Return-path: Received: from mms1.broadcom.com ([216.31.210.17]:3748 "EHLO mms1.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751083Ab1KJTau (ORCPT ); Thu, 10 Nov 2011 14:30:50 -0500 From: "Arend van Spriel" To: linville@tuxdriver.com cc: linux-wireless@vger.kernel.org, "Arend van Spriel" Subject: [PATCH 03/19] brcm80211: smac: replace own access category definitions with mac80211 enum Date: Thu, 10 Nov 2011 20:30:18 +0100 Message-ID: <1320953434-16859-5-git-send-email-arend@broadcom.com> (sfid-20111110_203135_107427_9B0C3F79) In-Reply-To: <1320953434-16859-1-git-send-email-arend@broadcom.com> References: <1320953434-16859-1-git-send-email-arend@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: The brcmsmac had own definitions for the access categories. The mac80211 header provides these as well as they are used in the conf_tx callback. As the definitions did not match the driver configured the tx parameters to the wrong queue. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Roland Vossen Reviewed-by: Alwin Beukers Signed-off-by: Arend van Spriel --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 35 ++++++++++++++--------- drivers/net/wireless/brcm80211/brcmsmac/main.h | 8 ++--- 2 files changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index f193fab..0e8873e 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -109,11 +109,6 @@ #define BPHY_PLCP_TIME 192 #define RIFS_11N_TIME 2 -#define AC_BE 0 -#define AC_BK 1 -#define AC_VI 2 -#define AC_VO 3 - /* length of the BCN template area */ #define BCN_TMPL_LEN 512 @@ -305,10 +300,22 @@ uint brcm_msg_level = #endif /* BCMDBG */ /* TX FIFO number to WME/802.1E Access Category */ -static const u8 wme_fifo2ac[] = { AC_BK, AC_BE, AC_VI, AC_VO, AC_BE, AC_BE }; +static const u8 wme_fifo2ac[] = { + IEEE80211_AC_BK, + IEEE80211_AC_BE, + IEEE80211_AC_VI, + IEEE80211_AC_VO, + IEEE80211_AC_BE, + IEEE80211_AC_BE +}; -/* WME/802.1E Access Category to TX FIFO number */ -static const u8 wme_ac2fifo[] = { 1, 0, 2, 3 }; +/* ieee80211 Access Category to TX FIFO number */ +static const u8 wme_ac2fifo[] = { + TX_AC_VO_FIFO, + TX_AC_VI_FIFO, + TX_AC_BE_FIFO, + TX_AC_BK_FIFO +}; /* 802.1D Priority to precedence queue mapping */ const u8 wlc_prio2prec_map[] = { @@ -893,7 +900,7 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs) lfbl, /* Long Frame Rate Fallback Limit */ fbl; - if (queue < AC_COUNT) { + if (queue < IEEE80211_NUM_ACS) { sfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]], EDCF_SFB); lfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]], @@ -4125,7 +4132,7 @@ void brcms_c_wme_setparams(struct brcms_c_info *wlc, u16 aci, EDCF_TXOP2USEC(acp_shm.txop); acp_shm.aifs = (params->aifs & EDCF_AIFSN_MASK); - if (aci == AC_VI && acp_shm.txop == 0 + if (aci == IEEE80211_AC_VI && acp_shm.txop == 0 && acp_shm.aifs < EDCF_AIFSN_MAX) acp_shm.aifs++; @@ -4175,7 +4182,7 @@ static void brcms_c_edcf_setparams(struct brcms_c_info *wlc, bool suspend) }; /* ucode needs these parameters during its initialization */ const struct edcf_acparam *edcf_acp = &default_edcf_acparams[0]; - for (i_ac = 0; i_ac < AC_COUNT; i_ac++, edcf_acp++) { + for (i_ac = 0; i_ac < IEEE80211_NUM_ACS; i_ac++, edcf_acp++) { /* find out which ac this set of params applies to */ aci = (edcf_acp->ACI & EDCF_ACI_MASK) >> EDCF_ACI_SHIFT; @@ -5172,7 +5179,7 @@ static void brcms_c_wme_retries_write(struct brcms_c_info *wlc) if (!wlc->clk) return; - for (ac = 0; ac < AC_COUNT; ac++) + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) brcms_b_write_shm(wlc->hw, M_AC_TXLMT_ADDR(ac), wlc->wme_retries[ac]); } @@ -5647,7 +5654,7 @@ int brcms_c_set_rate_limit(struct brcms_c_info *wlc, u16 srl, u16 lrl) brcms_b_retrylimit_upd(wlc->hw, wlc->SRL, wlc->LRL); - for (ac = 0; ac < AC_COUNT; ac++) { + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_SHORT, wlc->SRL); wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], @@ -8358,7 +8365,7 @@ void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx) /* Uninitialized; read from HW */ int ac; - for (ac = 0; ac < AC_COUNT; ac++) + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) wlc->wme_retries[ac] = brcms_b_read_shm(wlc->hw, M_AC_TXLMT_ADDR(ac)); } diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.h b/drivers/net/wireless/brcm80211/brcmsmac/main.h index 9a7535d..251c350 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.h @@ -44,8 +44,6 @@ /* transmit buffer max headroom for protocol headers */ #define TXOFF (D11_TXH_LEN + D11_PHY_HDR_LEN) -#define AC_COUNT 4 - /* Macros for doing definition and get/set of bitfields * Usage example, e.g. a three-bit field (bits 4-6): * #define _M BITFIELD_MASK(3) @@ -436,7 +434,7 @@ struct brcms_txq_info { * bcn_li_dtim: beacon listen interval in # dtims. * WDarmed: watchdog timer is armed. * WDlast: last time wlc_watchdog() was called. - * edcf_txop[AC_COUNT]: current txop for each ac. + * edcf_txop[IEEE80211_NUM_ACS]: current txop for each ac. * wme_retries: per-AC retry limits. * tx_prec_map: Precedence map based on HW FIFO space. * fifo2prec_map[NFIFO]: pointer to fifo2_prec map based on WME. @@ -535,9 +533,9 @@ struct brcms_c_info { u32 WDlast; /* WME */ - u16 edcf_txop[AC_COUNT]; + u16 edcf_txop[IEEE80211_NUM_ACS]; - u16 wme_retries[AC_COUNT]; + u16 wme_retries[IEEE80211_NUM_ACS]; u16 tx_prec_map; u16 fifo2prec_map[NFIFO]; -- 1.7.5.4