Return-path: Received: from mx1.redhat.com ([209.132.183.28]:45669 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756616Ab1KRIWR (ORCPT ); Fri, 18 Nov 2011 03:22:17 -0500 Received: from int-mx09.intmail.prod.int.phx2.redhat.com (int-mx09.intmail.prod.int.phx2.redhat.com [10.5.11.22]) by mx1.redhat.com (8.14.4/8.14.4) with ESMTP id pAI8MGBw032373 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for ; Fri, 18 Nov 2011 03:22:17 -0500 From: Stanislaw Gruszka To: linux-wireless@vger.kernel.org Cc: Stanislaw Gruszka Subject: [PATCH 39/77] iwlegacy: move iwl-4965-{,hw,debugfs,calib}.h to 4965.h Date: Fri, 18 Nov 2011 09:22:01 +0100 Message-Id: <1321604559-10707-39-git-send-email-sgruszka@redhat.com> (sfid-20111118_092407_096460_193F6ABC) In-Reply-To: <1321604559-10707-1-git-send-email-sgruszka@redhat.com> References: <1321604559-10707-1-git-send-email-sgruszka@redhat.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Stanislaw Gruszka --- drivers/net/wireless/iwlegacy/4965-calib.c | 2 +- drivers/net/wireless/iwlegacy/4965-debug.c | 5 +- drivers/net/wireless/iwlegacy/4965-mac.c | 10 +- drivers/net/wireless/iwlegacy/4965-rs.c | 2 +- drivers/net/wireless/iwlegacy/4965.c | 26 +- drivers/net/wireless/iwlegacy/4965.h | 1004 ++++++++++++++++++++++ drivers/net/wireless/iwlegacy/iwl-4965-calib.h | 75 -- drivers/net/wireless/iwlegacy/iwl-4965-debugfs.h | 59 -- drivers/net/wireless/iwlegacy/iwl-4965-hw.h | 811 ----------------- drivers/net/wireless/iwlegacy/iwl-4965.h | 284 ------ drivers/net/wireless/iwlegacy/iwl-commands.h | 4 +- drivers/net/wireless/iwlegacy/iwl-dev.h | 4 +- drivers/net/wireless/iwlegacy/iwl-eeprom.h | 2 +- drivers/net/wireless/iwlegacy/iwl-prph.h | 2 +- drivers/net/wireless/iwlegacy/iwl-tx.c | 2 +- 15 files changed, 1046 insertions(+), 1246 deletions(-) create mode 100644 drivers/net/wireless/iwlegacy/4965.h delete mode 100644 drivers/net/wireless/iwlegacy/iwl-4965-calib.h delete mode 100644 drivers/net/wireless/iwlegacy/iwl-4965-debugfs.h delete mode 100644 drivers/net/wireless/iwlegacy/iwl-4965-hw.h delete mode 100644 drivers/net/wireless/iwlegacy/iwl-4965.h diff --git a/drivers/net/wireless/iwlegacy/4965-calib.c b/drivers/net/wireless/iwlegacy/4965-calib.c index 1d873a6..1d0502e 100644 --- a/drivers/net/wireless/iwlegacy/4965-calib.c +++ b/drivers/net/wireless/iwlegacy/4965-calib.c @@ -65,7 +65,7 @@ #include "iwl-dev.h" #include "iwl-core.h" -#include "iwl-4965-calib.h" +#include "4965.h" /***************************************************************************** * INIT calibrations framework diff --git a/drivers/net/wireless/iwlegacy/4965-debug.c b/drivers/net/wireless/iwlegacy/4965-debug.c index 89e5828..825d0aa 100644 --- a/drivers/net/wireless/iwlegacy/4965-debug.c +++ b/drivers/net/wireless/iwlegacy/4965-debug.c @@ -25,8 +25,9 @@ * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *****************************************************************************/ -#include "iwl-4965.h" -#include "iwl-4965-debugfs.h" +#include "iwl-dev.h" +#include "iwl-core.h" +#include "4965.h" static const char *fmt_value = " %-30s %10u\n"; static const char *fmt_table = " %-30s %10u %10u %10u %10u\n"; diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index a8a6461..ee084a8 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -56,8 +56,7 @@ #include "iwl-io.h" #include "iwl-helpers.h" #include "iwl-sta.h" -#include "iwl-4965-calib.h" -#include "iwl-4965.h" +#include "4965.h" /****************************************************************************** @@ -820,6 +819,11 @@ static int il4965_get_channels_for_scan(struct il_priv *il, return added; } +static inline u32 il4965_ant_idx_to_flags(u8 ant_idx) +{ + return BIT(ant_idx) << RATE_MCS_ANT_POS; +} + int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) { struct il_host_cmd cmd = { @@ -1434,7 +1438,7 @@ void il4965_reply_stats(struct il_priv *il, * mapping. This is implemented here. * * Due to the way hw queues are set up (by the hw specific modules like - * iwl-4965.c), the AC->hw queue mapping is the identity + * 4965.c), the AC->hw queue mapping is the identity * mapping. */ diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index 4a54311..c4bf4aa 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -38,7 +38,7 @@ #include "iwl-dev.h" #include "iwl-sta.h" #include "iwl-core.h" -#include "iwl-4965.h" +#include "4965.h" #define IL4965_RS_NAME "iwl-4965-rs" diff --git a/drivers/net/wireless/iwlegacy/4965.c b/drivers/net/wireless/iwlegacy/4965.c index 752564d..8199e63 100644 --- a/drivers/net/wireless/iwlegacy/4965.c +++ b/drivers/net/wireless/iwlegacy/4965.c @@ -42,10 +42,8 @@ #include "iwl-core.h" #include "iwl-io.h" #include "iwl-helpers.h" -#include "iwl-4965-calib.h" #include "iwl-sta.h" -#include "iwl-4965.h" -#include "iwl-4965-debugfs.h" +#include "4965.h" #define IL_AC_UNSET -1 @@ -1829,6 +1827,28 @@ static inline u32 il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp) return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN; } +static inline u32 il4965_tx_status_to_mac80211(u32 status) +{ + status &= TX_STATUS_MSK; + + switch (status) { + case TX_STATUS_SUCCESS: + case TX_STATUS_DIRECT_DONE: + return IEEE80211_TX_STAT_ACK; + case TX_STATUS_FAIL_DEST_PS: + return IEEE80211_TX_STAT_TX_FILTERED; + default: + return 0; + } +} + +static inline bool il4965_is_tx_success(u32 status) +{ + status &= TX_STATUS_MSK; + return (status == TX_STATUS_SUCCESS || + status == TX_STATUS_DIRECT_DONE); +} + /** * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue */ diff --git a/drivers/net/wireless/iwlegacy/4965.h b/drivers/net/wireless/iwlegacy/4965.h new file mode 100644 index 0000000..b1a01c9 --- /dev/null +++ b/drivers/net/wireless/iwlegacy/4965.h @@ -0,0 +1,1004 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __il_4965_h__ +#define __il_4965_h__ + +#include "iwl-fh.h" +#include "iwl-debug.h" + +struct il_rx_queue; +struct il_rx_buf; +struct il_rx_pkt; +struct il_tx_queue; +struct il_rxon_context; + +/* configuration for the _4965 devices */ +extern struct il_cfg il4965_cfg; + +extern struct il_mod_params il4965_mod_params; + +extern struct ieee80211_ops il4965_hw_ops; + +/* tx queue */ +void il4965_free_tfds_in_queue(struct il_priv *il, + int sta_id, int tid, int freed); + +/* RXON */ +void il4965_set_rxon_chain(struct il_priv *il, + struct il_rxon_context *ctx); + +/* uCode */ +int il4965_verify_ucode(struct il_priv *il); + +/* lib */ +void il4965_check_abort_status(struct il_priv *il, + u8 frame_count, u32 status); + +void il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq); +int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq); +int il4965_hw_nic_init(struct il_priv *il); +int il4965_dump_fh(struct il_priv *il, char **buf, bool display); + +/* rx */ +void il4965_rx_queue_restock(struct il_priv *il); +void il4965_rx_replenish(struct il_priv *il); +void il4965_rx_replenish_now(struct il_priv *il); +void il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq); +int il4965_rxq_stop(struct il_priv *il); +int il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band); +void il4965_rx_reply_rx(struct il_priv *il, + struct il_rx_buf *rxb); +void il4965_rx_reply_rx_phy(struct il_priv *il, + struct il_rx_buf *rxb); +void il4965_rx_handle(struct il_priv *il); + +/* tx */ +void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq); +int il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, + struct il_tx_queue *txq, + dma_addr_t addr, u16 len, u8 reset, u8 pad); +int il4965_hw_tx_queue_init(struct il_priv *il, + struct il_tx_queue *txq); +void il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, + struct ieee80211_tx_info *info); +int il4965_tx_skb(struct il_priv *il, struct sk_buff *skb); +int il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid, u16 *ssn); +int il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u16 tid); +int il4965_txq_check_empty(struct il_priv *il, + int sta_id, u8 tid, int txq_id); +void il4965_rx_reply_compressed_ba(struct il_priv *il, + struct il_rx_buf *rxb); +int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx); +void il4965_hw_txq_ctx_free(struct il_priv *il); +int il4965_txq_ctx_alloc(struct il_priv *il); +void il4965_txq_ctx_reset(struct il_priv *il); +void il4965_txq_ctx_stop(struct il_priv *il); +void il4965_txq_set_sched(struct il_priv *il, u32 mask); + +/* + * Acquire il->lock before calling this function ! + */ +void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx); +/** + * il4965_tx_queue_set_status - (optionally) start Tx/Cmd queue + * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed + * @scd_retry: (1) Indicates queue will be used in aggregation mode + * + * NOTE: Acquire il->lock before calling this function ! + */ +void il4965_tx_queue_set_status(struct il_priv *il, + struct il_tx_queue *txq, + int tx_fifo_id, int scd_retry); + +u8 il4965_toggle_tx_ant(struct il_priv *il, u8 ant_idx, u8 valid); + +/* rx */ +void il4965_rx_missed_beacon_notif(struct il_priv *il, + struct il_rx_buf *rxb); +bool il4965_good_plcp_health(struct il_priv *il, + struct il_rx_pkt *pkt); +void il4965_rx_stats(struct il_priv *il, + struct il_rx_buf *rxb); +void il4965_reply_stats(struct il_priv *il, + struct il_rx_buf *rxb); + +/* scan */ +int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif); + +/* station mgmt */ +int il4965_manage_ibss_station(struct il_priv *il, + struct ieee80211_vif *vif, bool add); + +/* hcmd */ +int il4965_send_beacon_cmd(struct il_priv *il); + +#ifdef CONFIG_IWLEGACY_DEBUG +const char *il4965_get_tx_fail_reason(u32 status); +#else +static inline const char * +il4965_get_tx_fail_reason(u32 status) { return ""; } +#endif + +/* station management */ +int il4965_alloc_bcast_station(struct il_priv *il, + struct il_rxon_context *ctx); +int il4965_add_bssid_station(struct il_priv *il, + struct il_rxon_context *ctx, + const u8 *addr, u8 *sta_id_r); +int il4965_remove_default_wep_key(struct il_priv *il, + struct il_rxon_context *ctx, + struct ieee80211_key_conf *key); +int il4965_set_default_wep_key(struct il_priv *il, + struct il_rxon_context *ctx, + struct ieee80211_key_conf *key); +int il4965_restore_default_wep_keys(struct il_priv *il, + struct il_rxon_context *ctx); +int il4965_set_dynamic_key(struct il_priv *il, + struct il_rxon_context *ctx, + struct ieee80211_key_conf *key, u8 sta_id); +int il4965_remove_dynamic_key(struct il_priv *il, + struct il_rxon_context *ctx, + struct ieee80211_key_conf *key, u8 sta_id); +void il4965_update_tkip_key(struct il_priv *il, + struct il_rxon_context *ctx, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, u32 iv32, u16 *phase1key); +int il4965_sta_tx_modify_enable_tid(struct il_priv *il, + int sta_id, int tid); +int il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, + int tid, u16 ssn); +int il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, + int tid); +void il4965_sta_modify_sleep_tx_count(struct il_priv *il, + int sta_id, int cnt); +int il4965_update_bcast_stations(struct il_priv *il); + +/* rate */ +static inline u8 il4965_hw_get_rate(__le32 rate_n_flags) +{ + return le32_to_cpu(rate_n_flags) & 0xFF; +} + +static inline __le32 il4965_hw_set_rate_n_flags(u8 rate, u32 flags) +{ + return cpu_to_le32(flags|(u32)rate); +} + +/* eeprom */ +void il4965_eeprom_get_mac(const struct il_priv *il, u8 *mac); +int il4965_eeprom_acquire_semaphore(struct il_priv *il); +void il4965_eeprom_release_semaphore(struct il_priv *il); +int il4965_eeprom_check_version(struct il_priv *il); + +/* mac80211 handlers (for 4965) */ +void il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb); +int il4965_mac_start(struct ieee80211_hw *hw); +void il4965_mac_stop(struct ieee80211_hw *hw); +void il4965_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast); +int il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key); +void il4965_mac_update_tkip_key(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_key_conf *keyconf, + struct ieee80211_sta *sta, + u32 iv32, u16 *phase1key); +int il4965_mac_ampdu_action(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, u16 *ssn, + u8 buf_size); +int il4965_mac_sta_add(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); +void il4965_mac_channel_switch(struct ieee80211_hw *hw, + struct ieee80211_channel_switch *ch_switch); + +void il4965_led_enable(struct il_priv *il); + + +/* EEPROM */ +#define IL4965_EEPROM_IMG_SIZE 1024 + +/* + * uCode queue management definitions ... + * The first queue used for block-ack aggregation is #7 (4965 only). + * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7. + */ +#define IL49_FIRST_AMPDU_QUEUE 7 + +/* Sizes and addresses for instruction and data memory (SRAM) in + * 4965's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */ +#define IL49_RTC_INST_LOWER_BOUND (0x000000) +#define IL49_RTC_INST_UPPER_BOUND (0x018000) + +#define IL49_RTC_DATA_LOWER_BOUND (0x800000) +#define IL49_RTC_DATA_UPPER_BOUND (0x80A000) + +#define IL49_RTC_INST_SIZE (IL49_RTC_INST_UPPER_BOUND - \ + IL49_RTC_INST_LOWER_BOUND) +#define IL49_RTC_DATA_SIZE (IL49_RTC_DATA_UPPER_BOUND - \ + IL49_RTC_DATA_LOWER_BOUND) + +#define IL49_MAX_INST_SIZE IL49_RTC_INST_SIZE +#define IL49_MAX_DATA_SIZE IL49_RTC_DATA_SIZE + +/* Size of uCode instruction memory in bootstrap state machine */ +#define IL49_MAX_BSM_SIZE BSM_SRAM_SIZE + +static inline int il4965_hw_valid_rtc_data_addr(u32 addr) +{ + return (addr >= IL49_RTC_DATA_LOWER_BOUND && + addr < IL49_RTC_DATA_UPPER_BOUND); +} + +/********************* START TEMPERATURE *************************************/ + +/** + * 4965 temperature calculation. + * + * The driver must calculate the device temperature before calculating + * a txpower setting (amplifier gain is temperature dependent). The + * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration + * values used for the life of the driver, and one of which (R4) is the + * real-time temperature indicator. + * + * uCode provides all 4 values to the driver via the "initialize alive" + * notification (see struct il4965_init_alive_resp). After the runtime uCode + * image loads, uCode updates the R4 value via stats notifications + * (see STATISTICS_NOTIFICATION), which occur after each received beacon + * when associated, or can be requested via REPLY_STATISTICS_CMD. + * + * NOTE: uCode provides the R4 value as a 23-bit signed value. Driver + * must sign-extend to 32 bits before applying formula below. + * + * Formula: + * + * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8 + * + * NOTE: The basic formula is 259 * (R4-R2) / (R3-R1). The 97/100 is + * an additional correction, which should be centered around 0 degrees + * Celsius (273 degrees Kelvin). The 8 (3 percent of 273) compensates for + * centering the 97/100 correction around 0 degrees K. + * + * Add 273 to Kelvin value to find degrees Celsius, for comparing current + * temperature with factory-measured temperatures when calculating txpower + * settings. + */ +#define TEMPERATURE_CALIB_KELVIN_OFFSET 8 +#define TEMPERATURE_CALIB_A_VAL 259 + +/* Limit range of calculated temperature to be between these Kelvin values */ +#define IL_TX_POWER_TEMPERATURE_MIN (263) +#define IL_TX_POWER_TEMPERATURE_MAX (410) + +#define IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \ + ((t) < IL_TX_POWER_TEMPERATURE_MIN || \ + (t) > IL_TX_POWER_TEMPERATURE_MAX) + +/********************* END TEMPERATURE ***************************************/ + +/********************* START TXPOWER *****************************************/ + +/** + * 4965 txpower calculations rely on information from three sources: + * + * 1) EEPROM + * 2) "initialize" alive notification + * 3) stats notifications + * + * EEPROM data consists of: + * + * 1) Regulatory information (max txpower and channel usage flags) is provided + * separately for each channel that can possibly supported by 4965. + * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz + * (legacy) channels. + * + * See struct il4965_eeprom_channel for format, and struct il4965_eeprom + * for locations in EEPROM. + * + * 2) Factory txpower calibration information is provided separately for + * sub-bands of contiguous channels. 2.4GHz has just one sub-band, + * but 5 GHz has several sub-bands. + * + * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided. + * + * See struct il4965_eeprom_calib_info (and the tree of structures + * contained within it) for format, and struct il4965_eeprom for + * locations in EEPROM. + * + * "Initialization alive" notification (see struct il4965_init_alive_resp) + * consists of: + * + * 1) Temperature calculation parameters. + * + * 2) Power supply voltage measurement. + * + * 3) Tx gain compensation to balance 2 transmitters for MIMO use. + * + * Statistics notifications deliver: + * + * 1) Current values for temperature param R4. + */ + +/** + * To calculate a txpower setting for a given desired target txpower, channel, + * modulation bit rate, and transmitter chain (4965 has 2 transmitters to + * support MIMO and transmit diversity), driver must do the following: + * + * 1) Compare desired txpower vs. (EEPROM) regulatory limit for this channel. + * Do not exceed regulatory limit; reduce target txpower if necessary. + * + * If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31), + * 2 transmitters will be used simultaneously; driver must reduce the + * regulatory limit by 3 dB (half-power) for each transmitter, so the + * combined total output of the 2 transmitters is within regulatory limits. + * + * + * 2) Compare target txpower vs. (EEPROM) saturation txpower *reduced by + * backoff for this bit rate*. Do not exceed (saturation - backoff[rate]); + * reduce target txpower if necessary. + * + * Backoff values below are in 1/2 dB units (equivalent to steps in + * txpower gain tables): + * + * OFDM 6 - 36 MBit: 10 steps (5 dB) + * OFDM 48 MBit: 15 steps (7.5 dB) + * OFDM 54 MBit: 17 steps (8.5 dB) + * OFDM 60 MBit: 20 steps (10 dB) + * CCK all rates: 10 steps (5 dB) + * + * Backoff values apply to saturation txpower on a per-transmitter basis; + * when using MIMO (2 transmitters), each transmitter uses the same + * saturation level provided in EEPROM, and the same backoff values; + * no reduction (such as with regulatory txpower limits) is required. + * + * Saturation and Backoff values apply equally to 20 Mhz (legacy) channel + * widths and 40 Mhz (.11n HT40) channel widths; there is no separate + * factory measurement for ht40 channels. + * + * The result of this step is the final target txpower. The rest of + * the steps figure out the proper settings for the device to achieve + * that target txpower. + * + * + * 3) Determine (EEPROM) calibration sub band for the target channel, by + * comparing against first and last channels in each sub band + * (see struct il4965_eeprom_calib_subband_info). + * + * + * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, + * referencing the 2 factory-measured (sample) channels within the sub band. + * + * Interpolation is based on difference between target channel's frequency + * and the sample channels' frequencies. Since channel numbers are based + * on frequency (5 MHz between each channel number), this is equivalent + * to interpolating based on channel number differences. + * + * Note that the sample channels may or may not be the channels at the + * edges of the sub band. The target channel may be "outside" of the + * span of the sampled channels. + * + * Driver may choose the pair (for 2 Tx chains) of measurements (see + * struct il4965_eeprom_calib_ch_info) for which the actual measured + * txpower comes closest to the desired txpower. Usually, though, + * the middle set of measurements is closest to the regulatory limits, + * and is therefore a good choice for all txpower calculations (this + * assumes that high accuracy is needed for maximizing legal txpower, + * while lower txpower configurations do not need as much accuracy). + * + * Driver should interpolate both members of the chosen measurement pair, + * i.e. for both Tx chains (radio transmitters), unless the driver knows + * that only one of the chains will be used (e.g. only one tx antenna + * connected, but this should be unusual). The rate scaling algorithm + * switches antennas to find best performance, so both Tx chains will + * be used (although only one at a time) even for non-MIMO transmissions. + * + * Driver should interpolate factory values for temperature, gain table + * idx, and actual power. The power amplifier detector values are + * not used by the driver. + * + * Sanity check: If the target channel happens to be one of the sample + * channels, the results should agree with the sample channel's + * measurements! + * + * + * 5) Find difference between desired txpower and (interpolated) + * factory-measured txpower. Using (interpolated) factory gain table idx + * (shown elsewhere) as a starting point, adjust this idx lower to + * increase txpower, or higher to decrease txpower, until the target + * txpower is reached. Each step in the gain table is 1/2 dB. + * + * For example, if factory measured txpower is 16 dBm, and target txpower + * is 13 dBm, add 6 steps to the factory gain idx to reduce txpower + * by 3 dB. + * + * + * 6) Find difference between current device temperature and (interpolated) + * factory-measured temperature for sub-band. Factory values are in + * degrees Celsius. To calculate current temperature, see comments for + * "4965 temperature calculation". + * + * If current temperature is higher than factory temperature, driver must + * increase gain (lower gain table idx), and vice verse. + * + * Temperature affects gain differently for different channels: + * + * 2.4 GHz all channels: 3.5 degrees per half-dB step + * 5 GHz channels 34-43: 4.5 degrees per half-dB step + * 5 GHz channels >= 44: 4.0 degrees per half-dB step + * + * NOTE: Temperature can increase rapidly when transmitting, especially + * with heavy traffic at high txpowers. Driver should update + * temperature calculations often under these conditions to + * maintain strong txpower in the face of rising temperature. + * + * + * 7) Find difference between current power supply voltage indicator + * (from "initialize alive") and factory-measured power supply voltage + * indicator (EEPROM). + * + * If the current voltage is higher (indicator is lower) than factory + * voltage, gain should be reduced (gain table idx increased) by: + * + * (eeprom - current) / 7 + * + * If the current voltage is lower (indicator is higher) than factory + * voltage, gain should be increased (gain table idx decreased) by: + * + * 2 * (current - eeprom) / 7 + * + * If number of idx steps in either direction turns out to be > 2, + * something is wrong ... just use 0. + * + * NOTE: Voltage compensation is independent of band/channel. + * + * NOTE: "Initialize" uCode measures current voltage, which is assumed + * to be constant after this initial measurement. Voltage + * compensation for txpower (number of steps in gain table) + * may be calculated once and used until the next uCode bootload. + * + * + * 8) If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31), + * adjust txpower for each transmitter chain, so txpower is balanced + * between the two chains. There are 5 pairs of tx_atten[group][chain] + * values in "initialize alive", one pair for each of 5 channel ranges: + * + * Group 0: 5 GHz channel 34-43 + * Group 1: 5 GHz channel 44-70 + * Group 2: 5 GHz channel 71-124 + * Group 3: 5 GHz channel 125-200 + * Group 4: 2.4 GHz all channels + * + * Add the tx_atten[group][chain] value to the idx for the target chain. + * The values are signed, but are in pairs of 0 and a non-negative number, + * so as to reduce gain (if necessary) of the "hotter" channel. This + * avoids any need to double-check for regulatory compliance after + * this step. + * + * + * 9) If setting up for a CCK rate, lower the gain by adding a CCK compensation + * value to the idx: + * + * Hardware rev B: 9 steps (4.5 dB) + * Hardware rev C: 5 steps (2.5 dB) + * + * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, + * bits [3:2], 1 = B, 2 = C. + * + * NOTE: This compensation is in addition to any saturation backoff that + * might have been applied in an earlier step. + * + * + * 10) Select the gain table, based on band (2.4 vs 5 GHz). + * + * Limit the adjusted idx to stay within the table! + * + * + * 11) Read gain table entries for DSP and radio gain, place into appropriate + * location(s) in command (struct il4965_txpowertable_cmd). + */ + +/** + * When MIMO is used (2 transmitters operating simultaneously), driver should + * limit each transmitter to deliver a max of 3 dB below the regulatory limit + * for the device. That is, use half power for each transmitter, so total + * txpower is within regulatory limits. + * + * The value "6" represents number of steps in gain table to reduce power 3 dB. + * Each step is 1/2 dB. + */ +#define IL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6) + +/** + * CCK gain compensation. + * + * When calculating txpowers for CCK, after making sure that the target power + * is within regulatory and saturation limits, driver must additionally + * back off gain by adding these values to the gain table idx. + * + * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, + * bits [3:2], 1 = B, 2 = C. + */ +#define IL_TX_POWER_CCK_COMPENSATION_B_STEP (9) +#define IL_TX_POWER_CCK_COMPENSATION_C_STEP (5) + +/* + * 4965 power supply voltage compensation for txpower + */ +#define TX_POWER_IL_VOLTAGE_CODES_PER_03V (7) + +/** + * Gain tables. + * + * The following tables contain pair of values for setting txpower, i.e. + * gain settings for the output of the device's digital signal processor (DSP), + * and for the analog gain structure of the transmitter. + * + * Each entry in the gain tables represents a step of 1/2 dB. Note that these + * are *relative* steps, not indications of absolute output power. Output + * power varies with temperature, voltage, and channel frequency, and also + * requires consideration of average power (to satisfy regulatory constraints), + * and peak power (to avoid distortion of the output signal). + * + * Each entry contains two values: + * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained + * linear value that multiplies the output of the digital signal processor, + * before being sent to the analog radio. + * 2) Radio gain. This sets the analog gain of the radio Tx path. + * It is a coarser setting, and behaves in a logarithmic (dB) fashion. + * + * EEPROM contains factory calibration data for txpower. This maps actual + * measured txpower levels to gain settings in the "well known" tables + * below ("well-known" means here that both factory calibration *and* the + * driver work with the same table). + * + * There are separate tables for 2.4 GHz and 5 GHz bands. The 5 GHz table + * has an extension (into negative idxes), in case the driver needs to + * boost power setting for high device temperatures (higher than would be + * present during factory calibration). A 5 Ghz EEPROM idx of "40" + * corresponds to the 49th entry in the table used by the driver. + */ +#define MIN_TX_GAIN_IDX (0) /* highest gain, lowest idx, 2.4 */ +#define MIN_TX_GAIN_IDX_52GHZ_EXT (-9) /* highest gain, lowest idx, 5 */ + +/** + * 2.4 GHz gain table + * + * Index Dsp gain Radio gain + * 0 110 0x3f (highest gain) + * 1 104 0x3f + * 2 98 0x3f + * 3 110 0x3e + * 4 104 0x3e + * 5 98 0x3e + * 6 110 0x3d + * 7 104 0x3d + * 8 98 0x3d + * 9 110 0x3c + * 10 104 0x3c + * 11 98 0x3c + * 12 110 0x3b + * 13 104 0x3b + * 14 98 0x3b + * 15 110 0x3a + * 16 104 0x3a + * 17 98 0x3a + * 18 110 0x39 + * 19 104 0x39 + * 20 98 0x39 + * 21 110 0x38 + * 22 104 0x38 + * 23 98 0x38 + * 24 110 0x37 + * 25 104 0x37 + * 26 98 0x37 + * 27 110 0x36 + * 28 104 0x36 + * 29 98 0x36 + * 30 110 0x35 + * 31 104 0x35 + * 32 98 0x35 + * 33 110 0x34 + * 34 104 0x34 + * 35 98 0x34 + * 36 110 0x33 + * 37 104 0x33 + * 38 98 0x33 + * 39 110 0x32 + * 40 104 0x32 + * 41 98 0x32 + * 42 110 0x31 + * 43 104 0x31 + * 44 98 0x31 + * 45 110 0x30 + * 46 104 0x30 + * 47 98 0x30 + * 48 110 0x6 + * 49 104 0x6 + * 50 98 0x6 + * 51 110 0x5 + * 52 104 0x5 + * 53 98 0x5 + * 54 110 0x4 + * 55 104 0x4 + * 56 98 0x4 + * 57 110 0x3 + * 58 104 0x3 + * 59 98 0x3 + * 60 110 0x2 + * 61 104 0x2 + * 62 98 0x2 + * 63 110 0x1 + * 64 104 0x1 + * 65 98 0x1 + * 66 110 0x0 + * 67 104 0x0 + * 68 98 0x0 + * 69 97 0 + * 70 96 0 + * 71 95 0 + * 72 94 0 + * 73 93 0 + * 74 92 0 + * 75 91 0 + * 76 90 0 + * 77 89 0 + * 78 88 0 + * 79 87 0 + * 80 86 0 + * 81 85 0 + * 82 84 0 + * 83 83 0 + * 84 82 0 + * 85 81 0 + * 86 80 0 + * 87 79 0 + * 88 78 0 + * 89 77 0 + * 90 76 0 + * 91 75 0 + * 92 74 0 + * 93 73 0 + * 94 72 0 + * 95 71 0 + * 96 70 0 + * 97 69 0 + * 98 68 0 + */ + +/** + * 5 GHz gain table + * + * Index Dsp gain Radio gain + * -9 123 0x3F (highest gain) + * -8 117 0x3F + * -7 110 0x3F + * -6 104 0x3F + * -5 98 0x3F + * -4 110 0x3E + * -3 104 0x3E + * -2 98 0x3E + * -1 110 0x3D + * 0 104 0x3D + * 1 98 0x3D + * 2 110 0x3C + * 3 104 0x3C + * 4 98 0x3C + * 5 110 0x3B + * 6 104 0x3B + * 7 98 0x3B + * 8 110 0x3A + * 9 104 0x3A + * 10 98 0x3A + * 11 110 0x39 + * 12 104 0x39 + * 13 98 0x39 + * 14 110 0x38 + * 15 104 0x38 + * 16 98 0x38 + * 17 110 0x37 + * 18 104 0x37 + * 19 98 0x37 + * 20 110 0x36 + * 21 104 0x36 + * 22 98 0x36 + * 23 110 0x35 + * 24 104 0x35 + * 25 98 0x35 + * 26 110 0x34 + * 27 104 0x34 + * 28 98 0x34 + * 29 110 0x33 + * 30 104 0x33 + * 31 98 0x33 + * 32 110 0x32 + * 33 104 0x32 + * 34 98 0x32 + * 35 110 0x31 + * 36 104 0x31 + * 37 98 0x31 + * 38 110 0x30 + * 39 104 0x30 + * 40 98 0x30 + * 41 110 0x25 + * 42 104 0x25 + * 43 98 0x25 + * 44 110 0x24 + * 45 104 0x24 + * 46 98 0x24 + * 47 110 0x23 + * 48 104 0x23 + * 49 98 0x23 + * 50 110 0x22 + * 51 104 0x18 + * 52 98 0x18 + * 53 110 0x17 + * 54 104 0x17 + * 55 98 0x17 + * 56 110 0x16 + * 57 104 0x16 + * 58 98 0x16 + * 59 110 0x15 + * 60 104 0x15 + * 61 98 0x15 + * 62 110 0x14 + * 63 104 0x14 + * 64 98 0x14 + * 65 110 0x13 + * 66 104 0x13 + * 67 98 0x13 + * 68 110 0x12 + * 69 104 0x08 + * 70 98 0x08 + * 71 110 0x07 + * 72 104 0x07 + * 73 98 0x07 + * 74 110 0x06 + * 75 104 0x06 + * 76 98 0x06 + * 77 110 0x05 + * 78 104 0x05 + * 79 98 0x05 + * 80 110 0x04 + * 81 104 0x04 + * 82 98 0x04 + * 83 110 0x03 + * 84 104 0x03 + * 85 98 0x03 + * 86 110 0x02 + * 87 104 0x02 + * 88 98 0x02 + * 89 110 0x01 + * 90 104 0x01 + * 91 98 0x01 + * 92 110 0x00 + * 93 104 0x00 + * 94 98 0x00 + * 95 93 0x00 + * 96 88 0x00 + * 97 83 0x00 + * 98 78 0x00 + */ + + +/** + * Sanity checks and default values for EEPROM regulatory levels. + * If EEPROM values fall outside MIN/MAX range, use default values. + * + * Regulatory limits refer to the maximum average txpower allowed by + * regulatory agencies in the geographies in which the device is meant + * to be operated. These limits are SKU-specific (i.e. geography-specific), + * and channel-specific; each channel has an individual regulatory limit + * listed in the EEPROM. + * + * Units are in half-dBm (i.e. "34" means 17 dBm). + */ +#define IL_TX_POWER_DEFAULT_REGULATORY_24 (34) +#define IL_TX_POWER_DEFAULT_REGULATORY_52 (34) +#define IL_TX_POWER_REGULATORY_MIN (0) +#define IL_TX_POWER_REGULATORY_MAX (34) + +/** + * Sanity checks and default values for EEPROM saturation levels. + * If EEPROM values fall outside MIN/MAX range, use default values. + * + * Saturation is the highest level that the output power amplifier can produce + * without significant clipping distortion. This is a "peak" power level. + * Different types of modulation (i.e. various "rates", and OFDM vs. CCK) + * require differing amounts of backoff, relative to their average power output, + * in order to avoid clipping distortion. + * + * Driver must make sure that it is violating neither the saturation limit, + * nor the regulatory limit, when calculating Tx power settings for various + * rates. + * + * Units are in half-dBm (i.e. "38" means 19 dBm). + */ +#define IL_TX_POWER_DEFAULT_SATURATION_24 (38) +#define IL_TX_POWER_DEFAULT_SATURATION_52 (38) +#define IL_TX_POWER_SATURATION_MIN (20) +#define IL_TX_POWER_SATURATION_MAX (50) + +/** + * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance) + * and thermal Txpower calibration. + * + * When calculating txpower, driver must compensate for current device + * temperature; higher temperature requires higher gain. Driver must calculate + * current temperature (see "4965 temperature calculation"), then compare vs. + * factory calibration temperature in EEPROM; if current temperature is higher + * than factory temperature, driver must *increase* gain by proportions shown + * in table below. If current temperature is lower than factory, driver must + * *decrease* gain. + * + * Different frequency ranges require different compensation, as shown below. + */ +/* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR1_FCH 34 +#define CALIB_IL_TX_ATTEN_GR1_LCH 43 + +/* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR2_FCH 44 +#define CALIB_IL_TX_ATTEN_GR2_LCH 70 + +/* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR3_FCH 71 +#define CALIB_IL_TX_ATTEN_GR3_LCH 124 + +/* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR4_FCH 125 +#define CALIB_IL_TX_ATTEN_GR4_LCH 200 + +/* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */ +#define CALIB_IL_TX_ATTEN_GR5_FCH 1 +#define CALIB_IL_TX_ATTEN_GR5_LCH 20 + +enum { + CALIB_CH_GROUP_1 = 0, + CALIB_CH_GROUP_2 = 1, + CALIB_CH_GROUP_3 = 2, + CALIB_CH_GROUP_4 = 3, + CALIB_CH_GROUP_5 = 4, + CALIB_CH_GROUP_MAX +}; + +/********************* END TXPOWER *****************************************/ + + +/** + * Tx/Rx Queues + * + * Most communication between driver and 4965 is via queues of data buffers. + * For example, all commands that the driver issues to device's embedded + * controller (uCode) are via the command queue (one of the Tx queues). All + * uCode command responses/replies/notifications, including Rx frames, are + * conveyed from uCode to driver via the Rx queue. + * + * Most support for these queues, including handshake support, resides in + * structures in host DRAM, shared between the driver and the device. When + * allocating this memory, the driver must make sure that data written by + * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's + * cache memory), so DRAM and cache are consistent, and the device can + * immediately see changes made by the driver. + * + * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via + * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array + * in DRAM containing 256 Transmit Frame Descriptors (TFDs). + */ +#define IL49_NUM_FIFOS 7 +#define IL49_CMD_FIFO_NUM 4 +#define IL49_NUM_QUEUES 16 +#define IL49_NUM_AMPDU_QUEUES 8 + + +/** + * struct il4965_schedq_bc_tbl + * + * Byte Count table + * + * Each Tx queue uses a byte-count table containing 320 entries: + * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that + * duplicate the first 64 entries (to avoid wrap-around within a Tx win; + * max Tx win is 64 TFDs). + * + * When driver sets up a new TFD, it must also enter the total byte count + * of the frame to be transmitted into the corresponding entry in the byte + * count table for the chosen Tx queue. If the TFD idx is 0-63, the driver + * must duplicate the byte count entry in corresponding idx 256-319. + * + * padding puts each byte count table on a 1024-byte boundary; + * 4965 assumes tables are separated by 1024 bytes. + */ +struct il4965_scd_bc_tbl { + __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; + u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)]; +} __packed; + + +#define IL4965_RTC_INST_LOWER_BOUND (0x000000) + +/* RSSI to dBm */ +#define IL4965_RSSI_OFFSET 44 + +/* PCI registers */ +#define PCI_CFG_RETRY_TIMEOUT 0x041 + +/* PCI register values */ +#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01 +#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02 + +#define IL4965_DEFAULT_TX_RETRY 15 + +/* EEPROM */ +#define IL4965_FIRST_AMPDU_QUEUE 10 + +/* Calibration */ +void il4965_chain_noise_calibration(struct il_priv *il, void *stat_resp); +void il4965_sensitivity_calibration(struct il_priv *il, void *resp); +void il4965_init_sensitivity(struct il_priv *il); +void il4965_reset_run_time_calib(struct il_priv *il); +void il4965_calib_free_results(struct il_priv *il); + +/* Debug */ +#ifdef CONFIG_IWLEGACY_DEBUGFS +ssize_t il4965_ucode_rx_stats_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); +ssize_t il4965_ucode_tx_stats_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); +ssize_t il4965_ucode_general_stats_read(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos); +#else +static ssize_t +il4965_ucode_rx_stats_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + return 0; +} +static ssize_t +il4965_ucode_tx_stats_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + return 0; +} +static ssize_t +il4965_ucode_general_stats_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + return 0; +} +#endif + +#endif /* __il_4965_h__ */ diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-calib.h b/drivers/net/wireless/iwlegacy/iwl-4965-calib.h deleted file mode 100644 index 0e30ea7..0000000 --- a/drivers/net/wireless/iwlegacy/iwl-4965-calib.h +++ /dev/null @@ -1,75 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ -#ifndef __il_4965_calib_h__ -#define __il_4965_calib_h__ - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-commands.h" - -void il4965_chain_noise_calibration(struct il_priv *il, void *stat_resp); -void il4965_sensitivity_calibration(struct il_priv *il, void *resp); -void il4965_init_sensitivity(struct il_priv *il); -void il4965_reset_run_time_calib(struct il_priv *il); -void il4965_calib_free_results(struct il_priv *il); - -#endif /* __il_4965_calib_h__ */ diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-debugfs.h b/drivers/net/wireless/iwlegacy/iwl-4965-debugfs.h deleted file mode 100644 index 284604c..0000000 --- a/drivers/net/wireless/iwlegacy/iwl-4965-debugfs.h +++ /dev/null @@ -1,59 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-debug.h" - -#ifdef CONFIG_IWLEGACY_DEBUGFS -ssize_t il4965_ucode_rx_stats_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos); -ssize_t il4965_ucode_tx_stats_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos); -ssize_t il4965_ucode_general_stats_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos); -#else -static ssize_t -il4965_ucode_rx_stats_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - return 0; -} -static ssize_t -il4965_ucode_tx_stats_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - return 0; -} -static ssize_t -il4965_ucode_general_stats_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - return 0; -} -#endif diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-hw.h b/drivers/net/wireless/iwlegacy/iwl-4965-hw.h deleted file mode 100644 index 5c8b8ba..0000000 --- a/drivers/net/wireless/iwlegacy/iwl-4965-hw.h +++ /dev/null @@ -1,811 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -/* - * Please use this file (iwl-4965-hw.h) only for hardware-related definitions. - * Use iwl-commands.h for uCode API definitions. - * Use iwl-dev.h for driver implementation definitions. - */ - -#ifndef __il_4965_hw_h__ -#define __il_4965_hw_h__ - -#include "iwl-fh.h" - -/* EEPROM */ -#define IL4965_EEPROM_IMG_SIZE 1024 - -/* - * uCode queue management definitions ... - * The first queue used for block-ack aggregation is #7 (4965 only). - * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7. - */ -#define IL49_FIRST_AMPDU_QUEUE 7 - -/* Sizes and addresses for instruction and data memory (SRAM) in - * 4965's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */ -#define IL49_RTC_INST_LOWER_BOUND (0x000000) -#define IL49_RTC_INST_UPPER_BOUND (0x018000) - -#define IL49_RTC_DATA_LOWER_BOUND (0x800000) -#define IL49_RTC_DATA_UPPER_BOUND (0x80A000) - -#define IL49_RTC_INST_SIZE (IL49_RTC_INST_UPPER_BOUND - \ - IL49_RTC_INST_LOWER_BOUND) -#define IL49_RTC_DATA_SIZE (IL49_RTC_DATA_UPPER_BOUND - \ - IL49_RTC_DATA_LOWER_BOUND) - -#define IL49_MAX_INST_SIZE IL49_RTC_INST_SIZE -#define IL49_MAX_DATA_SIZE IL49_RTC_DATA_SIZE - -/* Size of uCode instruction memory in bootstrap state machine */ -#define IL49_MAX_BSM_SIZE BSM_SRAM_SIZE - -static inline int il4965_hw_valid_rtc_data_addr(u32 addr) -{ - return (addr >= IL49_RTC_DATA_LOWER_BOUND && - addr < IL49_RTC_DATA_UPPER_BOUND); -} - -/********************* START TEMPERATURE *************************************/ - -/** - * 4965 temperature calculation. - * - * The driver must calculate the device temperature before calculating - * a txpower setting (amplifier gain is temperature dependent). The - * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration - * values used for the life of the driver, and one of which (R4) is the - * real-time temperature indicator. - * - * uCode provides all 4 values to the driver via the "initialize alive" - * notification (see struct il4965_init_alive_resp). After the runtime uCode - * image loads, uCode updates the R4 value via stats notifications - * (see STATISTICS_NOTIFICATION), which occur after each received beacon - * when associated, or can be requested via REPLY_STATISTICS_CMD. - * - * NOTE: uCode provides the R4 value as a 23-bit signed value. Driver - * must sign-extend to 32 bits before applying formula below. - * - * Formula: - * - * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8 - * - * NOTE: The basic formula is 259 * (R4-R2) / (R3-R1). The 97/100 is - * an additional correction, which should be centered around 0 degrees - * Celsius (273 degrees Kelvin). The 8 (3 percent of 273) compensates for - * centering the 97/100 correction around 0 degrees K. - * - * Add 273 to Kelvin value to find degrees Celsius, for comparing current - * temperature with factory-measured temperatures when calculating txpower - * settings. - */ -#define TEMPERATURE_CALIB_KELVIN_OFFSET 8 -#define TEMPERATURE_CALIB_A_VAL 259 - -/* Limit range of calculated temperature to be between these Kelvin values */ -#define IL_TX_POWER_TEMPERATURE_MIN (263) -#define IL_TX_POWER_TEMPERATURE_MAX (410) - -#define IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \ - ((t) < IL_TX_POWER_TEMPERATURE_MIN || \ - (t) > IL_TX_POWER_TEMPERATURE_MAX) - -/********************* END TEMPERATURE ***************************************/ - -/********************* START TXPOWER *****************************************/ - -/** - * 4965 txpower calculations rely on information from three sources: - * - * 1) EEPROM - * 2) "initialize" alive notification - * 3) stats notifications - * - * EEPROM data consists of: - * - * 1) Regulatory information (max txpower and channel usage flags) is provided - * separately for each channel that can possibly supported by 4965. - * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz - * (legacy) channels. - * - * See struct il4965_eeprom_channel for format, and struct il4965_eeprom - * for locations in EEPROM. - * - * 2) Factory txpower calibration information is provided separately for - * sub-bands of contiguous channels. 2.4GHz has just one sub-band, - * but 5 GHz has several sub-bands. - * - * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided. - * - * See struct il4965_eeprom_calib_info (and the tree of structures - * contained within it) for format, and struct il4965_eeprom for - * locations in EEPROM. - * - * "Initialization alive" notification (see struct il4965_init_alive_resp) - * consists of: - * - * 1) Temperature calculation parameters. - * - * 2) Power supply voltage measurement. - * - * 3) Tx gain compensation to balance 2 transmitters for MIMO use. - * - * Statistics notifications deliver: - * - * 1) Current values for temperature param R4. - */ - -/** - * To calculate a txpower setting for a given desired target txpower, channel, - * modulation bit rate, and transmitter chain (4965 has 2 transmitters to - * support MIMO and transmit diversity), driver must do the following: - * - * 1) Compare desired txpower vs. (EEPROM) regulatory limit for this channel. - * Do not exceed regulatory limit; reduce target txpower if necessary. - * - * If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31), - * 2 transmitters will be used simultaneously; driver must reduce the - * regulatory limit by 3 dB (half-power) for each transmitter, so the - * combined total output of the 2 transmitters is within regulatory limits. - * - * - * 2) Compare target txpower vs. (EEPROM) saturation txpower *reduced by - * backoff for this bit rate*. Do not exceed (saturation - backoff[rate]); - * reduce target txpower if necessary. - * - * Backoff values below are in 1/2 dB units (equivalent to steps in - * txpower gain tables): - * - * OFDM 6 - 36 MBit: 10 steps (5 dB) - * OFDM 48 MBit: 15 steps (7.5 dB) - * OFDM 54 MBit: 17 steps (8.5 dB) - * OFDM 60 MBit: 20 steps (10 dB) - * CCK all rates: 10 steps (5 dB) - * - * Backoff values apply to saturation txpower on a per-transmitter basis; - * when using MIMO (2 transmitters), each transmitter uses the same - * saturation level provided in EEPROM, and the same backoff values; - * no reduction (such as with regulatory txpower limits) is required. - * - * Saturation and Backoff values apply equally to 20 Mhz (legacy) channel - * widths and 40 Mhz (.11n HT40) channel widths; there is no separate - * factory measurement for ht40 channels. - * - * The result of this step is the final target txpower. The rest of - * the steps figure out the proper settings for the device to achieve - * that target txpower. - * - * - * 3) Determine (EEPROM) calibration sub band for the target channel, by - * comparing against first and last channels in each sub band - * (see struct il4965_eeprom_calib_subband_info). - * - * - * 4) Linearly interpolate (EEPROM) factory calibration measurement sets, - * referencing the 2 factory-measured (sample) channels within the sub band. - * - * Interpolation is based on difference between target channel's frequency - * and the sample channels' frequencies. Since channel numbers are based - * on frequency (5 MHz between each channel number), this is equivalent - * to interpolating based on channel number differences. - * - * Note that the sample channels may or may not be the channels at the - * edges of the sub band. The target channel may be "outside" of the - * span of the sampled channels. - * - * Driver may choose the pair (for 2 Tx chains) of measurements (see - * struct il4965_eeprom_calib_ch_info) for which the actual measured - * txpower comes closest to the desired txpower. Usually, though, - * the middle set of measurements is closest to the regulatory limits, - * and is therefore a good choice for all txpower calculations (this - * assumes that high accuracy is needed for maximizing legal txpower, - * while lower txpower configurations do not need as much accuracy). - * - * Driver should interpolate both members of the chosen measurement pair, - * i.e. for both Tx chains (radio transmitters), unless the driver knows - * that only one of the chains will be used (e.g. only one tx antenna - * connected, but this should be unusual). The rate scaling algorithm - * switches antennas to find best performance, so both Tx chains will - * be used (although only one at a time) even for non-MIMO transmissions. - * - * Driver should interpolate factory values for temperature, gain table - * idx, and actual power. The power amplifier detector values are - * not used by the driver. - * - * Sanity check: If the target channel happens to be one of the sample - * channels, the results should agree with the sample channel's - * measurements! - * - * - * 5) Find difference between desired txpower and (interpolated) - * factory-measured txpower. Using (interpolated) factory gain table idx - * (shown elsewhere) as a starting point, adjust this idx lower to - * increase txpower, or higher to decrease txpower, until the target - * txpower is reached. Each step in the gain table is 1/2 dB. - * - * For example, if factory measured txpower is 16 dBm, and target txpower - * is 13 dBm, add 6 steps to the factory gain idx to reduce txpower - * by 3 dB. - * - * - * 6) Find difference between current device temperature and (interpolated) - * factory-measured temperature for sub-band. Factory values are in - * degrees Celsius. To calculate current temperature, see comments for - * "4965 temperature calculation". - * - * If current temperature is higher than factory temperature, driver must - * increase gain (lower gain table idx), and vice verse. - * - * Temperature affects gain differently for different channels: - * - * 2.4 GHz all channels: 3.5 degrees per half-dB step - * 5 GHz channels 34-43: 4.5 degrees per half-dB step - * 5 GHz channels >= 44: 4.0 degrees per half-dB step - * - * NOTE: Temperature can increase rapidly when transmitting, especially - * with heavy traffic at high txpowers. Driver should update - * temperature calculations often under these conditions to - * maintain strong txpower in the face of rising temperature. - * - * - * 7) Find difference between current power supply voltage indicator - * (from "initialize alive") and factory-measured power supply voltage - * indicator (EEPROM). - * - * If the current voltage is higher (indicator is lower) than factory - * voltage, gain should be reduced (gain table idx increased) by: - * - * (eeprom - current) / 7 - * - * If the current voltage is lower (indicator is higher) than factory - * voltage, gain should be increased (gain table idx decreased) by: - * - * 2 * (current - eeprom) / 7 - * - * If number of idx steps in either direction turns out to be > 2, - * something is wrong ... just use 0. - * - * NOTE: Voltage compensation is independent of band/channel. - * - * NOTE: "Initialize" uCode measures current voltage, which is assumed - * to be constant after this initial measurement. Voltage - * compensation for txpower (number of steps in gain table) - * may be calculated once and used until the next uCode bootload. - * - * - * 8) If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31), - * adjust txpower for each transmitter chain, so txpower is balanced - * between the two chains. There are 5 pairs of tx_atten[group][chain] - * values in "initialize alive", one pair for each of 5 channel ranges: - * - * Group 0: 5 GHz channel 34-43 - * Group 1: 5 GHz channel 44-70 - * Group 2: 5 GHz channel 71-124 - * Group 3: 5 GHz channel 125-200 - * Group 4: 2.4 GHz all channels - * - * Add the tx_atten[group][chain] value to the idx for the target chain. - * The values are signed, but are in pairs of 0 and a non-negative number, - * so as to reduce gain (if necessary) of the "hotter" channel. This - * avoids any need to double-check for regulatory compliance after - * this step. - * - * - * 9) If setting up for a CCK rate, lower the gain by adding a CCK compensation - * value to the idx: - * - * Hardware rev B: 9 steps (4.5 dB) - * Hardware rev C: 5 steps (2.5 dB) - * - * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, - * bits [3:2], 1 = B, 2 = C. - * - * NOTE: This compensation is in addition to any saturation backoff that - * might have been applied in an earlier step. - * - * - * 10) Select the gain table, based on band (2.4 vs 5 GHz). - * - * Limit the adjusted idx to stay within the table! - * - * - * 11) Read gain table entries for DSP and radio gain, place into appropriate - * location(s) in command (struct il4965_txpowertable_cmd). - */ - -/** - * When MIMO is used (2 transmitters operating simultaneously), driver should - * limit each transmitter to deliver a max of 3 dB below the regulatory limit - * for the device. That is, use half power for each transmitter, so total - * txpower is within regulatory limits. - * - * The value "6" represents number of steps in gain table to reduce power 3 dB. - * Each step is 1/2 dB. - */ -#define IL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6) - -/** - * CCK gain compensation. - * - * When calculating txpowers for CCK, after making sure that the target power - * is within regulatory and saturation limits, driver must additionally - * back off gain by adding these values to the gain table idx. - * - * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG, - * bits [3:2], 1 = B, 2 = C. - */ -#define IL_TX_POWER_CCK_COMPENSATION_B_STEP (9) -#define IL_TX_POWER_CCK_COMPENSATION_C_STEP (5) - -/* - * 4965 power supply voltage compensation for txpower - */ -#define TX_POWER_IL_VOLTAGE_CODES_PER_03V (7) - -/** - * Gain tables. - * - * The following tables contain pair of values for setting txpower, i.e. - * gain settings for the output of the device's digital signal processor (DSP), - * and for the analog gain structure of the transmitter. - * - * Each entry in the gain tables represents a step of 1/2 dB. Note that these - * are *relative* steps, not indications of absolute output power. Output - * power varies with temperature, voltage, and channel frequency, and also - * requires consideration of average power (to satisfy regulatory constraints), - * and peak power (to avoid distortion of the output signal). - * - * Each entry contains two values: - * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained - * linear value that multiplies the output of the digital signal processor, - * before being sent to the analog radio. - * 2) Radio gain. This sets the analog gain of the radio Tx path. - * It is a coarser setting, and behaves in a logarithmic (dB) fashion. - * - * EEPROM contains factory calibration data for txpower. This maps actual - * measured txpower levels to gain settings in the "well known" tables - * below ("well-known" means here that both factory calibration *and* the - * driver work with the same table). - * - * There are separate tables for 2.4 GHz and 5 GHz bands. The 5 GHz table - * has an extension (into negative idxes), in case the driver needs to - * boost power setting for high device temperatures (higher than would be - * present during factory calibration). A 5 Ghz EEPROM idx of "40" - * corresponds to the 49th entry in the table used by the driver. - */ -#define MIN_TX_GAIN_IDX (0) /* highest gain, lowest idx, 2.4 */ -#define MIN_TX_GAIN_IDX_52GHZ_EXT (-9) /* highest gain, lowest idx, 5 */ - -/** - * 2.4 GHz gain table - * - * Index Dsp gain Radio gain - * 0 110 0x3f (highest gain) - * 1 104 0x3f - * 2 98 0x3f - * 3 110 0x3e - * 4 104 0x3e - * 5 98 0x3e - * 6 110 0x3d - * 7 104 0x3d - * 8 98 0x3d - * 9 110 0x3c - * 10 104 0x3c - * 11 98 0x3c - * 12 110 0x3b - * 13 104 0x3b - * 14 98 0x3b - * 15 110 0x3a - * 16 104 0x3a - * 17 98 0x3a - * 18 110 0x39 - * 19 104 0x39 - * 20 98 0x39 - * 21 110 0x38 - * 22 104 0x38 - * 23 98 0x38 - * 24 110 0x37 - * 25 104 0x37 - * 26 98 0x37 - * 27 110 0x36 - * 28 104 0x36 - * 29 98 0x36 - * 30 110 0x35 - * 31 104 0x35 - * 32 98 0x35 - * 33 110 0x34 - * 34 104 0x34 - * 35 98 0x34 - * 36 110 0x33 - * 37 104 0x33 - * 38 98 0x33 - * 39 110 0x32 - * 40 104 0x32 - * 41 98 0x32 - * 42 110 0x31 - * 43 104 0x31 - * 44 98 0x31 - * 45 110 0x30 - * 46 104 0x30 - * 47 98 0x30 - * 48 110 0x6 - * 49 104 0x6 - * 50 98 0x6 - * 51 110 0x5 - * 52 104 0x5 - * 53 98 0x5 - * 54 110 0x4 - * 55 104 0x4 - * 56 98 0x4 - * 57 110 0x3 - * 58 104 0x3 - * 59 98 0x3 - * 60 110 0x2 - * 61 104 0x2 - * 62 98 0x2 - * 63 110 0x1 - * 64 104 0x1 - * 65 98 0x1 - * 66 110 0x0 - * 67 104 0x0 - * 68 98 0x0 - * 69 97 0 - * 70 96 0 - * 71 95 0 - * 72 94 0 - * 73 93 0 - * 74 92 0 - * 75 91 0 - * 76 90 0 - * 77 89 0 - * 78 88 0 - * 79 87 0 - * 80 86 0 - * 81 85 0 - * 82 84 0 - * 83 83 0 - * 84 82 0 - * 85 81 0 - * 86 80 0 - * 87 79 0 - * 88 78 0 - * 89 77 0 - * 90 76 0 - * 91 75 0 - * 92 74 0 - * 93 73 0 - * 94 72 0 - * 95 71 0 - * 96 70 0 - * 97 69 0 - * 98 68 0 - */ - -/** - * 5 GHz gain table - * - * Index Dsp gain Radio gain - * -9 123 0x3F (highest gain) - * -8 117 0x3F - * -7 110 0x3F - * -6 104 0x3F - * -5 98 0x3F - * -4 110 0x3E - * -3 104 0x3E - * -2 98 0x3E - * -1 110 0x3D - * 0 104 0x3D - * 1 98 0x3D - * 2 110 0x3C - * 3 104 0x3C - * 4 98 0x3C - * 5 110 0x3B - * 6 104 0x3B - * 7 98 0x3B - * 8 110 0x3A - * 9 104 0x3A - * 10 98 0x3A - * 11 110 0x39 - * 12 104 0x39 - * 13 98 0x39 - * 14 110 0x38 - * 15 104 0x38 - * 16 98 0x38 - * 17 110 0x37 - * 18 104 0x37 - * 19 98 0x37 - * 20 110 0x36 - * 21 104 0x36 - * 22 98 0x36 - * 23 110 0x35 - * 24 104 0x35 - * 25 98 0x35 - * 26 110 0x34 - * 27 104 0x34 - * 28 98 0x34 - * 29 110 0x33 - * 30 104 0x33 - * 31 98 0x33 - * 32 110 0x32 - * 33 104 0x32 - * 34 98 0x32 - * 35 110 0x31 - * 36 104 0x31 - * 37 98 0x31 - * 38 110 0x30 - * 39 104 0x30 - * 40 98 0x30 - * 41 110 0x25 - * 42 104 0x25 - * 43 98 0x25 - * 44 110 0x24 - * 45 104 0x24 - * 46 98 0x24 - * 47 110 0x23 - * 48 104 0x23 - * 49 98 0x23 - * 50 110 0x22 - * 51 104 0x18 - * 52 98 0x18 - * 53 110 0x17 - * 54 104 0x17 - * 55 98 0x17 - * 56 110 0x16 - * 57 104 0x16 - * 58 98 0x16 - * 59 110 0x15 - * 60 104 0x15 - * 61 98 0x15 - * 62 110 0x14 - * 63 104 0x14 - * 64 98 0x14 - * 65 110 0x13 - * 66 104 0x13 - * 67 98 0x13 - * 68 110 0x12 - * 69 104 0x08 - * 70 98 0x08 - * 71 110 0x07 - * 72 104 0x07 - * 73 98 0x07 - * 74 110 0x06 - * 75 104 0x06 - * 76 98 0x06 - * 77 110 0x05 - * 78 104 0x05 - * 79 98 0x05 - * 80 110 0x04 - * 81 104 0x04 - * 82 98 0x04 - * 83 110 0x03 - * 84 104 0x03 - * 85 98 0x03 - * 86 110 0x02 - * 87 104 0x02 - * 88 98 0x02 - * 89 110 0x01 - * 90 104 0x01 - * 91 98 0x01 - * 92 110 0x00 - * 93 104 0x00 - * 94 98 0x00 - * 95 93 0x00 - * 96 88 0x00 - * 97 83 0x00 - * 98 78 0x00 - */ - - -/** - * Sanity checks and default values for EEPROM regulatory levels. - * If EEPROM values fall outside MIN/MAX range, use default values. - * - * Regulatory limits refer to the maximum average txpower allowed by - * regulatory agencies in the geographies in which the device is meant - * to be operated. These limits are SKU-specific (i.e. geography-specific), - * and channel-specific; each channel has an individual regulatory limit - * listed in the EEPROM. - * - * Units are in half-dBm (i.e. "34" means 17 dBm). - */ -#define IL_TX_POWER_DEFAULT_REGULATORY_24 (34) -#define IL_TX_POWER_DEFAULT_REGULATORY_52 (34) -#define IL_TX_POWER_REGULATORY_MIN (0) -#define IL_TX_POWER_REGULATORY_MAX (34) - -/** - * Sanity checks and default values for EEPROM saturation levels. - * If EEPROM values fall outside MIN/MAX range, use default values. - * - * Saturation is the highest level that the output power amplifier can produce - * without significant clipping distortion. This is a "peak" power level. - * Different types of modulation (i.e. various "rates", and OFDM vs. CCK) - * require differing amounts of backoff, relative to their average power output, - * in order to avoid clipping distortion. - * - * Driver must make sure that it is violating neither the saturation limit, - * nor the regulatory limit, when calculating Tx power settings for various - * rates. - * - * Units are in half-dBm (i.e. "38" means 19 dBm). - */ -#define IL_TX_POWER_DEFAULT_SATURATION_24 (38) -#define IL_TX_POWER_DEFAULT_SATURATION_52 (38) -#define IL_TX_POWER_SATURATION_MIN (20) -#define IL_TX_POWER_SATURATION_MAX (50) - -/** - * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance) - * and thermal Txpower calibration. - * - * When calculating txpower, driver must compensate for current device - * temperature; higher temperature requires higher gain. Driver must calculate - * current temperature (see "4965 temperature calculation"), then compare vs. - * factory calibration temperature in EEPROM; if current temperature is higher - * than factory temperature, driver must *increase* gain by proportions shown - * in table below. If current temperature is lower than factory, driver must - * *decrease* gain. - * - * Different frequency ranges require different compensation, as shown below. - */ -/* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */ -#define CALIB_IL_TX_ATTEN_GR1_FCH 34 -#define CALIB_IL_TX_ATTEN_GR1_LCH 43 - -/* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */ -#define CALIB_IL_TX_ATTEN_GR2_FCH 44 -#define CALIB_IL_TX_ATTEN_GR2_LCH 70 - -/* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */ -#define CALIB_IL_TX_ATTEN_GR3_FCH 71 -#define CALIB_IL_TX_ATTEN_GR3_LCH 124 - -/* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */ -#define CALIB_IL_TX_ATTEN_GR4_FCH 125 -#define CALIB_IL_TX_ATTEN_GR4_LCH 200 - -/* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */ -#define CALIB_IL_TX_ATTEN_GR5_FCH 1 -#define CALIB_IL_TX_ATTEN_GR5_LCH 20 - -enum { - CALIB_CH_GROUP_1 = 0, - CALIB_CH_GROUP_2 = 1, - CALIB_CH_GROUP_3 = 2, - CALIB_CH_GROUP_4 = 3, - CALIB_CH_GROUP_5 = 4, - CALIB_CH_GROUP_MAX -}; - -/********************* END TXPOWER *****************************************/ - - -/** - * Tx/Rx Queues - * - * Most communication between driver and 4965 is via queues of data buffers. - * For example, all commands that the driver issues to device's embedded - * controller (uCode) are via the command queue (one of the Tx queues). All - * uCode command responses/replies/notifications, including Rx frames, are - * conveyed from uCode to driver via the Rx queue. - * - * Most support for these queues, including handshake support, resides in - * structures in host DRAM, shared between the driver and the device. When - * allocating this memory, the driver must make sure that data written by - * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's - * cache memory), so DRAM and cache are consistent, and the device can - * immediately see changes made by the driver. - * - * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via - * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array - * in DRAM containing 256 Transmit Frame Descriptors (TFDs). - */ -#define IL49_NUM_FIFOS 7 -#define IL49_CMD_FIFO_NUM 4 -#define IL49_NUM_QUEUES 16 -#define IL49_NUM_AMPDU_QUEUES 8 - - -/** - * struct il4965_schedq_bc_tbl - * - * Byte Count table - * - * Each Tx queue uses a byte-count table containing 320 entries: - * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that - * duplicate the first 64 entries (to avoid wrap-around within a Tx win; - * max Tx win is 64 TFDs). - * - * When driver sets up a new TFD, it must also enter the total byte count - * of the frame to be transmitted into the corresponding entry in the byte - * count table for the chosen Tx queue. If the TFD idx is 0-63, the driver - * must duplicate the byte count entry in corresponding idx 256-319. - * - * padding puts each byte count table on a 1024-byte boundary; - * 4965 assumes tables are separated by 1024 bytes. - */ -struct il4965_scd_bc_tbl { - __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; - u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)]; -} __packed; - - -#define IL4965_RTC_INST_LOWER_BOUND (0x000000) - -/* RSSI to dBm */ -#define IL4965_RSSI_OFFSET 44 - -/* PCI registers */ -#define PCI_CFG_RETRY_TIMEOUT 0x041 - -/* PCI register values */ -#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01 -#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02 - -#define IL4965_DEFAULT_TX_RETRY 15 - -/* EEPROM */ -#define IL4965_FIRST_AMPDU_QUEUE 10 - - -#endif /* !__il_4965_hw_h__ */ diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.h b/drivers/net/wireless/iwlegacy/iwl-4965.h deleted file mode 100644 index c0bb45b..0000000 --- a/drivers/net/wireless/iwlegacy/iwl-4965.h +++ /dev/null @@ -1,284 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __il_4965_h__ -#define __il_4965_h__ - -#include "iwl-dev.h" - -/* configuration for the _4965 devices */ -extern struct il_cfg il4965_cfg; - -extern struct il_mod_params il4965_mod_params; - -extern struct ieee80211_ops il4965_hw_ops; - -/* tx queue */ -void il4965_free_tfds_in_queue(struct il_priv *il, - int sta_id, int tid, int freed); - -/* RXON */ -void il4965_set_rxon_chain(struct il_priv *il, - struct il_rxon_context *ctx); - -/* uCode */ -int il4965_verify_ucode(struct il_priv *il); - -/* lib */ -void il4965_check_abort_status(struct il_priv *il, - u8 frame_count, u32 status); - -void il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq); -int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq); -int il4965_hw_nic_init(struct il_priv *il); -int il4965_dump_fh(struct il_priv *il, char **buf, bool display); - -/* rx */ -void il4965_rx_queue_restock(struct il_priv *il); -void il4965_rx_replenish(struct il_priv *il); -void il4965_rx_replenish_now(struct il_priv *il); -void il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq); -int il4965_rxq_stop(struct il_priv *il); -int il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band); -void il4965_rx_reply_rx(struct il_priv *il, - struct il_rx_buf *rxb); -void il4965_rx_reply_rx_phy(struct il_priv *il, - struct il_rx_buf *rxb); -void il4965_rx_handle(struct il_priv *il); - -/* tx */ -void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq); -int il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, - struct il_tx_queue *txq, - dma_addr_t addr, u16 len, u8 reset, u8 pad); -int il4965_hw_tx_queue_init(struct il_priv *il, - struct il_tx_queue *txq); -void il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, - struct ieee80211_tx_info *info); -int il4965_tx_skb(struct il_priv *il, struct sk_buff *skb); -int il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid, u16 *ssn); -int il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid); -int il4965_txq_check_empty(struct il_priv *il, - int sta_id, u8 tid, int txq_id); -void il4965_rx_reply_compressed_ba(struct il_priv *il, - struct il_rx_buf *rxb); -int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx); -void il4965_hw_txq_ctx_free(struct il_priv *il); -int il4965_txq_ctx_alloc(struct il_priv *il); -void il4965_txq_ctx_reset(struct il_priv *il); -void il4965_txq_ctx_stop(struct il_priv *il); -void il4965_txq_set_sched(struct il_priv *il, u32 mask); - -/* - * Acquire il->lock before calling this function ! - */ -void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx); -/** - * il4965_tx_queue_set_status - (optionally) start Tx/Cmd queue - * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed - * @scd_retry: (1) Indicates queue will be used in aggregation mode - * - * NOTE: Acquire il->lock before calling this function ! - */ -void il4965_tx_queue_set_status(struct il_priv *il, - struct il_tx_queue *txq, - int tx_fifo_id, int scd_retry); - -static inline u32 il4965_tx_status_to_mac80211(u32 status) -{ - status &= TX_STATUS_MSK; - - switch (status) { - case TX_STATUS_SUCCESS: - case TX_STATUS_DIRECT_DONE: - return IEEE80211_TX_STAT_ACK; - case TX_STATUS_FAIL_DEST_PS: - return IEEE80211_TX_STAT_TX_FILTERED; - default: - return 0; - } -} - -static inline bool il4965_is_tx_success(u32 status) -{ - status &= TX_STATUS_MSK; - return (status == TX_STATUS_SUCCESS || - status == TX_STATUS_DIRECT_DONE); -} - -u8 il4965_toggle_tx_ant(struct il_priv *il, u8 ant_idx, u8 valid); - -/* rx */ -void il4965_rx_missed_beacon_notif(struct il_priv *il, - struct il_rx_buf *rxb); -bool il4965_good_plcp_health(struct il_priv *il, - struct il_rx_pkt *pkt); -void il4965_rx_stats(struct il_priv *il, - struct il_rx_buf *rxb); -void il4965_reply_stats(struct il_priv *il, - struct il_rx_buf *rxb); - -/* scan */ -int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif); - -/* station mgmt */ -int il4965_manage_ibss_station(struct il_priv *il, - struct ieee80211_vif *vif, bool add); - -/* hcmd */ -int il4965_send_beacon_cmd(struct il_priv *il); - -#ifdef CONFIG_IWLEGACY_DEBUG -const char *il4965_get_tx_fail_reason(u32 status); -#else -static inline const char * -il4965_get_tx_fail_reason(u32 status) { return ""; } -#endif - -/* station management */ -int il4965_alloc_bcast_station(struct il_priv *il, - struct il_rxon_context *ctx); -int il4965_add_bssid_station(struct il_priv *il, - struct il_rxon_context *ctx, - const u8 *addr, u8 *sta_id_r); -int il4965_remove_default_wep_key(struct il_priv *il, - struct il_rxon_context *ctx, - struct ieee80211_key_conf *key); -int il4965_set_default_wep_key(struct il_priv *il, - struct il_rxon_context *ctx, - struct ieee80211_key_conf *key); -int il4965_restore_default_wep_keys(struct il_priv *il, - struct il_rxon_context *ctx); -int il4965_set_dynamic_key(struct il_priv *il, - struct il_rxon_context *ctx, - struct ieee80211_key_conf *key, u8 sta_id); -int il4965_remove_dynamic_key(struct il_priv *il, - struct il_rxon_context *ctx, - struct ieee80211_key_conf *key, u8 sta_id); -void il4965_update_tkip_key(struct il_priv *il, - struct il_rxon_context *ctx, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, u32 iv32, u16 *phase1key); -int il4965_sta_tx_modify_enable_tid(struct il_priv *il, - int sta_id, int tid); -int il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, - int tid, u16 ssn); -int il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, - int tid); -void il4965_sta_modify_sleep_tx_count(struct il_priv *il, - int sta_id, int cnt); -int il4965_update_bcast_stations(struct il_priv *il); - -/* rate */ -static inline u32 il4965_ant_idx_to_flags(u8 ant_idx) -{ - return BIT(ant_idx) << RATE_MCS_ANT_POS; -} - -static inline u8 il4965_hw_get_rate(__le32 rate_n_flags) -{ - return le32_to_cpu(rate_n_flags) & 0xFF; -} - -static inline __le32 il4965_hw_set_rate_n_flags(u8 rate, u32 flags) -{ - return cpu_to_le32(flags|(u32)rate); -} - -/* eeprom */ -void il4965_eeprom_get_mac(const struct il_priv *il, u8 *mac); -int il4965_eeprom_acquire_semaphore(struct il_priv *il); -void il4965_eeprom_release_semaphore(struct il_priv *il); -int il4965_eeprom_check_version(struct il_priv *il); - -/* mac80211 handlers (for 4965) */ -void il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -int il4965_mac_start(struct ieee80211_hw *hw); -void il4965_mac_stop(struct ieee80211_hw *hw); -void il4965_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast); -int il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key); -void il4965_mac_update_tkip_key(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, - u32 iv32, u16 *phase1key); -int il4965_mac_ampdu_action(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum ieee80211_ampdu_mlme_action action, - struct ieee80211_sta *sta, u16 tid, u16 *ssn, - u8 buf_size); -int il4965_mac_sta_add(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta); -void il4965_mac_channel_switch(struct ieee80211_hw *hw, - struct ieee80211_channel_switch *ch_switch); - -void il4965_led_enable(struct il_priv *il); - -#endif /* __il_4965_h__ */ diff --git a/drivers/net/wireless/iwlegacy/iwl-commands.h b/drivers/net/wireless/iwlegacy/iwl-commands.h index e6688b1..55822da 100644 --- a/drivers/net/wireless/iwlegacy/iwl-commands.h +++ b/drivers/net/wireless/iwlegacy/iwl-commands.h @@ -347,7 +347,7 @@ struct il3945_power_per_rate { * For MIMO rates, one value may be different from the other, * in order to balance the Tx output between the two transmitters. * - * See more details in doc for TXPOWER in iwl-4965-hw.h. + * See more details in doc for TXPOWER in 4965.h. */ union il4965_tx_power_dual_stream { struct { @@ -1756,7 +1756,7 @@ struct il_compressed_ba_resp { /* * REPLY_TX_PWR_TBL_CMD = 0x97 (command, has simple generic response) * - * See details under "TXPOWER" in iwl-4965-hw.h. + * See details under "TXPOWER" in 4965.h. */ struct il3945_txpowertable_cmd { diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h index 7c86d19..97b2573 100644 --- a/drivers/net/wireless/iwlegacy/iwl-dev.h +++ b/drivers/net/wireless/iwlegacy/iwl-dev.h @@ -26,7 +26,7 @@ /* * Please use this file (iwl-dev.h) for driver implementation definitions. * Please use iwl-commands.h for uCode API definitions. - * Please use iwl-4965-hw.h for hardware-related definitions. + * Please use 4965.h for hardware-related definitions. */ #ifndef __il_dev_h__ @@ -44,7 +44,7 @@ #include "iwl-prph.h" #include "iwl-fh.h" #include "iwl-debug.h" -#include "iwl-4965-hw.h" +#include "4965.h" #include "iwl-3945-hw.h" #include "iwl-led.h" #include "iwl-power.h" diff --git a/drivers/net/wireless/iwlegacy/iwl-eeprom.h b/drivers/net/wireless/iwlegacy/iwl-eeprom.h index eb868c0..61435a5 100644 --- a/drivers/net/wireless/iwlegacy/iwl-eeprom.h +++ b/drivers/net/wireless/iwlegacy/iwl-eeprom.h @@ -154,7 +154,7 @@ extern const u8 il_eeprom_band_1[14]; * 1) Temperature (degrees Celsius) of device when measurement was made. * * 2) Gain table idx used to achieve the target measurement power. - * This refers to the "well-known" gain tables (see iwl-4965-hw.h). + * This refers to the "well-known" gain tables (see 4965.h). * * 3) Actual measured output power, in half-dBm ("34" = 17 dBm). * diff --git a/drivers/net/wireless/iwlegacy/iwl-prph.h b/drivers/net/wireless/iwlegacy/iwl-prph.h index e34d907..b0bf684 100644 --- a/drivers/net/wireless/iwlegacy/iwl-prph.h +++ b/drivers/net/wireless/iwlegacy/iwl-prph.h @@ -255,7 +255,7 @@ * but one DMA channel may take input from several queues. * * Tx DMA FIFOs have dedicated purposes. For 4965, they are used as follows - * (cf. default_queue_to_tx_fifo in iwl-4965.c): + * (cf. default_queue_to_tx_fifo in 4965.c): * * 0 -- EDCA BK (background) frames, lowest priority * 1 -- EDCA BE (best effort) frames, normal priority diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c index 10a0914..e46e588 100644 --- a/drivers/net/wireless/iwlegacy/iwl-tx.c +++ b/drivers/net/wireless/iwlegacy/iwl-tx.c @@ -232,7 +232,7 @@ EXPORT_SYMBOL(il_cmd_queue_free); * reclaiming packets (on 'tx done IRQ), if free space become > high mark, * Tx queue resumed. * - * See more detailed info in iwl-4965-hw.h. + * See more detailed info in 4965.h. ***************************************************/ int il_queue_space(const struct il_queue *q) -- 1.7.1