Return-path: Received: from mail-wg0-f44.google.com ([74.125.82.44]:52551 "EHLO mail-wg0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754512Ab2DRT0B convert rfc822-to-8bit (ORCPT ); Wed, 18 Apr 2012 15:26:01 -0400 Received: by wgbdr13 with SMTP id dr13so7848169wgb.1 for ; Wed, 18 Apr 2012 12:25:59 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: <816C5F70-E340-46F9-8206-2B230A27F3AD@gmail.com> References: <2F08FF0B-5C29-4827-AA5F-B0F3847D0B83@gmail.com> <4F8DC25E.9090702@broadcom.com> <4F8E0CBE.6010103@sipsolutions.net> <0FC1AE2B-7E32-466B-AC33-F969F4E72B98@gmail.com> <4B048FDE-C784-4401-9FEC-16F8CC0B8D59@gmail.com> <816C5F70-E340-46F9-8206-2B230A27F3AD@gmail.com> Date: Wed, 18 Apr 2012 22:25:58 +0300 Message-ID: (sfid-20120418_212624_220848_A4B50AC9) Subject: Re: wlan0 not present From: Emmanuel Grumbach To: Dominik Feser Cc: Johannes Berg , Arend van Spriel , linux-wireless@vger.kernel.org, Wey-Yi Guy Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: On Wed, Apr 18, 2012 at 19:56, Dominik Feser wrote: > OK, that was the firmware I had tried before. I deleted it because it did not work, too. > > Here is the output you wanted: > # ls /lib/firmware/iwlwifi-6000* > /lib/firmware/iwlwifi-6000g2a-5.ucode > > After copying the firmware there again and rebooting dmesg looks like this: > # dmesg | grep iwl > iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > iwlwifi 0000:02:00.0: setting latency timer to 64 > iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 > iwlwifi 0000:02:00.0: pci_resource_base = f2478000 > iwlwifi 0000:02:00.0: HW Revision ID = 0x34 > iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X > iwlwifi 0000:02:00.0: ea4b7e1c > > Still no wlan0 for me... > > Full dmesg: > # dmesg > Reserving virtual address space above 0xff400000 > Linux version 2.6.32.12-0.7.1 (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #6 SMP Mon Apr 16 19:31:06 EDT 2012 > KERNEL supported cpus: > ?Intel GenuineIntel > ?AMD AuthenticAMD > ?NSC Geode by NSC > ?Cyrix CyrixInstead > ?Centaur CentaurHauls > ?Transmeta GenuineTMx86 > ?Transmeta TransmetaCPU > Xen-provided machine memory map: > ?BIOS: 0000000000000000 - 000000000009a800 (usable) > ?BIOS: 000000000009a800 - 00000000000a0000 (reserved) > ?BIOS: 00000000000e0000 - 0000000000100000 (reserved) > ?BIOS: 0000000000100000 - 0000000020000000 (usable) > ?BIOS: 0000000020000000 - 0000000020200000 (reserved) > ?BIOS: 0000000020200000 - 0000000040000000 (usable) > ?BIOS: 0000000040000000 - 0000000040200000 (reserved) > ?BIOS: 0000000040200000 - 00000000caa25000 (usable) > ?BIOS: 00000000caa25000 - 00000000caa69000 (reserved) > ?BIOS: 00000000caa69000 - 00000000cadb7000 (usable) > ?BIOS: 00000000cadb7000 - 00000000cade7000 (reserved) > ?BIOS: 00000000cade7000 - 00000000cafe7000 (ACPI NVS) > ?BIOS: 00000000cafe7000 - 00000000cafff000 (ACPI data) > ?BIOS: 00000000cafff000 - 00000000cb000000 (usable) > ?BIOS: 00000000cb800000 - 00000000cfa00000 (reserved) > ?BIOS: 00000000fec00000 - 00000000fec01000 (reserved) > ?BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) > ?BIOS: 00000000fee00000 - 00000000fee01000 (reserved) > ?BIOS: 00000000ffc00000 - 00000000ffc20000 (reserved) > ?BIOS: 0000000100000000 - 000000022e000000 (usable) > Xen-provided physical RAM map: > ?Xen: 0000000000000000 - 000000002f800000 (usable) > DMI 2.6 present. > last_pfn = 0x2f800 max_arch_pfn = 0x10000000 > initial memory mapped : 0 - 00000000 > init_memory_mapping: 0000000000000000-000000002f800000 > NX (Execute Disable) protection: active > ?0000000000 - 002f800000 page 4k > kernel direct mapping tables up to 2f800000 @ e4e000-fcf000 > RAMDISK: 005f9000 - 00d80e00 > ACPI: RSDP 000fe300 00024 (v02 DELL ?) > ACPI: XSDT caffde18 0007C (v01 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) > ACPI: FACP caf87d98 000F4 (v04 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) > ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) > ACPI Warning: 32/64X FACS address mismatch in FADT - CAFE4E40/00000000CAFE4D40, using 32 (20090903/tbfadt-486) > ACPI: DSDT caf55018 087F6 (v02 INT430 SYSFexxx 00001001 INTL 20090903) > ACPI: FACS cafe4e40 00040 > ACPI: APIC caffcf18 000CC (v02 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) > ACPI: TCPA cafe5d18 00032 (v02 ? ? ? ? ? ? ? ? 00000000 ? ? ?00000000) > ACPI: SSDT caf88a98 002F9 (v01 DELLTP ? ? ?TPM 00003000 INTL 20090903) > ACPI: MCFG cafe5c98 0003C (v01 DELL ? SNDYBRDG 06222004 MSFT 00000097) > ACPI: HPET cafe5c18 00038 (v01 A M I ? PCHHPET 06222004 AMI. 00000003) > ACPI: BOOT cafe5b98 00028 (v01 DELL ? CBX3 ? ? 06222004 AMI ?00010013) > ACPI: SSDT caf6c018 00888 (v01 ?PmRef ?Cpu0Ist 00003000 INTL 20090903) > ACPI: SSDT caf6b018 00996 (v01 ?PmRef ? ?CpuPm 00003000 INTL 20090903) > ACPI: XMAR caf87c18 000E8 (v01 INTEL ? ? ?SNB ?00000001 INTL 00000001) > ACPI: SLIC caf75c18 00176 (v03 DELL ? ?CBX3 ? ?06222004 MSFT 00010013) > 0MB HIGHMEM available. > 760MB LOWMEM available. > ?mapped low ram: 0 - 2f800000 > ?low ram: 0 - 2f800000 > ?node 0 low ram: 00000000 - 2f000000 > ?node 0 bootmap 00000000 - 00005e00 > (5 early reservations) ==> bootmem [0000000000 - 002f000000] > ?#0 [0000100000 - 00005d8284] ? ?TEXT DATA BSS ==> [0000100000 - 00005d8284] > ?#1 [00005f9000 - 0000e4e000] ? ? Xen provided ==> [00005f9000 - 0000e4e000] > ?#2 [00005d9000 - 00005d91b3] ? ? ? ? ? ? ?BRK ==> [00005d9000 - 00005d91b3] > ?#3 [0000e4e000 - 0000fc4000] ? ? ? ? ?PGTABLE ==> [0000e4e000 - 0000fc4000] > ?#4 [0000000000 - 0000006000] ? ? ? ? ?BOOTMAP ==> [0000000000 - 0000006000] > found SMP MP-table at [ff3eca70] 000f1a70 > Zone PFN ranges: > ?DMA ? ? ?0x00000000 -> 0x00001000 > ?Normal ? 0x00001000 -> 0x0002f800 > ?HighMem ?0x0002f800 -> 0x0002f800 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > ? ?0: 0x00000000 -> 0x0002f000 > ? ?0: 0x0002f800 -> 0x0002f800 > On node 0 totalpages: 192512 > free_area_init_node: node 0, pgdat c04ef300, node_mem_map c1002000 > ?DMA zone: 32 pages used for memmap > ?DMA zone: 0 pages reserved > ?DMA zone: 4064 pages, LIFO batch:0 > ?Normal zone: 1488 pages used for memmap > ?Normal zone: 186928 pages, LIFO batch:31 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) > ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000) > NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 9 pages/cpu @c16b9000 s13720 r0 d23144 u65536 > pcpu-alloc: s13720 r0 d23144 u65536 alloc=16*4096 > pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > Swapping MFNs for PFN 544 and 16bb (MFN c9544 and c9f33) > Built 1 zonelists in Zone order, mobility grouping on. ?Total pages: 190992 > Kernel command line: root=LABEL=root-hwkkxaxy ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash > PID hash table entries: 4096 (order: 2, 16384 bytes) > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > Software IO TLB enabled: > ?Aperture: ? ? 64 megabytes > ?Address size: 28 bits > ?Kernel range: c17b2000 - c57b2000 > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Initializing HighMem for node 0 (00000000:00000000) > Memory: 681820k/778240k available (2591k kernel code, 88012k reserved, 1466k data, 316k init, 0k highmem) > virtual kernel memory layout: > ? ?fixmap ?: 0xff077000 - 0xff3ff000 ? (3616 kB) > ? ?pkmap ? : 0xfec00000 - 0xfee00000 ? (2048 kB) > ? ?vmalloc : 0xf0000000 - 0xfebfe000 ? ( 235 MB) > ? ?lowmem ?: 0xc0000000 - 0xef800000 ? ( 760 MB) > ? ? ?.init : 0xc04f7000 - 0xc0546000 ? ( 316 kB) > ? ? ?.data : 0xc0387d67 - 0xc04f66f8 ? (1466 kB) > ? ? ?.text : 0xc0100000 - 0xc0387d67 ? (2591 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > Hierarchical RCU implementation. > NR_IRQS:2048 > Extended CMOS year: 2000 > Xen reported: 2793.780 MHz processor. > Console: colour dummy device 80x25 > console [tty0] enabled > console [hvc0] enabled > Calibrating delay using timer specific routine.. 5616.72 BogoMIPS (lpj=28083614) > pid_max: default: 32768 minimum: 301 > Security Framework initialized > Mount-cache hash table entries: 512 > mce: CPU supports 7 MCE banks > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > ACPI: Core revision 20090903 > SMP alternatives: switching to SMP code > Initializing CPU#1 > Initializing CPU#2 > Brought up 4 CPUs > Initializing CPU#3 > Grant table version 2 > NET: Registered protocol family 16 > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > ACPI: bus type pci registered > PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 for base access > bio: create slab at 0 > ACPI: EC: Look up EC in DSDT > ACPI: BIOS _OSI(Linux) query ignored > ACPI: BIOS _OSI(Linux) query ignored > ACPI: Interpreter enabled > ACPI: (supports S0 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 > PCI: MCFG area at f8000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG for extended config space > ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 > ACPI: No dock devices found. > PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug > _OSC invalid UUID > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:02.0: reg 10 64bit mmio: [0xe1400000-0xe17fffff] > pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] > pci 0000:00:02.0: reg 20 io port: [0x4000-0x403f] > pci 0000:00:16.0: reg 10 64bit mmio: [0xe2eb0000-0xe2eb000f] > pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > pci 0000:00:16.0: PME# disabled > pci 0000:00:16.3: reg 10 io port: [0x40e0-0x40e7] > pci 0000:00:16.3: reg 14 32bit mmio: [0xe2e90000-0xe2e90fff] > pci 0000:00:19.0: reg 10 32bit mmio: [0xe2e00000-0xe2e1ffff] > pci 0000:00:19.0: reg 14 32bit mmio: [0xe2e80000-0xe2e80fff] > pci 0000:00:19.0: reg 18 io port: [0x4080-0x409f] > pci 0000:00:19.0: PME# supported from D0 D3hot D3cold > pci 0000:00:19.0: PME# disabled > pci 0000:00:1a.0: reg 10 32bit mmio: [0xe2e70000-0xe2e703ff] > pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.0: PME# disabled > pci 0000:00:1b.0: reg 10 64bit mmio: [0xe2e60000-0xe2e63fff] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1b.0: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.3: PME# disabled > pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.5: PME# disabled > pci 0000:00:1d.0: reg 10 32bit mmio: [0xe2e50000-0xe2e503ff] > pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.0: PME# disabled > pci 0000:00:1f.2: reg 10 io port: [0x40d0-0x40d7] > pci 0000:00:1f.2: reg 14 io port: [0x40c0-0x40c3] > pci 0000:00:1f.2: reg 18 io port: [0x40b0-0x40b7] > pci 0000:00:1f.2: reg 1c io port: [0x40a0-0x40a3] > pci 0000:00:1f.2: reg 20 io port: [0x4060-0x407f] > pci 0000:00:1f.2: reg 24 32bit mmio: [0xe2e40000-0xe2e407ff] > pci 0000:00:1f.2: PME# supported from D3hot > pci 0000:00:1f.2: PME# disabled > pci 0000:00:1f.3: reg 10 64bit mmio: [0xe2e30000-0xe2e300ff] > pci 0000:00:1f.3: reg 20 io port: [0x4040-0x405f] > pci 0000:00:1c.0: PCI bridge to [bus 01-01] > pci 0000:02:00.0: reg 10 64bit mmio: [0xe2d00000-0xe2d01fff] > pci 0000:02:00.0: PME# supported from D0 D3hot D3cold > pci 0000:02:00.0: PME# disabled > pci 0000:00:1c.1: PCI bridge to [bus 02-02] > pci 0000:00:1c.1: bridge 32bit mmio: [0xe2d00000-0xe2dfffff] > pci 0000:00:1c.2: PCI bridge to [bus 03-08] > pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff] > pci 0000:00:1c.2: bridge 32bit mmio: [0xe2200000-0xe2bfffff] > pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0a00000-0xe13fffff] > pci 0000:00:1c.3: PCI bridge to [bus 09-09] > pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] > pci 0000:00:1c.3: bridge 32bit mmio: [0xe1800000-0xe21fffff] > pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff] > pci 0000:0a:00.0: reg 10 32bit mmio: [0xe2c20000-0xe2c201ff] > pci 0000:0a:00.0: supports D1 D2 > pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:0a:00.0: PME# disabled > pci 0000:0a:00.1: reg 10 32bit mmio: [0xe2c10000-0xe2c10fff] > pci 0000:0a:00.1: reg 18 32bit mmio: [0xe2c00000-0xe2c007ff] > pci 0000:0a:00.1: supports D1 D2 > pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:0a:00.1: PME# disabled > pci 0000:00:1c.5: PCI bridge to [bus 0a-0a] > pci 0000:00:1c.5: bridge 32bit mmio: [0xe2c00000-0xe2cfffff] > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > _OSC invalid UUID > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. > xen_mem: Initialising balloon driver. > vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > PCI: Using ACPI for IRQ routing > Switching to clocksource xen > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved > system 00:05: ioport range 0x680-0x69f has been reserved > system 00:05: ioport range 0x1000-0x100f has been reserved > system 00:05: ioport range 0xffff-0xffff has been reserved > system 00:05: ioport range 0xffff-0xffff has been reserved > system 00:05: ioport range 0x400-0x47f has been reserved > system 00:05: ioport range 0x500-0x57f has been reserved > system 00:05: ioport range 0x164e-0x164f has been reserved > system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved > system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved > system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved > system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved > system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved > system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved > system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved > system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved > system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved > system 00:0c: iomem range 0x20000000-0x201fffff has been reserved > system 00:0c: iomem range 0x40000000-0x401fffff has been reserved > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:1c.0: ? IO window: disabled > pci 0000:00:1c.0: ? MEM window: disabled > pci 0000:00:1c.0: ? PREFETCH window: disabled > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.1: ? IO window: disabled > pci 0000:00:1c.1: ? MEM window: 0xe2d00000-0xe2dfffff > pci 0000:00:1c.1: ? PREFETCH window: disabled > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 > pci 0000:00:1c.2: ? IO window: 0x3000-0x3fff > pci 0000:00:1c.2: ? MEM window: 0xe2200000-0xe2bfffff > pci 0000:00:1c.2: ? PREFETCH window: 0x000000e0a00000-0x000000e13fffff > pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 > pci 0000:00:1c.3: ? IO window: 0x2000-0x2fff > pci 0000:00:1c.3: ? MEM window: 0xe1800000-0xe21fffff > pci 0000:00:1c.3: ? PREFETCH window: 0x000000e0000000-0x000000e09fffff > pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0a > pci 0000:00:1c.5: ? IO window: disabled > pci 0000:00:1c.5: ? MEM window: 0xe2c00000-0xe2cfffff > pci 0000:00:1c.5: ? PREFETCH window: disabled > pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > pci 0000:00:1c.3: setting latency timer to 64 > pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.5: setting latency timer to 64 > pci_bus 0000:00: resource 0 io: ?[0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] > pci_bus 0000:02: resource 1 mem: [0xe2d00000-0xe2dfffff] > pci_bus 0000:03: resource 0 io: ?[0x3000-0x3fff] > pci_bus 0000:03: resource 1 mem: [0xe2200000-0xe2bfffff] > pci_bus 0000:03: resource 2 pref mem [0xe0a00000-0xe13fffff] > pci_bus 0000:09: resource 0 io: ?[0x2000-0x2fff] > pci_bus 0000:09: resource 1 mem: [0xe1800000-0xe21fffff] > pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xe09fffff] > pci_bus 0000:0a: resource 1 mem: [0xe2c00000-0xe2cfffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > pci 0000:00:02.0: Boot video device > Trying to unpack rootfs image as initramfs... > Freeing initrd memory: 7711k freed > Simple Boot Flag at 0xf3 set to 0x1 > MCE: bind virq for DOM0 logging > MCE_DOM0_LOG: enter dom0 mce vIRQ handler > MCE_DOM0_LOG: No more urgent data > MCE_DOM0_LOG: No more nonurgent data > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > msgmni has been set to 379 > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 65472k > vesafb: mode is 640x480x16, linelength=1280, pages=0 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > fb0: VESA VGA frame buffer device > floppy0: Unable to grab DMA2 for the floppy driver > floppy0: no floppy controllers found > brd: module loaded > loop: module loaded > Xen virtual console successfully installed as hvc0 > Event-channel device installed. > blktap_device_init: blktap device major 253 > blktap_ring_init: blktap ring major: 253 > netfront: Initialising virtual ethernet driver. > Uniform Multi-Platform E-IDE driver > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Warning: Keylock active. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > NET: Registered protocol family 17 > registered taskstats version 1 > input: AT Translated Set 2 keyboard as /class/input/input0 > PCI IO multiplexer device installed. > BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > Freeing unused kernel memory: 316k freed > Console: switching to colour frame buffer device 80x30 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > ehci_hcd 0000:00:1a.0: setting latency timer to 64 > ehci_hcd 0000:00:1a.0: EHCI Host Controller > ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.0: debug port 2 > ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported > ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000 > ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > ehci_hcd 0000:00:1d.0: setting latency timer to 64 > ehci_hcd 0000:00:1d.0: EHCI Host Controller > ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.0: debug port 2 > ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000 > ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > SCSI subsystem initialized > libata version 3.00 loaded. > ahci 0000:00:1f.2: version 3.0 > ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ahci 0000:00:1f.2: irq 1279 (279) for MSI/MSI-X > ahci: SSS flag set, parallel bus scan disabled > ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst > ahci 0000:00:1f.2: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 1279 > ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 1279 > ata3: DUMMY > ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 1279 > ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 1279 > ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 1279 > input: PS/2 Generic Mouse as /class/input/input1 > usb 1-1: new high speed USB device using ehci_hcd and address 2 > usb 1-1: configuration #1 chosen from 1 choice > hub 1-1:1.0: USB hub found > hub 1-1:1.0: 6 ports detected > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > usb 2-1: new high speed USB device using ehci_hcd and address 2 > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > ata1.00: ATA-8: ST9500423AS, 0002DEM1, max UDMA/133 > ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > ata1.00: configured for UDMA/133 > scsi 0:0:0:0: Direct-Access ? ? ATA ? ? ?ST9500423AS ? ? ?0002 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) > sd 0:0:0:0: [sda] 4096-byte physical blocks > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > ?sda: sda1 sda2 sda3 > sd 0:0:0:0: [sda] Attached SCSI disk > usb 2-1: configuration #1 chosen from 1 choice > hub 2-1:1.0: USB hub found > hub 2-1:1.0: 8 ports detected > usb 1-1.4: new full speed USB device using ehci_hcd and address 3 > usb 1-1.4: configuration #1 chosen from 1 choice > usb 1-1.5: new high speed USB device using ehci_hcd and address 4 > usb 1-1.5: configuration #1 chosen from 1 choice > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A102, max UDMA/133, ATAPI AN > ata2.00: configured for UDMA/133 > scsi 1:0:0:0: CD-ROM ? ? ? ? ? ?HL-DT-ST DVD+-RW GU60N ? ?A102 PQ: 0 ANSI: 5 > usb 2-1.8: new full speed USB device using ehci_hcd and address 3 > usb 2-1.8: configuration #0 chosen from 1 choice > usb 2-1.8: config 0 descriptor?? > ata4: SATA link down (SStatus 0 SControl 300) > ata5: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com > kjournald starting. ?Commit interval 15 seconds > EXT3-fs: mounted filesystem with ordered data mode. > input: PC Speaker as /class/input/input2 > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > 0000:00:16.3: ttyS0 at I/O 0x40e0 (irq = 17) is a 16550A > e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI > e1000e: Copyright(c) 1999 - 2010 Intel Corporation. > e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > e1000e 0000:00:19.0: setting latency timer to 64 > e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X > rtc_cmos 00:06: RTC can wake from S4 > rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, y3k, 242 bytes nvram > parport_pc 00:08: activated > parport_pc 00:08: reported by Plug and Play ACPI > parport_pc 00:08: disabled > e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:be:d9:0f:d0:6c > e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection > e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 11, PBA No: 3041FF-0FF > i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ACPI: I/O resource 0000:00:1f.3 [0x4040-0x405f] conflicts with ACPI region SMBI [0x4040-0x404f] > ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver > ACPI: SSDT cadd7798 00727 (v01 ?PmRef ?Cpu0Cst 00003001 INTL 20090903) > ACPI: SSDT cadd8a98 00303 (v01 ?PmRef ? ?ApIst 00003000 INTL 20090903) > ACPI: SSDT cadd6d98 00119 (v01 ?PmRef ? ?ApCst 00003000 INTL 20090903) > input: Lid Switch as /class/input/input3 > ACPI: Lid Switch [LID] > input: Power Button as /class/input/input4 > ACPI: Power Button [PBTN] > input: Sleep Button as /class/input/input5 > ACPI: Sleep Button [SBTN] > input: Power Button as /class/input/input6 > ACPI: Power Button [PWRF] > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THM] (25 C) > sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > Compat-wireless backport release: compat-wireless-v3.4-rc1-2 > Backport based on linux-stable.git v3.4-rc1 > cfg80211: Calling CRDA to update world regulatory domain > ACPI: AC Adapter [AC] (on-line) > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sr 1:0:0:0: Attached scsi generic sg1 type 5 > ACPI: Battery Slot [BAT0] (battery present) > ACPI: Battery Slot [BAT1] (battery absent) > ACPI: Battery Slot [BAT2] (battery absent) > Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: > Copyright(c) 2003-2012 Intel Corporation > iwlwifi 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > iwlwifi 0000:02:00.0: setting latency timer to 64 > iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 > iwlwifi 0000:02:00.0: pci_resource_base = f2478000 > iwlwifi 0000:02:00.0: HW Revision ID = 0x34 > iwlwifi 0000:02:00.0: irq 1277 (277) for MSI/MSI-X > acpi device:37: registered as cooling_device8 > input: Video Bus as /class/input/input7 > ACPI: Video Device [VID] (multi-head: yes ?rom: no ?post: no) > Non-volatile memory driver v1.3 > lp: driver loaded but no devices found > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > EXT3 FS on sda1, internal journal > ISO 9660 Extensions: Microsoft Joliet Level 3 > ISO 9660 Extensions: RRIP_1991A > Adding 524280k swap on /var/swap/swap.001. ?Priority:-1 extents:137 across:637248k > Microcode Update Driver: v2.00-xen , Peter Oruba > Microcode Update Driver: v2.00-xen removed. > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (12157 buckets, 48628 max) > e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X > e1000e 0000:00:19.0: irq 1278 (278) for MSI/MSI-X > 802.1Q VLAN Support v1.8 Ben Greear > All bugs added by David S. Miller > device xenbr0 entered promiscuous mode > device eth0 entered promiscuous mode > e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX > e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > warning: `ntpdate' uses 32-bit capabilities (legacy support in use) > suspend: event channel 38 > kjournald starting. ?Commit interval 15 seconds > EXT3 FS on dm-0, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > iwlwifi 0000:02:00.0: ea4b7e1c > iwlwifi 0000:02:00.0: ca253e1c > iwlwifi 0000:02:00.0: ca253de8 > iwlwifi 0000:02:00.0: PCI INT A disabled > > Ok, can you please set all the debug flags. Since nothing happens here we shouldn't' see that many debug prints: modprobe iwlwifi debug=0xffffffff thanks