Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:42346 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755747Ab1INJjs (ORCPT ); Wed, 14 Sep 2011 05:39:48 -0400 From: Mohammed Shafi Shajakhan To: CC: , , , , Mohammed Shafi Shajakhan Subject: [PATCH 2/2] ath9k: Fix PS wrappers and enabling LED Date: Wed, 14 Sep 2011 15:09:40 +0530 Message-ID: <1315993180-14343-1-git-send-email-mohammed@qca.qualcomm.com> (sfid-20110914_113951_723318_42AB4F84) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Mohammed Shafi Shajakhan in ath_pci_resume it seems we are not enabling LED properly, in addition we have a PS wrapper fix for this Signed-off-by: Mohammed Shafi Shajakhan --- drivers/net/wireless/ath/ath9k/pci.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index bda2233..d67d6ee 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -333,16 +333,16 @@ static int ath_pci_resume(struct device *device) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + ath9k_ps_wakeup(sc); /* Enable LED */ ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin, AR_GPIO_OUTPUT_MUX_AS_OUTPUT); - ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); + ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0); /* * Reset key cache to sane defaults (all entries cleared) instead of * semi-random values after suspend/resume. */ - ath9k_ps_wakeup(sc); ath9k_cmn_init_crypto(sc->sc_ah); ath9k_ps_restore(sc); -- 1.7.0.4