Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:44665 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751289Ab2DYHIT (ORCPT ); Wed, 25 Apr 2012 03:08:19 -0400 From: Vasanthakumar Thiagarajan To: CC: , Subject: [PATCH] ath6kl: Fix bss filter setting while scanning Date: Wed, 25 Apr 2012 12:39:06 +0530 Message-ID: <1335337746-7294-1-git-send-email-vthiagar@qca.qualcomm.com> (sfid-20120425_090822_115131_C36EA52C) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: bss filter is configured to allow the frames from all the bss other than the currenly connected one, this is done when a scan is requested in connected state. There is no reason to filter out the currently connected bss, configure the filter to allow all the bss. This would fix the reporting of stale rssi of the current bss while scanning. Reported-by: Naveen singh Signed-off-by: Vasanthakumar Thiagarajan --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index d417213..dd5e79a 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -925,10 +925,8 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev, if (!ar->usr_bss_filter) { clear_bit(CLEAR_BSSFILTER_ON_BEACON, &vif->flags); - ret = ath6kl_wmi_bssfilter_cmd( - ar->wmi, vif->fw_vif_idx, - (test_bit(CONNECTED, &vif->flags) ? - ALL_BUT_BSS_FILTER : ALL_BSS_FILTER), 0); + ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx, + ALL_BSS_FILTER, 0); if (ret) { ath6kl_err("couldn't set bss filtering\n"); return ret; -- 1.7.0.4