Return-path: Received: from mail-fx0-f46.google.com ([209.85.161.46]:44514 "EHLO mail-fx0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751105Ab1I1LNE (ORCPT ); Wed, 28 Sep 2011 07:13:04 -0400 Received: by fxe4 with SMTP id 4so428931fxe.19 for ; Wed, 28 Sep 2011 04:13:02 -0700 (PDT) From: Arik Nemtsov To: Cc: Kalyan C Gaddam , Arik Nemtsov Subject: [PATCH v3 1/5] nl80211: support sending TDLS commands/frames Date: Wed, 28 Sep 2011 14:12:50 +0300 Message-Id: <1317208374-19286-1-git-send-email-arik@wizery.com> (sfid-20110928_131318_186093_04470FDF) Sender: linux-wireless-owner@vger.kernel.org List-ID: Add support for sending high-level TDLS commands and TDLS frames via NL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add appropriate cfg80211 callbacks for lower level drivers. Add wiphy capability flags for TDLS support and advertise them via nl80211. Signed-off-by: Arik Nemtsov Cc: Kalyan C Gaddam --- v3: rebased on wireless-testing include/linux/nl80211.h | 42 ++++++++++++++++++++++++ include/net/cfg80211.h | 17 ++++++++++ net/wireless/nl80211.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 139 insertions(+), 1 deletions(-) diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c73582f..a5ab23d 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -506,6 +506,9 @@ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace * of PMKSA caching dandidates. * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -632,6 +635,9 @@ enum nl80211_commands { NL80211_CMD_PMKSA_CANDIDATE, + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1089,6 +1095,20 @@ enum nl80211_commands { * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and * %NL80211_CMD_FRAME commands. * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1311,6 +1331,12 @@ enum nl80211_attrs { NL80211_ATTR_TX_NO_CCK_RATE, + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2604,4 +2630,20 @@ enum nl80211_pmksa_candidate_attr { MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 }; +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 31d823a..98b8b66 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1410,6 +1410,9 @@ struct cfg80211_gtk_rekey_data { * @set_ringparam: Set tx and rx ring sizes. * * @get_ringparam: Get tx and rx ring current and maximum sizes. + * + * @tdls_mgmt: Transmit a TDLS management frame. + * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -1593,6 +1596,12 @@ struct cfg80211_ops { int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_gtk_rekey_data *data); + + int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, u8 action_code, u8 dialog_token, + u16 status_code, const u8 *buf, size_t len); + int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, + u8 *peer, enum nl80211_tdls_operation oper); }; /* @@ -1645,6 +1654,12 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the * firmware. * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. + * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. + * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) + * link setup/discovery operations internally. Setup, discovery and + * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT + * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be + * used for asking the driver/firmware to perform a TDLS operation. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -1661,6 +1676,8 @@ enum wiphy_flags { WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12), WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), WIPHY_FLAG_AP_UAPSD = BIT(14), + WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), + WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b850757..235b77a 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -192,6 +192,11 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_ROAM_SUPPORT] = { .type = NLA_FLAG }, [NL80211_ATTR_SCHED_SCAN_MATCH] = { .type = NLA_NESTED }, [NL80211_ATTR_TX_NO_CCK_RATE] = { .type = NLA_FLAG }, + [NL80211_ATTR_TDLS_ACTION] = { .type = NLA_U8 }, + [NL80211_ATTR_TDLS_DIALOG_TOKEN] = { .type = NLA_U8 }, + [NL80211_ATTR_TDLS_OPERATION] = { .type = NLA_U8 }, + [NL80211_ATTR_TDLS_SUPPORT] = { .type = NLA_FLAG }, + [NL80211_ATTR_TDLS_EXTERNAL_SETUP] = { .type = NLA_FLAG }, }; /* policy for the key attributes */ @@ -732,9 +737,12 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_MESH_AUTH); if (dev->wiphy.flags & WIPHY_FLAG_AP_UAPSD) NLA_PUT_FLAG(msg, NL80211_ATTR_SUPPORT_AP_UAPSD); - if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_FW_ROAM) NLA_PUT_FLAG(msg, NL80211_ATTR_ROAM_SUPPORT); + if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) + NLA_PUT_FLAG(msg, NL80211_ATTR_TDLS_SUPPORT); + if (dev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP) + NLA_PUT_FLAG(msg, NL80211_ATTR_TDLS_EXTERNAL_SETUP); NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES, sizeof(u32) * dev->wiphy.n_cipher_suites, @@ -877,6 +885,10 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, } CMD(set_channel, SET_CHANNEL); CMD(set_wds_peer, SET_WDS_PEER); + if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) { + CMD(tdls_mgmt, TDLS_MGMT); + CMD(tdls_oper, TDLS_OPER); + } if (dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) CMD(sched_scan_start, START_SCHED_SCAN); @@ -4964,6 +4976,57 @@ static int nl80211_flush_pmksa(struct sk_buff *skb, struct genl_info *info) return rdev->ops->flush_pmksa(&rdev->wiphy, dev); } +static int nl80211_tdls_mgmt(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + u8 action_code, dialog_token; + u16 status_code; + u8 *peer; + + if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) || + !rdev->ops->tdls_mgmt) + return -EOPNOTSUPP; + + if (!info->attrs[NL80211_ATTR_TDLS_ACTION] || + !info->attrs[NL80211_ATTR_STATUS_CODE] || + !info->attrs[NL80211_ATTR_TDLS_DIALOG_TOKEN] || + !info->attrs[NL80211_ATTR_IE] || + !info->attrs[NL80211_ATTR_MAC]) + return -EINVAL; + + peer = nla_data(info->attrs[NL80211_ATTR_MAC]); + action_code = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_ACTION]); + status_code = nla_get_u16(info->attrs[NL80211_ATTR_STATUS_CODE]); + dialog_token = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_DIALOG_TOKEN]); + + return rdev->ops->tdls_mgmt(&rdev->wiphy, dev, peer, action_code, + dialog_token, status_code, + nla_data(info->attrs[NL80211_ATTR_IE]), + nla_len(info->attrs[NL80211_ATTR_IE])); +} + +static int nl80211_tdls_oper(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + enum nl80211_tdls_operation operation; + u8 *peer; + + if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS) || + !rdev->ops->tdls_oper) + return -EOPNOTSUPP; + + if (!info->attrs[NL80211_ATTR_TDLS_OPERATION] || + !info->attrs[NL80211_ATTR_MAC]) + return -EINVAL; + + operation = nla_get_u8(info->attrs[NL80211_ATTR_TDLS_OPERATION]); + peer = nla_data(info->attrs[NL80211_ATTR_MAC]); + + return rdev->ops->tdls_oper(&rdev->wiphy, dev, peer, operation); +} + static int nl80211_remain_on_channel(struct sk_buff *skb, struct genl_info *info) { @@ -6279,6 +6342,22 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_TDLS_MGMT, + .doit = nl80211_tdls_mgmt, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, + { + .cmd = NL80211_CMD_TDLS_OPER, + .doit = nl80211_tdls_oper, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { -- 1.7.4.1