Return-path: Received: from mail-pz0-f42.google.com ([209.85.210.42]:58339 "EHLO mail-pz0-f42.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751425Ab1HIJLU convert rfc822-to-8bit (ORCPT ); Tue, 9 Aug 2011 05:11:20 -0400 Received: by pzk37 with SMTP id 37so9785591pzk.1 for ; Tue, 09 Aug 2011 02:11:19 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: <4E40D58A.4000901@01019freenet.de> References: <4E40D58A.4000901@01019freenet.de> Date: Tue, 9 Aug 2011 17:11:19 +0800 Message-ID: (sfid-20110809_111128_598097_3AB0CF20) Subject: Re: AR9285 Wireless 80211n mode get only 25Mbit with Linux 2.6.38.8 and compat-wireless-2.6.38.2-2 From: Dane Shih To: Andreas Hartmann Cc: linux-wireless@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: thanks kernel upgrade to 3.0 and install compat-wireless_3.0_stable_releases ath9k driver [ 4] local 192.168.100.254 port 5001 connected with 192.168.100.47 port 49230 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 2.1 sec 10.0 MBytes 40.5 Mbits/sec [ 5] local 192.168.100.254 port 5001 connected with 192.168.100.47 port 49231 [ 5] 0.0- 6.4 sec 30.0 MBytes 39.2 Mbits/sec 80211n maxinum throughput 40Mbit what i should be check another question wireless client also get 100 MBit/s thanks 2011/8/9 Andreas Hartmann : > Dane Shih schrieb: >> hi all >> >> i try to setup AR9285 Wireless ?ap mode on fedora 12 >> >> but it seem not stable when setup Master mode use hostapd >> so ...i upgrade kernel to ?2.6.38.8 >> it's better, no more disconnect >> >> but ap mode in 80211n >> >> hostapd.conf >> >> nterface=wlan0 >> driver=nl80211 >> ssid=test >> hw_mode=g >> wme_enabled=1 >> ieee80211n=1 >> ht_capab=HT40+ > > I'm using > > ht_capab=[HT40+][SHORT-GI-40][DSSS_CCK-40][TX-STBC][RX-STBC1][MAX-AMSDU-3839] > channel=1 > > with this chip and get about 100 MBit/s (kernel 3.0 or 2.6.39) > > > Andreas >