_info { - int hw_channel; - int target_channel; - int scan_channel; -} channel_info_t; - -/* For ioctls that take a list of MAC addresses */ -struct maclist { - uint count; /* number of MAC addresses */ - u8 ea[1][ETH_ALEN]; /* variable length array of MAC addresses */ -}; - -#ifdef BRCM_FULLMAC -/* Linux network driver ioctl encoding */ -typedef struct wl_ioctl { - uint cmd; /* common ioctl definition */ - void *buf; /* pointer to user buffer */ - uint len; /* length of user buffer */ - u8 set; /* get or set request (optional) */ - uint used; /* bytes read or written (optional) */ - uint needed; /* bytes needed (optional) */ -} wl_ioctl_t; -#endif /* BRCM_FULLMAC */ - - -/* - * Structure for passing hardware and software - * revision info up from the driver. - */ -typedef struct wlc_rev_info { - uint vendorid; /* PCI vendor id */ - uint deviceid; /* device id of chip */ - uint radiorev; /* radio revision */ - uint chiprev; /* chip revision */ - uint corerev; /* core revision */ - uint boardid; /* board identifier (usu. PCI sub-device id) */ - uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ - uint boardrev; /* board revision */ - uint driverrev; /* driver version */ - uint ucoderev; /* microcode version */ - uint bus; /* bus type */ - uint chipnum; /* chip number */ - uint phytype; /* phy type */ - uint phyrev; /* phy revision */ - uint anarev; /* anacore rev */ - uint chippkg; /* chip package info */ -} wlc_rev_info_t; - -#define WL_REV_INFO_LEGACY_LENGTH 48 - -#ifdef BRCM_FULLMAC -#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ -#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */ -#define WLC_IOCTL_MAXLEN 8192 -#endif - -/* common ioctl definitions */ -#define WLC_GET_MAGIC 0 -#define WLC_GET_VERSION 1 -#define WLC_UP 2 -#define WLC_DOWN 3 -#define WLC_GET_LOOP 4 -#define WLC_SET_LOOP 5 -#define WLC_DUMP 6 -#define WLC_GET_MSGLEVEL 7 -#define WLC_SET_MSGLEVEL 8 -#define WLC_GET_PROMISC 9 -#define WLC_SET_PROMISC 10 -#define WLC_OVERLAY_IOCTL 11 -#define WLC_GET_RATE 12 - /* #define WLC_SET_RATE 13 *//* no longer supported */ -#define WLC_GET_INSTANCE 14 - /* #define WLC_GET_FRAG 15 *//* no longer supported */ - /* #define WLC_SET_FRAG 16 *//* no longer supported */ - /* #define WLC_GET_RTS 17 *//* no longer supported */ - /* #define WLC_SET_RTS 18 *//* no longer supported */ -#define WLC_GET_INFRA 19 -#define WLC_SET_INFRA 20 -#define WLC_GET_AUTH 21 -#define WLC_SET_AUTH 22 -#define WLC_GET_BSSID 23 -#define WLC_SET_BSSID 24 -#define WLC_GET_SSID 25 -#define WLC_SET_SSID 26 -#define WLC_RESTART 27 - /* #define WLC_DUMP_SCB 28 *//* no longer supported */ -#define WLC_GET_CHANNEL 29 -#define WLC_SET_CHANNEL 30 -#define WLC_GET_SRL 31 -#define WLC_SET_SRL 32 -#define WLC_GET_LRL 33 -#define WLC_SET_LRL 34 -#define WLC_GET_PLCPHDR 35 -#define WLC_SET_PLCPHDR 36 -#define WLC_GET_RADIO 37 -#define WLC_SET_RADIO 38 -#define WLC_GET_PHYTYPE 39 -#define WLC_DUMP_RATE 40 -#define WLC_SET_RATE_PARAMS 41 -#define WLC_GET_FIXRATE 42 -#define WLC_SET_FIXRATE 43 - /* #define WLC_GET_WEP 42 *//* no longer supported */ - /* #define WLC_SET_WEP 43 *//* no longer supported */ -#define WLC_GET_KEY 44 -#define WLC_SET_KEY 45 -#define WLC_GET_REGULATORY 46 -#define WLC_SET_REGULATORY 47 -#define WLC_GET_PASSIVE_SCAN 48 -#define WLC_SET_PASSIVE_SCAN 49 -#define WLC_SCAN 50 -#define WLC_SCAN_RESULTS 51 -#define WLC_DISASSOC 52 -#define WLC_REASSOC 53 -#define WLC_GET_ROAM_TRIGGER 54 -#define WLC_SET_ROAM_TRIGGER 55 -#define WLC_GET_ROAM_DELTA 56 -#define WLC_SET_ROAM_DELTA 57 -#define WLC_GET_ROAM_SCAN_PERIOD 58 -#define WLC_SET_ROAM_SCAN_PERIOD 59 -#define WLC_EVM 60 /* diag */ -#define WLC_GET_TXANT 61 -#define WLC_SET_TXANT 62 -#define WLC_GET_ANTDIV 63 -#define WLC_SET_ANTDIV 64 - /* #define WLC_GET_TXPWR 65 *//* no longer supported */ - /* #define WLC_SET_TXPWR 66 *//* no longer supported */ -#define WLC_GET_CLOSED 67 -#define WLC_SET_CLOSED 68 -#define WLC_GET_MACLIST 69 -#define WLC_SET_MACLIST 70 -#define WLC_GET_RATESET 71 -#define WLC_SET_RATESET 72 - /* #define WLC_GET_LOCALE 73 *//* no longer supported */ -#define WLC_LONGTRAIN 74 -#define WLC_GET_BCNPRD 75 -#define WLC_SET_BCNPRD 76 -#define WLC_GET_DTIMPRD 77 -#define WLC_SET_DTIMPRD 78 -#define WLC_GET_SROM 79 -#define WLC_SET_SROM 80 -#define WLC_GET_WEP_RESTRICT 81 -#define WLC_SET_WEP_RESTRICT 82 -#define WLC_GET_COUNTRY 83 -#define WLC_SET_COUNTRY 84 -#define WLC_GET_PM 85 -#define WLC_SET_PM 86 -#define WLC_GET_WAKE 87 -#define WLC_SET_WAKE 88 - /* #define WLC_GET_D11CNTS 89 *//* -> "counters" iovar */ -#define WLC_GET_FORCELINK 90 /* ndis only */ -#define WLC_SET_FORCELINK 91 /* ndis only */ -#define WLC_FREQ_ACCURACY 92 /* diag */ -#define WLC_CARRIER_SUPPRESS 93 /* diag */ -#define WLC_GET_PHYREG 94 -#define WLC_SET_PHYREG 95 -#define WLC_GET_RADIOREG 96 -#define WLC_SET_RADIOREG 97 -#define WLC_GET_REVINFO 98 -#define WLC_GET_UCANTDIV 99 -#define WLC_SET_UCANTDIV 100 -#define WLC_R_REG 101 -#define WLC_W_REG 102 -/* #define WLC_DIAG_LOOPBACK 103 old tray diag */ - /* #define WLC_RESET_D11CNTS 104 *//* -> "reset_d11cnts" iovar */ -#define WLC_GET_MACMODE 105 -#define WLC_SET_MACMODE 106 -#define WLC_GET_MONITOR 107 -#define WLC_SET_MONITOR 108 -#define WLC_GET_GMODE 109 -#define WLC_SET_GMODE 110 -#define WLC_GET_LEGACY_ERP 111 -#define WLC_SET_LEGACY_ERP 112 -#define WLC_GET_RX_ANT 113 -#define WLC_GET_CURR_RATESET 114 /* current rateset */ -#define WLC_GET_SCANSUPPRESS 115 -#define WLC_SET_SCANSUPPRESS 116 -#define WLC_GET_AP 117 -#define WLC_SET_AP 118 -#define WLC_GET_EAP_RESTRICT 119 -#define WLC_SET_EAP_RESTRICT 120 -#define WLC_SCB_AUTHORIZE 121 -#define WLC_SCB_DEAUTHORIZE 122 -#define WLC_GET_WDSLIST 123 -#define WLC_SET_WDSLIST 124 -#define WLC_GET_ATIM 125 -#define WLC_SET_ATIM 126 -#define WLC_GET_RSSI 127 -#define WLC_GET_PHYANTDIV 128 -#define WLC_SET_PHYANTDIV 129 -#define WLC_AP_RX_ONLY 130 -#define WLC_GET_TX_PATH_PWR 131 -#define WLC_SET_TX_PATH_PWR 132 -#define WLC_GET_WSEC 133 -#define WLC_SET_WSEC 134 -#define WLC_GET_PHY_NOISE 135 -#define WLC_GET_BSS_INFO 136 -#define WLC_GET_PKTCNTS 137 -#define WLC_GET_LAZYWDS 138 -#define WLC_SET_LAZYWDS 139 -#define WLC_GET_BANDLIST 140 -#define WLC_GET_BAND 141 -#define WLC_SET_BAND 142 -#define WLC_SCB_DEAUTHENTICATE 143 -#define WLC_GET_SHORTSLOT 144 -#define WLC_GET_SHORTSLOT_OVERRIDE 145 -#define WLC_SET_SHORTSLOT_OVERRIDE 146 -#define WLC_GET_SHORTSLOT_RESTRICT 147 -#define WLC_SET_SHORTSLOT_RESTRICT 148 -#define WLC_GET_GMODE_PROTECTION 149 -#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 -#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 -#define WLC_UPGRADE 152 - /* #define WLC_GET_MRATE 153 *//* no longer supported */ - /* #define WLC_SET_MRATE 154 *//* no longer supported */ -#define WLC_GET_IGNORE_BCNS 155 -#define WLC_SET_IGNORE_BCNS 156 -#define WLC_GET_SCB_TIMEOUT 157 -#define WLC_SET_SCB_TIMEOUT 158 -#define WLC_GET_ASSOCLIST 159 -#define WLC_GET_CLK 160 -#define WLC_SET_CLK 161 -#define WLC_GET_UP 162 -#define WLC_OUT 163 -#define WLC_GET_WPA_AUTH 164 -#define WLC_SET_WPA_AUTH 165 -#define WLC_GET_UCFLAGS 166 -#define WLC_SET_UCFLAGS 167 -#define WLC_GET_PWRIDX 168 -#define WLC_SET_PWRIDX 169 -#define WLC_GET_TSSI 170 -#define WLC_GET_SUP_RATESET_OVERRIDE 171 -#define WLC_SET_SUP_RATESET_OVERRIDE 172 - /* #define WLC_SET_FAST_TIMER 173 *//* no longer supported */ - /* #define WLC_GET_FAST_TIMER 174 *//* no longer supported */ - /* #define WLC_SET_SLOW_TIMER 175 *//* no longer supported */ - /* #define WLC_GET_SLOW_TIMER 176 *//* no longer supported */ - /* #define WLC_DUMP_PHYREGS 177 *//* no longer supported */ -#define WLC_GET_PROTECTION_CONTROL 178 -#define WLC_SET_PROTECTION_CONTROL 179 -#define WLC_GET_PHYLIST 180 -#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ -#define WLC_DECRYPT_STATUS 182 /* ndis only */ -#define WLC_GET_KEY_SEQ 183 -#define WLC_GET_SCAN_CHANNEL_TIME 184 -#define WLC_SET_SCAN_CHANNEL_TIME 185 -#define WLC_GET_SCAN_UNASSOC_TIME 186 -#define WLC_SET_SCAN_UNASSOC_TIME 187 -#define WLC_GET_SCAN_HOME_TIME 188 -#define WLC_SET_SCAN_HOME_TIME 189 -#define WLC_GET_SCAN_NPROBES 190 -#define WLC_SET_SCAN_NPROBES 191 -#define WLC_GET_PRB_RESP_TIMEOUT 192 -#define WLC_SET_PRB_RESP_TIMEOUT 193 -#define WLC_GET_ATTEN 194 -#define WLC_SET_ATTEN 195 -#define WLC_GET_SHMEM 196 /* diag */ -#define WLC_SET_SHMEM 197 /* diag */ - /* #define WLC_GET_GMODE_PROTECTION_CTS 198 *//* no longer supported */ - /* #define WLC_SET_GMODE_PROTECTION_CTS 199 *//* no longer supported */ -#define WLC_SET_WSEC_TEST 200 -#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 -#define WLC_TKIP_COUNTERMEASURES 202 -#define WLC_GET_PIOMODE 203 -#define WLC_SET_PIOMODE 204 -#define WLC_SET_ASSOC_PREFER 205 -#define WLC_GET_ASSOC_PREFER 206 -#define WLC_SET_ROAM_PREFER 207 -#define WLC_GET_ROAM_PREFER 208 -#define WLC_SET_LED 209 -#define WLC_GET_LED 210 -#define WLC_RESERVED6 211 -#define WLC_RESERVED7 212 -#define WLC_GET_CHANNEL_QA 213 -#define WLC_START_CHANNEL_QA 214 -#define WLC_GET_CHANNEL_SEL 215 -#define WLC_START_CHANNEL_SEL 216 -#define WLC_GET_VALID_CHANNELS 217 -#define WLC_GET_FAKEFRAG 218 -#define WLC_SET_FAKEFRAG 219 -#define WLC_GET_PWROUT_PERCENTAGE 220 -#define WLC_SET_PWROUT_PERCENTAGE 221 -#define WLC_SET_BAD_FRAME_PREEMPT 222 -#define WLC_GET_BAD_FRAME_PREEMPT 223 -#define WLC_SET_LEAP_LIST 224 -#define WLC_GET_LEAP_LIST 225 -#define WLC_GET_CWMIN 226 -#define WLC_SET_CWMIN 227 -#define WLC_GET_CWMAX 228 -#define WLC_SET_CWMAX 229 -#define WLC_GET_WET 230 -#define WLC_SET_WET 231 -#define WLC_GET_PUB 232 - /* #define WLC_SET_GLACIAL_TIMER 233 *//* no longer supported */ - /* #define WLC_GET_GLACIAL_TIMER 234 *//* no longer supported */ -#define WLC_GET_KEY_PRIMARY 235 -#define WLC_SET_KEY_PRIMARY 236 - /* #define WLC_DUMP_RADIOREGS 237 *//* no longer supported */ -#define WLC_RESERVED4 238 -#define WLC_RESERVED5 239 -#define WLC_UNSET_CALLBACK 240 -#define WLC_SET_CALLBACK 241 -#define WLC_GET_RADAR 242 -#define WLC_SET_RADAR 243 -#define WLC_SET_SPECT_MANAGMENT 244 -#define WLC_GET_SPECT_MANAGMENT 245 -#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */ -#define WLC_WDS_GET_WPA_SUP 247 -#define WLC_SET_CS_SCAN_TIMER 248 -#define WLC_GET_CS_SCAN_TIMER 249 -#define WLC_MEASURE_REQUEST 250 -#define WLC_INIT 251 -#define WLC_SEND_QUIET 252 -#define WLC_KEEPALIVE 253 -#define WLC_SEND_PWR_CONSTRAINT 254 -#define WLC_UPGRADE_STATUS 255 -#define WLC_CURRENT_PWR 256 -#define WLC_GET_SCAN_PASSIVE_TIME 257 -#define WLC_SET_SCAN_PASSIVE_TIME 258 -#define WLC_LEGACY_LINK_BEHAVIOR 259 -#define WLC_GET_CHANNELS_IN_COUNTRY 260 -#define WLC_GET_COUNTRY_LIST 261 -#define WLC_GET_VAR 262 /* get value of named variable */ -#define WLC_SET_VAR 263 /* set named variable to value */ -#define WLC_NVRAM_GET 264 /* deprecated */ -#define WLC_NVRAM_SET 265 -#define WLC_NVRAM_DUMP 266 -#define WLC_REBOOT 267 -#define WLC_SET_WSEC_PMK 268 -#define WLC_GET_AUTH_MODE 269 -#define WLC_SET_AUTH_MODE 270 -#define WLC_GET_WAKEENTRY 271 -#define WLC_SET_WAKEENTRY 272 -#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ -#define WLC_NVOTPW 274 -#define WLC_OTPW 275 -#define WLC_IOV_BLOCK_GET 276 -#define WLC_IOV_MODULES_GET 277 -#define WLC_SOFT_RESET 278 -#define WLC_GET_ALLOW_MODE 279 -#define WLC_SET_ALLOW_MODE 280 -#define WLC_GET_DESIRED_BSSID 281 -#define WLC_SET_DESIRED_BSSID 282 -#define WLC_DISASSOC_MYAP 283 -#define WLC_GET_RESERVED10 284 -#define WLC_GET_RESERVED11 285 -#define WLC_GET_RESERVED12 286 -#define WLC_GET_RESERVED13 287 -#define WLC_GET_RESERVED14 288 -#define WLC_SET_RESERVED15 289 -#define WLC_SET_RESERVED16 290 -#define WLC_GET_RESERVED17 291 -#define WLC_GET_RESERVED18 292 -#define WLC_GET_RESERVED19 293 -#define WLC_SET_RESERVED1A 294 -#define WLC_GET_RESERVED1B 295 -#define WLC_GET_RESERVED1C 296 -#define WLC_GET_RESERVED1D 297 -#define WLC_SET_RESERVED1E 298 -#define WLC_GET_RESERVED1F 299 -#define WLC_GET_RESERVED20 300 -#define WLC_GET_RESERVED21 301 -#define WLC_GET_RESERVED22 302 -#define WLC_GET_RESERVED23 303 -#define WLC_GET_RESERVED24 304 -#define WLC_SET_RESERVED25 305 -#define WLC_GET_RESERVED26 306 -#define WLC_NPHY_SAMPLE_COLLECT 307 /* Nphy sample collect mode */ -#define WLC_UM_PRIV 308 /* for usermode driver private ioctl */ -#define WLC_GET_CMD 309 - /* #define WLC_LAST 310 *//* Never used - can be reused */ -#define WLC_RESERVED8 311 -#define WLC_RESERVED9 312 -#define WLC_RESERVED1 313 -#define WLC_RESERVED2 314 -#define WLC_RESERVED3 315 -#define WLC_LAST 316 - -#ifndef EPICTRL_COOKIE -#define EPICTRL_COOKIE 0xABADCEDE -#endif - -#define WL_DECRYPT_STATUS_SUCCESS 1 -#define WL_DECRYPT_STATUS_FAILURE 2 -#define WL_DECRYPT_STATUS_UNKNOWN 3 - -/* allows user-mode app to poll the status of USB image upgrade */ -#define WLC_UPGRADE_SUCCESS 0 -#define WLC_UPGRADE_PENDING 1 - -/* WLC_GET_AUTH, WLC_SET_AUTH values */ -#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */ -#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ -#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */ - -/* Bit masks for radio disabled status - returned by WL_GET_RADIO */ -#define WL_RADIO_SW_DISABLE (1<<0) -#define WL_RADIO_HW_DISABLE (1<<1) -#define WL_RADIO_MPC_DISABLE (1<<2) -#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ - -#define WL_SPURAVOID_OFF 0 -#define WL_SPURAVOID_ON1 1 -#define WL_SPURAVOID_ON2 2 - -/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ -#define WL_TXPWR_OVERRIDE (1U<<31) - -#define WL_PHY_PAVARS_LEN 6 /* Phy type, Band range, chain, a1, b0, b1 */ - -typedef struct wl_po { - u16 phy_type; /* Phy type */ - u16 band; - u16 cckpo; - u32 ofdmpo; - u16 mcspo[8]; -} wl_po_t; - -/* a large TX Power as an init value to factor out of min() calculations, - * keep low enough to fit in an s8, units are .25 dBm - */ -#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */ - -/* "diag" iovar argument and error code */ -#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ -#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */ -#define WL_DIAG_MEMORY 3 /* d11 memory test */ -#define WL_DIAG_LED 4 /* LED test */ -#define WL_DIAG_REG 5 /* d11/phy register test */ -#define WL_DIAG_SROM 6 /* srom read/crc test */ -#define WL_DIAG_DMA 7 /* DMA test */ - -#define WL_DIAGERR_SUCCESS 0 -#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ -#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ -#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ -#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ -#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ -#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ -#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ -#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ -#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ -#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ - -#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */ -#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */ - -/* band types */ -#define WLC_BAND_AUTO 0 /* auto-select */ -#define WLC_BAND_5G 1 /* 5 Ghz */ -#define WLC_BAND_2G 2 /* 2.4 Ghz */ -#define WLC_BAND_ALL 3 /* all bands */ - -/* band range returned by band_range iovar */ -#define WL_CHAN_FREQ_RANGE_2G 0 -#define WL_CHAN_FREQ_RANGE_5GL 1 -#define WL_CHAN_FREQ_RANGE_5GM 2 -#define WL_CHAN_FREQ_RANGE_5GH 3 - -/* phy types (returned by WLC_GET_PHYTPE) */ -#define WLC_PHY_TYPE_A 0 -#define WLC_PHY_TYPE_B 1 -#define WLC_PHY_TYPE_G 2 -#define WLC_PHY_TYPE_N 4 -#define WLC_PHY_TYPE_LP 5 -#define WLC_PHY_TYPE_SSN 6 -#define WLC_PHY_TYPE_HT 7 -#define WLC_PHY_TYPE_LCN 8 -#define WLC_PHY_TYPE_NULL 0xf - -/* MAC list modes */ -#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ -#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ -#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ - -/* - * 54g modes (basic bits may still be overridden) - * - * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11 - * Preamble: Long - * Shortslot: Off - * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 - * Extended Rateset: 6, 9, 12, 48 - * Preamble: Long - * Shortslot: Auto - * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 - * Extended Rateset: 6b, 9, 12b, 48 - * Preamble: Short required - * Shortslot: Auto - * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 - * Extended Rateset: 6, 9, 12, 48 - * Preamble: Long - * Shortslot: On - * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 - * Preamble: Short required - * Shortslot: On and required - * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b - * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 - * Preamble: Long - * Shortslot: Auto - */ -#define GMODE_LEGACY_B 0 -#define GMODE_AUTO 1 -#define GMODE_ONLY 2 -#define GMODE_B_DEFERRED 3 -#define GMODE_PERFORMANCE 4 -#define GMODE_LRS 5 -#define GMODE_MAX 6 - -/* values for PLCPHdr_override */ -#define WLC_PLCP_AUTO -1 -#define WLC_PLCP_SHORT 0 -#define WLC_PLCP_LONG 1 - -/* values for g_protection_override and n_protection_override */ -#define WLC_PROTECTION_AUTO -1 -#define WLC_PROTECTION_OFF 0 -#define WLC_PROTECTION_ON 1 -#define WLC_PROTECTION_MMHDR_ONLY 2 -#define WLC_PROTECTION_CTS_ONLY 3 - -/* values for g_protection_control and n_protection_control */ -#define WLC_PROTECTION_CTL_OFF 0 -#define WLC_PROTECTION_CTL_LOCAL 1 -#define WLC_PROTECTION_CTL_OVERLAP 2 - -/* values for n_protection */ -#define WLC_N_PROTECTION_OFF 0 -#define WLC_N_PROTECTION_OPTIONAL 1 -#define WLC_N_PROTECTION_20IN40 2 -#define WLC_N_PROTECTION_MIXEDMODE 3 - -/* values for n_preamble_type */ -#define WLC_N_PREAMBLE_MIXEDMODE 0 -#define WLC_N_PREAMBLE_GF 1 -#define WLC_N_PREAMBLE_GF_BRCM 2 - -/* values for band specific 40MHz capabilities */ -#define WLC_N_BW_20ALL 0 -#define WLC_N_BW_40ALL 1 -#define WLC_N_BW_20IN2G_40IN5G 2 - -/* values to force tx/rx chain */ -#define WLC_N_TXRX_CHAIN0 0 -#define WLC_N_TXRX_CHAIN1 1 - -/* bitflags for SGI support (sgi_rx iovar) */ -#define WLC_N_SGI_20 0x01 -#define WLC_N_SGI_40 0x02 - -/* Values for PM */ -#define PM_OFF 0 -#define PM_MAX 1 - -/* interference mitigation options */ -#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */ -#define INTERFERE_NONE 0 /* off */ -#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ -#define WLAN_MANUAL 2 /* ACI: no auto detection */ -#define WLAN_AUTO 3 /* ACI: auto detect */ -#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */ -#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */ - -#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */ -#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */ -#define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */ -#define WL_ANT_IDX_1 0 /* antenna index 1 */ -#define WL_ANT_IDX_2 1 /* antenna index 2 */ - -#ifndef WL_RSSI_ANT_MAX -#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ -#elif WL_RSSI_ANT_MAX != 4 -#error "WL_RSSI_ANT_MAX does not match" -#endif - -/* RSSI per antenna */ -typedef struct { - u32 version; /* version field */ - u32 count; /* number of valid antenna rssi */ - s8 rssi_ant[WL_RSSI_ANT_MAX]; /* rssi per antenna */ -} wl_rssi_ant_t; - -#define NUM_PWRCTRL_RATES 12 - -typedef struct { - u8 txpwr_band_max[NUM_PWRCTRL_RATES]; /* User set target */ - u8 txpwr_limit[NUM_PWRCTRL_RATES]; /* reg and local power limit */ - u8 txpwr_local_max; /* local max according to the AP */ - u8 txpwr_local_constraint; /* local constraint according to the AP */ - u8 txpwr_chan_reg_max; /* Regulatory max for this channel */ - u8 txpwr_target[2][NUM_PWRCTRL_RATES]; /* Latest target for 2.4 and 5 Ghz */ - u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */ - u8 txpwr_opo[NUM_PWRCTRL_RATES]; /* On G phy, OFDM power offset */ - u8 txpwr_bphy_cck_max[NUM_PWRCTRL_RATES]; /* Max CCK power for this band (SROM) */ - u8 txpwr_bphy_ofdm_max; /* Max OFDM power for this band (SROM) */ - u8 txpwr_aphy_max[NUM_PWRCTRL_RATES]; /* Max power for A band (SROM) */ - s8 txpwr_antgain[2]; /* Ant gain for each band - from SROM */ - u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */ -} tx_power_legacy_t; - -#define WL_TX_POWER_RATES_LEGACY 45 -#define WL_TX_POWER_MCS20_FIRST 12 -#define WL_TX_POWER_MCS20_NUM 16 -#define WL_TX_POWER_MCS40_FIRST 28 -#define WL_TX_POWER_MCS40_NUM 17 - - -#define WL_TX_POWER_RATES 101 -#define WL_TX_POWER_CCK_FIRST 0 -#define WL_TX_POWER_CCK_NUM 4 -#define WL_TX_POWER_OFDM_FIRST 4 /* Index for first 20MHz OFDM SISO rate */ -#define WL_TX_POWER_OFDM20_CDD_FIRST 12 /* Index for first 20MHz OFDM CDD rate */ -#define WL_TX_POWER_OFDM40_SISO_FIRST 52 /* Index for first 40MHz OFDM SISO rate */ -#define WL_TX_POWER_OFDM40_CDD_FIRST 60 /* Index for first 40MHz OFDM CDD rate */ -#define WL_TX_POWER_OFDM_NUM 8 -#define WL_TX_POWER_MCS20_SISO_FIRST 20 /* Index for first 20MHz MCS SISO rate */ -#define WL_TX_POWER_MCS20_CDD_FIRST 28 /* Index for first 20MHz MCS CDD rate */ -#define WL_TX_POWER_MCS20_STBC_FIRST 36 /* Index for first 20MHz MCS STBC rate */ -#define WL_TX_POWER_MCS20_SDM_FIRST 44 /* Index for first 20MHz MCS SDM rate */ -#define WL_TX_POWER_MCS40_SISO_FIRST 68 /* Index for first 40MHz MCS SISO rate */ -#define WL_TX_POWER_MCS40_CDD_FIRST 76 /* Index for first 40MHz MCS CDD rate */ -#define WL_TX_POWER_MCS40_STBC_FIRST 84 /* Index for first 40MHz MCS STBC rate */ -#define WL_TX_POWER_MCS40_SDM_FIRST 92 /* Index for first 40MHz MCS SDM rate */ -#define WL_TX_POWER_MCS_1_STREAM_NUM 8 -#define WL_TX_POWER_MCS_2_STREAM_NUM 8 -#define WL_TX_POWER_MCS_32 100 /* Index for 40MHz rate MCS 32 */ -#define WL_TX_POWER_MCS_32_NUM 1 - -/* sslpnphy specifics */ -#define WL_TX_POWER_MCS20_SISO_FIRST_SSN 12 /* Index for first 20MHz MCS SISO rate */ - -/* tx_power_t.flags bits */ -#define WL_TX_POWER_F_ENABLED 1 -#define WL_TX_POWER_F_HW 2 -#define WL_TX_POWER_F_MIMO 4 -#define WL_TX_POWER_F_SISO 8 - -typedef struct { - u32 flags; - chanspec_t chanspec; /* txpwr report for this channel */ - chanspec_t local_chanspec; /* channel on which we are associated */ - u8 local_max; /* local max according to the AP */ - u8 local_constraint; /* local constraint according to the AP */ - s8 antgain[2]; /* Ant gain for each band - from SROM */ - u8 rf_cores; /* count of RF Cores being reported */ - u8 est_Pout[4]; /* Latest tx power out estimate per RF chain */ - u8 est_Pout_act[4]; /* Latest tx power out estimate per RF chain - * without adjustment - */ - u8 est_Pout_cck; /* Latest CCK tx power out estimate */ - u8 tx_power_max[4]; /* Maximum target power among all rates */ - u8 tx_power_max_rate_ind[4]; /* Index of the rate with the max target power */ - u8 user_limit[WL_TX_POWER_RATES]; /* User limit */ - u8 reg_limit[WL_TX_POWER_RATES]; /* Regulatory power limit */ - u8 board_limit[WL_TX_POWER_RATES]; /* Max power board can support (SROM) */ - u8 target[WL_TX_POWER_RATES]; /* Latest target power */ -} tx_power_t; - -typedef struct tx_inst_power { - u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */ - u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */ -} tx_inst_power_t; - -/* Message levels */ -#define WL_ERROR_VAL 0x00000001 -#define WL_TRACE_VAL 0x00000002 - -/* maximum channels returned by the get valid channels iovar */ -#define WL_NUMCHANNELS 64 -#define WL_NUMCHANSPECS 100 - -struct tsinfo_arg { - u8 octets[3]; -}; - -#define NFIFO 6 /* # tx/rx fifopairs */ - -struct wl_msglevel2 { - u32 low; - u32 high; -}; - -/* structure for per-tid ampdu control */ -struct ampdu_tid_control { - u8 tid; /* tid */ - u8 enable; /* enable/disable */ -}; - -/* structure for identifying ea/tid for sending addba/delba */ -struct ampdu_ea_tid { - u8 ea[ETH_ALEN]; /* Station address */ - u8 tid; /* tid */ -}; -/* structure for identifying retry/tid for retry_limit_tid/rr_retry_limit_tid */ -struct ampdu_retry_tid { - u8 tid; /* tid */ - u8 retry; /* retry value */ -}; - - -/* Software feature flag defines used by wlfeatureflag */ -#define WL_SWFL_NOHWRADIO 0x0004 -#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */ -#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */ - -#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */ - - -/* Pattern matching filter. Specifies an offset within received packets to - * start matching, the pattern to match, the size of the pattern, and a bitmask - * that indicates which bits within the pattern should be matched. - */ -typedef struct wl_pkt_filter_pattern { - u32 offset; /* Offset within received packet to start pattern matching. - * Offset '0' is the first byte of the ethernet header. - */ - u32 size_bytes; /* Size of the pattern. Bitmask must be the same size. */ - u8 mask_and_pattern[1]; /* Variable length mask and pattern data. mask starts - * at offset 0. Pattern immediately follows mask. - */ -} wl_pkt_filter_pattern_t; - -/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ -typedef struct wl_pkt_filter { - u32 id; /* Unique filter id, specified by app. */ - u32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ - u32 negate_match; /* Negate the result of filter matches */ - union { /* Filter definitions */ - wl_pkt_filter_pattern_t pattern; /* Pattern matching filter */ - } u; -} wl_pkt_filter_t; - -#define WL_PKT_FILTER_FIXED_LEN offsetof(wl_pkt_filter_t, u) -#define WL_PKT_FILTER_PATTERN_FIXED_LEN offsetof(wl_pkt_filter_pattern_t, mask_and_pattern) - -/* IOVAR "pkt_filter_enable" parameter. */ -typedef struct wl_pkt_filter_enable { - u32 id; /* Unique filter id */ - u32 enable; /* Enable/disable bool */ -} wl_pkt_filter_enable_t; - - -#define WLC_RSSI_INVALID 0 /* invalid RSSI value */ - -/* n-mode support capability */ -/* 2x2 includes both 1x1 & 2x2 devices - * reserved #define 2 for future when we want to separate 1x1 & 2x2 and - * control it independently - */ -#define WL_11N_2x2 1 -#define WL_11N_3x3 3 -#define WL_11N_4x4 4 - -/* define 11n feature disable flags */ -#define WLFEATURE_DISABLE_11N 0x00000001 -#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002 -#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004 -#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008 -#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010 -#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020 -#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040 -#define WLFEATURE_DISABLE_11N_GF 0x00000080 - -#define WL_EVENTING_MASK_LEN 16 - -#define TOE_TX_CSUM_OL 0x00000001 -#define TOE_RX_CSUM_OL 0x00000002 - -#define PM_OFF 0 -#define PM_MAX 1 -#define PM_FAST 2 - -typedef enum sup_auth_status { - WLC_SUP_DISCONNECTED = 0, - WLC_SUP_CONNECTING, - WLC_SUP_IDREQUIRED, - WLC_SUP_AUTHENTICATING, - WLC_SUP_AUTHENTICATED, - WLC_SUP_KEYXCHANGE, - WLC_SUP_KEYED, - WLC_SUP_TIMEOUT, - WLC_SUP_LAST_BASIC_STATE, - WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED, - WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE, - WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE, - WLC_SUP_KEYXCHANGE_PREP_M4, - WLC_SUP_KEYXCHANGE_WAIT_G1, - WLC_SUP_KEYXCHANGE_PREP_G2 -} sup_auth_status_t; #endif /* _wlioctl_h_ */ -- 1.7.4.1