Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:53201 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751993Ab1KOGGp (ORCPT ); Tue, 15 Nov 2011 01:06:45 -0500 From: Mohammed Shafi Shajakhan To: , CC: Balasubramanian senthilkumar , Mohammed Shafi Shajakhan Subject: [RFC 15/18] ath9k_hw: Add MCI related changes in chip reset Date: Tue, 15 Nov 2011 11:35:27 +0530 Message-ID: <1321337127-12917-1-git-send-email-mohammed@qca.qualcomm.com> (sfid-20111115_070650_284859_1BC7646F) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Mohammed Shafi Shajakhan here we check for BT state and if BT calibration has started, give 25ms for BT Calibration to finish. we also take care of 2G/5G switch and LNA transfer incase WLAN is operating in 5G. in case the BT state is awake when we do WLAN calibration re-calibrate and we reset the message exchange between WLAN and BT. BT is given preference when simultaneous CAL request happens. calibration for WLAN/BT is done assuming that the other co-existing module is in awake state, if not we continue to do calibration while if the other module's state changes we need to do restart the calibration handshake Signed-off-by: Mohammed Shafi Shajakhan --- drivers/net/wireless/ath/ath9k/hw.c | 132 +++++++++++++++++++++++++++++++++++ 1 files changed, 132 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 1d71d1b..e2860d7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1514,6 +1514,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, struct ath9k_hw_cal_data *caldata, bool bChannelChange) { struct ath_common *common = ath9k_hw_common(ah); + struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci; u32 saveLedState; struct ath9k_channel *curchan = ah->curchan; u32 saveDefAntenna; @@ -1521,6 +1522,53 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, u64 tsf = 0; int i, r; bool allow_fbs = false; + bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI); + bool save_fullsleep = ah->chip_fullsleep; + + if (mci) { + + ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan)); + + if (mci_hw->bt_state == MCI_BT_CAL_START) { + u32 payload[4] = {0, 0, 0, 0}; + + ath_dbg(common, ATH_DBG_MCI, "MCI stop rx for BT CAL"); + + mci_hw->bt_state = MCI_BT_CAL; + + /* + * MCI FIX: disable mci interrupt here. This is to avoid + * SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and + * lead to mci_intr reentry. + */ + + ar9003_mci_disable_interrupt(ah); + + ath_dbg(common, ATH_DBG_MCI, "send WLAN_CAL_GRANT"); + MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT); + ar9003_mci_send_message(ah, MCI_GPM, 0, payload, + 16, true, false); + + ath_dbg(common, ATH_DBG_MCI, "\nMCI BT is calibrating"); + + /* Wait BT calibration to be completed for 25ms */ + + if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE, + 0, 25000)) + ath_dbg(common, ATH_DBG_MCI, + "MCI got BT_CAL_DONE\n"); + else + ath_dbg(common, ATH_DBG_MCI, + "MCI ### BT cal takes to long, force" + "bt_state to be bt_awake\n"); + mci_hw->bt_state = MCI_BT_AWAKE; + /* MCI FIX: enable mci interrupt here */ + ar9003_mci_enable_interrupt(ah); + + return true; + } + } + if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) return -EIO; @@ -1558,12 +1606,29 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ath9k_hw_channel_change(ah, chan)) { ath9k_hw_loadnf(ah, ah->curchan); ath9k_hw_start_nfcal(ah, true); + if (mci && mci_hw->ready) + ar9003_mci_2g5g_switch(ah, true); + if (AR_SREV_9271(ah)) ar9002_hw_load_ani_reg(ah, chan); return 0; } } + if (mci) { + ar9003_mci_disable_interrupt(ah); + + if (mci_hw->ready && !save_fullsleep) { + ar9003_mci_mute_bt(ah); + udelay(20); + REG_WRITE(ah, AR_BTCOEX_CTRL, 0); + } + + mci_hw->bt_state = MCI_BT_SLEEP; + mci_hw->ready = false; + } + + saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA); if (saveDefAntenna == 0) saveDefAntenna = 1; @@ -1619,6 +1684,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (r) return r; + if (mci) + ar9003_mci_reset(ah, false, IS_CHAN_2GHZ(chan), save_fullsleep); + /* * Some AR91xx SoC devices frequently fail to accept TSF writes * right after the chip reset. When that happens, write a new @@ -1736,6 +1804,55 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ath9k_hw_loadnf(ah, chan); ath9k_hw_start_nfcal(ah, true); + if (mci && mci_hw->ready) { + + if (IS_CHAN_2GHZ(chan) && + (mci_hw->bt_state == MCI_BT_SLEEP)) { + + if (ar9003_mci_check_int(ah, + AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) || + ar9003_mci_check_int(ah, + AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) { + + /* + * BT is sleeping. Check if BT wakes up during + * WLAN calibration. If BT wakes up during + * WLAN calibration, need to go through all + * message exchanges again and recal. + */ + + ath_dbg(common, ATH_DBG_MCI, "MCI BT wakes up" + "during WLAN calibration\n"); + + REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW, + AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET | + AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE); + ath_dbg(common, ATH_DBG_MCI, "MCI send" + "REMOTE_RESET\n"); + ar9003_mci_remote_reset(ah, true); + ar9003_mci_send_sys_waking(ah, true); + udelay(1); + if (IS_CHAN_2GHZ(chan)) + ar9003_mci_send_lna_transfer(ah, true); + + mci_hw->bt_state = MCI_BT_AWAKE; + + ath_dbg(common, ATH_DBG_MCI, "MCI re-cal\n"); + + if (caldata) { + caldata->done_txiqcal_once = false; + caldata->done_txclcal_once = false; + caldata->rtt_hist.num_readings = 0; + } + + if (!ath9k_hw_init_cal(ah, chan)) + return -EIO; + + } + } + ar9003_mci_enable_interrupt(ah); + } + ENABLE_REGWRITE_BUFFER(ah); ath9k_hw_restore_chainmask(ah); @@ -1778,6 +1895,21 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ah->btcoex_hw.enabled) ath9k_hw_btcoex_enable(ah); + if (mci && mci_hw->ready) { + /* + * check BT state again to make + * sure it's not changed. + */ + + ar9003_mci_sync_bt_state(ah); + ar9003_mci_2g5g_switch(ah, true); + + if ((mci_hw->bt_state == MCI_BT_AWAKE) && + (mci_hw->query_bt == true)) { + mci_hw->need_flush_btinfo = true; + } + } + if (AR_SREV_9300_20_OR_LATER(ah)) { ar9003_hw_bb_watchdog_config(ah); -- 1.7.0.4