Return-path: Received: from mail-wg0-f44.google.com ([74.125.82.44]:61669 "EHLO mail-wg0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757902Ab2EJJOr (ORCPT ); Thu, 10 May 2012 05:14:47 -0400 Received: by mail-wg0-f44.google.com with SMTP id dr13so1110716wgb.1 for ; Thu, 10 May 2012 02:14:46 -0700 (PDT) From: Arik Nemtsov To: Cc: Luciano Coelho , Arik Nemtsov Subject: [PATCH 07/78] wl18xx: add some boot operations and hw-specific configurations Date: Thu, 10 May 2012 12:13:12 +0300 Message-Id: <1336641263-5761-8-git-send-email-arik@wizery.com> (sfid-20120510_111451_631779_4FF1A31C) In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com> References: <1336641263-5761-1-git-send-email-arik@wizery.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Luciano Coelho Implement the boot operation. Add a wl18xx-specific configuration structure (namely to configure the mac and phy parameters). The default hw configuration matches the DVP board. Signed-off-by: Luciano Coelho Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl18xx/conf.h | 57 +++++++++++ drivers/net/wireless/ti/wl18xx/main.c | 180 ++++++++++++++++++++++++++++++++- drivers/net/wireless/ti/wl18xx/reg.h | 75 ++++++++++++++ 3 files changed, 311 insertions(+), 1 deletion(-) create mode 100644 drivers/net/wireless/ti/wl18xx/conf.h diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h new file mode 100644 index 0000000..7cd7bf1 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -0,0 +1,57 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL18XX_CONF_H__ +#define __WL18XX_CONF_H__ + +struct wl18xx_conf_phy { + u8 phy_standalone; + u8 rdl; + u8 enable_clpc; + u8 enable_tx_low_pwr_on_siso_rdl; + u8 auto_detect; + u8 dedicated_fem; + u8 low_band_component; + u8 low_band_component_type; + u8 high_band_component; + u8 high_band_component_type; + u8 number_of_assembled_ant2_4; + u8 number_of_assembled_ant5; + u8 external_pa_dc2dc; + u8 tcxo_ldo_voltage; + u8 xtal_itrim_val; + u8 srf_state; + u8 io_configuration; + u8 sdio_configuration; + u8 settings; + u8 rx_profile; + u8 primary_clock_setting_time; + u8 clock_valid_on_wake_up; + u8 secondary_clock_setting_time; +}; + +struct wl18xx_conf { + /* TODO: move the wlcore conf here? */ + + struct wl18xx_conf_phy phy; +}; + +#endif /* __WL18XX_CONF_H__ */ diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index e517afd..12632d0 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -24,8 +24,40 @@ #include "../wlcore/wlcore.h" #include "../wlcore/debug.h" +#include "../wlcore/io.h" +#include "../wlcore/acx.h" +#include "../wlcore/boot.h" #include "reg.h" +#include "conf.h" + +static struct wl18xx_conf wl18xx_default_conf = { + .phy = { + .phy_standalone = 0x00, + .primary_clock_setting_time = 0x05, + .clock_valid_on_wake_up = 0x00, + .secondary_clock_setting_time = 0x05, + .rdl = 0x01, + .auto_detect = 0x00, + .dedicated_fem = FEM_NONE, + .low_band_component = COMPONENT_2_WAY_SWITCH, + .low_band_component_type = 0x05, + .high_band_component = COMPONENT_2_WAY_SWITCH, + .high_band_component_type = 0x09, + .number_of_assembled_ant2_4 = 0x01, + .number_of_assembled_ant5 = 0x01, + .external_pa_dc2dc = 0x00, + .tcxo_ldo_voltage = 0x00, + .xtal_itrim_val = 0x04, + .srf_state = 0x00, + .io_configuration = 0x01, + .sdio_configuration = 0x00, + .settings = 0x00, + .enable_clpc = 0x00, + .enable_tx_low_pwr_on_siso_rdl = 0x00, + .rx_profile = 0x00, + }, +}; static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = { [PART_TOP_PRCM_ELP_SOC] = { @@ -107,8 +139,154 @@ out: return ret; } +static void wl18xx_set_clk(struct wl1271 *wl) +{ + /* + * TODO: this is hardcoded just for DVP/EVB, fix according to + * new unified_drv. + */ + wl1271_write32(wl, WL18XX_SCR_PAD2, 0xB3); + + wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); + wl1271_write32(wl, 0x00A02360, 0xD0078); + wl1271_write32(wl, 0x00A0236c, 0x12); + wl1271_write32(wl, 0x00A02390, 0x20118); +} + +static void wl18xx_boot_soft_reset(struct wl1271 *wl) +{ + /* disable Rx/Tx */ + wl1271_write32(wl, WL18XX_ENABLE, 0x0); + + /* disable auto calibration on start*/ + wl1271_write32(wl, WL18XX_SPARE_A2, 0xffff); +} + +static int wl18xx_pre_boot(struct wl1271 *wl) +{ + /* TODO: add hw_pg_ver reading */ + + wl18xx_set_clk(wl); + + /* Continue the ELP wake up sequence */ + wl1271_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); + udelay(500); + + wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + + /* Disable interrupts */ + wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); + + wl18xx_boot_soft_reset(wl); + + return 0; +} + +static void wl18xx_pre_upload(struct wl1271 *wl) +{ + u32 tmp; + + wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); + + /* TODO: check if this is all needed */ + wl1271_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND); + + tmp = wlcore_read_reg(wl, REG_CHIP_ID_B); + + wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); + + tmp = wl1271_read32(wl, WL18XX_SCR_PAD2); +} + +static void wl18xx_set_mac_and_phy(struct wl1271 *wl) +{ + struct wl18xx_mac_and_phy_params params; + + memset(¶ms, 0, sizeof(params)); + + params.phy_standalone = wl18xx_default_conf.phy.phy_standalone; + params.rdl = wl18xx_default_conf.phy.rdl; + params.enable_clpc = wl18xx_default_conf.phy.enable_clpc; + params.enable_tx_low_pwr_on_siso_rdl = + wl18xx_default_conf.phy.enable_tx_low_pwr_on_siso_rdl; + params.auto_detect = wl18xx_default_conf.phy.auto_detect; + params.dedicated_fem = wl18xx_default_conf.phy.dedicated_fem; + params.low_band_component = wl18xx_default_conf.phy.low_band_component; + params.low_band_component_type = + wl18xx_default_conf.phy.low_band_component_type; + params.high_band_component = + wl18xx_default_conf.phy.high_band_component; + params.high_band_component_type = + wl18xx_default_conf.phy.high_band_component_type; + params.number_of_assembled_ant2_4 = + wl18xx_default_conf.phy.number_of_assembled_ant2_4; + params.number_of_assembled_ant5 = + wl18xx_default_conf.phy.number_of_assembled_ant5; + params.external_pa_dc2dc = wl18xx_default_conf.phy.external_pa_dc2dc; + params.tcxo_ldo_voltage = wl18xx_default_conf.phy.tcxo_ldo_voltage; + params.xtal_itrim_val = wl18xx_default_conf.phy.xtal_itrim_val; + params.srf_state = wl18xx_default_conf.phy.srf_state; + params.io_configuration = wl18xx_default_conf.phy.io_configuration; + params.sdio_configuration = wl18xx_default_conf.phy.sdio_configuration; + params.settings = wl18xx_default_conf.phy.settings; + params.rx_profile = wl18xx_default_conf.phy.rx_profile; + params.primary_clock_setting_time = + wl18xx_default_conf.phy.primary_clock_setting_time; + params.clock_valid_on_wake_up = + wl18xx_default_conf.phy.clock_valid_on_wake_up; + params.secondary_clock_setting_time = + wl18xx_default_conf.phy.secondary_clock_setting_time; + + /* TODO: hardcoded for now */ + params.board_type = BOARD_TYPE_DVP_EVB_18XX; + + wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); + wl1271_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)¶ms, + sizeof(params), false); +} + +static void wl18xx_enable_interrupts(struct wl1271 *wl) +{ + wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_ALL_EVENTS_VECTOR); + + wlcore_enable_interrupts(wl); + wlcore_write_reg(wl, REG_INTERRUPT_MASK, + WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK)); +} + +static int wl18xx_boot(struct wl1271 *wl) +{ + int ret; + + ret = wl18xx_pre_boot(wl); + if (ret < 0) + goto out; + + ret = wlcore_boot_upload_nvs(wl); + if (ret < 0) + goto out; + + wl18xx_pre_upload(wl); + + ret = wlcore_boot_upload_firmware(wl); + if (ret < 0) + goto out; + + wl18xx_set_mac_and_phy(wl); + + ret = wlcore_boot_run_firmware(wl); + if (ret < 0) + goto out; + + wl18xx_enable_interrupts(wl); + +out: + return ret; +} + static struct wlcore_ops wl18xx_ops = { - .identify_chip = wl18xx_identify_chip, + .identify_chip = wl18xx_identify_chip, + .boot = wl18xx_boot, }; int __devinit wl18xx_probe(struct platform_device *pdev) diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h index 9af0c83..2916d69 100644 --- a/drivers/net/wireless/ti/wl18xx/reg.h +++ b/drivers/net/wireless/ti/wl18xx/reg.h @@ -102,6 +102,10 @@ #define WL18XX_REG_COMMAND_MAILBOX_PTR (WL18XX_SCR_PAD0) #define WL18XX_REG_EVENT_MAILBOX_PTR (WL18XX_SCR_PAD1) +#define WL18XX_EEPROMLESS_IND (WL18XX_SCR_PAD4) + +#define WL18XX_WELP_ARM_COMMAND (WL18XX_REGISTERS_BASE + 0x7100) +#define WL18XX_ENABLE (WL18XX_REGISTERS_BASE + 0x01543C) #define WL18XX_CMD_MBOX_ADDRESS 0xB007B4 @@ -109,4 +113,75 @@ #define CHIP_ID_185x_PG10 (0x06030101) +/* TODO: maybe move elsewhere? */ +#define NUM_OF_CHANNELS_11_ABG 150 +#define NUM_OF_CHANNELS_11_P 7 +#define WL18XX_NUM_OF_SUB_BANDS 9 +#define SRF_TABLE_LEN 16 +#define PIN_MUXING_SIZE 2 + +enum { + COMPONENT_NO_SWITCH = 0x0, + COMPONENT_2_WAY_SWITCH = 0x1, + COMPONENT_3_WAY_SWITCH = 0x2, + COMPONENT_MATCHING = 0x3, +}; + +enum { + FEM_NONE = 0x0, + FEM_VENDOR_1 = 0x1, + FEM_VENDOR_2 = 0x2, + FEM_VENDOR_3 = 0x3, +}; + +enum { + BOARD_TYPE_FPGA_18XX = 0, + BOARD_TYPE_HDK_18XX = 1, + BOARD_TYPE_DVP_EVB_18XX = 2, +}; + +struct wl18xx_mac_and_phy_params { + u8 phy_standalone; + u8 rdl; + u8 enable_clpc; + u8 enable_tx_low_pwr_on_siso_rdl; + u8 auto_detect; + u8 dedicated_fem; + + u8 low_band_component; + + /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ + u8 low_band_component_type; + + u8 high_band_component; + + /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ + u8 high_band_component_type; + u8 number_of_assembled_ant2_4; + u8 number_of_assembled_ant5; + u8 pin_muxing_platform_options[PIN_MUXING_SIZE]; + u8 external_pa_dc2dc; + u8 tcxo_ldo_voltage; + u8 xtal_itrim_val; + u8 srf_state; + u8 srf1[SRF_TABLE_LEN]; + u8 srf2[SRF_TABLE_LEN]; + u8 srf3[SRF_TABLE_LEN]; + u8 io_configuration; + u8 sdio_configuration; + u8 settings; + u8 rx_profile; + u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG]; + u8 pwr_limit_reference_11_abg; + u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; + u8 pwr_limit_reference_11p; + u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS]; + u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS]; + u8 primary_clock_setting_time; + u8 clock_valid_on_wake_up; + u8 secondary_clock_setting_time; + u8 board_type; + u8 padding[1]; +} __packed; + #endif /* __REG_H__ */ -- 1.7.9.5