Return-path: Received: from nbd.name ([46.4.11.11]:36304 "EHLO nbd.name" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753281Ab2EZS15 (ORCPT ); Sat, 26 May 2012 14:27:57 -0400 Message-ID: <4FC120A3.3020307@openwrt.org> (sfid-20120526_202800_666716_4C54719B) Date: Sat, 26 May 2012 20:27:47 +0200 From: Felix Fietkau MIME-Version: 1.0 To: Joe Semler CC: Sujith Manoharan , "ath9k-devel@lists.ath9k.org" , "linux-wireless@vger.kernel.org" Subject: Re: [ath9k-devel] Anyone doing WiFi throughput tests? References: <4FC04B5A.1070900@candelatech.com> <20416.19680.571601.549629@gargle.gargle.HOWL> <7759D07D-C2C8-48D8-8F44-687C7E85D188@gmail.com> <20416.35246.76971.129331@gargle.gargle.HOWL> <4FC0CE2B.9060005@openwrt.org> <9532BE30-26F1-42CF-9300-C25585B29300@gmail.com> In-Reply-To: <9532BE30-26F1-42CF-9300-C25585B29300@gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: On 2012-05-26 7:15 PM, Joe Semler wrote: > Hi Felix, > > > Am 26.05.2012 um 14:35 schrieb Felix Fietkau : > >>> >>> >>> OK, tnx Sujith, but that brings me to my next question acc. 2x2 or 3x3 >>> on OpenWRT-based devices like NanoStation M or AirBridge M. >>> Up to now only 1x2 or 1x3 was possible on this devices. Do we have >>> changings there too? >> Why do you think that only 1x2 or 1x3 was possible on these devices? 2x2 >> and 3x3 has been working just fine for a long time now, and it's enabled >> by default where supported by the hardware > Pickend this Info from The List that devices with openwrt are just > transmitting at 1 stream but rec. at both. How can I change the > settings? Also with uci or only with the iw-commands? You don't need to change anything, just use the defaults. I have no idea what post from the list you're referring to, but here's a piece of advice: It's not unheard of that sometimes people put wrong things on the internet :) - Felix