Return-path: Received: from mail-wg0-f44.google.com ([74.125.82.44]:53340 "EHLO mail-wg0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752522Ab2DRTdv convert rfc822-to-8bit (ORCPT ); Wed, 18 Apr 2012 15:33:51 -0400 Received: by wgbdr13 with SMTP id dr13so7854208wgb.1 for ; Wed, 18 Apr 2012 12:33:49 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: <5714877C-2465-4FD5-94A0-9D0806A803C4@gmail.com> References: <2F08FF0B-5C29-4827-AA5F-B0F3847D0B83@gmail.com> <4F8DC25E.9090702@broadcom.com> <4F8E0CBE.6010103@sipsolutions.net> <0FC1AE2B-7E32-466B-AC33-F969F4E72B98@gmail.com> <4B048FDE-C784-4401-9FEC-16F8CC0B8D59@gmail.com> <816C5F70-E340-46F9-8206-2B230A27F3AD@gmail.com> <5714877C-2465-4FD5-94A0-9D0806A803C4@gmail.com> Date: Wed, 18 Apr 2012 22:33:49 +0300 Message-ID: (sfid-20120418_213355_701273_FFDFF50B) Subject: Re: wlan0 not present From: Emmanuel Grumbach To: Dominik Feser Cc: Johannes Berg , Arend van Spriel , linux-wireless@vger.kernel.org, Wey-Yi Guy Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: On Wed, Apr 18, 2012 at 22:28, Dominik Feser wrote: > Thumb question but how do I compile the driver with debug support? I think its missing... > In which file do I have to enable the debug stuff? > > # modprobe iwlwifi debug=0xffffffff > FATAL: Error inserting iwlwifi (/lib/modules/2.6.32.12-0.7.1/updates/drivers/net/wireless/iwlwifi/iwlwifi.ko): Unknown symbol in module, or unknown parameter (see dmesg) > > You need to enable CONFIG_IWLWIFI_DEBUG in your .config file. > > Am 18.04.2012 um 21:25 schrieb Emmanuel Grumbach: > >> On Wed, Apr 18, 2012 at 19:56, Dominik Feser >> wrote: >>> OK, that was the firmware I had tried before. I deleted it because it did not work, too. >>> >>> Here is the output you wanted: >>> # ls /lib/firmware/iwlwifi-6000* >>> /lib/firmware/iwlwifi-6000g2a-5.ucode >>> >>> After copying the firmware there again and rebooting dmesg looks like this: >>> # dmesg | grep iwl >>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>> iwlwifi 0000:02:00.0: ea4b7e1c >>> >>> Still no wlan0 for me... >>> >>> Full dmesg: >>> # dmesg >>> Reserving virtual address space above 0xff400000 >>> Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 >>> KERNEL supported cpus: >>> ?Intel GenuineIntel >>> ?AMD AuthenticAMD >>> ?NSC Geode by NSC >>> ?Cyrix CyrixInstead >>> ?Centaur CentaurHauls >>> ?Transmeta GenuineTMx86 >>> ?Transmeta TransmetaCPU >>> Xen-provided machine memory map: >>> ?BIOS: 0000000000000000 - 000000000009a800 (usable) >>> ?BIOS: 000000000009a800 - 00000000000a0000 (reserved) >>> ?BIOS: 00000000000e0000 - 0000000000100000 (reserved) >>> ?BIOS: 0000000000100000 - 0000000020000000 (usable) >>> ?BIOS: 0000000020000000 - 0000000020200000 (reserved) >>> ?BIOS: 0000000020200000 - 0000000040000000 (usable) >>> ?BIOS: 0000000040000000 - 0000000040200000 (reserved) >>> ?BIOS: 0000000040200000 - 00000000caa25000 (usable) >>> ?BIOS: 00000000caa25000 - 00000000caa69000 (reserved) >>> ?BIOS: 00000000caa69000 - 00000000cadb7000 (usable) >>> ?BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) >>> ?BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) >>> ?BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) >>> ?BIOS: 00000000cafff000 - 00000000cb000000 (usable) >>> ?BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) >>> ?BIOS: 00000000fec00000 - 00000000fec01000 (reserved) >>> ?BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) >>> ?BIOS: 00000000fee00000 - 00000000fee01000 (reserved) >>> ?BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) >>> ?BIOS: 0000000100000000 - 000000022e000000 (usable) >>> Xen-provided physical RAM map: >>> ?Xen: 0000000000000000 - 000000002f800000 (usable) >>> DMI 2.6 present. >>> last_pfn = 0x2f800 max_arch_pfn = 0x10000000 >>> initial memory mapped : 0 - 00000000 >>> init_memory_mapping: 0000000000000000-000000002f800000 >>> NX (Execute Disable) protection: active >>> ?0000000000 - 002f800000 page 4k >>> kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 >>> RAMDISK: 005f9000 - 00d80e00 >>> ACPI: RSDP 000fe300 00024 (v02 DELL ?) >>> ACPI: XSDT caffde18 0007C (v01 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) >>> ACPI: FACP caf87d98 000F4 (v04 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) >>> ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) >>> ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) >>> ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) >>> ACPI: FACS cafe4e40 00040 >>> ACPI: APIC caffcf18 000CC (v02 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) >>> ACPI: TCPA cafe5d18 00032 (v02 ? ? ? ? ? ? ? ? 00000000 ? ? ?00000000) >>> ACPI: SSDT caf88a98 002F9 (v01 DELLTP ? ? ?TPM 00003000 INTL 20090903) >>> ACPI: MCFG cafe5c98 0003C (v01 DELL ? SNDYBRDG 06222004 MSFT 00000097) >>> ACPI: HPET cafe5c18 00038 (v01 A M I ? PCHHPET 06222004 AMI. 00000003) >>> ACPI: BOOT cafe5b98 00028 (v01 DELL ? CBX3 ? ? 06222004 AMI ?00010013) >>> ACPI: SSDT caf6c018 00888 (v01 ?PmRef ?Cpu0Ist 00003000 INTL 20090903) >>> ACPI: SSDT caf6b018 00996 (v01 ?PmRef ? ?CpuPm 00003000 INTL 20090903) >>> ACPI: XMAR caf87c18 000E8 (v01 INTEL ? ? ?SNB ?00000001 INTL 00000001) >>> ACPI: SLIC caf75c18 00176 (v03 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) >>> 0MB HIGHMEM available. >>> 760MB LOWMEM available. >>> ?mapped low ram: 0 - 2f800000 >>> ?low ram: 0 - 2f800000 >>> ?node 0 low ram: 00000000 - 2f000000 >>> ?node 0 bootmap 00000000 - 00005e00 >>> (5 early reservations) ==> bootmem [0000000000 - 002f000000] >>> ?#0 [0000100000 - 00005d8284] ? ?TEXT DATA BSS ==> [0000100000 - 00005d8284] >>> ?#1 [00005f9000 - 0000e4e000] ? ? Xen provided ==> [00005f9000 - 0000e4e000] >>> ?#2 [00005d9000 - 00005d91b3] ? ? ? ? ? ? ?BRK ==> [00005d9000 - 00005d91b3] >>> ?#3 [0000e4e000 - 0000fc4000] ? ? ? ? ?PGTABLE ==> [0000e4e000 - 0000fc4000] >>> ?#4 [0000000000 - 0000006000] ? ? ? ? ?BOOTMAP ==> [0000000000 - 0000006000] >>> found SMP MP-table at [ff3eca70] 000f1a70 >>> Zone PFN ranges: >>> ?DMA ? ? ?0x00000000 -> 0x00001000 >>> ?Normal ? 0x00001000 -> 0x0002f800 >>> ?HighMem ?0x0002f800 -> 0x0002f800 >>> Movable zone start PFN for each node >>> early_node_map[2] active PFN ranges >>> ? ?0: 0x00000000 -> 0x0002f000 >>> ? ?0: 0x0002f800 -> 0x0002f800 >>> On node 0 totalpages: 192512 >>> free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 >>> ?DMA zone: 32 pages used for memmap >>> ?DMA zone: 0 pages reserved >>> ?DMA zone: 4064 pages, LIFO batch:0 >>> ?Normal zone: 1488 pages used for memmap >>> ?Normal zone: 186928 pages, LIFO batch:31 >>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) >>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) >>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) >>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) >>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) >>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) >>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) >>> ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) >>> ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) >>> ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) >>> ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) >>> ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) >>> ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) >>> ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) >>> ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) >>> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>> ACPI: IRQ0 used by override. >>> ACPI: IRQ2 used by override. >>> ACPI: IRQ9 used by override. >>> Using ACPI (MADT) for SMP configuration information >>> Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) >>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 >>> PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 >>> pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 >>> pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 >>> Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) >>> Built 1 zonelists in Zone order, mobility grouping on. ?Total pages: 190992 >>> Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash >>> PID hash table entries: 4096 (order: 2, 16384 bytes) >>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>> Enabling fast FPU save and restore... done. >>> Enabling unmasked SIMD FPU exception support... done. >>> Initializing CPU#0 >>> Software IO TLB enabled: >>> ?Aperture: ? ? 64 megabytes >>> ?Address size: 28 bits >>> ?Kernel range: c17b2000 - c57b2000 >>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>> Initializing HighMem for node 0 (00000000:00000000) >>> Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) >>> virtual kernel memory layout: >>> ? ?fixmap ?: 0xff077000 - 0xff3ff000 ? (3616 kB) >>> ? ?pkmap ? : 0xfec00000 - 0xfee00000 ? (2048 kB) >>> ? ?vmalloc : 0xf0000000 - 0xfebfe000 ? ( 235 MB) >>> ? ?lowmem ?: 0xc0000000 - 0xef800000 ? ( 760 MB) >>> ? ? ?.init : 0xc04f7000 - 0xc0546000 ? ( 316 kB) >>> ? ? ?.data : 0xc0387d67 - 0xc04f66f8 ? (1466 kB) >>> ? ? ?.text : 0xc0100000 - 0xc0387d67 ? (2591 kB) >>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>> Hierarchical RCU implementation. >>> NR_IRQS:2048 >>> Extended CMOS year: 2000 >>> Xen reported: 2793.780 MHz processor. >>> Console: colour dummy device 80x25 >>> console [tty0] enabled >>> console [hvc0] enabled >>> Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) >>> pid_max: default: 32768 minimum: 301 >>> Security Framework initialized >>> Mount-cache hash table entries: 512 >>> mce: CPU supports 7 MCE banks >>> Checking 'hlt' instruction... OK. >>> SMP alternatives: switching to UP code >>> ACPI: Core revision 20090903 >>> SMP alternatives: switching to SMP code >>> Initializing CPU#1 >>> Initializing CPU#2 >>> Brought up 4 CPUs >>> Initializing CPU#3 >>> Grant table version 2 >>> NET: Registered protocol family 16 >>> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >>> ACPI: bus type pci registered >>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>> PCI: Not using MMCONFIG. >>> PCI: Using configuration type 1 for base access >>> bio: create slab at 0 >>> ACPI: EC: Look up EC in DSDT >>> ACPI: BIOS _OSI(Linux) query ignored >>> ACPI: BIOS _OSI(Linux) query ignored >>> ACPI: Interpreter enabled >>> ACPI: (supports S0 S5) >>> ACPI: Using IOAPIC for interrupt routing >>> PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 >>> PCI: MCFG area at f8000000 reserved in ACPI motherboard resources >>> PCI: Using MMCONFIG for extended config space >>> ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 >>> ACPI: No dock devices found. >>> PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug >>> _OSC invalid UUID >>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>> pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] >>> pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] >>> pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] >>> pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] >>> pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:16.0: PME# disabled >>> pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] >>> pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] >>> pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] >>> pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] >>> pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] >>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:19.0: PME# disabled >>> pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] >>> pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1a.0: PME# disabled >>> pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] >>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1b.0: PME# disabled >>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.0: PME# disabled >>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.1: PME# disabled >>> pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.2: PME# disabled >>> pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.3: PME# disabled >>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1c.5: PME# disabled >>> pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] >>> pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >>> pci 0000:00:1d.0: PME# disabled >>> pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] >>> pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] >>> pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] >>> pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] >>> pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] >>> pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] >>> pci 0000:00:1f.2: PME# supported from D3hot >>> pci 0000:00:1f.2: PME# disabled >>> pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] >>> pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] >>> pci 0000:00:1c.0: PCI bridge to [bus 01-01] >>> pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] >>> pci 0000:02:00.0: PME# supported from D0 D3hot D3cold >>> pci 0000:02:00.0: PME# disabled >>> pci 0000:00:1c.1: PCI bridge to [bus 02-02] >>> pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] >>> pci 0000:00:1c.2: PCI bridge to [bus 03-08] >>> pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] >>> pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] >>> pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] >>> pci 0000:00:1c.3: PCI bridge to [bus 09-09] >>> pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] >>> pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] >>> pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] >>> pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] >>> pci 0000:0a:00.0: supports D1 D2 >>> pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold >>> pci 0000:0a:00.0: PME# disabled >>> pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] >>> pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] >>> pci 0000:0a:00.1: supports D1 D2 >>> pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold >>> pci 0000:0a:00.1: PME# disabled >>> pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] >>> pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] >>> pci_bus 0000:00: on NUMA node 0 >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >>> _OSC invalid UUID >>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) >>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) >>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. >>> xen_mem: Initialising balloon driver. >>> vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>> vgaarb: loaded >>> PCI: Using ACPI for IRQ routing >>> Switching to clocksource xen >>> pnp: PnP ACPI init >>> ACPI: bus type pnp registered >>> pnp: PnP ACPI: found 13 devices >>> ACPI: ACPI bus type pnp unregistered >>> system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved >>> system 00:05: ioport range 0x680-0x69f has been reserved >>> system 00:05: ioport range 0x1000-0x100f has been reserved >>> system 00:05: ioport range 0xffff-0xffff has been reserved >>> system 00:05: ioport range 0xffff-0xffff has been reserved >>> system 00:05: ioport range 0x400-0x47f has been reserved >>> system 00:05: ioport range 0x500-0x57f has been reserved >>> system 00:05: ioport range 0x164e-0x164f has been reserved >>> system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved >>> system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved >>> system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved >>> system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved >>> system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved >>> system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved >>> system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved >>> system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved >>> system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved >>> system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved >>> system 00:0c: iomem range 0x20000000-0x201fffff has been reserved >>> system 00:0c: iomem range 0x40000000-0x401fffff has been reserved >>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 >>> pci 0000:00:1c.0: ? IO window: disabled >>> pci 0000:00:1c.0: ? MEM window: disabled >>> pci 0000:00:1c.0: ? PREFETCH window: disabled >>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 >>> pci 0000:00:1c.1: ? IO window: disabled >>> pci 0000:00:1c.1: ? MEM window: 0xe2d00000-0xe2dfffff >>> pci 0000:00:1c.1: ? PREFETCH window: disabled >>> pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 >>> pci 0000:00:1c.2: ? IO window: 0x3000-0x3fff >>> pci 0000:00:1c.2: ? MEM window: 0xe2200000-0xe2bfffff >>> pci 0000:00:1c.2: ? PREFETCH window: 0x000000e0a00000-0x000000e13fffff >>> pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 >>> pci 0000:00:1c.3: ? IO window: 0x2000-0x2fff >>> pci 0000:00:1c.3: ? MEM window: 0xe1800000-0xe21fffff >>> pci 0000:00:1c.3: ? PREFETCH window: 0x000000e0000000-0x000000e09fffff >>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a >>> pci 0000:00:1c.5: ? IO window: disabled >>> pci 0000:00:1c.5: ? MEM window: 0xe2c00000-0xe2cfffff >>> pci 0000:00:1c.5: ? PREFETCH window: disabled >>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>> pci 0000:00:1c.0: setting latency timer to 64 >>> pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>> pci 0000:00:1c.1: setting latency timer to 64 >>> pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> pci 0000:00:1c.2: setting latency timer to 64 >>> pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >>> pci 0000:00:1c.3: setting latency timer to 64 >>> pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>> pci 0000:00:1c.5: setting latency timer to 64 >>> pci_bus 0000:00: resource 0 io: ?[0x00-0xffff] >>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] >>> pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] >>> pci_bus 0000:03: resource 0 io: ?[0x3000-0x3fff] >>> pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] >>> pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] >>> pci_bus 0000:09: resource 0 io: ?[0x2000-0x2fff] >>> pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] >>> pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] >>> pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>> TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >>> TCP: Hash tables configured (established 131072 bind 65536) >>> TCP reno registered >>> NET: Registered protocol family 1 >>> pci 0000:00:02.0: Boot video device >>> Trying to unpack rootfs image as initramfs... >>> Freeing initrd memory: 7711k freed >>> Simple Boot Flag at 0xf3 set to 0x1 >>> MCE: bind virq for DOM0 logging >>> MCE_DOM0_LOG: enter dom0 mce vIRQ handler >>> MCE_DOM0_LOG: No more urgent data >>> MCE_DOM0_LOG: No more nonurgent data >>> VFS: Disk quotas dquot_6.5.2 >>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>> msgmni has been set to 379 >>> alg: No test for stdrng (krng) >>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >>> io scheduler noop registered >>> io scheduler anticipatory registered >>> io scheduler deadline registered >>> io scheduler cfq registered (default) >>> vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k >>> vesafb: mode is 640x480x16, linelength=1280, pages=0 >>> vesafb: scrolling: redraw >>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >>> fb0: VESA VGA frame buffer device >>> floppy0: Unable to grab DMA2 for the floppy driver >>> floppy0: no floppy controllers found >>> brd: module loaded >>> loop: module loaded >>> Xen virtual console successfully installed as hvc0 >>> Event-channel device installed. >>> blktap_device_init: blktap device major 253 >>> blktap_ring_init: blktap ring major: 253 >>> netfront: Initialising virtual ethernet driver. >>> Uniform Multi-Platform E-IDE driver >>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>> i8042.c: Warning: Keylock active. >>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>> serio: i8042 AUX port at 0x60,0x64 irq 12 >>> mice: PS/2 mouse device common for all mice >>> NET: Registered protocol family 17 >>> registered taskstats version 1 >>> input: AT Translated Set 2 keyboard as /class/input/input0 >>> PCI IO multiplexer device installed. >>> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >>> Freeing unused kernel memory: 316k freed >>> Console: switching to colour frame buffer device 80x30 >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>> ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>> ehci_hcd 0000:00:1a.0: setting latency timer to 64 >>> ehci_hcd 0000:00:1a.0: EHCI Host Controller >>> ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >>> ehci_hcd 0000:00:1a.0: debug port 2 >>> ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported >>> ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 >>> ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>> usb usb1: configuration #1 chosen from 1 choice >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 3 ports detected >>> ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> ehci_hcd 0000:00:1d.0: setting latency timer to 64 >>> ehci_hcd 0000:00:1d.0: EHCI Host Controller >>> ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >>> ehci_hcd 0000:00:1d.0: debug port 2 >>> ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported >>> ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 >>> ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>> usb usb2: configuration #1 chosen from 1 choice >>> hub 2-0:1.0: USB hub found >>> hub 2-0:1.0: 3 ports detected >>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>> uhci_hcd: USB Universal Host Controller Interface driver >>> SCSI subsystem initialized >>> libata version 3.00 loaded. >>> ahci 0000:00:1f.2: version 3.0 >>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X >>> ahci: SSS flag set, parallel bus scan disabled >>> ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode >>> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst >>> ahci 0000:00:1f.2: setting latency timer to 64 >>> scsi0 : ahci >>> scsi1 : ahci >>> scsi2 : ahci >>> scsi3 : ahci >>> scsi4 : ahci >>> scsi5 : ahci >>> ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 >>> ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 >>> ata3: DUMMY >>> ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 >>> ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 >>> ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 >>> input: PS/2 Generic Mouse as /class/input/input1 >>> usb 1-1: new high speed USB device using ehci_hcd and address 2 >>> usb 1-1: configuration #1 chosen from 1 choice >>> hub 1-1:1.0: USB hub found >>> hub 1-1:1.0: 6 ports detected >>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >>> usb 2-1: new high speed USB device using ehci_hcd and address 2 >>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>> ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 >>> ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) >>> ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) >>> ata1.00: configured for UDMA/133 >>> scsi 0:0:0:0: Direct-Access ? ? ATA ? ? ?ST9500423AS ? ? ?0002 PQ: 0 ANSI: 5 >>> sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) >>> sd 0:0:0:0: [sda] 4096-byte physical blocks >>> sd 0:0:0:0: [sda] Write Protect is off >>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >>> ?sda: sda1 sda2 sda3 >>> sd 0:0:0:0: [sda] Attached SCSI disk >>> usb 2-1: configuration #1 chosen from 1 choice >>> hub 2-1:1.0: USB hub found >>> hub 2-1:1.0: 8 ports detected >>> usb 1-1.4: new full speed USB device using ehci_hcd and address 3 >>> usb 1-1.4: configuration #1 chosen from 1 choice >>> usb 1-1.5: new high speed USB device using ehci_hcd and address 4 >>> usb 1-1.5: configuration #1 chosen from 1 choice >>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN >>> ata2.00: configured for UDMA/133 >>> scsi 1:0:0:0: CD-ROM ? ? ? ? ? ?HL-DT-ST DVD+-RW GU60N ? ?A102 PQ: 0 ANSI: 5 >>> usb 2-1.8: new full speed USB device using ehci_hcd and address 3 >>> usb 2-1.8: configuration #0 chosen from 1 choice >>> usb 2-1.8: config 0 descriptor?? >>> ata4: SATA link down (SStatus 0 SControl 300) >>> ata5: SATA link down (SStatus 0 SControl 300) >>> ata6: SATA link down (SStatus 0 SControl 300) >>> device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com >>> kjournald starting. ?Commit interval 15 seconds >>> EXT3-fs: mounted filesystem with ordered data mode. >>> input: PC Speaker as /class/input/input2 >>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>> serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>> 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A >>> e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI >>> e1000e: Copyright(c) 1999 - 2010 Intel Corporation. >>> e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>> e1000e 0000:00:19.0: setting latency timer to 64 >>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>> rtc_cmos 00:06: RTC can wake from S4 >>> rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >>> rtc0: alarms up to one year, y3k, 242 bytes nvram >>> parport_pc 00:08: activated >>> parport_pc 00:08: reported by Plug and Play ACPI >>> parport_pc 00:08: disabled >>> e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c >>> e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection >>> e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF >>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] >>> ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >>> ACPI: SSDT cadd7798 00727 (v01 ?PmRef ?Cpu0Cst 00003001 INTL 20090903) >>> ACPI: SSDT cadd8a98 00303 (v01 ?PmRef ? ?ApIst 00003000 INTL 20090903) >>> ACPI: SSDT cadd6d98 00119 (v01 ?PmRef ? ?ApCst 00003000 INTL 20090903) >>> input: Lid Switch as /class/input/input3 >>> ACPI: Lid Switch [LID] >>> input: Power Button as /class/input/input4 >>> ACPI: Power Button [PBTN] >>> input: Sleep Button as /class/input/input5 >>> ACPI: Sleep Button [SBTN] >>> input: Power Button as /class/input/input6 >>> ACPI: Power Button [PWRF] >>> thermal LNXTHERM:01: registered as thermal_zone0 >>> ACPI: Thermal Zone [THM] (25 C) >>> sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray >>> Uniform CD-ROM driver Revision: 3.20 >>> sr 1:0:0:0: Attached scsi CD-ROM sr0 >>> Compat-wireless backport release: compat-wireless-v3.4-rc1-2 >>> Backport based on linux-stable.git v3.4-rc1 >>> cfg80211: Calling CRDA to update world regulatory domain >>> ACPI: AC Adapter [AC] (on-line) >>> sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> sr 1:0:0:0: Attached scsi generic sg1 type 5 >>> ACPI: Battery Slot [BAT0] (battery present) >>> ACPI: Battery Slot [BAT1] (battery absent) >>> ACPI: Battery Slot [BAT2] (battery absent) >>> Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: >>> Copyright(c) 2003-2012 Intel Corporation >>> iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>> iwlwifi 0000:02:00.0: setting latency timer to 64 >>> iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 >>> iwlwifi 0000:02:00.0: pci_resource_base = f2478000 >>> iwlwifi 0000:02:00.0: HW Revision ID = 0x34 >>> iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X >>> acpi device:37: registered as cooling_device8 >>> input: Video Bus as /class/input/input7 >>> ACPI: Video Device [VID] (multi-head: yes ?rom: no ?post: no) >>> Non-volatile memory driver v1.3 >>> lp: driver loaded but no devices found >>> md: Autodetecting RAID arrays. >>> md: Scanned 0 and added 0 devices. >>> md: autorun ... >>> md: ... autorun DONE. >>> EXT3 FS on sda1, internal journal >>> ISO 9660 Extensions: Microsoft Joliet Level 3 >>> ISO 9660 Extensions: RRIP_1991A >>> Adding 524280k swap on /var/swap/swap.001. ?Priority:-1 extents:137 across:637248k >>> Microcode Update Driver: v2.00-xen , Peter Oruba >>> Microcode Update Driver: v2.00-xen removed. >>> ip_tables: (C) 2000-2006 Netfilter Core Team >>> nf_conntrack version 0.5.0 (12157 buckets, 48628 max) >>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>> e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X >>> 802.1Q VLAN Support v1.8 Ben Greear >>> All bugs added by David S. Miller >>> device xenbr0 entered promiscuous mode >>> device eth0 entered promiscuous mode >>> e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX >>> e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO >>> RPC: Registered udp transport module. >>> RPC: Registered tcp transport module. >>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>> warning: `ntpdate' uses 32-bit capabilities (legacy support in use) >>> suspend: event channel 38 >>> kjournald starting. ?Commit interval 15 seconds >>> EXT3 FS on dm-0, internal journal >>> EXT3-fs: mounted filesystem with ordered data mode. >>> iwlwifi 0000:02:00.0: ea4b7e1c >>> iwlwifi 0000:02:00.0: ca253e1c >>> iwlwifi 0000:02:00.0: ca253de8 >>> iwlwifi 0000:02:00.0: PCI INT A disabled >>> >>> >> >> Ok, can you please set all the debug flags. Since nothing happens here >> we shouldn't' see that many debug prints: >> >> modprobe iwlwifi debug=0xffffffff >>