Return-path: Received: from mms1.broadcom.com ([216.31.210.17]:2336 "EHLO mms1.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751994Ab1KQWcB (ORCPT ); Thu, 17 Nov 2011 17:32:01 -0500 From: "Franky Lin" To: dwmw2@infradead.org cc: linux-wireless@vger.kernel.org, linville@tuxdriver.com Subject: [PATCH 3/3] linux-firmware: remove nvram file for bcm4329 development board Date: Thu, 17 Nov 2011 14:31:41 -0800 Message-ID: <1321569101-19568-4-git-send-email-frankyl@broadcom.com> (sfid-20111117_233223_729306_64BD2002) In-Reply-To: <1321569101-19568-1-git-send-email-frankyl@broadcom.com> References: <1321569101-19568-1-git-send-email-frankyl@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: The nvram file contains configuration info for firmware which varies with different hardware designs. The version currently in the repository is for a Broadcom-internal development board that is not available on the market. This file is not applicable for any exsisting end-user product. Users should use the nvram file that was shipped with their device to avoid unexpected or incorrect behavior. Remove the file from repository to avoid confusion. Signed-off-by: Franky Lin --- brcm/bcm4329-fullmac-4.txt | 94 -------------------------------------------- 1 files changed, 0 insertions(+), 94 deletions(-) delete mode 100644 brcm/bcm4329-fullmac-4.txt diff --git a/brcm/bcm4329-fullmac-4.txt b/brcm/bcm4329-fullmac-4.txt deleted file mode 100644 index f757f55..0000000 --- a/brcm/bcm4329-fullmac-4.txt +++ /dev/null @@ -1,94 +0,0 @@ -# bcm94329sdagb board -# $Copyright (C) 2008 Broadcom Corporation$ -# $id$ - -sromrev=3 -vendid=0x14e4 -devid=0x432e -# board type -boardtype=0x4ff - -# board revision 1.1 -boardrev=0x19 - -# boardflags -boardflags=0x1200 - -####### IMP ######## -# Specify the xtalfreq if it is otherthan 38.4MHz -xtalfreq=38400 - -aa2g=1 -aa5g=1 - -ag0=255 - -# 11g paparams -pa0b0=6003,6003,5112 -pa0b1=64086,64086,64229 -pa0b2=65195,65195,65081 -pa0itssit=62 -pa0maxpwr=66 -opo=0 -mcs2gpo0=0x2222 -mcs2gpo1=0x2222 - -# sel = 1 : 20% evm sel = 2 : 27% evm sel = 3 : 16% evm -cckdigfilttype=0 -ofdmdigfilttype=1 - -# 11a paparams lowband -pa1lob0=5662 -pa1lob1=64130 -pa1lob2=65156 -# paparams midband -pa1b0=5724 -pa1b1=64128 -pa1b2=65167 -#paparams high band -pa1hib0=5675 -pa1hib1=64129 -pa1hib2=65169 -pa1itssit=62 -pa1maxpwr=66 -opo=0 -mcs5gpo=0x22222222 - -# 11g rssi params -rssismf2g=0xa -rssismc2g=0xb -rssisav2g=0x3 -bxa2g=0 - -# 11a rssi params -rssismf5g=0xa -rssismc5g=0xa -rssisav5g=0x3 -bxa2g=0 - -# country code -ccode=X2 -cctl=0x0 - -rxpo2g=1 -rxpo5g=0 -rxpo2gchnflg=0x1FFF - -boardnum=2048 -macaddr=00:90:4c:c5:34:23 - -####### -nocrc=1 - -#for mfgc -otpimagesize=182 - -# sdio extra configs -hwhdr=0x05ffff031030031003100000 - -#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples. -RAW1=80 02 fe ff - -#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS. -#RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A -nvramver=4.218.0.0 -- 1.7.5.4