Return-path: Received: from mx1.redhat.com ([209.132.183.28]:62837 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756682Ab1KRIWV (ORCPT ); Fri, 18 Nov 2011 03:22:21 -0500 Received: from int-mx01.intmail.prod.int.phx2.redhat.com (int-mx01.intmail.prod.int.phx2.redhat.com [10.5.11.11]) by mx1.redhat.com (8.14.4/8.14.4) with ESMTP id pAI8MKLe032385 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for ; Fri, 18 Nov 2011 03:22:20 -0500 From: Stanislaw Gruszka To: linux-wireless@vger.kernel.org Cc: Stanislaw Gruszka Subject: [PATCH 41/77] iwlegacy: s/STATUS_/S_/ Date: Fri, 18 Nov 2011 09:22:03 +0100 Message-Id: <1321604559-10707-41-git-send-email-sgruszka@redhat.com> (sfid-20111118_092229_270127_C8D2B452) In-Reply-To: <1321604559-10707-1-git-send-email-sgruszka@redhat.com> References: <1321604559-10707-1-git-send-email-sgruszka@redhat.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Stanislaw Gruszka --- drivers/net/wireless/iwlegacy/3945-mac.c | 98 ++++++++++---------- drivers/net/wireless/iwlegacy/3945.c | 10 +- drivers/net/wireless/iwlegacy/4965-mac.c | 134 +++++++++++++------------- drivers/net/wireless/iwlegacy/4965.c | 18 ++-- drivers/net/wireless/iwlegacy/iwl-core.c | 40 ++++---- drivers/net/wireless/iwlegacy/iwl-core.h | 50 +++++----- drivers/net/wireless/iwlegacy/iwl-debugfs.c | 66 +++++++------- drivers/net/wireless/iwlegacy/iwl-hcmd.c | 14 ++-- drivers/net/wireless/iwlegacy/iwl-helpers.h | 4 +- drivers/net/wireless/iwlegacy/iwl-led.c | 2 +- drivers/net/wireless/iwlegacy/iwl-power.c | 6 +- drivers/net/wireless/iwlegacy/iwl-rx.c | 2 +- drivers/net/wireless/iwlegacy/iwl-scan.c | 42 ++++---- drivers/net/wireless/iwlegacy/iwl-tx.c | 4 +- 14 files changed, 245 insertions(+), 245 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 17edbdf..f69211e 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -827,17 +827,17 @@ static void il3945_rx_card_state_notif(struct il_priv *il, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); else - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); il_scan_cancel(il); - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &il->status))) + if ((test_bit(S_RF_KILL_HW, &status) != + test_bit(S_RF_KILL_HW, &il->status))) wiphy_rfkill_set_hw_state(il->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &il->status)); + test_bit(S_RF_KILL_HW, &il->status)); else wake_up(&il->wait_command_queue); } @@ -1537,7 +1537,7 @@ static void il3945_irq_tasklet(struct il_priv *il) /* Re-enable all interrupts */ /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &il->status)) + if (test_bit(S_INT_ENABLED, &il->status)) il_enable_interrupts(il); #ifdef CONFIG_IWLEGACY_DEBUG @@ -2213,7 +2213,7 @@ static void il3945_alive_start(struct il_priv *il) D_INFO("RFKILL status: 0x%x\n", rfkill); if (rfkill & 0x1) { - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); /* if RFKILL is not on, then wait for thermal * sensor in adapter to kick in */ while (il3945_hw_get_temperature(il) == 0) { @@ -2225,10 +2225,10 @@ static void il3945_alive_start(struct il_priv *il) D_INFO("Thermal calibration took %dus\n", thermal_spin * 10); } else - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); /* After the ALIVE response, we can send commands to 3945 uCode */ - set_bit(STATUS_ALIVE, &il->status); + set_bit(S_ALIVE, &il->status); /* Enable watchdog to monitor the driver tx queues */ il_setup_watchdog(il); @@ -2256,7 +2256,7 @@ static void il3945_alive_start(struct il_priv *il) /* Configure Bluetooth device coexistence support */ il_send_bt_config(il); - set_bit(STATUS_READY, &il->status); + set_bit(S_READY, &il->status); /* Configure the adapter for unassociated operation */ il3945_commit_rxon(il, ctx); @@ -2283,9 +2283,9 @@ static void __il3945_down(struct il_priv *il) il_scan_cancel_timeout(il, 200); - exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status); + exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set + /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set * to prevent rearm timer */ del_timer_sync(&il->watchdog); @@ -2300,7 +2300,7 @@ static void __il3945_down(struct il_priv *il) /* Wipe out the EXIT_PENDING status bit if we are not actually * exiting the module */ if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &il->status); + clear_bit(S_EXIT_PENDING, &il->status); /* stop and reset the on-board processor */ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); @@ -2317,25 +2317,25 @@ static void __il3945_down(struct il_priv *il) /* If we have not previously called il3945_init() then * clear all bits but the RF Kill bits and return */ if (!il_is_init(il)) { - il->status = test_bit(STATUS_RF_KILL_HW, &il->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &il->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_EXIT_PENDING, &il->status) << - STATUS_EXIT_PENDING; + il->status = test_bit(S_RF_KILL_HW, &il->status) << + S_RF_KILL_HW | + test_bit(S_GEO_CONFIGURED, &il->status) << + S_GEO_CONFIGURED | + test_bit(S_EXIT_PENDING, &il->status) << + S_EXIT_PENDING; goto exit; } /* ...otherwise clear out all the status bits but the RF Kill * bit and continue taking the NIC down. */ - il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &il->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_FW_ERROR, &il->status) << - STATUS_FW_ERROR | - test_bit(STATUS_EXIT_PENDING, &il->status) << - STATUS_EXIT_PENDING; + il->status &= test_bit(S_RF_KILL_HW, &il->status) << + S_RF_KILL_HW | + test_bit(S_GEO_CONFIGURED, &il->status) << + S_GEO_CONFIGURED | + test_bit(S_FW_ERROR, &il->status) << + S_FW_ERROR | + test_bit(S_EXIT_PENDING, &il->status) << + S_EXIT_PENDING; il3945_hw_txq_ctx_stop(il); il3945_hw_rxq_stop(il); @@ -2400,7 +2400,7 @@ static int __il3945_up(struct il_priv *il) if (rc) return rc; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) { + if (test_bit(S_EXIT_PENDING, &il->status)) { IL_WARN("Exit pending; will not bring the NIC up\n"); return -EIO; } @@ -2413,9 +2413,9 @@ static int __il3945_up(struct il_priv *il) /* If platform's RF_KILL switch is NOT set to KILL */ if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); else { - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); IL_WARN("Radio disabled by HW RF Kill switch\n"); return -ENODEV; } @@ -2448,7 +2448,7 @@ static int __il3945_up(struct il_priv *il) il->ucode_data.len); /* We return success when we resume from suspend and rf_kill is on. */ - if (test_bit(STATUS_RF_KILL_HW, &il->status)) + if (test_bit(S_RF_KILL_HW, &il->status)) return 0; for (i = 0; i < MAX_HW_RESTARTS; i++) { @@ -2472,9 +2472,9 @@ static int __il3945_up(struct il_priv *il) return 0; } - set_bit(STATUS_EXIT_PENDING, &il->status); + set_bit(S_EXIT_PENDING, &il->status); __il3945_down(il); - clear_bit(STATUS_EXIT_PENDING, &il->status); + clear_bit(S_EXIT_PENDING, &il->status); /* tried to restart and config the device for as long as our * patience could withstand */ @@ -2495,7 +2495,7 @@ static void il3945_bg_init_alive_start(struct work_struct *data) container_of(data, struct il_priv, init_alive_start.work); mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) goto out; il3945_init_alive_start(il); @@ -2509,7 +2509,7 @@ static void il3945_bg_alive_start(struct work_struct *data) container_of(data, struct il_priv, alive_start.work); mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) goto out; il3945_alive_start(il); @@ -2527,15 +2527,15 @@ static void il3945_rfkill_poll(struct work_struct *data) { struct il_priv *il = container_of(data, struct il_priv, _3945.rfkill_poll.work); - bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &il->status); + bool old_rfkill = test_bit(S_RF_KILL_HW, &il->status); bool new_rfkill = !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); if (new_rfkill != old_rfkill) { if (new_rfkill) - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); else - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill); @@ -2682,10 +2682,10 @@ int il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif) cmd.data = scan; scan->len = cpu_to_le16(cmd.len); - set_bit(STATUS_SCAN_HW, &il->status); + set_bit(S_SCAN_HW, &il->status); ret = il_send_cmd_sync(il, &cmd); if (ret) - clear_bit(STATUS_SCAN_HW, &il->status); + clear_bit(S_SCAN_HW, &il->status); return ret; } @@ -2705,10 +2705,10 @@ static void il3945_bg_restart(struct work_struct *data) { struct il_priv *il = container_of(data, struct il_priv, restart); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; - if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) { + if (test_and_clear_bit(S_FW_ERROR, &il->status)) { mutex_lock(&il->mutex); il->ctx.vif = NULL; il->is_open = 0; @@ -2719,7 +2719,7 @@ static void il3945_bg_restart(struct work_struct *data) il3945_down(il); mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) { + if (test_bit(S_EXIT_PENDING, &il->status)) { mutex_unlock(&il->mutex); return; } @@ -2735,7 +2735,7 @@ static void il3945_bg_rx_replenish(struct work_struct *data) container_of(data, struct il_priv, rx_replenish); mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) goto out; il3945_rx_replenish(il); @@ -2755,7 +2755,7 @@ void il3945_post_associate(struct il_priv *il) D_ASSOC("Associated as %d to: %pM\n", ctx->vif->bss_conf.aid, ctx->active.bssid_addr); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; il_scan_cancel_timeout(il, 200); @@ -2847,10 +2847,10 @@ static int il3945_mac_start(struct ieee80211_hw *hw) /* Wait for START_ALIVE from ucode. Otherwise callbacks from * mac80211 will not be run successfully. */ ret = wait_event_timeout(il->wait_command_queue, - test_bit(STATUS_READY, &il->status), + test_bit(S_READY, &il->status), UCODE_READY_TIMEOUT); if (!ret) { - if (!test_bit(STATUS_READY, &il->status)) { + if (!test_bit(S_READY, &il->status)) { IL_ERR( "Wait for START_ALIVE timeout after %dms.\n", jiffies_to_msecs(UCODE_READY_TIMEOUT)); @@ -2918,7 +2918,7 @@ void il3945_config_ap(struct il_priv *il) struct ieee80211_vif *vif = ctx->vif; int rc = 0; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; /* The following should be done only at AP bring up */ @@ -3870,7 +3870,7 @@ static void __devexit il3945_pci_remove(struct pci_dev *pdev) il_dbgfs_unregister(il); - set_bit(STATUS_EXIT_PENDING, &il->status); + set_bit(S_EXIT_PENDING, &il->status); il_leds_exit(il); diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c index 17615c3..8ebd576 100644 --- a/drivers/net/wireless/iwlegacy/3945.c +++ b/drivers/net/wireless/iwlegacy/3945.c @@ -1008,7 +1008,7 @@ int il3945_hw_nic_init(struct il_priv *il) if (rc) return rc; - set_bit(STATUS_INIT, &il->status); + set_bit(S_INIT, &il->status); return 0; } @@ -1394,7 +1394,7 @@ static int il3945_send_tx_power(struct il_priv *il) }; u16 chan; - if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status), + if (WARN_ONCE(test_bit(S_SCAN_HW, &il->status), "TX Power requested while scanning!\n")) return -EAGAIN; @@ -1571,7 +1571,7 @@ static int il3945_hw_reg_comp_txpower_temp(struct il_priv *il) int temperature = il->temperature; if (il->disable_tx_power_cal || - test_bit(STATUS_SCANNING, &il->status)) { + test_bit(S_SCANNING, &il->status)) { /* do not perform tx power calibration */ return 0; } @@ -1726,7 +1726,7 @@ int il3945_commit_rxon(struct il_priv *il, struct il_rxon_context *ctx) int rc = 0; bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return -EINVAL; if (!il_is_alive(il)) @@ -1885,7 +1885,7 @@ static void il3945_bg_reg_txpower_periodic(struct work_struct *work) struct il_priv *il = container_of(work, struct il_priv, _3945.thermal_periodic.work); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; mutex_lock(&il->mutex); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index ee084a8..c4198bd 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -90,7 +90,7 @@ void il4965_check_abort_status(struct il_priv *il, { if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { IL_ERR("Tx flush command to flush out all frames\n"); - if (!test_bit(STATUS_EXIT_PENDING, &il->status)) + if (!test_bit(S_EXIT_PENDING, &il->status)) queue_work(il->workqueue, &il->tx_flush); } } @@ -246,7 +246,7 @@ int il4965_hw_nic_init(struct il_priv *il) } else il4965_txq_ctx_reset(il); - set_bit(STATUS_INIT, &il->status); + set_bit(S_INIT, &il->status); return 0; } @@ -966,7 +966,7 @@ int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) scan->tx_cmd.rate_n_flags = il4965_hw_set_rate_n_flags(rate, rate_flags); /* In power save mode use one chain, otherwise use all chains */ - if (test_bit(STATUS_POWER_PMI, &il->status)) { + if (test_bit(S_POWER_PMI, &il->status)) { /* rx_ant has been set to all valid chains previously */ active_chains = rx_ant & ((u8)(il->chain_noise_data.active_chains)); @@ -1010,11 +1010,11 @@ int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) cmd.data = scan; scan->len = cpu_to_le16(cmd.len); - set_bit(STATUS_SCAN_HW, &il->status); + set_bit(S_SCAN_HW, &il->status); ret = il_send_cmd_sync(il, &cmd); if (ret) - clear_bit(STATUS_SCAN_HW, &il->status); + clear_bit(S_SCAN_HW, &il->status); return ret; } @@ -1120,7 +1120,7 @@ static u8 il4965_count_chain_bitmap(u32 chain_bitmap) void il4965_set_rxon_chain(struct il_priv *il, struct il_rxon_context *ctx) { bool is_single = il4965_is_single_rx_stream(il); - bool is_cam = !test_bit(STATUS_POWER_PMI, &il->status); + bool is_cam = !test_bit(S_POWER_PMI, &il->status); u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; u32 active_chains; u16 rx_chain; @@ -1258,7 +1258,7 @@ void il4965_rx_missed_beacon_notif(struct il_priv *il, le32_to_cpu(missed_beacon->total_missed_becons), le32_to_cpu(missed_beacon->num_recvd_beacons), le32_to_cpu(missed_beacon->num_expected_beacons)); - if (!test_bit(STATUS_SCANNING, &il->status)) + if (!test_bit(S_SCANNING, &il->status)) il4965_init_sensitivity(il); } } @@ -1378,7 +1378,7 @@ void il4965_rx_stats(struct il_priv *il, memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats)); - set_bit(STATUS_STATISTICS, &il->status); + set_bit(S_STATISTICS, &il->status); /* Reschedule the stats timer to occur in * REG_RECALIB_PERIOD seconds to ensure we get a @@ -1387,7 +1387,7 @@ void il4965_rx_stats(struct il_priv *il, mod_timer(&il->stats_periodic, jiffies + msecs_to_jiffies(REG_RECALIB_PERIOD * 1000)); - if (unlikely(!test_bit(STATUS_SCANNING, &il->status)) && + if (unlikely(!test_bit(S_SCANNING, &il->status)) && (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { il4965_rx_calc_noise(il); queue_work(il->workqueue, &il->run_time_calib_work); @@ -3809,7 +3809,7 @@ static void il4965_bg_stats_periodic(unsigned long data) { struct il_priv *il = (struct il_priv *)data; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; /* dont send host command if rf-kill is on */ @@ -3895,17 +3895,17 @@ static void il4965_rx_card_state_notif(struct il_priv *il, il4965_perform_ct_kill_task(il); if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); else - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); if (!(flags & RXON_CARD_DISABLED)) il_scan_cancel(il); - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &il->status))) + if ((test_bit(S_RF_KILL_HW, &status) != + test_bit(S_RF_KILL_HW, &il->status))) wiphy_rfkill_set_hw_state(il->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &il->status)); + test_bit(S_RF_KILL_HW, &il->status)); else wake_up(&il->wait_command_queue); } @@ -4199,11 +4199,11 @@ static void il4965_irq_tasklet(struct il_priv *il) * is killed. Hence update the killswitch state here. The * rfkill handler will care about restarting if needed. */ - if (!test_bit(STATUS_ALIVE, &il->status)) { + if (!test_bit(S_ALIVE, &il->status)) { if (hw_rf_kill) - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); else - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); } @@ -4272,7 +4272,7 @@ static void il4965_irq_tasklet(struct il_priv *il) /* Re-enable all interrupts */ /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &il->status)) + if (test_bit(S_INT_ENABLED, &il->status)) il_enable_interrupts(il); /* Re-enable RF_KILL if it occurred */ else if (handled & CSR_INT_BIT_RF_KILL) @@ -5079,7 +5079,7 @@ static void il4965_alive_start(struct il_priv *il) /* After the ALIVE response, we can send host commands to the uCode */ - set_bit(STATUS_ALIVE, &il->status); + set_bit(S_ALIVE, &il->status); /* Enable watchdog to monitor the driver tx queues */ il_setup_watchdog(il); @@ -5110,7 +5110,7 @@ static void il4965_alive_start(struct il_priv *il) il4965_reset_run_time_calib(il); - set_bit(STATUS_READY, &il->status); + set_bit(S_READY, &il->status); /* Configure the adapter for unassociated operation */ il_commit_rxon(il, ctx); @@ -5141,9 +5141,9 @@ static void __il4965_down(struct il_priv *il) il_scan_cancel_timeout(il, 200); - exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status); + exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set + /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set * to prevent rearm timer */ del_timer_sync(&il->watchdog); @@ -5157,7 +5157,7 @@ static void __il4965_down(struct il_priv *il) /* Wipe out the EXIT_PENDING status bit if we are not actually * exiting the module */ if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &il->status); + clear_bit(S_EXIT_PENDING, &il->status); /* stop and reset the on-board processor */ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); @@ -5174,25 +5174,25 @@ static void __il4965_down(struct il_priv *il) /* If we have not previously called il_init() then * clear all bits but the RF Kill bit and return */ if (!il_is_init(il)) { - il->status = test_bit(STATUS_RF_KILL_HW, &il->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &il->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_EXIT_PENDING, &il->status) << - STATUS_EXIT_PENDING; + il->status = test_bit(S_RF_KILL_HW, &il->status) << + S_RF_KILL_HW | + test_bit(S_GEO_CONFIGURED, &il->status) << + S_GEO_CONFIGURED | + test_bit(S_EXIT_PENDING, &il->status) << + S_EXIT_PENDING; goto exit; } /* ...otherwise clear out all the status bits but the RF Kill * bit and continue taking the NIC down. */ - il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &il->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_FW_ERROR, &il->status) << - STATUS_FW_ERROR | - test_bit(STATUS_EXIT_PENDING, &il->status) << - STATUS_EXIT_PENDING; + il->status &= test_bit(S_RF_KILL_HW, &il->status) << + S_RF_KILL_HW | + test_bit(S_GEO_CONFIGURED, &il->status) << + S_GEO_CONFIGURED | + test_bit(S_FW_ERROR, &il->status) << + S_FW_ERROR | + test_bit(S_EXIT_PENDING, &il->status) << + S_EXIT_PENDING; il4965_txq_ctx_stop(il); il4965_rxq_stop(il); @@ -5283,7 +5283,7 @@ static int __il4965_up(struct il_priv *il) int i; int ret; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) { + if (test_bit(S_EXIT_PENDING, &il->status)) { IL_WARN("Exit pending; will not bring the NIC up\n"); return -EIO; } @@ -5309,9 +5309,9 @@ static int __il4965_up(struct il_priv *il) /* If platform's RF_KILL switch is NOT set to KILL */ if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); else - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); if (il_is_rfkill(il)) { wiphy_rfkill_set_hw_state(il->hw->wiphy, true); @@ -5372,9 +5372,9 @@ static int __il4965_up(struct il_priv *il) return 0; } - set_bit(STATUS_EXIT_PENDING, &il->status); + set_bit(S_EXIT_PENDING, &il->status); __il4965_down(il); - clear_bit(STATUS_EXIT_PENDING, &il->status); + clear_bit(S_EXIT_PENDING, &il->status); /* tried to restart and config the device for as long as our * patience could withstand */ @@ -5395,7 +5395,7 @@ static void il4965_bg_init_alive_start(struct work_struct *data) container_of(data, struct il_priv, init_alive_start.work); mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) goto out; il->cfg->ops->lib->init_alive_start(il); @@ -5409,7 +5409,7 @@ static void il4965_bg_alive_start(struct work_struct *data) container_of(data, struct il_priv, alive_start.work); mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) goto out; il4965_alive_start(il); @@ -5424,8 +5424,8 @@ static void il4965_bg_run_time_calib_work(struct work_struct *work) mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status) || - test_bit(STATUS_SCANNING, &il->status)) { + if (test_bit(S_EXIT_PENDING, &il->status) || + test_bit(S_SCANNING, &il->status)) { mutex_unlock(&il->mutex); return; } @@ -5444,10 +5444,10 @@ static void il4965_bg_restart(struct work_struct *data) { struct il_priv *il = container_of(data, struct il_priv, restart); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; - if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) { + if (test_and_clear_bit(S_FW_ERROR, &il->status)) { mutex_lock(&il->mutex); il->ctx.vif = NULL; il->is_open = 0; @@ -5461,7 +5461,7 @@ static void il4965_bg_restart(struct work_struct *data) il4965_down(il); mutex_lock(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) { + if (test_bit(S_EXIT_PENDING, &il->status)) { mutex_unlock(&il->mutex); return; } @@ -5476,7 +5476,7 @@ static void il4965_bg_rx_replenish(struct work_struct *data) struct il_priv *il = container_of(data, struct il_priv, rx_replenish); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; mutex_lock(&il->mutex); @@ -5582,10 +5582,10 @@ int il4965_mac_start(struct ieee80211_hw *hw) /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from * mac80211 will not be run successfully. */ ret = wait_event_timeout(il->wait_command_queue, - test_bit(STATUS_READY, &il->status), + test_bit(S_READY, &il->status), UCODE_READY_TIMEOUT); if (!ret) { - if (!test_bit(STATUS_READY, &il->status)) { + if (!test_bit(S_READY, &il->status)) { IL_ERR("START_ALIVE timeout after %dms.\n", jiffies_to_msecs(UCODE_READY_TIMEOUT)); return -ETIMEDOUT; @@ -5751,7 +5751,7 @@ int il4965_mac_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_RX_STOP: D_HT("stop Rx\n"); ret = il4965_sta_rx_agg_stop(il, sta, tid); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) ret = 0; break; case IEEE80211_AMPDU_TX_START: @@ -5761,7 +5761,7 @@ int il4965_mac_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_TX_STOP: D_HT("stop Tx\n"); ret = il4965_tx_agg_stop(il, vif, sta, tid); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) ret = 0; break; case IEEE80211_AMPDU_TX_OPERATIONAL: @@ -5833,9 +5833,9 @@ void il4965_mac_channel_switch(struct ieee80211_hw *hw, if (il_is_rfkill(il)) goto out; - if (test_bit(STATUS_EXIT_PENDING, &il->status) || - test_bit(STATUS_SCANNING, &il->status) || - test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status) || + test_bit(S_SCANNING, &il->status) || + test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) goto out; if (!il_is_associated_ctx(ctx)) @@ -5891,10 +5891,10 @@ void il4965_mac_channel_switch(struct ieee80211_hw *hw, * at this point, staging_rxon has the * configuration for channel switch */ - set_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status); + set_bit(S_CHANNEL_SWITCH_PENDING, &il->status); il->switch_channel = cpu_to_le16(ch); if (il->cfg->ops->lib->set_channel_switch(il, ch_switch)) { - clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status); + clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status); il->switch_channel = 0; ieee80211_chswitch_done(ctx->vif, false); } @@ -5968,8 +5968,8 @@ static void il4965_bg_txpower_work(struct work_struct *work) * then just return; the stats notification will * kick off another scheduled work to compensate for * any temperature delta we missed here. */ - if (test_bit(STATUS_EXIT_PENDING, &il->status) || - test_bit(STATUS_SCANNING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status) || + test_bit(S_SCANNING, &il->status)) goto out; /* Regardless of if we are associated, we must reconfigure the @@ -6376,12 +6376,12 @@ il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* If platform's RF_KILL switch is NOT set to KILL */ if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); else - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); wiphy_rfkill_set_hw_state(il->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &il->status)); + test_bit(S_RF_KILL_HW, &il->status)); il_power_initialize(il); @@ -6433,9 +6433,9 @@ static void __devexit il4965_pci_remove(struct pci_dev *pdev) /* ieee80211_unregister_hw call wil cause il_mac_stop to * to be called and il4965_down since we are removing the device - * we need to set STATUS_EXIT_PENDING bit. + * we need to set S_EXIT_PENDING bit. */ - set_bit(STATUS_EXIT_PENDING, &il->status); + set_bit(S_EXIT_PENDING, &il->status); il_leds_exit(il); diff --git a/drivers/net/wireless/iwlegacy/4965.c b/drivers/net/wireless/iwlegacy/4965.c index 8199e63..1efe824 100644 --- a/drivers/net/wireless/iwlegacy/4965.c +++ b/drivers/net/wireless/iwlegacy/4965.c @@ -1349,7 +1349,7 @@ static int il4965_send_tx_power(struct il_priv *il) u8 ctrl_chan_high = 0; struct il_rxon_context *ctx = &il->ctx; - if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status), + if (WARN_ONCE(test_bit(S_SCAN_HW, &il->status), "TX Power requested while scanning!\n")) return -EAGAIN; @@ -1441,7 +1441,7 @@ static int il4965_commit_rxon(struct il_priv *il, struct il_rxon_context *ctx) * receive commit_rxon request * abort any previous channel switch if still in process */ - if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status) && + if (test_bit(S_CHANNEL_SWITCH_PENDING, &il->status) && il->switch_channel != ctx->staging.channel) { D_11H("abort channel switch on %d\n", le16_to_cpu(il->switch_channel)); @@ -1673,7 +1673,7 @@ static int il4965_hw_get_temperature(struct il_priv *il) s32 R1, R2, R3; u32 R4; - if (test_bit(STATUS_TEMPERATURE, &il->status) && + if (test_bit(S_TEMPERATURE, &il->status) && (il->_4965.stats.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK)) { D_TEMP("Running HT40 temperature calibration\n"); @@ -1696,7 +1696,7 @@ static int il4965_hw_get_temperature(struct il_priv *il) * with an updated temperature, use R4 provided to us in the * "initialize" ALIVE response. */ - if (!test_bit(STATUS_TEMPERATURE, &il->status)) + if (!test_bit(S_TEMPERATURE, &il->status)) vt = sign_extend32(R4, 23); else vt = sign_extend32(le32_to_cpu(il->_4965.stats. @@ -1737,7 +1737,7 @@ static int il4965_is_temp_calib_needed(struct il_priv *il) { int temp_diff; - if (!test_bit(STATUS_STATISTICS, &il->status)) { + if (!test_bit(S_STATISTICS, &il->status)) { D_TEMP("Temperature not updated -- no stats.\n"); return 0; } @@ -1784,10 +1784,10 @@ static void il4965_temperature_calib(struct il_priv *il) } il->temperature = temp; - set_bit(STATUS_TEMPERATURE, &il->status); + set_bit(S_TEMPERATURE, &il->status); if (!il->disable_tx_power_cal && - unlikely(!test_bit(STATUS_SCANNING, &il->status)) && + unlikely(!test_bit(S_SCANNING, &il->status)) && il4965_is_temp_calib_needed(il)) queue_work(il->workqueue, &il->txpower_work); } @@ -2179,7 +2179,7 @@ static void il4965_post_associate(struct il_priv *il) if (!vif || !il->is_open) return; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; il_scan_cancel_timeout(il, 200); @@ -2254,7 +2254,7 @@ static void il4965_config_ap(struct il_priv *il) lockdep_assert_held(&il->mutex); - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; /* The following should be done only at AP bring up */ diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index bd222f5..ba7ee4b 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -165,7 +165,7 @@ int il_init_geos(struct il_priv *il) if (il->bands[IEEE80211_BAND_2GHZ].n_bitrates || il->bands[IEEE80211_BAND_5GHZ].n_bitrates) { D_INFO("Geography modes already initialized.\n"); - set_bit(STATUS_GEO_CONFIGURED, &il->status); + set_bit(S_GEO_CONFIGURED, &il->status); return 0; } @@ -264,7 +264,7 @@ int il_init_geos(struct il_priv *il) il->bands[IEEE80211_BAND_2GHZ].n_channels, il->bands[IEEE80211_BAND_5GHZ].n_channels); - set_bit(STATUS_GEO_CONFIGURED, &il->status); + set_bit(S_GEO_CONFIGURED, &il->status); return 0; } @@ -277,7 +277,7 @@ void il_free_geos(struct il_priv *il) { kfree(il->ieee_channels); kfree(il->ieee_rates); - clear_bit(STATUS_GEO_CONFIGURED, &il->status); + clear_bit(S_GEO_CONFIGURED, &il->status); } EXPORT_SYMBOL(il_free_geos); @@ -839,10 +839,10 @@ void il_chswitch_done(struct il_priv *il, bool is_success) { struct il_rxon_context *ctx = &il->ctx; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; - if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status)) + if (test_and_clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) ieee80211_chswitch_done(ctx->vif, is_success); } EXPORT_SYMBOL(il_chswitch_done); @@ -855,7 +855,7 @@ void il_rx_csa(struct il_priv *il, struct il_rx_buf *rxb) struct il_rxon_context *ctx = &il->ctx; struct il_rxon_cmd *rxon = (void *)&ctx->active; - if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status)) + if (!test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) return; if (!le32_to_cpu(csa->status) && csa->channel == il->switch_channel) { @@ -903,10 +903,10 @@ EXPORT_SYMBOL(il_print_rx_config_cmd); void il_irq_handle_error(struct il_priv *il) { /* Set the FW error flag -- cleared on il_down */ - set_bit(STATUS_FW_ERROR, &il->status); + set_bit(S_FW_ERROR, &il->status); /* Cancel currently queued command. */ - clear_bit(STATUS_HCMD_ACTIVE, &il->status); + clear_bit(S_HCMD_ACTIVE, &il->status); IL_ERR("Loaded firmware version: %s\n", il->hw->wiphy->fw_version); @@ -924,9 +924,9 @@ void il_irq_handle_error(struct il_priv *il) /* Keep the restart process from trying to send host * commands by clearing the INIT status bit */ - clear_bit(STATUS_READY, &il->status); + clear_bit(S_READY, &il->status); - if (!test_bit(STATUS_EXIT_PENDING, &il->status)) { + if (!test_bit(S_EXIT_PENDING, &il->status)) { IL_DBG(IL_DL_FW_ERRORS, "Restarting adapter due to uCode error.\n"); @@ -1127,7 +1127,7 @@ int il_set_tx_power(struct il_priv *il, s8 tx_power, bool force) il->tx_power_next = tx_power; /* do not set tx power when scanning or channel changing */ - defer = test_bit(STATUS_SCANNING, &il->status) || + defer = test_bit(S_SCANNING, &il->status) || memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)); if (defer && !force) { D_INFO("Deferring tx power set\n"); @@ -1678,7 +1678,7 @@ int il_force_reset(struct il_priv *il, bool external) { struct il_force_reset *force_reset; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return -EINVAL; force_reset = &il->force_reset; @@ -1713,13 +1713,13 @@ int il_force_reset(struct il_priv *il, bool external) IL_ERR("On demand firmware reload\n"); /* Set the FW error flag -- cleared on il_down */ - set_bit(STATUS_FW_ERROR, &il->status); + set_bit(S_FW_ERROR, &il->status); wake_up(&il->wait_command_queue); /* * Keep the restart process from trying to send host * commands by clearing the INIT status bit */ - clear_bit(STATUS_READY, &il->status); + clear_bit(S_READY, &il->status); queue_work(il->workqueue, &il->restart); return 0; @@ -1826,7 +1826,7 @@ void il_bg_watchdog(unsigned long data) int cnt; unsigned long timeout; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; timeout = il->cfg->base_params->wd_timeout; @@ -1960,9 +1960,9 @@ int il_pci_resume(struct device *device) hw_rfkill = true; if (hw_rfkill) - set_bit(STATUS_RF_KILL_HW, &il->status); + set_bit(S_RF_KILL_HW, &il->status); else - clear_bit(STATUS_RF_KILL_HW, &il->status); + clear_bit(S_RF_KILL_HW, &il->status); wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rfkill); @@ -1985,7 +1985,7 @@ EXPORT_SYMBOL(il_pm_ops); static void il_update_qos(struct il_priv *il, struct il_rxon_context *ctx) { - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return; if (!ctx->is_active) @@ -2034,7 +2034,7 @@ int il_mac_config(struct ieee80211_hw *hw, u32 changed) D_MAC80211("enter to channel %d changed 0x%X\n", channel->hw_value, changed); - if (unlikely(test_bit(STATUS_SCANNING, &il->status))) { + if (unlikely(test_bit(S_SCANNING, &il->status))) { scan_active = 1; D_MAC80211("scan active\n"); } @@ -2566,7 +2566,7 @@ unplugged: none: /* re-enable interrupts here since we don't have anything to service. */ /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &il->status)) + if (test_bit(S_INT_ENABLED, &il->status)) il_enable_interrupts(il); spin_unlock_irqrestore(&il->lock, flags); return IRQ_NONE; diff --git a/drivers/net/wireless/iwlegacy/iwl-core.h b/drivers/net/wireless/iwlegacy/iwl-core.h index 8333761..5b2883f 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.h +++ b/drivers/net/wireless/iwlegacy/iwl-core.h @@ -533,47 +533,47 @@ void il_free_geos(struct il_priv *il); /*************** DRIVER STATUS FUNCTIONS *****/ -#define STATUS_HCMD_ACTIVE 0 /* host command in progress */ -/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */ -#define STATUS_INT_ENABLED 2 -#define STATUS_RF_KILL_HW 3 -#define STATUS_CT_KILL 4 -#define STATUS_INIT 5 -#define STATUS_ALIVE 6 -#define STATUS_READY 7 -#define STATUS_TEMPERATURE 8 -#define STATUS_GEO_CONFIGURED 9 -#define STATUS_EXIT_PENDING 10 -#define STATUS_STATISTICS 12 -#define STATUS_SCANNING 13 -#define STATUS_SCAN_ABORTING 14 -#define STATUS_SCAN_HW 15 -#define STATUS_POWER_PMI 16 -#define STATUS_FW_ERROR 17 -#define STATUS_CHANNEL_SWITCH_PENDING 18 +#define S_HCMD_ACTIVE 0 /* host command in progress */ +/* 1 is unused (used to be S_HCMD_SYNC_ACTIVE) */ +#define S_INT_ENABLED 2 +#define S_RF_KILL_HW 3 +#define S_CT_KILL 4 +#define S_INIT 5 +#define S_ALIVE 6 +#define S_READY 7 +#define S_TEMPERATURE 8 +#define S_GEO_CONFIGURED 9 +#define S_EXIT_PENDING 10 +#define S_STATISTICS 12 +#define S_SCANNING 13 +#define S_SCAN_ABORTING 14 +#define S_SCAN_HW 15 +#define S_POWER_PMI 16 +#define S_FW_ERROR 17 +#define S_CHANNEL_SWITCH_PENDING 18 static inline int il_is_ready(struct il_priv *il) { /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are * set but EXIT_PENDING is not */ - return test_bit(STATUS_READY, &il->status) && - test_bit(STATUS_GEO_CONFIGURED, &il->status) && - !test_bit(STATUS_EXIT_PENDING, &il->status); + return test_bit(S_READY, &il->status) && + test_bit(S_GEO_CONFIGURED, &il->status) && + !test_bit(S_EXIT_PENDING, &il->status); } static inline int il_is_alive(struct il_priv *il) { - return test_bit(STATUS_ALIVE, &il->status); + return test_bit(S_ALIVE, &il->status); } static inline int il_is_init(struct il_priv *il) { - return test_bit(STATUS_INIT, &il->status); + return test_bit(S_INIT, &il->status); } static inline int il_is_rfkill_hw(struct il_priv *il) { - return test_bit(STATUS_RF_KILL_HW, &il->status); + return test_bit(S_RF_KILL_HW, &il->status); } static inline int il_is_rfkill(struct il_priv *il) @@ -583,7 +583,7 @@ static inline int il_is_rfkill(struct il_priv *il) static inline int il_is_ctkill(struct il_priv *il) { - return test_bit(STATUS_CT_KILL, &il->status); + return test_bit(S_CT_KILL, &il->status); } static inline int il_is_ready_rf(struct il_priv *il) diff --git a/drivers/net/wireless/iwlegacy/iwl-debugfs.c b/drivers/net/wireless/iwlegacy/iwl-debugfs.c index 8448db7..114922b 100644 --- a/drivers/net/wireless/iwlegacy/iwl-debugfs.c +++ b/drivers/net/wireless/iwlegacy/iwl-debugfs.c @@ -402,7 +402,7 @@ il_dbgfs_channels_read(struct file *file, char __user *user_buf, char *buf; ssize_t ret; - if (!test_bit(STATUS_GEO_CONFIGURED, &il->status)) + if (!test_bit(S_GEO_CONFIGURED, &il->status)) return -EAGAIN; buf = kzalloc(bufsz, GFP_KERNEL); @@ -471,38 +471,38 @@ static ssize_t il_dbgfs_status_read(struct file *file, int pos = 0; const size_t bufsz = sizeof(buf); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_ACTIVE:\t %d\n", - test_bit(STATUS_HCMD_ACTIVE, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INT_ENABLED:\t %d\n", - test_bit(STATUS_INT_ENABLED, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n", - test_bit(STATUS_RF_KILL_HW, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_CT_KILL:\t\t %d\n", - test_bit(STATUS_CT_KILL, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n", - test_bit(STATUS_INIT, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n", - test_bit(STATUS_ALIVE, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n", - test_bit(STATUS_READY, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_TEMPERATURE:\t %d\n", - test_bit(STATUS_TEMPERATURE, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_GEO_CONFIGURED:\t %d\n", - test_bit(STATUS_GEO_CONFIGURED, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n", - test_bit(STATUS_EXIT_PENDING, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n", - test_bit(STATUS_STATISTICS, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n", - test_bit(STATUS_SCANNING, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_ABORTING:\t %d\n", - test_bit(STATUS_SCAN_ABORTING, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_HW:\t\t %d\n", - test_bit(STATUS_SCAN_HW, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_POWER_PMI:\t %d\n", - test_bit(STATUS_POWER_PMI, &il->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_FW_ERROR:\t %d\n", - test_bit(STATUS_FW_ERROR, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_HCMD_ACTIVE:\t %d\n", + test_bit(S_HCMD_ACTIVE, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_INT_ENABLED:\t %d\n", + test_bit(S_INT_ENABLED, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_RF_KILL_HW:\t %d\n", + test_bit(S_RF_KILL_HW, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_CT_KILL:\t\t %d\n", + test_bit(S_CT_KILL, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_INIT:\t\t %d\n", + test_bit(S_INIT, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_ALIVE:\t\t %d\n", + test_bit(S_ALIVE, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_READY:\t\t %d\n", + test_bit(S_READY, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_TEMPERATURE:\t %d\n", + test_bit(S_TEMPERATURE, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_GEO_CONFIGURED:\t %d\n", + test_bit(S_GEO_CONFIGURED, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_EXIT_PENDING:\t %d\n", + test_bit(S_EXIT_PENDING, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_STATISTICS:\t %d\n", + test_bit(S_STATISTICS, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_SCANNING:\t %d\n", + test_bit(S_SCANNING, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_SCAN_ABORTING:\t %d\n", + test_bit(S_SCAN_ABORTING, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_SCAN_HW:\t\t %d\n", + test_bit(S_SCAN_HW, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_POWER_PMI:\t %d\n", + test_bit(S_POWER_PMI, &il->status)); + pos += scnprintf(buf + pos, bufsz - pos, "S_FW_ERROR:\t %d\n", + test_bit(S_FW_ERROR, &il->status)); return simple_read_from_buffer(user_buf, count, ppos, buf, pos); } diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c index 0b11f2f..4762a0e 100644 --- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c +++ b/drivers/net/wireless/iwlegacy/iwl-hcmd.c @@ -128,7 +128,7 @@ il_send_cmd_async(struct il_priv *il, struct il_host_cmd *cmd) if (!cmd->callback) cmd->callback = il_generic_cmd_callback; - if (test_bit(STATUS_EXIT_PENDING, &il->status)) + if (test_bit(S_EXIT_PENDING, &il->status)) return -EBUSY; ret = il_enqueue_hcmd(il, cmd); @@ -155,7 +155,7 @@ int il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd) D_INFO("Attempting to send sync command %s\n", il_get_cmd_string(cmd->id)); - set_bit(STATUS_HCMD_ACTIVE, &il->status); + set_bit(S_HCMD_ACTIVE, &il->status); D_INFO("Setting HCMD_ACTIVE for command %s\n", il_get_cmd_string(cmd->id)); @@ -168,16 +168,16 @@ int il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd) } ret = wait_event_timeout(il->wait_command_queue, - !test_bit(STATUS_HCMD_ACTIVE, &il->status), + !test_bit(S_HCMD_ACTIVE, &il->status), HOST_COMPLETE_TIMEOUT); if (!ret) { - if (test_bit(STATUS_HCMD_ACTIVE, &il->status)) { + if (test_bit(S_HCMD_ACTIVE, &il->status)) { IL_ERR( "Error sending %s: time out after %dms.\n", il_get_cmd_string(cmd->id), jiffies_to_msecs(HOST_COMPLETE_TIMEOUT)); - clear_bit(STATUS_HCMD_ACTIVE, &il->status); + clear_bit(S_HCMD_ACTIVE, &il->status); D_INFO( "Clearing HCMD_ACTIVE for command %s\n", il_get_cmd_string(cmd->id)); @@ -186,13 +186,13 @@ int il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd) } } - if (test_bit(STATUS_RF_KILL_HW, &il->status)) { + if (test_bit(S_RF_KILL_HW, &il->status)) { IL_ERR("Command %s aborted: RF KILL Switch\n", il_get_cmd_string(cmd->id)); ret = -ECANCELED; goto fail; } - if (test_bit(STATUS_FW_ERROR, &il->status)) { + if (test_bit(S_FW_ERROR, &il->status)) { IL_ERR("Command %s failed: FW Error\n", il_get_cmd_string(cmd->id)); ret = -EIO; diff --git a/drivers/net/wireless/iwlegacy/iwl-helpers.h b/drivers/net/wireless/iwlegacy/iwl-helpers.h index 5fcb23e..0e64003 100644 --- a/drivers/net/wireless/iwlegacy/iwl-helpers.h +++ b/drivers/net/wireless/iwlegacy/iwl-helpers.h @@ -146,7 +146,7 @@ static inline void il_stop_queue(struct il_priv *il, static inline void il_disable_interrupts(struct il_priv *il) { - clear_bit(STATUS_INT_ENABLED, &il->status); + clear_bit(S_INT_ENABLED, &il->status); /* disable interrupts from uCode/NIC to host */ _il_wr(il, CSR_INT_MASK, 0x00000000); @@ -167,7 +167,7 @@ static inline void il_enable_rfkill_int(struct il_priv *il) static inline void il_enable_interrupts(struct il_priv *il) { D_ISR("Enabling interrupts\n"); - set_bit(STATUS_INT_ENABLED, &il->status); + set_bit(S_INT_ENABLED, &il->status); _il_wr(il, CSR_INT_MASK, il->inta_mask); } diff --git a/drivers/net/wireless/iwlegacy/iwl-led.c b/drivers/net/wireless/iwlegacy/iwl-led.c index 3652cdc..a840c2e 100644 --- a/drivers/net/wireless/iwlegacy/iwl-led.c +++ b/drivers/net/wireless/iwlegacy/iwl-led.c @@ -107,7 +107,7 @@ static int il_led_cmd(struct il_priv *il, }; int ret; - if (!test_bit(STATUS_READY, &il->status)) + if (!test_bit(S_READY, &il->status)) return -EBUSY; if (il->blink_on == on && il->blink_off == off) diff --git a/drivers/net/wireless/iwlegacy/iwl-power.c b/drivers/net/wireless/iwlegacy/iwl-power.c index 051623a..c66a0f7 100644 --- a/drivers/net/wireless/iwlegacy/iwl-power.c +++ b/drivers/net/wireless/iwlegacy/iwl-power.c @@ -113,18 +113,18 @@ il_power_set_mode(struct il_priv *il, struct il_powertable_cmd *cmd, /* scan complete use sleep_power_next, need to be updated */ memcpy(&il->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); - if (test_bit(STATUS_SCANNING, &il->status) && !force) { + if (test_bit(S_SCANNING, &il->status) && !force) { D_INFO("Defer power set mode while scanning\n"); return 0; } if (cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK) - set_bit(STATUS_POWER_PMI, &il->status); + set_bit(S_POWER_PMI, &il->status); ret = il_set_power(il, cmd); if (!ret) { if (!(cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK)) - clear_bit(STATUS_POWER_PMI, &il->status); + clear_bit(S_POWER_PMI, &il->status); if (il->cfg->ops->lib->update_chain_flags && update_chains) il->cfg->ops->lib->update_chain_flags(il); diff --git a/drivers/net/wireless/iwlegacy/iwl-rx.c b/drivers/net/wireless/iwlegacy/iwl-rx.c index 58d19c1..76f2361 100644 --- a/drivers/net/wireless/iwlegacy/iwl-rx.c +++ b/drivers/net/wireless/iwlegacy/iwl-rx.c @@ -137,7 +137,7 @@ il_rx_queue_update_write_ptr(struct il_priv *il, goto exit_unlock; /* If power-saving is in use, make sure device is awake */ - if (test_bit(STATUS_POWER_PMI, &il->status)) { + if (test_bit(S_POWER_PMI, &il->status)) { reg = _il_rd(il, CSR_UCODE_DRV_GP1); if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c index 18226d1..6d20f2b 100644 --- a/drivers/net/wireless/iwlegacy/iwl-scan.c +++ b/drivers/net/wireless/iwlegacy/iwl-scan.c @@ -66,11 +66,11 @@ static int il_send_scan_abort(struct il_priv *il) /* Exit instantly with error when device is not ready * to receive scan abort command or it does not perform * hardware scan currently */ - if (!test_bit(STATUS_READY, &il->status) || - !test_bit(STATUS_GEO_CONFIGURED, &il->status) || - !test_bit(STATUS_SCAN_HW, &il->status) || - test_bit(STATUS_FW_ERROR, &il->status) || - test_bit(STATUS_EXIT_PENDING, &il->status)) + if (!test_bit(S_READY, &il->status) || + !test_bit(S_GEO_CONFIGURED, &il->status) || + !test_bit(S_SCAN_HW, &il->status) || + test_bit(S_FW_ERROR, &il->status) || + test_bit(S_EXIT_PENDING, &il->status)) return -EIO; ret = il_send_cmd_sync(il, &cmd); @@ -109,15 +109,15 @@ void il_force_scan_end(struct il_priv *il) { lockdep_assert_held(&il->mutex); - if (!test_bit(STATUS_SCANNING, &il->status)) { + if (!test_bit(S_SCANNING, &il->status)) { D_SCAN("Forcing scan end while not scanning\n"); return; } D_SCAN("Forcing scan end\n"); - clear_bit(STATUS_SCANNING, &il->status); - clear_bit(STATUS_SCAN_HW, &il->status); - clear_bit(STATUS_SCAN_ABORTING, &il->status); + clear_bit(S_SCANNING, &il->status); + clear_bit(S_SCAN_HW, &il->status); + clear_bit(S_SCAN_ABORTING, &il->status); il_complete_scan(il, true); } @@ -127,12 +127,12 @@ static void il_do_scan_abort(struct il_priv *il) lockdep_assert_held(&il->mutex); - if (!test_bit(STATUS_SCANNING, &il->status)) { + if (!test_bit(S_SCANNING, &il->status)) { D_SCAN("Not performing scan to abort\n"); return; } - if (test_and_set_bit(STATUS_SCAN_ABORTING, &il->status)) { + if (test_and_set_bit(S_SCAN_ABORTING, &il->status)) { D_SCAN("Scan abort in progress\n"); return; } @@ -172,12 +172,12 @@ int il_scan_cancel_timeout(struct il_priv *il, unsigned long ms) il_do_scan_abort(il); while (time_before_eq(jiffies, timeout)) { - if (!test_bit(STATUS_SCAN_HW, &il->status)) + if (!test_bit(S_SCAN_HW, &il->status)) break; msleep(20); } - return test_bit(STATUS_SCAN_HW, &il->status); + return test_bit(S_SCAN_HW, &il->status); } EXPORT_SYMBOL(il_scan_cancel_timeout); @@ -251,7 +251,7 @@ static void il_rx_scan_complete_notif(struct il_priv *il, scan_notif->tsf_high, scan_notif->status); /* The HW is no longer scanning */ - clear_bit(STATUS_SCAN_HW, &il->status); + clear_bit(S_SCAN_HW, &il->status); D_SCAN("Scan on %sGHz took %dms\n", (il->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2", @@ -341,25 +341,25 @@ static int il_scan_initiate(struct il_priv *il, return -EIO; } - if (test_bit(STATUS_SCAN_HW, &il->status)) { + if (test_bit(S_SCAN_HW, &il->status)) { D_SCAN( "Multiple concurrent scan requests in parallel.\n"); return -EBUSY; } - if (test_bit(STATUS_SCAN_ABORTING, &il->status)) { + if (test_bit(S_SCAN_ABORTING, &il->status)) { D_SCAN("Scan request while abort pending.\n"); return -EBUSY; } D_SCAN("Starting scan...\n"); - set_bit(STATUS_SCANNING, &il->status); + set_bit(S_SCANNING, &il->status); il->scan_start = jiffies; ret = il->cfg->ops->utils->request_scan(il, vif); if (ret) { - clear_bit(STATUS_SCANNING, &il->status); + clear_bit(S_SCANNING, &il->status); return ret; } @@ -383,7 +383,7 @@ int il_mac_hw_scan(struct ieee80211_hw *hw, mutex_lock(&il->mutex); - if (test_bit(STATUS_SCANNING, &il->status)) { + if (test_bit(S_SCANNING, &il->status)) { D_SCAN("Scan already in progress.\n"); ret = -EAGAIN; goto out_unlock; @@ -494,11 +494,11 @@ static void il_bg_scan_completed(struct work_struct *work) mutex_lock(&il->mutex); - aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &il->status); + aborted = test_and_clear_bit(S_SCAN_ABORTING, &il->status); if (aborted) D_SCAN("Aborted scan completed.\n"); - if (!test_and_clear_bit(STATUS_SCANNING, &il->status)) { + if (!test_and_clear_bit(S_SCANNING, &il->status)) { D_SCAN("Scan already completed.\n"); goto out_settings; } diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c index e46e588..3f97d09 100644 --- a/drivers/net/wireless/iwlegacy/iwl-tx.c +++ b/drivers/net/wireless/iwlegacy/iwl-tx.c @@ -51,7 +51,7 @@ il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq) return; /* if we're trying to save power */ - if (test_bit(STATUS_POWER_PMI, &il->status)) { + if (test_bit(S_POWER_PMI, &il->status)) { /* wake up nic if it's powered down ... * uCode will wake up, and interrupt us again, so next * time we'll skip this part. */ @@ -641,7 +641,7 @@ il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb) il_hcmd_queue_reclaim(il, txq_id, idx, cmd_idx); if (!(meta->flags & CMD_ASYNC)) { - clear_bit(STATUS_HCMD_ACTIVE, &il->status); + clear_bit(S_HCMD_ACTIVE, &il->status); D_INFO("Clearing HCMD_ACTIVE for command %s\n", il_get_cmd_string(cmd->hdr.cmd)); wake_up(&il->wait_command_queue); -- 1.7.1