Return-path: Received: from nbd.name ([46.4.11.11]:44679 "EHLO nbd.name" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752335Ab2DOKPw (ORCPT ); Sun, 15 Apr 2012 06:15:52 -0400 From: Felix Fietkau To: linux-wireless@vger.kernel.org Cc: linville@tuxdriver.com, mcgrof@qca.qualcomm.com Subject: [PATCH 5/9] ath9k_hw: fix and clean up PHY activation delay Date: Sun, 15 Apr 2012 12:15:37 +0200 Message-Id: <1334484941-27673-5-git-send-email-nbd@openwrt.org> (sfid-20120415_121559_133362_D2F4696B) In-Reply-To: <1334484941-27673-4-git-send-email-nbd@openwrt.org> References: <1334484941-27673-1-git-send-email-nbd@openwrt.org> <1334484941-27673-2-git-send-email-nbd@openwrt.org> <1334484941-27673-3-git-send-email-nbd@openwrt.org> <1334484941-27673-4-git-send-email-nbd@openwrt.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: The delay calculation is the same for all chips, however some parts of the code missed the extra delay factor for half/quarter. Clean up the code and move the delay calculation to a common place. Signed-off-by: Felix Fietkau --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 17 ++--------------- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 20 ++------------------ drivers/net/wireless/ath/ath9k/hw.c | 16 ++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.h | 2 ++ 4 files changed, 22 insertions(+), 33 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index de30cb3..f554bff 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -618,19 +618,10 @@ static void ar5008_hw_init_bb(struct ath_hw *ah, u32 synthDelay; synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; - if (IS_CHAN_B(chan)) - synthDelay = (4 * synthDelay) / 22; - else - synthDelay /= 10; - - if (IS_CHAN_HALF_RATE(chan)) - synthDelay *= 2; - else if (IS_CHAN_QUARTER_RATE(chan)) - synthDelay *= 4; REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); - udelay(synthDelay + BASE_ACTIVATE_DELAY); + ath9k_hw_synth_delay(ah, chan, synthDelay); } static void ar5008_hw_init_chain_masks(struct ath_hw *ah) @@ -948,12 +939,8 @@ static bool ar5008_hw_rfbus_req(struct ath_hw *ah) static void ar5008_hw_rfbus_done(struct ath_hw *ah) { u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; - if (IS_CHAN_B(ah->curchan)) - synthDelay = (4 * synthDelay) / 22; - else - synthDelay /= 10; - udelay(synthDelay + BASE_ACTIVATE_DELAY); + ath9k_hw_synth_delay(ah, ah->curchan, synthDelay); REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 5bc09a1..00afab5 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -524,22 +524,10 @@ static void ar9003_hw_init_bb(struct ath_hw *ah, * Value is in 100ns increments. */ synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; - if (IS_CHAN_B(chan)) - synthDelay = (4 * synthDelay) / 22; - else - synthDelay /= 10; /* Activate the PHY (includes baseband activate + synthesizer on) */ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); - - /* - * There is an issue if the AP starts the calibration before - * the base band timeout completes. This could result in the - * rx_clear false triggering. As a workaround we add delay an - * extra BASE_ACTIVATE_DELAY usecs to ensure this condition - * does not happen. - */ - udelay(synthDelay + BASE_ACTIVATE_DELAY); + ath9k_hw_synth_delay(ah, chan, synthDelay); } static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) @@ -799,12 +787,8 @@ static bool ar9003_hw_rfbus_req(struct ath_hw *ah) static void ar9003_hw_rfbus_done(struct ath_hw *ah) { u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; - if (IS_CHAN_B(ah->curchan)) - synthDelay = (4 * synthDelay) / 22; - else - synthDelay /= 10; - udelay(synthDelay + BASE_ACTIVATE_DELAY); + ath9k_hw_synth_delay(ah, ah->curchan, synthDelay); REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0); } diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e408aaf..5df42ab 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -142,6 +142,22 @@ bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout) } EXPORT_SYMBOL(ath9k_hw_wait); +void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, + int hw_delay) +{ + if (IS_CHAN_B(chan)) + hw_delay = (4 * hw_delay) / 22; + else + hw_delay /= 10; + + if (IS_CHAN_HALF_RATE(chan)) + hw_delay *= 2; + else if (IS_CHAN_QUARTER_RATE(chan)) + hw_delay *= 4; + + udelay(hw_delay + BASE_ACTIVATE_DELAY); +} + void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, int column, unsigned int *writecnt) { diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 1d4b983..a411646 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -923,6 +923,8 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val); void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna); /* General Operation */ +void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, + int hw_delay); bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout); void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, int column, unsigned int *writecnt); -- 1.7.3.2