Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:10036 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757077Ab2DINd3 (ORCPT ); Mon, 9 Apr 2012 09:33:29 -0400 From: Vasanthakumar Thiagarajan To: CC: , Subject: [PATCH V2 2/2] ath6kl: Configure htcap in fw based on the channel type in AP mode Date: Mon, 9 Apr 2012 19:03:58 +0530 Message-ID: <1333978438-29596-2-git-send-email-vthiagar@qca.qualcomm.com> (sfid-20120409_153333_731850_E22981FB) In-Reply-To: <1333978438-29596-1-git-send-email-vthiagar@qca.qualcomm.com> References: <1333978438-29596-1-git-send-email-vthiagar@qca.qualcomm.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: This patch disables HT in start_ap if the type of the channel on which the AP mode is going to be operating is non-HT. HT is enabled with default ht cap setting if the operating channel is going to be 11n. Signed-off-by: Vasanthakumar Thiagarajan --- V2 - Realign the members of struct ath6kl_htcap to avoid padding (Joe Perches' comment) drivers/net/wireless/ath/ath6kl/cfg80211.c | 77 ++++++++++++++++++++-------- drivers/net/wireless/ath/ath6kl/common.h | 1 + drivers/net/wireless/ath/ath6kl/core.h | 9 +++ drivers/net/wireless/ath/ath6kl/wmi.c | 37 +++++++++++++ drivers/net/wireless/ath/ath6kl/wmi.h | 13 +++++ 5 files changed, 116 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 295ad3c..266f068 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -2424,31 +2424,25 @@ void ath6kl_check_wow_status(struct ath6kl *ar) } #endif -static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev, - struct ieee80211_channel *chan, - enum nl80211_channel_type channel_type) +static int ath6kl_set_htcap(struct ath6kl_vif *vif, enum ieee80211_band band, + bool ht_enable) { - struct ath6kl_vif *vif; - - /* - * 'dev' could be NULL if a channel change is required for the hardware - * device itself, instead of a particular VIF. - * - * FIXME: To be handled properly when monitor mode is supported. - */ - if (!dev) - return -EBUSY; - - vif = netdev_priv(dev); + struct ath6kl_htcap *htcap = &vif->htcap; - if (!ath6kl_cfg80211_ready(vif)) - return -EIO; + if (htcap->ht_enable == ht_enable) + return 0; - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: center_freq=%u hw_value=%u\n", - __func__, chan->center_freq, chan->hw_value); - vif->next_chan = chan->center_freq; + if (ht_enable) { + /* Set default ht capabilities */ + htcap->ht_enable = true; + htcap->cap_info = (band == IEEE80211_BAND_2GHZ) ? + ath6kl_g_htcap : ath6kl_a_htcap; + htcap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K; + } else /* Disable ht */ + memset(htcap, 0, sizeof(*htcap)); - return 0; + return ath6kl_wmi_set_htcap_cmd(vif->ar->wmi, vif->fw_vif_idx, + band, htcap); } static bool ath6kl_is_p2p_ie(const u8 *pos) @@ -2571,6 +2565,35 @@ static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon, return 0; } +static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) +{ + struct ath6kl_vif *vif; + + /* + * 'dev' could be NULL if a channel change is required for the hardware + * device itself, instead of a particular VIF. + * + * FIXME: To be handled properly when monitor mode is supported. + */ + if (!dev) + return -EBUSY; + + vif = netdev_priv(dev); + + if (!ath6kl_cfg80211_ready(vif)) + return -EIO; + + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: center_freq=%u hw_value=%u\n", + __func__, chan->center_freq, chan->hw_value); + vif->next_chan = chan->center_freq; + vif->next_ch_type = channel_type; + vif->next_ch_band = chan->band; + + return 0; +} + static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ap_settings *info) { @@ -2737,6 +2760,10 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, return res; } + if (ath6kl_set_htcap(vif, vif->next_ch_band, + vif->next_ch_type != NL80211_CHAN_NO_HT)) + return -EIO; + res = ath6kl_wmi_ap_profile_commit(ar->wmi, vif->fw_vif_idx, &p); if (res < 0) return res; @@ -2771,6 +2798,13 @@ static int ath6kl_stop_ap(struct wiphy *wiphy, struct net_device *dev) ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx); clear_bit(CONNECTED, &vif->flags); + /* Restore ht setting in firmware */ + if (ath6kl_set_htcap(vif, IEEE80211_BAND_2GHZ, true)) + return -EIO; + + if (ath6kl_set_htcap(vif, IEEE80211_BAND_5GHZ, true)) + return -EIO; + return 0; } @@ -3316,6 +3350,7 @@ struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name, vif->next_mode = nw_type; vif->listen_intvl_t = ATH6KL_DEFAULT_LISTEN_INTVAL; vif->bmiss_time_t = ATH6KL_DEFAULT_BMISS_TIME; + vif->htcap.ht_enable = true; memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN); if (fw_vif_idx != 0) diff --git a/drivers/net/wireless/ath/ath6kl/common.h b/drivers/net/wireless/ath/ath6kl/common.h index 71f5450..98a8861 100644 --- a/drivers/net/wireless/ath/ath6kl/common.h +++ b/drivers/net/wireless/ath/ath6kl/common.h @@ -78,6 +78,7 @@ enum crypto_type { struct htc_endpoint_credit_dist; struct ath6kl; +struct ath6kl_htcap; enum htc_credit_dist_reason; struct ath6kl_htc_credit_info; diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 72e6a94..9d67964 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -477,6 +477,12 @@ struct ath6kl_mc_filter { char hw_addr[ATH6KL_MCAST_FILTER_MAC_ADDR_SIZE]; }; +struct ath6kl_htcap { + bool ht_enable; + u8 ampdu_factor; + unsigned short cap_info; +}; + /* * Driver's maximum limit, note that some firmwares support only one vif * and the runtime (current) limit must be checked from ar->vif_max. @@ -525,6 +531,7 @@ struct ath6kl_vif { struct ath6kl_wep_key wep_key_list[WMI_MAX_KEY_INDEX + 1]; struct ath6kl_key keys[WMI_MAX_KEY_INDEX + 1]; struct aggr_info *aggr_cntxt; + struct ath6kl_htcap htcap; struct timer_list disconnect_timer; struct timer_list sched_scan_timer; @@ -537,6 +544,8 @@ struct ath6kl_vif { u32 send_action_id; bool probe_req_report; u16 next_chan; + enum nl80211_channel_type next_ch_type; + enum ieee80211_band next_ch_band; u16 assoc_bss_beacon_int; u16 listen_intvl_t; u16 bmiss_time_t; diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 7cd1d96..7c8a997 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -2882,6 +2882,43 @@ int ath6kl_wmi_set_keepalive_cmd(struct wmi *wmi, u8 if_idx, return ret; } +int ath6kl_wmi_set_htcap_cmd(struct wmi *wmi, u8 if_idx, + enum ieee80211_band band, + struct ath6kl_htcap *htcap) +{ + struct sk_buff *skb; + struct wmi_set_htcap_cmd *cmd; + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + cmd = (struct wmi_set_htcap_cmd *) skb->data; + + /* + * NOTE: Band in firmware matches enum ieee80211_band, it is unlikely + * this will be changed in firmware. If at all there is any change in + * band value, the host needs to be fixed. + */ + cmd->band = band; + cmd->ht_enable = !!htcap->ht_enable; + cmd->ht20_sgi = !!(htcap->cap_info & IEEE80211_HT_CAP_SGI_20); + cmd->ht40_supported = + !!(htcap->cap_info & IEEE80211_HT_CAP_SUP_WIDTH_20_40); + cmd->ht40_sgi = !!(htcap->cap_info & IEEE80211_HT_CAP_SGI_40); + cmd->intolerant_40mhz = + !!(htcap->cap_info & IEEE80211_HT_CAP_40MHZ_INTOLERANT); + cmd->max_ampdu_len_exp = htcap->ampdu_factor; + + ath6kl_dbg(ATH6KL_DBG_WMI, + "Set htcap: band:%d ht_enable:%d 40mhz:%d sgi_20mhz:%d sgi_40mhz:%d 40mhz_intolerant:%d ampdu_len_exp:%d\n", + cmd->band, cmd->ht_enable, cmd->ht40_supported, + cmd->ht20_sgi, cmd->ht40_sgi, cmd->intolerant_40mhz, + cmd->max_ampdu_len_exp); + return ath6kl_wmi_cmd_send(wmi, if_idx, skb, WMI_SET_HT_CAP_CMDID, + NO_SYNC_WMIFLAG); +} + int ath6kl_wmi_test_cmd(struct wmi *wmi, void *buf, size_t len) { struct sk_buff *skb; diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h index 25aa6b8..d3d2ab5 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.h +++ b/drivers/net/wireless/ath/ath6kl/wmi.h @@ -1277,6 +1277,16 @@ struct wmi_mcast_filter_add_del_cmd { u8 mcast_mac[ATH6KL_MCAST_FILTER_MAC_ADDR_SIZE]; } __packed; +struct wmi_set_htcap_cmd { + u8 band; + u8 ht_enable; + u8 ht40_supported; + u8 ht20_sgi; + u8 ht40_sgi; + u8 intolerant_40mhz; + u8 max_ampdu_len_exp; +} __packed; + /* Command Replies */ /* WMI_GET_CHANNEL_LIST_CMDID reply */ @@ -2487,6 +2497,9 @@ int ath6kl_wmi_get_roam_tbl_cmd(struct wmi *wmi); int ath6kl_wmi_set_wmm_txop(struct wmi *wmi, u8 if_idx, enum wmi_txop_cfg cfg); int ath6kl_wmi_set_keepalive_cmd(struct wmi *wmi, u8 if_idx, u8 keep_alive_intvl); +int ath6kl_wmi_set_htcap_cmd(struct wmi *wmi, u8 if_idx, + enum ieee80211_band band, + struct ath6kl_htcap *htcap); int ath6kl_wmi_test_cmd(struct wmi *wmi, void *buf, size_t len); s32 ath6kl_wmi_get_rate(s8 rate_index); -- 1.7.0.4