Return-path: Received: from smtp.alice.nl ([217.149.195.8]:55253 "EHLO smtp.alice.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752188Ab1HIUbu (ORCPT ); Tue, 9 Aug 2011 16:31:50 -0400 Message-ID: <4E418A39.5060705@cobradevil.org> (sfid-20110809_223155_704074_8E5394E2) Date: Tue, 09 Aug 2011 21:27:53 +0200 From: william MIME-Version: 1.0 To: Larry Finger CC: linux-wireless@vger.kernel.org Subject: Re: rtl8192cu sometimes it can authenticate to ap References: <34676454425401d650be733a43191a53@cobradevil.org> <532595cb4d5ef910de54a4736ba76185@cobradevil.org> <4E41624E.3010904@lwfinger.net> In-Reply-To: <4E41624E.3010904@lwfinger.net> Content-Type: multipart/mixed; boundary="------------070602050103070004090301" Sender: linux-wireless-owner@vger.kernel.org List-ID: This is a multi-part message in MIME format. --------------070602050103070004090301 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Ok attached log files and below my test at home Test scenario: @home I have a netgear wireless router which does wpa2 aes i cannot get it to work anymore as at work so forgive me for these mixed results. What i do is compile todays compat wireless on ubuntu maverick and on natty http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2 I installed kernel headers and build-essentials end run: ./scripts/driver-select rtlwifi make && make install ################################################################### ubuntu maverick ################################################################### ubuntu maverick 2.6.35-30.54: dmesg -c after cold boot: plugging in adapter: dmesg: [ 387.400102] usb 2-5: new high speed USB device using ehci_hcd and address 3 [ 387.682348] rtl8192cu: MAC address: 00:a1:b0:89:82:1c [ 387.682361] rtl8192cu: Board Type 0 [ 387.713558] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 387.713565] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 387.713568] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713571] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 387.713573] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713576] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 387.713578] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713580] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 387.713583] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713585] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 387.713588] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713590] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 387.713593] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713595] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 387.713598] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713600] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 387.713603] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713605] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 387.713607] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713610] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 387.713612] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713615] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 387.713617] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713620] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713622] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713624] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713886] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 387.718805] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 387.719469] usbcore: registered new interface driver rtl8192cu [ 387.740881] udev[987]: renamed network interface wlan0 to wlan1 wpa_supplicant -Dnl80211 -dd -c /etc/wpa_supplicant_thuis.conf -f wpa_supplicant.log -iwlan1 wpa_supplicant-ubuntu-maverick_cold_boot.log dmesg: [ 387.400102] usb 2-5: new high speed USB device using ehci_hcd and address 3 [ 387.682348] rtl8192cu: MAC address: 00:a1:b0:89:82:1c [ 387.682361] rtl8192cu: Board Type 0 [ 387.713558] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 387.713565] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 387.713568] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713571] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 387.713573] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713576] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 387.713578] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713580] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 387.713583] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713585] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 387.713588] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713590] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 387.713593] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713595] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 387.713598] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713600] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 387.713603] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713605] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 387.713607] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713610] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 387.713612] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713615] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 387.713617] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713620] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713622] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713624] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713886] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 387.718805] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 387.719469] usbcore: registered new interface driver rtl8192cu [ 387.740881] udev[987]: renamed network interface wlan0 to wlan1 [ 462.336237] rtl8192cu: MAC auto ON okay! [ 462.370400] rtl8192cu: Tx queue select: 0x05 [ 462.371173] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin [ 462.774420] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 463.673151] wlan1: direct probe to e0:91:f5:7a:ae:d6 (try 1/3) [ 463.677499] wlan1: direct probe responded [ 463.690120] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 463.708429] wlan1: authenticated [ 463.708461] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1) [ 463.715801] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 status=0 aid=3) [ 463.715808] wlan1: associated [ 463.729553] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 473.761143] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local choice (reason=3) [ 473.811154] cfg80211: All devices are disconnected, going to restore regulatory settings [ 473.811167] cfg80211: Restoring regulatory settings [ 473.811176] cfg80211: Calling CRDA to update world regulatory domain [ 473.824224] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 473.824232] cfg80211: World regulatory domain updated: [ 473.824237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 473.824246] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 473.824254] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 473.824261] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 473.824268] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 473.824275] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 474.240071] wlan1: no IPv6 routers present [ 474.613195] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 474.810080] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2) [ 475.010123] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3) [ 475.014905] wlan1: authenticated [ 475.014939] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1) [ 475.018642] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 status=0 aid=3) [ 475.018650] wlan1: associated [ 485.048496] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local choice (reason=3) [ 485.083634] cfg80211: All devices are disconnected, going to restore regulatory settings [ 485.083644] cfg80211: Restoring regulatory settings [ 485.083653] cfg80211: Calling CRDA to update world regulatory domain [ 485.096588] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 485.096597] cfg80211: World regulatory domain updated: [ 485.096601] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 485.096610] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.096617] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.096625] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.096632] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.096640] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.893367] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 486.092557] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2) [ 486.290075] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3) [ 486.490071] wlan1: authentication with e0:91:f5:7a:ae:d6 timed out ctrl+c wpa_supplicant and starting again: dmesg: [ 387.400102] usb 2-5: new high speed USB device using ehci_hcd and address 3 [ 387.682348] rtl8192cu: MAC address: 00:a1:b0:89:82:1c [ 387.682361] rtl8192cu: Board Type 0 [ 387.713558] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 387.713565] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 387.713568] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713571] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 387.713573] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713576] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 387.713578] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713580] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 387.713583] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713585] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 387.713588] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713590] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 387.713593] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713595] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 387.713598] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713600] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 387.713603] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713605] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 387.713607] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713610] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 387.713612] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713615] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 387.713617] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 387.713620] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713622] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713624] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 387.713886] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 387.718805] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 387.719469] usbcore: registered new interface driver rtl8192cu [ 387.740881] udev[987]: renamed network interface wlan0 to wlan1 [ 462.336237] rtl8192cu: MAC auto ON okay! [ 462.370400] rtl8192cu: Tx queue select: 0x05 [ 462.371173] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin [ 462.774420] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 463.673151] wlan1: direct probe to e0:91:f5:7a:ae:d6 (try 1/3) [ 463.677499] wlan1: direct probe responded [ 463.690120] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 463.708429] wlan1: authenticated [ 463.708461] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1) [ 463.715801] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 status=0 aid=3) [ 463.715808] wlan1: associated [ 463.729553] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 473.761143] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local choice (reason=3) [ 473.811154] cfg80211: All devices are disconnected, going to restore regulatory settings [ 473.811167] cfg80211: Restoring regulatory settings [ 473.811176] cfg80211: Calling CRDA to update world regulatory domain [ 473.824224] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 473.824232] cfg80211: World regulatory domain updated: [ 473.824237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 473.824246] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 473.824254] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 473.824261] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 473.824268] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 473.824275] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 474.240071] wlan1: no IPv6 routers present [ 474.613195] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 474.810080] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2) [ 475.010123] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3) [ 475.014905] wlan1: authenticated [ 475.014939] wlan1: associate with e0:91:f5:7a:ae:d6 (try 1) [ 475.018642] wlan1: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 status=0 aid=3) [ 475.018650] wlan1: associated [ 485.048496] wlan1: deauthenticating from e0:91:f5:7a:ae:d6 by local choice (reason=3) [ 485.083634] cfg80211: All devices are disconnected, going to restore regulatory settings [ 485.083644] cfg80211: Restoring regulatory settings [ 485.083653] cfg80211: Calling CRDA to update world regulatory domain [ 485.096588] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 485.096597] cfg80211: World regulatory domain updated: [ 485.096601] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 485.096610] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.096617] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.096625] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.096632] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.096640] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.893367] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 486.092557] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 2) [ 486.290075] wlan1: authenticate with e0:91:f5:7a:ae:d6 (try 3) [ 486.490071] wlan1: authentication with e0:91:f5:7a:ae:d6 timed out [ 612.790282] rtl8192cu: MAC auto ON okay! [ 612.828665] rtl8192cu: Tx queue select: 0x05 [ 612.829415] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin [ 613.232099] ADDRCONF(NETDEV_UP): wlan1: link is not ready attached wpa_supplicant-ubuntu-maverick_ctrlc.log ################################################################### ubuntu natty ################################################################### ubuntu natty 2.6.38-10.46: dmesg -c after cold boot: plugging in adapter: dmesg: [ 541.820017] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 541.981323] cfg80211: Calling CRDA to update world regulatory domain [ 542.094477] rtl8192cu: MAC address: 00:a1:b0:89:82:1c [ 542.094484] rtl8192cu: Board Type 0 [ 542.102603] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 542.102610] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 542.102615] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102618] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 542.102622] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102625] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 542.102629] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102632] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 542.102636] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102639] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 542.102642] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102646] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 542.102649] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102652] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 542.102656] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102659] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 542.102663] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102666] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 542.102670] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102673] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 542.102677] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102680] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 542.102683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102687] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102690] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102693] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102703] cfg80211: Pending regulatory request, waiting for it to be processed... [ 542.102760] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 542.105689] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 542.106369] usbcore: registered new interface driver rtl8192cu wpa_supplicant -Dnl80211 -dd -c /etc/wpa_supplicant_thuis.conf -f wpa_supplicant.log -iwlan0 wpa_supplicant-ubuntu-natty_cold_boot.log dmesg: [ 541.981323] cfg80211: Calling CRDA to update world regulatory domain [ 542.094477] rtl8192cu: MAC address: 00:a1:b0:89:82:1c [ 542.094484] rtl8192cu: Board Type 0 [ 542.102603] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 542.102610] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 542.102615] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102618] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 542.102622] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102625] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 542.102629] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102632] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 542.102636] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102639] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 542.102642] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102646] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 542.102649] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102652] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 542.102656] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102659] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 542.102663] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102666] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 542.102670] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102673] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 542.102677] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102680] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 542.102683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102687] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102690] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102693] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102703] cfg80211: Pending regulatory request, waiting for it to be processed... [ 542.102760] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 542.105689] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 542.106369] usbcore: registered new interface driver rtl8192cu [ 676.832020] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [ 837.368145] rtl8192cu: MAC auto ON okay! [ 837.400782] rtl8192cu: Tx queue select: 0x05 [ 837.401540] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin [ 837.794521] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 838.635952] wlan0: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 838.640035] wlan0: authenticated [ 838.640211] wlan0: associate with e0:91:f5:7a:ae:d6 (try 1) [ 838.644032] wlan0: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 status=0 aid=4) [ 838.644036] wlan0: associated [ 838.656495] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 838.681561] Intel AES-NI instructions are not detected. [ 838.701438] padlock_aes: VIA PadLock not detected. [ 848.816007] wlan0: no IPv6 routers present ctrl+c wpa_supplicant and starting again: dmesg: [ 541.820017] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 541.981323] cfg80211: Calling CRDA to update world regulatory domain [ 542.094477] rtl8192cu: MAC address: 00:a1:b0:89:82:1c [ 542.094484] rtl8192cu: Board Type 0 [ 542.102603] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 542.102610] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 542.102615] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102618] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 542.102622] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102625] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 542.102629] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102632] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 542.102636] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102639] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 542.102642] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102646] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 542.102649] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102652] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 542.102656] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102659] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 542.102663] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102666] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 542.102670] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102673] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 542.102677] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102680] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 542.102683] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 542.102687] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102690] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102693] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel [ 542.102703] cfg80211: Pending regulatory request, waiting for it to be processed... [ 542.102760] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 542.105689] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 542.106369] usbcore: registered new interface driver rtl8192cu [ 676.832020] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [ 837.368145] rtl8192cu: MAC auto ON okay! [ 837.400782] rtl8192cu: Tx queue select: 0x05 [ 837.401540] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin [ 837.794521] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 838.635952] wlan0: authenticate with e0:91:f5:7a:ae:d6 (try 1) [ 838.640035] wlan0: authenticated [ 838.640211] wlan0: associate with e0:91:f5:7a:ae:d6 (try 1) [ 838.644032] wlan0: RX AssocResp from e0:91:f5:7a:ae:d6 (capab=0x411 status=0 aid=4) [ 838.644036] wlan0: associated [ 838.656495] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 838.681561] Intel AES-NI instructions are not detected. [ 838.701438] padlock_aes: VIA PadLock not detected. [ 848.816007] wlan0: no IPv6 routers present [ 952.783925] wlan0: deauthenticating from e0:91:f5:7a:ae:d6 by local choice (reason=3) [ 952.808221] cfg80211: All devices are disconnected, going to restore regulatory settings [ 952.808225] cfg80211: Restoring regulatory settings [ 952.808231] cfg80211: Calling CRDA for country: US [ 975.889157] rtl8192cu: MAC auto ON okay! [ 975.921798] rtl8192cu: Tx queue select: 0x05 [ 975.922442] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin [ 976.313109] ADDRCONF(NETDEV_UP): wlan0: link is not ready attached wpa_supplicant-ubuntu-maverick_ctrlc.log @@@@@@@@@@@@@@@@@@@@ on 2.6.35 i cannot do a dhcp request but i can on 2.6.38 after ctrl+c both systems are rendered useless On 08/09/2011 06:37 PM, Larry Finger wrote: > On 08/09/2011 10:12 AM, kc@cobradevil.org wrote: >> Hello all, >> >> not sure what is happening but so far i have the following results: >> i downloaded the latest bleeding edge wireless from >> http://wireless.kernel.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2 >> >> I installed kernel headers and build-essentials end run: >> ./scripts/driver-select rtlwifi >> make && make install >> >> i downloaded the firmware from >> http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git >> >> Running on Ubuntu maverick kernel 2.6.35-30 update 56 i get sometimes an >> authenticated message when running wpa_supplicant -Dnl80211 -c >> /etc/wpa_supplicant.conf -i wlan0 but most times it will timeout >> Running on Ubuntu natty kernel 2.6.38-10 update 46 i always get the >> authenticated message when running wpa_supplicant -Dnl80211 -c >> /etc/wpa_supplicant.conf -i wlan0 >> >> only when using dhcp request on two accespoint i get different >> results on the >> natty driver but that has todo with: >> https://bugzilla.kernel.org/show_bug.cgi?id=38012 when applied i can >> connect two >> both accespoints. >> >> Any ideas why it does not work on the maverick kernel? > > How does it work at all with a 2.6.38 kernel? Driver rtl8192cu was not > added to the kernel until 2.6 39. > sorry for not being clear about this but i also compiled the compat tree on this kernel >> Also when stopping the wpa_supplicant with ctrl+c and restart i first >> have to >> replug the device before it tries todo anything with the card. > > What info is in the dmesg output in this case? > > To debug the authentication case, run wpa_supplicant with the "-ddd" > and "-f wpa_supplicant.log" switches. That way you will get a log of > what is going wrong. > > Larry --------------070602050103070004090301 Content-Type: text/x-log; name="wpa_supplicant-ubuntu-maverick_cold_boot.log" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="wpa_supplicant-ubuntu-maverick_cold_boot.log" Initializing interface 'wlan1' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf' Reading configuration file '/etc/wpa_supplicant_thuis.conf' Line: 1 - start of a new network block ssid - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='GIGABIT_1000MBPS2' Initializing interface (2) 'wlan1' SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:a1:b0:89:82:1c wpa_driver_nl80211_set_wpa wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_countermeasures wpa_driver_nl80211_set_drop_unencrypted RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37 WPS: Build Beacon and Probe Response IEs WPS: * Version WPS: * Wi-Fi Protected Setup State (0) WPS: * Version WPS: * Wi-Fi Protected Setup State (0) WPS: * Response Type (2) WPS: * UUID-E WPS: * Manufacturer WPS: * Model Name WPS: * Model Number WPS: * Serial Number WPS: * Primary Device Type WPS: * Device Name WPS: * Config Methods (0) WPS: * RF Bands (3) EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED Added interface wlan1 RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received scan results (0 BSSes) Cached scan results are empty - not posting Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 0 sec 0 usec Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 10 seconds nl80211: Event message available nl80211: New scan results available Received scan results (2 BSSes) New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 selected based on RSN IE selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_nl80211_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_nl80211_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RSN: Ignored PMKID candidate without preauth flag RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b04 len=16 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b1a len=33 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8c08 len=181 AssocResp IE wireless event - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b15 len=24 Wireless event: new AP: e0:91:f5:7a:ae:d6 Association info event resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 State: ASSOCIATING -> ASSOCIATED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6 No keys have been configured - skip key clearing Associated with e0:91:f5:7a:ae:d6 WPA: Association event - clear replay counter WPA: Clear old PTK EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE Setting authentication timeout: 10 sec 0 usec Cancelling scan request RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0c 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b Setting authentication timeout: 10 sec 0 usec IEEE 802.1X RX: version=2 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 0c key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0c 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b State: ASSOCIATED -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: no matching PMKID found WPA: Renewed SNonce - hexdump(len=32): 87 2a 20 06 cb 49 f2 19 7b fe cf 79 5c 30 7b b4 2f 7c 87 5d 52 b7 c5 ce 28 34 0e 22 bf d0 28 bd WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: Sending EAPOL-Key 2/4 WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 0c 87 2a 20 06 cb 49 f2 19 7b fe cf 79 5c 30 7b b4 2f 7c 87 5d 52 b7 c5 ce 28 34 0e 22 bf d0 28 bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 85 7a 29 c4 c3 66 44 3d db d1 07 df d2 61 30 10 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 EAPOL: startWhen --> 0 EAPOL: disable timer tick EAPOL: SUPP_PAE entering state CONNECTING EAPOL: enable timer tick EAPOL: txStart WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0) RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0d 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b IEEE 802.1X RX: version=2 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 0d key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 0d 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: no matching PMKID found WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: Sending EAPOL-Key 2/4 WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 0d 87 2a 20 06 cb 49 f2 19 7b fe cf 79 5c 30 7b b4 2f 7c 87 5d 52 b7 c5 ce 28 34 0e 22 bf d0 28 bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e8 e9 89 d2 c0 5a d2 f0 3a 8b 0a 86 c5 e8 81 ea 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 Authentication with e0:91:f5:7a:ae:d6 timed out. Added BSSID e0:91:f5:7a:ae:d6 into blacklist wpa_driver_nl80211_disassociate No keys have been configured - skip key clearing State: 4WAY_HANDSHAKE -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b15 len=24 Wireless event: new AP: 00:00:00:00:00:00 Added BSSID 00:00:00:00:00:00 into blacklist CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0xa7ae28 key_idx=0 set_tx=0 seq_len=0 key_len=0 addr=00:00:00:00:00:00 nl80211: set_key failed; err=-2 State: DISCONNECTED -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (2 BSSes) New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 selected based on RSN IE selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_nl80211_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_nl80211_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b04 len=16 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b1a len=33 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8c08 len=181 AssocResp IE wireless event - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b15 len=24 Wireless event: new AP: e0:91:f5:7a:ae:d6 Association info event resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 01 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 State: ASSOCIATING -> ASSOCIATED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6 No keys have been configured - skip key clearing Associated with e0:91:f5:7a:ae:d6 WPA: Association event - clear replay counter WPA: Clear old PTK EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE Setting authentication timeout: 10 sec 0 usec Cancelling scan request RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b Setting authentication timeout: 10 sec 0 usec IEEE 802.1X RX: version=2 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 00 key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b State: ASSOCIATED -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: no matching PMKID found WPA: Renewed SNonce - hexdump(len=32): 9d f6 33 cf 7a 53 60 f9 4a b6 f9 5e c5 0d 86 bc ab 26 1c bd 66 b6 9b 03 34 05 3b e8 d1 e1 05 c1 WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: Sending EAPOL-Key 2/4 WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 00 9d f6 33 cf 7a 53 60 f9 4a b6 f9 5e c5 0d 86 bc ab 26 1c bd 66 b6 9b 03 34 05 3b e8 d1 e1 05 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ac 1b ac f5 71 ea cb 56 31 6e 85 5e fb 65 02 8f 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 EAPOL: startWhen --> 0 EAPOL: disable timer tick EAPOL: SUPP_PAE entering state CONNECTING EAPOL: enable timer tick EAPOL: txStart WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0) RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b IEEE 802.1X RX: version=2 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01 key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: no matching PMKID found WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: Sending EAPOL-Key 2/4 WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 9d f6 33 cf 7a 53 60 f9 4a b6 f9 5e c5 0d 86 bc ab 26 1c bd 66 b6 9b 03 34 05 3b e8 d1 e1 05 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5f 5e bc 6d a4 ad 99 48 b4 3d b5 31 b9 75 63 53 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 Authentication with e0:91:f5:7a:ae:d6 timed out. BSSID e0:91:f5:7a:ae:d6 blacklist count incremented to 2 wpa_driver_nl80211_disassociate No keys have been configured - skip key clearing State: 4WAY_HANDSHAKE -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b15 len=24 Wireless event: new AP: 00:00:00:00:00:00 BSSID 00:00:00:00:00:00 blacklist count incremented to 2 CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0xa7ae28 key_idx=0 set_tx=0 seq_len=0 key_len=0 addr=00:00:00:00:00:00 nl80211: set_key failed; err=-2 State: SCANNING -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 nl80211: Event message available nl80211: New scan results available Received scan results (1 BSSes) New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 skip - blacklisted Try to find non-WPA AP 0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 skip - blacklisted No APs found - clear blacklist and try again Removed BSSID 00:00:00:00:00:00 from blacklist (clear) Removed BSSID e0:91:f5:7a:ae:d6 from blacklist (clear) Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 selected based on RSN IE selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_nl80211_set_drop_unencrypted State: DISCONNECTED -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_nl80211_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b04 len=16 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b1a len=33 Authentication with e0:91:f5:7a:ae:d6 timed out. Added BSSID e0:91:f5:7a:ae:d6 into blacklist No keys have been configured - skip key clearing State: ASSOCIATING -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No APs found - clear blacklist and try again Removed BSSID e0:91:f5:7a:ae:d6 from blacklist (clear) Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 CTRL-EVENT-TERMINATING - signal 2 received Removing interface wlan1 No keys have been configured - skip key clearing State: SCANNING -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 wpa_driver_nl80211_set_wpa wpa_driver_nl80211_set_drop_unencrypted wpa_driver_nl80211_set_countermeasures No keys have been configured - skip key clearing Cancelling scan request Cancelling authentication timeout WEXT: Operstate: linkmode=0, operstate=6 --------------070602050103070004090301 Content-Type: text/x-log; name="wpa_supplicant-ubuntu-maverick_ctrlc.log" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="wpa_supplicant-ubuntu-maverick_ctrlc.log" Initializing interface 'wlan1' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf' Reading configuration file '/etc/wpa_supplicant_thuis.conf' Line: 1 - start of a new network block ssid - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='GIGABIT_1000MBPS2' Initializing interface (2) 'wlan1' SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:a1:b0:89:82:1c wpa_driver_nl80211_set_wpa wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=0 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=1 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=2 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x470c3c key_idx=3 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_countermeasures wpa_driver_nl80211_set_drop_unencrypted RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37 WPS: Build Beacon and Probe Response IEs WPS: * Version WPS: * Wi-Fi Protected Setup State (0) WPS: * Version WPS: * Wi-Fi Protected Setup State (0) WPS: * Response Type (2) WPS: * UUID-E WPS: * Manufacturer WPS: * Model Name WPS: * Model Number WPS: * Serial Number WPS: * Primary Device Type WPS: * Device Name WPS: * Config Methods (0) WPS: * RF Bands (3) EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED Added interface wlan1 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 EAPOL: disable timer tick State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received scan results (0 BSSes) Cached scan results are empty - not posting Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 0 sec 0 usec Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added Wireless event: cmd=0x8b19 len=16 CTRL-EVENT-TERMINATING - signal 2 received Removing interface wlan1 No keys have been configured - skip key clearing State: SCANNING -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 wpa_driver_nl80211_set_wpa wpa_driver_nl80211_set_drop_unencrypted wpa_driver_nl80211_set_countermeasures No keys have been configured - skip key clearing Cancelling scan request Cancelling authentication timeout WEXT: Operstate: linkmode=0, operstate=6 --------------070602050103070004090301 Content-Type: text/x-log; name="wpa_supplicant-ubuntu-natty_cold_boot.log" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="wpa_supplicant-ubuntu-natty_cold_boot.log" Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf' Reading configuration file '/etc/wpa_supplicant_thuis.conf' Line: 2 - start of a new network block ssid - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='GIGABIT_1000MBPS2' netlink: Operstate: linkmode=1, operstate=5 Own MAC address: 00:a1:b0:89:82:1c wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0 RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 10 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (3 BSSes) BSS: Start scan result update 1 BSS: Add new id 0 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2' BSS: Add new id 1 BSSID 88:25:2c:bc:be:9b SSID '' BSS: Add new id 2 BSSID 00:22:3f:10:79:38 SSID 'volley' New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 selected based on RSN IE selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0): Cancelling scan request Trying to authenticate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz) No keys have been configured - skip key clearing State: SCANNING -> AUTHENTICATING EAPOL: External notification - EAP success=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - EAP fail=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portControl=Auto EAPOL: Supplicant port status: Unauthorized nl80211: Authenticate (ifindex=3) * bssid=e0:91:f5:7a:ae:d6 * freq=2412 * SSID - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 * IEs - hexdump(len=0): [NULL] * Auth Type 0 nl80211: Authentication request send successfully RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added nl80211: Event message available nl80211: MLME event 37 nl80211: MLME event frame - hexdump(len=41): b0 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 20 0b 00 00 02 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 SME: Authentication response: peer=e0:91:f5:7a:ae:d6 auth_type=0 status_code=0 SME: Authentication response IEs - hexdump(len=11): dd 09 00 10 18 02 02 f0 04 00 00 Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz) State: AUTHENTICATING -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) netlink: Operstate: linkmode=-1, operstate=5 WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 nl80211: Associate (ifindex=3) * bssid=e0:91:f5:7a:ae:d6 * freq=2412 * SSID - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 * IEs - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 nl80211: Association request send successfully nl80211: Event message available nl80211: Ignored unknown event (cmd=19) RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added nl80211: Event message available nl80211: MLME event 38 nl80211: MLME event frame - hexdump(len=195): 10 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 30 0b 11 04 00 00 04 c0 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Association info event resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 freq=2412 MHz FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0): State: ASSOCIATING -> ASSOCIATED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) netlink: Operstate: linkmode=-1, operstate=5 Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6 No keys have been configured - skip key clearing Associated with e0:91:f5:7a:ae:d6 WPA: Association event - clear replay counter WPA: Clear old PTK EAPOL: External notification - portEnabled=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portValid=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - EAP success=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE Setting authentication timeout: 10 sec 0 usec Cancelling scan request nl80211: Event message available nl80211: Ignore connect event (cmd=46) when using userspace SME RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b Setting authentication timeout: 10 sec 0 usec IEEE 802.1X RX: version=2 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 00 key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 00 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b State: ASSOCIATED -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: no matching PMKID found WPA: Renewed SNonce - hexdump(len=32): 37 6d db 0e b3 52 09 45 bc 9f 4c 55 eb 55 b3 e1 1a 84 5d 49 a8 62 c6 9f cd c8 ef 4b 31 53 42 2a WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: Sending EAPOL-Key 2/4 WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 00 37 6d db 0e b3 52 09 45 bc 9f 4c 55 eb 55 b3 e1 1a 84 5d 49 a8 62 c6 9f cd c8 ef 4b 31 53 42 2a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 8b 16 3f ec 5d 74 14 48 41 38 88 2e f3 14 ad 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 df 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d4 db 32 c3 c2 99 b3 75 1f e5 72 83 ef d1 b6 e2 00 38 bf 0a a4 da 23 5f bc 27 50 80 9f 44 8d 4c 87 4a 84 82 af 57 0e 8f 81 20 a7 6a e3 39 96 e7 1b 26 08 33 c2 34 4e e6 7c 06 ea 96 f3 28 8f bf 0c 37 ea 56 0a 8d 09 31 24 42 IEEE 802.1X RX: version=2 type=3 length=151 EAPOL-Key type=2 key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr) key_length=16 key_data_length=56 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01 key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 key_iv - hexdump(len=16): 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 key_rsc - hexdump(len=8): df 05 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): d4 db 32 c3 c2 99 b3 75 1f e5 72 83 ef d1 b6 e2 WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d8 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 df 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d4 db 32 c3 c2 99 b3 75 1f e5 72 83 ef d1 b6 e2 00 38 bf 0a a4 da 23 5f bc 27 50 80 9f 44 8d 4c 87 4a 84 82 af 57 0e 8f 81 20 a7 6a e3 39 96 e7 1b 26 08 33 c2 34 4e e6 7c 06 ea 96 f3 28 8f bf 0c 37 ea 56 0a 8d 09 31 24 42 RSN: encrypted key data - hexdump(len=56): bf 0a a4 da 23 5f bc 27 50 80 9f 44 8d 4c 87 4a 84 82 af 57 0e 8f 81 20 a7 6a e3 39 96 e7 1b 26 08 33 c2 34 4e e6 7c 06 ea 96 f3 28 8f bf 0c 37 ea 56 0a 8d 09 31 24 42 WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED] State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE WPA: RX message 3 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 29 6f 09 48 2c 45 02 3f c9 0f a2 8d 42 22 52 3d dd 00 WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED] WPA: Sending EAPOL-Key 4/4 WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 66 c3 21 19 a3 e0 db fe 3d 27 97 e9 1a 39 9d 89 00 00 WPA: Installing PTK to the driver. wpa_driver_nl80211_set_key: ifindex=3 alg=3 addr=0x9efd1a0 key_idx=0 set_tx=1 seq_len=6 key_len=16 addr=e0:91:f5:7a:ae:d6 EAPOL: External notification - portValid=1 State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED] WPA: Group Key - hexdump(len=16): [REMOVED] WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16). WPA: RSC - hexdump(len=6): df 05 00 00 00 00 wpa_driver_nl80211_set_key: ifindex=3 alg=3 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=6 key_len=16 WPA: Key negotiation completed with e0:91:f5:7a:ae:d6 [PTK=CCMP GTK=CCMP] Cancelling authentication timeout State: GROUP_HANDSHAKE -> COMPLETED CTRL-EVENT-CONNECTED - Connection to e0:91:f5:7a:ae:d6 completed (auth) [id=0 id_str=] wpa_driver_nl80211_set_operstate: operstate 0->1 (UP) netlink: Operstate: linkmode=-1, operstate=6 EAPOL: External notification - portValid=1 EAPOL: External notification - EAP success=1 EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state SUCCESS EAP: EAP entering state DISABLED EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: Supplicant port status: Authorized EAPOL: SUPP_BE entering state IDLE EAPOL authentication completed successfully RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added EAPOL: startWhen --> 0 EAPOL: disable timer tick CTRL-EVENT-TERMINATING - signal 2 received Removing interface wlan0 wpa_driver_nl80211_deauthenticate wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x9efa844 key_idx=0 set_tx=0 seq_len=0 key_len=0 addr=e0:91:f5:7a:ae:d6 State: COMPLETED -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 1->0 (DORMANT) netlink: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: SUPP_BE entering state INITIALIZE EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portValid=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - EAP success=0 EAPOL: Supplicant port status: Unauthorized No keys have been configured - skip key clearing BSS: Remove id 0 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2' BSS: Remove id 1 BSSID 88:25:2c:bc:be:9b SSID '' BSS: Remove id 2 BSSID 00:22:3f:10:79:38 SSID 'volley' Cancelling scan request Cancelling authentication timeout netlink: Operstate: linkmode=0, operstate=6 --------------070602050103070004090301 Content-Type: text/x-log; name="wpa_supplicant-ubuntu-natty_ctrlc.log" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="wpa_supplicant-ubuntu-natty_ctrlc.log" Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf' Reading configuration file '/etc/wpa_supplicant_thuis.conf' Line: 2 - start of a new network block ssid - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='GIGABIT_1000MBPS2' netlink: Operstate: linkmode=1, operstate=5 Own MAC address: 00:a1:b0:89:82:1c wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=3 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0 RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 10 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 1 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec EAPOL: disable timer tick EAPOL: Supplicant port status: Unauthorized RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 2 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 3 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 4 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 5 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added CTRL-EVENT-TERMINATING - signal 2 received Removing interface wlan0 No keys have been configured - skip key clearing State: SCANNING -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) netlink: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portValid=0 EAPOL: Supplicant port status: Unauthorized No keys have been configured - skip key clearing Cancelling scan request Cancelling authentication timeout netlink: Operstate: linkmode=0, operstate=6 Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf' Reading configuration file '/etc/wpa_supplicant_thuis.conf' Line: 2 - start of a new network block ssid - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='GIGABIT_1000MBPS2' netlink: Operstate: linkmode=1, operstate=5 Own MAC address: 00:a1:b0:89:82:1c wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0 RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1043 ([UP][RUNNING]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 10 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (2 BSSes) BSS: Start scan result update 1 BSS: Add new id 0 BSSID 00:22:3f:10:79:38 SSID 'volley' BSS: Add new id 1 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2' New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1041 len=1 WPS: attr type=0x103b len=1 WPS: attr type=0x1047 len=16 WPS: attr type=0x1021 len=13 WPS: attr type=0x1023 len=8 WPS: attr type=0x1024 len=8 WPS: attr type=0x1042 len=4 WPS: attr type=0x1054 len=8 WPS: attr type=0x1011 len=8 WPS: attr type=0x1008 len=2 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:22:3f:10:79:38 ssid='volley' wpa_ie_len=24 rsn_ie_len=0 caps=0x411 skip - SSID mismatch 1: e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 selected based on RSN IE selected WPA AP e0:91:f5:7a:ae:d6 ssid='GIGABIT_1000MBPS2' Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 WPA: using GTK CCMP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0): Cancelling scan request Trying to authenticate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz) No keys have been configured - skip key clearing State: SCANNING -> AUTHENTICATING EAPOL: External notification - EAP success=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - EAP fail=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portControl=Auto EAPOL: Supplicant port status: Unauthorized nl80211: Authenticate (ifindex=4) * bssid=e0:91:f5:7a:ae:d6 * freq=2412 * SSID - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 * IEs - hexdump(len=0): [NULL] * Auth Type 0 nl80211: Authentication request send successfully RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added nl80211: Event message available nl80211: MLME event 37 nl80211: MLME event frame - hexdump(len=41): b0 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 90 05 00 00 02 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 SME: Authentication response: peer=e0:91:f5:7a:ae:d6 auth_type=0 status_code=0 SME: Authentication response IEs - hexdump(len=11): dd 09 00 10 18 02 02 f0 04 00 00 Trying to associate with e0:91:f5:7a:ae:d6 (SSID='GIGABIT_1000MBPS2' freq=2412 MHz) State: AUTHENTICATING -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) netlink: Operstate: linkmode=-1, operstate=5 WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 nl80211: Associate (ifindex=4) * bssid=e0:91:f5:7a:ae:d6 * freq=2412 * SSID - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 * IEs - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 nl80211: Association request send successfully nl80211: Event message available nl80211: Ignored unknown event (cmd=19) RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added nl80211: Event message available nl80211: MLME event 38 nl80211: MLME event frame - hexdump(len=195): 10 00 3a 01 00 a1 b0 89 82 1c e0 91 f5 7a ae d6 e0 91 f5 7a ae d6 a0 05 11 04 00 00 04 c0 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Association info event resp_ies - hexdump(len=165): 01 08 82 84 0b 16 24 30 48 6c 32 04 0c 12 18 60 2d 1a 7e 18 1b ff 00 00 00 01 00 00 00 00 00 96 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 09 00 10 18 02 02 f0 04 00 00 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 1e 00 90 4c 33 7e 18 1b ff 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dd 1a 00 90 4c 34 01 0d 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 freq=2412 MHz FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0): State: ASSOCIATING -> ASSOCIATED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) netlink: Operstate: linkmode=-1, operstate=5 Associated to a new BSS: BSSID=e0:91:f5:7a:ae:d6 No keys have been configured - skip key clearing Associated with e0:91:f5:7a:ae:d6 WPA: Association event - clear replay counter WPA: Clear old PTK EAPOL: External notification - portEnabled=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portValid=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - EAP success=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE Setting authentication timeout: 10 sec 0 usec Cancelling scan request nl80211: Event message available nl80211: Ignore connect event (cmd=46) when using userspace SME RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b Setting authentication timeout: 10 sec 0 usec IEEE 802.1X RX: version=2 type=3 length=117 EAPOL-Key type=2 key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack) key_length=16 key_data_length=22 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01 key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WPA: RX EAPOL-Key - hexdump(len=121): 02 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b State: ASSOCIATED -> 4WAY_HANDSHAKE WPA: RX message 1 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: PMKID from Authenticator - hexdump(len=16): 82 90 f9 f8 bf b8 00 da 47 ce 80 66 3d 01 4d 6b RSN: no matching PMKID found WPA: Renewed SNonce - hexdump(len=32): 22 fb 6b 50 8a f1 88 da 51 f2 eb 61 72 a4 b1 a1 ea 21 a6 6d 6d 1a 88 8c 25 64 05 31 5b f3 1d bf WPA: PTK derivation - A1=00:a1:b0:89:82:1c A2=e0:91:f5:7a:ae:d6 WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 WPA: Sending EAPOL-Key 2/4 WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 22 fb 6b 50 8a f1 88 da 51 f2 eb 61 72 a4 b1 a1 ea 21 a6 6d 6d 1a 88 8c 25 64 05 31 5b f3 1d bf 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c6 b4 77 1f 95 a5 d0 eb f9 fc 57 66 69 1b 51 d8 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 RX EAPOL from e0:91:f5:7a:ae:d6 RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 da e5 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ef 49 73 34 23 25 10 e8 bb 38 f4 d5 13 8a 74 e4 00 38 f6 87 7e d1 67 ed 93 8b 58 c2 67 4e f8 78 13 fa a1 33 94 f5 95 55 a4 f2 53 9e 6a e2 4c 29 a8 76 da 05 20 d3 02 3b 80 1a c1 0c f7 e6 aa 27 45 1c 9c 6b 6c a8 29 30 af 37 IEEE 802.1X RX: version=2 type=3 length=151 EAPOL-Key type=2 key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr) key_length=16 key_data_length=56 replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02 key_nonce - hexdump(len=32): 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 key_iv - hexdump(len=16): 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 da key_rsc - hexdump(len=8): e5 05 00 00 00 00 00 00 key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00 key_mic - hexdump(len=16): ef 49 73 34 23 25 10 e8 bb 38 f4 d5 13 8a 74 e4 WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 18 dc b4 aa 7f dd 61 85 06 b5 21 4e 03 78 ee 93 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 d9 7a cd 10 95 03 ef 09 78 ee 6e ba eb 7f 82 04 da e5 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ef 49 73 34 23 25 10 e8 bb 38 f4 d5 13 8a 74 e4 00 38 f6 87 7e d1 67 ed 93 8b 58 c2 67 4e f8 78 13 fa a1 33 94 f5 95 55 a4 f2 53 9e 6a e2 4c 29 a8 76 da 05 20 d3 02 3b 80 1a c1 0c f7 e6 aa 27 45 1c 9c 6b 6c a8 29 30 af 37 RSN: encrypted key data - hexdump(len=56): f6 87 7e d1 67 ed 93 8b 58 c2 67 4e f8 78 13 fa a1 33 94 f5 95 55 a4 f2 53 9e 6a e2 4c 29 a8 76 da 05 20 d3 02 3b 80 1a c1 0c f7 e6 aa 27 45 1c 9c 6b 6c a8 29 30 af 37 WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED] State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE WPA: RX message 3 of 4-Way Handshake from e0:91:f5:7a:ae:d6 (ver=2) WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 29 6f 09 48 2c 45 02 3f c9 0f a2 8d 42 22 52 3d dd 00 WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED] WPA: Sending EAPOL-Key 4/4 WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f6 32 87 f4 77 44 79 37 c8 79 e6 3b 23 9f f9 74 00 00 WPA: Installing PTK to the driver. wpa_driver_nl80211_set_key: ifindex=4 alg=3 addr=0x99151a0 key_idx=0 set_tx=1 seq_len=6 key_len=16 addr=e0:91:f5:7a:ae:d6 EAPOL: External notification - portValid=1 State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED] WPA: Group Key - hexdump(len=16): [REMOVED] WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16). WPA: RSC - hexdump(len=6): e5 05 00 00 00 00 wpa_driver_nl80211_set_key: ifindex=4 alg=3 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=6 key_len=16 WPA: Key negotiation completed with e0:91:f5:7a:ae:d6 [PTK=CCMP GTK=CCMP] Cancelling authentication timeout State: GROUP_HANDSHAKE -> COMPLETED CTRL-EVENT-CONNECTED - Connection to e0:91:f5:7a:ae:d6 completed (auth) [id=0 id_str=] wpa_driver_nl80211_set_operstate: operstate 0->1 (UP) netlink: Operstate: linkmode=-1, operstate=6 EAPOL: External notification - portValid=1 EAPOL: External notification - EAP success=1 EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state SUCCESS EAP: EAP entering state DISABLED EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: Supplicant port status: Authorized EAPOL: SUPP_BE entering state IDLE EAPOL authentication completed successfully RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added EAPOL: startWhen --> 0 EAPOL: disable timer tick BSS: Expire BSS 0 due to age BSS: Remove id 0 BSSID 00:22:3f:10:79:38 SSID 'volley' CTRL-EVENT-TERMINATING - signal 2 received Removing interface wlan0 wpa_driver_nl80211_deauthenticate wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x9912844 key_idx=0 set_tx=0 seq_len=0 key_len=0 addr=e0:91:f5:7a:ae:d6 State: COMPLETED -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 1->0 (DORMANT) netlink: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: SUPP_BE entering state INITIALIZE EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - portValid=0 EAPOL: Supplicant port status: Unauthorized EAPOL: External notification - EAP success=0 EAPOL: Supplicant port status: Unauthorized No keys have been configured - skip key clearing BSS: Remove id 1 BSSID e0:91:f5:7a:ae:d6 SSID 'GIGABIT_1000MBPS2' Cancelling scan request Cancelling authentication timeout netlink: Operstate: linkmode=0, operstate=6 Initializing interface 'wlan0' conf '/etc/wpa_supplicant_thuis.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant_thuis.conf' -> '/etc/wpa_supplicant_thuis.conf' Reading configuration file '/etc/wpa_supplicant_thuis.conf' Line: 2 - start of a new network block ssid - hexdump_ascii(len=17): 47 49 47 41 42 49 54 5f 31 30 30 30 4d 42 50 53 GIGABIT_1000MBPS 32 2 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='GIGABIT_1000MBPS2' netlink: Operstate: linkmode=1, operstate=5 Own MAC address: 00:a1:b0:89:82:1c wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=0x80e15fc key_idx=3 set_tx=0 seq_len=0 key_len=0 RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): cc d9 84 e5 b6 62 52 37 80 44 2a 54 bb b0 e0 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 10 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 1 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added EAPOL: disable timer tick EAPOL: Supplicant port status: Unauthorized Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 2 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 3 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 4 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 5 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Starting AP scan for wildcard SSID nl80211: Scan SSID - hexdump_ascii(len=0): [NULL] Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: Scan trigger nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) BSS: Start scan result update 6 New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable network found Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added --------------070602050103070004090301--