Return-path: Received: from nbd.name ([46.4.11.11]:48090 "EHLO nbd.name" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753679Ab1GLBtD (ORCPT ); Mon, 11 Jul 2011 21:49:03 -0400 From: Felix Fietkau To: linux-wireless@vger.kernel.org Cc: linville@tuxdriver.com, lrodriguez@atheros.com Subject: [PATCH v2] ath9k: improve reliability of MIC error detection Date: Tue, 12 Jul 2011 09:48:53 +0800 Message-Id: <1310435333-70700-1-git-send-email-nbd@openwrt.org> (sfid-20110712_034908_250032_03D8825A) Sender: linux-wireless-owner@vger.kernel.org List-ID: For unicast the hardware sometimes reports MIC errors even though the frame that it received actually contains a valid MIC - on some chips this can happen frequently enough to trigger TKIP countermeasures. Fix this issue by not reporting MIC errors for unicast frames with a valid key, letting mac80211 validate the MIC instead. Additionally, strip the MIC for all frames that the hardware considers valid to avoid wasting CPU cycles re-validating it. Signed-off-by: Felix Fietkau --- drivers/net/wireless/ath/ath9k/recv.c | 44 +++++++++++++++++--------------- 1 files changed, 23 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 80bb04f..3d9359a 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -814,16 +814,19 @@ static bool ath9k_rx_accept(struct ath_common *common, struct ath_rx_status *rx_stats, bool *decrypt_error) { -#define is_mc_or_valid_tkip_keyix ((is_mc || \ - (rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \ - test_bit(rx_stats->rs_keyix, common->tkip_keymap)))) - + bool is_mc, is_valid_tkip, strip_mic, mic_error = false; struct ath_hw *ah = common->ah; __le16 fc; u8 rx_status_len = ah->caps.rx_status_len; fc = hdr->frame_control; + is_mc = !!is_multicast_ether_addr(hdr->addr1); + is_valid_tkip = rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && + test_bit(rx_stats->rs_keyix, common->tkip_keymap); + strip_mic = is_valid_tkip && !(rx_stats->rs_status & + (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC)); + if (!rx_stats->rs_datalen) return false; /* @@ -850,25 +853,9 @@ static bool ath9k_rx_accept(struct ath_common *common, if (rx_stats->rs_status & ATH9K_RXERR_PHY) return false; - if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) { + if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) *decrypt_error = true; - } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) { - bool is_mc; - /* - * The MIC error bit is only valid if the frame - * is not a control frame or fragment, and it was - * decrypted using a valid TKIP key. - */ - is_mc = !!is_multicast_ether_addr(hdr->addr1); - if (!ieee80211_is_ctl(fc) && - !ieee80211_has_morefrags(fc) && - !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) && - is_mc_or_valid_tkip_keyix) - rxs->flag |= RX_FLAG_MMIC_ERROR; - else - rx_stats->rs_status &= ~ATH9K_RXERR_MIC; - } /* * Reject error frames with the exception of * decryption and MIC failures. For monitor mode, @@ -886,6 +873,18 @@ static bool ath9k_rx_accept(struct ath_common *common, } } } + + /* + * For unicast frames the MIC error bit can have false positives, + * so all MIC error reports need to be validated in software. + * False negatives are not common, so skip software verification + * if the hardware considers the MIC valid. + */ + if (strip_mic) + rxs->flag |= RX_FLAG_MMIC_STRIPPED; + else if (is_mc && mic_error) + rxs->flag |= RX_FLAG_MMIC_ERROR; + return true; } @@ -1938,6 +1937,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) sc->rx.rxotherant = 0; } + if (rxs->flag & RX_FLAG_MMIC_STRIPPED) + skb_trim(skb, skb->len - 8); + spin_lock_irqsave(&sc->sc_pm_lock, flags); if ((sc->ps_flags & (PS_WAIT_FOR_BEACON | -- 1.7.3.2