Return-path: Received: from mail-wg0-f44.google.com ([74.125.82.44]:40505 "EHLO mail-wg0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757962Ab2EJJPd (ORCPT ); Thu, 10 May 2012 05:15:33 -0400 Received: by mail-wg0-f44.google.com with SMTP id dr13so1111470wgb.1 for ; Thu, 10 May 2012 02:15:33 -0700 (PDT) From: Arik Nemtsov To: Cc: Luciano Coelho , Arik Nemtsov Subject: [PATCH 29/78] wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config Date: Thu, 10 May 2012 12:13:34 +0300 Message-Id: <1336641263-5761-30-git-send-email-arik@wizery.com> (sfid-20120510_112347_795300_DF0B50E1) In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com> References: <1336641263-5761-1-git-send-email-arik@wizery.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Add a HW op to add extra enabled rates for AP-mode data-rates. Since the rates might depend on channel properties, reconfigure AP-mode rates when these change. Implement the HW op for the 18xx family, where MIMO or wide-chan rates can be added. Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl12xx/main.c | 1 + drivers/net/wireless/ti/wl18xx/main.c | 14 ++++++++++++++ drivers/net/wireless/ti/wlcore/hw_ops.h | 10 ++++++++++ drivers/net/wireless/ti/wlcore/init.c | 3 +++ drivers/net/wireless/ti/wlcore/main.c | 7 ++++++- drivers/net/wireless/ti/wlcore/wlcore.h | 2 ++ 6 files changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index a333653..ad760a3 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1315,6 +1315,7 @@ static struct wlcore_ops wl12xx_ops = { .get_mac = wl12xx_get_mac, .set_tx_desc_csum = wl12xx_set_tx_desc_csum, .set_rx_csum = NULL, + .ap_get_mimo_wide_rate_mask = NULL, }; static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 77840dd..9da94e6 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -879,6 +879,19 @@ static u32 wl18xx_sta_get_ap_rate_mask(struct wl1271 *wl, return hw_rate_set; } +static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); + return CONF_TX_RATE_USE_WIDE_CHAN; + } else { + wl1271_debug(DEBUG_ACX, "using MIMO rate mask"); + return CONF_TX_MIMO_RATES; + } +} + static void wl18xx_conf_init(struct wl1271 *wl) { struct wl18xx_priv *priv = wl->priv; @@ -906,6 +919,7 @@ static struct wlcore_ops wl18xx_ops = { .set_tx_desc_csum = wl18xx_set_tx_desc_csum, .set_rx_csum = wl18xx_set_rx_csum, .sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask, + .ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask, }; int __devinit wl18xx_probe(struct platform_device *pdev) diff --git a/drivers/net/wireless/ti/wlcore/hw_ops.h b/drivers/net/wireless/ti/wlcore/hw_ops.h index 80f3d75..6d3e378 100644 --- a/drivers/net/wireless/ti/wlcore/hw_ops.h +++ b/drivers/net/wireless/ti/wlcore/hw_ops.h @@ -139,4 +139,14 @@ wlcore_hw_set_rx_csum(struct wl1271 *wl, wl->ops->set_rx_csum(wl, desc, skb); } +static inline u32 +wlcore_hw_ap_get_mimo_wide_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + if (wl->ops->ap_get_mimo_wide_rate_mask) + return wl->ops->ap_get_mimo_wide_rate_mask(wl, wlvif); + + return 0; +} + #endif diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index 9f89255..645abd4 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -460,6 +460,9 @@ int wl1271_init_ap_rates(struct wl1271 *wl, struct wl12xx_vif *wlvif) /* unconditionally enable HT rates */ supported_rates |= CONF_TX_MCS_RATES; + /* get extra MIMO or wide-chan rates where the HW supports it */ + supported_rates |= wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif); + /* configure unicast TX rate classes */ for (i = 0; i < wl->conf.tx.ac_conf_count; i++) { rc.enabled_rates = supported_rates; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index f64aeb9..c98958f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2478,7 +2478,12 @@ static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif, wlvif->channel = channel; wlvif->channel_type = conf->channel_type; - if (!is_ap) { + if (is_ap) { + ret = wl1271_init_ap_rates(wl, wlvif); + if (ret < 0) + wl1271_error("AP rate policy change failed %d", + ret); + } else { /* * FIXME: the mac80211 should really provide a fixed * rate to use here. for now, just use the smallest diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 83c43c9..f9ec84d 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -68,6 +68,8 @@ struct wlcore_ops { void (*set_rx_csum)(struct wl1271 *wl, struct wl1271_rx_descriptor *desc, struct sk_buff *skb); + u32 (*ap_get_mimo_wide_rate_mask)(struct wl1271 *wl, + struct wl12xx_vif *wlvif); }; enum wlcore_partitions { -- 1.7.9.5