Return-path: Received: from bues.ch ([80.190.117.144]:46149 "EHLO bues.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751942Ab1LISpe (ORCPT ); Fri, 9 Dec 2011 13:45:34 -0500 Date: Fri, 9 Dec 2011 19:45:24 +0100 From: Michael =?UTF-8?B?QsO8c2No?= To: Larry Finger Cc: b43-dev , wireless Subject: Re: RFKILL switch operations with b43 Message-ID: <20111209194524.7f57f936@milhouse> (sfid-20111209_194537_142265_B5E0F60C) In-Reply-To: <4EE25315.9030504@lwfinger.net> References: <4EE25315.9030504@lwfinger.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-wireless-owner@vger.kernel.org List-ID: On Fri, 09 Dec 2011 12:27:33 -0600 Larry Finger wrote: > Does anyone have a laptop with a slide switch (definite on/off positions) and is > using b43? If so, are the "ENABLED" and "DISABLED" messages logged when you move > the switches? What kernel are you using? > > The mini-PCIe slot in my laptop is broken, and I need to use an extender, thus I > cannot do the test myself. If you're not too fat fingered, you can probably modify your extender to add a switch or jumper (or loose wire ;) that pulls pin20 to GND with a resistor or floats it. That should emulate the rfkill input signal to the wireless device. http://pinoutsguide.com/Slots/mini_pcie_pinout.shtml -- Greetings, Michael.