Return-path: Received: from bsmtp4.bon.at ([195.3.86.186]:59464 "EHLO bsmtp.bon.at" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752280Ab1JVHVr (ORCPT ); Sat, 22 Oct 2011 03:21:47 -0400 Date: Sat, 22 Oct 2011 09:22:15 +0200 From: Clemens Buchacher To: Adrian Chadd Cc: Mohammed Shafi , linux-wireless@vger.kernel.org, ath9k-devel Subject: Re: ath9k: irq storm after suspend/resume Message-ID: <20111022072215.GA2524@ecki> (sfid-20111022_092151_109136_09821BFC) References: <20111015093902.GA23520@ecki> <20111018064459.GA1442@ecki> <20111021102221.GA1463@ecki.lan> <20111021202038.GA1523@ecki.lan> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi, On Sat, Oct 22, 2011 at 08:47:33AM +0800, Adrian Chadd wrote: > > At this point I'd really suggest whacking other devices into the slot > to see if they generate the same kind of behaviour. Looks like you had it right from the start. After unloading the jme module [*1*] I cannot reproduce the IRQ storm any more. From looking at dmesg it should have been obvious, since it also gets IRQ 17 assigned. I don't know how I missed that, I was sure I had checked. Sorry guys, for most likely wasting your time. And thanks for your patience. Best, Clemens [*1*] $ lspci 06:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03)) $ dmesg|grep -i jme [ 6.160187] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 6.160278] jme 0000:06:00.5: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.160305] jme 0000:06:00.5: setting latency timer to 64 [ 6.161154] jme 0000:06:00.5: eth0: JMC250 Gigabit Ethernet chiprev:23 pcirev:3 macaddr:bc:ae:c5:2f:91:47 [ 18.354697] jme 0000:06:00.5: PCI INT A disabled